Adjust for debian 10.

examples/lime2-mod-io-relay-on_off.py

@@ -41,8 +41,6 @@ root@a20-olinuxino:~# apt update
 root@a20-olinuxino:~# apt upgrade
 root@a20-olinuxino:~# reboot now
 
-# XXX: had to set DNS in /etc/resolv.conf to 8.8.8.8 instead of 127.0.0.57
-
 # install python
 olimex@a20-olinuxino:~$ sudo bash
 root@a20-olinuxino:~# apt install python3
@@ -50,7 +48,7 @@ root@a20-olinuxino:~# apt install python3-venv python3-pip
 root@a20-olinuxino:~# python3 -m pip install --upgrade pip setuptools wheel
 root@a20-olinuxino:~# pip3 install pyA20Lime2
 
-# enable i2c-1 by running and selecting it (temporary step until fixed by Olimex)
+# enable i2c-1 by running and selecting it (temporary step until fixed by Olimex but not needed for debian 10!)
 root@a20-olinuxino:~# olinuxino-overlay
 
 # prove it's enabled by
@@ -58,7 +56,6 @@ root@a20-olinuxino:~# i2cdetect -r 1  # should show  0х58 is available
 
 # connect MOD-IO through UEXT cable to UEXT2 at LIME2-SHIELD and power it (12V adapter)
 
-
 II. finally run this script as root, you should see RELAY1's led showing green color.
 
 III. Integration with Nexedi's toolset for Wendelin