Fix slapos node configure problem in the Windows 7

windows/docs/using-slapos-in-windows.xml

@@ -57,6 +57,7 @@
 <itemizedlist>
 <listitem><para>SlapOS Desktop</para></listitem>
 <listitem><para>Node Runner</para></listitem>
+<listitem><para>SlapOS Node</para></listitem>
 <listitem><para>Command Console</para></listitem>
 <listitem><para>Configure SlapOS</para></listitem>
 <listitem><para>User Guide</para></listitem>
@@ -69,6 +70,9 @@
 <para>Node Runner is a web based development tool which uses slapgrid to install and instantiate the software, and it could be used to manage your slapos slave node in your computer.</para>
 <para>Refer to <ulink url="http://community.slapos.org/wiki/osoe-Lecture.SlapOS.Extended/developer-Howto.Use.SlapOS.Web.Runner.html5"/></para>
 </section>
+<section><title>SlapOS Node</title>
+<para>It's used to format slapos node, release software and create instance, you an run it at any time.</para>
+</section>
 <section><title>Command Console</title>
 <para>It will open a terminal, here you can run most of slapos command, 
 <programlisting>
@@ -191,10 +195,10 @@ Refer to: http://community.slapos.org/wiki/osoe-Lecture.SlapOS.Extended/develope
 D:
 MD slapos
 CD slapos
-SET PACKAGES=-P autobuild -P autoconf -P automake -P autossh -P binutils -P bison -P bzip2 -P ca-certificates -P cron -P curl -P cygport -P cygrunsrv -P file -P flex -P gcc4 -P gdbm -P libgdbm-devel -P gettext -P gettext-devel -P libglib2.0-devel -P libglib2.0_0 -P libexpat1 -P libexpat1-devel -P libmpfr-devel -P libmpfr4 -P libtool -P libxml2 -P libxml2-devel -P libxslt -P libxslt-devel -P make -P m4 -P libncurses-devel -P libncursesw-devel -P patch -P patchutils -P pkg-config -P python -P python-setuptools -P openssh -P openssl-devel -P libopenssl098 -P libopenssl100 -P popt -P readline -P libsqlite3-devel -P libsqlite3_0 -P swig -P syslog-ng -P zlib-devel -P vim -P wget -P docbook-utils
+SET PACKAGES=-P autobuild -P autoconf -P automake -P autossh -P binutils -P bison -P bzip2 -P ca-certificates -P cron -P curl -P cygport -P cygrunsrv -P file -P flex -P gcc4 -P gdbm -P libgdbm-devel -P gettext -P gettext-devel -P libglib2.0-devel -P libglib2.0_0 -P libexpat1 -P libexpat1-devel -P libmpfr-devel -P libmpfr4 -P libtool -P libxml2 -P libxml2-devel -P libxslt -P libxslt-devel -P make -P m4 -P libncurses-devel -P libncursesw-devel -P patch -P patchutils -P pkg-config -P python -P python-setuptools -P openssh -P openssl-devel -P libopenssl098 -P libopenssl100 -P popt -P readline -P libsqlite3-devel -P libsqlite3_0 -P swig -P syslog-ng -P zlib-devel -P vim -P wget
 MOVE d:\temp\setup.exe .\
 setup.exe %PACKAGES% --no-verify -D -L -l D:\slapos\cygwin-packages -R D:\slapos\cygwin -s http://www.netgull.com/cygwin
-</programlisting>Waiting for the installer finished.</para></listitem>
+</programlisting>Waiting for the installer finished. -P docbook-utils</para></listitem>
 </itemizedlist>
 A cygwin icon will be added in the windows desktop, click it to enter cygwin box, then run the following commands:
 <!--
@@ -212,7 +216,9 @@ start mintty.exe -i /Cygwin-Terminal.ico -
 <programlisting>
 echo "export CYGWIN=server" >> ~/.bash_profile
 sed -i -e "s/4\.3\.4/4.5.3/g" /usr/bin/libtool
-cp /etc/password /etc/password.orig
+[[ -f /etc/passwd ]] || mkpasswd > /etc/passwd
+[[ -f /etc/group ]] || mkgroup > /etc/group
+cp /etc/passwd /etc/passwd.orig
 myaccount=$(grep "^Administrator:" /etc/passwd | \
               sed -e "s/Administrator:unused:500:/root:unused:0:/g")
 echo $myaccount >> /etc/passwd
@@ -243,7 +249,7 @@ mkdir -p /opt/slapos
 mkdir -p /opt/download-cache
 cd /opt/slapos
 echo "[buildout]
-extends = http://git.erp5.org/gitweb/slapos.git/blob_plain/refs/tags/cygwin-0:/component/slapos/buildout.cfg
+extends = http://git.erp5.org/gitweb/slapos.git/blob_plain/refs/heads/cygwin-0:/component/slapos/buildout.cfg
 download-cache = /opt/download-cache
 prefix = ${buildout:directory}
 " > buildout.cfg 
@@ -255,9 +261,9 @@ Now we need patch slapos.core for supporting cygwin, after these code are merged
 <programlisting>
 cd /opt
 wget http://www.dashingsoft.com/products/slapos/slapos-patches.tar.gz
-tar xzf slapos-patches.tar.gz
-cd eggs/slapos.core-0.35-py2.7.egg/slapos
-patch -p1 &lt; /opt/patches/slapos-core.patch
+tar xzf slapos-patches.tar.gz --no-same-owner
+cd /opt/slapos/eggs/slapos.core-0.35-py2.7.egg
+patch -p1 &lt; /opt/patches/slapos-core-format.patch
 </programlisting>
 It seems netifaces.dll need to rebase, 
 <programlisting>
@@ -282,7 +288,6 @@ git clone -b cygwin http://git.erp5.org/repos/slapos.package.git
 Then build babeld and openvpn for cygwin, we need use the sources in the slapos.package.git, they are patched for cygwin:
 <programlisting>
 cd /opt/git/slapos.package/windows/babeld
-# If your os is windows xp, type the following command, otherwise type make only.
 make WINVER=XP
 cp babeld.exe /usr/local/bin
 
@@ -308,7 +313,7 @@ Download pyOpenSSL-0.13.tar.gz, miniupnpc-1.8.tar.gz,
 <programlisting>
 mkdir -p /opt/downloads
 cd /opt/downloads
-wget --no-verify-certificate https://pypi.python.org/packages/source/p/pyOpenSSL/pyOpenSSL-0.13.tar.gz#md5=767bca18a71178ca353dff9e10941929
+wget --no-check-certificate https://pypi.python.org/packages/source/p/pyOpenSSL/pyOpenSSL-0.13.tar.gz#md5=767bca18a71178ca353dff9e10941929
 wget http://miniupnp.free.fr/files/download.php?file=miniupnpc-1.8.tar.gz -O miniupnpc-1.8.tar.gz
 </programlisting>
 Get re6stnet for cygwin
@@ -323,8 +328,8 @@ Get the icons and openvpn drivers
 cd /opt
 wget http://www.dashingsoft.com/products/slapos/images.tar.gz
 wget http://www.dashingsoft.com/products/slapos/openvpn-driver.tar.gz
-tar xzf images.tar.gz
-tar xzf openvpn-driver.tar.gz
+tar xzf images.tar.gz --no-same-owner
+tar xzf openvpn-driver.tar.gz --no-same-owner
 </programlisting>
 </para>
 </section>

windows/scripts/slapos-all-in-one.iss

@@ -59,6 +59,7 @@ Source: "opt\openvpn\bin\devcon.exe"; DestDir: "{app}\cygwin\usr\local\bin";
 Source: "opt\openvpn\driver\*"; DestDir: "{app}\cygwin\etc\slapos\driver";
 
 Source: "opt\git\slapos.package\windows\scripts\init-slapos-node.sh"; DestDir: "{app}\cygwin\etc\slapos\scripts";
+Source: "opt\git\slapos.package\windows\scripts\slapos-node.sh"; DestDir: "{app}\cygwin\etc\slapos\scripts";
 Source: "opt\git\slapos.package\windows\scripts\post-install.sh"; DestDir: "{app}\cygwin\etc\slapos\scripts";
 Source: "opt\git\slapos.package\windows\scripts\build-slapos.sh"; DestDir: "{app}\cygwin\etc\slapos\scripts";
 Source: "opt\git\slapos.package\windows\scripts\slapos-configure.sh"; DestDir: "{app}\cygwin\etc\slapos\scripts";
@@ -71,15 +72,13 @@ Source: "opt\git\slapos.package\windows\docs\README.cygwin"; DestDir: "{app}"; D
 [Icons]
 Name: "{commondesktop}\SlapOS Desktop"; Filename: "https://www.slapos.org/"; IconFilename: "{app}\cygwin\etc\slapos\images\slapos.ico";
 Name: "{group}\SlapOS Desktop"; Filename: "https://www.slapos.org/"; IconFilename: "{app}\cygwin\etc\slapos\images\slapos.ico";
-Name: "{group}\Node Runner"; Filename: "{app}\cygwin\bin\mintty.exe"; Parameters: "-w hide -l /var/log/slapos-node-runner.log /etc/slapos/scripts/slapos-node-runner.sh"; WorkingDir: "{app}\cygwin\bin"; IconFilename: "{app}\cygwin\etc\slapos\images\manager.ico";
-; Name: "{group}\SlapOS Console"; Filename: "{app}\cygwin\bin\mintty.exe"; Parameters: "-c ~/.minttyrc -h always -t ""SlapOS Console"" /opt/slapos/bin/slapconsole /etc/opt/slapos/slapos.cfg"; WorkingDir: "{app}\cygwin\bin"; IconFilename: "{app}\cygwin\etc\slapos\images\terminal.ico";
+Name: "{group}\Node Runner"; Filename: "{app}\cygwin\bin\mintty.exe"; Parameters: "-w hide -h never -l /var/log/slapos-node-runner.log /etc/slapos/scripts/slapos-node-runner.sh"; WorkingDir: "{app}\cygwin\bin"; IconFilename: "{app}\cygwin\etc\slapos\images\manager.ico";
+Name: "{group}\SlapOS Node"; Filename: "{app}\cygwin\bin\bash.exe"; Parameters: "--login -i /etc/slapos/scripts/slapos-node.sh"; WorkingDir: "{app}\cygwin\bin"; IconFilename: "{app}\cygwin\etc\slapos\images\node.ico";
 Name: "{group}\Command Console"; Filename: "{app}\cygwin\cygtty.bat";  WorkingDir: "{app}\cygwin\opt\slapos"; IconFilename: "{app}\cygwin\etc\slapos\images\terminal.ico";
-Name: "{group}\Configure SlapOS"; Filename: "{app}\cygwin\bin\mintty.exe"; Parameters: "-c ~/.minttyrc -t ""Configure SlapOS Client"" /etc/slapos/scripts/slapos-client-config.sh"; WorkingDir: "{app}\cygwin\bin"; IconFilename: "{app}\cygwin\etc\slapos\images\configure.ico";
-; Name: "{group}\Configure Node"; Filename: "{app}\cygwin\bin\mintty.exe"; Parameters: "-c ~/.minttyrc -t ""Configure SlapOS Node"" /etc/slapos/scripts/slapos-node-config.sh"; WorkingDir: "{app}\cygwin\bin"; IconFilename: "{app}\cygwin\etc\slapos\images\node.ico";
+Name: "{group}\Configure SlapOS"; Filename: "{app}\cygwin\bin\mintty.exe"; Parameters: "-c ~/.minttyrc -h never -t ""Configure SlapOS Client"" /etc/slapos/scripts/slapos-client-config.sh"; WorkingDir: "{app}\cygwin\bin"; IconFilename: "{app}\cygwin\etc\slapos\images\configure.ico";
 Name: "{group}\User Guide"; Filename: "{app}\user-guide.html";
 Name: "{group}\Uninstall SlapOS"; Filename: "{uninstallexe}";
 
-
 [Run]
 Filename: "{app}\setup-cygwin.bat"; Parameters: """{app}"""; StatusMsg: "Installing Cygwin..."; Flags: runhidden;
 Filename: "{app}\cygwin\bin\bash.exe"; Parameters: "--login -i /etc/slapos/scripts/post-install.sh"; WorkingDir: "{app}\cygwin\bin"; Description: "Configure Cygwin"; StatusMsg: "Configure Cygwin..."; Flags: skipifdoesntexist runhidden;

windows/scripts/slapos-configure.sh

+#! /bin/bash
+#
+# Configure slapos node, it could be run at anytime to check the
+# configure of slapos node. The main functions:
+#
+#     * Install msloop network adapter, named to re6stnet-lo
+#
+#        It'll used as main interface for slapos and re6stnet
+#
+#     * ipv6: Ipv6 configure
+#
+#     * re6stnet: Install re6stnet and register to nexedi re6stnet if it hasn't
+#
+#     * node: Create node configure file by parameters ca/key
+#
+#     * client: Create client configure file by parameters ca/key
+#
+#     * cron: start/stop cron configure.
+#
+# Usage:
+#
+#    ./slapos-node-config [ * | ipv6 | re6stnet | node | client | cron ]
+#
+export PATH=/usr/local/bin:/usr/bin:$PATH
+
+#
+# Return connection name by line, and replace space with '%'
+#
+function get_all_connections()
+{
+    netsh interface ipv6 show interface | \
+    grep "^[ 0-9]\+ " | \
+    sed -e "s/^[ 0-9]\+[a-zA-Z]\+//" -e "s/^\s*//" -e "s/ /%/g"
+}
+
+#
+# Check all the connection names, and compare the original connection
+# list, return the new connection name
+#
+# If nothing found, return empty
+# If more than one, return the first one
+#
+function get_new_connection()
+{
+    original_connections=" $* "
+    current_connections=$(get_all_connections)
+
+    for name in $current_connections ; do
+        [[ ! "$original_connections" == *[\ ]$name[\ ]* ]] && \
+        echo ${name//%/ } && return 0
+    done
+}
+
+#
+# Remove all ipv4/ipv6 addresses in the connection re6stnet-lo
+#
+function reset_connection()
+{
+    ifname=${1-re6stnet-lo}
+    for addr in $(netsh interface ipv6 show address $ifname level=normal | \
+                grep "^Manual" | \
+                sed -e "s/^\(\w\+\s\+\)\{4\}//") ; do
+        netsh interface ipv6 del address $ifname $addr
+    done
+    netsh interface ip set address $ifname source=dhcp
+    # for addr in $(netsh interface ip show address $ifname | \
+    #             grep "IP Address:" | \
+    #             sed -e "s/IP Address://") ; do
+    #     netsh interface del address $ifname $addr
+    # done
+}
+
+#
+# Transfer connection name to GUID
+#
+function connection2guid()
+{
+    ifname=${1-re6stnet-lo}
+    # This command doesn't work in the Windows 7/8, maybe Vista
+    # netsh interface ipv6 show interface $ifname | \
+    #     grep "^GUID\s*:" | \
+    #     sed -e "s/^GUID\s*:\s*//"
+    getmac /fo list /v | grep -A3 "^Connection Name: *$ifname\$" \
+        | grep "^Transport Name:" | sed -e "s/^.*Tcpip_//g"
+}
+
+#
+# Show error message and waiting for user to press any key quit
+#
+function show_error_exit()
+{
+    msg=${1-Failed to configure Slapos Node in this computer.}
+    echo $msg
+    read -n 1 -p "Press any key to exit..."
+    exit 1
+}
+
+#
+# Query the parameter, usage:
+#
+#   query_parameter Actual Excpeted Message
+#
+function query_parameter()
+{
+    if [[ X$1 == X || $1 == "*" || $1 == "all" ]] ; then
+        return 1
+    fi
+    if [[ $1 == "?" || $1 == "query"]] ; then
+        read -n 1 -p $3 user_ack
+        if [[ X$user_ack == X[Yy] ]] ; then
+            return 1
+        else
+            return 0
+        fi
+    fi
+    if [[ $1 == $2 ]] ; then
+        return 1
+    fi
+    return 0
+}
+
+slapos_client_home=~/.slapos
+client_configure_file=$slapos_client_home/slapos.cfg
+client_certificate_file=$slapos_client_home/certificate
+client_key_file=$slapos_client_home/key
+client_template_file=/etc/slapos/slapos-client.cfg.example
+
+node_certificate_file=/etc/opt/slapos/ssl/computer.crt
+node_key_file=/etc/opt/slapos/ssl/computer.key
+node_config_file=/etc/opt/slapos/slapos.cfg
+node_template_file=/etc/slapos/slapos.cfg.example
+run_key='\HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run'
+slapos_run_entry=SlapOS-Node
+slapos_ifname=re6stnet-lo
+
+#
+# Add msloop network adapter, ane name it as "re6stnet-lo"
+#
+echo Checking slapos network adapter: $slapos_ifname ...
+original_connections=$(echo $(get_all_connections))
+if [[ ! " $original_connections " == *[\ ]$slapos_ifname[\ ]* ]] ; then
+    echo Installing slapos network adapter ...
+    devcon install $WINDIR\\inf\\netloop.inf *MSLOOP
+    connection_name=$(get_new_connection $original_connections)
+    [[ "X$connection_name" == "X" ]] && \
+        show_error_exit "Add msloop network adapter failed."
+    echo
+    netsh interface set interface name="$connection_name" newname="$slapos_ifname"
+fi
+reset_connection $slapos_ifname
+echo SlapOS network adapter OK.
+
+#
+# Generate Node Configure file
+#
+echo
+echo Before continue to configure, make sure you have register your server to
+echo slapos.org community Cloud, and have obtained X509 certificate and key
+echo which are needed for the following configuration process.
+echo
+echo Refer to http://community.slapos.org/wiki/osoe-Lecture.SlapOS.Extended/developer-Installing.SlapOS.Slave.Node.Source
+echo
+
+mkdir -p /etc/opt/slapos/ssl/partition_pki
+
+if [[ ! -f $node_certificate_file ]] ; then
+    read -p "Where is certificate file: " certificate_file
+    [[ ! -f "$certificate_file" ]] && \
+        show_error_exit "Certificate file $certificate_file doesn't exists."
+    echo "Copy certificate from $certificate_file to $node_certificate_file"
+    certificate_file=$(cygpath -u $certificate_file)
+    cp $certificate_file $node_certificate_file
+fi
+
+if [[ ! -f $node_key_file ]] ; then
+    read -p "Where is key file: " key_file
+    [[ ! -f "$key_file" ]] && \
+        show_error_exit "Key file $key_file doesn't exists."
+    echo "Copy key from $key_file to $node_key_file"
+    key_file=$(cygpath -u $key_file)
+    cp $key_file $node_key_file
+fi
+
+if [[ "$1" == COMP-+([0-9]) ]] ; then
+    computer_id=$1
+else
+    [[ "X$1" == "X" ]] || echo "Invalid computer id: $1"
+    echo
+    echo Please input computer id you have registered, it looks like COMP-XXXX
+    read -p "computer id: " computer_id
+fi
+
+[[ "$computer_id" == COMP-+([0-9]) ]] || \
+    show_error_exit "Invalid computer id specified."
+
+# Hope it will not confilct with original network in the local machine
+ipv4_local_network=10.201.67.0/24
+
+# Add ipv4 address
+ip -4 addr add $ipv4_local_network dev $slapos_ifname
+
+# Create node configure file, replace interface_name with guid of
+# re6stnet-lo
+
+if [[ ! -f $node_config_file ]] ; then
+    [[ -f $node_template_file ]] || \
+        (cd /etc/slapos; wget http://git.erp5.org/gitweb/slapos.core.git/blob_plain/HEAD:/slapos.cfg.example) || \
+        show_error_exit "Download slapos.cfg.example failed."
+    cp $node_template_file $node_config_file
+fi
+
+interface_guid=$(connection2guid $slapos_ifname)
+# generate /etc/slapos/slapos.cfg
+sed -i  -e "s%^\\s*interface_name.*$%interface_name = $interface_guid%" \
+        -e "s%^#\?\\s*ipv6_interface.*$%# ipv6_interface =%g" \
+        -e "s%^ipv4_local_network.*$%ipv4_local_network = $ipv4_local_network%" \
+        -e "s%^computer_id.*$%computer_id = $computer_id%" \
+        $node_config_file
+
+
+if [[ ! -f $client_certificate_file ]] ; then
+    read -p "Where is certificate file: " certificate_file
+    [[ ! -f "$certificate_file" ]] && \
+        show_error_exit "Certificate file $certificate_file doesn't exists."
+    echo "Copy certificate from $certificate_file to $client_certificate_file"
+    certificate_file=$(cygpath -u $certificate_file)
+    cp $certificate_file $client_certificate_file
+fi
+
+if [[ ! -f $client_key_file ]] ; then
+    read -p "Where is key file: " key_file
+    [[ ! -f "$key_file" ]] && \
+        show_error_exit "Key file $key_file doesn't exists."
+    echo "Copy key from $key_file to $client_key_file"
+    key_file=$(cygpath -u $key_file)
+    cp $key_file $client_key_file
+fi
+
+if [[ ! -f $client_configure_file ]] ; then
+    [[ -f $template_configure_file ]] || \
+        (cd /etc/slapos; wget http://git.erp5.org/gitweb/slapos.core.git/blob_plain/HEAD:/slapos-client.cfg.example) || \
+        show_error_exit "Download slapos-client.cfg.example failed."
+    cp $template_configure_file $client_configure_file
+fi
+
+sed -i -e "s%^cert_file.*$%cert_file = $client_certificate_file%" \
+       -e "s%^key_file.*$%key_file = $client_key_file%" \
+       $client_configure_file
+
+# Config slapproxy
+if ! $(grep -q "^\[slapproxy\]" $node_config_file) ; then
+    echo "
+[slapproxy]
+host = 127.0.0.1
+port = 28080
+database_uri = /var/lib/slapproxy.db
+" >> $node_config_file
+fi
+
+#
+# Re6stnet
+#
+
+# Check ipv6, install it if it isn't installed.
+netsh interface ipv6 show interface > /dev/null || netsh interface ipv6 install
+
+# miniupnpc is required by re6stnet
+if [[ ! -d /opt/miniupnpc ]] ; then
+    if [[ -f /miniupnpc.tar.gz ]] ; then
+        echo "Installing miniupnpc ..."
+        cd /opt
+        tar xzf /miniupnpc.tar.gz --no-same-owner
+        mv $(ls -d miniupnpc-*) miniupnpc
+        cd miniupnpc
+        make
+        python setup.py install || echo "Install miniupnpc failed."
+    else
+        echo "No miniupnpc source package found."
+    fi
+fi
+
+# pyOpenSSL is required by re6stnet
+if [[ ! -d /opt/pyOpenSSL ]] ; then
+    if [[ -f /pyOpenSSL.tar.gz ]] ; then
+        echo "Installing pyOpenSSL ..."
+        cd /opt
+        tar xzf /pyOpenSSL.tar.gz --no-same-owner
+        mv $(ls -d pyOpenSSL-*) pyOpenSSL
+        cd pyOpenSSL
+        python setup.py install || echo "Install pyOpenSSL failed."
+    fi
+fi
+
+# Install re6stnet
+if [[ ! -d /opt/re6stnet ]] ; then
+    echo "Installing re6stnet ..."
+    cd /opt
+    if [[ -f /re6stnet.tar.gz ]] ; then
+        tar xzf /re6stnet.tar.gz --no-same-owner
+        mv $(ls -d re6stnet-*) re6stnet
+    else
+        echo "Clone re6stnet from http://git.erp5.org/repos/re6stnet.git"
+		git clone -b cygwin http://git.erp5.org/repos/re6stnet.git
+    fi
+    cd re6stnet
+    python setup.py install || echo "Install re6stnet failed."
+fi
+
+mkdir -p /etc/re6stnet
+cd /etc/re6stnet
+if [[ ! -f re6stnet.conf ]] ; then
+    re6st-conf --registry http://re6stnet.nexedi.com/
+fi
+[[ ! -f re6stnet.conf ]] && show_error_exit "Register to nexedi re6stnet failed"
+grep -q "^table " re6stnet.conf || echo "table 0" >> re6stnet.conf
+
+#
+# Create instance of web runner
+#
+slaprunner_cfg=http://git.erp5.org/gitweb/slapos.git/blob_plain/refs/heads/cygwin-0:/software/slaprunner/software.cfg
+while true ; do
+    /opt/slapos/bin/slapos supply  $slaprunner_cfg $computer_id
+    /opt/slapos/bin/slapos request "Node Runner" $slaprunner_cfg --node computer_guid=$computer_id && break
+done
+#
+# Get url from connection infromation
+# 
+# Connection parameters of instance are:
+#  {'backend_url': 'http://[2001:67c:1254:45::c5d5]:50000',
+#  'cloud9-url': 'http://localhost:9999',
+#  'password_recovery_code': 'e2d01c14',
+#  'ssh_command': 'ssh 2001:67c:1254:45::c5d5 -p 2222',
+#  'url': 'http://softinst39090.host.vifib.net/'}
+slaprunner_url=$(/opt/slapos/bin/slapos request "Node Runner" $slaprunner_cfg --node computer_guid=$computer_id | grep backend_url | sed -e "s/^.*': '//g" -e "s/',.*$//g")
+
+echo SlapOS Node configure successfully.
+read -n 1 -p "Press any key to exit..."
+exit 0

windows/scripts/slapos-node-runner.sh

+#! /bin/bash
+#
+export PATH=/usr/local/bin:/usr/bin:/bin:$PATH
+
+current_path=$(cygpath -a $(dirname $0))
+if [[ ! -f $current_path/node-runner.vbs ]] ; then
+    echo Installing slap-runner ...
+    $current_path/slapos-configure runner || (echo Failed to create instance of slap-runner ; exit 1)
+    echo Install slap-runner OK.
+fi
+
+# cat <<EOF > $current_path/node-runner.vbs
+#   Set oShell = CreateObject("WScript.Shell")
+#   oShell.OpenBrowser("http://[2001:67c:1254:45::c5d5]:50000")
+# EOF
+
+if [[ -f $current_path/node-runner.vbs ]] ; then
+    echo Starting slap-runner ...
+    cyg_cscript $current_path/node-runner.vbs || (echo Failed to start slap-runner ; exit 1)
+    echo Start slap-runner OK.
+fi

windows/scripts/slapos-node.sh

+#! /bin/bash
+export PATH=/usr/local/bin:/usr/bin:$PATH
+
+ifname=re6stnet-lo
+
+ping6 slap.vifib.com > /dev/null
+# Run re6stnet if no native ipv6
+if (( $? )) ; then
+    echo "Start re6stnet ..."
+    (cd /etc/re6stnet; re6stnet @re6stnet.conf --ovpnlog -I $ifname -i $ifname &)
+    echo "Start re6stent in the background OK."
+
+    echo "Waiting re6stent network work ..."
+    while true ; do
+        ping6 slap.vifib.com && break
+    done
+    echo "re6stnet network OK."
+fi
+
+# Format slapos node
+echo "Run Slapos format ..."
+/opt/slapos/bin/slapos node format -cv --now
+if (( $? )) ; then
+    echo "Failed to run slapos format."
+    exit 1
+else
+    echo "Format slapos node OK."
+fi
+
+# Release software
+echo "Releasing software ..."
+/opt/slapos/bin/slapos node software
+if (( $? )) ; then
+    echo "Failed to relase software in the slapos node."
+    exit 1
+else
+    echo "Release software OK." 
+fi
+
+# Instance software
+echo "Creating instance ..."
+/opt/slapos/bin/slapos node instance
+if (( $? )) ; then
+    echo "Failed to create instance in the slapos node."
+    exit 1
+else
+    echo "Create instance OK." 
+fi
+
+# Send report
+/opt/slapos/bin/slapos node report
+
+exit 0

windows/scripts/slapos.iss

@@ -53,6 +53,7 @@ Source: "opt\openvpn\bin\devcon.exe"; DestDir: "{app}\cygwin\usr\local\bin";
 Source: "opt\openvpn\driver\*"; DestDir: "{app}\cygwin\etc\slapos\driver";
 
 Source: "opt\git\slapos.package\windows\scripts\init-slapos-node.sh"; DestDir: "{app}\cygwin\etc\slapos\scripts";
+Source: "opt\git\slapos.package\windows\scripts\slapos-node.sh"; DestDir: "{app}\cygwin\etc\slapos\scripts";
 Source: "opt\git\slapos.package\windows\scripts\post-install.sh"; DestDir: "{app}\cygwin\etc\slapos\scripts";
 Source: "opt\git\slapos.package\windows\scripts\build-slapos.sh"; DestDir: "{app}\cygwin\etc\slapos\scripts";
 Source: "opt\git\slapos.package\windows\scripts\slapos-configure.sh"; DestDir: "{app}\cygwin\etc\slapos\scripts";
@@ -65,11 +66,10 @@ Source: "opt\git\slapos.package\windows\docs\README.cygwin"; DestDir: "{app}"; D
 [Icons]
 Name: "{commondesktop}\SlapOS Desktop"; Filename: "https://www.slapos.org/"; IconFilename: "{app}\cygwin\etc\slapos\images\slapos.ico";
 Name: "{group}\SlapOS Desktop"; Filename: "https://www.slapos.org/"; IconFilename: "{app}\cygwin\etc\slapos\images\slapos.ico";
-Name: "{group}\Node Runner"; Filename: "{app}\cygwin\bin\mintty.exe"; Parameters: "-w hide -l /var/log/slapos-node-runner.log /etc/slapos/scripts/slapos-node-runner.sh"; WorkingDir: "{app}\cygwin\bin"; IconFilename: "{app}\cygwin\etc\slapos\images\manager.ico";
-; Name: "{group}\SlapOS Console"; Filename: "{app}\cygwin\bin\mintty.exe"; Parameters: "-c ~/.minttyrc -h always -t ""SlapOS Console"" /opt/slapos/bin/slapconsole /etc/opt/slapos/slapos.cfg"; WorkingDir: "{app}\cygwin\bin"; IconFilename: "{app}\cygwin\etc\slapos\images\terminal.ico";
+Name: "{group}\Node Runner"; Filename: "{app}\cygwin\bin\mintty.exe"; Parameters: "-w hide -h never -l /var/log/slapos-node-runner.log /etc/slapos/scripts/slapos-node-runner.sh"; WorkingDir: "{app}\cygwin\bin"; IconFilename: "{app}\cygwin\etc\slapos\images\manager.ico";
+Name: "{group}\SlapOS Node"; Filename: "{app}\cygwin\bin\bash.exe"; Parameters: "--login -i /etc/slapos/scripts/slapos-node.sh"; WorkingDir: "{app}\cygwin\bin"; IconFilename: "{app}\cygwin\etc\slapos\images\node.ico";
 Name: "{group}\Command Console"; Filename: "{app}\cygwin\cygtty.bat";  WorkingDir: "{app}\cygwin\opt\slapos"; IconFilename: "{app}\cygwin\etc\slapos\images\terminal.ico";
-Name: "{group}\Configure SlapOS"; Filename: "{app}\cygwin\bin\mintty.exe"; Parameters: "-c ~/.minttyrc -t ""Configure SlapOS Client"" /etc/slapos/scripts/slapos-client-config.sh"; WorkingDir: "{app}\cygwin\bin"; IconFilename: "{app}\cygwin\etc\slapos\images\configure.ico";
-; Name: "{group}\Configure Node"; Filename: "{app}\cygwin\bin\mintty.exe"; Parameters: "-c ~/.minttyrc -t ""Configure SlapOS Node"" /etc/slapos/scripts/slapos-node-config.sh"; WorkingDir: "{app}\cygwin\bin"; IconFilename: "{app}\cygwin\etc\slapos\images\node.ico";
+Name: "{group}\Configure SlapOS"; Filename: "{app}\cygwin\bin\mintty.exe"; Parameters: "-c ~/.minttyrc -h never -t ""Configure SlapOS Client"" /etc/slapos/scripts/slapos-client-config.sh"; WorkingDir: "{app}\cygwin\bin"; IconFilename: "{app}\cygwin\etc\slapos\images\configure.ico";
 Name: "{group}\User Guide"; Filename: "{app}\user-guide.html";
 Name: "{group}\Uninstall SlapOS"; Filename: "{uninstallexe}";