Skip to content

slapos
slapos
Commit 694f3319 authored by Kazuhiko Shiozaki's avatar Kazuhiko Shiozaki
Browse files
Options

Merge remote-tracking branch 'origin/master' into erp5-component

parents 2ad8cb70 2c303cf2
Hide whitespace changes
Inline Side-by-side
Showing with 1165 additions and 158 deletions
component/hwloc/buildout.cfg 0 → 100644
View file @ 694f3319
[buildout]
extends =
../../component/libtool/buildout.cfg
../../component/automake/buildout.cfg
../../component/autoconf/buildout.cfg
parts =
hwloc
[hwloc]
recipe = slapos.recipe.cmmi
url = http://www.open-mpi.org/software/hwloc/v1.9/downloads/hwloc-1.9.tar.gz
md5sum = 1f9f9155682fe8946a97c08896109508
environment =
PATH=${pkgconfig:location}/bin:${automake:location}/bin:${autoconf:location}/bin:${libtool:location}/bin:%(PATH)s
configure-options =
--prefix="${buildout:parts-directory}/${:_buildout_section_name_}"
\ No newline at end of file
component/lua/buildout.cfg 0 → 100644
View file @ 694f3319
[buildout]
extends =
../readline/buildout.cfg
parts =
lua
[lua]
recipe = slapos.recipe.cmmi
url = http://www.lua.org/ftp/lua-5.2.3.tar.gz
md5sum = dc7f94ec6ff15c985d2d6ad0f1b35654
configure-command = make posix
make-targets =
install INSTALL_TOP=${buildout:parts-directory}/${:_buildout_section_name_}
environment =
CMAKE_INCLUDE_PATH=${readline:location}/include
CMAKE_LIBRARY_PATH=${readline:location}/lib
CPPFLAGS =-I${readline:location}/include
LDFLAGS =-L${readline:location}/lib -Wl,-rpath=${readline:location}/lib
component/trafficserver/buildout.cfg 0 → 100644
View file @ 694f3319
[buildout]
extends =
../../component/lua/buildout.cfg
../../component/hwloc/buildout.cfg
../../component/pkgconfig/buildout.cfg
../../component/libtool/buildout.cfg
../../component/make/buildout.cfg
../../component/openssl/buildout.cfg
../../component/tcl/buildout.cfg
../../component/libexpat/buildout.cfg
../../component/pcre/buildout.cfg
../../component/libcap/buildout.cfg
../../component/flex/buildout.cfg
../../component/ncurses/buildout.cfg
../../component/curl/buildout.cfg
../../component/zlib/buildout.cfg
parts =
trafficserver
[trafficserver]
recipe = slapos.recipe.cmmi
url = http://apache.claz.org/trafficserver/trafficserver-4.2.1.tar.bz2
md5sum = 18f7d56650cba260c8cce3bf4abfa56c
configure-options =
--prefix=${buildout:parts-directory}/${:_buildout_section_name_}
--with-openssl=${openssl:location}
--with-expat=${libexpat:location}
--with-pcre=${pcre:location}
--with-lua=${lua:location}
--with-ncurses=${ncurses:location}
--with-tcl=${tcl:location}/lib/
--with-zlib=${zlib:location}
environment =
PATH=${make:location}/bin:${libtool:location}/bin:${pkgconfig:location}/bin:%(PATH)s
LDFLAGS = -L${tcl:location}/lib -Wl,-rpath=${tcl:location}/lib
make-target =
check
install
software/apache-frontend/common.cfg
View file @ 694f3319
...@@ -13,7 +13,8 @@ extends = ...@@ -13,7 +13,8 @@ extends =
../../component/dcron/buildout.cfg ../../component/dcron/buildout.cfg
../../component/logrotate/buildout.cfg ../../component/logrotate/buildout.cfg
../../component/rdiff-backup/buildout.cfg ../../component/rdiff-backup/buildout.cfg
../../component/squid/buildout.cfg ../../component/trafficserver/buildout.cfg
# Monitoring stack # Monitoring stack
../../stack/monitor/buildout.cfg ../../stack/monitor/buildout.cfg
...@@ -33,7 +34,6 @@ parts += ...@@ -33,7 +34,6 @@ parts +=
dcron dcron
logrotate logrotate
rdiff-backup rdiff-backup
squid
[slapos-toolbox] [slapos-toolbox]
recipe = zc.recipe.egg recipe = zc.recipe.egg
...@@ -67,7 +67,7 @@ mode = 0644 ...@@ -67,7 +67,7 @@ mode = 0644
[template-apache-frontend] [template-apache-frontend]
recipe = slapos.recipe.template recipe = slapos.recipe.template
url = ${:_profile_base_location_}/instance-apache-frontend.cfg url = ${:_profile_base_location_}/instance-apache-frontend.cfg
md5sum = f5ec3d3b29d20ccdb00e3b64aa588fa5 md5sum = b823cb31ff97700c009cf14725690323
output = ${buildout:directory}/template-apache-frontend.cfg output = ${buildout:directory}/template-apache-frontend.cfg
mode = 0644 mode = 0644
...@@ -144,12 +144,6 @@ url = ${:_profile_base_location_}/templates/template-log-access.conf.in ...@@ -144,12 +144,6 @@ url = ${:_profile_base_location_}/templates/template-log-access.conf.in
md5sum = f85005b430978f3bd24ee7ce11b0e304 md5sum = f85005b430978f3bd24ee7ce11b0e304
mode = 640 mode = 640
[template-squid-configuration]
recipe = slapos.recipe.build:download
url = ${:_profile_base_location_}/templates/squid.conf.jinja2
md5sum = f17753fa87da074bc949b2967a330099
mode = 640
[template-empty] [template-empty]
recipe = slapos.recipe.build:download recipe = slapos.recipe.build:download
url = ${:_profile_base_location_}/templates/empty.in url = ${:_profile_base_location_}/templates/empty.in
...@@ -162,3 +156,12 @@ url = ${:_profile_base_location_}/templates/wrapper.in ...@@ -162,3 +156,12 @@ url = ${:_profile_base_location_}/templates/wrapper.in
output = ${buildout:directory}/template-wrapper.cfg output = ${buildout:directory}/template-wrapper.cfg
mode = 0644 mode = 0644
md5sum = 8cde04bfd0c0e9bd56744b988275cfd8 md5sum = 8cde04bfd0c0e9bd56744b988275cfd8
[template-trafficserver-records-config]
recipe = hexagonit.recipe.download
url = ${:_profile_base_location_}/templates/trafficserver/${:filename}
md5sum = 950a19be225a25309a3bda3f61fb5f6a
location = ${buildout:parts-directory}/${:_buildout_section_name_}
filename = records.config.jinja2
download-only = true
mode = 0644
software/apache-frontend/instance-apache-frontend.cfg
View file @ 694f3319
...@@ -9,16 +9,11 @@ parts = ...@@ -9,16 +9,11 @@ parts =
certificate-authority certificate-authority
logrotate-entry-apache logrotate-entry-apache
logrotate-entry-apache-cached logrotate-entry-apache-cached
logrotate-entry-squid
apache-frontend apache-frontend
apache-cached apache-cached
switch-apache-softwaretype switch-apache-softwaretype
frontend-apache-graceful frontend-apache-graceful
cached-apache-graceful cached-apache-graceful
squid-service
squid-prepare
squid-reload
promise-squid
dynamic-template-default-vh dynamic-template-default-vh
not-found-html not-found-html
promise-frontend-apache-configuration promise-frontend-apache-configuration
...@@ -28,6 +23,14 @@ parts = ...@@ -28,6 +23,14 @@ parts =
promise-apache-frontend-v6-https promise-apache-frontend-v6-https
promise-apache-frontend-v6-http promise-apache-frontend-v6-http
promise-apache-cached promise-apache-cached
trafficserver-launcher
trafficserver-reload
trafficserver-configuration-directory
trafficserver-records-config
trafficserver-remap-config
trafficserver-storage-config
## Monitoring part ## Monitoring part
###Parts to add for monitoring ###Parts to add for monitoring
certificate-authority certificate-authority
...@@ -47,6 +50,9 @@ parts = ...@@ -47,6 +50,9 @@ parts =
## Monitor for apache ## Monitor for apache
monitor-current-log-access monitor-current-log-access
monitor-backup-log-access monitor-backup-log-access
monitor-ats-cache-stats-wrapper
monitor-apache-configuration-verification
extends = ${monitor-template:output} extends = ${monitor-template:output}
...@@ -79,6 +85,7 @@ crontabs = $${:etc}/crontabs ...@@ -79,6 +85,7 @@ crontabs = $${:etc}/crontabs
cronstamps = $${:etc}/cronstamps cronstamps = $${:etc}/cronstamps
ca-dir = $${:srv}/ssl ca-dir = $${:srv}/ssl
[switch-apache-softwaretype] [switch-apache-softwaretype]
recipe = slapos.cookbook:softwaretype recipe = slapos.cookbook:softwaretype
single-default = $${dynamic-default-template-slave-list:rendered} single-default = $${dynamic-default-template-slave-list:rendered}
...@@ -117,14 +124,6 @@ apache-directory = ${apache-2.2:location} ...@@ -117,14 +124,6 @@ apache-directory = ${apache-2.2:location}
apache-ipv6 = $${instance-parameter:ipv6-random} apache-ipv6 = $${instance-parameter:ipv6-random}
apache-https-port = $${instance-parameter:configuration.port} apache-https-port = $${instance-parameter:configuration.port}
[monitor-current-log-access]
< = monitor-directory-access
source = $${directory:log}
[monitor-backup-log-access]
< = monitor-directory-access
source = $${directory:logrotate-backup}
[jinja2-template-base] [jinja2-template-base]
recipe = slapos.recipe.template:jinja2 recipe = slapos.recipe.template:jinja2
rendered = $${buildout:directory}/$${:filename} rendered = $${buildout:directory}/$${:filename}
...@@ -135,6 +134,7 @@ context = ...@@ -135,6 +134,7 @@ context =
key develop_eggs_directory buildout:develop-eggs-directory key develop_eggs_directory buildout:develop-eggs-directory
key slap_software_type instance-parameter:slap-software-type key slap_software_type instance-parameter:slap-software-type
key slapparameter_dict instance-parameter:configuration key slapparameter_dict instance-parameter:configuration
section directory directory
$${:extra-context} $${:extra-context}
[dynamic-template-default-vh] [dynamic-template-default-vh]
...@@ -333,8 +333,8 @@ cache-access-log = $${directory:log}/frontend-apache-access-cached.log ...@@ -333,8 +333,8 @@ cache-access-log = $${directory:log}/frontend-apache-access-cached.log
cache-error-log = $${directory:log}/frontend-apache-error-cached.log cache-error-log = $${directory:log}/frontend-apache-error-cached.log
cache-pid-file = $${directory:run}/httpd-cached.pid cache-pid-file = $${directory:run}/httpd-cached.pid
# Comunication with squid # Comunication with ats
cache-port = 26010 cache-port = $${trafficserver-variable:input-port}
cache-through-port = 26011 cache-through-port = 26011
# Create wrapper for "apachectl conftest" in bin # Create wrapper for "apachectl conftest" in bin
...@@ -433,77 +433,70 @@ sharedscripts = true ...@@ -433,77 +433,70 @@ sharedscripts = true
notifempty = true notifempty = true
create = true create = true
[logrotate-entry-squid] #################
<= logrotate # Trafficserver
recipe = slapos.cookbook:logrotate.d #################
name = squid [trafficserver-directory]
log = $${squid-cache:cache-log-path} $${squid-cache:access-log-path}
frequency = daily
rotatep-num = 30
post = ${buildout:bin-directory}/killpidfromfile $${apache-configuration:pid-file} SIGHUP
sharedscripts = true
notifempty = true
create = true
######################
# Squid deployment
######################
[squid-directory]
recipe = slapos.cookbook:mkdirectory recipe = slapos.cookbook:mkdirectory
squid-cache = $${directory:srv}/squid_cache configuration = $${directory:etc}/trafficserver
local-state = $${directory:var}/trafficserver
[squid-cache] bin_path = ${trafficserver:location}/bin
prepare-path = $${directory:etc-run}/squid-prepare log = $${directory:log}/trafficserver
wrapper-path = $${directory:service}/squid cache-path = $${directory:srv}/ats_cache
binary-path = ${squid:location}/sbin/squid
configuration-path = $${directory:etc}/squid.cfg [trafficserver-variable]
cache-path = $${squid-directory:squid-cache} wrapper-path = $${directory:service}/trafficserver
ip = $${instance-parameter:ipv4-random} reload-path = $${directory:etc-run}/trafficserver-reload
port = $${apache-configuration:cache-port} local-ip = $${instance-parameter:ipv4-random}
backend-ip = $${instance-parameter:ipv4-random} input-port = 23432
backend-port = $${apache-configuration:cache-through-port} hostname = $${slap-parameter:frontend-name}
open-port = $${instance-parameter:configuration.open-port} remap = map / http://$${instance-parameter:ipv4-random}:$${apache-configuration:cache-through-port}
access-log-path = $${directory:log}/squid-access.log disk-cache-config = $${trafficserver-directory:cache-path} 8G volume=$${slap-parameter:frontend-name}
cache-log-path = $${directory:log}/squid-cache.log
pid-filename-path = $${directory:run}/squid.pid [trafficserver-configuration-directory]
recipe = plone.recipe.command
[squid-configuration] command = cp -rn ${trafficserver:location}/etc/trafficserver/* $${:target}
< = jinja2-template-base target = $${trafficserver-directory:configuration}
template = ${template-squid-configuration:target}
rendered = $${squid-cache:configuration-path} [trafficserver-launcher]
extra-context =
key ip squid-cache:ip
key port squid-cache:port
key backend_ip squid-cache:backend-ip
key backend_port squid-cache:backend-port
key cache_path squid-cache:cache-path
key access_log_path squid-cache:access-log-path
key cache_log_path squid-cache:cache-log-path
key pid_filename_path squid-cache:pid-filename-path
key open_port squid-cache:open-port
[squid-service]
recipe = slapos.cookbook:wrapper recipe = slapos.cookbook:wrapper
command-line = $${squid-cache:binary-path} -N -f $${squid-configuration:rendered} command-line = ${trafficserver:location}/bin/traffic_cop
wrapper-path = $${squid-cache:wrapper-path} wrapper-path = $${trafficserver-variable:wrapper-path}
environment = TS_ROOT=$${buildout:directory}
[squid-prepare] [trafficserver-reload]
recipe = slapos.cookbook:wrapper recipe = slapos.cookbook:wrapper
command-line = $${squid-cache:binary-path} -z -f $${squid-configuration:rendered} command-line = ${trafficserver:location}/bin/traffic_line -x
wrapper-path = $${squid-cache:prepare-path} wrapper-path = $${trafficserver-variable:reload-path}
environment = TS_ROOT=$${buildout:directory}
[squid-reload] [trafficserver-records-config]
recipe = slapos.cookbook:wrapper < = jinja2-template-base
command-line = ${buildout:bin-directory}/killpidfromfile $${squid-cache:pid-filename-path} SIGHUP template = ${template-trafficserver-records-config:location}/${template-trafficserver-records-config:filename}
wrapper-path = $${directory:etc-run}/squid-reload rendered = $${trafficserver-directory:configuration}/records.config
mode = 700
context =
import os_module os
section ats_directory trafficserver-directory
section ats_configuration trafficserver-variable
[promise-squid] [trafficserver-remap-config]
recipe = slapos.cookbook:check_port_listening < = jinja2-template-base
path = $${directory:promise}/squid template = ${template-empty:target}
hostname = $${instance-parameter:ipv4-random} rendered = $${trafficserver-configuration-directory:target}/remap.config
port = $${apache-configuration:cache-port} mode = 700
context =
key content trafficserver-variable:remap
# End of Squid part [trafficserver-storage-config]
< = jinja2-template-base
template = ${template-empty:target}
rendered = $${trafficserver-configuration-directory:target}/storage.config
mode = 700
context =
key content trafficserver-variable:disk-cache-config
### End of ATS sections
### Apaches Graceful and promises ### Apaches Graceful and promises
[frontend-apache-graceful] [frontend-apache-graceful]
...@@ -577,3 +570,62 @@ server_url = $${slap-connection:server-url} ...@@ -577,3 +570,62 @@ server_url = $${slap-connection:server-url}
software_release_url = $${slap-connection:software-release-url} software_release_url = $${slap-connection:software-release-url}
key_file = $${slap-connection:key-file} key_file = $${slap-connection:key-file}
cert_file = $${slap-connection:cert-file} cert_file = $${slap-connection:cert-file}
[slap-parameter]
# Define default parameter(s) that will be used later, in case user didn't
# specify it
# All parameters are available through the configuration.XX syntax.
# All possible parameters should have a default.
domain = example.org
public-ipv4 =
port = 4443
plain_http_port = 8080
server-admin = admin@example.com
apache_custom_https = ""
apache_custom_http = ""
apache-key =
apache-certificate =
open-port = 80 443
extra_slave_instance_list =
frontend-name =
#######
# Monitoring sections
#
[monitor-current-log-access]
< = monitor-directory-access
source = $${directory:log}
[monitor-backup-log-access]
< = monitor-directory-access
source = $${directory:logrotate-backup}
# Produce ATS Cache stats
[monitor-ats-cache-stats-wrapper]
< = jinja2-template-base
template = ${template-wrapper:output}
rendered = $${monitor-directory:monitoring-cgi}/ats-cache-stats
mode = 0700
command = export TS_ROOT=$${buildout:directory} && echo "<pre>$(${trafficserver:location}/bin/traffic_shell $${monitor-ats-cache-stats-config:rendered})</pre>"
extra-context =
key content monitor-ats-cache-stats-wrapper:command
[monitor-ats-cache-stats-config]
< = jinja2-template-base
template = ${template-empty:target}
rendered = $${trafficserver-configuration-directory:target}/cache-config.stats
mode = 644
context =
raw content show:cache-stats
# Display result of apache configuration check
[monitor-apache-configuration-verification]
< = jinja2-template-base
template = ${template-wrapper:output}
rendered = $${monitor-directory:monitoring-cgi}/front-httpd-configuration
mode = 0700
command = echo "<pre>$($${apache-configuration:frontend-configuration-verification})</pre>"
extra-context =
key content :command
software/apache-frontend/templates/squid.conf.jinja2 deleted 100644 → 0
View file @ 2ad8cb70
refresh_pattern . 0 20% 4320 max-stale=604800
# Dissallow cachemgr access
http_access deny manager
# Squid service configuration
http_port {{ ip }}:{{ port }} accel defaultsite={{ ip }}
cache_peer {{ backend_ip }} parent {{ backend_port }} 0 no-query originserver name=backend
acl our_sites port {{ open_port }}
http_access allow our_sites
cache_peer_access backend allow our_sites
cache_peer_access backend deny all
# Drop squid headers
# via off
# reply_header_access X-Cache-Lookup deny all
# reply_header_access X-Squid-Error deny all
# reply_header_access X-Cache deny all
header_replace X-Forwarded-For
follow_x_forwarded_for allow all
forwarded_for on
cache_dir aufs {{ cache_path }} 5000 16 256
# Use 1Go of RAM
cache_mem 1024 MB
# But do not keep big object in RAM
maximum_object_size_in_memory 2048 KB
# Log
access_log {{ access_log_path }}
cache_log {{ cache_log_path }}
pid_filename {{ pid_filename_path }}
software/apache-frontend/templates/trafficserver/records.config.jinja2 0 → 100644
View file @ 694f3319
#
#
# Process Records Config File
#
# <RECORD-TYPE> <NAME> <TYPE> <VALUE (till end of line)>
#
# RECORD-TYPE: CONFIG, LOCAL
# NAME: name of variable
# TYPE: INT, STRING, FLOAT
# VALUE: Initial value for record
#
#
# *NOTE*: All options covered in this file should be documented in the
# administration guide or the addendum:
#
#
##############################################################################
#
# System Variables
#
##############################################################################
CONFIG proxy.config.proxy_name STRING {{ ats_configuration['hostname'] }}
CONFIG proxy.config.local_state_dir {{ ats_directory['local-state'] }}
CONFIG proxy.config.config_dir STRING {{ ats_directory['configuration'] }}
CONFIG proxy.config.bin_path STRING {{ ats_directory['bin_path'] }}
CONFIG proxy.config.proxy_binary_opts STRING -M
CONFIG proxy.config.env_prep STRING example_prep.sh
CONFIG proxy.config.alarm_email STRING nobody
CONFIG proxy.config.syslog_facility STRING LOG_DAEMON
CONFIG proxy.config.output.logfile STRING traffic.out
CONFIG proxy.config.snapshot_dir STRING snapshots
CONFIG proxy.config.system.mmap_max INT 2097152
##############################################################################
#
# Main threads configuration (worker threads). Also see configurations for
# SSL threads, disk I/O threads and task threads in their respective areas.
#
##############################################################################
CONFIG proxy.config.exec_thread.autoconfig INT 1
CONFIG proxy.config.exec_thread.autoconfig.scale FLOAT 1.5
CONFIG proxy.config.exec_thread.limit INT 2
CONFIG proxy.config.accept_threads INT 1
##############################################################################
#
# Local Manager
#
##############################################################################
CONFIG proxy.config.admin.admin_user STRING admin
CONFIG proxy.config.admin.number_config_bak INT 3
CONFIG proxy.config.admin.user_id STRING {{ '#%s' % os_module.geteuid() }}
##############################################################################
#
# Process Manager
#
##############################################################################
CONFIG proxy.config.admin.autoconf_port INT 8083
CONFIG proxy.config.process_manager.mgmt_port INT 8084
##############################################################################
#
# In order to only bind a specific IP, use the following config, as in
# the example below. Note - this can contain two addresses, one for IPv4
# sockets and one for IPv6 sockets.
#
##############################################################################
LOCAL proxy.local.incoming_ip_to_bind STRING {{ ats_configuration['local-ip'] }}
#LOCAL proxy.local.outgoing_ip_to_bind STRING 10.0.143.32
#LOCAL proxy.local.incoming_ip_to_bind STRING 192.168.101.17 fc07:192:168:101::17
##############################################################################
#
# Alarm Configuration
#
##############################################################################
# execute alarm as "<abs_path>/<bin> "<MSG_STRING_FROM_PROXY>""
CONFIG proxy.config.alarm.bin STRING example_alarm_bin.sh
CONFIG proxy.config.alarm.abs_path STRING NULL
##############################################################################
#
# HTTP Engine
#
##############################################################################
##########
# basics #
##########
# The server ports are listed here. These are separated by spaces or commas.
# Each port is a colon separated list of values, which must include a
# port number. The order is irrelevant. Other options are
# ipv4 - Use IPv4 (default)
# ipv6 - Use IPv6
# tr-in - Transparent inbound.
# tr-out - Transparent outbound.
# tr-full - Fully transparent (inbound and outbound).
# tr-pass - Transparently Pass-through non-HTTP traffic (in conjuction with tr-in).
# ssl - SSL terminated port.
# blind - Blind tunnel port (CONNECT only)
# ip-in=[addr] - Bind inbound IP address (listen for client).
# ip-out=[addr] - Bind outbound IP address (connect to origin server).
# ip-resolve=[style] - Set the IP resolution style.
#
# Note - address types must agree with each other and the ipv4/ipv6
# option if specified. IPv6 addresses must be enclosed in brackets.
# ip-out can be repeated as long as each address is a different
# family. If ip-in is specified as an IPv6 address, the port is
# forced to IPv6. Transparent ports cannot be bound to an IP
# address on the transparent side.
#
# The '=' is optional for any option with a value.
#
# Example 1: Port 8080 IPv6 inbound transparent, and port 80 IPv4
# "8080:ipv6:tr-in 80"
#
# Example 2: Listen on standard http and https ports for IPv4 and IPv6,
# fully transparent on the http ports. Also provide an non-transparent
# port at address 192.168.1.56 on port 8080.
# "80:ipv4:tr-full tr-full:80:ipv6 443:ipv4:ssl 443:ssl:ipv6 ip-in=192.168.1.56:8080"
#
CONFIG proxy.config.http.server_ports STRING {{ ats_configuration['local-ip'] + ':' + ats_configuration['input-port'] }}
# Ports on the origin server to which a blind tunnel may connect.
CONFIG proxy.config.http.connect_ports STRING 443 563
# The via settings have four values
# 0 - Do not modify / set this via header
# 1 - Update the via, with normal verbosity
# 2 - Update the via, with higher verbosity
# 3 - Update the via, with highest verbosity
CONFIG proxy.config.http.insert_request_via_str INT 2
CONFIG proxy.config.http.insert_response_via_str INT 2
# Insert a Server: header, this has three values
# 0 - Don't add or modify the Server: header
# 1 - Add a Server: header
# 2 - Only add a Server: header if one doesn't exist already
CONFIG proxy.config.http.response_server_enabled INT 1
CONFIG proxy.config.http.insert_age_in_response INT 1
CONFIG proxy.config.http.enable_url_expandomatic INT 0
CONFIG proxy.config.http.no_dns_just_forward_to_parent INT 0
CONFIG proxy.config.http.uncacheable_requests_bypass_parent INT 1
CONFIG proxy.config.http.keep_alive_enabled_in INT 1
CONFIG proxy.config.http.keep_alive_enabled_out INT 1
CONFIG proxy.config.http.chunking_enabled INT 1
# send http11 requests:
# 0 - Never
# 1 - Always
# 2 - if the server has returned http1.1 before
# 3 - if the client request is 1.1 & the server has returned 1.1 before
# If use_client_addr is set to 1, options 2 and 3 cause the proxy to use
# the client HTTP version for upstream requests.
CONFIG proxy.config.http.send_http11_requests INT 1
# Share server connections
# 0 - Never
# 1 - Share, with a single global connection pool
# 2 - Share, with a connection pool per worker thread
CONFIG proxy.config.http.share_server_sessions INT 2
##########################
# HTTP referer filtering #
##########################
CONFIG proxy.config.http.referer_filter INT 0
CONFIG proxy.config.http.referer_format_redirect INT 0
CONFIG proxy.config.http.referer_default_redirect STRING http://www.example.com/
##############################
# parent proxy configuration #
##############################
CONFIG proxy.config.http.parent_proxy_routing_enable INT 0
CONFIG proxy.config.http.parent_proxy.retry_time INT 300
# Parent fail threshold is the number of request that must
# fail within the retry window for the parent to be marked
# down
CONFIG proxy.config.http.parent_proxy.fail_threshold INT 10
CONFIG proxy.config.http.parent_proxy.total_connect_attempts INT 4
CONFIG proxy.config.http.parent_proxy.per_parent_connect_attempts INT 2
CONFIG proxy.config.http.parent_proxy.connect_attempts_timeout INT 30
CONFIG proxy.config.http.forward.proxy_auth_to_parent INT 0
###################################
# HTTP connection timeouts (secs) #
###################################
# out: proxy -> origin server connection
# in : ua -> proxy connection
CONFIG proxy.config.http.keep_alive_no_activity_timeout_in INT 115
CONFIG proxy.config.http.keep_alive_no_activity_timeout_out INT 120
CONFIG proxy.config.http.transaction_no_activity_timeout_in INT 30
CONFIG proxy.config.http.transaction_no_activity_timeout_out INT 30
CONFIG proxy.config.http.transaction_active_timeout_in INT 900
CONFIG proxy.config.http.transaction_active_timeout_out INT 0
CONFIG proxy.config.http.accept_no_activity_timeout INT 120
CONFIG proxy.config.http.background_fill_active_timeout INT 60
CONFIG proxy.config.http.background_fill_completed_threshold FLOAT 0.5
##################################
# origin server connect attempts #
##################################
CONFIG proxy.config.http.connect_attempts_max_retries INT 6
CONFIG proxy.config.http.connect_attempts_max_retries_dead_server INT 3
CONFIG proxy.config.http.connect_attempts_rr_retries INT 3
CONFIG proxy.config.http.connect_attempts_timeout INT 30
CONFIG proxy.config.http.post_connect_attempts_timeout INT 1800
CONFIG proxy.config.http.down_server.cache_time INT 300
CONFIG proxy.config.http.down_server.abort_threshold INT 10
##################################
# congestion control #
##################################
CONFIG proxy.config.http.congestion_control.enabled INT 0
#############################
# negative response caching #
#############################
CONFIG proxy.config.http.negative_caching_enabled INT 0
CONFIG proxy.config.http.negative_caching_lifetime INT 1800
#########################
# proxy users variables #
#########################
CONFIG proxy.config.http.anonymize_remove_from INT 0
CONFIG proxy.config.http.anonymize_remove_referer INT 0
CONFIG proxy.config.http.anonymize_remove_user_agent INT 0
CONFIG proxy.config.http.anonymize_remove_cookie INT 0
CONFIG proxy.config.http.anonymize_remove_client_ip INT 0
CONFIG proxy.config.http.anonymize_insert_client_ip INT 1
CONFIG proxy.config.http.anonymize_other_header_list STRING NULL
CONFIG proxy.config.http.insert_squid_x_forwarded_for INT 1
############
# security #
############
CONFIG proxy.config.http.push_method_enabled INT 0
# ###################################
# # HTTP Quick filtering (security) #
# ###################################
# this functionality is moved to ip_allow.config
#################
# cache control #
#################
CONFIG proxy.config.http.cache.http INT 1
# Enabling this setting allows the proxy to cache empty documents. This currently
# requires that the response has a Content-Length: header, with a value of "0".
CONFIG proxy.config.http.cache.allow_empty_doc INT 0
CONFIG proxy.config.http.cache.ignore_client_no_cache INT 1
CONFIG proxy.config.http.cache.ims_on_client_no_cache INT 1
CONFIG proxy.config.http.cache.ignore_server_no_cache INT 0
CONFIG proxy.config.http.cache.ignore_client_cc_max_age INT 0
CONFIG proxy.config.http.normalize_ae_gzip INT 0
# cache responses to cookies has 5 options:
# 0 - do not cache any responses to cookies
# 1 - cache for any content-type
# 2 - cache only for image types
# 3 - cache for all but text content-types
# 4 - cache for all but text content-types except OS response
# without "Set-Cookie" or with "Cache-Control: public"
# See also cache-responses-to-cookies in cache.config.
CONFIG proxy.config.http.cache.cache_responses_to_cookies INT 1
CONFIG proxy.config.http.cache.ignore_authentication INT 0
CONFIG proxy.config.http.cache.cache_urls_that_look_dynamic INT 1
CONFIG proxy.config.http.cache.enable_default_vary_headers INT 0
# when_to_revalidate has 5 options:
# 0 - default. use cache directives or heuristic
# 1 - stale if heuristic
# 2 - always stale (always revalidate)
# 3 - never stale
# 4 - always revalidate if request is conditional, else default is used
CONFIG proxy.config.http.cache.when_to_revalidate INT 0
# Some old MSIE browsers don't send no-cache headers to
# reverse proxies or transparent caches, this variable controls
# when to add no-cache headers to MSIE requests:
# -1 - no-cache is never added, stats are not updated
# 0 - default; no-cache not added to MSIE requests
# 1 - no-cache added to IMS MSIE requests
# 2 - no-cache added to all MSIE requests
CONFIG proxy.config.http.cache.when_to_add_no_cache_to_msie_requests INT -1
# required headers: three options:
# 0 - No required headers to make document cachable
# 1 - "Last-Modified:", "Expires:", or "Cache-Control: max-age" required
# 2 - explicit lifetime required, "Expires:" or "Cache-Control: max-age"
CONFIG proxy.config.http.cache.required_headers INT 2
CONFIG proxy.config.http.cache.max_stale_age INT 604800
CONFIG proxy.config.http.cache.range.lookup INT 1
########################
# heuristic expiration #
########################
CONFIG proxy.config.http.cache.heuristic_min_lifetime INT 3600
CONFIG proxy.config.http.cache.heuristic_max_lifetime INT 86400
CONFIG proxy.config.http.cache.heuristic_lm_factor FLOAT 0.10
CONFIG proxy.config.http.cache.fuzz.time INT 240
CONFIG proxy.config.http.cache.fuzz.probability FLOAT 0.005
#########################################
# dynamic content & content negotiation #
#########################################
CONFIG proxy.config.http.cache.vary_default_text STRING NULL
CONFIG proxy.config.http.cache.vary_default_images STRING NULL
CONFIG proxy.config.http.cache.vary_default_other STRING NULL
##############################################################
# The HTTP stats are expensive, turn off you don't need them #
##############################################################
CONFIG proxy.config.http.enable_http_stats INT 1
##############################################################################
#
# Customizable User Response Pages
#
##############################################################################
# 1 - enable customizable user response pages in only the "default" directory
# 2 - enable language-targeted user response pages
CONFIG proxy.config.body_factory.enable_customizations INT 1
CONFIG proxy.config.body_factory.enable_logging INT 0
# 0 - never suppress generated responses
# 1 - always suppress generated responses
# 2 - suppress responses for intercepted traffic
CONFIG proxy.config.body_factory.response_suppression_mode INT 0
##############################################################################
#
# Net Subsystem
#
##############################################################################
CONFIG proxy.config.net.connections_throttle INT 30000
# Enable defer accept / accept filtering. On Linux, this is a timeout, sec.
CONFIG proxy.config.net.defer_accept INT 45
##############################################################################
#
# Cluster Subsystem
#
##############################################################################
# cluster type requires restart to change
# 1 is full clustering, 2 is mgmt only, 3 is no clustering
LOCAL proxy.local.cluster.type INT 3
CONFIG proxy.config.cluster.cluster_port INT 8086
CONFIG proxy.config.cluster.rsport INT 8088
CONFIG proxy.config.cluster.mcport INT 8089
CONFIG proxy.config.cluster.mc_group_addr STRING 224.0.1.37
CONFIG proxy.config.cluster.mc_ttl INT 1
CONFIG proxy.config.cluster.log_bogus_mc_msgs INT 1
CONFIG proxy.config.cluster.ethernet_interface STRING lo
##############################################################################
#
# Cache
#
##############################################################################
CONFIG proxy.config.cache.permit.pinning INT 0
# default the ram cache size to AUTO_SIZE (-1) based on cache size
# (approximately 10 MB of RAM cache per GB of disk cache)
# alternatively, set to a fixed value such as 21474836480 (20GB)
CONFIG proxy.config.cache.ram_cache.size INT 1G
CONFIG proxy.config.cache.ram_cache_cutoff INT 4194304
# Replacement algorithm
# 0 : Clocked Least Frequently Used by Size (CLFUS) w/optional compression
# 1 : LRU w/o optional compression - trivially simple
CONFIG proxy.config.cache.ram_cache.algorithm INT 0
# Filter inserts into the RAM cache to ensure that they have been seen at
# least once. For LRU, this provides scan resistance. Note that CLFUS
# already requires that a document have history before it is inserted, so
# for CLFUS, setting this option means that a document must be seen three
# times before it is added to the RAM cache.
CONFIG proxy.config.cache.ram_cache.use_seen_filter INT 0
# Compress the content of the ram cache:
# 0 : no compression
# 1 : fastlz (extremely fast, relatively low compression)
# 2 : libz (moderate speed, reasonable compression)
# 3 : liblzma (very slow, high compression)
# NOTE: compression runs on task threads. To use more cores for
# compression, increase proxy.config.task_threads.
CONFIG proxy.config.cache.ram_cache.compress INT 0
# The maximum number of alternates that are allowed for any given URL.
# It is not possible to strictly enforce this if the variable
# 'proxy.config.cache.vary_on_user_agent' is set to 1.
# The default value for 'proxy.config.cache.vary_on_user_agent' is 0.
# (0 disables the maximum number of alts check)
CONFIG proxy.config.cache.limits.http.max_alts INT 5
# The target size of a contiguous fragment on disk.
# Acceptable values are powers of 2, e.g. 65536, 131072, 262144, 524288, 1048576, 2097152.
# Larger could waste memory on slow connections, smaller could waste seeks.
CONFIG proxy.config.cache.target_fragment_size INT 1048576
# The maximum size of a document that will be stored in the cache.
# (0 disables the maximum document size check)
CONFIG proxy.config.cache.max_doc_size INT 0
# enable the cache to read from an object while it is being added to the cache
CONFIG proxy.config.cache.enable_read_while_writer INT 0
# This controls how many objects (average) the disk caches can hold, and
# how much memory it'll consume for the directory structure.
CONFIG proxy.config.cache.min_average_object_size INT 8000
# How many I/O threads to allocate per disk (spindle). Be aware that RAID
# disks would show up to TS as a single spindle.
CONFIG proxy.config.cache.threads_per_disk INT 8
# Time (in ms) to delay until retrying to acquire a cache lock. Setting
# this low can reduce latencies in some cases, but can consume more CPU.
# If you experience CPU spinning, try increasing this setting.
CONFIG proxy.config.cache.mutex_retry_delay INT 2
# The interim storage disks. Must use raw disks.
# Only support at most 8 interim disks now. e.g.
# proxy.config.cache.interim.storage STRING /dev/sda /dev/sdb/
LOCAL proxy.config.cache.interim.storage STRING NULL
##############################################################################
#
# DNS
#
##############################################################################
CONFIG proxy.config.dns.search_default_domains INT 0
CONFIG proxy.config.dns.splitDNS.enabled INT 0
CONFIG proxy.config.dns.max_dns_in_flight INT 2048
# Additional URL expansions for http DNS lookup
CONFIG proxy.config.dns.url_expansions STRING NULL
CONFIG proxy.config.dns.round_robin_nameservers INT 0
CONFIG proxy.config.dns.nameservers STRING NULL
CONFIG proxy.config.dns.resolv_conf STRING /etc/resolv.conf
# This provides additional resilience against DNS forgery, particularly in
# forward or transparent proxies, but requires that the resolver populates
# the queries section of the response properly.
CONFIG proxy.config.dns.validate_query_name INT 0
##############################################################################
#
# HostDB
#
##############################################################################
# in entries, may not be changed while running
# note that in order to increase hostdb.size, hostdb.storage_size should
# also be increase. These are best guesses, you will have to monitor this.
CONFIG proxy.config.hostdb.size INT 120000
CONFIG proxy.config.hostdb.storage_size INT 32M
# ttl modes:
# 0 = obey
# 1 = ignore
# 2 = min(X,ttl)
# 3 = max(X,ttl)
CONFIG proxy.config.hostdb.ttl_mode INT 0
# in minutes...
CONFIG proxy.config.hostdb.timeout INT 1440
# round-robin addresses for single clients
# (can cause authentication problems)
CONFIG proxy.config.hostdb.strict_round_robin INT 0
##############################################################################
#
# Logging Config
#
##############################################################################
# possible values for logging_enabled:
# 0: no logging at all
# 1: log errors only
# 2: log transactions only
# 3: full logging (errors + transactions)
CONFIG proxy.config.log.logging_enabled INT 3
CONFIG proxy.config.log.max_secs_per_buffer INT 5
CONFIG proxy.config.log.max_space_mb_for_logs INT 25000
CONFIG proxy.config.log.max_space_mb_for_orphan_logs INT 25
CONFIG proxy.config.log.max_space_mb_headroom INT 1000
CONFIG proxy.config.log.hostname STRING localhost
CONFIG proxy.config.log.logfile_dir STRING {{ ats_directory['log'] }}
CONFIG proxy.config.log.logfile_perm STRING rw-r--r--
CONFIG proxy.config.log.custom_logs_enabled INT 0
CONFIG proxy.config.log.squid_log_enabled INT 1
CONFIG proxy.config.log.squid_log_is_ascii INT 0
CONFIG proxy.config.log.squid_log_name STRING squid
CONFIG proxy.config.log.squid_log_header STRING NULL
CONFIG proxy.config.log.common_log_enabled INT 0
CONFIG proxy.config.log.common_log_is_ascii INT 1
CONFIG proxy.config.log.common_log_name STRING common
CONFIG proxy.config.log.common_log_header STRING NULL
CONFIG proxy.config.log.extended_log_enabled INT 0
CONFIG proxy.config.log.extended_log_is_ascii INT 0
CONFIG proxy.config.log.extended_log_name STRING extended
CONFIG proxy.config.log.extended_log_header STRING NULL
CONFIG proxy.config.log.extended2_log_enabled INT 0
CONFIG proxy.config.log.extended2_log_is_ascii INT 1
CONFIG proxy.config.log.extended2_log_name STRING extended2
CONFIG proxy.config.log.extended2_log_header STRING NULL
CONFIG proxy.config.log.separate_icp_logs INT 0
CONFIG proxy.config.log.separate_host_logs INT 0
# Log collation allows you to do "remote logging"
LOCAL proxy.local.log.collation_mode INT 0
CONFIG proxy.config.log.collation_host STRING NULL
CONFIG proxy.config.log.collation_port INT 8085
CONFIG proxy.config.log.collation_secret STRING foobar
CONFIG proxy.config.log.collation_host_tagged INT 0
CONFIG proxy.config.log.collation_retry_sec INT 5
CONFIG proxy.config.log.rolling_enabled INT 1
CONFIG proxy.config.log.rolling_interval_sec INT 86400
CONFIG proxy.config.log.rolling_offset_hr INT 0
CONFIG proxy.config.log.rolling_size_mb INT 10
CONFIG proxy.config.log.auto_delete_rolled_files INT 1
CONFIG proxy.config.log.sampling_frequency INT 1
##############################################################################
#
# Reverse Proxy
#
##############################################################################
CONFIG proxy.config.reverse_proxy.enabled INT 1
CONFIG proxy.config.header.parse.no_host_url_redirect STRING NULL
##############################################################################
#
# URL Remap Rules
#
##############################################################################
CONFIG proxy.config.url_remap.default_to_server_pac INT 0
CONFIG proxy.config.url_remap.default_to_server_pac_port INT -1
# To enable forward proxy, you must turn off remap_required
CONFIG proxy.config.url_remap.remap_required INT 1
# Pristine host header is the "original" (request) header. Make sure your
# origin expects them in reverse proxy.
CONFIG proxy.config.url_remap.pristine_host_hdr INT 1
##############################################################################
#
# SSL Termination
#
##############################################################################
# The number of SSL threads is a multiplier of number of CPUs and
# proxy.config.exec_thread.autoconfig.scale by default. You can
# override that here (set it to a non-zero value).
CONFIG proxy.config.ssl.number.threads INT 0
# The following three variables can be
# set to 0 to disable SSLv2, SSLv3, and/or TLSv1.
# SSLv2 is disabled by default for security concern.
CONFIG proxy.config.ssl.SSLv2 INT 0
CONFIG proxy.config.ssl.SSLv3 INT 1
CONFIG proxy.config.ssl.TLSv1 INT 1
# The following two variables control the Cipher Suite traffic Server
# uses for HTTPS connnections and whether to prefer the client
# selected (default) or the server selected
# Our default SSL Cipher Suite tries to be reasonably fast and strong.
CONFIG proxy.config.ssl.server.cipher_suite STRING RC4-SHA:AES128-SHA:DES-CBC3-SHA:AES256-SHA:ALL:!aNULL:!EXP:!LOW:!MD5:!SSLV2:!NULL
CONFIG proxy.config.ssl.server.honor_cipher_order INT 0
# Control if SSL should perform content compression or not
CONFIG proxy.config.ssl.compression INT 0
# Client certification level should be:
# 0 no client certificates
# 1 client certificates optional
# 2 client certificates required
CONFIG proxy.config.ssl.client.certification_level INT 0
# Server cert chain filename is the name of the global cert chain file
# that is added to every cert in ssl_multicert.config. This file is only
# loaded if there are configurations in ssl_multicert.config.
CONFIG proxy.config.ssl.server.cert_chain.filename STRING NULL
# This is the path that SSL certificates files are relative to. Certificate
# names specified in ssl_multicert.config will be located relative to this path.
CONFIG proxy.config.ssl.server.cert.path STRING etc/trafficserver
# If any private key is not contained in the certificate file, you must
# fill in the private key path. Private key names specified in
# ssl_multicert.config will be located relative to this path.
CONFIG proxy.config.ssl.server.private_key.path STRING etc/trafficserver
# The CA file name and path are the
# certificate authority certificate that
# client certificates will be verified against.
CONFIG proxy.config.ssl.CA.cert.filename STRING NULL
CONFIG proxy.config.ssl.CA.cert.path STRING etc/trafficserver
################################
# client related configuration #
################################
CONFIG proxy.config.ssl.client.verify.server INT 0
CONFIG proxy.config.ssl.client.cert.filename STRING NULL
CONFIG proxy.config.ssl.client.cert.path STRING etc/trafficserver
# Fill in private key file and path only if the client's
# private key is not contained in the client certificate file.
CONFIG proxy.config.ssl.client.private_key.filename STRING NULL
CONFIG proxy.config.ssl.client.private_key.path STRING etc/trafficserver
# The CA file name and path are the
# certificate authority certificate that
# server certificates will be verified against.
CONFIG proxy.config.ssl.client.CA.cert.filename STRING NULL
CONFIG proxy.config.ssl.client.CA.cert.path STRING etc/trafficserver
##############################################################################
#
# ICP Configuration. NOTE! ICP is currently broken NOTE!
#
##############################################################################
# icp modes
# enabled=0 ICP disabled
# enabled=1 Allow receive of ICP queries
# enabled=2 Allow send/receive of ICP queries
CONFIG proxy.config.icp.enabled INT 0
CONFIG proxy.config.icp.icp_interface STRING NULL
CONFIG proxy.config.icp.icp_port INT 3130
CONFIG proxy.config.icp.multicast_enabled INT 0
CONFIG proxy.config.icp.query_timeout INT 2
##############################################################################
#
# Scheduled Update Configuration
#
##############################################################################
CONFIG proxy.config.update.enabled INT 0
CONFIG proxy.config.update.force INT 0
CONFIG proxy.config.update.retry_count INT 10
CONFIG proxy.config.update.retry_interval INT 2
CONFIG proxy.config.update.concurrent_updates INT 100
##############################################################################
#
# Socket send/recv buffer sizes (0 == don't call setsockopt() )
#
##############################################################################
# out: proxy -> os connection
# in : ua -> proxy connection
CONFIG proxy.config.net.sock_send_buffer_size_in INT 262144
CONFIG proxy.config.net.sock_recv_buffer_size_in INT 0
CONFIG proxy.config.net.sock_send_buffer_size_out INT 0
CONFIG proxy.config.net.sock_recv_buffer_size_out INT 0
##############################################################################
#
# User Overridden Configurations Below
#
##############################################################################
CONFIG proxy.config.core_limit INT -1
##############################################################################
#
# Debugging
#
##############################################################################
# Uses a regular expression to match the debugging topic name, performance
# will be affected!
CONFIG proxy.config.diags.debug.enabled INT 0
CONFIG proxy.config.diags.debug.tags STRING http.*|dns.*
# Great for tracking down memory leaks, but you need to use the
# ink allocators
CONFIG proxy.config.dump_mem_info_frequency INT 0
# Log the source code location of diagnostic messages.
CONFIG proxy.config.diags.show_location INT 0
##############################################################################
#
# Configuration for Reclaimable InkFreeList memory pool
#
# NOTE: The following options are meaningfull only when Traffic Server is
# compiled with the following option to configure:
#
# --enable-reclaimable-freelist
#
##############################################################################
CONFIG proxy.config.allocator.enable_reclaim INT 1
# The value of reclaim_factor should be in the 0.0 to 1.0 range. Allocators
# use it to calculate size of unused memory, which is used to determine when
# to reclaim memory. The larger the value, the more aggressive reclaims.
CONFIG proxy.config.allocator.reclaim_factor FLOAT 0.300000
# Allocator will reclaim memory only when it continuously satisfy the reclaim
# condition for max_overage continuous checks.
CONFIG proxy.config.allocator.max_overage INT 3
# For debugging, enable debug_filter, which is a bit-map with these fields:
# bit 0: reclaim memory in ink_freelist_new
# bit 1: allocate memory from partial-free Chunks(if exist) or OS
CONFIG proxy.config.allocator.debug_filter INT 0
##############################################################################
#
# Slow Log
#
##############################################################################
# Log any request that takes more then x number of milliseconds, needs
# to be > 0 to be enabled
CONFIG proxy.config.http.slow.log.threshold INT 0
##############################################################################
#
# Thread pool for "misc" tasks, plugins etc. 2 is a good minimum.
#
##############################################################################
CONFIG proxy.config.task_threads INT 2
stack/monitor/buildout.cfg
View file @ 694f3319
...@@ -42,30 +42,30 @@ recipe = slapos.recipe.template ...@@ -42,30 +42,30 @@ recipe = slapos.recipe.template
url = ${:_profile_base_location_}/monitor.cfg.in url = ${:_profile_base_location_}/monitor.cfg.in
output = ${buildout:directory}/monitor.cfg output = ${buildout:directory}/monitor.cfg
filename = monitor.cfg filename = monitor.cfg
md5sum = bd592a0f0c41ec15c643c4e91e9ec5cc md5sum = 499ba647f0c22f16bea3cc88bdfd98e8
mode = 0644 mode = 0644
[monitor-bin] [monitor-bin]
recipe = hexagonit.recipe.download recipe = hexagonit.recipe.download
url = ${:_profile_base_location_}/${:filename} url = ${:_profile_base_location_}/${:filename}
download-only = true download-only = true
md5sum = 1e7b4698f6627150b1eb783b06f8b13a md5sum = cb2f15850d3dc82459a0044adb4416cf
destination = ${buildout:directory}/parts/monitor-template-monitor-bin destination = ${buildout:directory}/parts/monitor-template-monitor-bin
filename = monitor.py.in filename = monitor.py.in
mode = 0644 mode = 0644
[index] [index]
recipe = hexagonit.recipe.download recipe = hexagonit.recipe.download
url = ${:_profile_base_location_}/webfiles/${:filename} url = ${:_profile_base_location_}/webfile-directory/${:filename}
download-only = true download-only = true
md5sum = 91ac749f86aecc0c383d93e51e15a572 md5sum = cd649264b331499241abfcdb4e81672a
destination = ${buildout:directory}/parts/monitor-index destination = ${buildout:directory}/parts/monitor-index
filename = index.cgi.in filename = index.cgi.in
mode = 0644 mode = 0644
[index-template] [index-template]
recipe = hexagonit.recipe.download recipe = hexagonit.recipe.download
url = ${:_profile_base_location_}/webfiles/${:filename} url = ${:_profile_base_location_}/webfile-directory/${:filename}
download-only = true download-only = true
destination = ${buildout:directory}/parts/monitor-template-index destination = ${buildout:directory}/parts/monitor-template-index
md5sum = e0d2aaeffc046b2ac6d9d717e1ba321d md5sum = e0d2aaeffc046b2ac6d9d717e1ba321d
...@@ -74,22 +74,31 @@ mode = 0644 ...@@ -74,22 +74,31 @@ mode = 0644
[status-cgi] [status-cgi]
recipe = hexagonit.recipe.download recipe = hexagonit.recipe.download
url = ${:_profile_base_location_}/webfiles/${:filename} url = ${:_profile_base_location_}/webfile-directory/${:filename}
download-only = true download-only = true
md5sum = aa2764cab87e457410435974f729e906 md5sum = 4fb26753ee669b8ac90ffe33dbd12e8f
destination = ${buildout:directory}/parts/monitor-template-status-cgi destination = ${buildout:directory}/parts/monitor-template-status-cgi
filename = status.cgi.in filename = status.cgi.in
mode = 0644 mode = 0644
[settings-cgi] [settings-cgi]
recipe = hexagonit.recipe.download recipe = hexagonit.recipe.download
url = ${:_profile_base_location_}/webfiles/${:filename} url = ${:_profile_base_location_}/webfile-directory/${:filename}
download-only = true download-only = true
md5sum = 18574b804da0c65d8670959f9e7c4774 md5sum = f19c8e4b94718d475520618ae57338c8
destination = ${buildout:directory}/parts/monitor-template-settings-cgi destination = ${buildout:directory}/parts/monitor-template-settings-cgi
filename = settings.cgi.in filename = settings.cgi.in
mode = 0644 mode = 0644
[monitor-password-cgi]
recipe = hexagonit.recipe.download
url = ${:_profile_base_location_}/webfile-directory/${:filename}
download-only = true
md5sum = 1a6153908934bf77e3e033eeabdc1675
destination = ${buildout:directory}/parts/monitor-template-monitor-password-cgi
filename = monitor-password.cgi.in
mode = 0644
[rss-bin] [rss-bin]
recipe = hexagonit.recipe.download recipe = hexagonit.recipe.download
url = ${:_profile_base_location_}/${:filename} url = ${:_profile_base_location_}/${:filename}
...@@ -108,9 +117,9 @@ logfile = $${directory:log}/crond.log ...@@ -108,9 +117,9 @@ logfile = $${directory:log}/crond.log
[download-static-files] [download-static-files]
recipe = hexagonit.recipe.download recipe = hexagonit.recipe.download
url = https://github.com/SlapOS/staticForMonitoring/blob/db670e7568871c69a64916d462ccb57629f1c77d/static-files.tar.gz?raw=true url = https://github.com/SlapOS/staticForMonitoring/blob/8b7050faa2dd22592766e25b66b9efe0d0b216c9/static-files.tar.gz?raw=true
download-only = true download-only = true
md5sum = 9e3feb2b520620d5b8d478eb9a9be6de md5sum = 05030ff31dc75c2b96559dedc70945f5
filename = static-files.tar.gz filename = static-files.tar.gz
destination = ${buildout:directory}/parts/monitor-static-files destination = ${buildout:directory}/parts/monitor-static-files
mode = 0644 mode = 0644
stack/monitor/monitor.cfg.in
View file @ 694f3319
...@@ -18,6 +18,7 @@ url = https://[$${slap-parameters:ipv6-random}]:$${:port} ...@@ -18,6 +18,7 @@ url = https://[$${slap-parameters:ipv6-random}]:$${:port}
index-filename = index.cgi index-filename = index.cgi
index-path = $${monitor-directory:www}/$${:index-filename} index-path = $${monitor-directory:www}/$${:index-filename}
db-path = $${monitor-directory:etc}/monitor.db db-path = $${monitor-directory:etc}/monitor.db
monitor-password-path = $${monitor-directory:etc}/.monitor.shadow
[monitor-directory] [monitor-directory]
recipe = slapos.cookbook:mkdirectory recipe = slapos.cookbook:mkdirectory
...@@ -97,11 +98,14 @@ mode = 0644 ...@@ -97,11 +98,14 @@ mode = 0644
recipe = slapos.recipe.template:jinja2 recipe = slapos.recipe.template:jinja2
template = ${index:location}/${index:filename} template = ${index:location}/${index:filename}
rendered = $${monitor-parameters:index-path} rendered = $${monitor-parameters:index-path}
update-apache-access = ${apache:location}/bin/htpasswd -cb $${monitor-parameters:htaccess-file} admin
mode = 0744 mode = 0744
context = context =
key cgi_directory monitor-directory:cgi-bin key cgi_directory monitor-directory:cgi-bin
raw index_template $${deploy-index-template:location}/$${deploy-index-template:filename} raw index_template $${deploy-index-template:location}/$${deploy-index-template:filename}
key password zero-parameters:monitor-password key monitor_password_path monitor-parameters:monitor-password-path
key monitor_password_script_path deploy-monitor-password-cgi:rendered
key apache_update_command :update-apache-access
raw extra_eggs_interpreter ${buildout:directory}/bin/${extra-eggs:interpreter} raw extra_eggs_interpreter ${buildout:directory}/bin/${extra-eggs:interpreter}
raw default_page /welcome.html raw default_page /welcome.html
...@@ -139,6 +143,17 @@ context = ...@@ -139,6 +143,17 @@ context =
key pwd monitor-directory:knowledge0-cgi key pwd monitor-directory:knowledge0-cgi
key this_file :filename key this_file :filename
[deploy-monitor-password-cgi]
recipe = slapos.recipe.template:jinja2
template = ${monitor-password-cgi:location}/${monitor-password-cgi:filename}
rendered = $${monitor-directory:knowledge0-cgi}/$${:filename}
filename = monitor-password.cgi
mode = 0744
context =
raw python_executable ${buildout:executable}
key pwd monitor-directory:knowledge0-cgi
key this_file :filename
[deploy-monitor-script] [deploy-monitor-script]
recipe = slapos.recipe.template:jinja2 recipe = slapos.recipe.template:jinja2
template = ${monitor-bin:location}/${monitor-bin:filename} template = ${monitor-bin:location}/${monitor-bin:filename}
...@@ -159,12 +174,6 @@ context = ...@@ -159,12 +174,6 @@ context =
section directory monitor-directory section directory monitor-directory
section monitor_parameters monitor-parameters section monitor_parameters monitor-parameters
[monitor-htaccess]
recipe = plone.recipe.command
stop-on-error = true
htaccess-path = $${monitor-parameters:htaccess-file}
command = ${apache:location}/bin/htpasswd -cb $${:htaccess-path} admin $${zero-parameters:monitor-password}
[monitor-directory-access] [monitor-directory-access]
recipe = plone.recipe.command recipe = plone.recipe.command
command = ln -s $${:source} $${monitor-directory:private-directory} command = ln -s $${:source} $${monitor-directory:private-directory}
...@@ -211,7 +220,6 @@ name = example.com ...@@ -211,7 +220,6 @@ name = example.com
[public] [public]
recipe = slapos.cookbook:zero-knowledge.write recipe = slapos.cookbook:zero-knowledge.write
filename = knowledge0.cfg filename = knowledge0.cfg
monitor-password = passwordtochange
[zero-parameters] [zero-parameters]
recipe = slapos.cookbook:zero-knowledge.read recipe = slapos.cookbook:zero-knowledge.read
...@@ -279,7 +287,7 @@ input = inline: ...@@ -279,7 +287,7 @@ input = inline:
</Files> </Files>
AuthType Basic AuthType Basic
AuthName "Private access" AuthName "Private access"
AuthUserFile "$${monitor-htaccess:htaccess-path}" AuthUserFile "$${monitor-parameters:htaccess-file}"
Require valid-user Require valid-user
Options Indexes FollowSymLinks Options Indexes FollowSymLinks
Satisfy all Satisfy all
...@@ -315,4 +323,3 @@ curl_path = ${curl:location}/bin/curl ...@@ -315,4 +323,3 @@ curl_path = ${curl:location}/bin/curl
[publish-connection-informations] [publish-connection-informations]
recipe = slapos.cookbook:publish recipe = slapos.cookbook:publish
monitor_url = $${monitor-parameters:url} monitor_url = $${monitor-parameters:url}
IMPORTANT_monitor_info = Change the monitor_password as soon as possible ! Default is : $${public:monitor-password} . You can change it in the setting.cgi section of your monitorin interface
stack/monitor/monitor.py.in
View file @ 694f3319
...@@ -7,6 +7,7 @@ import subprocess ...@@ -7,6 +7,7 @@ import subprocess
import sys import sys
import sqlite3 import sqlite3
import time import time
import threading
from optparse import OptionParser, make_option from optparse import OptionParser, make_option
...@@ -34,6 +35,26 @@ option_list = [ ...@@ -34,6 +35,26 @@ option_list = [
help="add the file containing services\'pid to the files to monitor") help="add the file containing services\'pid to the files to monitor")
] ]
class Popen(subprocess.Popen):
__timeout = None
def timeout(self, delay, delay_before_kill=5):
if self.__timeout is not None: self.__timeout.cancel()
self.__timeout = threading.Timer(delay, self.stop, [delay_before_kill])
self.__timeout.start()
def waiter():
self.wait()
self.__timeout.cancel()
threading.Thread(target=waiter).start()
def stop(self, delay_before_kill=5):
if self.__timeout is not None: self.__timeout.cancel()
self.terminate()
t = threading.Timer(delay_before_kill, self.kill)
t.start()
r = self.wait()
t.cancel()
return r
def init_db(): def init_db():
db = sqlite3.connect(db_path) db = sqlite3.connect(db_path)
...@@ -89,24 +110,26 @@ def runServices(directory): ...@@ -89,24 +110,26 @@ def runServices(directory):
def runScripts(directory): def runScripts(directory):
scripts = getListOfScripts(directory) scripts = getListOfScripts(directory)
script_timeout = 3 # XXX script_timeout could be passed as parameters
script_timeout = 60 # in seconds
result = {} result = {}
for script in scripts: for script in scripts:
command = [os.path.join(promise_dir, script)] command = [os.path.join(promise_dir, script)]
script = os.path.basename(command[0]) script = os.path.basename(command[0])
result[script] = '' result[script] = ''
process_handler = subprocess.Popen(command, process_handler = Popen(command,
cwd=instance_path, cwd=instance_path,
env=None if sys.platform == 'cygwin' else {}, env=None if sys.platform == 'cygwin' else {},
stdout=subprocess.PIPE, stdout=subprocess.PIPE,
stderr=subprocess.PIPE, stderr=subprocess.PIPE,
stdin=subprocess.PIPE) stdin=subprocess.PIPE)
process_handler.stdin.flush() process_handler.stdin.flush()
process_handler.stdin.close() process_handler.stdin.close()
process_handler.stdin = None process_handler.stdin = None
time.sleep(script_timeout) process_handler.timeout(script_timeout)
process_handler.wait()
if process_handler.poll() is None: if process_handler.poll() is None:
process_handler.terminate() process_handler.terminate()
......
stack/monitor/webfiles/index.cgi.in → stack/monitor/webfile-directory/index.cgi.in
View file @ 694f3319
...@@ -3,11 +3,12 @@ ...@@ -3,11 +3,12 @@
import cgi import cgi
import cgitb import cgitb
import Cookie import Cookie
import base64
import hashlib
import hmac
import jinja2 import jinja2
import json
import os import os
import subprocess import subprocess
import sys
import urllib import urllib
cgitb.enable(display=0, logdir="/tmp/cgi.log") cgitb.enable(display=0, logdir="/tmp/cgi.log")
...@@ -17,6 +18,58 @@ cookie = Cookie.SimpleCookie() ...@@ -17,6 +18,58 @@ cookie = Cookie.SimpleCookie()
cgi_path = "{{ cgi_directory }}" cgi_path = "{{ cgi_directory }}"
monitor_password_path = "{{ monitor_password_path }}"
monitor_password_script_path = "{{ monitor_password_script_path }}"
monitor_apache_password_command = "{{ apache_update_command }}"
########
# Password functions
#######
def crypt(word, salt="$$"):
salt = salt.split("$")
algo = salt[0] or 'sha1'
if algo in hashlib.algorithms:
H = getattr(hashlib, algo)
elif algo == "plain":
return "%s$%s" % (algo, word)
else:
raise ValueError
rounds = min(max(0, int(salt[1])), 30) if salt[1] else 9
salt = salt[2] or base64.b64encode(os.urandom(12), "./")
h = hmac.new(salt, word, H).digest()
for x in xrange(1, 1 << rounds):
h = H(h).digest()
return "%s$%s$%s$%s" % (algo, rounds, salt,
base64.b64encode(h, "./").rstrip("="))
def is_password_set():
if not os.path.exists(monitor_password_path):
return False
hashed_password = open(monitor_password_path, 'r').read()
try:
void, algo, salt, hsh = hashed_password.split('$')
except ValueError:
return False
return True
def set_password(raw_password):
hashed_password = crypt(raw_password)
subprocess.check_call(monitor_apache_password_command + " %s" % raw_password,
shell=True)
open(monitor_password_path, 'w').write(hashed_password)
def check_password(raw_password):
"""
Returns a boolean of whether the raw_password was correct. Handles
encryption formats behind the scenes.
"""
if not os.path.exists(monitor_password_path) or not raw_password:
return False
hashed_password = open(monitor_password_path, 'r').read()
return hashed_password == crypt(raw_password, hashed_password)
### End of password functions
def forward_form(): def forward_form():
command = os.path.join(cgi_path, form['posting-script'].value) command = os.path.join(cgi_path, form['posting-script'].value)
...@@ -33,8 +86,10 @@ def forward_form(): ...@@ -33,8 +86,10 @@ def forward_form():
pass pass
def return_document(): def return_document(command=None):
command = os.path.join(cgi_path, form['script'].value) if not command:
script = form['script'].value
command = os.path.join(cgi_path, script)
#XXX this functions should be called only for display, #XXX this functions should be called only for display,
#so a priori it doesn't need form data #so a priori it doesn't need form data
os.environ['QUERY_STRING'] = '' os.environ['QUERY_STRING'] = ''
...@@ -45,8 +100,8 @@ def return_document(): ...@@ -45,8 +100,8 @@ def return_document():
print open(command).read() print open(command).read()
else: else:
raise OSError raise OSError
except (subprocess.CalledProcessError, OSError): except (subprocess.CalledProcessError, OSError) as e:
print "<p>File cannot be found</p>" print "<p>Error :</p><pre>%s</pre>" % e
def make_menu(): def make_menu():
...@@ -62,29 +117,48 @@ def make_menu(): ...@@ -62,29 +117,48 @@ def make_menu():
return folder_list return folder_list
# Beginning of response def get_cookie_password():
print "Content-Type: text/html"
# Check if user is logged
if "password" in form:
password = form['password'].value
if password == '{{ password }}' :
cookie['password'] = password
print cookie, "; Path=/; HttpOnly"
else:
cookie_string = os.environ.get('HTTP_COOKIE') cookie_string = os.environ.get('HTTP_COOKIE')
if cookie_string: if cookie_string:
cookie.load(cookie_string) cookie.load(cookie_string)
try: try:
password = cookie['password'].value return cookie['password'].value
except KeyError: except KeyError:
password = None pass
else: return None
password = None
def set_cookie_password(password):
cookie['password'] = password
print cookie, "; Path=/; HttpOnly"
# Beginning of response
print "Content-Type: text/html"
password = None
# Check if user is logged
if "password_2" in form and "password" in form:
password_2 = form['password_2'].value
password_1 = form['password'].value
password = get_cookie_password()
if not is_password_set() or check_password(password):
if password_2 == password_1:
password = password_1
set_password(password)
set_cookie_password(password)
elif "password" in form:
password = form['password'].value
if is_password_set() and check_password(password):
set_cookie_password(password)
else:
password = get_cookie_password()
print '\n' print '\n'
if not password or password != '{{ password }}':
if not is_password_set():
return_document(monitor_password_script_path)
elif not check_password(password):
print "<html><head>" print "<html><head>"
print """ print """
<link rel="stylesheet" href="pure-min.css"> <link rel="stylesheet" href="pure-min.css">
...@@ -101,7 +175,6 @@ if not password or password != '{{ password }}': ...@@ -101,7 +175,6 @@ if not password or password != '{{ password }}':
<button type="submit" class="pure-button pure-button-primary">Access</button> <button type="submit" class="pure-button pure-button-primary">Access</button>
</form> </form>
</body></html>""" </body></html>"""
# redirection to the required script/page # redirection to the required script/page
else: else:
print print
......
stack/monitor/webfile-directory/monitor-password.cgi.in 0 → 100644
View file @ 694f3319
#!{{ python_executable }}
import cgitb
cgitb.enable()
print "<html><head>"
print """
<script type="text/javascript" src="/jquery-1.10.2.min.js"></script>
<link rel="stylesheet" href="pure-min.css">
<link rel="stylesheet" href="/style.css">"""
print "</head><body>"
print "<h1>This is the monitoring interface</h1>"
print "<h2>Please set your password for later access</h2>"
print """
<form action="/index.cgi" method="post" class="pure-form-aligned">
<div class="pure-control-group">
<label for="password">Password*:</label>
<input placeholder="Set your password" type="password" name="password" id="password"></br>
</div><div class="pure-control-group">
<label for="password">Verify Password*:</label>
<input placeholder="Verify password" type="password" name="password_2" id="password_2"></br>
</div><p id="validate-status" style="color:red"></p>
<div class="pure-controls">
<button id="register-button" type="submit" class="pure-button pure-button-primary" disabled>Access</button></div>
</form>
<script type="text/javascript" src="monitor-register.js"></script>
</body></html>
"""
stack/monitor/webfiles/settings.cgi.in → stack/monitor/webfile-directory/settings.cgi.in
View file @ 694f3319
...@@ -17,14 +17,19 @@ config_file = "{{ config_cfg }}" ...@@ -17,14 +17,19 @@ config_file = "{{ config_cfg }}"
if not os.path.exists(config_file): if not os.path.exists(config_file):
print "Your software does <b>not</b> embed 0-knowledge. \ print "Your software does <b>not</b> embed 0-knowledge. \
This interface is useless in this case" This interface is useless in this case</body></html>"
exit(0) exit(0)
parser = ConfigParser.ConfigParser() parser = ConfigParser.ConfigParser()
parser.read(config_file) parser.read(config_file)
if not parser.has_section('public'):
print "<p>Your software does not use 0-knowledge settings.</p></body></html>"
exit(0)
for name in form: for name in form:
parser.set('public', name, form[name].value) if parser.has_option('public', name):
parser.set('public', name, form[name].value)
with open(config_file, 'w') as file: with open(config_file, 'w') as file:
parser.write(file) parser.write(file)
......
stack/monitor/webfiles/status.cgi.in → stack/monitor/webfile-directory/status.cgi.in
View file @ 694f3319
...@@ -3,6 +3,7 @@ ...@@ -3,6 +3,7 @@
import cgi import cgi
import cgitb import cgitb
import json import json
import os
import subprocess import subprocess
def refresh(): def refresh():
...@@ -11,10 +12,21 @@ def refresh(): ...@@ -11,10 +12,21 @@ def refresh():
cgitb.enable(display=0, logdir="/tmp/cgi.log") cgitb.enable(display=0, logdir="/tmp/cgi.log")
form = cgi.FieldStorage() form = cgi.FieldStorage()
if "refresh" in form:
refresh()
json_file = "{{ json_file }}" json_file = "{{ json_file }}"
if not os.path.exists(json_file) or "refresh" in form:
refresh()
if not os.path.exists(json_file):
print """<html><head>
<link rel="stylesheet" href="pure-min.css">
<link rel="stylesheet" href="/style.css">
</head><body>
<h1>Monitoring :</h1>
No status file found</p></body></html>"""
exit(0)
result = json.load(open(json_file)) result = json.load(open(json_file))
print "<html><head>" print "<html><head>"
...@@ -33,7 +45,7 @@ print "<br/>" ...@@ -33,7 +45,7 @@ print "<br/>"
print "<h2>These scripts and promises have failed :</h2>" print "<h2>These scripts and promises have failed :</h2>"
for r in result: for r in result:
if result[r] != '': if result[r] != '':
print "<h3>%s</h3><p style=\"padding-left:30px;\">%s</p>" % (r, result[r]) print "<h3>%s</h3><pre style=\"padding-left:30px;\">%s</pre>" % (cgi.escape(r), cgi.escape(result[r]))
print "<br/>" print "<br/>"
print "<h2>These scripts and promises were successful :</h2>" print "<h2>These scripts and promises were successful :</h2>"
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7