update MC firmware to 10.37.0

NXP MC release 10.37.0 added official support for switching serdes
between 10 and 25G network speed.
This is currently only supported on LX2162 Clearfog!

Upgrade all configurations to the new MC firmware.

Tested on:
- Clearfog CX (SD=8_5_2)
- Half-Twins (SD=8S_9_2)
- LX2162 Clearfog (SD=18_9_0)

runme.sh

@@ -14,6 +14,7 @@ BUILDROOT_VERSION=2020.02.1
 # Misc
 ###############################################################################
 : ${RELEASE:=LSDK-21.08}
+: ${MC_RELEASE:=mc_release_10.37.0}
 : ${DDR_SPEED:=3200}
 : ${SERDES:=8_5_2}
 : ${UEFI_RELEASE:=RELEASE}
@@ -65,7 +66,6 @@ case "${SERDES}" in
 	8_9_*|8S_9_*)
 		DPC=dpc-8_x_usxgmii_8_x_sgmii.dtb
 		DPL=dpl-eth.8x10g.8x1g.dtb
-		MC_FORCE=patches/mc_lx2160a_10.36.0.itb
 	;;
 	2_*)
 		DPC=dpc-8_x_usxgmii.dtb
@@ -74,7 +74,6 @@ case "${SERDES}" in
 	4_5_2)
 		DPC=dpc-8_x_usxgmii.dtb
 		DPL=dpl-eth.8x10g.19.dtb
-		MC_FORCE=patches/mc_lx2160a_10.32.0.itb
 		DEFAULT_FDT_FILE="fsl-lx2160a-clearfog-cx.dtb"
 	;;
 	4_*)
@@ -84,7 +83,6 @@ case "${SERDES}" in
 	8_*|8S_*)
 		DPC=dpc-8_x_usxgmii.dtb
 		DPL=dpl-eth.8x10g.19.dtb
-		MC_FORCE=patches/mc_lx2160a_10.32.0.itb
 	;;
 	10S_*)
 		DPC=dpc-S1_10-S2_0-6x_usxgmii.dtb
@@ -126,31 +124,26 @@ case "${SERDES}" in
 		DPC=LX2162-USOM/clearfog-s1_0-s2_0-dpc.dtb
 		DPL=LX2162-USOM/clearfog-s1_0-s2_0-dpl.dtb
 		DEFAULT_FDT_FILE="fsl-lx2162a-clearfog.dtb"
-		MC_FORCE=patches/mc_lx2160a_10.36.0.itb
 	;;
 	LX2162A_CLEARFOG_3_7_*)
 		DPC=LX2162-USOM/clearfog-s1_3-s2_7-dpc.dtb
 		DPL=LX2162-USOM/clearfog-s1_3-s2_7-dpl.dtb
 		DEFAULT_FDT_FILE="fsl-lx2162a-clearfog.dtb"
-		MC_FORCE=patches/mc_lx2160a_10.36.0.itb
 	;;
 	LX2162A_CLEARFOG_3_9_*)
 		DPC=LX2162-USOM/clearfog-s1_3-s2_9-dpc.dtb
 		DPL=LX2162-USOM/clearfog-s1_3-s2_9-dpl.dtb
 		DEFAULT_FDT_FILE="fsl-lx2162a-clearfog.dtb"
-		MC_FORCE=patches/mc_lx2160a_10.36.0.itb
 	;;
 	LX2162A_CLEARFOG_3_11_*)
 		DPC=LX2162-USOM/clearfog-s1_3-s2_7-dpc.dtb
 		DPL=LX2162-USOM/clearfog-s1_3-s2_7-dpl.dtb
 		DEFAULT_FDT_FILE="fsl-lx2162a-clearfog.dtb"
-		MC_FORCE=patches/mc_lx2160a_10.36.0.itb
 	;;
 	LX2162A_CLEARFOG_18_9_*)
 		DPC=LX2162-USOM/clearfog-s1_3-s2_9-dpc.dtb
 		DPL=LX2162-USOM/clearfog-s1_3-s2_9-dpl.dtb
 		DEFAULT_FDT_FILE="fsl-lx2162a-clearfog.dtb"
-		MC_FORCE=patches/mc_lx2160a_10.36.100.itb
 	;;
 	*)
 		echo "Please define SERDES configuration"
@@ -402,7 +395,7 @@ fi
 
 if [[ ! -d $ROOTDIR/build/qoriq-mc-binary ]]; then
 	cd $ROOTDIR/build
-	git clone $SHALLOW_FLAG https://github.com/NXP/qoriq-mc-binary.git -b $RELEASE
+	git clone $SHALLOW_FLAG https://github.com/NXP/qoriq-mc-binary.git -b $MC_RELEASE
 fi
 
 ###############################################################################