Make grandenet more understandable.

net-misc/re6stnet/files/grandenet

@@ -7,31 +7,43 @@ configfile="${configdir}/re6stnet.conf"
 # shill should not care about these interfaces
 blacklist_option="re6stnet-tcp,re6stnet10,re6stnet9,re6stnet8,re6stnet7,re6stnet6,re6stnet5,re6stnet4,re6stnet3,re6stnet2,re6stnet1,tun0,tun1,tun2"
 
+# Require script to be run via sudo, but not as root
+if [[ $EUID != 0 ]]; then
+    echo "This script requires root privileges! However, it may fail if running with root user. Please, run it again and prefix the command by 'sudo'."
+    exit 1
+fi
 
 function configure {
-    configoptions=()
-    
-    echo "You are going to generate all the files needed to be able to join the Grandenet network, based on re6st: a resilient overlay mesh network providing IPv6 over IPv4."
-    read -p "token (you can get one on http://www.grandenet.cn): " token
+    configoptions=('default')
+
+    echo "
+################ New configuration generation ####################
+"
+    read -p "Please, give your token (you can get one on http://www.grandenet.cn): " token
     if [ "${token}" == "" ] ; then
         echo "No token given. Exiting."
         exit 1
     fi
-    
-    read -p "registry [http://re6stnet.grandenet.cn]: " registry
+
+    read -p "Give the registry you want to use [http://re6stnet.grandenet.cn]: " registry
     if [ "${registry}" == "" ] ; then
         registry="http://re6stnet.grandenet.cn"
     fi
-    
-    read -p "set re6st route as default [Y/n]? " default
-    if [ "${default}" != "n" -a "${default}" != "N" ] ; then
-        configoptions+=('default')
+
+
+    # do not assume everything is clean already
+    if [[ -f ${configdir} ]] ; then
+        echo "A file called ${configdir} has been found and removed."
+        rm "${configdir}"
+    elif [[ $(ls -A "${configdir}"/* 2> /dev/null) ]] ; then
+        echo "Some files are into ${configdir}. Moving them to directory ${configdir}/old"
+        install -d ${configdir}/old && mv "${configdir}"/* "${configdir}/old" 2> /dev/null
     fi
-    
-    re6st-conf --registry "${registry}" --token "${token}" --dir "${configdir}"
-    
+
+    re6st-conf --registry "${registry}" --token "${token}" --dir "${configdir}" || { echo "An error occured while generating the configuration. Created files in '${configdir}': " ; ls "${configdir}" ; echo "Exiting." ; exit 1 ;}
+
     printf '%s\n' "${configoptions[@]}" >> "${configfile}"
-    
+
     echo "
 :FORWARD ACCEPT [0:0]
 :OUTPUT DROP [0:0]
@@ -42,19 +54,18 @@ function configure {
 -A OUTPUT -p udp -m udp --dport 6696 -j ACCEPT
 -A OUTPUT -p udp -m udp --dport 326 -j ACCEPT
 " > "${configdir}/ip6tables.conf"
-    
-    read -p "save configuration on an external device [Y/n]? " save
+
+    read -p "Save configuration on an external device [Y/n]? " save
     if [ "$save" != "n" -a "$save" != "N" ] ; then
-        save=1
         if [[ $(ls -d "${mountpoint}"/*) ]]; then
-            echo "Detected external partitions:"
+            echo "Mounted external partitions list:"
             for mnt in "${mountpoint}"/* ; do
                 echo "    * $mnt"
             done
         else
-            echo "no external device partition mounted on ${mountpoint}"
+            echo "No external device partition mounted on ${mountpoint}."
         fi
-        read -e -p "Where the configuration directory should be saved (use tabulation for autocompletion): " place
+        read -e -p "A folder called 're6stconf' will be generated in order to backup the freshly created configuration. Where should it be created (use tabulation for autocompletion)? " place
         place+="/re6stconf"
         echo "configuration will be saved in $place"
 
@@ -63,24 +74,29 @@ function configure {
             install "${file}" "${place}"
         done
     else
-        echo "Configuration will be placed in ${configfile}, please do a manual backup later or you could lose your access to this network."
+        echo -e "Configuration will be placed in ${configdir},\e[31m please do a manual backup later or you could lose your access to this network\e[0m."
     fi
-    
+    echo "
+##################################################################
+"
 }
 
 
 echo "After answering a few questions, you will connect to the Grandenet network, based on re6st, a resilient overlay mesh network providing IPv6."
 if [[ $(pgrep re6stnet) ]] ; then
-    read -p "re6stnet is already running. Stop it [y/N] ?" stop
+    read -p "re6stnet is already running. Stop it [y/N]? " stop
     if [ "$stop" == "y" -o "$stop" == "Y" ] ; then
         echo "Killing re6stnet process..."
         killall re6stnet
+        # XXX: should only kill other grandenet processes...
+        killall grandenet
     else
         echo "Exiting."
         exit 0
     fi
 fi
 
+
 # there may be a configuration already installed
 usefound="n"
 path=""
@@ -96,8 +112,8 @@ fi
 # try to find a saved configuration
 if [ ! -r "${configfile}" ] ; then
     echo "Looking for configuration directory on external devices..."
-    if [[ $(find "${mountpoint}" -type d | grep re6stconf) ]] ; then
-        path=$(find "${mountpoint}" -type d | grep -m 1 re6stconf)
+    path=$(find "${mountpoint}" -maxdepth 3 -type d | grep re6stconf)
+    if [ "${path}" != "" ] ; then
         read -p "Use configuration directory found at: ${path} [Y/n]? " usefound
     else
         echo "No configuration directory was found."
@@ -106,34 +122,36 @@ fi
 
 install -d "${configdir}"
 
-# don't use possibly found configuration(s)
+# don't use possibly found configuration(s) if specified
 if [ "$usefound" == "n" -o "$usefound" == "N" ]; then
-    read -p "Manually give the path (p) or generate new (n) configuration [p/N]? " action
-    if [ "${action}" == "P" -o "${action}" == "p" ] ; then
+    read -p "Do you already have a valid configuration that you would like to use (u) or do you need to generate a new configuration (n) [u/N]? " action
+    if [ "${action}" == "U" -o "${action}" == "u" ] ; then
         read -e -p "Please give a path to the directory containing the re6stnet configuration if you already generated one: " path
         if [ "$path" == "" ] ; then
             echo "No configuration path given. Exiting."
             exit 1
         fi
     else
-        configure || ( echo "Problem occured while generating new configuration. Exiting." && exit 1 )
-        path=${configdir}
+        configure || { echo "Problem occured while generating new configuration. Exiting." ; exit 1 ; }
+        path="${configdir}"
     fi
 fi
 
-# copy the config if needed got by previous steps
-if [ ${path} == ${configdir} ]; then
-    echo "Using configuration in place."
+# copy the config if needed 
+if [ "${path}" == "${configdir}" -a -r "${path}/re6stnet.conf" -a -r "${path}/cert.crt" -a -r "${path}/cert.key" -a -r "${path}/ca.crt" ]; then
+    echo "Using existing configuration in '${configdir}'."
 elif [ ! -d "$path" ] ; then
-    echo "Invalid path '${path}'. Exiting."
+    echo "Invalid path: '${path}' is not a directory. Exiting."
     exit 1
 elif [ -r "${path}/re6stnet.conf" -a -r "${path}/cert.crt" -a -r "${path}/cert.key" -a -r "${path}/ca.crt" ]; then
-    echo "Copying config to '${configdir}'."
+    echo "Copying config to '${configdir}'..."
     for file in "${path}"/* ; do
         install -m 600 "${file}" "${configdir}"
     done
 else
-    echo "Missing some configuration files in '${path}'. Exiting."
+    echo "Some configuration files are missing in '${path}' so it is not possible to connect to grandenet. Files present are:"
+    ls ${path}
+    echo "Try generating another configuration or use a different one next time. Exiting."
     exit 1
 fi
 
@@ -143,41 +161,23 @@ cp "${configdir}/ip6tables.save" "${configdir}/current_ip6tables.conf"
 
 # function to clean up and exit
 cleanup() {
-  printf "\nCleaning up and exiting...\n"
-  if [ -r "${configdir}/ip6tables.save" ] ; then
-       echo "Removing changes in ip6tables rules"
-       ip6tables-restore < "${configdir}/ip6tables.save"
-       rm "${configdir}/ip6tables.save"
-       rm "${configdir}/current_ip6tables.conf"
-  fi
-  echo ""
-  exit 0
+    echo "
+#################### Cleaning up #################################
+"
+    printf "\nCleaning up and exiting...\n"
+    if [ -r "${configdir}/ip6tables.save" ] ; then
+         echo "Removing changes in ip6tables rules"
+         ip6tables-restore < "${configdir}/ip6tables.save"
+         rm "${configdir}/ip6tables.save"
+         rm "${configdir}/current_ip6tables.conf"
+    fi
+    echo "Stop allowing IPv6 forwarding..."
+    sysctl net.ipv6.conf.all.forwarding=0 > /dev/null
+    exit 0
 }
 
 trap cleanup SIGHUP SIGINT SIGTERM
 
-# firewall configuration
-if [ -r "${configdir}/ip6tables.conf" ] ; then
-    # remove line containing "COMMIT"
-    sed -i '/COMMIT/d' "${configdir}/current_ip6tables.conf"
-    # add few rules
-    cat "${configdir}/ip6tables.conf" >> "${configdir}/current_ip6tables.conf"
-    # putting "COMMIT" line back
-    echo "COMMIT" >> "${configdir}/current_ip6tables.conf"
-    ip6tables-restore < "${configdir}/current_ip6tables.conf"
-else
-    # accept ports needed for re6stnet
-    ip6tables -P FORWARD ACCEPT
-    ip6tables -A OUTPUT -p udp --dport 6696 -j ACCEPT
-    ip6tables -A OUTPUT -p udp --dport 326 -j ACCEPT
-    ip6tables -A INPUT -p udp --dport 6696 -j ACCEPT
-    ip6tables -A INPUT -p udp --dport 326 -j ACCEPT
-
-    # Accept ports needed for running any webrunner
-    ip6tables  -A INPUT -p tcp --dport 9684 -j ACCEPT
-    ip6tables  -A INPUT -p tcp --dport 50005 -j ACCEPT
-fi
-
 # setup shill network manager
 if [[ $( pgrep -a shill | grep ${blacklist_option} ) ]] ; then
     echo "shill was started with the right blacklist."
@@ -196,47 +196,47 @@ else
         for i in {0..4} ; do
             echo -n "." ; sleep 1
         done
-echo ""
+        echo ""
     fi
 fi
 
-read -p "Should the interface accept router advertisement via IPv6 [y/N]? " accept_ra
-
-interface="$( ip -o link show | grep 'state UP' | awk -F': ' '{print $2}')"
 
-read -p "Is '${interface}' the name of the interface that is used to access the Internet (via IPv4) [Y/n]? " confirm
+# firewall configuration
+if [ -r "${configdir}/ip6tables.conf" ] ; then
+    # remove line containing "COMMIT"
+    sed -i '/COMMIT/d' "${configdir}/current_ip6tables.conf"
+    # add few rules
+    cat "${configdir}/ip6tables.conf" >> "${configdir}/current_ip6tables.conf"
+    # putting "COMMIT" line back
+    echo "COMMIT" >> "${configdir}/current_ip6tables.conf"
+    ip6tables-restore < "${configdir}/current_ip6tables.conf"
+else
+    # accept ports needed for re6stnet
+    ip6tables -P FORWARD ACCEPT
+    ip6tables -A OUTPUT -p udp --dport 6696 -j ACCEPT
+    ip6tables -A OUTPUT -p udp --dport 326 -j ACCEPT
+    ip6tables -A INPUT -p udp --dport 6696 -j ACCEPT
+    ip6tables -A INPUT -p udp --dport 326 -j ACCEPT
 
-if [ "$confirm" != "y" -a "$confirm" != "Y" -a "$confirm" != "" ] ; then
-    echo "running interfaces found:"
-    echo "$( ip -o link show | awk -F': ' '{print $2}' )"
-    read -p "name of the interface used to access the Internet (via IPv4): " interface
+    # Accept ports needed for running any webrunner
+    ip6tables  -A INPUT -p tcp --dport 9684 -j ACCEPT
+    ip6tables  -A INPUT -p tcp --dport 50005 -j ACCEPT
 fi
 
-if [ accept_ra == "y" -o accept_ra == "Y" ] ; then
-    sysctl net.ipv6.conf."${interface}".accept_ra=1
-else
-    sysctl net.ipv6.conf."${interface}".accept_ra=0
-fi
+sysctl net.ipv6.conf.all.accept_ra=1
+sysctl net.ipv6.conf.all.forwarding=1
 
 echo "re6st will start, it may take a few minutes before beeing usable"
 # wait a bit, so the user can see it and the message is not lost among re6st log
 for i in {0..2} ; do
-    echo -n "." ; sleep 1
+    sleep 1
 done
 echo ""
 
-while [[ $( grep default "${configfile}" ) && $( ip -6 r | grep default ) ]] ; do
-    printf "Default route was found for interface '${interface}':\n    $( ip -6 r | grep default )\nwhereas option 'default' is in ${configfile}.\n"
-    read -p "Use ip route (i) or try restarting shill (s) [I/s]: " choice
-    if [ "$choice" != "s" -a "$confirm" != "S" ] ; then
-        route="$( ip -6 r | grep default | sed 's/ dev .*//' )"
-        ip -6 route del ${route}
-        echo removed route: "${route}"
-    else
-        restart shill BLACKLISTED_DEVICES="${blacklist_option}"
-    fi
-done
+echo "
+######################### re6st logs #############################
+"
 
 # join re6st network
 cd "${configdir}"
-re6stnet @re6stnet.conf
+re6stnet @re6stnet.conf
\ No newline at end of file