Commit a37ad715 authored by Claes Sjofors's avatar Claes Sjofors

Merge branch 'master' of pwrcvs:/data1/git/pwr

parents d0f79c2f aea3b739
# Doxyfile 1.3.4 # Doxyfile 1.6.1
# This file describes the settings to be used by the documentation system # This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project # doxygen (www.doxygen.org) for a project
...@@ -14,430 +14,667 @@ ...@@ -14,430 +14,667 @@
# Project related configuration options # Project related configuration options
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded # This tag specifies the encoding used for all characters in the config file
# that follow. The default is UTF-8 which is also the encoding used for all
# text before the first occurrence of this tag. Doxygen uses libiconv (or the
# iconv built into libc) for the transcoding. See
# http://www.gnu.org/software/libiconv for the list of possible encodings.
DOXYFILE_ENCODING = UTF-8
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
# by quotes) that should identify the project. # by quotes) that should identify the project.
PROJECT_NAME = PwrSourceCode PROJECT_NAME = PwrSourceCode
# The PROJECT_NUMBER tag can be used to enter a project or revision number. # The PROJECT_NUMBER tag can be used to enter a project or revision number.
# This could be handy for archiving the generated documentation or # This could be handy for archiving the generated documentation or
# if some version control system is used. # if some version control system is used.
PROJECT_NUMBER = V4.1.0 PROJECT_NUMBER = V4.1.0
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
# base path where the generated documentation will be put. # base path where the generated documentation will be put.
# If a relative path is entered, it will be relative to the location # If a relative path is entered, it will be relative to the location
# where doxygen was started. If left blank the current directory will be used. # where doxygen was started. If left blank the current directory will be used.
OUTPUT_DIRECTORY = OUTPUT_DIRECTORY =
# The OUTPUT_LANGUAGE tag is used to specify the language in which all # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
# documentation generated by doxygen is written. Doxygen will use this # 4096 sub-directories (in 2 levels) under the output directory of each output
# information to generate all constant output in the proper language. # format and will distribute the generated files over these directories.
# The default language is English, other supported languages are: # Enabling this option can be useful when feeding doxygen a huge amount of
# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, # source files, where putting all generated files in the same directory would
# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en # otherwise cause performance problems for the file system.
# (Japanese with English messages), Korean, Norwegian, Polish, Portuguese,
# Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
OUTPUT_LANGUAGE = English CREATE_SUBDIRS = NO
# This tag can be used to specify the encoding used in the generated output. # The OUTPUT_LANGUAGE tag is used to specify the language in which all
# The encoding is not always determined by the language that is chosen, # documentation generated by doxygen is written. Doxygen will use this
# but also whether or not the output is meant for Windows or non-Windows users. # information to generate all constant output in the proper language.
# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES # The default language is English, other supported languages are:
# forces the Windows encoding (this is the default for the Windows binary), # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
# whereas setting the tag to NO uses a Unix-style encoding (the default for # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
# all platforms other than Windows). # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
USE_WINDOWS_ENCODING = NO OUTPUT_LANGUAGE = English
# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
# include brief member descriptions after the members that are listed in # include brief member descriptions after the members that are listed in
# the file and class documentation (similar to JavaDoc). # the file and class documentation (similar to JavaDoc).
# Set to NO to disable this. # Set to NO to disable this.
BRIEF_MEMBER_DESC = YES BRIEF_MEMBER_DESC = YES
# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
# the brief description of a member or function before the detailed description. # the brief description of a member or function before the detailed description.
# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
# brief descriptions will be completely suppressed. # brief descriptions will be completely suppressed.
REPEAT_BRIEF = YES REPEAT_BRIEF = YES
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then # This tag implements a quasi-intelligent brief description abbreviator
# Doxygen will generate a detailed section even if there is only a brief # that is used to form the text in various listings. Each string
# in this list, if found as the leading text of the brief description, will be
# stripped from the text and the result after processing the whole list, is
# used as the annotated text. Otherwise, the brief description is used as-is.
# If left blank, the following values are used ("$name" is automatically
# replaced with the name of the entity): "The $name class" "The $name widget"
# "The $name file" "is" "provides" "specifies" "contains"
# "represents" "a" "an" "the"
ABBREVIATE_BRIEF =
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
# Doxygen will generate a detailed section even if there is only a brief
# description. # description.
ALWAYS_DETAILED_SEC = NO ALWAYS_DETAILED_SEC = NO
# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
# members of a class in the documentation of that class as if those members were # inherited members of a class in the documentation of that class as if those
# ordinary class members. Constructors, destructors and assignment operators of # members were ordinary class members. Constructors, destructors and assignment
# the base classes will not be shown. # operators of the base classes will not be shown.
INLINE_INHERITED_MEMB = NO INLINE_INHERITED_MEMB = NO
# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
# path before files name in the file list and in the header files. If set # path before files name in the file list and in the header files. If set
# to NO the shortest path that makes the file name unique will be used. # to NO the shortest path that makes the file name unique will be used.
FULL_PATH_NAMES = NO FULL_PATH_NAMES = NO
# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
# can be used to strip a user-defined part of the path. Stripping is # can be used to strip a user-defined part of the path. Stripping is
# only done if one of the specified strings matches the left-hand part of # only done if one of the specified strings matches the left-hand part of
# the path. It is allowed to use relative paths in the argument list. # the path. The tag can be used to show relative paths in the file list.
# If left blank the directory from which doxygen is run is used as the
# path to strip.
STRIP_FROM_PATH =
STRIP_FROM_PATH = # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
# the path mentioned in the documentation of a class, which tells
# the reader which header file to include in order to use a class.
# If left blank only the name of the header file containing the class
# definition is used. Otherwise one should specify the include paths that
# are normally passed to the compiler using the -I flag.
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter STRIP_FROM_INC_PATH =
# (but less readable) file names. This can be useful is your file systems
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
# (but less readable) file names. This can be useful is your file systems
# doesn't support long names like on DOS, Mac, or CD-ROM. # doesn't support long names like on DOS, Mac, or CD-ROM.
SHORT_NAMES = NO SHORT_NAMES = NO
# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
# will interpret the first line (until the first dot) of a JavaDoc-style # will interpret the first line (until the first dot) of a JavaDoc-style
# comment as the brief description. If set to NO, the JavaDoc # comment as the brief description. If set to NO, the JavaDoc
# comments will behave just like the Qt-style comments (thus requiring an # comments will behave just like regular Qt-style comments
# explict @brief command for a brief description. # (thus requiring an explicit @brief command for a brief description.)
JAVADOC_AUTOBRIEF = NO JAVADOC_AUTOBRIEF = NO
# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen # If the QT_AUTOBRIEF tag is set to YES then Doxygen will
# treat a multi-line C++ special comment block (i.e. a block of //! or /// # interpret the first line (until the first dot) of a Qt-style
# comments) as a brief description. This used to be the default behaviour. # comment as the brief description. If set to NO, the comments
# The new default is to treat a multi-line C++ comment block as a detailed # will behave just like regular Qt-style comments (thus requiring
# description. Set this tag to YES if you prefer the old behaviour instead. # an explicit \brief command for a brief description.)
MULTILINE_CPP_IS_BRIEF = NO QT_AUTOBRIEF = NO
# If the DETAILS_AT_TOP tag is set to YES then Doxygen # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
# will output the detailed description near the top, like JavaDoc. # treat a multi-line C++ special comment block (i.e. a block of //! or ///
# If set to NO, the detailed description appears after the member # comments) as a brief description. This used to be the default behaviour.
# documentation. # The new default is to treat a multi-line C++ comment block as a detailed
# description. Set this tag to YES if you prefer the old behaviour instead.
DETAILS_AT_TOP = NO MULTILINE_CPP_IS_BRIEF = NO
# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
# member inherits the documentation from any documented member that it # member inherits the documentation from any documented member that it
# reimplements. # re-implements.
INHERIT_DOCS = YES INHERIT_DOCS = YES
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
# tag is set to YES, then doxygen will reuse the documentation of the first # a new page for each member. If set to NO, the documentation of a member will
# member in the group (if any) for the other members of the group. By default # be part of the file/class/namespace that contains it.
# all members of a group must be documented explicitly.
DISTRIBUTE_GROUP_DOC = NO SEPARATE_MEMBER_PAGES = NO
# The TAB_SIZE tag can be used to set the number of spaces in a tab. # The TAB_SIZE tag can be used to set the number of spaces in a tab.
# Doxygen uses this value to replace tabs by spaces in code fragments. # Doxygen uses this value to replace tabs by spaces in code fragments.
TAB_SIZE = 8 TAB_SIZE = 8
# This tag can be used to specify a number of aliases that acts # This tag can be used to specify a number of aliases that acts
# as commands in the documentation. An alias has the form "name=value". # as commands in the documentation. An alias has the form "name=value".
# For example adding "sideeffect=\par Side Effects:\n" will allow you to # For example adding "sideeffect=\par Side Effects:\n" will allow you to
# put the command \sideeffect (or @sideeffect) in the documentation, which # put the command \sideeffect (or @sideeffect) in the documentation, which
# will result in a user-defined paragraph with heading "Side Effects:". # will result in a user-defined paragraph with heading "Side Effects:".
# You can put \n's in the value part of an alias to insert newlines. # You can put \n's in the value part of an alias to insert newlines.
ALIASES = ALIASES =
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
# only. Doxygen will then generate output that is more tailored for C. # sources only. Doxygen will then generate output that is more tailored for C.
# For instance, some of the names that are used will be different. The list # For instance, some of the names that are used will be different. The list
# of all members will be omitted, etc. # of all members will be omitted, etc.
OPTIMIZE_OUTPUT_FOR_C = NO OPTIMIZE_OUTPUT_FOR_C = NO
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
# only. Doxygen will then generate output that is more tailored for Java. # sources only. Doxygen will then generate output that is more tailored for
# For instance, namespaces will be presented as packages, qualified scopes # Java. For instance, namespaces will be presented as packages, qualified
# will look different, etc. # scopes will look different, etc.
OPTIMIZE_OUTPUT_JAVA = NO OPTIMIZE_OUTPUT_JAVA = NO
# Set the SUBGROUPING tag to YES (the default) to allow class member groups of # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
# the same type (for instance a group of public functions) to be put as a # sources only. Doxygen will then generate output that is more tailored for
# subgroup of that type (e.g. under the Public Functions section). Set it to # Fortran.
# NO to prevent subgrouping. Alternatively, this can be done per class using
OPTIMIZE_FOR_FORTRAN = NO
# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
# sources. Doxygen will then generate output that is tailored for
# VHDL.
OPTIMIZE_OUTPUT_VHDL = NO
# Doxygen selects the parser to use depending on the extension of the files it parses.
# With this tag you can assign which parser to use for a given extension.
# Doxygen has a built-in mapping, but you can override or extend it using this tag.
# The format is ext=language, where ext is a file extension, and language is one of
# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
EXTENSION_MAPPING =
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
# to include (a tag file for) the STL sources as input, then you should
# set this tag to YES in order to let doxygen match functions declarations and
# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
# func(std::string) {}). This also make the inheritance and collaboration
# diagrams that involve STL classes more complete and accurate.
BUILTIN_STL_SUPPORT = NO
# If you use Microsoft's C++/CLI language, you should set this option to YES to
# enable parsing support.
CPP_CLI_SUPPORT = NO
# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
# Doxygen will parse them like normal C++ but will assume all classes use public
# instead of private inheritance when no explicit protection keyword is present.
SIP_SUPPORT = NO
# For Microsoft's IDL there are propget and propput attributes to indicate getter
# and setter methods for a property. Setting this option to YES (the default)
# will make doxygen to replace the get and set methods by a property in the
# documentation. This will only work if the methods are indeed getting or
# setting a simple type. If this is not the case, or you want to show the
# methods anyway, you should set this option to NO.
IDL_PROPERTY_SUPPORT = YES
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
# tag is set to YES, then doxygen will reuse the documentation of the first
# member in the group (if any) for the other members of the group. By default
# all members of a group must be documented explicitly.
DISTRIBUTE_GROUP_DOC = NO
# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
# the same type (for instance a group of public functions) to be put as a
# subgroup of that type (e.g. under the Public Functions section). Set it to
# NO to prevent subgrouping. Alternatively, this can be done per class using
# the \nosubgrouping command. # the \nosubgrouping command.
SUBGROUPING = YES SUBGROUPING = YES
# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
# is documented as struct, union, or enum with the name of the typedef. So
# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
# with name TypeT. When disabled the typedef will appear as a member of a file,
# namespace, or class. And the struct will be named TypeS. This can typically
# be useful for C code in case the coding convention dictates that all compound
# types are typedef'ed and only the typedef is referenced, never the tag name.
TYPEDEF_HIDES_STRUCT = NO
# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
# determine which symbols to keep in memory and which to flush to disk.
# When the cache is full, less often used symbols will be written to disk.
# For small to medium size projects (<1000 input files) the default value is
# probably good enough. For larger projects a too small cache size can cause
# doxygen to be busy swapping symbols to and from disk most of the time
# causing a significant performance penality.
# If the system has enough physical memory increasing the cache will improve the
# performance by keeping more symbols in memory. Note that the value works on
# a logarithmic scale so increasing the size by one will rougly double the
# memory usage. The cache size is given by this formula:
# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
# corresponding to a cache size of 2^16 = 65536 symbols
SYMBOL_CACHE_SIZE = 0
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# Build related configuration options # Build related configuration options
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
# documentation are documented, even if no documentation was available. # documentation are documented, even if no documentation was available.
# Private class members and static file members will be hidden unless # Private class members and static file members will be hidden unless
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
EXTRACT_ALL = YES EXTRACT_ALL = YES
# If the EXTRACT_PRIVATE tag is set to YES all private members of a class # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
# will be included in the documentation. # will be included in the documentation.
EXTRACT_PRIVATE = YES EXTRACT_PRIVATE = YES
# If the EXTRACT_STATIC tag is set to YES all static members of a file # If the EXTRACT_STATIC tag is set to YES all static members of a file
# will be included in the documentation. # will be included in the documentation.
EXTRACT_STATIC = YES EXTRACT_STATIC = YES
# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
# defined locally in source files will be included in the documentation. # defined locally in source files will be included in the documentation.
# If set to NO only classes defined in header files are included. # If set to NO only classes defined in header files are included.
EXTRACT_LOCAL_CLASSES = YES EXTRACT_LOCAL_CLASSES = YES
# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all # This flag is only useful for Objective-C code. When set to YES local
# undocumented members of documented classes, files or namespaces. # methods, which are defined in the implementation section but not in
# If set to NO (the default) these members will be included in the # the interface are included in the documentation.
# various overviews, but no documentation section is generated. # If set to NO (the default) only methods in the interface are included.
EXTRACT_LOCAL_METHODS = NO
# If this flag is set to YES, the members of anonymous namespaces will be
# extracted and appear in the documentation as a namespace called
# 'anonymous_namespace{file}', where file will be replaced with the base
# name of the file that contains the anonymous namespace. By default
# anonymous namespace are hidden.
EXTRACT_ANON_NSPACES = NO
# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
# undocumented members of documented classes, files or namespaces.
# If set to NO (the default) these members will be included in the
# various overviews, but no documentation section is generated.
# This option has no effect if EXTRACT_ALL is enabled. # This option has no effect if EXTRACT_ALL is enabled.
HIDE_UNDOC_MEMBERS = YES HIDE_UNDOC_MEMBERS = YES
# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
# undocumented classes that are normally visible in the class hierarchy. # undocumented classes that are normally visible in the class hierarchy.
# If set to NO (the default) these classes will be included in the various # If set to NO (the default) these classes will be included in the various
# overviews. This option has no effect if EXTRACT_ALL is enabled. # overviews. This option has no effect if EXTRACT_ALL is enabled.
HIDE_UNDOC_CLASSES = YES HIDE_UNDOC_CLASSES = YES
# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
# friend (class|struct|union) declarations. # friend (class|struct|union) declarations.
# If set to NO (the default) these declarations will be included in the # If set to NO (the default) these declarations will be included in the
# documentation. # documentation.
HIDE_FRIEND_COMPOUNDS = NO HIDE_FRIEND_COMPOUNDS = NO
# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
# documentation blocks found inside the body of a function. # documentation blocks found inside the body of a function.
# If set to NO (the default) these blocks will be appended to the # If set to NO (the default) these blocks will be appended to the
# function's detailed documentation block. # function's detailed documentation block.
HIDE_IN_BODY_DOCS = NO HIDE_IN_BODY_DOCS = NO
# The INTERNAL_DOCS tag determines if documentation # The INTERNAL_DOCS tag determines if documentation
# that is typed after a \internal command is included. If the tag is set # that is typed after a \internal command is included. If the tag is set
# to NO (the default) then the documentation will be excluded. # to NO (the default) then the documentation will be excluded.
# Set it to YES to include the internal documentation. # Set it to YES to include the internal documentation.
INTERNAL_DOCS = NO INTERNAL_DOCS = NO
# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
# file names in lower-case letters. If set to YES upper-case letters are also # file names in lower-case letters. If set to YES upper-case letters are also
# allowed. This is useful if you have classes or files whose names only differ # allowed. This is useful if you have classes or files whose names only differ
# in case and if your file system supports case sensitive file names. Windows # in case and if your file system supports case sensitive file names. Windows
# users are advised to set this option to NO. # and Mac users are advised to set this option to NO.
CASE_SENSE_NAMES = YES CASE_SENSE_NAMES = YES
# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
# will show members with their full class and namespace scopes in the # will show members with their full class and namespace scopes in the
# documentation. If set to YES the scope will be hidden. # documentation. If set to YES the scope will be hidden.
HIDE_SCOPE_NAMES = NO HIDE_SCOPE_NAMES = NO
# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
# will put a list of the files that are included by a file in the documentation # will put a list of the files that are included by a file in the documentation
# of that file. # of that file.
SHOW_INCLUDE_FILES = YES SHOW_INCLUDE_FILES = YES
# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
# is inserted in the documentation for inline members. # is inserted in the documentation for inline members.
INLINE_INFO = YES INLINE_INFO = YES
# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
# will sort the (detailed) documentation of file and class members # will sort the (detailed) documentation of file and class members
# alphabetically by member name. If set to NO the members will appear in # alphabetically by member name. If set to NO the members will appear in
# declaration order. # declaration order.
SORT_MEMBER_DOCS = YES SORT_MEMBER_DOCS = YES
# The GENERATE_TODOLIST tag can be used to enable (YES) or # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
# disable (NO) the todo list. This list is created by putting \todo # brief documentation of file, namespace and class members alphabetically
# by member name. If set to NO (the default) the members will appear in
# declaration order.
SORT_BRIEF_DOCS = NO
# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
SORT_MEMBERS_CTORS_1ST = NO
# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
# hierarchy of group names into alphabetical order. If set to NO (the default)
# the group names will appear in their defined order.
SORT_GROUP_NAMES = NO
# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
# sorted by fully-qualified names, including namespaces. If set to
# NO (the default), the class list will be sorted only by class name,
# not including the namespace part.
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
# Note: This option applies only to the class list, not to the
# alphabetical list.
SORT_BY_SCOPE_NAME = NO
# The GENERATE_TODOLIST tag can be used to enable (YES) or
# disable (NO) the todo list. This list is created by putting \todo
# commands in the documentation. # commands in the documentation.
GENERATE_TODOLIST = YES GENERATE_TODOLIST = YES
# The GENERATE_TESTLIST tag can be used to enable (YES) or # The GENERATE_TESTLIST tag can be used to enable (YES) or
# disable (NO) the test list. This list is created by putting \test # disable (NO) the test list. This list is created by putting \test
# commands in the documentation. # commands in the documentation.
GENERATE_TESTLIST = YES GENERATE_TESTLIST = YES
# The GENERATE_BUGLIST tag can be used to enable (YES) or # The GENERATE_BUGLIST tag can be used to enable (YES) or
# disable (NO) the bug list. This list is created by putting \bug # disable (NO) the bug list. This list is created by putting \bug
# commands in the documentation. # commands in the documentation.
GENERATE_BUGLIST = YES GENERATE_BUGLIST = YES
# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
# disable (NO) the deprecated list. This list is created by putting # disable (NO) the deprecated list. This list is created by putting
# \deprecated commands in the documentation. # \deprecated commands in the documentation.
GENERATE_DEPRECATEDLIST= YES GENERATE_DEPRECATEDLIST= YES
# The ENABLED_SECTIONS tag can be used to enable conditional # The ENABLED_SECTIONS tag can be used to enable conditional
# documentation sections, marked by \if sectionname ... \endif. # documentation sections, marked by \if sectionname ... \endif.
ENABLED_SECTIONS = ENABLED_SECTIONS =
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
# the initial value of a variable or define consists of for it to appear in # the initial value of a variable or define consists of for it to appear in
# the documentation. If the initializer consists of more lines than specified # the documentation. If the initializer consists of more lines than specified
# here it will be hidden. Use a value of 0 to hide initializers completely. # here it will be hidden. Use a value of 0 to hide initializers completely.
# The appearance of the initializer of individual variables and defines in the # The appearance of the initializer of individual variables and defines in the
# documentation can be controlled using \showinitializer or \hideinitializer # documentation can be controlled using \showinitializer or \hideinitializer
# command in the documentation regardless of this setting. # command in the documentation regardless of this setting.
MAX_INITIALIZER_LINES = 30 MAX_INITIALIZER_LINES = 30
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
# at the bottom of the documentation of classes and structs. If set to YES the # at the bottom of the documentation of classes and structs. If set to YES the
# list will mention the files that were used to generate the documentation. # list will mention the files that were used to generate the documentation.
SHOW_USED_FILES = YES SHOW_USED_FILES = YES
# If the sources in your project are distributed over multiple directories
# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
# in the documentation. The default is NO.
SHOW_DIRECTORIES = NO
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
SHOW_FILES = YES
# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
# Namespaces page.
# This will remove the Namespaces entry from the Quick Index
# and from the Folder Tree View (if specified). The default is YES.
SHOW_NAMESPACES = YES
# The FILE_VERSION_FILTER tag can be used to specify a program or script that
# doxygen should invoke to get the current version for each file (typically from
# the version control system). Doxygen will invoke the program by executing (via
# popen()) the command <command> <input-file>, where <command> is the value of
# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
# provided by doxygen. Whatever the program writes to standard output
# is used as the file version. See the manual for examples.
FILE_VERSION_FILTER =
# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
# doxygen. The layout file controls the global structure of the generated output files
# in an output format independent way. The create the layout file that represents
# doxygen's defaults, run doxygen with the -l option. You can optionally specify a
# file name after the option, if omitted DoxygenLayout.xml will be used as the name
# of the layout file.
LAYOUT_FILE =
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options related to warning and progress messages # configuration options related to warning and progress messages
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# The QUIET tag can be used to turn on/off the messages that are generated # The QUIET tag can be used to turn on/off the messages that are generated
# by doxygen. Possible values are YES and NO. If left blank NO is used. # by doxygen. Possible values are YES and NO. If left blank NO is used.
QUIET = YES QUIET = YES
# The WARNINGS tag can be used to turn on/off the warning messages that are # The WARNINGS tag can be used to turn on/off the warning messages that are
# generated by doxygen. Possible values are YES and NO. If left blank # generated by doxygen. Possible values are YES and NO. If left blank
# NO is used. # NO is used.
WARNINGS = YES WARNINGS = YES
# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
# for undocumented members. If EXTRACT_ALL is set to YES then this flag will # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
# automatically be disabled. # automatically be disabled.
WARN_IF_UNDOCUMENTED = YES WARN_IF_UNDOCUMENTED = YES
# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
# potential errors in the documentation, such as not documenting some # potential errors in the documentation, such as not documenting some
# parameters in a documented function, or documenting parameters that # parameters in a documented function, or documenting parameters that
# don't exist or using markup commands wrongly. # don't exist or using markup commands wrongly.
WARN_IF_DOC_ERROR = YES WARN_IF_DOC_ERROR = YES
# The WARN_FORMAT tag determines the format of the warning messages that # This WARN_NO_PARAMDOC option can be abled to get warnings for
# doxygen can produce. The string should contain the $file, $line, and $text # functions that are documented, but have no documentation for their parameters
# tags, which will be replaced by the file and line number from which the # or return value. If set to NO (the default) doxygen will only warn about
# warning originated and the warning text. # wrong or incomplete parameter documentation, but not about the absence of
# documentation.
WARN_NO_PARAMDOC = NO
# The WARN_FORMAT tag determines the format of the warning messages that
# doxygen can produce. The string should contain the $file, $line, and $text
# tags, which will be replaced by the file and line number from which the
# warning originated and the warning text. Optionally the format may contain
# $version, which will be replaced by the version of the file (if it could
# be obtained via FILE_VERSION_FILTER)
WARN_FORMAT = "$file:$line: $text" WARN_FORMAT = "$file:$line: $text"
# The WARN_LOGFILE tag can be used to specify a file to which warning # The WARN_LOGFILE tag can be used to specify a file to which warning
# and error messages should be written. If left blank the output is written # and error messages should be written. If left blank the output is written
# to stderr. # to stderr.
WARN_LOGFILE = WARN_LOGFILE =
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options related to the input files # configuration options related to the input files
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# The INPUT tag can be used to specify the files and/or directories that contain # The INPUT tag can be used to specify the files and/or directories that contain
# documented source files. You may enter file names like "myfile.cpp" or # documented source files. You may enter file names like "myfile.cpp" or
# directories like "/usr/src/myproject". Separate the files or directories # directories like "/usr/src/myproject". Separate the files or directories
# with spaces. # with spaces.
INPUT = $(pwre_croot)/src/doc/dox/src/doxygen.dx \ INPUT = $(pwre_croot)/src/doc/dox/src/doxygen.dx \
$(pwre_croot)/src/exp/inc/src \ $(pwre_croot)/src/exp/inc/src \
$(pwre_croot)/xtt/lib/glow/src \
$(pwre_croot)/xtt/lib/ge/src \
$(pwre_croot)/src/lib/rt/src $(pwre_croot)/src/lib/rt/src
# If the value of the INPUT tag contains directories, you can use the # This tag can be used to specify the character encoding of the source files
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
# and *.h) to filter out the source-files in the directories. If left # also the default input encoding. Doxygen uses libiconv (or the iconv built
# blank the following patterns are tested: # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp # the list of possible encodings.
# *.h++ *.idl *.odl *.cs *.php *.php3 *.inc
INPUT_ENCODING = UTF-8
# If the value of the INPUT tag contains directories, you can use the
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
# and *.h) to filter out the source-files in the directories. If left
# blank the following patterns are tested:
# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
FILE_PATTERNS = *.cpp \ FILE_PATTERNS = *.cpp \
*.c \ *.c \
*.h *.h
# The RECURSIVE tag can be used to turn specify whether or not subdirectories # The RECURSIVE tag can be used to turn specify whether or not subdirectories
# should be searched for input files as well. Possible values are YES and NO. # should be searched for input files as well. Possible values are YES and NO.
# If left blank NO is used. # If left blank NO is used.
RECURSIVE = YES RECURSIVE = YES
# The EXCLUDE tag can be used to specify files and/or directories that should # The EXCLUDE tag can be used to specify files and/or directories that should
# excluded from the INPUT source files. This way you can easily exclude a # excluded from the INPUT source files. This way you can easily exclude a
# subdirectory from a directory tree whose root is specified with the INPUT tag. # subdirectory from a directory tree whose root is specified with the INPUT tag.
EXCLUDE = EXCLUDE =
# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories # The EXCLUDE_SYMLINKS tag can be used select whether or not files or
# that are symbolic links (a Unix filesystem feature) are excluded from the input. # directories that are symbolic links (a Unix filesystem feature) are excluded
# from the input.
EXCLUDE_SYMLINKS = NO EXCLUDE_SYMLINKS = NO
# If the value of the INPUT tag contains directories, you can use the # If the value of the INPUT tag contains directories, you can use the
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
# certain files from those directories. # certain files from those directories. Note that the wildcards are matched
# against the file with absolute path, so to exclude all test directories
# for example use the pattern */test/*
EXCLUDE_PATTERNS = *_bitmap_*.h EXCLUDE_PATTERNS = *_bitmap_*.h
# The EXAMPLE_PATH tag can be used to specify one or more files or # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
# directories that contain example code fragments that are included (see # (namespaces, classes, functions, etc.) that should be excluded from the
# output. The symbol name can be a fully qualified name, a word, or if the
# wildcard * is used, a substring. Examples: ANamespace, AClass,
# AClass::ANamespace, ANamespace::*Test
EXCLUDE_SYMBOLS =
# The EXAMPLE_PATH tag can be used to specify one or more files or
# directories that contain example code fragments that are included (see
# the \include command). # the \include command).
EXAMPLE_PATH = EXAMPLE_PATH =
# If the value of the EXAMPLE_PATH tag contains directories, you can use the # If the value of the EXAMPLE_PATH tag contains directories, you can use the
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
# and *.h) to filter out the source-files in the directories. If left # and *.h) to filter out the source-files in the directories. If left
# blank all files are included. # blank all files are included.
EXAMPLE_PATTERNS = EXAMPLE_PATTERNS =
# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
# searched for input files to be used with the \include or \dontinclude # searched for input files to be used with the \include or \dontinclude
# commands irrespective of the value of the RECURSIVE tag. # commands irrespective of the value of the RECURSIVE tag.
# Possible values are YES and NO. If left blank NO is used. # Possible values are YES and NO. If left blank NO is used.
EXAMPLE_RECURSIVE = NO EXAMPLE_RECURSIVE = NO
# The IMAGE_PATH tag can be used to specify one or more files or # The IMAGE_PATH tag can be used to specify one or more files or
# directories that contain image that are included in the documentation (see # directories that contain image that are included in the documentation (see
# the \image command). # the \image command).
IMAGE_PATH = IMAGE_PATH =
# The INPUT_FILTER tag can be used to specify a program that doxygen should # The INPUT_FILTER tag can be used to specify a program that doxygen should
# invoke to filter for each input file. Doxygen will invoke the filter program # invoke to filter for each input file. Doxygen will invoke the filter program
# by executing (via popen()) the command <filter> <input-file>, where <filter> # by executing (via popen()) the command <filter> <input-file>, where <filter>
# is the value of the INPUT_FILTER tag, and <input-file> is the name of an # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
# input file. Doxygen will then use the output that the filter program writes # input file. Doxygen will then use the output that the filter program writes
# to standard output. # to standard output.
# If FILTER_PATTERNS is specified, this tag will be
# ignored.
INPUT_FILTER =
INPUT_FILTER = # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
# basis.
# Doxygen will compare the file name with each pattern and apply the
# filter if there is a match.
# The filters are a list of the form:
# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
# is applied to all files.
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using FILTER_PATTERNS =
# INPUT_FILTER) will be used to filter the input files when producing source
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
# INPUT_FILTER) will be used to filter the input files when producing source
# files to browse (i.e. when SOURCE_BROWSER is set to YES). # files to browse (i.e. when SOURCE_BROWSER is set to YES).
FILTER_SOURCE_FILES = NO FILTER_SOURCE_FILES = NO
...@@ -446,36 +683,54 @@ FILTER_SOURCE_FILES = NO ...@@ -446,36 +683,54 @@ FILTER_SOURCE_FILES = NO
# configuration options related to source browsing # configuration options related to source browsing
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the SOURCE_BROWSER tag is set to YES then a list of source files will # If the SOURCE_BROWSER tag is set to YES then a list of source files will
# be generated. Documented entities will be cross-referenced with these sources. # be generated. Documented entities will be cross-referenced with these sources.
# Note: To get rid of all source code in the generated output, make sure also
# VERBATIM_HEADERS is set to NO.
SOURCE_BROWSER = YES SOURCE_BROWSER = YES
# Setting the INLINE_SOURCES tag to YES will include the body # Setting the INLINE_SOURCES tag to YES will include the body
# of functions and classes directly in the documentation. # of functions and classes directly in the documentation.
INLINE_SOURCES = NO INLINE_SOURCES = NO
# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
# doxygen to hide any special comment blocks from generated source code # doxygen to hide any special comment blocks from generated source code
# fragments. Normal C and C++ comments will always remain visible. # fragments. Normal C and C++ comments will always remain visible.
STRIP_CODE_COMMENTS = YES STRIP_CODE_COMMENTS = YES
# If the REFERENCED_BY_RELATION tag is set to YES (the default) # If the REFERENCED_BY_RELATION tag is set to YES
# then for each documented function all documented # then for each documented function all documented
# functions referencing it will be listed. # functions referencing it will be listed.
REFERENCED_BY_RELATION = YES REFERENCED_BY_RELATION = YES
# If the REFERENCES_RELATION tag is set to YES (the default) # If the REFERENCES_RELATION tag is set to YES
# then for each documented function all documented entities # then for each documented function all documented entities
# called/used by that function will be listed. # called/used by that function will be listed.
REFERENCES_RELATION = YES REFERENCES_RELATION = YES
# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
# will generate a verbatim copy of the header file for each class for # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
# link to the source code.
# Otherwise they will link to the documentation.
REFERENCES_LINK_SOURCE = YES
# If the USE_HTAGS tag is set to YES then the references to source code
# will point to the HTML generated by the htags(1) tool instead of doxygen
# built-in source browser. The htags tool is part of GNU's global source
# tagging system (see http://www.gnu.org/software/global/global.html). You
# will need version 4.8.6 or higher.
USE_HTAGS = NO
# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
# will generate a verbatim copy of the header file for each class for
# which an include is specified. Set to NO to disable this. # which an include is specified. Set to NO to disable this.
VERBATIM_HEADERS = YES VERBATIM_HEADERS = YES
...@@ -484,277 +739,393 @@ VERBATIM_HEADERS = YES ...@@ -484,277 +739,393 @@ VERBATIM_HEADERS = YES
# configuration options related to the alphabetical class index # configuration options related to the alphabetical class index
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
# of all compounds will be generated. Enable this if the project # of all compounds will be generated. Enable this if the project
# contains a lot of classes, structs, unions or interfaces. # contains a lot of classes, structs, unions or interfaces.
ALPHABETICAL_INDEX = YES ALPHABETICAL_INDEX = YES
# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
# in which this list will be split (can be a number in the range [1..20]) # in which this list will be split (can be a number in the range [1..20])
COLS_IN_ALPHA_INDEX = 3 COLS_IN_ALPHA_INDEX = 3
# In case all classes in a project start with a common prefix, all # In case all classes in a project start with a common prefix, all
# classes will be put under the same header in the alphabetical index. # classes will be put under the same header in the alphabetical index.
# The IGNORE_PREFIX tag can be used to specify one or more prefixes that # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
# should be ignored while generating the index headers. # should be ignored while generating the index headers.
IGNORE_PREFIX = IGNORE_PREFIX =
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options related to the HTML output # configuration options related to the HTML output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_HTML tag is set to YES (the default) Doxygen will # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
# generate HTML output. # generate HTML output.
GENERATE_HTML = YES GENERATE_HTML = YES
# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be # If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `html' will be used as the default path. # put in front of it. If left blank `html' will be used as the default path.
HTML_OUTPUT = $(pwr_doc)/dox HTML_OUTPUT = $(pwr_doc)/dox
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
# each generated HTML page (for example: .htm,.php,.asp). If it is left blank # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
# doxygen will generate files with .html extension. # doxygen will generate files with .html extension.
HTML_FILE_EXTENSION = .html HTML_FILE_EXTENSION = .html
# The HTML_HEADER tag can be used to specify a personal HTML header for # The HTML_HEADER tag can be used to specify a personal HTML header for
# each generated HTML page. If it is left blank doxygen will generate a # each generated HTML page. If it is left blank doxygen will generate a
# standard header. # standard header.
HTML_HEADER = HTML_HEADER =
# The HTML_FOOTER tag can be used to specify a personal HTML footer for # The HTML_FOOTER tag can be used to specify a personal HTML footer for
# each generated HTML page. If it is left blank doxygen will generate a # each generated HTML page. If it is left blank doxygen will generate a
# standard footer. # standard footer.
HTML_FOOTER = HTML_FOOTER =
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
# style sheet that is used by each HTML page. It can be used to # style sheet that is used by each HTML page. It can be used to
# fine-tune the look of the HTML output. If the tag is left blank doxygen # fine-tune the look of the HTML output. If the tag is left blank doxygen
# will generate a default style sheet # will generate a default style sheet. Note that doxygen will try to copy
# the style sheet file to the HTML output directory, so don't put your own
# stylesheet in the HTML output directory as well, or it will be erased!
HTML_STYLESHEET = HTML_STYLESHEET =
# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
# files or namespaces will be aligned in HTML using tables. If set to # files or namespaces will be aligned in HTML using tables. If set to
# NO a bullet list will be used. # NO a bullet list will be used.
HTML_ALIGN_MEMBERS = YES HTML_ALIGN_MEMBERS = YES
# If the GENERATE_HTMLHELP tag is set to YES, additional index files # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# will be generated that can be used as input for tools like the # documentation will contain sections that can be hidden and shown after the
# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) # page has loaded. For this to work a browser that supports
# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
HTML_DYNAMIC_SECTIONS = NO
# If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard).
# To create a documentation set, doxygen will generate a Makefile in the
# HTML output directory. Running make will produce the docset in that
# directory and running "make install" will install the docset in
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
# it at startup.
# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
GENERATE_DOCSET = NO
# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
# feed. A documentation feed provides an umbrella under which multiple
# documentation sets from a single provider (such as a company or product suite)
# can be grouped.
DOCSET_FEEDNAME = "Doxygen generated docs"
# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
# should uniquely identify the documentation set bundle. This should be a
# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
# will append .docset to the name.
DOCSET_BUNDLE_ID = org.doxygen.Project
# If the GENERATE_HTMLHELP tag is set to YES, additional index files
# will be generated that can be used as input for tools like the
# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
# of the generated HTML documentation. # of the generated HTML documentation.
GENERATE_HTMLHELP = NO GENERATE_HTMLHELP = NO
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
# be used to specify the file name of the resulting .chm file. You # be used to specify the file name of the resulting .chm file. You
# can add a path in front of the file if the result should not be # can add a path in front of the file if the result should not be
# written to the html output dir. # written to the html output directory.
CHM_FILE = CHM_FILE =
# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
# be used to specify the location (absolute path including file name) of # be used to specify the location (absolute path including file name) of
# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
# the HTML help compiler on the generated index.hhp. # the HTML help compiler on the generated index.hhp.
HHC_LOCATION = HHC_LOCATION =
# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
# controls if a separate .chi index file is generated (YES) or that # controls if a separate .chi index file is generated (YES) or that
# it should be included in the master .chm file (NO). # it should be included in the master .chm file (NO).
GENERATE_CHI = NO GENERATE_CHI = NO
# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag # If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
# controls whether a binary table of contents is generated (YES) or a # is used to encode HtmlHelp index (hhk), content (hhc) and project file
# content.
CHM_INDEX_ENCODING =
# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
# controls whether a binary table of contents is generated (YES) or a
# normal table of contents (NO) in the .chm file. # normal table of contents (NO) in the .chm file.
BINARY_TOC = NO BINARY_TOC = NO
# The TOC_EXPAND flag can be set to YES to add extra items for group members # The TOC_EXPAND flag can be set to YES to add extra items for group members
# to the contents of the HTML help documentation and to the tree view. # to the contents of the HTML help documentation and to the tree view.
TOC_EXPAND = NO TOC_EXPAND = NO
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
# top of each HTML page. The value NO (the default) enables the index and # are set, an additional index file will be generated that can be used as input for
# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
# HTML documentation.
GENERATE_QHP = NO
# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
# be used to specify the file name of the resulting .qch file.
# The path specified is relative to the HTML output folder.
QCH_FILE =
# The QHP_NAMESPACE tag specifies the namespace to use when generating
# Qt Help Project output. For more information please see
# http://doc.trolltech.com/qthelpproject.html#namespace
QHP_NAMESPACE =
# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
# Qt Help Project output. For more information please see
# http://doc.trolltech.com/qthelpproject.html#virtual-folders
QHP_VIRTUAL_FOLDER = doc
# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
# For more information please see
# http://doc.trolltech.com/qthelpproject.html#custom-filters
QHP_CUST_FILTER_NAME =
# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
QHP_CUST_FILTER_ATTRS =
# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's
# filter section matches.
# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
QHP_SECT_FILTER_ATTRS =
# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
# be used to specify the location of Qt's qhelpgenerator.
# If non-empty doxygen will try to run qhelpgenerator on the generated
# .qhp file.
QHG_LOCATION =
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
# top of each HTML page. The value NO (the default) enables the index and
# the value YES disables it. # the value YES disables it.
DISABLE_INDEX = NO DISABLE_INDEX = NO
# This tag can be used to set the number of enum values (range [1..20]) # This tag can be used to set the number of enum values (range [1..20])
# that doxygen will group on one line in the generated HTML documentation. # that doxygen will group on one line in the generated HTML documentation.
ENUM_VALUES_PER_LINE = 4 ENUM_VALUES_PER_LINE = 4
# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# generated containing a tree-like index structure (just like the one that # structure should be generated to display hierarchical information.
# is generated for HTML Help). For this to work a browser that supports # If the tag value is set to YES, a side panel will be generated
# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, # containing a tree-like index structure (just like the one that
# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are # is generated for HTML Help). For this to work a browser that supports
# probably better off using the HTML help feature. # JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
# Windows users are probably better off using the HTML help feature.
GENERATE_TREEVIEW = NO GENERATE_TREEVIEW = NO
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
# used to set the initial width (in pixels) of the frame in which the tree # and Class Hierarchy pages using a tree view instead of an ordered list.
USE_INLINE_TREES = NO
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown. # is shown.
TREEVIEW_WIDTH = 250 TREEVIEW_WIDTH = 250
# Use this tag to change the font size of Latex formulas included
# as images in the HTML documentation. The default is 10. Note that
# when you change the font size after a successful doxygen run you need
# to manually remove any form_*.png images from the HTML output directory
# to force them to be regenerated.
FORMULA_FONTSIZE = 10
# When the SEARCHENGINE tag is enable doxygen will generate a search box for the HTML output. The underlying search engine uses javascript
# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP) or Qt help (GENERATE_QHP)
# there is already a search function so this one should typically
# be disabled.
SEARCHENGINE = YES
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options related to the LaTeX output # configuration options related to the LaTeX output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
# generate Latex output. # generate Latex output.
GENERATE_LATEX = NO GENERATE_LATEX = NO
# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be # If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `latex' will be used as the default path. # put in front of it. If left blank `latex' will be used as the default path.
LATEX_OUTPUT = latex LATEX_OUTPUT = latex
# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
# invoked. If left blank `latex' will be used as the default command name. # invoked. If left blank `latex' will be used as the default command name.
LATEX_CMD_NAME = latex LATEX_CMD_NAME = latex
# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
# generate index for LaTeX. If left blank `makeindex' will be used as the # generate index for LaTeX. If left blank `makeindex' will be used as the
# default command name. # default command name.
MAKEINDEX_CMD_NAME = makeindex MAKEINDEX_CMD_NAME = makeindex
# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
# LaTeX documents. This may be useful for small projects and may help to # LaTeX documents. This may be useful for small projects and may help to
# save some trees in general. # save some trees in general.
COMPACT_LATEX = NO COMPACT_LATEX = NO
# The PAPER_TYPE tag can be used to set the paper type that is used # The PAPER_TYPE tag can be used to set the paper type that is used
# by the printer. Possible values are: a4, a4wide, letter, legal and # by the printer. Possible values are: a4, a4wide, letter, legal and
# executive. If left blank a4wide will be used. # executive. If left blank a4wide will be used.
PAPER_TYPE = a4wide PAPER_TYPE = a4wide
# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
# packages that should be included in the LaTeX output. # packages that should be included in the LaTeX output.
EXTRA_PACKAGES = EXTRA_PACKAGES =
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
# the generated latex document. The header should contain everything until # the generated latex document. The header should contain everything until
# the first chapter. If it is left blank doxygen will generate a # the first chapter. If it is left blank doxygen will generate a
# standard header. Notice: only use this tag if you know what you are doing! # standard header. Notice: only use this tag if you know what you are doing!
LATEX_HEADER = LATEX_HEADER =
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
# is prepared for conversion to pdf (using ps2pdf). The pdf file will # is prepared for conversion to pdf (using ps2pdf). The pdf file will
# contain links (just like the HTML output) instead of page references # contain links (just like the HTML output) instead of page references
# This makes the output suitable for online browsing using a pdf viewer. # This makes the output suitable for online browsing using a pdf viewer.
PDF_HYPERLINKS = NO PDF_HYPERLINKS = NO
# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
# plain latex in the generated Makefile. Set this option to YES to get a # plain latex in the generated Makefile. Set this option to YES to get a
# higher quality PDF documentation. # higher quality PDF documentation.
USE_PDFLATEX = NO USE_PDFLATEX = NO
# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
# command to the generated LaTeX files. This will instruct LaTeX to keep # command to the generated LaTeX files. This will instruct LaTeX to keep
# running if errors occur, instead of asking the user for help. # running if errors occur, instead of asking the user for help.
# This option is also used when generating formulas in HTML. # This option is also used when generating formulas in HTML.
LATEX_BATCHMODE = NO LATEX_BATCHMODE = NO
# If LATEX_HIDE_INDICES is set to YES then doxygen will not # If LATEX_HIDE_INDICES is set to YES then doxygen will not
# include the index chapters (such as File Index, Compound Index, etc.) # include the index chapters (such as File Index, Compound Index, etc.)
# in the output. # in the output.
LATEX_HIDE_INDICES = NO LATEX_HIDE_INDICES = NO
# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.
LATEX_SOURCE_CODE = NO
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options related to the RTF output # configuration options related to the RTF output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
# The RTF output is optimised for Word 97 and may not look very pretty with # The RTF output is optimized for Word 97 and may not look very pretty with
# other RTF readers or editors. # other RTF readers or editors.
GENERATE_RTF = NO GENERATE_RTF = NO
# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be # If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `rtf' will be used as the default path. # put in front of it. If left blank `rtf' will be used as the default path.
RTF_OUTPUT = rtf RTF_OUTPUT = rtf
# If the COMPACT_RTF tag is set to YES Doxygen generates more compact # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
# RTF documents. This may be useful for small projects and may help to # RTF documents. This may be useful for small projects and may help to
# save some trees in general. # save some trees in general.
COMPACT_RTF = NO COMPACT_RTF = NO
# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
# will contain hyperlink fields. The RTF file will # will contain hyperlink fields. The RTF file will
# contain links (just like the HTML output) instead of page references. # contain links (just like the HTML output) instead of page references.
# This makes the output suitable for online browsing using WORD or other # This makes the output suitable for online browsing using WORD or other
# programs which support those fields. # programs which support those fields.
# Note: wordpad (write) and others do not support links. # Note: wordpad (write) and others do not support links.
RTF_HYPERLINKS = NO RTF_HYPERLINKS = NO
# Load stylesheet definitions from file. Syntax is similar to doxygen's # Load stylesheet definitions from file. Syntax is similar to doxygen's
# config file, i.e. a series of assigments. You only have to provide # config file, i.e. a series of assignments. You only have to provide
# replacements, missing definitions are set to their default value. # replacements, missing definitions are set to their default value.
RTF_STYLESHEET_FILE = RTF_STYLESHEET_FILE =
# Set optional variables used in the generation of an rtf document. # Set optional variables used in the generation of an rtf document.
# Syntax is similar to doxygen's config file. # Syntax is similar to doxygen's config file.
RTF_EXTENSIONS_FILE = RTF_EXTENSIONS_FILE =
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options related to the man page output # configuration options related to the man page output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_MAN tag is set to YES (the default) Doxygen will # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
# generate man pages # generate man pages
GENERATE_MAN = NO GENERATE_MAN = NO
# The MAN_OUTPUT tag is used to specify where the man pages will be put. # The MAN_OUTPUT tag is used to specify where the man pages will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be # If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `man' will be used as the default path. # put in front of it. If left blank `man' will be used as the default path.
MAN_OUTPUT = man MAN_OUTPUT = man
# The MAN_EXTENSION tag determines the extension that is added to # The MAN_EXTENSION tag determines the extension that is added to
# the generated man pages (default is the subroutine's section .3) # the generated man pages (default is the subroutine's section .3)
MAN_EXTENSION = .3 MAN_EXTENSION = .3
# If the MAN_LINKS tag is set to YES and Doxygen generates man output, # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
# then it will generate one additional man file for each entity # then it will generate one additional man file for each entity
# documented in the real man page(s). These additional files # documented in the real man page(s). These additional files
# only source the real man page, but without them the man command # only source the real man page, but without them the man command
# would be unable to find the correct page. The default is NO. # would be unable to find the correct page. The default is NO.
MAN_LINKS = NO MAN_LINKS = NO
...@@ -763,40 +1134,45 @@ MAN_LINKS = NO ...@@ -763,40 +1134,45 @@ MAN_LINKS = NO
# configuration options related to the XML output # configuration options related to the XML output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_XML tag is set to YES Doxygen will # If the GENERATE_XML tag is set to YES Doxygen will
# generate an XML file that captures the structure of # generate an XML file that captures the structure of
# the code including all documentation. Note that this # the code including all documentation.
# feature is still experimental and incomplete at the
# moment.
GENERATE_XML = NO GENERATE_XML = NO
# The XML_OUTPUT tag is used to specify where the XML pages will be put. # The XML_OUTPUT tag is used to specify where the XML pages will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be # If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `xml' will be used as the default path. # put in front of it. If left blank `xml' will be used as the default path.
XML_OUTPUT = xml XML_OUTPUT = xml
# The XML_SCHEMA tag can be used to specify an XML schema, # The XML_SCHEMA tag can be used to specify an XML schema,
# which can be used by a validating XML parser to check the # which can be used by a validating XML parser to check the
# syntax of the XML files. # syntax of the XML files.
XML_SCHEMA = XML_SCHEMA =
# The XML_DTD tag can be used to specify an XML DTD, # The XML_DTD tag can be used to specify an XML DTD,
# which can be used by a validating XML parser to check the # which can be used by a validating XML parser to check the
# syntax of the XML files. # syntax of the XML files.
XML_DTD = XML_DTD =
# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
# dump the program listings (including syntax highlighting
# and cross-referencing information) to the XML output. Note that
# enabling this will significantly increase the size of the XML output.
XML_PROGRAMLISTING = YES
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options for the AutoGen Definitions output # configuration options for the AutoGen Definitions output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
# generate an AutoGen Definitions (see autogen.sf.net) file # generate an AutoGen Definitions (see autogen.sf.net) file
# that captures the structure of the code including all # that captures the structure of the code including all
# documentation. Note that this feature is still experimental # documentation. Note that this feature is still experimental
# and incomplete at the moment. # and incomplete at the moment.
GENERATE_AUTOGEN_DEF = NO GENERATE_AUTOGEN_DEF = NO
...@@ -805,283 +1181,341 @@ GENERATE_AUTOGEN_DEF = NO ...@@ -805,283 +1181,341 @@ GENERATE_AUTOGEN_DEF = NO
# configuration options related to the Perl module output # configuration options related to the Perl module output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_PERLMOD tag is set to YES Doxygen will # If the GENERATE_PERLMOD tag is set to YES Doxygen will
# generate a Perl module file that captures the structure of # generate a Perl module file that captures the structure of
# the code including all documentation. Note that this # the code including all documentation. Note that this
# feature is still experimental and incomplete at the # feature is still experimental and incomplete at the
# moment. # moment.
GENERATE_PERLMOD = NO GENERATE_PERLMOD = NO
# If the PERLMOD_LATEX tag is set to YES Doxygen will generate # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
# the necessary Makefile rules, Perl scripts and LaTeX code to be able # the necessary Makefile rules, Perl scripts and LaTeX code to be able
# to generate PDF and DVI output from the Perl module output. # to generate PDF and DVI output from the Perl module output.
PERLMOD_LATEX = NO PERLMOD_LATEX = NO
# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
# nicely formatted so it can be parsed by a human reader. This is useful # nicely formatted so it can be parsed by a human reader.
# if you want to understand what is going on. On the other hand, if this # This is useful
# tag is set to NO the size of the Perl module output will be much smaller # if you want to understand what is going on.
# On the other hand, if this
# tag is set to NO the size of the Perl module output will be much smaller
# and Perl will parse it just the same. # and Perl will parse it just the same.
PERLMOD_PRETTY = YES PERLMOD_PRETTY = YES
# The names of the make variables in the generated doxyrules.make file # The names of the make variables in the generated doxyrules.make file
# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
# This is useful so different doxyrules.make files included by the same # This is useful so different doxyrules.make files included by the same
# Makefile don't overwrite each other's variables. # Makefile don't overwrite each other's variables.
PERLMOD_MAKEVAR_PREFIX = PERLMOD_MAKEVAR_PREFIX =
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# Configuration options related to the preprocessor # Configuration options related to the preprocessor
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
# evaluate all C-preprocessor directives found in the sources and include # evaluate all C-preprocessor directives found in the sources and include
# files. # files.
ENABLE_PREPROCESSING = YES ENABLE_PREPROCESSING = YES
# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
# names in the source code. If set to NO (the default) only conditional # names in the source code. If set to NO (the default) only conditional
# compilation will be performed. Macro expansion can be done in a controlled # compilation will be performed. Macro expansion can be done in a controlled
# way by setting EXPAND_ONLY_PREDEF to YES. # way by setting EXPAND_ONLY_PREDEF to YES.
MACRO_EXPANSION = YES MACRO_EXPANSION = YES
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
# then the macro expansion is limited to the macros specified with the # then the macro expansion is limited to the macros specified with the
# PREDEFINED and EXPAND_AS_PREDEFINED tags. # PREDEFINED and EXPAND_AS_DEFINED tags.
EXPAND_ONLY_PREDEF = NO EXPAND_ONLY_PREDEF = NO
# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
# in the INCLUDE_PATH (see below) will be search if a #include is found. # in the INCLUDE_PATH (see below) will be search if a #include is found.
SEARCH_INCLUDES = YES SEARCH_INCLUDES = YES
# The INCLUDE_PATH tag can be used to specify one or more directories that # The INCLUDE_PATH tag can be used to specify one or more directories that
# contain include files that are not input files but should be processed by # contain include files that are not input files but should be processed by
# the preprocessor. # the preprocessor.
INCLUDE_PATH = $(pwr_inc) INCLUDE_PATH = $(pwr_inc)
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
# patterns (like *.h and *.hpp) to filter out the header-files in the # patterns (like *.h and *.hpp) to filter out the header-files in the
# directories. If left blank, the patterns specified with FILE_PATTERNS will # directories. If left blank, the patterns specified with FILE_PATTERNS will
# be used. # be used.
INCLUDE_FILE_PATTERNS = INCLUDE_FILE_PATTERNS =
# The PREDEFINED tag can be used to specify one or more macro names that # The PREDEFINED tag can be used to specify one or more macro names that
# are defined before the preprocessor is started (similar to the -D option of # are defined before the preprocessor is started (similar to the -D option of
# gcc). The argument of the tag is a list of macros of the form: name # gcc). The argument of the tag is a list of macros of the form: name
# or name=definition (no spaces). If the definition and the = are # or name=definition (no spaces). If the definition and the = are
# omitted =1 is assumed. # omitted =1 is assumed. To prevent a macro definition from being
# undefined via #undef or recursively expanded use the := operator
# instead of the = operator.
PREDEFINED = OS_LINUX=1 \ PREDEFINED = OS_LINUX=1 \
OS=LINUX \ OS=LINUX \
__cplusplus=1 \ __cplusplus=1 \
__DOXYGEN=1 __DOXYGEN=1
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
# this tag can be used to specify a list of macro names that should be expanded. # this tag can be used to specify a list of macro names that should be expanded.
# The macro definition that is found in the sources will be used. # The macro definition that is found in the sources will be used.
# Use the PREDEFINED tag if you want to use a different macro definition. # Use the PREDEFINED tag if you want to use a different macro definition.
EXPAND_AS_DEFINED = EXPAND_AS_DEFINED =
# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
# doxygen's preprocessor will remove all function-like macros that are alone # doxygen's preprocessor will remove all function-like macros that are alone
# on a line, have an all uppercase name, and do not end with a semicolon. Such # on a line, have an all uppercase name, and do not end with a semicolon. Such
# function macros are typically used for boiler-plate code, and will confuse the # function macros are typically used for boiler-plate code, and will confuse
# parser if not removed. # the parser if not removed.
SKIP_FUNCTION_MACROS = YES SKIP_FUNCTION_MACROS = YES
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# Configuration::addtions related to external references # Configuration::additions related to external references
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# The TAGFILES option can be used to specify one or more tagfiles. # The TAGFILES option can be used to specify one or more tagfiles.
# Optionally an initial location of the external documentation # Optionally an initial location of the external documentation
# can be added for each tagfile. The format of a tag file without # can be added for each tagfile. The format of a tag file without
# this location is as follows: # this location is as follows:
# TAGFILES = file1 file2 ... #
# Adding location for the tag files is done as follows: # TAGFILES = file1 file2 ...
# TAGFILES = file1=loc1 "file2 = loc2" ... # Adding location for the tag files is done as follows:
# where "loc1" and "loc2" can be relative or absolute paths or #
# URLs. If a location is present for each tag, the installdox tool # TAGFILES = file1=loc1 "file2 = loc2" ...
# where "loc1" and "loc2" can be relative or absolute paths or
# URLs. If a location is present for each tag, the installdox tool
# does not have to be run to correct the links. # does not have to be run to correct the links.
# Note that each tag file must have a unique name # Note that each tag file must have a unique name
# (where the name does NOT include the path) # (where the name does NOT include the path)
# If a tag file is not located in the directory in which doxygen # If a tag file is not located in the directory in which doxygen
# is run, you must also specify the path to the tagfile here. # is run, you must also specify the path to the tagfile here.
TAGFILES = TAGFILES =
# When a file name is specified after GENERATE_TAGFILE, doxygen will create # When a file name is specified after GENERATE_TAGFILE, doxygen will create
# a tag file that is based on the input files it reads. # a tag file that is based on the input files it reads.
GENERATE_TAGFILE = GENERATE_TAGFILE =
# If the ALLEXTERNALS tag is set to YES all external classes will be listed # If the ALLEXTERNALS tag is set to YES all external classes will be listed
# in the class index. If set to NO only the inherited external classes # in the class index. If set to NO only the inherited external classes
# will be listed. # will be listed.
ALLEXTERNALS = NO ALLEXTERNALS = NO
# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
# in the modules index. If set to NO, only the current project's groups will # in the modules index. If set to NO, only the current project's groups will
# be listed. # be listed.
EXTERNAL_GROUPS = YES EXTERNAL_GROUPS = YES
# The PERL_PATH should be the absolute path and name of the perl script # The PERL_PATH should be the absolute path and name of the perl script
# interpreter (i.e. the result of `which perl'). # interpreter (i.e. the result of `which perl').
PERL_PATH = /usr/bin/perl PERL_PATH = /usr/bin/perl
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# Configuration options related to the dot tool # Configuration options related to the dot tool
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
# super classes. Setting the tag to NO turns the diagrams off. Note that this # or super classes. Setting the tag to NO turns the diagrams off. Note that
# option is superceded by the HAVE_DOT option below. This is only a fallback. It is # this option is superseded by the HAVE_DOT option below. This is only a
# recommended to install and use dot, since it yields more powerful graphs. # fallback. It is recommended to install and use dot, since it yields more
# powerful graphs.
CLASS_DIAGRAMS = YES CLASS_DIAGRAMS = YES
# If set to YES, the inheritance and collaboration graphs will hide # You can define message sequence charts within doxygen comments using the \msc
# inheritance and usage relations if the target is undocumented # command. Doxygen will then run the mscgen tool (see
# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
# documentation. The MSCGEN_PATH tag allows you to specify the directory where
# the mscgen tool resides. If left empty the tool is assumed to be found in the
# default search path.
MSCGEN_PATH =
# If set to YES, the inheritance and collaboration graphs will hide
# inheritance and usage relations if the target is undocumented
# or is not a class. # or is not a class.
HIDE_UNDOC_RELATIONS = YES HIDE_UNDOC_RELATIONS = YES
# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
# available from the path. This tool is part of Graphviz, a graph visualization # available from the path. This tool is part of Graphviz, a graph visualization
# toolkit from AT&T and Lucent Bell Labs. The other options in this section # toolkit from AT&T and Lucent Bell Labs. The other options in this section
# have no effect if this option is set to NO (the default) # have no effect if this option is set to NO (the default)
HAVE_DOT = NO HAVE_DOT = NO
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen # By default doxygen will write a font called FreeSans.ttf to the output
# will generate a graph for each documented class showing the direct and # directory and reference it in all dot files that doxygen generates. This
# indirect inheritance relations. Setting this tag to YES will force the # font does not include all possible unicode characters however, so when you need
# these (or just want a differently looking font) you can specify the font name
# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
# which can be done by putting it in a standard location or by setting the
# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
# containing the font.
DOT_FONTNAME = FreeSans
# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
# The default size is 10pt.
DOT_FONTSIZE = 10
# By default doxygen will tell dot to use the output directory to look for the
# FreeSans.ttf font (which doxygen will put there itself). If you specify a
# different font using DOT_FONTNAME you can set the path where dot
# can find it using this tag.
DOT_FONTPATH =
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
# will generate a graph for each documented class showing the direct and
# indirect inheritance relations. Setting this tag to YES will force the
# the CLASS_DIAGRAMS tag to NO. # the CLASS_DIAGRAMS tag to NO.
CLASS_GRAPH = YES CLASS_GRAPH = YES
# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
# will generate a graph for each documented class showing the direct and # will generate a graph for each documented class showing the direct and
# indirect implementation dependencies (inheritance, containment, and # indirect implementation dependencies (inheritance, containment, and
# class references variables) of the class with other documented classes. # class references variables) of the class with other documented classes.
COLLABORATION_GRAPH = YES COLLABORATION_GRAPH = YES
# If the UML_LOOK tag is set to YES doxygen will generate inheritance and # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
# collaboration diagrams in a style similiar to the OMG's Unified Modeling # will generate a graph for groups, showing the direct groups dependencies
GROUP_GRAPHS = YES
# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
# collaboration diagrams in a style similar to the OMG's Unified Modeling
# Language. # Language.
UML_LOOK = NO UML_LOOK = NO
# If set to YES, the inheritance and collaboration graphs will show the # If set to YES, the inheritance and collaboration graphs will show the
# relations between templates and their instances. # relations between templates and their instances.
TEMPLATE_RELATIONS = NO TEMPLATE_RELATIONS = NO
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
# tags are set to YES then doxygen will generate a graph for each documented # tags are set to YES then doxygen will generate a graph for each documented
# file showing the direct and indirect include dependencies of the file with # file showing the direct and indirect include dependencies of the file with
# other documented files. # other documented files.
INCLUDE_GRAPH = YES INCLUDE_GRAPH = YES
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
# HAVE_DOT tags are set to YES then doxygen will generate a graph for each # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
# documented header file showing the documented files that directly or # documented header file showing the documented files that directly or
# indirectly include this file. # indirectly include this file.
INCLUDED_BY_GRAPH = YES INCLUDED_BY_GRAPH = YES
# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will # If the CALL_GRAPH and HAVE_DOT options are set to YES then
# generate a call dependency graph for every global function or class method. # doxygen will generate a call dependency graph for every global function
# Note that enabling this option will significantly increase the time of a run. # or class method. Note that enabling this option will significantly increase
# So in most cases it will be better to enable call graphs for selected # the time of a run. So in most cases it will be better to enable call graphs
# functions only using the \callgraph command. # for selected functions only using the \callgraph command.
CALL_GRAPH = NO CALL_GRAPH = NO
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
# doxygen will generate a caller dependency graph for every global function
# or class method. Note that enabling this option will significantly increase
# the time of a run. So in most cases it will be better to enable caller
# graphs for selected functions only using the \callergraph command.
CALLER_GRAPH = NO
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
# will graphical hierarchy of all classes instead of a textual one. # will graphical hierarchy of all classes instead of a textual one.
GRAPHICAL_HIERARCHY = YES GRAPHICAL_HIERARCHY = YES
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
DIRECTORY_GRAPH = YES
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
# generated by dot. Possible values are png, jpg, or gif # generated by dot. Possible values are png, jpg, or gif
# If left blank png will be used. # If left blank png will be used.
DOT_IMAGE_FORMAT = png DOT_IMAGE_FORMAT = png
# The tag DOT_PATH can be used to specify the path where the dot tool can be # The tag DOT_PATH can be used to specify the path where the dot tool can be
# found. If left blank, it is assumed the dot tool can be found on the path. # found. If left blank, it is assumed the dot tool can be found in the path.
DOT_PATH = DOT_PATH =
# The DOTFILE_DIRS tag can be used to specify one or more directories that # The DOTFILE_DIRS tag can be used to specify one or more directories that
# contain dot files that are included in the documentation (see the # contain dot files that are included in the documentation (see the
# \dotfile command). # \dotfile command).
DOTFILE_DIRS = DOTFILE_DIRS =
# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
# (in pixels) of the graphs generated by dot. If a graph becomes larger than # nodes that will be shown in the graph. If the number of nodes in a graph
# this value, doxygen will try to truncate the graph, so that it fits within # becomes larger than this value, doxygen will truncate the graph, which is
# the specified constraint. Beware that most browsers cannot cope with very # visualized by representing a node as a red box. Note that doxygen if the
# large images. # number of direct children of the root node in a graph is already larger than
# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
MAX_DOT_GRAPH_WIDTH = 1024 DOT_GRAPH_MAX_NODES = 50
# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
# (in pixels) of the graphs generated by dot. If a graph becomes larger than # graphs generated by dot. A depth value of 3 means that only nodes reachable
# this value, doxygen will try to truncate the graph, so that it fits within # from the root by following a path via at most 3 edges will be shown. Nodes
# the specified constraint. Beware that most browsers cannot cope with very # that lay further from the root node will be omitted. Note that setting this
# large images. # option to 1 or 2 may greatly reduce the computation time needed for large
# code bases. Also note that the size of a graph can be further restricted by
# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
MAX_DOT_GRAPH_HEIGHT = 1024 MAX_DOT_GRAPH_DEPTH = 0
# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
# graphs generated by dot. A depth value of 3 means that only nodes reachable # background. This is disabled by default, because dot on Windows does not
# from the root by following a path via at most 3 edges will be shown. Nodes that # seem to support this out of the box. Warning: Depending on the platform used,
# lay further from the root node will be omitted. Note that setting this option to # enabling this option may lead to badly anti-aliased labels on the edges of
# 1 or 2 may greatly reduce the computation time needed for large code bases. Also # a graph (i.e. they become hard to read).
# note that a graph may be further truncated if the graph's image dimensions are
# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT).
# If 0 is used for the depth value (the default), the graph is not depth-constrained.
MAX_DOT_GRAPH_DEPTH = 0 DOT_TRANSPARENT = NO
# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
# generate a legend page explaining the meaning of the various boxes and # files in one run (i.e. multiple -o and -T options on the command line). This
# makes dot run faster, but since only newer versions of dot (>1.8.10)
# support this, this feature is disabled by default.
DOT_MULTI_TARGETS = YES
# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
# generate a legend page explaining the meaning of the various boxes and
# arrows in the dot generated graphs. # arrows in the dot generated graphs.
GENERATE_LEGEND = YES GENERATE_LEGEND = YES
# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
# remove the intermediate dot files that are used to generate # remove the intermediate dot files that are used to generate
# the various graphs. # the various graphs.
DOT_CLEANUP = YES DOT_CLEANUP = YES
#---------------------------------------------------------------------------
# Configuration::addtions related to the search engine
#---------------------------------------------------------------------------
# The SEARCHENGINE tag specifies whether or not a search engine should be
# used. If set to NO the values of all tags below this one will be ignored.
SEARCHENGINE = YES
...@@ -40,7 +40,7 @@ $(clean_html) : clean_%.html : %.html ...@@ -40,7 +40,7 @@ $(clean_html) : clean_%.html : %.html
$(doc_dir)/dox/index.html : ../../doxygen.dx $(doc_dir)/dox/index.html : ../../doxygen.dx
@ echo "doxygen documentation $(source) $(target)" @ echo "doxygen documentation $(source) $(target)"
@ doxygen @ doxygen 2> /dev/null
......
# Doxyfile 1.3.4 # Doxyfile 1.6.1
# This file describes the settings to be used by the documentation system # This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project # doxygen (www.doxygen.org) for a project
...@@ -14,430 +14,667 @@ ...@@ -14,430 +14,667 @@
# Project related configuration options # Project related configuration options
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded # This tag specifies the encoding used for all characters in the config file
# that follow. The default is UTF-8 which is also the encoding used for all
# text before the first occurrence of this tag. Doxygen uses libiconv (or the
# iconv built into libc) for the transcoding. See
# http://www.gnu.org/software/libiconv for the list of possible encodings.
DOXYFILE_ENCODING = UTF-8
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
# by quotes) that should identify the project. # by quotes) that should identify the project.
PROJECT_NAME = PwrSourceCode PROJECT_NAME = PwrSourceCode
# The PROJECT_NUMBER tag can be used to enter a project or revision number. # The PROJECT_NUMBER tag can be used to enter a project or revision number.
# This could be handy for archiving the generated documentation or # This could be handy for archiving the generated documentation or
# if some version control system is used. # if some version control system is used.
PROJECT_NUMBER = V4.1.0 PROJECT_NUMBER = V4.1.0
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
# base path where the generated documentation will be put. # base path where the generated documentation will be put.
# If a relative path is entered, it will be relative to the location # If a relative path is entered, it will be relative to the location
# where doxygen was started. If left blank the current directory will be used. # where doxygen was started. If left blank the current directory will be used.
OUTPUT_DIRECTORY = OUTPUT_DIRECTORY =
# The OUTPUT_LANGUAGE tag is used to specify the language in which all # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
# documentation generated by doxygen is written. Doxygen will use this # 4096 sub-directories (in 2 levels) under the output directory of each output
# information to generate all constant output in the proper language. # format and will distribute the generated files over these directories.
# The default language is English, other supported languages are: # Enabling this option can be useful when feeding doxygen a huge amount of
# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, # source files, where putting all generated files in the same directory would
# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en # otherwise cause performance problems for the file system.
# (Japanese with English messages), Korean, Norwegian, Polish, Portuguese,
# Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
OUTPUT_LANGUAGE = English CREATE_SUBDIRS = NO
# This tag can be used to specify the encoding used in the generated output. # The OUTPUT_LANGUAGE tag is used to specify the language in which all
# The encoding is not always determined by the language that is chosen, # documentation generated by doxygen is written. Doxygen will use this
# but also whether or not the output is meant for Windows or non-Windows users. # information to generate all constant output in the proper language.
# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES # The default language is English, other supported languages are:
# forces the Windows encoding (this is the default for the Windows binary), # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
# whereas setting the tag to NO uses a Unix-style encoding (the default for # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
# all platforms other than Windows). # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
USE_WINDOWS_ENCODING = NO OUTPUT_LANGUAGE = English
# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
# include brief member descriptions after the members that are listed in # include brief member descriptions after the members that are listed in
# the file and class documentation (similar to JavaDoc). # the file and class documentation (similar to JavaDoc).
# Set to NO to disable this. # Set to NO to disable this.
BRIEF_MEMBER_DESC = YES BRIEF_MEMBER_DESC = YES
# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
# the brief description of a member or function before the detailed description. # the brief description of a member or function before the detailed description.
# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
# brief descriptions will be completely suppressed. # brief descriptions will be completely suppressed.
REPEAT_BRIEF = YES REPEAT_BRIEF = YES
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then # This tag implements a quasi-intelligent brief description abbreviator
# Doxygen will generate a detailed section even if there is only a brief # that is used to form the text in various listings. Each string
# in this list, if found as the leading text of the brief description, will be
# stripped from the text and the result after processing the whole list, is
# used as the annotated text. Otherwise, the brief description is used as-is.
# If left blank, the following values are used ("$name" is automatically
# replaced with the name of the entity): "The $name class" "The $name widget"
# "The $name file" "is" "provides" "specifies" "contains"
# "represents" "a" "an" "the"
ABBREVIATE_BRIEF =
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
# Doxygen will generate a detailed section even if there is only a brief
# description. # description.
ALWAYS_DETAILED_SEC = NO ALWAYS_DETAILED_SEC = NO
# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
# members of a class in the documentation of that class as if those members were # inherited members of a class in the documentation of that class as if those
# ordinary class members. Constructors, destructors and assignment operators of # members were ordinary class members. Constructors, destructors and assignment
# the base classes will not be shown. # operators of the base classes will not be shown.
INLINE_INHERITED_MEMB = NO INLINE_INHERITED_MEMB = NO
# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
# path before files name in the file list and in the header files. If set # path before files name in the file list and in the header files. If set
# to NO the shortest path that makes the file name unique will be used. # to NO the shortest path that makes the file name unique will be used.
FULL_PATH_NAMES = NO FULL_PATH_NAMES = NO
# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
# can be used to strip a user-defined part of the path. Stripping is # can be used to strip a user-defined part of the path. Stripping is
# only done if one of the specified strings matches the left-hand part of # only done if one of the specified strings matches the left-hand part of
# the path. It is allowed to use relative paths in the argument list. # the path. The tag can be used to show relative paths in the file list.
# If left blank the directory from which doxygen is run is used as the
# path to strip.
STRIP_FROM_PATH =
STRIP_FROM_PATH = # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
# the path mentioned in the documentation of a class, which tells
# the reader which header file to include in order to use a class.
# If left blank only the name of the header file containing the class
# definition is used. Otherwise one should specify the include paths that
# are normally passed to the compiler using the -I flag.
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter STRIP_FROM_INC_PATH =
# (but less readable) file names. This can be useful is your file systems
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
# (but less readable) file names. This can be useful is your file systems
# doesn't support long names like on DOS, Mac, or CD-ROM. # doesn't support long names like on DOS, Mac, or CD-ROM.
SHORT_NAMES = NO SHORT_NAMES = NO
# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
# will interpret the first line (until the first dot) of a JavaDoc-style # will interpret the first line (until the first dot) of a JavaDoc-style
# comment as the brief description. If set to NO, the JavaDoc # comment as the brief description. If set to NO, the JavaDoc
# comments will behave just like the Qt-style comments (thus requiring an # comments will behave just like regular Qt-style comments
# explict @brief command for a brief description. # (thus requiring an explicit @brief command for a brief description.)
JAVADOC_AUTOBRIEF = NO JAVADOC_AUTOBRIEF = NO
# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen # If the QT_AUTOBRIEF tag is set to YES then Doxygen will
# treat a multi-line C++ special comment block (i.e. a block of //! or /// # interpret the first line (until the first dot) of a Qt-style
# comments) as a brief description. This used to be the default behaviour. # comment as the brief description. If set to NO, the comments
# The new default is to treat a multi-line C++ comment block as a detailed # will behave just like regular Qt-style comments (thus requiring
# description. Set this tag to YES if you prefer the old behaviour instead. # an explicit \brief command for a brief description.)
MULTILINE_CPP_IS_BRIEF = NO QT_AUTOBRIEF = NO
# If the DETAILS_AT_TOP tag is set to YES then Doxygen # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
# will output the detailed description near the top, like JavaDoc. # treat a multi-line C++ special comment block (i.e. a block of //! or ///
# If set to NO, the detailed description appears after the member # comments) as a brief description. This used to be the default behaviour.
# documentation. # The new default is to treat a multi-line C++ comment block as a detailed
# description. Set this tag to YES if you prefer the old behaviour instead.
DETAILS_AT_TOP = NO MULTILINE_CPP_IS_BRIEF = NO
# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
# member inherits the documentation from any documented member that it # member inherits the documentation from any documented member that it
# reimplements. # re-implements.
INHERIT_DOCS = YES INHERIT_DOCS = YES
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
# tag is set to YES, then doxygen will reuse the documentation of the first # a new page for each member. If set to NO, the documentation of a member will
# member in the group (if any) for the other members of the group. By default # be part of the file/class/namespace that contains it.
# all members of a group must be documented explicitly.
DISTRIBUTE_GROUP_DOC = NO SEPARATE_MEMBER_PAGES = NO
# The TAB_SIZE tag can be used to set the number of spaces in a tab. # The TAB_SIZE tag can be used to set the number of spaces in a tab.
# Doxygen uses this value to replace tabs by spaces in code fragments. # Doxygen uses this value to replace tabs by spaces in code fragments.
TAB_SIZE = 8 TAB_SIZE = 8
# This tag can be used to specify a number of aliases that acts # This tag can be used to specify a number of aliases that acts
# as commands in the documentation. An alias has the form "name=value". # as commands in the documentation. An alias has the form "name=value".
# For example adding "sideeffect=\par Side Effects:\n" will allow you to # For example adding "sideeffect=\par Side Effects:\n" will allow you to
# put the command \sideeffect (or @sideeffect) in the documentation, which # put the command \sideeffect (or @sideeffect) in the documentation, which
# will result in a user-defined paragraph with heading "Side Effects:". # will result in a user-defined paragraph with heading "Side Effects:".
# You can put \n's in the value part of an alias to insert newlines. # You can put \n's in the value part of an alias to insert newlines.
ALIASES = ALIASES =
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
# only. Doxygen will then generate output that is more tailored for C. # sources only. Doxygen will then generate output that is more tailored for C.
# For instance, some of the names that are used will be different. The list # For instance, some of the names that are used will be different. The list
# of all members will be omitted, etc. # of all members will be omitted, etc.
OPTIMIZE_OUTPUT_FOR_C = NO OPTIMIZE_OUTPUT_FOR_C = NO
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
# only. Doxygen will then generate output that is more tailored for Java. # sources only. Doxygen will then generate output that is more tailored for
# For instance, namespaces will be presented as packages, qualified scopes # Java. For instance, namespaces will be presented as packages, qualified
# will look different, etc. # scopes will look different, etc.
OPTIMIZE_OUTPUT_JAVA = NO OPTIMIZE_OUTPUT_JAVA = NO
# Set the SUBGROUPING tag to YES (the default) to allow class member groups of # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
# the same type (for instance a group of public functions) to be put as a # sources only. Doxygen will then generate output that is more tailored for
# subgroup of that type (e.g. under the Public Functions section). Set it to # Fortran.
# NO to prevent subgrouping. Alternatively, this can be done per class using
OPTIMIZE_FOR_FORTRAN = NO
# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
# sources. Doxygen will then generate output that is tailored for
# VHDL.
OPTIMIZE_OUTPUT_VHDL = NO
# Doxygen selects the parser to use depending on the extension of the files it parses.
# With this tag you can assign which parser to use for a given extension.
# Doxygen has a built-in mapping, but you can override or extend it using this tag.
# The format is ext=language, where ext is a file extension, and language is one of
# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
EXTENSION_MAPPING =
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
# to include (a tag file for) the STL sources as input, then you should
# set this tag to YES in order to let doxygen match functions declarations and
# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
# func(std::string) {}). This also make the inheritance and collaboration
# diagrams that involve STL classes more complete and accurate.
BUILTIN_STL_SUPPORT = NO
# If you use Microsoft's C++/CLI language, you should set this option to YES to
# enable parsing support.
CPP_CLI_SUPPORT = NO
# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
# Doxygen will parse them like normal C++ but will assume all classes use public
# instead of private inheritance when no explicit protection keyword is present.
SIP_SUPPORT = NO
# For Microsoft's IDL there are propget and propput attributes to indicate getter
# and setter methods for a property. Setting this option to YES (the default)
# will make doxygen to replace the get and set methods by a property in the
# documentation. This will only work if the methods are indeed getting or
# setting a simple type. If this is not the case, or you want to show the
# methods anyway, you should set this option to NO.
IDL_PROPERTY_SUPPORT = YES
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
# tag is set to YES, then doxygen will reuse the documentation of the first
# member in the group (if any) for the other members of the group. By default
# all members of a group must be documented explicitly.
DISTRIBUTE_GROUP_DOC = NO
# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
# the same type (for instance a group of public functions) to be put as a
# subgroup of that type (e.g. under the Public Functions section). Set it to
# NO to prevent subgrouping. Alternatively, this can be done per class using
# the \nosubgrouping command. # the \nosubgrouping command.
SUBGROUPING = YES SUBGROUPING = YES
# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
# is documented as struct, union, or enum with the name of the typedef. So
# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
# with name TypeT. When disabled the typedef will appear as a member of a file,
# namespace, or class. And the struct will be named TypeS. This can typically
# be useful for C code in case the coding convention dictates that all compound
# types are typedef'ed and only the typedef is referenced, never the tag name.
TYPEDEF_HIDES_STRUCT = NO
# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
# determine which symbols to keep in memory and which to flush to disk.
# When the cache is full, less often used symbols will be written to disk.
# For small to medium size projects (<1000 input files) the default value is
# probably good enough. For larger projects a too small cache size can cause
# doxygen to be busy swapping symbols to and from disk most of the time
# causing a significant performance penality.
# If the system has enough physical memory increasing the cache will improve the
# performance by keeping more symbols in memory. Note that the value works on
# a logarithmic scale so increasing the size by one will rougly double the
# memory usage. The cache size is given by this formula:
# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
# corresponding to a cache size of 2^16 = 65536 symbols
SYMBOL_CACHE_SIZE = 0
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# Build related configuration options # Build related configuration options
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
# documentation are documented, even if no documentation was available. # documentation are documented, even if no documentation was available.
# Private class members and static file members will be hidden unless # Private class members and static file members will be hidden unless
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
EXTRACT_ALL = YES EXTRACT_ALL = YES
# If the EXTRACT_PRIVATE tag is set to YES all private members of a class # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
# will be included in the documentation. # will be included in the documentation.
EXTRACT_PRIVATE = YES EXTRACT_PRIVATE = YES
# If the EXTRACT_STATIC tag is set to YES all static members of a file # If the EXTRACT_STATIC tag is set to YES all static members of a file
# will be included in the documentation. # will be included in the documentation.
EXTRACT_STATIC = YES EXTRACT_STATIC = YES
# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
# defined locally in source files will be included in the documentation. # defined locally in source files will be included in the documentation.
# If set to NO only classes defined in header files are included. # If set to NO only classes defined in header files are included.
EXTRACT_LOCAL_CLASSES = YES EXTRACT_LOCAL_CLASSES = YES
# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all # This flag is only useful for Objective-C code. When set to YES local
# undocumented members of documented classes, files or namespaces. # methods, which are defined in the implementation section but not in
# If set to NO (the default) these members will be included in the # the interface are included in the documentation.
# various overviews, but no documentation section is generated. # If set to NO (the default) only methods in the interface are included.
EXTRACT_LOCAL_METHODS = NO
# If this flag is set to YES, the members of anonymous namespaces will be
# extracted and appear in the documentation as a namespace called
# 'anonymous_namespace{file}', where file will be replaced with the base
# name of the file that contains the anonymous namespace. By default
# anonymous namespace are hidden.
EXTRACT_ANON_NSPACES = NO
# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
# undocumented members of documented classes, files or namespaces.
# If set to NO (the default) these members will be included in the
# various overviews, but no documentation section is generated.
# This option has no effect if EXTRACT_ALL is enabled. # This option has no effect if EXTRACT_ALL is enabled.
HIDE_UNDOC_MEMBERS = YES HIDE_UNDOC_MEMBERS = YES
# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
# undocumented classes that are normally visible in the class hierarchy. # undocumented classes that are normally visible in the class hierarchy.
# If set to NO (the default) these classes will be included in the various # If set to NO (the default) these classes will be included in the various
# overviews. This option has no effect if EXTRACT_ALL is enabled. # overviews. This option has no effect if EXTRACT_ALL is enabled.
HIDE_UNDOC_CLASSES = YES HIDE_UNDOC_CLASSES = YES
# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
# friend (class|struct|union) declarations. # friend (class|struct|union) declarations.
# If set to NO (the default) these declarations will be included in the # If set to NO (the default) these declarations will be included in the
# documentation. # documentation.
HIDE_FRIEND_COMPOUNDS = NO HIDE_FRIEND_COMPOUNDS = NO
# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
# documentation blocks found inside the body of a function. # documentation blocks found inside the body of a function.
# If set to NO (the default) these blocks will be appended to the # If set to NO (the default) these blocks will be appended to the
# function's detailed documentation block. # function's detailed documentation block.
HIDE_IN_BODY_DOCS = NO HIDE_IN_BODY_DOCS = NO
# The INTERNAL_DOCS tag determines if documentation # The INTERNAL_DOCS tag determines if documentation
# that is typed after a \internal command is included. If the tag is set # that is typed after a \internal command is included. If the tag is set
# to NO (the default) then the documentation will be excluded. # to NO (the default) then the documentation will be excluded.
# Set it to YES to include the internal documentation. # Set it to YES to include the internal documentation.
INTERNAL_DOCS = NO INTERNAL_DOCS = NO
# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
# file names in lower-case letters. If set to YES upper-case letters are also # file names in lower-case letters. If set to YES upper-case letters are also
# allowed. This is useful if you have classes or files whose names only differ # allowed. This is useful if you have classes or files whose names only differ
# in case and if your file system supports case sensitive file names. Windows # in case and if your file system supports case sensitive file names. Windows
# users are advised to set this option to NO. # and Mac users are advised to set this option to NO.
CASE_SENSE_NAMES = YES CASE_SENSE_NAMES = YES
# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
# will show members with their full class and namespace scopes in the # will show members with their full class and namespace scopes in the
# documentation. If set to YES the scope will be hidden. # documentation. If set to YES the scope will be hidden.
HIDE_SCOPE_NAMES = NO HIDE_SCOPE_NAMES = NO
# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
# will put a list of the files that are included by a file in the documentation # will put a list of the files that are included by a file in the documentation
# of that file. # of that file.
SHOW_INCLUDE_FILES = YES SHOW_INCLUDE_FILES = YES
# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
# is inserted in the documentation for inline members. # is inserted in the documentation for inline members.
INLINE_INFO = YES INLINE_INFO = YES
# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
# will sort the (detailed) documentation of file and class members # will sort the (detailed) documentation of file and class members
# alphabetically by member name. If set to NO the members will appear in # alphabetically by member name. If set to NO the members will appear in
# declaration order. # declaration order.
SORT_MEMBER_DOCS = YES SORT_MEMBER_DOCS = YES
# The GENERATE_TODOLIST tag can be used to enable (YES) or # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
# disable (NO) the todo list. This list is created by putting \todo # brief documentation of file, namespace and class members alphabetically
# by member name. If set to NO (the default) the members will appear in
# declaration order.
SORT_BRIEF_DOCS = NO
# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
SORT_MEMBERS_CTORS_1ST = NO
# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
# hierarchy of group names into alphabetical order. If set to NO (the default)
# the group names will appear in their defined order.
SORT_GROUP_NAMES = NO
# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
# sorted by fully-qualified names, including namespaces. If set to
# NO (the default), the class list will be sorted only by class name,
# not including the namespace part.
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
# Note: This option applies only to the class list, not to the
# alphabetical list.
SORT_BY_SCOPE_NAME = NO
# The GENERATE_TODOLIST tag can be used to enable (YES) or
# disable (NO) the todo list. This list is created by putting \todo
# commands in the documentation. # commands in the documentation.
GENERATE_TODOLIST = YES GENERATE_TODOLIST = YES
# The GENERATE_TESTLIST tag can be used to enable (YES) or # The GENERATE_TESTLIST tag can be used to enable (YES) or
# disable (NO) the test list. This list is created by putting \test # disable (NO) the test list. This list is created by putting \test
# commands in the documentation. # commands in the documentation.
GENERATE_TESTLIST = YES GENERATE_TESTLIST = YES
# The GENERATE_BUGLIST tag can be used to enable (YES) or # The GENERATE_BUGLIST tag can be used to enable (YES) or
# disable (NO) the bug list. This list is created by putting \bug # disable (NO) the bug list. This list is created by putting \bug
# commands in the documentation. # commands in the documentation.
GENERATE_BUGLIST = YES GENERATE_BUGLIST = YES
# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
# disable (NO) the deprecated list. This list is created by putting # disable (NO) the deprecated list. This list is created by putting
# \deprecated commands in the documentation. # \deprecated commands in the documentation.
GENERATE_DEPRECATEDLIST= YES GENERATE_DEPRECATEDLIST= YES
# The ENABLED_SECTIONS tag can be used to enable conditional # The ENABLED_SECTIONS tag can be used to enable conditional
# documentation sections, marked by \if sectionname ... \endif. # documentation sections, marked by \if sectionname ... \endif.
ENABLED_SECTIONS = ENABLED_SECTIONS =
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
# the initial value of a variable or define consists of for it to appear in # the initial value of a variable or define consists of for it to appear in
# the documentation. If the initializer consists of more lines than specified # the documentation. If the initializer consists of more lines than specified
# here it will be hidden. Use a value of 0 to hide initializers completely. # here it will be hidden. Use a value of 0 to hide initializers completely.
# The appearance of the initializer of individual variables and defines in the # The appearance of the initializer of individual variables and defines in the
# documentation can be controlled using \showinitializer or \hideinitializer # documentation can be controlled using \showinitializer or \hideinitializer
# command in the documentation regardless of this setting. # command in the documentation regardless of this setting.
MAX_INITIALIZER_LINES = 30 MAX_INITIALIZER_LINES = 30
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
# at the bottom of the documentation of classes and structs. If set to YES the # at the bottom of the documentation of classes and structs. If set to YES the
# list will mention the files that were used to generate the documentation. # list will mention the files that were used to generate the documentation.
SHOW_USED_FILES = YES SHOW_USED_FILES = YES
# If the sources in your project are distributed over multiple directories
# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
# in the documentation. The default is NO.
SHOW_DIRECTORIES = NO
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
SHOW_FILES = YES
# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
# Namespaces page.
# This will remove the Namespaces entry from the Quick Index
# and from the Folder Tree View (if specified). The default is YES.
SHOW_NAMESPACES = YES
# The FILE_VERSION_FILTER tag can be used to specify a program or script that
# doxygen should invoke to get the current version for each file (typically from
# the version control system). Doxygen will invoke the program by executing (via
# popen()) the command <command> <input-file>, where <command> is the value of
# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
# provided by doxygen. Whatever the program writes to standard output
# is used as the file version. See the manual for examples.
FILE_VERSION_FILTER =
# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
# doxygen. The layout file controls the global structure of the generated output files
# in an output format independent way. The create the layout file that represents
# doxygen's defaults, run doxygen with the -l option. You can optionally specify a
# file name after the option, if omitted DoxygenLayout.xml will be used as the name
# of the layout file.
LAYOUT_FILE =
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options related to warning and progress messages # configuration options related to warning and progress messages
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# The QUIET tag can be used to turn on/off the messages that are generated # The QUIET tag can be used to turn on/off the messages that are generated
# by doxygen. Possible values are YES and NO. If left blank NO is used. # by doxygen. Possible values are YES and NO. If left blank NO is used.
QUIET = YES QUIET = YES
# The WARNINGS tag can be used to turn on/off the warning messages that are # The WARNINGS tag can be used to turn on/off the warning messages that are
# generated by doxygen. Possible values are YES and NO. If left blank # generated by doxygen. Possible values are YES and NO. If left blank
# NO is used. # NO is used.
WARNINGS = YES WARNINGS = YES
# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
# for undocumented members. If EXTRACT_ALL is set to YES then this flag will # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
# automatically be disabled. # automatically be disabled.
WARN_IF_UNDOCUMENTED = YES WARN_IF_UNDOCUMENTED = YES
# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
# potential errors in the documentation, such as not documenting some # potential errors in the documentation, such as not documenting some
# parameters in a documented function, or documenting parameters that # parameters in a documented function, or documenting parameters that
# don't exist or using markup commands wrongly. # don't exist or using markup commands wrongly.
WARN_IF_DOC_ERROR = YES WARN_IF_DOC_ERROR = YES
# The WARN_FORMAT tag determines the format of the warning messages that # This WARN_NO_PARAMDOC option can be abled to get warnings for
# doxygen can produce. The string should contain the $file, $line, and $text # functions that are documented, but have no documentation for their parameters
# tags, which will be replaced by the file and line number from which the # or return value. If set to NO (the default) doxygen will only warn about
# warning originated and the warning text. # wrong or incomplete parameter documentation, but not about the absence of
# documentation.
WARN_NO_PARAMDOC = NO
# The WARN_FORMAT tag determines the format of the warning messages that
# doxygen can produce. The string should contain the $file, $line, and $text
# tags, which will be replaced by the file and line number from which the
# warning originated and the warning text. Optionally the format may contain
# $version, which will be replaced by the version of the file (if it could
# be obtained via FILE_VERSION_FILTER)
WARN_FORMAT = "$file:$line: $text" WARN_FORMAT = "$file:$line: $text"
# The WARN_LOGFILE tag can be used to specify a file to which warning # The WARN_LOGFILE tag can be used to specify a file to which warning
# and error messages should be written. If left blank the output is written # and error messages should be written. If left blank the output is written
# to stderr. # to stderr.
WARN_LOGFILE = WARN_LOGFILE =
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options related to the input files # configuration options related to the input files
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# The INPUT tag can be used to specify the files and/or directories that contain # The INPUT tag can be used to specify the files and/or directories that contain
# documented source files. You may enter file names like "myfile.cpp" or # documented source files. You may enter file names like "myfile.cpp" or
# directories like "/usr/src/myproject". Separate the files or directories # directories like "/usr/src/myproject". Separate the files or directories
# with spaces. # with spaces.
INPUT = $(pwre_croot)/src/doc/dox/src/doxygen.dx \ INPUT = $(pwre_croot)/src/doc/dox/src/doxygen.dx \
$(pwre_croot)/src/exp/inc/src \ $(pwre_croot)/src/exp/inc/src \
$(pwre_croot)/xtt/lib/glow/src \
$(pwre_croot)/xtt/lib/ge/src \
$(pwre_croot)/src/lib/rt/src $(pwre_croot)/src/lib/rt/src
# If the value of the INPUT tag contains directories, you can use the # This tag can be used to specify the character encoding of the source files
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
# and *.h) to filter out the source-files in the directories. If left # also the default input encoding. Doxygen uses libiconv (or the iconv built
# blank the following patterns are tested: # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp # the list of possible encodings.
# *.h++ *.idl *.odl *.cs *.php *.php3 *.inc
INPUT_ENCODING = UTF-8
# If the value of the INPUT tag contains directories, you can use the
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
# and *.h) to filter out the source-files in the directories. If left
# blank the following patterns are tested:
# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
FILE_PATTERNS = *.cpp \ FILE_PATTERNS = *.cpp \
*.c \ *.c \
*.h *.h
# The RECURSIVE tag can be used to turn specify whether or not subdirectories # The RECURSIVE tag can be used to turn specify whether or not subdirectories
# should be searched for input files as well. Possible values are YES and NO. # should be searched for input files as well. Possible values are YES and NO.
# If left blank NO is used. # If left blank NO is used.
RECURSIVE = YES RECURSIVE = YES
# The EXCLUDE tag can be used to specify files and/or directories that should # The EXCLUDE tag can be used to specify files and/or directories that should
# excluded from the INPUT source files. This way you can easily exclude a # excluded from the INPUT source files. This way you can easily exclude a
# subdirectory from a directory tree whose root is specified with the INPUT tag. # subdirectory from a directory tree whose root is specified with the INPUT tag.
EXCLUDE = EXCLUDE =
# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories # The EXCLUDE_SYMLINKS tag can be used select whether or not files or
# that are symbolic links (a Unix filesystem feature) are excluded from the input. # directories that are symbolic links (a Unix filesystem feature) are excluded
# from the input.
EXCLUDE_SYMLINKS = NO EXCLUDE_SYMLINKS = NO
# If the value of the INPUT tag contains directories, you can use the # If the value of the INPUT tag contains directories, you can use the
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
# certain files from those directories. # certain files from those directories. Note that the wildcards are matched
# against the file with absolute path, so to exclude all test directories
# for example use the pattern */test/*
EXCLUDE_PATTERNS = *_bitmap_*.h EXCLUDE_PATTERNS = *_bitmap_*.h
# The EXAMPLE_PATH tag can be used to specify one or more files or # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
# directories that contain example code fragments that are included (see # (namespaces, classes, functions, etc.) that should be excluded from the
# output. The symbol name can be a fully qualified name, a word, or if the
# wildcard * is used, a substring. Examples: ANamespace, AClass,
# AClass::ANamespace, ANamespace::*Test
EXCLUDE_SYMBOLS =
# The EXAMPLE_PATH tag can be used to specify one or more files or
# directories that contain example code fragments that are included (see
# the \include command). # the \include command).
EXAMPLE_PATH = EXAMPLE_PATH =
# If the value of the EXAMPLE_PATH tag contains directories, you can use the # If the value of the EXAMPLE_PATH tag contains directories, you can use the
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
# and *.h) to filter out the source-files in the directories. If left # and *.h) to filter out the source-files in the directories. If left
# blank all files are included. # blank all files are included.
EXAMPLE_PATTERNS = EXAMPLE_PATTERNS =
# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
# searched for input files to be used with the \include or \dontinclude # searched for input files to be used with the \include or \dontinclude
# commands irrespective of the value of the RECURSIVE tag. # commands irrespective of the value of the RECURSIVE tag.
# Possible values are YES and NO. If left blank NO is used. # Possible values are YES and NO. If left blank NO is used.
EXAMPLE_RECURSIVE = NO EXAMPLE_RECURSIVE = NO
# The IMAGE_PATH tag can be used to specify one or more files or # The IMAGE_PATH tag can be used to specify one or more files or
# directories that contain image that are included in the documentation (see # directories that contain image that are included in the documentation (see
# the \image command). # the \image command).
IMAGE_PATH = IMAGE_PATH =
# The INPUT_FILTER tag can be used to specify a program that doxygen should # The INPUT_FILTER tag can be used to specify a program that doxygen should
# invoke to filter for each input file. Doxygen will invoke the filter program # invoke to filter for each input file. Doxygen will invoke the filter program
# by executing (via popen()) the command <filter> <input-file>, where <filter> # by executing (via popen()) the command <filter> <input-file>, where <filter>
# is the value of the INPUT_FILTER tag, and <input-file> is the name of an # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
# input file. Doxygen will then use the output that the filter program writes # input file. Doxygen will then use the output that the filter program writes
# to standard output. # to standard output.
# If FILTER_PATTERNS is specified, this tag will be
# ignored.
INPUT_FILTER =
INPUT_FILTER = # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
# basis.
# Doxygen will compare the file name with each pattern and apply the
# filter if there is a match.
# The filters are a list of the form:
# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
# is applied to all files.
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using FILTER_PATTERNS =
# INPUT_FILTER) will be used to filter the input files when producing source
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
# INPUT_FILTER) will be used to filter the input files when producing source
# files to browse (i.e. when SOURCE_BROWSER is set to YES). # files to browse (i.e. when SOURCE_BROWSER is set to YES).
FILTER_SOURCE_FILES = NO FILTER_SOURCE_FILES = NO
...@@ -446,36 +683,54 @@ FILTER_SOURCE_FILES = NO ...@@ -446,36 +683,54 @@ FILTER_SOURCE_FILES = NO
# configuration options related to source browsing # configuration options related to source browsing
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the SOURCE_BROWSER tag is set to YES then a list of source files will # If the SOURCE_BROWSER tag is set to YES then a list of source files will
# be generated. Documented entities will be cross-referenced with these sources. # be generated. Documented entities will be cross-referenced with these sources.
# Note: To get rid of all source code in the generated output, make sure also
# VERBATIM_HEADERS is set to NO.
SOURCE_BROWSER = YES SOURCE_BROWSER = YES
# Setting the INLINE_SOURCES tag to YES will include the body # Setting the INLINE_SOURCES tag to YES will include the body
# of functions and classes directly in the documentation. # of functions and classes directly in the documentation.
INLINE_SOURCES = NO INLINE_SOURCES = NO
# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
# doxygen to hide any special comment blocks from generated source code # doxygen to hide any special comment blocks from generated source code
# fragments. Normal C and C++ comments will always remain visible. # fragments. Normal C and C++ comments will always remain visible.
STRIP_CODE_COMMENTS = YES STRIP_CODE_COMMENTS = YES
# If the REFERENCED_BY_RELATION tag is set to YES (the default) # If the REFERENCED_BY_RELATION tag is set to YES
# then for each documented function all documented # then for each documented function all documented
# functions referencing it will be listed. # functions referencing it will be listed.
REFERENCED_BY_RELATION = YES REFERENCED_BY_RELATION = YES
# If the REFERENCES_RELATION tag is set to YES (the default) # If the REFERENCES_RELATION tag is set to YES
# then for each documented function all documented entities # then for each documented function all documented entities
# called/used by that function will be listed. # called/used by that function will be listed.
REFERENCES_RELATION = YES REFERENCES_RELATION = YES
# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
# will generate a verbatim copy of the header file for each class for # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
# link to the source code.
# Otherwise they will link to the documentation.
REFERENCES_LINK_SOURCE = YES
# If the USE_HTAGS tag is set to YES then the references to source code
# will point to the HTML generated by the htags(1) tool instead of doxygen
# built-in source browser. The htags tool is part of GNU's global source
# tagging system (see http://www.gnu.org/software/global/global.html). You
# will need version 4.8.6 or higher.
USE_HTAGS = NO
# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
# will generate a verbatim copy of the header file for each class for
# which an include is specified. Set to NO to disable this. # which an include is specified. Set to NO to disable this.
VERBATIM_HEADERS = YES VERBATIM_HEADERS = YES
...@@ -484,277 +739,393 @@ VERBATIM_HEADERS = YES ...@@ -484,277 +739,393 @@ VERBATIM_HEADERS = YES
# configuration options related to the alphabetical class index # configuration options related to the alphabetical class index
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
# of all compounds will be generated. Enable this if the project # of all compounds will be generated. Enable this if the project
# contains a lot of classes, structs, unions or interfaces. # contains a lot of classes, structs, unions or interfaces.
ALPHABETICAL_INDEX = YES ALPHABETICAL_INDEX = YES
# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
# in which this list will be split (can be a number in the range [1..20]) # in which this list will be split (can be a number in the range [1..20])
COLS_IN_ALPHA_INDEX = 3 COLS_IN_ALPHA_INDEX = 3
# In case all classes in a project start with a common prefix, all # In case all classes in a project start with a common prefix, all
# classes will be put under the same header in the alphabetical index. # classes will be put under the same header in the alphabetical index.
# The IGNORE_PREFIX tag can be used to specify one or more prefixes that # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
# should be ignored while generating the index headers. # should be ignored while generating the index headers.
IGNORE_PREFIX = IGNORE_PREFIX =
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options related to the HTML output # configuration options related to the HTML output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_HTML tag is set to YES (the default) Doxygen will # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
# generate HTML output. # generate HTML output.
GENERATE_HTML = YES GENERATE_HTML = YES
# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be # If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `html' will be used as the default path. # put in front of it. If left blank `html' will be used as the default path.
HTML_OUTPUT = $(pwr_doc)/dox HTML_OUTPUT = $(pwr_doc)/dox
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
# each generated HTML page (for example: .htm,.php,.asp). If it is left blank # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
# doxygen will generate files with .html extension. # doxygen will generate files with .html extension.
HTML_FILE_EXTENSION = .html HTML_FILE_EXTENSION = .html
# The HTML_HEADER tag can be used to specify a personal HTML header for # The HTML_HEADER tag can be used to specify a personal HTML header for
# each generated HTML page. If it is left blank doxygen will generate a # each generated HTML page. If it is left blank doxygen will generate a
# standard header. # standard header.
HTML_HEADER = HTML_HEADER =
# The HTML_FOOTER tag can be used to specify a personal HTML footer for # The HTML_FOOTER tag can be used to specify a personal HTML footer for
# each generated HTML page. If it is left blank doxygen will generate a # each generated HTML page. If it is left blank doxygen will generate a
# standard footer. # standard footer.
HTML_FOOTER = HTML_FOOTER =
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
# style sheet that is used by each HTML page. It can be used to # style sheet that is used by each HTML page. It can be used to
# fine-tune the look of the HTML output. If the tag is left blank doxygen # fine-tune the look of the HTML output. If the tag is left blank doxygen
# will generate a default style sheet # will generate a default style sheet. Note that doxygen will try to copy
# the style sheet file to the HTML output directory, so don't put your own
# stylesheet in the HTML output directory as well, or it will be erased!
HTML_STYLESHEET = HTML_STYLESHEET =
# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
# files or namespaces will be aligned in HTML using tables. If set to # files or namespaces will be aligned in HTML using tables. If set to
# NO a bullet list will be used. # NO a bullet list will be used.
HTML_ALIGN_MEMBERS = YES HTML_ALIGN_MEMBERS = YES
# If the GENERATE_HTMLHELP tag is set to YES, additional index files # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# will be generated that can be used as input for tools like the # documentation will contain sections that can be hidden and shown after the
# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) # page has loaded. For this to work a browser that supports
# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
HTML_DYNAMIC_SECTIONS = NO
# If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard).
# To create a documentation set, doxygen will generate a Makefile in the
# HTML output directory. Running make will produce the docset in that
# directory and running "make install" will install the docset in
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
# it at startup.
# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
GENERATE_DOCSET = NO
# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
# feed. A documentation feed provides an umbrella under which multiple
# documentation sets from a single provider (such as a company or product suite)
# can be grouped.
DOCSET_FEEDNAME = "Doxygen generated docs"
# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
# should uniquely identify the documentation set bundle. This should be a
# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
# will append .docset to the name.
DOCSET_BUNDLE_ID = org.doxygen.Project
# If the GENERATE_HTMLHELP tag is set to YES, additional index files
# will be generated that can be used as input for tools like the
# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
# of the generated HTML documentation. # of the generated HTML documentation.
GENERATE_HTMLHELP = NO GENERATE_HTMLHELP = NO
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
# be used to specify the file name of the resulting .chm file. You # be used to specify the file name of the resulting .chm file. You
# can add a path in front of the file if the result should not be # can add a path in front of the file if the result should not be
# written to the html output dir. # written to the html output directory.
CHM_FILE = CHM_FILE =
# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
# be used to specify the location (absolute path including file name) of # be used to specify the location (absolute path including file name) of
# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
# the HTML help compiler on the generated index.hhp. # the HTML help compiler on the generated index.hhp.
HHC_LOCATION = HHC_LOCATION =
# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
# controls if a separate .chi index file is generated (YES) or that # controls if a separate .chi index file is generated (YES) or that
# it should be included in the master .chm file (NO). # it should be included in the master .chm file (NO).
GENERATE_CHI = NO GENERATE_CHI = NO
# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag # If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
# controls whether a binary table of contents is generated (YES) or a # is used to encode HtmlHelp index (hhk), content (hhc) and project file
# content.
CHM_INDEX_ENCODING =
# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
# controls whether a binary table of contents is generated (YES) or a
# normal table of contents (NO) in the .chm file. # normal table of contents (NO) in the .chm file.
BINARY_TOC = NO BINARY_TOC = NO
# The TOC_EXPAND flag can be set to YES to add extra items for group members # The TOC_EXPAND flag can be set to YES to add extra items for group members
# to the contents of the HTML help documentation and to the tree view. # to the contents of the HTML help documentation and to the tree view.
TOC_EXPAND = NO TOC_EXPAND = NO
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
# top of each HTML page. The value NO (the default) enables the index and # are set, an additional index file will be generated that can be used as input for
# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
# HTML documentation.
GENERATE_QHP = NO
# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
# be used to specify the file name of the resulting .qch file.
# The path specified is relative to the HTML output folder.
QCH_FILE =
# The QHP_NAMESPACE tag specifies the namespace to use when generating
# Qt Help Project output. For more information please see
# http://doc.trolltech.com/qthelpproject.html#namespace
QHP_NAMESPACE =
# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
# Qt Help Project output. For more information please see
# http://doc.trolltech.com/qthelpproject.html#virtual-folders
QHP_VIRTUAL_FOLDER = doc
# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
# For more information please see
# http://doc.trolltech.com/qthelpproject.html#custom-filters
QHP_CUST_FILTER_NAME =
# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
QHP_CUST_FILTER_ATTRS =
# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's
# filter section matches.
# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
QHP_SECT_FILTER_ATTRS =
# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
# be used to specify the location of Qt's qhelpgenerator.
# If non-empty doxygen will try to run qhelpgenerator on the generated
# .qhp file.
QHG_LOCATION =
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
# top of each HTML page. The value NO (the default) enables the index and
# the value YES disables it. # the value YES disables it.
DISABLE_INDEX = NO DISABLE_INDEX = NO
# This tag can be used to set the number of enum values (range [1..20]) # This tag can be used to set the number of enum values (range [1..20])
# that doxygen will group on one line in the generated HTML documentation. # that doxygen will group on one line in the generated HTML documentation.
ENUM_VALUES_PER_LINE = 4 ENUM_VALUES_PER_LINE = 4
# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# generated containing a tree-like index structure (just like the one that # structure should be generated to display hierarchical information.
# is generated for HTML Help). For this to work a browser that supports # If the tag value is set to YES, a side panel will be generated
# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, # containing a tree-like index structure (just like the one that
# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are # is generated for HTML Help). For this to work a browser that supports
# probably better off using the HTML help feature. # JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
# Windows users are probably better off using the HTML help feature.
GENERATE_TREEVIEW = NO GENERATE_TREEVIEW = NO
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
# used to set the initial width (in pixels) of the frame in which the tree # and Class Hierarchy pages using a tree view instead of an ordered list.
USE_INLINE_TREES = NO
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown. # is shown.
TREEVIEW_WIDTH = 250 TREEVIEW_WIDTH = 250
# Use this tag to change the font size of Latex formulas included
# as images in the HTML documentation. The default is 10. Note that
# when you change the font size after a successful doxygen run you need
# to manually remove any form_*.png images from the HTML output directory
# to force them to be regenerated.
FORMULA_FONTSIZE = 10
# When the SEARCHENGINE tag is enable doxygen will generate a search box for the HTML output. The underlying search engine uses javascript
# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP) or Qt help (GENERATE_QHP)
# there is already a search function so this one should typically
# be disabled.
SEARCHENGINE = YES
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options related to the LaTeX output # configuration options related to the LaTeX output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
# generate Latex output. # generate Latex output.
GENERATE_LATEX = NO GENERATE_LATEX = NO
# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be # If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `latex' will be used as the default path. # put in front of it. If left blank `latex' will be used as the default path.
LATEX_OUTPUT = latex LATEX_OUTPUT = latex
# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
# invoked. If left blank `latex' will be used as the default command name. # invoked. If left blank `latex' will be used as the default command name.
LATEX_CMD_NAME = latex LATEX_CMD_NAME = latex
# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
# generate index for LaTeX. If left blank `makeindex' will be used as the # generate index for LaTeX. If left blank `makeindex' will be used as the
# default command name. # default command name.
MAKEINDEX_CMD_NAME = makeindex MAKEINDEX_CMD_NAME = makeindex
# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
# LaTeX documents. This may be useful for small projects and may help to # LaTeX documents. This may be useful for small projects and may help to
# save some trees in general. # save some trees in general.
COMPACT_LATEX = NO COMPACT_LATEX = NO
# The PAPER_TYPE tag can be used to set the paper type that is used # The PAPER_TYPE tag can be used to set the paper type that is used
# by the printer. Possible values are: a4, a4wide, letter, legal and # by the printer. Possible values are: a4, a4wide, letter, legal and
# executive. If left blank a4wide will be used. # executive. If left blank a4wide will be used.
PAPER_TYPE = a4wide PAPER_TYPE = a4wide
# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
# packages that should be included in the LaTeX output. # packages that should be included in the LaTeX output.
EXTRA_PACKAGES = EXTRA_PACKAGES =
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
# the generated latex document. The header should contain everything until # the generated latex document. The header should contain everything until
# the first chapter. If it is left blank doxygen will generate a # the first chapter. If it is left blank doxygen will generate a
# standard header. Notice: only use this tag if you know what you are doing! # standard header. Notice: only use this tag if you know what you are doing!
LATEX_HEADER = LATEX_HEADER =
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
# is prepared for conversion to pdf (using ps2pdf). The pdf file will # is prepared for conversion to pdf (using ps2pdf). The pdf file will
# contain links (just like the HTML output) instead of page references # contain links (just like the HTML output) instead of page references
# This makes the output suitable for online browsing using a pdf viewer. # This makes the output suitable for online browsing using a pdf viewer.
PDF_HYPERLINKS = NO PDF_HYPERLINKS = NO
# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
# plain latex in the generated Makefile. Set this option to YES to get a # plain latex in the generated Makefile. Set this option to YES to get a
# higher quality PDF documentation. # higher quality PDF documentation.
USE_PDFLATEX = NO USE_PDFLATEX = NO
# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
# command to the generated LaTeX files. This will instruct LaTeX to keep # command to the generated LaTeX files. This will instruct LaTeX to keep
# running if errors occur, instead of asking the user for help. # running if errors occur, instead of asking the user for help.
# This option is also used when generating formulas in HTML. # This option is also used when generating formulas in HTML.
LATEX_BATCHMODE = NO LATEX_BATCHMODE = NO
# If LATEX_HIDE_INDICES is set to YES then doxygen will not # If LATEX_HIDE_INDICES is set to YES then doxygen will not
# include the index chapters (such as File Index, Compound Index, etc.) # include the index chapters (such as File Index, Compound Index, etc.)
# in the output. # in the output.
LATEX_HIDE_INDICES = NO LATEX_HIDE_INDICES = NO
# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.
LATEX_SOURCE_CODE = NO
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options related to the RTF output # configuration options related to the RTF output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
# The RTF output is optimised for Word 97 and may not look very pretty with # The RTF output is optimized for Word 97 and may not look very pretty with
# other RTF readers or editors. # other RTF readers or editors.
GENERATE_RTF = NO GENERATE_RTF = NO
# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be # If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `rtf' will be used as the default path. # put in front of it. If left blank `rtf' will be used as the default path.
RTF_OUTPUT = rtf RTF_OUTPUT = rtf
# If the COMPACT_RTF tag is set to YES Doxygen generates more compact # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
# RTF documents. This may be useful for small projects and may help to # RTF documents. This may be useful for small projects and may help to
# save some trees in general. # save some trees in general.
COMPACT_RTF = NO COMPACT_RTF = NO
# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
# will contain hyperlink fields. The RTF file will # will contain hyperlink fields. The RTF file will
# contain links (just like the HTML output) instead of page references. # contain links (just like the HTML output) instead of page references.
# This makes the output suitable for online browsing using WORD or other # This makes the output suitable for online browsing using WORD or other
# programs which support those fields. # programs which support those fields.
# Note: wordpad (write) and others do not support links. # Note: wordpad (write) and others do not support links.
RTF_HYPERLINKS = NO RTF_HYPERLINKS = NO
# Load stylesheet definitions from file. Syntax is similar to doxygen's # Load stylesheet definitions from file. Syntax is similar to doxygen's
# config file, i.e. a series of assigments. You only have to provide # config file, i.e. a series of assignments. You only have to provide
# replacements, missing definitions are set to their default value. # replacements, missing definitions are set to their default value.
RTF_STYLESHEET_FILE = RTF_STYLESHEET_FILE =
# Set optional variables used in the generation of an rtf document. # Set optional variables used in the generation of an rtf document.
# Syntax is similar to doxygen's config file. # Syntax is similar to doxygen's config file.
RTF_EXTENSIONS_FILE = RTF_EXTENSIONS_FILE =
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options related to the man page output # configuration options related to the man page output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_MAN tag is set to YES (the default) Doxygen will # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
# generate man pages # generate man pages
GENERATE_MAN = NO GENERATE_MAN = NO
# The MAN_OUTPUT tag is used to specify where the man pages will be put. # The MAN_OUTPUT tag is used to specify where the man pages will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be # If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `man' will be used as the default path. # put in front of it. If left blank `man' will be used as the default path.
MAN_OUTPUT = man MAN_OUTPUT = man
# The MAN_EXTENSION tag determines the extension that is added to # The MAN_EXTENSION tag determines the extension that is added to
# the generated man pages (default is the subroutine's section .3) # the generated man pages (default is the subroutine's section .3)
MAN_EXTENSION = .3 MAN_EXTENSION = .3
# If the MAN_LINKS tag is set to YES and Doxygen generates man output, # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
# then it will generate one additional man file for each entity # then it will generate one additional man file for each entity
# documented in the real man page(s). These additional files # documented in the real man page(s). These additional files
# only source the real man page, but without them the man command # only source the real man page, but without them the man command
# would be unable to find the correct page. The default is NO. # would be unable to find the correct page. The default is NO.
MAN_LINKS = NO MAN_LINKS = NO
...@@ -763,40 +1134,45 @@ MAN_LINKS = NO ...@@ -763,40 +1134,45 @@ MAN_LINKS = NO
# configuration options related to the XML output # configuration options related to the XML output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_XML tag is set to YES Doxygen will # If the GENERATE_XML tag is set to YES Doxygen will
# generate an XML file that captures the structure of # generate an XML file that captures the structure of
# the code including all documentation. Note that this # the code including all documentation.
# feature is still experimental and incomplete at the
# moment.
GENERATE_XML = NO GENERATE_XML = NO
# The XML_OUTPUT tag is used to specify where the XML pages will be put. # The XML_OUTPUT tag is used to specify where the XML pages will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be # If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `xml' will be used as the default path. # put in front of it. If left blank `xml' will be used as the default path.
XML_OUTPUT = xml XML_OUTPUT = xml
# The XML_SCHEMA tag can be used to specify an XML schema, # The XML_SCHEMA tag can be used to specify an XML schema,
# which can be used by a validating XML parser to check the # which can be used by a validating XML parser to check the
# syntax of the XML files. # syntax of the XML files.
XML_SCHEMA = XML_SCHEMA =
# The XML_DTD tag can be used to specify an XML DTD, # The XML_DTD tag can be used to specify an XML DTD,
# which can be used by a validating XML parser to check the # which can be used by a validating XML parser to check the
# syntax of the XML files. # syntax of the XML files.
XML_DTD = XML_DTD =
# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
# dump the program listings (including syntax highlighting
# and cross-referencing information) to the XML output. Note that
# enabling this will significantly increase the size of the XML output.
XML_PROGRAMLISTING = YES
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options for the AutoGen Definitions output # configuration options for the AutoGen Definitions output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
# generate an AutoGen Definitions (see autogen.sf.net) file # generate an AutoGen Definitions (see autogen.sf.net) file
# that captures the structure of the code including all # that captures the structure of the code including all
# documentation. Note that this feature is still experimental # documentation. Note that this feature is still experimental
# and incomplete at the moment. # and incomplete at the moment.
GENERATE_AUTOGEN_DEF = NO GENERATE_AUTOGEN_DEF = NO
...@@ -805,283 +1181,341 @@ GENERATE_AUTOGEN_DEF = NO ...@@ -805,283 +1181,341 @@ GENERATE_AUTOGEN_DEF = NO
# configuration options related to the Perl module output # configuration options related to the Perl module output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_PERLMOD tag is set to YES Doxygen will # If the GENERATE_PERLMOD tag is set to YES Doxygen will
# generate a Perl module file that captures the structure of # generate a Perl module file that captures the structure of
# the code including all documentation. Note that this # the code including all documentation. Note that this
# feature is still experimental and incomplete at the # feature is still experimental and incomplete at the
# moment. # moment.
GENERATE_PERLMOD = NO GENERATE_PERLMOD = NO
# If the PERLMOD_LATEX tag is set to YES Doxygen will generate # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
# the necessary Makefile rules, Perl scripts and LaTeX code to be able # the necessary Makefile rules, Perl scripts and LaTeX code to be able
# to generate PDF and DVI output from the Perl module output. # to generate PDF and DVI output from the Perl module output.
PERLMOD_LATEX = NO PERLMOD_LATEX = NO
# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
# nicely formatted so it can be parsed by a human reader. This is useful # nicely formatted so it can be parsed by a human reader.
# if you want to understand what is going on. On the other hand, if this # This is useful
# tag is set to NO the size of the Perl module output will be much smaller # if you want to understand what is going on.
# On the other hand, if this
# tag is set to NO the size of the Perl module output will be much smaller
# and Perl will parse it just the same. # and Perl will parse it just the same.
PERLMOD_PRETTY = YES PERLMOD_PRETTY = YES
# The names of the make variables in the generated doxyrules.make file # The names of the make variables in the generated doxyrules.make file
# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
# This is useful so different doxyrules.make files included by the same # This is useful so different doxyrules.make files included by the same
# Makefile don't overwrite each other's variables. # Makefile don't overwrite each other's variables.
PERLMOD_MAKEVAR_PREFIX = PERLMOD_MAKEVAR_PREFIX =
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# Configuration options related to the preprocessor # Configuration options related to the preprocessor
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
# evaluate all C-preprocessor directives found in the sources and include # evaluate all C-preprocessor directives found in the sources and include
# files. # files.
ENABLE_PREPROCESSING = YES ENABLE_PREPROCESSING = YES
# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
# names in the source code. If set to NO (the default) only conditional # names in the source code. If set to NO (the default) only conditional
# compilation will be performed. Macro expansion can be done in a controlled # compilation will be performed. Macro expansion can be done in a controlled
# way by setting EXPAND_ONLY_PREDEF to YES. # way by setting EXPAND_ONLY_PREDEF to YES.
MACRO_EXPANSION = YES MACRO_EXPANSION = YES
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
# then the macro expansion is limited to the macros specified with the # then the macro expansion is limited to the macros specified with the
# PREDEFINED and EXPAND_AS_PREDEFINED tags. # PREDEFINED and EXPAND_AS_DEFINED tags.
EXPAND_ONLY_PREDEF = NO EXPAND_ONLY_PREDEF = NO
# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
# in the INCLUDE_PATH (see below) will be search if a #include is found. # in the INCLUDE_PATH (see below) will be search if a #include is found.
SEARCH_INCLUDES = YES SEARCH_INCLUDES = YES
# The INCLUDE_PATH tag can be used to specify one or more directories that # The INCLUDE_PATH tag can be used to specify one or more directories that
# contain include files that are not input files but should be processed by # contain include files that are not input files but should be processed by
# the preprocessor. # the preprocessor.
INCLUDE_PATH = $(pwr_inc) INCLUDE_PATH = $(pwr_inc)
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
# patterns (like *.h and *.hpp) to filter out the header-files in the # patterns (like *.h and *.hpp) to filter out the header-files in the
# directories. If left blank, the patterns specified with FILE_PATTERNS will # directories. If left blank, the patterns specified with FILE_PATTERNS will
# be used. # be used.
INCLUDE_FILE_PATTERNS = INCLUDE_FILE_PATTERNS =
# The PREDEFINED tag can be used to specify one or more macro names that # The PREDEFINED tag can be used to specify one or more macro names that
# are defined before the preprocessor is started (similar to the -D option of # are defined before the preprocessor is started (similar to the -D option of
# gcc). The argument of the tag is a list of macros of the form: name # gcc). The argument of the tag is a list of macros of the form: name
# or name=definition (no spaces). If the definition and the = are # or name=definition (no spaces). If the definition and the = are
# omitted =1 is assumed. # omitted =1 is assumed. To prevent a macro definition from being
# undefined via #undef or recursively expanded use the := operator
# instead of the = operator.
PREDEFINED = OS_LINUX=1 \ PREDEFINED = OS_LINUX=1 \
OS=LINUX \ OS=LINUX \
__cplusplus=1 \ __cplusplus=1 \
__DOXYGEN=1 __DOXYGEN=1
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
# this tag can be used to specify a list of macro names that should be expanded. # this tag can be used to specify a list of macro names that should be expanded.
# The macro definition that is found in the sources will be used. # The macro definition that is found in the sources will be used.
# Use the PREDEFINED tag if you want to use a different macro definition. # Use the PREDEFINED tag if you want to use a different macro definition.
EXPAND_AS_DEFINED = EXPAND_AS_DEFINED =
# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
# doxygen's preprocessor will remove all function-like macros that are alone # doxygen's preprocessor will remove all function-like macros that are alone
# on a line, have an all uppercase name, and do not end with a semicolon. Such # on a line, have an all uppercase name, and do not end with a semicolon. Such
# function macros are typically used for boiler-plate code, and will confuse the # function macros are typically used for boiler-plate code, and will confuse
# parser if not removed. # the parser if not removed.
SKIP_FUNCTION_MACROS = YES SKIP_FUNCTION_MACROS = YES
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# Configuration::addtions related to external references # Configuration::additions related to external references
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# The TAGFILES option can be used to specify one or more tagfiles. # The TAGFILES option can be used to specify one or more tagfiles.
# Optionally an initial location of the external documentation # Optionally an initial location of the external documentation
# can be added for each tagfile. The format of a tag file without # can be added for each tagfile. The format of a tag file without
# this location is as follows: # this location is as follows:
# TAGFILES = file1 file2 ... #
# Adding location for the tag files is done as follows: # TAGFILES = file1 file2 ...
# TAGFILES = file1=loc1 "file2 = loc2" ... # Adding location for the tag files is done as follows:
# where "loc1" and "loc2" can be relative or absolute paths or #
# URLs. If a location is present for each tag, the installdox tool # TAGFILES = file1=loc1 "file2 = loc2" ...
# where "loc1" and "loc2" can be relative or absolute paths or
# URLs. If a location is present for each tag, the installdox tool
# does not have to be run to correct the links. # does not have to be run to correct the links.
# Note that each tag file must have a unique name # Note that each tag file must have a unique name
# (where the name does NOT include the path) # (where the name does NOT include the path)
# If a tag file is not located in the directory in which doxygen # If a tag file is not located in the directory in which doxygen
# is run, you must also specify the path to the tagfile here. # is run, you must also specify the path to the tagfile here.
TAGFILES = TAGFILES =
# When a file name is specified after GENERATE_TAGFILE, doxygen will create # When a file name is specified after GENERATE_TAGFILE, doxygen will create
# a tag file that is based on the input files it reads. # a tag file that is based on the input files it reads.
GENERATE_TAGFILE = GENERATE_TAGFILE =
# If the ALLEXTERNALS tag is set to YES all external classes will be listed # If the ALLEXTERNALS tag is set to YES all external classes will be listed
# in the class index. If set to NO only the inherited external classes # in the class index. If set to NO only the inherited external classes
# will be listed. # will be listed.
ALLEXTERNALS = NO ALLEXTERNALS = NO
# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
# in the modules index. If set to NO, only the current project's groups will # in the modules index. If set to NO, only the current project's groups will
# be listed. # be listed.
EXTERNAL_GROUPS = YES EXTERNAL_GROUPS = YES
# The PERL_PATH should be the absolute path and name of the perl script # The PERL_PATH should be the absolute path and name of the perl script
# interpreter (i.e. the result of `which perl'). # interpreter (i.e. the result of `which perl').
PERL_PATH = /usr/bin/perl PERL_PATH = /usr/bin/perl
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# Configuration options related to the dot tool # Configuration options related to the dot tool
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
# super classes. Setting the tag to NO turns the diagrams off. Note that this # or super classes. Setting the tag to NO turns the diagrams off. Note that
# option is superceded by the HAVE_DOT option below. This is only a fallback. It is # this option is superseded by the HAVE_DOT option below. This is only a
# recommended to install and use dot, since it yields more powerful graphs. # fallback. It is recommended to install and use dot, since it yields more
# powerful graphs.
CLASS_DIAGRAMS = YES CLASS_DIAGRAMS = YES
# If set to YES, the inheritance and collaboration graphs will hide # You can define message sequence charts within doxygen comments using the \msc
# inheritance and usage relations if the target is undocumented # command. Doxygen will then run the mscgen tool (see
# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
# documentation. The MSCGEN_PATH tag allows you to specify the directory where
# the mscgen tool resides. If left empty the tool is assumed to be found in the
# default search path.
MSCGEN_PATH =
# If set to YES, the inheritance and collaboration graphs will hide
# inheritance and usage relations if the target is undocumented
# or is not a class. # or is not a class.
HIDE_UNDOC_RELATIONS = YES HIDE_UNDOC_RELATIONS = YES
# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
# available from the path. This tool is part of Graphviz, a graph visualization # available from the path. This tool is part of Graphviz, a graph visualization
# toolkit from AT&T and Lucent Bell Labs. The other options in this section # toolkit from AT&T and Lucent Bell Labs. The other options in this section
# have no effect if this option is set to NO (the default) # have no effect if this option is set to NO (the default)
HAVE_DOT = NO HAVE_DOT = NO
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen # By default doxygen will write a font called FreeSans.ttf to the output
# will generate a graph for each documented class showing the direct and # directory and reference it in all dot files that doxygen generates. This
# indirect inheritance relations. Setting this tag to YES will force the # font does not include all possible unicode characters however, so when you need
# these (or just want a differently looking font) you can specify the font name
# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
# which can be done by putting it in a standard location or by setting the
# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
# containing the font.
DOT_FONTNAME = FreeSans
# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
# The default size is 10pt.
DOT_FONTSIZE = 10
# By default doxygen will tell dot to use the output directory to look for the
# FreeSans.ttf font (which doxygen will put there itself). If you specify a
# different font using DOT_FONTNAME you can set the path where dot
# can find it using this tag.
DOT_FONTPATH =
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
# will generate a graph for each documented class showing the direct and
# indirect inheritance relations. Setting this tag to YES will force the
# the CLASS_DIAGRAMS tag to NO. # the CLASS_DIAGRAMS tag to NO.
CLASS_GRAPH = YES CLASS_GRAPH = YES
# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
# will generate a graph for each documented class showing the direct and # will generate a graph for each documented class showing the direct and
# indirect implementation dependencies (inheritance, containment, and # indirect implementation dependencies (inheritance, containment, and
# class references variables) of the class with other documented classes. # class references variables) of the class with other documented classes.
COLLABORATION_GRAPH = YES COLLABORATION_GRAPH = YES
# If the UML_LOOK tag is set to YES doxygen will generate inheritance and # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
# collaboration diagrams in a style similiar to the OMG's Unified Modeling # will generate a graph for groups, showing the direct groups dependencies
GROUP_GRAPHS = YES
# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
# collaboration diagrams in a style similar to the OMG's Unified Modeling
# Language. # Language.
UML_LOOK = NO UML_LOOK = NO
# If set to YES, the inheritance and collaboration graphs will show the # If set to YES, the inheritance and collaboration graphs will show the
# relations between templates and their instances. # relations between templates and their instances.
TEMPLATE_RELATIONS = NO TEMPLATE_RELATIONS = NO
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
# tags are set to YES then doxygen will generate a graph for each documented # tags are set to YES then doxygen will generate a graph for each documented
# file showing the direct and indirect include dependencies of the file with # file showing the direct and indirect include dependencies of the file with
# other documented files. # other documented files.
INCLUDE_GRAPH = YES INCLUDE_GRAPH = YES
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
# HAVE_DOT tags are set to YES then doxygen will generate a graph for each # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
# documented header file showing the documented files that directly or # documented header file showing the documented files that directly or
# indirectly include this file. # indirectly include this file.
INCLUDED_BY_GRAPH = YES INCLUDED_BY_GRAPH = YES
# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will # If the CALL_GRAPH and HAVE_DOT options are set to YES then
# generate a call dependency graph for every global function or class method. # doxygen will generate a call dependency graph for every global function
# Note that enabling this option will significantly increase the time of a run. # or class method. Note that enabling this option will significantly increase
# So in most cases it will be better to enable call graphs for selected # the time of a run. So in most cases it will be better to enable call graphs
# functions only using the \callgraph command. # for selected functions only using the \callgraph command.
CALL_GRAPH = NO CALL_GRAPH = NO
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
# doxygen will generate a caller dependency graph for every global function
# or class method. Note that enabling this option will significantly increase
# the time of a run. So in most cases it will be better to enable caller
# graphs for selected functions only using the \callergraph command.
CALLER_GRAPH = NO
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
# will graphical hierarchy of all classes instead of a textual one. # will graphical hierarchy of all classes instead of a textual one.
GRAPHICAL_HIERARCHY = YES GRAPHICAL_HIERARCHY = YES
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
DIRECTORY_GRAPH = YES
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
# generated by dot. Possible values are png, jpg, or gif # generated by dot. Possible values are png, jpg, or gif
# If left blank png will be used. # If left blank png will be used.
DOT_IMAGE_FORMAT = png DOT_IMAGE_FORMAT = png
# The tag DOT_PATH can be used to specify the path where the dot tool can be # The tag DOT_PATH can be used to specify the path where the dot tool can be
# found. If left blank, it is assumed the dot tool can be found on the path. # found. If left blank, it is assumed the dot tool can be found in the path.
DOT_PATH = DOT_PATH =
# The DOTFILE_DIRS tag can be used to specify one or more directories that # The DOTFILE_DIRS tag can be used to specify one or more directories that
# contain dot files that are included in the documentation (see the # contain dot files that are included in the documentation (see the
# \dotfile command). # \dotfile command).
DOTFILE_DIRS = DOTFILE_DIRS =
# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
# (in pixels) of the graphs generated by dot. If a graph becomes larger than # nodes that will be shown in the graph. If the number of nodes in a graph
# this value, doxygen will try to truncate the graph, so that it fits within # becomes larger than this value, doxygen will truncate the graph, which is
# the specified constraint. Beware that most browsers cannot cope with very # visualized by representing a node as a red box. Note that doxygen if the
# large images. # number of direct children of the root node in a graph is already larger than
# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
MAX_DOT_GRAPH_WIDTH = 1024 DOT_GRAPH_MAX_NODES = 50
# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
# (in pixels) of the graphs generated by dot. If a graph becomes larger than # graphs generated by dot. A depth value of 3 means that only nodes reachable
# this value, doxygen will try to truncate the graph, so that it fits within # from the root by following a path via at most 3 edges will be shown. Nodes
# the specified constraint. Beware that most browsers cannot cope with very # that lay further from the root node will be omitted. Note that setting this
# large images. # option to 1 or 2 may greatly reduce the computation time needed for large
# code bases. Also note that the size of a graph can be further restricted by
# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
MAX_DOT_GRAPH_HEIGHT = 1024 MAX_DOT_GRAPH_DEPTH = 0
# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
# graphs generated by dot. A depth value of 3 means that only nodes reachable # background. This is disabled by default, because dot on Windows does not
# from the root by following a path via at most 3 edges will be shown. Nodes that # seem to support this out of the box. Warning: Depending on the platform used,
# lay further from the root node will be omitted. Note that setting this option to # enabling this option may lead to badly anti-aliased labels on the edges of
# 1 or 2 may greatly reduce the computation time needed for large code bases. Also # a graph (i.e. they become hard to read).
# note that a graph may be further truncated if the graph's image dimensions are
# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT).
# If 0 is used for the depth value (the default), the graph is not depth-constrained.
MAX_DOT_GRAPH_DEPTH = 0 DOT_TRANSPARENT = NO
# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
# generate a legend page explaining the meaning of the various boxes and # files in one run (i.e. multiple -o and -T options on the command line). This
# makes dot run faster, but since only newer versions of dot (>1.8.10)
# support this, this feature is disabled by default.
DOT_MULTI_TARGETS = YES
# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
# generate a legend page explaining the meaning of the various boxes and
# arrows in the dot generated graphs. # arrows in the dot generated graphs.
GENERATE_LEGEND = YES GENERATE_LEGEND = YES
# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
# remove the intermediate dot files that are used to generate # remove the intermediate dot files that are used to generate
# the various graphs. # the various graphs.
DOT_CLEANUP = YES DOT_CLEANUP = YES
#---------------------------------------------------------------------------
# Configuration::addtions related to the search engine
#---------------------------------------------------------------------------
# The SEARCHENGINE tag specifies whether or not a search engine should be
# used. If set to NO the values of all tags below this one will be ignored.
SEARCHENGINE = YES
...@@ -40,7 +40,7 @@ $(clean_html) : clean_%.html : %.html ...@@ -40,7 +40,7 @@ $(clean_html) : clean_%.html : %.html
$(doc_dir)/dox/index.html : ../../doxygen.dx $(doc_dir)/dox/index.html : ../../doxygen.dx
@ echo "doxygen documentation $(source) $(target)" @ echo "doxygen documentation $(source) $(target)"
@ doxygen @ doxygen 2> /dev/null
......
# Doxyfile 1.3.4 # Doxyfile 1.6.1
# This file describes the settings to be used by the documentation system # This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project # doxygen (www.doxygen.org) for a project
...@@ -14,430 +14,667 @@ ...@@ -14,430 +14,667 @@
# Project related configuration options # Project related configuration options
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded # This tag specifies the encoding used for all characters in the config file
# that follow. The default is UTF-8 which is also the encoding used for all
# text before the first occurrence of this tag. Doxygen uses libiconv (or the
# iconv built into libc) for the transcoding. See
# http://www.gnu.org/software/libiconv for the list of possible encodings.
DOXYFILE_ENCODING = UTF-8
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
# by quotes) that should identify the project. # by quotes) that should identify the project.
PROJECT_NAME = PwrSourceCode PROJECT_NAME = PwrSourceCode
# The PROJECT_NUMBER tag can be used to enter a project or revision number. # The PROJECT_NUMBER tag can be used to enter a project or revision number.
# This could be handy for archiving the generated documentation or # This could be handy for archiving the generated documentation or
# if some version control system is used. # if some version control system is used.
PROJECT_NUMBER = V4.1.0 PROJECT_NUMBER = V4.1.0
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
# base path where the generated documentation will be put. # base path where the generated documentation will be put.
# If a relative path is entered, it will be relative to the location # If a relative path is entered, it will be relative to the location
# where doxygen was started. If left blank the current directory will be used. # where doxygen was started. If left blank the current directory will be used.
OUTPUT_DIRECTORY = OUTPUT_DIRECTORY =
# The OUTPUT_LANGUAGE tag is used to specify the language in which all # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
# documentation generated by doxygen is written. Doxygen will use this # 4096 sub-directories (in 2 levels) under the output directory of each output
# information to generate all constant output in the proper language. # format and will distribute the generated files over these directories.
# The default language is English, other supported languages are: # Enabling this option can be useful when feeding doxygen a huge amount of
# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, # source files, where putting all generated files in the same directory would
# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en # otherwise cause performance problems for the file system.
# (Japanese with English messages), Korean, Norwegian, Polish, Portuguese,
# Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
OUTPUT_LANGUAGE = English CREATE_SUBDIRS = NO
# This tag can be used to specify the encoding used in the generated output. # The OUTPUT_LANGUAGE tag is used to specify the language in which all
# The encoding is not always determined by the language that is chosen, # documentation generated by doxygen is written. Doxygen will use this
# but also whether or not the output is meant for Windows or non-Windows users. # information to generate all constant output in the proper language.
# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES # The default language is English, other supported languages are:
# forces the Windows encoding (this is the default for the Windows binary), # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
# whereas setting the tag to NO uses a Unix-style encoding (the default for # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
# all platforms other than Windows). # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
USE_WINDOWS_ENCODING = NO OUTPUT_LANGUAGE = English
# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
# include brief member descriptions after the members that are listed in # include brief member descriptions after the members that are listed in
# the file and class documentation (similar to JavaDoc). # the file and class documentation (similar to JavaDoc).
# Set to NO to disable this. # Set to NO to disable this.
BRIEF_MEMBER_DESC = YES BRIEF_MEMBER_DESC = YES
# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
# the brief description of a member or function before the detailed description. # the brief description of a member or function before the detailed description.
# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
# brief descriptions will be completely suppressed. # brief descriptions will be completely suppressed.
REPEAT_BRIEF = YES REPEAT_BRIEF = YES
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then # This tag implements a quasi-intelligent brief description abbreviator
# Doxygen will generate a detailed section even if there is only a brief # that is used to form the text in various listings. Each string
# in this list, if found as the leading text of the brief description, will be
# stripped from the text and the result after processing the whole list, is
# used as the annotated text. Otherwise, the brief description is used as-is.
# If left blank, the following values are used ("$name" is automatically
# replaced with the name of the entity): "The $name class" "The $name widget"
# "The $name file" "is" "provides" "specifies" "contains"
# "represents" "a" "an" "the"
ABBREVIATE_BRIEF =
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
# Doxygen will generate a detailed section even if there is only a brief
# description. # description.
ALWAYS_DETAILED_SEC = NO ALWAYS_DETAILED_SEC = NO
# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
# members of a class in the documentation of that class as if those members were # inherited members of a class in the documentation of that class as if those
# ordinary class members. Constructors, destructors and assignment operators of # members were ordinary class members. Constructors, destructors and assignment
# the base classes will not be shown. # operators of the base classes will not be shown.
INLINE_INHERITED_MEMB = NO INLINE_INHERITED_MEMB = NO
# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
# path before files name in the file list and in the header files. If set # path before files name in the file list and in the header files. If set
# to NO the shortest path that makes the file name unique will be used. # to NO the shortest path that makes the file name unique will be used.
FULL_PATH_NAMES = NO FULL_PATH_NAMES = NO
# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
# can be used to strip a user-defined part of the path. Stripping is # can be used to strip a user-defined part of the path. Stripping is
# only done if one of the specified strings matches the left-hand part of # only done if one of the specified strings matches the left-hand part of
# the path. It is allowed to use relative paths in the argument list. # the path. The tag can be used to show relative paths in the file list.
# If left blank the directory from which doxygen is run is used as the
# path to strip.
STRIP_FROM_PATH =
STRIP_FROM_PATH = # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
# the path mentioned in the documentation of a class, which tells
# the reader which header file to include in order to use a class.
# If left blank only the name of the header file containing the class
# definition is used. Otherwise one should specify the include paths that
# are normally passed to the compiler using the -I flag.
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter STRIP_FROM_INC_PATH =
# (but less readable) file names. This can be useful is your file systems
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
# (but less readable) file names. This can be useful is your file systems
# doesn't support long names like on DOS, Mac, or CD-ROM. # doesn't support long names like on DOS, Mac, or CD-ROM.
SHORT_NAMES = NO SHORT_NAMES = NO
# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
# will interpret the first line (until the first dot) of a JavaDoc-style # will interpret the first line (until the first dot) of a JavaDoc-style
# comment as the brief description. If set to NO, the JavaDoc # comment as the brief description. If set to NO, the JavaDoc
# comments will behave just like the Qt-style comments (thus requiring an # comments will behave just like regular Qt-style comments
# explict @brief command for a brief description. # (thus requiring an explicit @brief command for a brief description.)
JAVADOC_AUTOBRIEF = NO JAVADOC_AUTOBRIEF = NO
# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen # If the QT_AUTOBRIEF tag is set to YES then Doxygen will
# treat a multi-line C++ special comment block (i.e. a block of //! or /// # interpret the first line (until the first dot) of a Qt-style
# comments) as a brief description. This used to be the default behaviour. # comment as the brief description. If set to NO, the comments
# The new default is to treat a multi-line C++ comment block as a detailed # will behave just like regular Qt-style comments (thus requiring
# description. Set this tag to YES if you prefer the old behaviour instead. # an explicit \brief command for a brief description.)
MULTILINE_CPP_IS_BRIEF = NO QT_AUTOBRIEF = NO
# If the DETAILS_AT_TOP tag is set to YES then Doxygen # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
# will output the detailed description near the top, like JavaDoc. # treat a multi-line C++ special comment block (i.e. a block of //! or ///
# If set to NO, the detailed description appears after the member # comments) as a brief description. This used to be the default behaviour.
# documentation. # The new default is to treat a multi-line C++ comment block as a detailed
# description. Set this tag to YES if you prefer the old behaviour instead.
DETAILS_AT_TOP = NO MULTILINE_CPP_IS_BRIEF = NO
# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
# member inherits the documentation from any documented member that it # member inherits the documentation from any documented member that it
# reimplements. # re-implements.
INHERIT_DOCS = YES INHERIT_DOCS = YES
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
# tag is set to YES, then doxygen will reuse the documentation of the first # a new page for each member. If set to NO, the documentation of a member will
# member in the group (if any) for the other members of the group. By default # be part of the file/class/namespace that contains it.
# all members of a group must be documented explicitly.
DISTRIBUTE_GROUP_DOC = NO SEPARATE_MEMBER_PAGES = NO
# The TAB_SIZE tag can be used to set the number of spaces in a tab. # The TAB_SIZE tag can be used to set the number of spaces in a tab.
# Doxygen uses this value to replace tabs by spaces in code fragments. # Doxygen uses this value to replace tabs by spaces in code fragments.
TAB_SIZE = 8 TAB_SIZE = 8
# This tag can be used to specify a number of aliases that acts # This tag can be used to specify a number of aliases that acts
# as commands in the documentation. An alias has the form "name=value". # as commands in the documentation. An alias has the form "name=value".
# For example adding "sideeffect=\par Side Effects:\n" will allow you to # For example adding "sideeffect=\par Side Effects:\n" will allow you to
# put the command \sideeffect (or @sideeffect) in the documentation, which # put the command \sideeffect (or @sideeffect) in the documentation, which
# will result in a user-defined paragraph with heading "Side Effects:". # will result in a user-defined paragraph with heading "Side Effects:".
# You can put \n's in the value part of an alias to insert newlines. # You can put \n's in the value part of an alias to insert newlines.
ALIASES = ALIASES =
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
# only. Doxygen will then generate output that is more tailored for C. # sources only. Doxygen will then generate output that is more tailored for C.
# For instance, some of the names that are used will be different. The list # For instance, some of the names that are used will be different. The list
# of all members will be omitted, etc. # of all members will be omitted, etc.
OPTIMIZE_OUTPUT_FOR_C = NO OPTIMIZE_OUTPUT_FOR_C = NO
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
# only. Doxygen will then generate output that is more tailored for Java. # sources only. Doxygen will then generate output that is more tailored for
# For instance, namespaces will be presented as packages, qualified scopes # Java. For instance, namespaces will be presented as packages, qualified
# will look different, etc. # scopes will look different, etc.
OPTIMIZE_OUTPUT_JAVA = NO OPTIMIZE_OUTPUT_JAVA = NO
# Set the SUBGROUPING tag to YES (the default) to allow class member groups of # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
# the same type (for instance a group of public functions) to be put as a # sources only. Doxygen will then generate output that is more tailored for
# subgroup of that type (e.g. under the Public Functions section). Set it to # Fortran.
# NO to prevent subgrouping. Alternatively, this can be done per class using
OPTIMIZE_FOR_FORTRAN = NO
# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
# sources. Doxygen will then generate output that is tailored for
# VHDL.
OPTIMIZE_OUTPUT_VHDL = NO
# Doxygen selects the parser to use depending on the extension of the files it parses.
# With this tag you can assign which parser to use for a given extension.
# Doxygen has a built-in mapping, but you can override or extend it using this tag.
# The format is ext=language, where ext is a file extension, and language is one of
# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
EXTENSION_MAPPING =
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
# to include (a tag file for) the STL sources as input, then you should
# set this tag to YES in order to let doxygen match functions declarations and
# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
# func(std::string) {}). This also make the inheritance and collaboration
# diagrams that involve STL classes more complete and accurate.
BUILTIN_STL_SUPPORT = NO
# If you use Microsoft's C++/CLI language, you should set this option to YES to
# enable parsing support.
CPP_CLI_SUPPORT = NO
# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
# Doxygen will parse them like normal C++ but will assume all classes use public
# instead of private inheritance when no explicit protection keyword is present.
SIP_SUPPORT = NO
# For Microsoft's IDL there are propget and propput attributes to indicate getter
# and setter methods for a property. Setting this option to YES (the default)
# will make doxygen to replace the get and set methods by a property in the
# documentation. This will only work if the methods are indeed getting or
# setting a simple type. If this is not the case, or you want to show the
# methods anyway, you should set this option to NO.
IDL_PROPERTY_SUPPORT = YES
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
# tag is set to YES, then doxygen will reuse the documentation of the first
# member in the group (if any) for the other members of the group. By default
# all members of a group must be documented explicitly.
DISTRIBUTE_GROUP_DOC = NO
# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
# the same type (for instance a group of public functions) to be put as a
# subgroup of that type (e.g. under the Public Functions section). Set it to
# NO to prevent subgrouping. Alternatively, this can be done per class using
# the \nosubgrouping command. # the \nosubgrouping command.
SUBGROUPING = YES SUBGROUPING = YES
# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
# is documented as struct, union, or enum with the name of the typedef. So
# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
# with name TypeT. When disabled the typedef will appear as a member of a file,
# namespace, or class. And the struct will be named TypeS. This can typically
# be useful for C code in case the coding convention dictates that all compound
# types are typedef'ed and only the typedef is referenced, never the tag name.
TYPEDEF_HIDES_STRUCT = NO
# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
# determine which symbols to keep in memory and which to flush to disk.
# When the cache is full, less often used symbols will be written to disk.
# For small to medium size projects (<1000 input files) the default value is
# probably good enough. For larger projects a too small cache size can cause
# doxygen to be busy swapping symbols to and from disk most of the time
# causing a significant performance penality.
# If the system has enough physical memory increasing the cache will improve the
# performance by keeping more symbols in memory. Note that the value works on
# a logarithmic scale so increasing the size by one will rougly double the
# memory usage. The cache size is given by this formula:
# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
# corresponding to a cache size of 2^16 = 65536 symbols
SYMBOL_CACHE_SIZE = 0
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# Build related configuration options # Build related configuration options
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
# documentation are documented, even if no documentation was available. # documentation are documented, even if no documentation was available.
# Private class members and static file members will be hidden unless # Private class members and static file members will be hidden unless
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
EXTRACT_ALL = YES EXTRACT_ALL = YES
# If the EXTRACT_PRIVATE tag is set to YES all private members of a class # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
# will be included in the documentation. # will be included in the documentation.
EXTRACT_PRIVATE = YES EXTRACT_PRIVATE = YES
# If the EXTRACT_STATIC tag is set to YES all static members of a file # If the EXTRACT_STATIC tag is set to YES all static members of a file
# will be included in the documentation. # will be included in the documentation.
EXTRACT_STATIC = YES EXTRACT_STATIC = YES
# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
# defined locally in source files will be included in the documentation. # defined locally in source files will be included in the documentation.
# If set to NO only classes defined in header files are included. # If set to NO only classes defined in header files are included.
EXTRACT_LOCAL_CLASSES = YES EXTRACT_LOCAL_CLASSES = YES
# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all # This flag is only useful for Objective-C code. When set to YES local
# undocumented members of documented classes, files or namespaces. # methods, which are defined in the implementation section but not in
# If set to NO (the default) these members will be included in the # the interface are included in the documentation.
# various overviews, but no documentation section is generated. # If set to NO (the default) only methods in the interface are included.
EXTRACT_LOCAL_METHODS = NO
# If this flag is set to YES, the members of anonymous namespaces will be
# extracted and appear in the documentation as a namespace called
# 'anonymous_namespace{file}', where file will be replaced with the base
# name of the file that contains the anonymous namespace. By default
# anonymous namespace are hidden.
EXTRACT_ANON_NSPACES = NO
# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
# undocumented members of documented classes, files or namespaces.
# If set to NO (the default) these members will be included in the
# various overviews, but no documentation section is generated.
# This option has no effect if EXTRACT_ALL is enabled. # This option has no effect if EXTRACT_ALL is enabled.
HIDE_UNDOC_MEMBERS = YES HIDE_UNDOC_MEMBERS = YES
# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
# undocumented classes that are normally visible in the class hierarchy. # undocumented classes that are normally visible in the class hierarchy.
# If set to NO (the default) these classes will be included in the various # If set to NO (the default) these classes will be included in the various
# overviews. This option has no effect if EXTRACT_ALL is enabled. # overviews. This option has no effect if EXTRACT_ALL is enabled.
HIDE_UNDOC_CLASSES = YES HIDE_UNDOC_CLASSES = YES
# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
# friend (class|struct|union) declarations. # friend (class|struct|union) declarations.
# If set to NO (the default) these declarations will be included in the # If set to NO (the default) these declarations will be included in the
# documentation. # documentation.
HIDE_FRIEND_COMPOUNDS = NO HIDE_FRIEND_COMPOUNDS = NO
# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
# documentation blocks found inside the body of a function. # documentation blocks found inside the body of a function.
# If set to NO (the default) these blocks will be appended to the # If set to NO (the default) these blocks will be appended to the
# function's detailed documentation block. # function's detailed documentation block.
HIDE_IN_BODY_DOCS = NO HIDE_IN_BODY_DOCS = NO
# The INTERNAL_DOCS tag determines if documentation # The INTERNAL_DOCS tag determines if documentation
# that is typed after a \internal command is included. If the tag is set # that is typed after a \internal command is included. If the tag is set
# to NO (the default) then the documentation will be excluded. # to NO (the default) then the documentation will be excluded.
# Set it to YES to include the internal documentation. # Set it to YES to include the internal documentation.
INTERNAL_DOCS = NO INTERNAL_DOCS = NO
# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
# file names in lower-case letters. If set to YES upper-case letters are also # file names in lower-case letters. If set to YES upper-case letters are also
# allowed. This is useful if you have classes or files whose names only differ # allowed. This is useful if you have classes or files whose names only differ
# in case and if your file system supports case sensitive file names. Windows # in case and if your file system supports case sensitive file names. Windows
# users are advised to set this option to NO. # and Mac users are advised to set this option to NO.
CASE_SENSE_NAMES = YES CASE_SENSE_NAMES = YES
# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
# will show members with their full class and namespace scopes in the # will show members with their full class and namespace scopes in the
# documentation. If set to YES the scope will be hidden. # documentation. If set to YES the scope will be hidden.
HIDE_SCOPE_NAMES = NO HIDE_SCOPE_NAMES = NO
# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
# will put a list of the files that are included by a file in the documentation # will put a list of the files that are included by a file in the documentation
# of that file. # of that file.
SHOW_INCLUDE_FILES = YES SHOW_INCLUDE_FILES = YES
# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
# is inserted in the documentation for inline members. # is inserted in the documentation for inline members.
INLINE_INFO = YES INLINE_INFO = YES
# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
# will sort the (detailed) documentation of file and class members # will sort the (detailed) documentation of file and class members
# alphabetically by member name. If set to NO the members will appear in # alphabetically by member name. If set to NO the members will appear in
# declaration order. # declaration order.
SORT_MEMBER_DOCS = YES SORT_MEMBER_DOCS = YES
# The GENERATE_TODOLIST tag can be used to enable (YES) or # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
# disable (NO) the todo list. This list is created by putting \todo # brief documentation of file, namespace and class members alphabetically
# by member name. If set to NO (the default) the members will appear in
# declaration order.
SORT_BRIEF_DOCS = NO
# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
SORT_MEMBERS_CTORS_1ST = NO
# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
# hierarchy of group names into alphabetical order. If set to NO (the default)
# the group names will appear in their defined order.
SORT_GROUP_NAMES = NO
# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
# sorted by fully-qualified names, including namespaces. If set to
# NO (the default), the class list will be sorted only by class name,
# not including the namespace part.
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
# Note: This option applies only to the class list, not to the
# alphabetical list.
SORT_BY_SCOPE_NAME = NO
# The GENERATE_TODOLIST tag can be used to enable (YES) or
# disable (NO) the todo list. This list is created by putting \todo
# commands in the documentation. # commands in the documentation.
GENERATE_TODOLIST = YES GENERATE_TODOLIST = YES
# The GENERATE_TESTLIST tag can be used to enable (YES) or # The GENERATE_TESTLIST tag can be used to enable (YES) or
# disable (NO) the test list. This list is created by putting \test # disable (NO) the test list. This list is created by putting \test
# commands in the documentation. # commands in the documentation.
GENERATE_TESTLIST = YES GENERATE_TESTLIST = YES
# The GENERATE_BUGLIST tag can be used to enable (YES) or # The GENERATE_BUGLIST tag can be used to enable (YES) or
# disable (NO) the bug list. This list is created by putting \bug # disable (NO) the bug list. This list is created by putting \bug
# commands in the documentation. # commands in the documentation.
GENERATE_BUGLIST = YES GENERATE_BUGLIST = YES
# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
# disable (NO) the deprecated list. This list is created by putting # disable (NO) the deprecated list. This list is created by putting
# \deprecated commands in the documentation. # \deprecated commands in the documentation.
GENERATE_DEPRECATEDLIST= YES GENERATE_DEPRECATEDLIST= YES
# The ENABLED_SECTIONS tag can be used to enable conditional # The ENABLED_SECTIONS tag can be used to enable conditional
# documentation sections, marked by \if sectionname ... \endif. # documentation sections, marked by \if sectionname ... \endif.
ENABLED_SECTIONS = ENABLED_SECTIONS =
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
# the initial value of a variable or define consists of for it to appear in # the initial value of a variable or define consists of for it to appear in
# the documentation. If the initializer consists of more lines than specified # the documentation. If the initializer consists of more lines than specified
# here it will be hidden. Use a value of 0 to hide initializers completely. # here it will be hidden. Use a value of 0 to hide initializers completely.
# The appearance of the initializer of individual variables and defines in the # The appearance of the initializer of individual variables and defines in the
# documentation can be controlled using \showinitializer or \hideinitializer # documentation can be controlled using \showinitializer or \hideinitializer
# command in the documentation regardless of this setting. # command in the documentation regardless of this setting.
MAX_INITIALIZER_LINES = 30 MAX_INITIALIZER_LINES = 30
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
# at the bottom of the documentation of classes and structs. If set to YES the # at the bottom of the documentation of classes and structs. If set to YES the
# list will mention the files that were used to generate the documentation. # list will mention the files that were used to generate the documentation.
SHOW_USED_FILES = YES SHOW_USED_FILES = YES
# If the sources in your project are distributed over multiple directories
# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
# in the documentation. The default is NO.
SHOW_DIRECTORIES = NO
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
SHOW_FILES = YES
# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
# Namespaces page.
# This will remove the Namespaces entry from the Quick Index
# and from the Folder Tree View (if specified). The default is YES.
SHOW_NAMESPACES = YES
# The FILE_VERSION_FILTER tag can be used to specify a program or script that
# doxygen should invoke to get the current version for each file (typically from
# the version control system). Doxygen will invoke the program by executing (via
# popen()) the command <command> <input-file>, where <command> is the value of
# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
# provided by doxygen. Whatever the program writes to standard output
# is used as the file version. See the manual for examples.
FILE_VERSION_FILTER =
# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
# doxygen. The layout file controls the global structure of the generated output files
# in an output format independent way. The create the layout file that represents
# doxygen's defaults, run doxygen with the -l option. You can optionally specify a
# file name after the option, if omitted DoxygenLayout.xml will be used as the name
# of the layout file.
LAYOUT_FILE =
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options related to warning and progress messages # configuration options related to warning and progress messages
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# The QUIET tag can be used to turn on/off the messages that are generated # The QUIET tag can be used to turn on/off the messages that are generated
# by doxygen. Possible values are YES and NO. If left blank NO is used. # by doxygen. Possible values are YES and NO. If left blank NO is used.
QUIET = YES QUIET = YES
# The WARNINGS tag can be used to turn on/off the warning messages that are # The WARNINGS tag can be used to turn on/off the warning messages that are
# generated by doxygen. Possible values are YES and NO. If left blank # generated by doxygen. Possible values are YES and NO. If left blank
# NO is used. # NO is used.
WARNINGS = YES WARNINGS = YES
# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
# for undocumented members. If EXTRACT_ALL is set to YES then this flag will # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
# automatically be disabled. # automatically be disabled.
WARN_IF_UNDOCUMENTED = YES WARN_IF_UNDOCUMENTED = YES
# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
# potential errors in the documentation, such as not documenting some # potential errors in the documentation, such as not documenting some
# parameters in a documented function, or documenting parameters that # parameters in a documented function, or documenting parameters that
# don't exist or using markup commands wrongly. # don't exist or using markup commands wrongly.
WARN_IF_DOC_ERROR = YES WARN_IF_DOC_ERROR = YES
# The WARN_FORMAT tag determines the format of the warning messages that # This WARN_NO_PARAMDOC option can be abled to get warnings for
# doxygen can produce. The string should contain the $file, $line, and $text # functions that are documented, but have no documentation for their parameters
# tags, which will be replaced by the file and line number from which the # or return value. If set to NO (the default) doxygen will only warn about
# warning originated and the warning text. # wrong or incomplete parameter documentation, but not about the absence of
# documentation.
WARN_NO_PARAMDOC = NO
# The WARN_FORMAT tag determines the format of the warning messages that
# doxygen can produce. The string should contain the $file, $line, and $text
# tags, which will be replaced by the file and line number from which the
# warning originated and the warning text. Optionally the format may contain
# $version, which will be replaced by the version of the file (if it could
# be obtained via FILE_VERSION_FILTER)
WARN_FORMAT = "$file:$line: $text" WARN_FORMAT = "$file:$line: $text"
# The WARN_LOGFILE tag can be used to specify a file to which warning # The WARN_LOGFILE tag can be used to specify a file to which warning
# and error messages should be written. If left blank the output is written # and error messages should be written. If left blank the output is written
# to stderr. # to stderr.
WARN_LOGFILE = WARN_LOGFILE =
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options related to the input files # configuration options related to the input files
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# The INPUT tag can be used to specify the files and/or directories that contain # The INPUT tag can be used to specify the files and/or directories that contain
# documented source files. You may enter file names like "myfile.cpp" or # documented source files. You may enter file names like "myfile.cpp" or
# directories like "/usr/src/myproject". Separate the files or directories # directories like "/usr/src/myproject". Separate the files or directories
# with spaces. # with spaces.
INPUT = $(pwre_croot)/src/doc/dox/src/doxygen.dx \ INPUT = $(pwre_croot)/src/doc/dox/src/doxygen.dx \
$(pwre_croot)/src/exp/inc/src \ $(pwre_croot)/src/exp/inc/src \
$(pwre_croot)/xtt/lib/glow/src \
$(pwre_croot)/xtt/lib/ge/src \
$(pwre_croot)/src/lib/rt/src $(pwre_croot)/src/lib/rt/src
# If the value of the INPUT tag contains directories, you can use the # This tag can be used to specify the character encoding of the source files
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
# and *.h) to filter out the source-files in the directories. If left # also the default input encoding. Doxygen uses libiconv (or the iconv built
# blank the following patterns are tested: # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp # the list of possible encodings.
# *.h++ *.idl *.odl *.cs *.php *.php3 *.inc
INPUT_ENCODING = UTF-8
# If the value of the INPUT tag contains directories, you can use the
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
# and *.h) to filter out the source-files in the directories. If left
# blank the following patterns are tested:
# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
FILE_PATTERNS = *.cpp \ FILE_PATTERNS = *.cpp \
*.c \ *.c \
*.h *.h
# The RECURSIVE tag can be used to turn specify whether or not subdirectories # The RECURSIVE tag can be used to turn specify whether or not subdirectories
# should be searched for input files as well. Possible values are YES and NO. # should be searched for input files as well. Possible values are YES and NO.
# If left blank NO is used. # If left blank NO is used.
RECURSIVE = YES RECURSIVE = YES
# The EXCLUDE tag can be used to specify files and/or directories that should # The EXCLUDE tag can be used to specify files and/or directories that should
# excluded from the INPUT source files. This way you can easily exclude a # excluded from the INPUT source files. This way you can easily exclude a
# subdirectory from a directory tree whose root is specified with the INPUT tag. # subdirectory from a directory tree whose root is specified with the INPUT tag.
EXCLUDE = EXCLUDE =
# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories # The EXCLUDE_SYMLINKS tag can be used select whether or not files or
# that are symbolic links (a Unix filesystem feature) are excluded from the input. # directories that are symbolic links (a Unix filesystem feature) are excluded
# from the input.
EXCLUDE_SYMLINKS = NO EXCLUDE_SYMLINKS = NO
# If the value of the INPUT tag contains directories, you can use the # If the value of the INPUT tag contains directories, you can use the
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
# certain files from those directories. # certain files from those directories. Note that the wildcards are matched
# against the file with absolute path, so to exclude all test directories
# for example use the pattern */test/*
EXCLUDE_PATTERNS = *_bitmap_*.h EXCLUDE_PATTERNS = *_bitmap_*.h
# The EXAMPLE_PATH tag can be used to specify one or more files or # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
# directories that contain example code fragments that are included (see # (namespaces, classes, functions, etc.) that should be excluded from the
# output. The symbol name can be a fully qualified name, a word, or if the
# wildcard * is used, a substring. Examples: ANamespace, AClass,
# AClass::ANamespace, ANamespace::*Test
EXCLUDE_SYMBOLS =
# The EXAMPLE_PATH tag can be used to specify one or more files or
# directories that contain example code fragments that are included (see
# the \include command). # the \include command).
EXAMPLE_PATH = EXAMPLE_PATH =
# If the value of the EXAMPLE_PATH tag contains directories, you can use the # If the value of the EXAMPLE_PATH tag contains directories, you can use the
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
# and *.h) to filter out the source-files in the directories. If left # and *.h) to filter out the source-files in the directories. If left
# blank all files are included. # blank all files are included.
EXAMPLE_PATTERNS = EXAMPLE_PATTERNS =
# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
# searched for input files to be used with the \include or \dontinclude # searched for input files to be used with the \include or \dontinclude
# commands irrespective of the value of the RECURSIVE tag. # commands irrespective of the value of the RECURSIVE tag.
# Possible values are YES and NO. If left blank NO is used. # Possible values are YES and NO. If left blank NO is used.
EXAMPLE_RECURSIVE = NO EXAMPLE_RECURSIVE = NO
# The IMAGE_PATH tag can be used to specify one or more files or # The IMAGE_PATH tag can be used to specify one or more files or
# directories that contain image that are included in the documentation (see # directories that contain image that are included in the documentation (see
# the \image command). # the \image command).
IMAGE_PATH = IMAGE_PATH =
# The INPUT_FILTER tag can be used to specify a program that doxygen should # The INPUT_FILTER tag can be used to specify a program that doxygen should
# invoke to filter for each input file. Doxygen will invoke the filter program # invoke to filter for each input file. Doxygen will invoke the filter program
# by executing (via popen()) the command <filter> <input-file>, where <filter> # by executing (via popen()) the command <filter> <input-file>, where <filter>
# is the value of the INPUT_FILTER tag, and <input-file> is the name of an # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
# input file. Doxygen will then use the output that the filter program writes # input file. Doxygen will then use the output that the filter program writes
# to standard output. # to standard output.
# If FILTER_PATTERNS is specified, this tag will be
# ignored.
INPUT_FILTER =
INPUT_FILTER = # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
# basis.
# Doxygen will compare the file name with each pattern and apply the
# filter if there is a match.
# The filters are a list of the form:
# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
# is applied to all files.
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using FILTER_PATTERNS =
# INPUT_FILTER) will be used to filter the input files when producing source
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
# INPUT_FILTER) will be used to filter the input files when producing source
# files to browse (i.e. when SOURCE_BROWSER is set to YES). # files to browse (i.e. when SOURCE_BROWSER is set to YES).
FILTER_SOURCE_FILES = NO FILTER_SOURCE_FILES = NO
...@@ -446,36 +683,54 @@ FILTER_SOURCE_FILES = NO ...@@ -446,36 +683,54 @@ FILTER_SOURCE_FILES = NO
# configuration options related to source browsing # configuration options related to source browsing
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the SOURCE_BROWSER tag is set to YES then a list of source files will # If the SOURCE_BROWSER tag is set to YES then a list of source files will
# be generated. Documented entities will be cross-referenced with these sources. # be generated. Documented entities will be cross-referenced with these sources.
# Note: To get rid of all source code in the generated output, make sure also
# VERBATIM_HEADERS is set to NO.
SOURCE_BROWSER = YES SOURCE_BROWSER = YES
# Setting the INLINE_SOURCES tag to YES will include the body # Setting the INLINE_SOURCES tag to YES will include the body
# of functions and classes directly in the documentation. # of functions and classes directly in the documentation.
INLINE_SOURCES = NO INLINE_SOURCES = NO
# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
# doxygen to hide any special comment blocks from generated source code # doxygen to hide any special comment blocks from generated source code
# fragments. Normal C and C++ comments will always remain visible. # fragments. Normal C and C++ comments will always remain visible.
STRIP_CODE_COMMENTS = YES STRIP_CODE_COMMENTS = YES
# If the REFERENCED_BY_RELATION tag is set to YES (the default) # If the REFERENCED_BY_RELATION tag is set to YES
# then for each documented function all documented # then for each documented function all documented
# functions referencing it will be listed. # functions referencing it will be listed.
REFERENCED_BY_RELATION = YES REFERENCED_BY_RELATION = YES
# If the REFERENCES_RELATION tag is set to YES (the default) # If the REFERENCES_RELATION tag is set to YES
# then for each documented function all documented entities # then for each documented function all documented entities
# called/used by that function will be listed. # called/used by that function will be listed.
REFERENCES_RELATION = YES REFERENCES_RELATION = YES
# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
# will generate a verbatim copy of the header file for each class for # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
# link to the source code.
# Otherwise they will link to the documentation.
REFERENCES_LINK_SOURCE = YES
# If the USE_HTAGS tag is set to YES then the references to source code
# will point to the HTML generated by the htags(1) tool instead of doxygen
# built-in source browser. The htags tool is part of GNU's global source
# tagging system (see http://www.gnu.org/software/global/global.html). You
# will need version 4.8.6 or higher.
USE_HTAGS = NO
# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
# will generate a verbatim copy of the header file for each class for
# which an include is specified. Set to NO to disable this. # which an include is specified. Set to NO to disable this.
VERBATIM_HEADERS = YES VERBATIM_HEADERS = YES
...@@ -484,277 +739,393 @@ VERBATIM_HEADERS = YES ...@@ -484,277 +739,393 @@ VERBATIM_HEADERS = YES
# configuration options related to the alphabetical class index # configuration options related to the alphabetical class index
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
# of all compounds will be generated. Enable this if the project # of all compounds will be generated. Enable this if the project
# contains a lot of classes, structs, unions or interfaces. # contains a lot of classes, structs, unions or interfaces.
ALPHABETICAL_INDEX = YES ALPHABETICAL_INDEX = YES
# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
# in which this list will be split (can be a number in the range [1..20]) # in which this list will be split (can be a number in the range [1..20])
COLS_IN_ALPHA_INDEX = 3 COLS_IN_ALPHA_INDEX = 3
# In case all classes in a project start with a common prefix, all # In case all classes in a project start with a common prefix, all
# classes will be put under the same header in the alphabetical index. # classes will be put under the same header in the alphabetical index.
# The IGNORE_PREFIX tag can be used to specify one or more prefixes that # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
# should be ignored while generating the index headers. # should be ignored while generating the index headers.
IGNORE_PREFIX = IGNORE_PREFIX =
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options related to the HTML output # configuration options related to the HTML output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_HTML tag is set to YES (the default) Doxygen will # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
# generate HTML output. # generate HTML output.
GENERATE_HTML = YES GENERATE_HTML = YES
# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be # If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `html' will be used as the default path. # put in front of it. If left blank `html' will be used as the default path.
HTML_OUTPUT = $(pwr_doc)/dox HTML_OUTPUT = $(pwr_doc)/dox
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
# each generated HTML page (for example: .htm,.php,.asp). If it is left blank # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
# doxygen will generate files with .html extension. # doxygen will generate files with .html extension.
HTML_FILE_EXTENSION = .html HTML_FILE_EXTENSION = .html
# The HTML_HEADER tag can be used to specify a personal HTML header for # The HTML_HEADER tag can be used to specify a personal HTML header for
# each generated HTML page. If it is left blank doxygen will generate a # each generated HTML page. If it is left blank doxygen will generate a
# standard header. # standard header.
HTML_HEADER = HTML_HEADER =
# The HTML_FOOTER tag can be used to specify a personal HTML footer for # The HTML_FOOTER tag can be used to specify a personal HTML footer for
# each generated HTML page. If it is left blank doxygen will generate a # each generated HTML page. If it is left blank doxygen will generate a
# standard footer. # standard footer.
HTML_FOOTER = HTML_FOOTER =
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
# style sheet that is used by each HTML page. It can be used to # style sheet that is used by each HTML page. It can be used to
# fine-tune the look of the HTML output. If the tag is left blank doxygen # fine-tune the look of the HTML output. If the tag is left blank doxygen
# will generate a default style sheet # will generate a default style sheet. Note that doxygen will try to copy
# the style sheet file to the HTML output directory, so don't put your own
# stylesheet in the HTML output directory as well, or it will be erased!
HTML_STYLESHEET = HTML_STYLESHEET =
# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
# files or namespaces will be aligned in HTML using tables. If set to # files or namespaces will be aligned in HTML using tables. If set to
# NO a bullet list will be used. # NO a bullet list will be used.
HTML_ALIGN_MEMBERS = YES HTML_ALIGN_MEMBERS = YES
# If the GENERATE_HTMLHELP tag is set to YES, additional index files # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# will be generated that can be used as input for tools like the # documentation will contain sections that can be hidden and shown after the
# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) # page has loaded. For this to work a browser that supports
# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
HTML_DYNAMIC_SECTIONS = NO
# If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard).
# To create a documentation set, doxygen will generate a Makefile in the
# HTML output directory. Running make will produce the docset in that
# directory and running "make install" will install the docset in
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
# it at startup.
# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
GENERATE_DOCSET = NO
# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
# feed. A documentation feed provides an umbrella under which multiple
# documentation sets from a single provider (such as a company or product suite)
# can be grouped.
DOCSET_FEEDNAME = "Doxygen generated docs"
# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
# should uniquely identify the documentation set bundle. This should be a
# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
# will append .docset to the name.
DOCSET_BUNDLE_ID = org.doxygen.Project
# If the GENERATE_HTMLHELP tag is set to YES, additional index files
# will be generated that can be used as input for tools like the
# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
# of the generated HTML documentation. # of the generated HTML documentation.
GENERATE_HTMLHELP = NO GENERATE_HTMLHELP = NO
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
# be used to specify the file name of the resulting .chm file. You # be used to specify the file name of the resulting .chm file. You
# can add a path in front of the file if the result should not be # can add a path in front of the file if the result should not be
# written to the html output dir. # written to the html output directory.
CHM_FILE = CHM_FILE =
# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
# be used to specify the location (absolute path including file name) of # be used to specify the location (absolute path including file name) of
# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
# the HTML help compiler on the generated index.hhp. # the HTML help compiler on the generated index.hhp.
HHC_LOCATION = HHC_LOCATION =
# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
# controls if a separate .chi index file is generated (YES) or that # controls if a separate .chi index file is generated (YES) or that
# it should be included in the master .chm file (NO). # it should be included in the master .chm file (NO).
GENERATE_CHI = NO GENERATE_CHI = NO
# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag # If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
# controls whether a binary table of contents is generated (YES) or a # is used to encode HtmlHelp index (hhk), content (hhc) and project file
# content.
CHM_INDEX_ENCODING =
# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
# controls whether a binary table of contents is generated (YES) or a
# normal table of contents (NO) in the .chm file. # normal table of contents (NO) in the .chm file.
BINARY_TOC = NO BINARY_TOC = NO
# The TOC_EXPAND flag can be set to YES to add extra items for group members # The TOC_EXPAND flag can be set to YES to add extra items for group members
# to the contents of the HTML help documentation and to the tree view. # to the contents of the HTML help documentation and to the tree view.
TOC_EXPAND = NO TOC_EXPAND = NO
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
# top of each HTML page. The value NO (the default) enables the index and # are set, an additional index file will be generated that can be used as input for
# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
# HTML documentation.
GENERATE_QHP = NO
# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
# be used to specify the file name of the resulting .qch file.
# The path specified is relative to the HTML output folder.
QCH_FILE =
# The QHP_NAMESPACE tag specifies the namespace to use when generating
# Qt Help Project output. For more information please see
# http://doc.trolltech.com/qthelpproject.html#namespace
QHP_NAMESPACE =
# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
# Qt Help Project output. For more information please see
# http://doc.trolltech.com/qthelpproject.html#virtual-folders
QHP_VIRTUAL_FOLDER = doc
# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
# For more information please see
# http://doc.trolltech.com/qthelpproject.html#custom-filters
QHP_CUST_FILTER_NAME =
# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
QHP_CUST_FILTER_ATTRS =
# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's
# filter section matches.
# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
QHP_SECT_FILTER_ATTRS =
# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
# be used to specify the location of Qt's qhelpgenerator.
# If non-empty doxygen will try to run qhelpgenerator on the generated
# .qhp file.
QHG_LOCATION =
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
# top of each HTML page. The value NO (the default) enables the index and
# the value YES disables it. # the value YES disables it.
DISABLE_INDEX = NO DISABLE_INDEX = NO
# This tag can be used to set the number of enum values (range [1..20]) # This tag can be used to set the number of enum values (range [1..20])
# that doxygen will group on one line in the generated HTML documentation. # that doxygen will group on one line in the generated HTML documentation.
ENUM_VALUES_PER_LINE = 4 ENUM_VALUES_PER_LINE = 4
# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# generated containing a tree-like index structure (just like the one that # structure should be generated to display hierarchical information.
# is generated for HTML Help). For this to work a browser that supports # If the tag value is set to YES, a side panel will be generated
# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, # containing a tree-like index structure (just like the one that
# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are # is generated for HTML Help). For this to work a browser that supports
# probably better off using the HTML help feature. # JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
# Windows users are probably better off using the HTML help feature.
GENERATE_TREEVIEW = NO GENERATE_TREEVIEW = NO
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
# used to set the initial width (in pixels) of the frame in which the tree # and Class Hierarchy pages using a tree view instead of an ordered list.
USE_INLINE_TREES = NO
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown. # is shown.
TREEVIEW_WIDTH = 250 TREEVIEW_WIDTH = 250
# Use this tag to change the font size of Latex formulas included
# as images in the HTML documentation. The default is 10. Note that
# when you change the font size after a successful doxygen run you need
# to manually remove any form_*.png images from the HTML output directory
# to force them to be regenerated.
FORMULA_FONTSIZE = 10
# When the SEARCHENGINE tag is enable doxygen will generate a search box for the HTML output. The underlying search engine uses javascript
# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP) or Qt help (GENERATE_QHP)
# there is already a search function so this one should typically
# be disabled.
SEARCHENGINE = YES
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options related to the LaTeX output # configuration options related to the LaTeX output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
# generate Latex output. # generate Latex output.
GENERATE_LATEX = NO GENERATE_LATEX = NO
# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be # If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `latex' will be used as the default path. # put in front of it. If left blank `latex' will be used as the default path.
LATEX_OUTPUT = latex LATEX_OUTPUT = latex
# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
# invoked. If left blank `latex' will be used as the default command name. # invoked. If left blank `latex' will be used as the default command name.
LATEX_CMD_NAME = latex LATEX_CMD_NAME = latex
# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
# generate index for LaTeX. If left blank `makeindex' will be used as the # generate index for LaTeX. If left blank `makeindex' will be used as the
# default command name. # default command name.
MAKEINDEX_CMD_NAME = makeindex MAKEINDEX_CMD_NAME = makeindex
# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
# LaTeX documents. This may be useful for small projects and may help to # LaTeX documents. This may be useful for small projects and may help to
# save some trees in general. # save some trees in general.
COMPACT_LATEX = NO COMPACT_LATEX = NO
# The PAPER_TYPE tag can be used to set the paper type that is used # The PAPER_TYPE tag can be used to set the paper type that is used
# by the printer. Possible values are: a4, a4wide, letter, legal and # by the printer. Possible values are: a4, a4wide, letter, legal and
# executive. If left blank a4wide will be used. # executive. If left blank a4wide will be used.
PAPER_TYPE = a4wide PAPER_TYPE = a4wide
# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
# packages that should be included in the LaTeX output. # packages that should be included in the LaTeX output.
EXTRA_PACKAGES = EXTRA_PACKAGES =
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
# the generated latex document. The header should contain everything until # the generated latex document. The header should contain everything until
# the first chapter. If it is left blank doxygen will generate a # the first chapter. If it is left blank doxygen will generate a
# standard header. Notice: only use this tag if you know what you are doing! # standard header. Notice: only use this tag if you know what you are doing!
LATEX_HEADER = LATEX_HEADER =
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
# is prepared for conversion to pdf (using ps2pdf). The pdf file will # is prepared for conversion to pdf (using ps2pdf). The pdf file will
# contain links (just like the HTML output) instead of page references # contain links (just like the HTML output) instead of page references
# This makes the output suitable for online browsing using a pdf viewer. # This makes the output suitable for online browsing using a pdf viewer.
PDF_HYPERLINKS = NO PDF_HYPERLINKS = NO
# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
# plain latex in the generated Makefile. Set this option to YES to get a # plain latex in the generated Makefile. Set this option to YES to get a
# higher quality PDF documentation. # higher quality PDF documentation.
USE_PDFLATEX = NO USE_PDFLATEX = NO
# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
# command to the generated LaTeX files. This will instruct LaTeX to keep # command to the generated LaTeX files. This will instruct LaTeX to keep
# running if errors occur, instead of asking the user for help. # running if errors occur, instead of asking the user for help.
# This option is also used when generating formulas in HTML. # This option is also used when generating formulas in HTML.
LATEX_BATCHMODE = NO LATEX_BATCHMODE = NO
# If LATEX_HIDE_INDICES is set to YES then doxygen will not # If LATEX_HIDE_INDICES is set to YES then doxygen will not
# include the index chapters (such as File Index, Compound Index, etc.) # include the index chapters (such as File Index, Compound Index, etc.)
# in the output. # in the output.
LATEX_HIDE_INDICES = NO LATEX_HIDE_INDICES = NO
# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.
LATEX_SOURCE_CODE = NO
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options related to the RTF output # configuration options related to the RTF output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
# The RTF output is optimised for Word 97 and may not look very pretty with # The RTF output is optimized for Word 97 and may not look very pretty with
# other RTF readers or editors. # other RTF readers or editors.
GENERATE_RTF = NO GENERATE_RTF = NO
# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be # If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `rtf' will be used as the default path. # put in front of it. If left blank `rtf' will be used as the default path.
RTF_OUTPUT = rtf RTF_OUTPUT = rtf
# If the COMPACT_RTF tag is set to YES Doxygen generates more compact # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
# RTF documents. This may be useful for small projects and may help to # RTF documents. This may be useful for small projects and may help to
# save some trees in general. # save some trees in general.
COMPACT_RTF = NO COMPACT_RTF = NO
# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
# will contain hyperlink fields. The RTF file will # will contain hyperlink fields. The RTF file will
# contain links (just like the HTML output) instead of page references. # contain links (just like the HTML output) instead of page references.
# This makes the output suitable for online browsing using WORD or other # This makes the output suitable for online browsing using WORD or other
# programs which support those fields. # programs which support those fields.
# Note: wordpad (write) and others do not support links. # Note: wordpad (write) and others do not support links.
RTF_HYPERLINKS = NO RTF_HYPERLINKS = NO
# Load stylesheet definitions from file. Syntax is similar to doxygen's # Load stylesheet definitions from file. Syntax is similar to doxygen's
# config file, i.e. a series of assigments. You only have to provide # config file, i.e. a series of assignments. You only have to provide
# replacements, missing definitions are set to their default value. # replacements, missing definitions are set to their default value.
RTF_STYLESHEET_FILE = RTF_STYLESHEET_FILE =
# Set optional variables used in the generation of an rtf document. # Set optional variables used in the generation of an rtf document.
# Syntax is similar to doxygen's config file. # Syntax is similar to doxygen's config file.
RTF_EXTENSIONS_FILE = RTF_EXTENSIONS_FILE =
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options related to the man page output # configuration options related to the man page output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_MAN tag is set to YES (the default) Doxygen will # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
# generate man pages # generate man pages
GENERATE_MAN = NO GENERATE_MAN = NO
# The MAN_OUTPUT tag is used to specify where the man pages will be put. # The MAN_OUTPUT tag is used to specify where the man pages will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be # If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `man' will be used as the default path. # put in front of it. If left blank `man' will be used as the default path.
MAN_OUTPUT = man MAN_OUTPUT = man
# The MAN_EXTENSION tag determines the extension that is added to # The MAN_EXTENSION tag determines the extension that is added to
# the generated man pages (default is the subroutine's section .3) # the generated man pages (default is the subroutine's section .3)
MAN_EXTENSION = .3 MAN_EXTENSION = .3
# If the MAN_LINKS tag is set to YES and Doxygen generates man output, # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
# then it will generate one additional man file for each entity # then it will generate one additional man file for each entity
# documented in the real man page(s). These additional files # documented in the real man page(s). These additional files
# only source the real man page, but without them the man command # only source the real man page, but without them the man command
# would be unable to find the correct page. The default is NO. # would be unable to find the correct page. The default is NO.
MAN_LINKS = NO MAN_LINKS = NO
...@@ -763,40 +1134,45 @@ MAN_LINKS = NO ...@@ -763,40 +1134,45 @@ MAN_LINKS = NO
# configuration options related to the XML output # configuration options related to the XML output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_XML tag is set to YES Doxygen will # If the GENERATE_XML tag is set to YES Doxygen will
# generate an XML file that captures the structure of # generate an XML file that captures the structure of
# the code including all documentation. Note that this # the code including all documentation.
# feature is still experimental and incomplete at the
# moment.
GENERATE_XML = NO GENERATE_XML = NO
# The XML_OUTPUT tag is used to specify where the XML pages will be put. # The XML_OUTPUT tag is used to specify where the XML pages will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be # If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `xml' will be used as the default path. # put in front of it. If left blank `xml' will be used as the default path.
XML_OUTPUT = xml XML_OUTPUT = xml
# The XML_SCHEMA tag can be used to specify an XML schema, # The XML_SCHEMA tag can be used to specify an XML schema,
# which can be used by a validating XML parser to check the # which can be used by a validating XML parser to check the
# syntax of the XML files. # syntax of the XML files.
XML_SCHEMA = XML_SCHEMA =
# The XML_DTD tag can be used to specify an XML DTD, # The XML_DTD tag can be used to specify an XML DTD,
# which can be used by a validating XML parser to check the # which can be used by a validating XML parser to check the
# syntax of the XML files. # syntax of the XML files.
XML_DTD = XML_DTD =
# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
# dump the program listings (including syntax highlighting
# and cross-referencing information) to the XML output. Note that
# enabling this will significantly increase the size of the XML output.
XML_PROGRAMLISTING = YES
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# configuration options for the AutoGen Definitions output # configuration options for the AutoGen Definitions output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
# generate an AutoGen Definitions (see autogen.sf.net) file # generate an AutoGen Definitions (see autogen.sf.net) file
# that captures the structure of the code including all # that captures the structure of the code including all
# documentation. Note that this feature is still experimental # documentation. Note that this feature is still experimental
# and incomplete at the moment. # and incomplete at the moment.
GENERATE_AUTOGEN_DEF = NO GENERATE_AUTOGEN_DEF = NO
...@@ -805,283 +1181,341 @@ GENERATE_AUTOGEN_DEF = NO ...@@ -805,283 +1181,341 @@ GENERATE_AUTOGEN_DEF = NO
# configuration options related to the Perl module output # configuration options related to the Perl module output
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the GENERATE_PERLMOD tag is set to YES Doxygen will # If the GENERATE_PERLMOD tag is set to YES Doxygen will
# generate a Perl module file that captures the structure of # generate a Perl module file that captures the structure of
# the code including all documentation. Note that this # the code including all documentation. Note that this
# feature is still experimental and incomplete at the # feature is still experimental and incomplete at the
# moment. # moment.
GENERATE_PERLMOD = NO GENERATE_PERLMOD = NO
# If the PERLMOD_LATEX tag is set to YES Doxygen will generate # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
# the necessary Makefile rules, Perl scripts and LaTeX code to be able # the necessary Makefile rules, Perl scripts and LaTeX code to be able
# to generate PDF and DVI output from the Perl module output. # to generate PDF and DVI output from the Perl module output.
PERLMOD_LATEX = NO PERLMOD_LATEX = NO
# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
# nicely formatted so it can be parsed by a human reader. This is useful # nicely formatted so it can be parsed by a human reader.
# if you want to understand what is going on. On the other hand, if this # This is useful
# tag is set to NO the size of the Perl module output will be much smaller # if you want to understand what is going on.
# On the other hand, if this
# tag is set to NO the size of the Perl module output will be much smaller
# and Perl will parse it just the same. # and Perl will parse it just the same.
PERLMOD_PRETTY = YES PERLMOD_PRETTY = YES
# The names of the make variables in the generated doxyrules.make file # The names of the make variables in the generated doxyrules.make file
# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
# This is useful so different doxyrules.make files included by the same # This is useful so different doxyrules.make files included by the same
# Makefile don't overwrite each other's variables. # Makefile don't overwrite each other's variables.
PERLMOD_MAKEVAR_PREFIX = PERLMOD_MAKEVAR_PREFIX =
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# Configuration options related to the preprocessor # Configuration options related to the preprocessor
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
# evaluate all C-preprocessor directives found in the sources and include # evaluate all C-preprocessor directives found in the sources and include
# files. # files.
ENABLE_PREPROCESSING = YES ENABLE_PREPROCESSING = YES
# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
# names in the source code. If set to NO (the default) only conditional # names in the source code. If set to NO (the default) only conditional
# compilation will be performed. Macro expansion can be done in a controlled # compilation will be performed. Macro expansion can be done in a controlled
# way by setting EXPAND_ONLY_PREDEF to YES. # way by setting EXPAND_ONLY_PREDEF to YES.
MACRO_EXPANSION = YES MACRO_EXPANSION = YES
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
# then the macro expansion is limited to the macros specified with the # then the macro expansion is limited to the macros specified with the
# PREDEFINED and EXPAND_AS_PREDEFINED tags. # PREDEFINED and EXPAND_AS_DEFINED tags.
EXPAND_ONLY_PREDEF = NO EXPAND_ONLY_PREDEF = NO
# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
# in the INCLUDE_PATH (see below) will be search if a #include is found. # in the INCLUDE_PATH (see below) will be search if a #include is found.
SEARCH_INCLUDES = YES SEARCH_INCLUDES = YES
# The INCLUDE_PATH tag can be used to specify one or more directories that # The INCLUDE_PATH tag can be used to specify one or more directories that
# contain include files that are not input files but should be processed by # contain include files that are not input files but should be processed by
# the preprocessor. # the preprocessor.
INCLUDE_PATH = $(pwr_inc) INCLUDE_PATH = $(pwr_inc)
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
# patterns (like *.h and *.hpp) to filter out the header-files in the # patterns (like *.h and *.hpp) to filter out the header-files in the
# directories. If left blank, the patterns specified with FILE_PATTERNS will # directories. If left blank, the patterns specified with FILE_PATTERNS will
# be used. # be used.
INCLUDE_FILE_PATTERNS = INCLUDE_FILE_PATTERNS =
# The PREDEFINED tag can be used to specify one or more macro names that # The PREDEFINED tag can be used to specify one or more macro names that
# are defined before the preprocessor is started (similar to the -D option of # are defined before the preprocessor is started (similar to the -D option of
# gcc). The argument of the tag is a list of macros of the form: name # gcc). The argument of the tag is a list of macros of the form: name
# or name=definition (no spaces). If the definition and the = are # or name=definition (no spaces). If the definition and the = are
# omitted =1 is assumed. # omitted =1 is assumed. To prevent a macro definition from being
# undefined via #undef or recursively expanded use the := operator
# instead of the = operator.
PREDEFINED = OS_LINUX=1 \ PREDEFINED = OS_LINUX=1 \
OS=LINUX \ OS=LINUX \
__cplusplus=1 \ __cplusplus=1 \
__DOXYGEN=1 __DOXYGEN=1
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
# this tag can be used to specify a list of macro names that should be expanded. # this tag can be used to specify a list of macro names that should be expanded.
# The macro definition that is found in the sources will be used. # The macro definition that is found in the sources will be used.
# Use the PREDEFINED tag if you want to use a different macro definition. # Use the PREDEFINED tag if you want to use a different macro definition.
EXPAND_AS_DEFINED = EXPAND_AS_DEFINED =
# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
# doxygen's preprocessor will remove all function-like macros that are alone # doxygen's preprocessor will remove all function-like macros that are alone
# on a line, have an all uppercase name, and do not end with a semicolon. Such # on a line, have an all uppercase name, and do not end with a semicolon. Such
# function macros are typically used for boiler-plate code, and will confuse the # function macros are typically used for boiler-plate code, and will confuse
# parser if not removed. # the parser if not removed.
SKIP_FUNCTION_MACROS = YES SKIP_FUNCTION_MACROS = YES
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# Configuration::addtions related to external references # Configuration::additions related to external references
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# The TAGFILES option can be used to specify one or more tagfiles. # The TAGFILES option can be used to specify one or more tagfiles.
# Optionally an initial location of the external documentation # Optionally an initial location of the external documentation
# can be added for each tagfile. The format of a tag file without # can be added for each tagfile. The format of a tag file without
# this location is as follows: # this location is as follows:
# TAGFILES = file1 file2 ... #
# Adding location for the tag files is done as follows: # TAGFILES = file1 file2 ...
# TAGFILES = file1=loc1 "file2 = loc2" ... # Adding location for the tag files is done as follows:
# where "loc1" and "loc2" can be relative or absolute paths or #
# URLs. If a location is present for each tag, the installdox tool # TAGFILES = file1=loc1 "file2 = loc2" ...
# where "loc1" and "loc2" can be relative or absolute paths or
# URLs. If a location is present for each tag, the installdox tool
# does not have to be run to correct the links. # does not have to be run to correct the links.
# Note that each tag file must have a unique name # Note that each tag file must have a unique name
# (where the name does NOT include the path) # (where the name does NOT include the path)
# If a tag file is not located in the directory in which doxygen # If a tag file is not located in the directory in which doxygen
# is run, you must also specify the path to the tagfile here. # is run, you must also specify the path to the tagfile here.
TAGFILES = TAGFILES =
# When a file name is specified after GENERATE_TAGFILE, doxygen will create # When a file name is specified after GENERATE_TAGFILE, doxygen will create
# a tag file that is based on the input files it reads. # a tag file that is based on the input files it reads.
GENERATE_TAGFILE = GENERATE_TAGFILE =
# If the ALLEXTERNALS tag is set to YES all external classes will be listed # If the ALLEXTERNALS tag is set to YES all external classes will be listed
# in the class index. If set to NO only the inherited external classes # in the class index. If set to NO only the inherited external classes
# will be listed. # will be listed.
ALLEXTERNALS = NO ALLEXTERNALS = NO
# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
# in the modules index. If set to NO, only the current project's groups will # in the modules index. If set to NO, only the current project's groups will
# be listed. # be listed.
EXTERNAL_GROUPS = YES EXTERNAL_GROUPS = YES
# The PERL_PATH should be the absolute path and name of the perl script # The PERL_PATH should be the absolute path and name of the perl script
# interpreter (i.e. the result of `which perl'). # interpreter (i.e. the result of `which perl').
PERL_PATH = /usr/bin/perl PERL_PATH = /usr/bin/perl
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# Configuration options related to the dot tool # Configuration options related to the dot tool
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
# super classes. Setting the tag to NO turns the diagrams off. Note that this # or super classes. Setting the tag to NO turns the diagrams off. Note that
# option is superceded by the HAVE_DOT option below. This is only a fallback. It is # this option is superseded by the HAVE_DOT option below. This is only a
# recommended to install and use dot, since it yields more powerful graphs. # fallback. It is recommended to install and use dot, since it yields more
# powerful graphs.
CLASS_DIAGRAMS = YES CLASS_DIAGRAMS = YES
# If set to YES, the inheritance and collaboration graphs will hide # You can define message sequence charts within doxygen comments using the \msc
# inheritance and usage relations if the target is undocumented # command. Doxygen will then run the mscgen tool (see
# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
# documentation. The MSCGEN_PATH tag allows you to specify the directory where
# the mscgen tool resides. If left empty the tool is assumed to be found in the
# default search path.
MSCGEN_PATH =
# If set to YES, the inheritance and collaboration graphs will hide
# inheritance and usage relations if the target is undocumented
# or is not a class. # or is not a class.
HIDE_UNDOC_RELATIONS = YES HIDE_UNDOC_RELATIONS = YES
# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
# available from the path. This tool is part of Graphviz, a graph visualization # available from the path. This tool is part of Graphviz, a graph visualization
# toolkit from AT&T and Lucent Bell Labs. The other options in this section # toolkit from AT&T and Lucent Bell Labs. The other options in this section
# have no effect if this option is set to NO (the default) # have no effect if this option is set to NO (the default)
HAVE_DOT = NO HAVE_DOT = NO
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen # By default doxygen will write a font called FreeSans.ttf to the output
# will generate a graph for each documented class showing the direct and # directory and reference it in all dot files that doxygen generates. This
# indirect inheritance relations. Setting this tag to YES will force the # font does not include all possible unicode characters however, so when you need
# these (or just want a differently looking font) you can specify the font name
# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
# which can be done by putting it in a standard location or by setting the
# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
# containing the font.
DOT_FONTNAME = FreeSans
# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
# The default size is 10pt.
DOT_FONTSIZE = 10
# By default doxygen will tell dot to use the output directory to look for the
# FreeSans.ttf font (which doxygen will put there itself). If you specify a
# different font using DOT_FONTNAME you can set the path where dot
# can find it using this tag.
DOT_FONTPATH =
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
# will generate a graph for each documented class showing the direct and
# indirect inheritance relations. Setting this tag to YES will force the
# the CLASS_DIAGRAMS tag to NO. # the CLASS_DIAGRAMS tag to NO.
CLASS_GRAPH = YES CLASS_GRAPH = YES
# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
# will generate a graph for each documented class showing the direct and # will generate a graph for each documented class showing the direct and
# indirect implementation dependencies (inheritance, containment, and # indirect implementation dependencies (inheritance, containment, and
# class references variables) of the class with other documented classes. # class references variables) of the class with other documented classes.
COLLABORATION_GRAPH = YES COLLABORATION_GRAPH = YES
# If the UML_LOOK tag is set to YES doxygen will generate inheritance and # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
# collaboration diagrams in a style similiar to the OMG's Unified Modeling # will generate a graph for groups, showing the direct groups dependencies
GROUP_GRAPHS = YES
# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
# collaboration diagrams in a style similar to the OMG's Unified Modeling
# Language. # Language.
UML_LOOK = NO UML_LOOK = NO
# If set to YES, the inheritance and collaboration graphs will show the # If set to YES, the inheritance and collaboration graphs will show the
# relations between templates and their instances. # relations between templates and their instances.
TEMPLATE_RELATIONS = NO TEMPLATE_RELATIONS = NO
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
# tags are set to YES then doxygen will generate a graph for each documented # tags are set to YES then doxygen will generate a graph for each documented
# file showing the direct and indirect include dependencies of the file with # file showing the direct and indirect include dependencies of the file with
# other documented files. # other documented files.
INCLUDE_GRAPH = YES INCLUDE_GRAPH = YES
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
# HAVE_DOT tags are set to YES then doxygen will generate a graph for each # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
# documented header file showing the documented files that directly or # documented header file showing the documented files that directly or
# indirectly include this file. # indirectly include this file.
INCLUDED_BY_GRAPH = YES INCLUDED_BY_GRAPH = YES
# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will # If the CALL_GRAPH and HAVE_DOT options are set to YES then
# generate a call dependency graph for every global function or class method. # doxygen will generate a call dependency graph for every global function
# Note that enabling this option will significantly increase the time of a run. # or class method. Note that enabling this option will significantly increase
# So in most cases it will be better to enable call graphs for selected # the time of a run. So in most cases it will be better to enable call graphs
# functions only using the \callgraph command. # for selected functions only using the \callgraph command.
CALL_GRAPH = NO CALL_GRAPH = NO
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
# doxygen will generate a caller dependency graph for every global function
# or class method. Note that enabling this option will significantly increase
# the time of a run. So in most cases it will be better to enable caller
# graphs for selected functions only using the \callergraph command.
CALLER_GRAPH = NO
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
# will graphical hierarchy of all classes instead of a textual one. # will graphical hierarchy of all classes instead of a textual one.
GRAPHICAL_HIERARCHY = YES GRAPHICAL_HIERARCHY = YES
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
DIRECTORY_GRAPH = YES
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
# generated by dot. Possible values are png, jpg, or gif # generated by dot. Possible values are png, jpg, or gif
# If left blank png will be used. # If left blank png will be used.
DOT_IMAGE_FORMAT = png DOT_IMAGE_FORMAT = png
# The tag DOT_PATH can be used to specify the path where the dot tool can be # The tag DOT_PATH can be used to specify the path where the dot tool can be
# found. If left blank, it is assumed the dot tool can be found on the path. # found. If left blank, it is assumed the dot tool can be found in the path.
DOT_PATH = DOT_PATH =
# The DOTFILE_DIRS tag can be used to specify one or more directories that # The DOTFILE_DIRS tag can be used to specify one or more directories that
# contain dot files that are included in the documentation (see the # contain dot files that are included in the documentation (see the
# \dotfile command). # \dotfile command).
DOTFILE_DIRS = DOTFILE_DIRS =
# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
# (in pixels) of the graphs generated by dot. If a graph becomes larger than # nodes that will be shown in the graph. If the number of nodes in a graph
# this value, doxygen will try to truncate the graph, so that it fits within # becomes larger than this value, doxygen will truncate the graph, which is
# the specified constraint. Beware that most browsers cannot cope with very # visualized by representing a node as a red box. Note that doxygen if the
# large images. # number of direct children of the root node in a graph is already larger than
# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
MAX_DOT_GRAPH_WIDTH = 1024 DOT_GRAPH_MAX_NODES = 50
# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
# (in pixels) of the graphs generated by dot. If a graph becomes larger than # graphs generated by dot. A depth value of 3 means that only nodes reachable
# this value, doxygen will try to truncate the graph, so that it fits within # from the root by following a path via at most 3 edges will be shown. Nodes
# the specified constraint. Beware that most browsers cannot cope with very # that lay further from the root node will be omitted. Note that setting this
# large images. # option to 1 or 2 may greatly reduce the computation time needed for large
# code bases. Also note that the size of a graph can be further restricted by
# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
MAX_DOT_GRAPH_HEIGHT = 1024 MAX_DOT_GRAPH_DEPTH = 0
# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
# graphs generated by dot. A depth value of 3 means that only nodes reachable # background. This is disabled by default, because dot on Windows does not
# from the root by following a path via at most 3 edges will be shown. Nodes that # seem to support this out of the box. Warning: Depending on the platform used,
# lay further from the root node will be omitted. Note that setting this option to # enabling this option may lead to badly anti-aliased labels on the edges of
# 1 or 2 may greatly reduce the computation time needed for large code bases. Also # a graph (i.e. they become hard to read).
# note that a graph may be further truncated if the graph's image dimensions are
# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT).
# If 0 is used for the depth value (the default), the graph is not depth-constrained.
MAX_DOT_GRAPH_DEPTH = 0 DOT_TRANSPARENT = NO
# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
# generate a legend page explaining the meaning of the various boxes and # files in one run (i.e. multiple -o and -T options on the command line). This
# makes dot run faster, but since only newer versions of dot (>1.8.10)
# support this, this feature is disabled by default.
DOT_MULTI_TARGETS = YES
# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
# generate a legend page explaining the meaning of the various boxes and
# arrows in the dot generated graphs. # arrows in the dot generated graphs.
GENERATE_LEGEND = YES GENERATE_LEGEND = YES
# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
# remove the intermediate dot files that are used to generate # remove the intermediate dot files that are used to generate
# the various graphs. # the various graphs.
DOT_CLEANUP = YES DOT_CLEANUP = YES
#---------------------------------------------------------------------------
# Configuration::addtions related to the search engine
#---------------------------------------------------------------------------
# The SEARCHENGINE tag specifies whether or not a search engine should be
# used. If set to NO the values of all tags below this one will be ignored.
SEARCHENGINE = YES
...@@ -40,7 +40,7 @@ $(clean_html) : clean_%.html : %.html ...@@ -40,7 +40,7 @@ $(clean_html) : clean_%.html : %.html
$(doc_dir)/dox/index.html : ../../doxygen.dx $(doc_dir)/dox/index.html : ../../doxygen.dx
@ echo "doxygen documentation $(source) $(target)" @ echo "doxygen documentation $(source) $(target)"
@ doxygen @ doxygen 2> /dev/null
......
...@@ -274,7 +274,7 @@ main ( ...@@ -274,7 +274,7 @@ main (
tmo_ms = 0; tmo_ms = 0;
} }
#ifdef OS_LINUX || defined OS_MACOS #if defined OS_LINUX || defined OS_MACOS
get.data = NULL; get.data = NULL;
qcom_Get(&sts, &my_q, &get, tmo_ms); qcom_Get(&sts, &my_q, &get, tmo_ms);
if (sts != QCOM__TMO && sts != QCOM__QEMPTY) { if (sts != QCOM__TMO && sts != QCOM__QEMPTY) {
......
...@@ -145,8 +145,6 @@ int main ( ...@@ -145,8 +145,6 @@ int main (
pwr_tStatus sts; pwr_tStatus sts;
int event; int event;
plc_sProcess *pp; plc_sProcess *pp;
uid_t ruid;
struct passwd *pwd;
/* /*
struct rlimit rlim; struct rlimit rlim;
int i; int i;
...@@ -171,6 +169,9 @@ int main ( ...@@ -171,6 +169,9 @@ int main (
/* Once threads has set their priority don't run as root */ /* Once threads has set their priority don't run as root */
#if 0 #if 0
uid_t ruid;
struct passwd *pwd;
ruid = getuid(); ruid = getuid();
if (ruid == 0) { if (ruid == 0) {
......
Package: pwr46 Package: pwr47
Version: 4.6.1-1 Version: 4.7.0-1
Section: base Section: base
Priority: optional Priority: optional
Architecture: i386 Architecture: i386
Depends: libc6 (>= 2.7-18), libgtk2.0-0 (>= 2.12.12-1~lenny1), libasound2 (>= 1.0.16-2), libdb4.6 (>=4.6.21-11), libdb4.6++ (>= 4.6.21-11), libmysqlclient15off (>= 5.0.51a-24+lenny1), g++ (>= 4:4.3.2-2) Depends: libc6 (>= 2.7-18), libgtk2.0-0 (>= 2.12.12-1~lenny1), libasound2 (>= 1.0.16-2), libdb4.6 (>=4.6.21-11), libdb4.6++ (>= 4.6.21-11), libmysqlclient15off (>= 5.0.51a-24+lenny1), g++ (>= 4:4.3.2-2)
Replaces: pwrrt,pwr34,pwr39,pwr40,pwr41,pwr42,pwr43,pwr44,pwr45 Replaces: pwrrt,pwr34,pwr39,pwr40,pwr41,pwr42,pwr43,pwr44,pwr45,pwr46
Maintainer: Proview <postmaster@proview.se> Maintainer: Proview <postmaster@proview.se>
Description: Proview development and runtime environment package Description: Proview development and runtime environment package
Proview development and runtime environment Proview development and runtime environment
4.6.1-1 Base release 4.7.0-1 Base release
Package: pwrdemo46 Package: pwrdemo47
Version: 4.6.1-1 Version: 4.7.0-1
Section: base Section: base
Priority: optional Priority: optional
Architecture: i386 Architecture: i386
Depends: pwr46 (>= 4.6.1-1) Depends: pwr47 (>= 4.7.0-1)
Maintainer: Proview <postmaster@proview.se> Maintainer: Proview <postmaster@proview.se>
Description: Proview Demo Project package Description: Proview Demo Project package
Proview Demo Project Proview Demo Project
4.6.1-1 Base release 4.7.0-1 Base release
Package: pwrrt Package: pwrrt
Version: 4.6.1-1 Version: 4.7.0-1
Section: base Section: base
Priority: optional Priority: optional
Architecture: i386 Architecture: i386
Depends: libc6 (>= 2.7-18), libgtk2.0-0 (>= 2.12.12-1~lenny1), libasound2 (>= 1.0.16-2), libdb4.6 (>=4.6.21-11) Depends: libc6 (>= 2.7-18), libgtk2.0-0 (>= 2.12.12-1~lenny1), libasound2 (>= 1.0.16-2), libdb4.6 (>=4.6.21-11)
Replaces: pwr34,pwr39,pwr40,pwr41,pwr42,pwr43,pwr44,pwr45,pwr46 Replaces: pwr34,pwr39,pwr40,pwr41,pwr42,pwr43,pwr44,pwr45,pwr46,pwr47
Maintainer: Proview <postmaster@proview.se> Maintainer: Proview <postmaster@proview.se>
Description: Description:
Proview runtime environment Proview runtime environment
4.6.1-1 Base release 4.7.0-1 Base release
Package: pwrsev Package: pwrsev
Version: 4.6.1-1 Version: 4.7.0-1
Section: base Section: base
Priority: optional Priority: optional
Architecture: i386 Architecture: i386
Depends: libc6 (>= 2.7-18), libgtk2.0-0 (>= 2.12.12-1~lenny1), libasound2 (>= 1.0.16-2), libdb4.6 (>=4.6.21-11), libmysqlclient15off (>= 5.0.51a-24+lenny1) Depends: libc6 (>= 2.7-18), libgtk2.0-0 (>= 2.12.12-1~lenny1), libasound2 (>= 1.0.16-2), libdb4.6 (>=4.6.21-11), libmysqlclient15off (>= 5.0.51a-24+lenny1)
Replaces: pwr34,pwr39,pwr40,pwr41,pwr42,pwr43,pwr44,pwr45 Replaces: pwr34,pwr39,pwr40,pwr41,pwr42,pwr43,pwr44,pwr45,pwr46
Maintainer: Proview <postmaster@proview.se> Maintainer: Proview <postmaster@proview.se>
Description: Description:
Proview storage environment Proview storage environment
4.6.1-1 Base release 4.7.0-1 Base release
...@@ -8,9 +8,9 @@ ...@@ -8,9 +8,9 @@
# #
Name: pwr46 Name: pwr47
Summary: Proview/R development and runtime environment Summary: Proview/R development and runtime environment
Version: 4.6.1 Version: 4.7.0
Release: 1 Release: 1
License: GPL License: GPL
BuildArch: i386 BuildArch: i386
...@@ -200,5 +200,5 @@ fi ...@@ -200,5 +200,5 @@ fi
#%postun #%postun
%changelog %changelog
* Thu May 28 2009 Claes Sjofors <claes.sjofors@proview.se> 4.6.1-1 * Thu Mar 23 2010 Claes Sjofors <claes.sjofors@proview.se> 4.7.0-1
- Base release. - Base release.
...@@ -8,9 +8,9 @@ ...@@ -8,9 +8,9 @@
# #
Name: pwrdemo46 Name: pwrdemo47
Summary: Proview/R demo project Summary: Proview/R demo project
Version: 4.6.1 Version: 4.7.0
Release: 1 Release: 1
License: GPL License: GPL
BuildArch: i386 BuildArch: i386
...@@ -128,6 +128,6 @@ fi ...@@ -128,6 +128,6 @@ fi
#%postun #%postun
%changelog %changelog
* Thu May 28 2009 Claes Sjofors <claes.sjofors@proview.se> 4.6.1-1 * Thu Mar 23 2010 Claes Sjofors <claes.sjofors@proview.se> 4.7.0-1
- Base release - Base release
...@@ -10,7 +10,7 @@ ...@@ -10,7 +10,7 @@
Name: pwrrt Name: pwrrt
Summary: Proview/R runtime environment Summary: Proview/R runtime environment
Version: 4.6.1 Version: 4.7.0
Release: 1 Release: 1
License: GPL License: GPL
BuildArch: i386 BuildArch: i386
...@@ -487,5 +487,5 @@ fi ...@@ -487,5 +487,5 @@ fi
#%postun #%postun
%changelog %changelog
* Thu May 28 2009 Claes Sjofors <claes.sjofors@proview.se> 4.6.1-1 * Thu Mar 23 2010 Claes Sjofors <claes.sjofors@proview.se> 4.7.0-1
- Base release. - Base release.
...@@ -10,7 +10,7 @@ ...@@ -10,7 +10,7 @@
Name: pwrsev Name: pwrsev
Summary: Proview/R storage environment Summary: Proview/R storage environment
Version: 4.6.1 Version: 4.7.0
Release: 1 Release: 1
License: GPL License: GPL
BuildArch: i386 BuildArch: i386
...@@ -420,5 +420,5 @@ fi ...@@ -420,5 +420,5 @@ fi
#%postun #%postun
%changelog %changelog
* Thu May 28 2009 Claes Sjofors <claes.sjofors@proview.se> 4.6.1-1 * Thu Mar 23 2010 Claes Sjofors <claes.sjofors@proview.se> 4.7.0-1
- Base release. - Base release.
Package: pwr46 Package: pwr47
Version: 4.6.1-1 Version: 4.7.0-1
Section: base Section: base
Priority: optional Priority: optional
Architecture: i386 Architecture: i386
Depends: libc6 (>= 2.9-4ubuntu6), libgtk2.0-0 (>= 2.16.1-0ubuntu2), libasound2 (>= 1.0.18-1ubuntu9), libdb4.7 (>=4.7.25-6ubuntu1), libdb4.7++ (>=4.7.25-6ubuntu1), libmysqlclient15off (>= 5.1.30really5.0.75-0ubuntu10), g++ (>= 4:4.3.3-1ubuntu1) Depends: libc6 (>= 2.10.1-0ubuntu16), libgtk2.0-0 (>= 2.18.3-1ubuntu2.2), libasound2 (>= 1.0.20-3ubuntu6.1), libdb4.7 (>=4.7.25-7ubuntu2), libdb4.7++ (>=4.7.25-7ubuntu2), libmysqlclient15off (>= 5.1.30really5.0.83-0ubuntu3), g++ (>= 4:4.4.1-1ubuntu2)
Replaces: pwrrt,pwr34,pwr39,pwr40,pwr41,pwr42,pwr43,pwr44,pwr45 Replaces: pwrrt,pwr34,pwr39,pwr40,pwr41,pwr42,pwr43,pwr44,pwr45,pwr46
Maintainer: Proview <postmaster@proview.se> Maintainer: Proview <postmaster@proview.se>
Description: Proview development and runtime environment package Description: Proview development and runtime environment package
Proview development and runtime environment Proview development and runtime environment
4.6.1-1 Base release 4.7.0-1 Base release
Package: pwrdemo46 Package: pwrdemo47
Version: 4.6.1-1 Version: 4.7.0-1
Section: base Section: base
Priority: optional Priority: optional
Architecture: i386 Architecture: i386
Depends: pwr46 (>= 4.6.1-1) Depends: pwr47 (>= 4.7.0-1)
Replaces: Replaces:
Maintainer: Proview <postmaster@proview.se> Maintainer: Proview <postmaster@proview.se>
Description: Proview Demo Project package Description: Proview Demo Project package
Proview Demo Project Proview Demo Project
4.6.1-1 Base release 4.7.0-1 Base release
Package: pwrrt Package: pwrrt
Version: 4.6.1-1 Version: 4.7.0-1
Section: base Section: base
Priority: optional Priority: optional
Architecture: i386 Architecture: i386
Depends: libc6 (>= 2.8~20080505-0ubuntu7), libgtk2.0-0 (>= 2.14.4-0ubuntu1), libasound2 (>= 1.0.17-0ubuntu4), libdb4.7 (>=4.7.25-3) Depends: libc6 (>= 2.10.1-0ubuntu16), libgtk2.0-0 (>= 2.18.3-1ubuntu2.2), libasound2 (>= 1.0.20-3ubuntu6.1), libdb4.7 (>=4.7.25-7ubuntu2)
Depends: libc6 (>= 2.9-4ubuntu6), libgtk2.0-0 (>= 2.16.1-0ubuntu2), libasound2 (>= 1.0.18-1ubuntu9), libdb4.7 (>=4.7.25-6ubuntu1), libdb4.7++ (>=4.7.25-6ubuntu1) Replaces: pwr34,pwr39,pwr40,pwr41,pwr42,pwr43,pwr44,pwr45,pwr46,pwr47
Replaces: pwr34,pwr39,pwr40,pwr41,pwr42,pwr43,pwr44,pwr45,pwr46
Maintainer: Proview <postmaster@proview.se> Maintainer: Proview <postmaster@proview.se>
Description: Description:
Proview runtime environment Proview runtime environment
4.6.1-1 Base release 4.7.0-1 Base release
Package: pwrsev Package: pwrsev
Version: 4.6.1-1 Version: 4.7.0-1
Section: base Section: base
Priority: optional Priority: optional
Architecture: i386 Architecture: i386
Depends: libc6 (>= 2.8~20080505-0ubuntu7), libgtk2.0-0 (>= 2.14.4-0ubuntu1), libasound2 (>= 1.0.17-0ubuntu4), libdb4.7 (>=4.7.25-3), libmysqlclient15off (>= 5.0.51a-15) Depends: libc6 (>= 2.10.1-0ubuntu16), libgtk2.0-0 (>= 2.18.3-1ubuntu2.2), libasound2 (>= 1.0.20-3ubuntu6.1), libdb4.7 (>=4.7.25-7ubuntu2), libmysqlclient15off (>= 5.1.30really5.0.83-0ubuntu3)
Depends: libc6 (>= 2.9-4ubuntu6), libgtk2.0-0 (>= 2.16.1-0ubuntu2), libasound2 (>= 1.0.18-1ubuntu9), libdb4.7 (>=4.7.25-6ubuntu1), libmysqlclient15off (>= 5.1.30really5.0.75-0ubuntu10) Replaces: pwr34,pwr39,pwr40,pwr41,pwr42,pwr43,pwr44,pwr45,pwr46,pwr47
Replaces: pwr34,pwr39,pwr40,pwr41,pwr42,pwr43,pwr44,pwr45,pwr46
Maintainer: Proview <postmaster@proview.se> Maintainer: Proview <postmaster@proview.se>
Description: Description:
Proview storage environment Proview storage environment
4.6.1-1 Base release 4.7.0-1 Base release
if [ "$pwra_db" == "" ]; then
source /etc/pwrp_profile
fi
pwrp()
{
source $pwra_db/pwra_env.sh $@
}
alias sdf="source $pwra_db/pwra_env.sh set project"
alias pwrc="wb_cmd"
alias pwrs="wb_start.sh pwrp pwrp"
alias pwra="wb -p pwrp pwrp"
1
100 V2.0.0
101 24
2
200 common
201 0
202 1
203 15
204
3
300 pwrp
301 aaupl/kQs1p3U
302 4129168825
303 16
305
304 Proview project user
307
306
308
99
3
300 op1
301 aa.d10HWuKdCo
302 4294843775
303 17
305
304 Operator with Operator1 privilege
307
306
308
99
3
300 op2
301 aa.d10HWuKdCo
302 4294843711
303 18
305
304 Operator with Operator2 privilege
307
306
308
99
3
300 op3
301 aa.d10HWuKdCo
302 4294843583
303 19
305
304 Operator with Operator3 privilege
307
306
308
99
3
300 op4
301 aa.d10HWuKdCo
302 4294843327
303 20
305
304 Operator with Operator4 privilege
307
306
308
99
99
99
!**Menu ClassVolumes { //
!**Menu BaseClasses { //
NMps 0.0.1.1 PwrBase
TLog 0.0.1.2 PwrBase
SSAB 0.0.1.3 PwrBase
Remote 0.0.1.4 PwrBase
BaseComponent 0.0.0.10 PwrBase
Profibus 0.0.250.7 PwrBase
OtherManufacturer 0.2.250.1 PwrBase
ABB 0.0.250.2 PwrBase
Siemens 0.0.250.3 PwrBase
Telemecanique 0.0.250.4 PwrBase
SsabOx 0.0.250.5 PwrBase
KlocknerMoeller 0.0.250.6 PwrBase
Inor 0.0.250.8 PwrBase
!**}
!**}
#! /bin/bash
#
#
#
pwra_set_func()
{
local cmd
local baseroot
local project
if [ -z $1 ]; then
echo "Qualifier is missing"
return
fi
cmd="base"
if [ $1 = $cmd ] || [ ${cmd#$1} != $cmd ]; then
# Command is "set base"
basename=$2
basename=${basename//\./\\.}
baseroot=`eval cat $pwra_db/pwr_projectlist.dat | grep "\b"$basename"\b" | grep "\b"base"\b" | awk '{print $3}'`
if [ -z $baseroot ]; then
echo "Unable to find base '$2'"
return
fi
baseroot=${baseroot%/}
if [ ! -e "$baseroot" ]; then
echo "Base $baseroot doesn't exist"
else
if [ ! -e $baseroot/$os/$hw/exp/exe/pwrp_env.sh ]; then
echo "Not a base directory: $baseroot"
return
fi
source $baseroot/$os/$hw/exp/exe/pwrp_env.sh set baseroot $baseroot
fi
return
fi
cmd="baseroot"
if [ $1 = $cmd ] || [ ${cmd#$1} != $cmd ]; then
# Command is "set baseroot"
baseroot=$2
baseroot=${baseroot%/}
if [ ! -e "$baseroot" ]; then
echo "Base $baseroot doesn't exist"
else
if [ ! -e $baseroot/$os/$hw/exp/exe/pwrp_env.sh ]; then
echo "Not a base directory: $baseroot"
return
fi
source $baseroot/$os/$hw/exp/exe/pwrp_env.sh set baseroot $baseroot
fi
return
fi
cmd="project"
if [ $1 = $cmd ] || [ ${cmd#$1} != $cmd ]; then
# Command is "set project"
project=$2
basename=`eval cat $pwra_db/pwr_projectlist.dat | grep "^"$project"\b" | awk '{print $2}'`
basename=${basename//\./\\.}
if [ -z $basename ]; then
echo "Unable to find project '$2'"
return
fi
baseroot=`eval cat $pwra_db/pwr_projectlist.dat | grep "\b"$basename"\b" | grep "\b"base"\b" | awk '{print $3}'`
if [ -z $baseroot ]; then
echo "Unable to find base '$2'"
return
fi
baseroot=${baseroot%/}
if [ ! -e "$baseroot" ]; then
echo "Base $baseroot doesn't exist"
else
if [ ! -e $baseroot/$os/$hw/exp/exe/pwrp_env.sh ]; then
echo "Not a base directory: $baseroot"
return
fi
source $baseroot/$os/$hw/exp/exe/pwrp_env.sh set baseroot $baseroot
source $baseroot/$os/$hw/exp/exe/pwrp_env.sh set project $project
export PS1='\u@\h/$pwrp_projectname/-.\W> '
fi
return
fi
if [ -z $pwr_exe ]; then
echo "No project is defined"
return
fi
source $pwr_exe/pwrp_env.sh set $1 $2 $3
}
pwra_help_func()
{
source $pwr_exe/pwrp_env.sh $@
cat << EOF
pwra_env.sh - Utilities for pwr project environment
help - Display help
set base 'distribution' - Setup environment to proview base distribution
set baseroot 'root' - Setup environment to proview base distribution
EOF
}
pwra_parse ()
{
machine=`eval uname -m`
if [ "$machine" != "x86_64" ]; then
machine="x86"
fi
platform=$machine"_linux"
os="os_linux"
hw="hw_"$machine
#mysql_socket="--socket /var/lib/mysql/mysql.sock"
local cmd
cmd="help"
if [ -z $1 ] || [ $1 = $cmd ] || [ ${cmd#$1} != $cmd ]; then
pwra_help_func $2 $3
return
fi
cmd="set"
if [ $1 = $cmd ] || [ ${cmd#$1} != $cmd ]; then
pwra_set_func $2 $3
return
fi
if [ -z $pwr_exe ]; then
echo "No project is defined"
return
fi
source $pwr_exe/pwrp_env.sh $@
}
pwra_parse $@
# ~/.bash_profile: executed by bash(1) for login shells.
# see /usr/share/doc/bash/examples/startup-files for examples.
# the files are located in the bash-doc package.
umask 022
# the rest of this file is commented out.
# include .bashrc if it exists
if [ -f ~/.bashrc ]; then
source ~/.bashrc
fi
# set PATH so it includes user's private bin if it exists
#if [ -d ~/bin ] ; then
# PATH=~/bin:"${PATH}"
#fi
# ~/.bashrc: executed by bash(1) for non-login shells.
# see /usr/share/doc/bash/examples/startup-files for examples
source /etc/pwrp_profile
# If running interactively, then:
if [ "$PS1" ]; then
# enable color support of ls and also add handy aliases
eval `dircolors -b`
alias ls='ls --color=auto'
#alias ll='ls -l'
#alias la='ls -A'
#alias l='ls -CF'
#alias dir='ls --color=auto --format=vertical'
#alias vdir='ls --color=auto --format=long'
# set a fancy prompt
PS1='\u@\h:\w\$ '
# If this is an xterm set the title to user@host:dir
#case $TERM in
#xterm*)
# PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME}: ${PWD}\007"'
# ;;
#*)
# ;;
#esac
fi
!!
!! Root Menu Description for operator
!!
Menu DefaultRootMenu
{
"Operator Menu" f.title
"XTT OP-bilder" f.exec "~/.xtt_start &"
! "XTT" f.exec "~/.xtt_start &"
! "RTT" f.exec "/usr/bin/X11/xterm -T RTT -e ~/.rtt_start &"
"Xterm" f.exec "/usr/bin/X11/xterm -T XTerm -sb -right &"
"Klocka" f.exec "/usr/bin/X11/xclock &"
"Miniraknare" f.exec "/usr/bin/X11/xcalc &"
! "Shuffle Up" f.circle_up
! "Shuffle Down" f.circle_down
"Refresh" f.refresh
! "Pack Icons" f.pack_icons
! "Toggle Behavior..." f.set_behavior
no-label f.separator
! "Starta om X" f.restart
"Logga ut" f.quit_mwm
"Starta om dator" f.exec "/usr/bin/rebootreq &"
"Stang av dator" f.exec "/usr/bin/haltreq &"
}
!!
!! Default Window Menu
!!
Menu DefaultWindowMenu
{
"Make Pinned" f.toggle_pin_state
no-label f.separator
Restore _R Alt<Key>F5 f.restore
Move _M Alt<Key>F7 f.move
Size _S Alt<Key>F8 f.resize
Minimize _n Alt<Key>F9 f.minimize
Maximize _x Alt<Key>F10 f.maximize
Raise _a Alt<Key>F2 f.raise
Lower _L Alt<Key>F3 f.lower
no-label f.separator
Close _C Alt<Key>F4 f.kill
}
!!
!! Default Key Bindings
!!
Keys DefaultKeyBindings
{
Shift<Key>Escape window|icon f.post_wmenu
Alt<Key>space window|icon f.post_wmenu
Alt<Key>Tab root|icon|window f.next_key
Alt Shift<Key>Tab root|icon|window f.prev_key
Alt<Key>Escape root|icon|window f.circle_down
Alt Shift<Key>Escape root|icon|window f.circle_up
Alt Shift Ctrl<Key>exclam root|icon|window f.set_behavior
Alt<Key>F6 window f.next_key transient
Alt Shift<Key>F6 window f.prev_key transient
Shift<Key>F10 icon f.post_wmenu
Alt Shift<Key>Delete root|icon|window f.restart
}
!!
!! Button Binding Description(s)
!!
!! These can be used anywhere
!!
Buttons DefaultButtonBindings
{
<Btn1Down> icon|frame f.raise
<Btn3Down> icon|frame f.post_wmenu
<Btn3Down> root f.menu DefaultRootMenu
}
!!
!! These are some example bindings that you might use if your
!! keyboardFocusPolicy is "explicit". Note that to use these, you'll
!! have to change the Mwm*buttonBindings resource in Mwm to
!! ExplicitButtonBindings instead of DefaultButtonBindings.
!!
Buttons ExplicitButtonBindings
{
<Btn1Down> frame|icon f.raise
<Btn3Down> frame|icon f.post_wmenu
<Btn3Down> root f.menu DefaultRootMenu
! <Btn1Up> icon f.restore
Alt<Btn1Down> window|icon f.lower
! Alt<Btn2Down> window|icon f.resize
! Alt<Btn3Down> window|icon f.move
}
!! These are some example bindings that you might use if your
!! keyboardFocusPolicy is "pointer". Note that to use these, you'll
!! have to change the Mwm*buttonBindings resource in Mwm to
!! PointerButtonBindings instead of DefaultButtonBindings.
!!
Buttons PointerButtonBindings
{
<Btn1Down> frame|icon f.raise
<Btn3Down> frame|icon f.post_wmenu
<Btn3Down> root f.menu DefaultRootMenu
<Btn1Down> window f.raise
! <Btn1Up> icon f.restore
Alt<Btn1Down> window|icon f.lower
! Alt<Btn2Down> window|icon f.resize
! Alt<Btn3Down> window|icon f.move
}
!include-menu-defs
#Automatically generated file. Do not edit (see /usr/doc/menu/html/index.html)
Menu "/Debian/Apps/Editors"
{
"Editors" f.title
"Emacs 20" f.exec "/usr/bin/emacs20 &"
"NEdit" f.exec "/usr/bin/X11/nedit &"
"Xedit" f.exec "xedit &"
}
Menu "/Debian/Apps/Graphics"
{
"Graphics" f.title
"Bitmap" f.exec "bitmap &"
}
Menu "/Debian/Apps/Math"
{
"Math" f.title
"Xcalc" f.exec "xcalc &"
"bc" f.exec "x-terminal-emulator -T 'bc' -e /usr/bin/bc &"
"dc" f.exec "x-terminal-emulator -T 'dc' -e /usr/bin/dc &"
}
Menu "/Debian/Apps/Net"
{
"Net" f.title
"Lynx" f.exec "x-terminal-emulator -T 'Lynx' -e /usr/bin/lynx &"
"Telnet" f.exec "x-terminal-emulator -T 'Telnet' -e telnet &"
"Xbiff" f.exec "xbiff &"
}
Menu "/Debian/Apps/Programming"
{
"Programming" f.title
"Gdb" f.exec "x-terminal-emulator -T 'Gdb' -e /usr/bin/gdb &"
"Python (v2.1)" f.exec "x-terminal-emulator -T 'Python (v2.1)' -e /usr/bin/python2.1 &"
"Tclsh8.0" f.exec "x-terminal-emulator -T 'Tclsh8.0' -e /usr/bin/tclsh8.0 &"
"Tclsh8.2" f.exec "x-terminal-emulator -T 'Tclsh8.2' -e /usr/bin/tclsh8.2 &"
"Tclsh8.3" f.exec "x-terminal-emulator -T 'Tclsh8.3' -e /usr/bin/tclsh8.3 &"
"TkWish8.0" f.exec "x-terminal-emulator -T 'TkWish8.0' -e /usr/bin/wish8.0 &"
"TkWish8.3" f.exec "/usr/bin/wish8.3 &"
}
Menu "/Debian/Apps/Shells"
{
"Shells" f.title
"Bash" f.exec "x-terminal-emulator -T 'Bash' -e /bin/bash -login &"
"Sh" f.exec "x-terminal-emulator -T 'Sh' -e /bin/sh -login &"
"Tcsh" f.exec "x-terminal-emulator -T 'Tcsh' -e /usr/bin/tcsh &"
}
Menu "/Debian/Apps/System/Admin"
{
"Admin" f.title
"Lilo-config" f.exec "x-terminal-emulator -T 'Lilo-config' -e /usr/sbin/su-to-root -p root -c /usr/sbin/liloconfig &"
"gpm-config" f.exec "x-terminal-emulator -T 'gpm-config' -e /usr/sbin/su-to-root -p root -c /usr/sbin/gpmconfig &"
}
Menu "/Debian/Apps/System"
{
"System" f.title
"Admin" f.menu "/Debian/Apps/System/Admin"
"Task selector" f.exec "x-terminal-emulator -T 'Task selector' -e su-to-root /usr/bin/tasksel &"
"Top" f.exec "x-terminal-emulator -T 'Top' -e /usr/bin/top &"
"Xconsole" f.exec "xconsole &"
"Xload" f.exec "xload &"
"Xvidtune" f.exec "xvidtune &"
"pstree" f.exec "/etc/alternatives/x-terminal-emulator -e /usr/bin/pstree.x11 &"
}
Menu "/Debian/Apps/Tools"
{
"Tools" f.title
"Editres" f.exec "editres &"
"Oclock" f.exec "oclock &"
"X Window Snapshot" f.exec "xwd | xwud &"
"Xclipboard" f.exec "xclipboard &"
"Xclock (analog)" f.exec "xclock -analog &"
"Xclock (digital)" f.exec "xclock -digital -update 1 &"
"Xcutsel" f.exec "xcutsel &"
"Xev" f.exec "x-terminal-emulator -e xev &"
"Xfontsel" f.exec "xfontsel &"
"Xkill" f.exec "xkill &"
"Xmag" f.exec "xmag &"
"Xrefresh" f.exec "xrefresh &"
}
Menu "/Debian/Apps/Viewers"
{
"Viewers" f.title
"GV" f.exec "/usr/bin/X11/gv &"
"XDvi" f.exec "/usr/bin/xdvi &"
"Xditview" f.exec "xditview &"
}
Menu "/Debian/Apps"
{
"Apps" f.title
"Editors" f.menu "/Debian/Apps/Editors"
"Graphics" f.menu "/Debian/Apps/Graphics"
"Math" f.menu "/Debian/Apps/Math"
"Net" f.menu "/Debian/Apps/Net"
"Programming" f.menu "/Debian/Apps/Programming"
"Shells" f.menu "/Debian/Apps/Shells"
"System" f.menu "/Debian/Apps/System"
"Tools" f.menu "/Debian/Apps/Tools"
"Viewers" f.menu "/Debian/Apps/Viewers"
}
Menu "/Debian/Games/Toys"
{
"Toys" f.title
"Xeyes" f.exec "xeyes &"
"Xlogo" f.exec "xlogo &"
}
Menu "/Debian/Games"
{
"Games" f.title
"Toys" f.menu "/Debian/Games/Toys"
}
Menu "/Debian/Help"
{
"Help" f.title
"Info" f.exec "x-terminal-emulator -T 'Info' -e info &"
"Xman" f.exec "xman &"
}
Menu "/Debian/Screen/Root-window"
{
"Root-window" f.title
"Xsetroot" f.exec "xsetroot &"
}
Menu "/Debian/Screen/Save"
{
"Save" f.title
"Beforelight" f.exec "beforelight &"
}
Menu "/Debian/Screen"
{
"Screen" f.title
"Root-window" f.menu "/Debian/Screen/Root-window"
"Save" f.menu "/Debian/Screen/Save"
}
Menu "/Debian/XShells"
{
"XShells" f.title
"XTerm" f.exec "xterm &"
"XTerm (Unicode)" f.exec "uxterm &"
}
Menu "/Debian"
{
"Debian" f.title
"Apps" f.menu "/Debian/Apps"
"Games" f.menu "/Debian/Games"
"Help" f.menu "/Debian/Help"
"Screen" f.menu "/Debian/Screen"
"XShells" f.menu "/Debian/XShells"
}
#!/bin/bash
ource /etc/pwrp_profile
$pwr_exe/rt_rtt
xsetroot -solid darkcyan
xhost +localhost
~/.xtt_start
xset s off s noblank s noexpose -dpms
exec mwm
#!/bin/bash
source /etc/pwrp_profile
$pwr_exe/rt_xtt -u $USER -a &
#!/bin/bash
pf="ubu_x86_64"
aroot="/usr/pwrp/adm"
pkgroot=$pwre_broot/$pwre_target/bld/pkg/pwr$ver
pkgsrc=$pwre_sroot/tools/pkg/$pf/pwr
# Get version
if [ -e $pwr_inc/pwr_version.h ]; then
ver=`eval cat $pwr_inc/pwr_version.h | grep "\bpwrv_cWbdbVersionShortStr\b" | awk '{print $3}'`
if [ -z $ver ]; then
echo "Unable to get pwr version"
ver="V00"
fi
ver=${ver:2:2}
fi
# Generate version help file
{
if [ ! -e $pkgsrc/control ]; then
echo "Controlfile not found"
exit 1
fi
datfile=$pkgsrc/control
echo "<topic> version"
d=`eval date +\"%F %X\"`
{
let printout=0
while read line; do
if [ "${line:0:9}" = "Package: " ]; then
package=${line#Package: }
fi
if [ "${line:0:9}" = "Version: " ]; then
version=${line#Version: }
fi
if [ "${line:0:14}" = "Architecture: " ]; then
arch=${line#Architecture: }
fi
if [ "${line:0:12}" = "Description:" ]; then
echo ""
echo "<image> pwr_logga.gif"
echo ""
echo ""
echo ""
echo "<b>Proview V${version:0:3}"
echo "Version V$version"
echo ""
echo "Copyright 2004-${d:0:4} SSAB Oxelsund AB"
echo ""
echo "This program is free software; you can redistribute it and/or"
echo "modify it under the terms of the GNU General Public License as"
echo "published by the Free Software Foundation, either version 2 of"
echo "the License, or (at your option) any later version."
echo ""
echo "This program is distributed in the hope that it will be useful"
echo "but WITHOUT ANY WARRANTY; without even the implied warranty of"
echo "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
echo "For more details, see the"
echo "GNU General Public License. <weblink> http://www.proview.se/gpllicense.html"
echo ""
echo "E-mail postmaster@proview.se"
echo "Internet www.proview.se <link> http://www.proview.se/index.html"
echo ""
echo ""
echo "<b>Package"
echo "Package $package""_""$version""_""$arch"
echo "Build date $d"
echo "Package description:"
echo ""
printout=1
else
if [ $printout -eq 1 ]; then
echo $line
fi
fi
done
} < $datfile
echo "</topic>"
} > $pwr_eexe/wtt_version_help.dat
if [ "$1" == "-v" ]; then
exit
fi
echo "-- Building pwr$ver"
# Create directories
mkdir -p $pkgroot/DEBIAN
mkdir -p $pkgroot/usr/share/doc/pwr$ver
mkdir -p $pkgroot/usr/pwrp
mkdir -p $pkgroot/etc
find $pkgroot -type d | xargs chmod 755
# control
cp $pkgsrc/control $pkgroot/DEBIAN
echo "#!/bin/bash" > $pkgroot/DEBIAN/postinst
echo "ver=\"$ver\"" >> $pkgroot/DEBIAN/postinst
echo "pwre_target=\"$pwre_target\"" >> $pkgroot/DEBIAN/postinst
cat $pkgsrc/postinst >> $pkgroot/DEBIAN/postinst
chmod a+x $pkgroot/DEBIAN/postinst
cp $pkgsrc/prerm $pkgroot/DEBIAN
# copyright
cp $pkgsrc/copyright $pkgroot/usr/share/doc/pwr$ver
# changelog
cp $pkgsrc/changelog $pkgroot/usr/share/doc/pwr$ver
gzip -fq --best $pkgroot/usr/share/doc/pwr$ver/changelog
# changelog.Debian
cp $pkgsrc/changelog.Debian $pkgroot/usr/share/doc/pwr$ver
gzip -fq --best $pkgroot/usr/share/doc/pwr$ver/changelog.Debian
# Man pages
mkdir -p $pkgroot/usr/share/man/man1
cp $pkgsrc/pwr.1 $pkgroot/usr/share/man/man1/pwr.1
gzip -fq --best $pkgroot/usr/share/man/man1/pwr.1
# Copy proview
mkdir $pkgroot/usr/pwr$ver
currentdir="`eval pwd`"
tarfile=$pwre_broot/$pwre_target/bld/pkg/pwrtmp.tar
cd $pwre_broot
echo "-- copy release to package tree"
tar -cf $tarfile $pwre_target/exp
cd $pkgroot/usr/pwr$ver
tar -xf $tarfile
rm $tarfile
cd $currentdir
# Remove not needed libraries
rm $pkgroot/usr/pwr$ver/$pwre_target/exp/lib/libpwr_flow.a
rm $pkgroot/usr/pwr$ver/$pwre_target/exp/lib/libpwr_ge.a
rm $pkgroot/usr/pwr$ver/$pwre_target/exp/lib/libpwr_glow.a
rm $pkgroot/usr/pwr$ver/$pwre_target/exp/lib/libpwr_tlog.a
rm $pkgroot/usr/pwr$ver/$pwre_target/exp/lib/libpwr_wb.a
rm $pkgroot/usr/pwr$ver/$pwre_target/exp/lib/libpwr_xtt.a
# Copy configuration files to cnf
cp $pkgsrc/proview.cnf $pkgroot/usr/pwr$ver/$pwre_target/exp/cnf
cp $pkgsrc/pwrp_profile $pkgroot/etc
chmod a+x $pkgroot/etc/pwrp_profile
# Copy adm files to cnf
cp $pwre_sroot/tools/pkg/deb/adm/pwr_setup.sh $pkgroot/usr/pwr$ver/$pwre_target/exp/cnf
echo "pwrp set base V${ver:0:1}.${ver:1:1}" >> $pkgroot/usr/pwr$ver/$pwre_target/exp/cnf/pwr_setup.sh
chmod a+x $pkgroot/usr/pwr$ver/$pwre_target/exp/cnf/pwr_setup.sh
cp $pwre_sroot/tools/pkg/deb/adm/pwra_env.sh $pkgroot/usr/pwr$ver/$pwre_target/exp/cnf
chmod a+x $pkgroot/usr/pwr$ver/$pwre_target/exp/cnf/pwra_env.sh
cp $pwre_sroot/tools/pkg/deb/adm/pwr_volumelist.dat $pkgroot/usr/pwr$ver/$pwre_target/exp/cnf
cp $pwre_sroot/tools/pkg/deb/adm/pwr_user2.dat $pkgroot/usr/pwr$ver/$pwre_target/exp/cnf
cp $pwre_sroot/tools/pkg/deb/adm/proview_icon.png $pkgroot/usr/pwr$ver/$pwre_target/exp/cnf
# Copy user to cnf
mkdir $pkgroot/usr/pwr$ver/$pwre_target/exp/cnf/user
cp $pwre_sroot/tools/pkg/deb/user/.bashrc $pkgroot/usr/pwr$ver/$pwre_target/exp/cnf/user
echo "source $aroot/db/pwr_setup.sh" >> $pkgroot/usr/pwr$ver/$pwre_target/exp/cnf/user/.bashrc
cp $pwre_sroot/tools/pkg/deb/user/.bash_profile $pkgroot/usr/pwr$ver/$pwre_target/exp/cnf/user
#cp $pwre_sroot/tools/pkg/deb/user/.mwmrc $pkgroot/usr/pwr$ver/$pwre_target/exp/cnf/user
cp $pwre_sroot/tools/pkg/deb/user/.rtt_start $pkgroot/usr/pwr$ver/$pwre_target/exp/cnf/user
cp $pwre_sroot/tools/pkg/deb/user/.xtt_start $pkgroot/usr/pwr$ver/$pwre_target/exp/cnf/user
#cp $pwre_sroot/tools/pkg/deb/user/.xsession $pkgroot/usr/pwr$ver/$pwre_target/exp/cnf/user
cp $pwre_sroot/tools/pkg/deb/user/wtt_init.pwr_com $pkgroot/usr/pwr$ver/$pwre_target/exp/cnf/user
cp $pwre_sroot/tools/pkg/deb/user/wtt_init1.pwr_com $pkgroot/usr/pwr$ver/$pwre_target/exp/cnf/user
# Generate desktop file
{
echo "[Desktop Entry]"
echo "Version=1.0"
echo "Encoding=UTF-8"
echo "Name=Proview V${version:0:3}"
echo "Type=Application"
echo "Comment=Start Proview"
echo "Exec=xterm -title \"Proview Development Console\" -e 'export pwra_db=$aroot/db;source \$pwra_db/pwra_env.sh set base V""${version:0:3}"";source \$pwra_db/pwra_env.sh set bus;wb -p pwrp pwrp'"
echo "Icon=$aroot/db/proview_icon.png"
echo "Categories=GNOME;GTK;Application;"
} > $pkgroot/usr/pwr$ver/$pwre_target/exp/cnf/user/proview$ver.desktop
# Create package
echo "-- Building package"
if which fakeroot > /dev/null; then
fakeroot dpkg -b $pkgroot $pwre_broot/$pwre_target/bld/pkg
else
dpkg -b $pkgroot $pwre_broot/$pwre_target/bld/pkg
fi
rm -r $pkgroot
Proview V3.4b (3.4.1-1)
\ No newline at end of file
Proview. See also normal changelog file.
\ No newline at end of file
Package: pwr47
Version: 4.7.0-1
Section: base
Priority: optional
Architecture: amd64
Depends: libc6 (>= 2.10.1-0ubuntu16), libgtk2.0-0 (>= 2.18.3-1ubuntu2.2), libasound2 (>= 1.0.20-3ubuntu6.1), libdb4.7 (>=4.7.25-7ubuntu2), libdb4.7++ (>=4.7.25-7ubuntu2), libmysqlclient15off (>= 5.1.30really5.0.83-0ubuntu3), g++ (>= 4:4.4.1-1ubuntu2)
Replaces: pwrrt,pwr34,pwr39,pwr40,pwr41,pwr42,pwr43,pwr44,pwr45,pwr46
Maintainer: Proview <postmaster@proview.se>
Description: Proview development and runtime environment package
Proview development and runtime environment
4.7.0-1 Base release
Proview
Copyright: SSAB Oxelsund AB <ssabox.com>
2003-11-21
The home page of Proview is at:
http://www.proview.se
#!/bin/bash
set -e
# ver=""
# pwre_target=""
echo "Executing postinst"
# Automatically added by dh_installdocs
if [ "$1" = "configure" ]; then
if [ -d /usr/doc -a ! -e /usr/doc/pwrtest -a -d /usr/share/doc/pwrtest ]; then
ln -sf ../share/doc/pwrtest /usr/doc/pwrtest
fi
fi
# End automatically added section
aroot="/usr/pwrp/adm"
vermajor=${ver:0:1}
verminor=${ver:1:1}
verstr="V$vermajor.$verminor"
# Create group pwrp
if ! grep -q "\bpwrp:" /etc/group; then
echo "-- Add group pwrp"
groupadd pwrp
fi
if ! grep -q "\bpwrp:" /etc/passwd; then
echo "-- Add user pwrp"
new_user=1
useradd -s /bin/bash -p aaupl/kQs1p3U -g pwrp -d /home/pwrp pwrp
if [ ! -e /home/pwrp ]; then
mkdir /home/pwrp
fi
cp /usr/pwr$ver/$pwre_target/exp/cnf/user/.bashrc /home/pwrp
cp /usr/pwr$ver/$pwre_target/exp/cnf/user/.bash_profile /home/pwrp
# cp /usr/pwr$ver/$pwre_target/exp/cnf/user/.mwmrc /home/pwrp
cp /usr/pwr$ver/$pwre_target/exp/cnf/user/.rtt_start /home/pwrp
chmod a+x /home/pwrp/.rtt_start
cp /usr/pwr$ver/$pwre_target/exp/cnf/user/.xtt_start /home/pwrp
chmod a+x /home/pwrp/.xtt_start
# cp /usr/pwr$ver/$pwre_target/exp/cnf/user/.xsession /home/pwrp
cp /usr/pwr$ver/$pwre_target/exp/cnf/user/wtt_init.pwr_com /home/pwrp
cp /usr/pwr$ver/$pwre_target/exp/cnf/user/wtt_init1.pwr_com /home/pwrp
chown -R pwrp /home/pwrp
chgrp -R pwrp /home/pwrp
fi
if [ ! -e /home/pwrp/Desktop ]; then
mkdir /home/pwrp/Desktop
fi
cp /usr/pwr$ver/$pwre_target/exp/cnf/user/proview$ver.desktop /home/pwrp/Desktop
chown pwrp:pwrp /home/pwrp/Desktop/proview$ver.desktop
chmod a+x /home/pwrp/Desktop/proview$ver.desktop
echo "Change owner of files to pwrp"
chown -R pwrp /usr/pwr$ver
chgrp -R pwrp /usr/pwr$ver
chmod u+s /usr/pwr$ver/$pwre_target/exp/exe/rt_ini
chmod u+s /usr/pwr$ver/$pwre_target/exp/exe/rt_rtt
chmod u+s /usr/pwr$ver/$pwre_target/exp/exe/rt_xtt
chmod u+s /usr/pwr$ver/$pwre_target/exp/exe/rt_bck
# Copy configuration files
new_cnf=0
if [ ! -e /etc/proview.cnf ]; then
cp /usr/pwr$ver/$pwre_target/exp/cnf/proview.cnf /etc
new_cnf=1
fi
# Add pwrp_profile to profile
if ! grep -q "/etc/pwrp_profile\b" /etc/profile; then
cat >> /etc/profile <<-EOF
if [ -e /etc/pwrp_profile ]; then
source /etc/pwrp_profile
fi
EOF
fi
# Create and copy adm
if [ ! -e $aroot/db ]; then
mkdir -p $aroot/db
fi
cp /usr/pwr$ver/$pwre_target/exp/cnf/pwra_env.sh $aroot/db
cp /usr/pwr$ver/$pwre_target/exp/cnf/pwr_setup.sh $aroot/db
cp /usr/pwr$ver/$pwre_target/exp/cnf/proview_icon.png $aroot/db
if [ ! -e $aroot/db/pwr_volumelist.dat ]; then
cp /usr/pwr$ver/$pwre_target/exp/cnf/pwr_volumelist.dat $aroot/db
fi
if [ ! -e $aroot/db/pwr_user2.dat ]; then
cp /usr/pwr$ver/$pwre_target/exp/cnf/pwr_user2.dat $aroot/db
fi
# Insert base in projectlist
if [ ! -e $aroot/db/pwr_projectlist.dat ]; then
echo "%base $verstr /usr/pwr$ver" > $aroot/db/pwr_projectlist.dat
else
set +e
ptst=`eval grep "^%base" $aroot/db/pwr_projectlist.dat | grep "\b$verstr\b"`
set -e
if [ "$ptst" = "" ]; then
echo "%base $verstr /usr/pwr$ver" >> $aroot/db/pwr_projectlist.dat
fi
fi
# Change group to pwrp
chgrp pwrp $aroot
chmod g+w $aroot
chgrp -R pwrp $aroot/*
chmod -R g+w $aroot/*
chmod a+w /usr/pwr$ver/$pwre_target/exp/load/*.dbs
# Create project root
if [ ! -e /usr/local/pwrp ]; then
mkdir /usr/local/pwrp
chgrp pwrp /usr/local/pwrp
chmod g+w /usr/local/pwrp
fi
#!/bin/bash
set -e
echo "Here in prerm..."
# Automatically added by dh_installdocs
if [ \( "$1" = "upgrade" -o "$1" = "remove" \) -a -L /usr/doc/pwrtest ]; then
rm -f /usr/doc/pwrtest
fi
# End automatically added section
#
# Configuration file for Proview
#
# Default QCOM Bus Id
#
qcomBusId 999
#
# Web directory
#
webDirectory /var/www
PWR(1) Proview Manuals PWR(1)
NAME
pwr - start and stop Proview runtime environment
SYNOPSIS
pwr [start][stop]
DESCRIPTION
Start and stop command for Proview runtime environment.
OPTIONS
start Start Proview runtime environment.
stop Stop Proview runtime environment.
FILES
/etc/pwrp_profile
The system wide configuration file..
AUTHOR
Written by CS.
SEE ALSO
pwr(5)
Proview Last change: Nov 2003
bus_id=""
if [ -e /etc/proview.cnf ]; then
bus_id=`eval cat /etc/proview.cnf | grep "\\bqcomBusId\\b" | awk '{print $2}'`
fi
if [ -e /etc/proview.cnf ]; then
web_dir=`eval cat /etc/proview.cnf | grep "\\bwebDirectory\\b" | awk '{print $2}'`
fi
export PWR_BUS_ID=$bus_id
export pwrb_root=/usr/pwrrt
export pwrp_root=/pwrp
export pwr_exe=$pwrb_root/exe
export pwr_lib=$pwrb_root/lib
export pwr_obj=$pwrb_root/obj
export pwr_inc=$pwrb_root/inc
export pwr_load=$pwrb_root/load
export pwr_lis=$pwrb_root/lis
export pwrp_exe=$pwrp_root/x86_linux/exe
export pwrp_lib=$pwrp_root/x86_linux/lib
export pwrp_obj=$pwrp_root/x86_linux/obj
export pwrp_lis=$pwrp_root/x86_linux/lis
export pwrp_inc=$pwrp_root/common/inc
export pwrp_load=$pwrp_root/common/load
export pwrp_log=$pwrp_root/common/log
export pwrp_db=$pwrp_root/common/db
export pwrp_web=$web_dir
export pwra_db=/usr/pwrp/adm/db
jdk=`eval ls /usr/local | grep ^jre`
export jdk_home=/usr/local/$jdk/bin
PATH=$PATH:$pwr_exe:$pwrp_exe:$jdk_home
#Set display to remote computer
export DISPLAY=$REMOTEHOST:0.0
#symbols to define start/stop commands for PWR
alias pwr_stop='/etc/init.d/pwr stop'
alias pwr_stop.sh="/etc/init.d/pwr stop"
alias pwr_start="/etc/init.d/pwr start"
alias pwr="/etc/init.d/pwr"
alias boot="/usr/bin/sudo /sbin/reboot"
#!/bin/bash
pf="ubu_x86_64"
aroot="/usr/pwrp/adm"
# Get version
if [ -e $pwr_inc/pwr_version.h ]; then
ver=`eval cat $pwr_inc/pwr_version.h | grep "\bpwrv_cWbdbVersionShortStr\b" | awk '{print $3}'`
if [ -z $ver ]; then
echo "Unable to get pwr version"
ver="V00"
fi
ver=${ver:2:2}
fi
proot=/data0/pwrp/pwrdemo$ver
pkgroot=$pwre_broot/$pwre_target/bld/pkg/pwrdemo$ver
pkgsrc=$pwre_sroot/tools/pkg/$pf/pwrdemo
echo "-- Building pwrdemo$ver"
# Create directories
mkdir -p $pkgroot/DEBIAN
mkdir -p $pkgroot/usr/share/doc/pwrdemo$ver
mkdir -p $pkgroot/usr/pwrp
find $pkgroot -type d | xargs chmod 755
# control
cp $pkgsrc/control $pkgroot/DEBIAN
echo "#!/bin/bash" > $pkgroot/DEBIAN/postinst
echo "ver=\"$ver\"" >> $pkgroot/DEBIAN/postinst
echo "pwre_target=\"$pwre_target\"" >> $pkgroot/DEBIAN/postinst
cat $pkgsrc/postinst >> $pkgroot/DEBIAN/postinst
chmod a+x $pkgroot/DEBIAN/postinst
echo "#!/bin/sh" > $pkgroot/DEBIAN/prerm
echo "ver=\"$ver\"" >> $pkgroot/DEBIAN/prerm
cat $pkgsrc/prerm >> $pkgroot/DEBIAN/prerm
chmod a+x $pkgroot/DEBIAN/prerm
# copyright
cp $pkgsrc/copyright $pkgroot/usr/share/doc/pwrdemo$ver
# changelog
cp $pkgsrc/changelog $pkgroot/usr/share/doc/pwrdemo$ver
gzip -fq --best $pkgroot/usr/share/doc/pwrdemo$ver/changelog
# changelog.Debian
cp $pkgsrc/changelog.Debian $pkgroot/usr/share/doc/pwrdemo$ver
gzip -fq --best $pkgroot/usr/share/doc/pwrdemo$ver/changelog.Debian
# Man pages
# Copy pwrdemo
mkdir $pkgroot/usr/pwrp/pwrdemo$ver
mkdir $pkgroot/usr/pwrp/pwrdemo$ver/cnf
currentdir="`eval pwd`"
tarfile=$pwre_broot/$pwre_target/bld/pkg/pwrtmp.tar
cd $proot
cd ..
echo "-- copy project to package tree"
tar -cf $tarfile pwrdemo$ver
cd $pkgroot/usr/pwrp
tar -xf $tarfile
rm $tarfile
rm -r pwrdemo$ver/.git
cd $currentdir
# Generate desktop file
{
echo "[Desktop Entry]"
echo "Version=1.0"
echo "Encoding=UTF-8"
echo "Name=Proview Demo"
echo "Type=Application"
echo "Comment=Start Proview Demo"
echo "Exec=xterm -title \"Proview Demo Console\" -e 'export pwra_db=$aroot/db;source \$pwra_db/pwr_setup.sh;source \$pwra_db/pwra_env.sh set project pwrdemo""$ver"";export PWR_BUS_ID=999;pwr_rtmon'"
echo "Icon=$aroot/db/proview_icon.png"
echo "Categories=GNOME;GTK;Application;"
} > $pkgroot/usr/pwrp/pwrdemo$ver/cnf/proviewdemo$ver.desktop
# Create package
echo "-- Building package"
if which fakeroot > /dev/null; then
fakeroot dpkg -b $pkgroot $pwre_broot/$pwre_target/bld/pkg
else
dpkg -b $pkgroot $pwre_broot/$pwre_target/bld/pkg
fi
rm -r $pkgroot
Proview V3.4b (3.4.1-1)
\ No newline at end of file
Proview. See also normal changelog file.
\ No newline at end of file
Package: pwrdemo47
Version: 4.7.0-1
Section: base
Priority: optional
Architecture: amd64
Depends: pwr47 (>= 4.7.0-1)
Replaces:
Maintainer: Proview <postmaster@proview.se>
Description: Proview Demo Project package
Proview Demo Project
4.7.0-1 Base release
Proview
Copyright: SSAB Oxelsund AB <ssabox.com>
2003-11-21
The home page of Proview is at:
http://www.proview.se
#!/bin/bash
#
set -e
# Added by build.sh :
# ver=""
# pwre_target=""
#
echo "Here in postinst..."
# Automatically added by dh_installdocs
if [ "$1" = "configure" ]; then
if [ -d /usr/doc -a ! -e /usr/doc/pwrtest -a -d /usr/share/doc/pwrtest ]; then
ln -sf ../share/doc/pwrtest /usr/doc/pwrtest
fi
fi
# End automatically added section
aroot="/usr/pwrp/adm"
export pwra_db=$aroot/db
echo "Change owner of files to pwrp"
chown -R pwrp:pwrp /usr/pwrp/pwrdemo$ver
# Register volume
if [ -e $aroot/db/pwr_volumelist.dat ]; then
set +e
ptst=`eval grep "'\bVolPwrDemo\b'" $aroot/db/pwr_volumelist.dat | grep "\bpwrdemo\b"`
set -e
if [ "$ptst" = "" ]; then
echo " VolPwrDemo 0.254.254.200 pwrdemo" >> $aroot/db/pwr_volumelist.dat
fi
fi
# Insert base in projectlist
if [ -e $aroot/db/pwr_projectlist.dat ]; then
set +e
ptst=`eval grep "'\bpwrdemo$ver\b'" $aroot/db/pwr_projectlist.dat`
set -e
if [ "$ptst" = "" ]; then
echo "pwrdemo$ver V${ver:0:1}.${ver:1:1} /usr/pwrp/pwrdemo$ver pwrdemo$ver \"\" " >> $aroot/db/pwr_projectlist.dat
fi
fi
# Insert nodename in DirectoryVolume and create bootfile
nodename=`eval uname -n`
initsh=/tmp/pwrdemo_init.sh
initpwrc=/tmp/pwrdemo_init.pwr_com
# Create a shellscript that attaches to projects and runs wb_cmd
cat > $initsh <<EOF
#!/bin/bash
source $aroot/db/pwr_setup.sh
source \$pwr_exe/pwrp_env.sh set project pwrdemo$ver
wb_cmd @$initpwrc
EOF
chmod a+x $initsh
# Create a wb_cmd script that inserts nodename and creates bootfile
cat > $initpwrc <<EOF
set attr/name=Bus999-DemoNode/attr=NodeName/value="$nodename"/noconf
save
create boot/node=DemoNode
exit
EOF
# Execute shellscript
sudo -u pwrp $initsh
rm $initsh
rm $initpwrc
if [ -e /home/pwrp/Desktop ]; then
cp /usr/pwrp/pwrdemo$ver/cnf/proviewdemo$ver.desktop /home/pwrp/Desktop/
chown pwrp:pwrp /home/pwrp/Desktop/proviewdemo$ver.desktop
chmod a+x /home/pwrp/Desktop/proviewdemo$ver.desktop
fi
#!/bin/bash
#
# ver='version' is added by build.sh
#
set -e
echo "Here in prerm..."
# Automatically added by dh_installdocs
if [ \( "$1" = "upgrade" -o "$1" = "remove" \) -a -L /usr/doc/pwrtest ]; then
rm -f /usr/doc/pwrtest
fi
# End automatically added section
if [ -e /usr/pwrp/pwrdemo$ver ]; then
rm -r /usr/pwrp/pwrdemo$ver
fi
#!/bin/bash
pf="ubu_x86_64"
# Get version
if [ -e $pwr_inc/pwr_version.h ]; then
ver=`eval cat $pwr_inc/pwr_version.h | grep "\bpwrv_cWbdbVersionShortStr\b" | awk '{print $3}'`
if [ -z $ver ]; then
echo "Unable to get pwr version"
ver="V00"
fi
ver=${ver:2:2}
fi
# Generate version help file
{
if [ ! -e $pwre_sroot/tools/pkg/$pf/pwrrt/control ]; then
echo "Controlfile not found"
exit 1
fi
datfile=$pwre_sroot/tools/pkg/$pf/pwrrt/control
echo "<topic> version"
d=`eval date +\"%F %X\"`
{
let printout=0
while read line; do
if [ "${line:0:9}" = "Package: " ]; then
package=${line#Package: }
fi
if [ "${line:0:9}" = "Version: " ]; then
version=${line#Version: }
fi
if [ "${line:0:14}" = "Architecture: " ]; then
arch=${line#Architecture: }
fi
if [ "${line:0:12}" = "Description:" ]; then
echo ""
echo "<image> pwr_logga.gif"
echo ""
echo ""
echo ""
echo "<b>Proview V${version:0:3}"
echo "Version V$version"
echo ""
echo "Copyright 2004-${d:0:4} SSAB Oxelsund AB"
echo ""
echo "This program is free software; you can redistribute it and/or"
echo "modify it under the terms of the GNU General Public License as"
echo "published by the Free Software Foundation, either version 2 of"
echo "the License, or (at your option) any later version."
echo ""
echo "This program is distributed in the hope that it will be useful"
echo "but WITHOUT ANY WARRANTY; without even the implied warranty of"
echo "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
echo "For more details, see the"
echo "GNU General Public License. <weblink> http://www.proview.se/gpllicense.html"
echo ""
echo "E-mail postmaster@proview.se <weblink> mailto:postmaster@proview.se"
echo "Internet www.proview.se <weblink> http://www.proview.se"
echo ""
echo ""
echo "<b>Package"
echo "Package $package""_""$version""_""$arch"
echo "Build date $d"
echo "Package description:"
echo ""
printout=1
else
if [ $printout -eq 1 ]; then
echo $line
fi
fi
done
} < $datfile
echo "</topic>"
} > $pwr_eexe/xtt_version_help.dat
# Convert to html
co_convert -t -d $pwr_doc $pwr_eexe/xtt_version_help.dat
# Print rt version file
echo "Version: $version" > $pwr_eexe/rt_version.dat
if [ "$1" == "-v" ]; then
exit
fi
pkgroot=$pwre_broot/$pwre_target/bld/pkg/pwrrt
pkgsrc=$pwre_sroot/tools/pkg/$pf/pwrrt
# Create directories
echo "-- Create package tree"
mkdir -p $pkgroot/DEBIAN
mkdir -p $pkgroot/usr/share/doc/pwrrt
mkdir -p $pkgroot/etc/init.d
find $pkgroot -type d | xargs chmod 755
# control
cp $pkgsrc/control $pkgroot/DEBIAN
cp $pkgsrc/postinst $pkgroot/DEBIAN
cp $pkgsrc/prerm $pkgroot/DEBIAN
# copyright
cp $pkgsrc/copyright $pkgroot/usr/share/doc/pwrrt
# changelog
cp $pkgsrc/changelog $pkgroot/usr/share/doc/pwrrt
gzip -fq --best $pkgroot/usr/share/doc/pwrrt/changelog
# changelog.Debian
cp $pkgsrc/changelog.Debian $pkgroot/usr/share/doc/pwrrt
gzip -fq --best $pkgroot/usr/share/doc/pwrrt/changelog.Debian
# Startup files
cp $pkgsrc/pwrp_profile $pkgroot/etc
chmod a+x $pkgroot/etc/pwrp_profile
cp $pkgsrc/pwr $pkgroot/etc/init.d
chmod a+x $pkgroot/etc/init.d/pwr
#cp $pkgsrc/gdhserver $pkgroot/etc/init.d
#chmod a+x $pkgroot/etc/init.d/gdhserver
# Man pages
mkdir -p $pkgroot/usr/share/man/man1
cp $pkgsrc/pwr.1 $pkgroot/usr/share/man/man1/pwr.1
gzip -fq --best $pkgroot/usr/share/man/man1/pwr.1
cp $pkgsrc/rt_ini.1 $pkgroot/usr/share/man/man1/rt_ini.1
gzip -fq --best $pkgroot/usr/share/man/man1/rt_ini.1
cp $pkgsrc/rt_xtt.1 $pkgroot/usr/share/man/man1/rt_xtt.1
gzip -fq --best $pkgroot/usr/share/man/man1/rt_xtt.1
cp $pkgsrc/rt_rtt.1 $pkgroot/usr/share/man/man1/rt_rtt.1
gzip -fq --best $pkgroot/usr/share/man/man1/rt_rtt.1
# Copy proview
mkdir $pkgroot/usr/pwrrt
currentdir="`eval pwd`"
tarfile=$pwre_broot/$pwre_target/bld/pkg/pwrtmp.tar
cd $pwre_broot/$pwre_target/exp
echo "-- Copy release to package tree"
tar -cf $tarfile *
cd $pkgroot/usr/pwrrt
tar -xf $tarfile
rm $tarfile
rm -r $pkgroot/usr/pwrrt/lib/*.a
rm -r $pkgroot/usr/pwrrt/exe/wb*
cp $pwr_eexe/wb_distr_keepboot.sh $pkgroot/usr/pwrrt/exe
cd $currentdir
# Copy configuration files to cnf
cp $pkgsrc/proview.cnf $pkgroot/usr/pwrrt/cnf
# Copy op to cnf
mkdir $pkgroot/usr/pwrrt/cnf/op
cp $pwre_sroot/tools/pkg/$pf/op/.bashrc $pkgroot/usr/pwrrt/cnf/op
cp $pwre_sroot/tools/pkg/$pf/op/.bash_profile $pkgroot/usr/pwrrt/cnf/op
#cp $pwre_sroot/tools/pkg/$pf/op/.mwmrc $pkgroot/usr/pwrrt/cnf/op
cp $pwre_sroot/tools/pkg/$pf/op/.rtt_start $pkgroot/usr/pwrrt/cnf/op
cp $pwre_sroot/tools/pkg/$pf/op/.xtt_start $pkgroot/usr/pwrrt/cnf/op
#cp $pwre_sroot/tools/pkg/$pf/op/.xsession $pkgroot/usr/pwrrt/cnf/op
# Copy user to cnf
mkdir $pkgroot/usr/pwrrt/cnf/user
cp $pwre_sroot/tools/pkg/$pf/user/.bashrc $pkgroot/usr/pwrrt/cnf/user
cp $pwre_sroot/tools/pkg/$pf/user/.bash_profile $pkgroot/usr/pwrrt/cnf/user
#cp $pwre_sroot/tools/pkg/$pf/user/.mwmrc $pkgroot/usr/pwrrt/cnf/user
cp $pwre_sroot/tools/pkg/$pf/user/.rtt_start $pkgroot/usr/pwrrt/cnf/user
cp $pwre_sroot/tools/pkg/$pf/user/.xtt_start $pkgroot/usr/pwrrt/cnf/user
#cp $pwre_sroot/tools/pkg/$pf/user/.xsession $pkgroot/usr/pwrrt/cnf/user
# Create package
echo "-- Building package"
if which fakeroot > /dev/null; then
fakeroot dpkg -b $pkgroot $pwre_broot/$pwre_target/bld/pkg
else
dpkg -b $pkgroot $pwre_broot/$pwre_target/bld/pkg
fi
rm -r $pkgroot
Proview V3.4b (3.4.1-1)
\ No newline at end of file
Proview. See also normal changelog file.
\ No newline at end of file
Package: pwrrt
Version: 4.7.0-1
Section: base
Priority: optional
Architecture: amd64
Depends: libc6 (>= 2.10.1-0ubuntu16), libgtk2.0-0 (>= 2.18.3-1ubuntu2.2), libasound2 (>= 1.0.20-3ubuntu6.1), libdb4.7 (>=4.7.25-7ubuntu2)
Replaces: pwr34,pwr39,pwr40,pwr41,pwr42,pwr43,pwr44,pwr45,pwr46,pwr47
Maintainer: Proview <postmaster@proview.se>
Description:
Proview runtime environment
4.7.0-1 Base release
Proview
Copyright: SSAB Oxelsund AB <ssabox.com>
2003-11-21
The home page of Proview is at:
http://www.proview.se
#!/bin/bash
#
# Startscript fr PWR av Ulf Ljungdahl
#
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/jdk1.3/bin/java
. /etc/pwrp_profile
gdh_start()
{
export LD_LIBRARY_PATH=$pwr_exe
export CLASSPATH=$pwr_lib/pwr_rt.jar:$pwr_lib/pwr_jop.jar
sleep 5
sudo -u pwrp $pwr_exe/rt_webmon.sh &
sleep 2
sudo -u pwrp $pwr_exe/rt_webmonmh.sh &
#su pwrp <java jpwr.rt.GdhServer &
#sudo -u pwrp java jpwr.rt.GdhServer &
}
gdh_stop()
{
kill -9 `ps ax | grep "java" | awk '{ print $1}'`
}
case "$1"
in
start)
echo "Startar GDH server..."
#if [ 'test -x ps aux | grep plc | grep -v grep' ]
# then
# echo "PWR kr, stoppar det frst.."
# pwr_stop
# fi
gdh_start
echo "Klar."
;;
stop)
echo "Stoppar GDH server..."
gdh_stop
echo "Klar"
;;
restart)
echo "Startar om GDH server."
echo "Stoppar det frst."
gdh_stop
sleep 1
echo "Startar igen."
gdh_start
echo "Klar."
;;
*)
echo "Usage:{start|stop|restart}" >&2
#echo "Ingen parameter angiven, startar PWR"
#$0 start
exit 1
;;
esac
exit 0
#!/bin/bash
set -e
if [ "$pwrrt_xtrace" != "" ]; then
set -o xtrace
fi
# Automatically added by dh_installdocs
if [ "$1" = "configure" ]; then
if [ -d /usr/doc -a ! -e /usr/doc/pwrtest -a -d /usr/share/doc/pwrtest ]; then
ln -sf ../share/doc/pwrtest /usr/doc/pwrtest
fi
fi
# End automatically added section
proot="/pwrp"
aroot="/usr/pwrp/adm"
# Create users...
new_user=0
if ! grep -q "\bpwrp:" /etc/group; then
echo "-- Add group pwrp"
groupadd pwrp
fi
if ! grep -q "\bb55:" /etc/group; then
echo "-- Add group b55"
groupadd b55
fi
if ! grep -q "\bb66:" /etc/group; then
echo "-- Add group b66"
groupadd b66
fi
if ! grep -q "\bskiftel:" /etc/group; then
echo "-- Add group skiftel"
groupadd skiftel
fi
if ! grep -q "\bpwrp:" /etc/passwd; then
echo "-- Add user pwrp"
new_user=1
useradd -s /bin/bash -p aaupl/kQs1p3U -g pwrp -G b55,b66,skiftel -d /home/pwrp pwrp
if [ ! -e /home/pwrp ]; then
mkdir /home/pwrp
fi
cp /usr/pwrrt/cnf/user/.bashrc /home/pwrp
cp /usr/pwrrt/cnf/user/.bash_profile /home/pwrp
# cp /usr/pwrrt/cnf/user/.mwmrc /home/pwrp
cp /usr/pwrrt/cnf/user/.rtt_start /home/pwrp
chmod a+x /home/pwrp/.rtt_start
cp /usr/pwrrt/cnf/user/.xtt_start /home/pwrp
chmod a+x /home/pwrp/.xtt_start
# cp /usr/pwrrt/cnf/user/.xsession /home/pwrp
chown -R pwrp /home/pwrp
chgrp -R pwrp /home/pwrp
# Add to group dialout
if grep -q "\bdialout:" /etc/group; then
usermod -a -G dialout pwrp
fi
fi
if ! grep -q "\bskiftel:" /etc/passwd; then
echo "-- Add user skiftel"
new_user=1
useradd -s /bin/bash -p aa6NzxS/aBgP6 -g skiftel -G pwrp -d /home/skiftel skiftel
if [ ! -e /home/skiftel ]; then
mkdir /home/skiftel
cp /usr/pwrrt/cnf/user/.bashrc /home/skiftel
cp /usr/pwrrt/cnf/user/.bash_profile /home/skiftel
# cp /usr/pwrrt/cnf/user/.mwmrc /home/skiftel
cp /usr/pwrrt/cnf/user/.rtt_start /home/skiftel
chmod a+x /home/skiftel/.rtt_start
cp /usr/pwrrt/cnf/user/.xtt_start /home/skiftel
chmod a+x /home/skiftel/.xtt_start
# cp /usr/pwrrt/cnf/user/.xsession /home/skiftel
chown -R pwrp /home/skiftel
chgrp -R pwrp /home/skiftel
fi
fi
if ! grep -q "\bb55:" /etc/passwd; then
echo "-- Add user b55"
new_user=1
# Check if group audio exist
if grep -q "\baudio:" /etc/group; then
groups="pwrp,audio"
else
groups="pwrp"
fi
useradd -s /bin/bash -p aaQPClsglxJP6 -g b55 -G $groups -d /home/b55 b55
if [ ! -e /home/b55 ]; then
mkdir /home/b55
cp /usr/pwrrt/cnf/op/.bashrc /home/b55
cp /usr/pwrrt/cnf/op/.bash_profile /home/b55
# cp /usr/pwrrt/cnf/op/.mwmrc /home/b55
cp /usr/pwrrt/cnf/op/.rtt_start /home/b55
chmod a+x /home/b55/.rtt_start
cp /usr/pwrrt/cnf/op/.xtt_start /home/b55
chmod a+x /home/b55/.xtt_start
# cp /usr/pwrrt/cnf/op/.xsession /home/b55
chown -R b55 /home/b55
chgrp -R pwrp /home/b55
chmod g+rwx /home/b55
fi
fi
if ! grep -q "\bb66:" /etc/passwd; then
echo "-- Add user b66"
new_user=1
# Check if group audio exist
if grep -q "\baudio:" /etc/group; then
groups="pwrp,audio"
else
groups="pwrp"
fi
useradd -s /bin/bash -p aae.nHgHbfUpw -g b66 -G $groups -d /home/b66 b66
if [ ! -e /home/b66 ]; then
mkdir /home/b66
cp /usr/pwrrt/cnf/op/.bashrc /home/b66
cp /usr/pwrrt/cnf/op/.bash_profile /home/b66
# cp /usr/pwrrt/cnf/op/.mwmrc /home/b66
cp /usr/pwrrt/cnf/op/.rtt_start /home/b66
chmod a+x /home/b66/.rtt_start
cp /usr/pwrrt/cnf/op/.xtt_start /home/b66
chmod a+x /home/b66/.xtt_start
# cp /usr/pwrrt/cnf/op/.xsession /home/b66
chown -R b66 /home/b66
chgrp -R pwrp /home/b66
chmod g+rwx /home/b66
fi
fi
chown -R pwrp /usr/pwrrt
chgrp -R pwrp /usr/pwrrt
chmod u+s /usr/pwrrt/exe/rt_ini
chmod u+s /usr/pwrrt/exe/rt_rtt
#chmod u+s /usr/pwrrt/exe/rt_xtt
chmod u+s /usr/pwrrt/exe/rt_bck
chmod u+s /usr/pwrrt/exe/rt_gdhget
chown root /usr/pwrrt/exe/rs_remote_alcm
chmod u+s /usr/pwrrt/exe/rs_remote_alcm
if grep -q "\bdialout:" /etc/group; then
chgrp dialout /usr/pwrrt/exe/rs_remote_serial
chmod ug+s /usr/pwrrt/exe/rs_remote_serial
chgrp dialout /usr/pwrrt/exe/rs_remote_3964r
chmod ug+s /usr/pwrrt/exe/rs_remote_3964r
fi
chown root /usr/pwrrt/exe/rt_prio
chmod u+s /usr/pwrrt/exe/rt_prio
chown root /usr/pwrrt/exe/rt_mozilla
chmod u+s /usr/pwrrt/exe/rt_mozilla
# Copy configuration files
new_cnf=0
if [ ! -e /etc/proview.cnf ]; then
cp /usr/pwrrt/cnf/proview.cnf /etc
new_cnf=1
fi
# Add pwrp_profile to profile
if ! grep -q "/etc/pwrp_profile\b" /etc/profile; then
cat >> /etc/profile <<-EOF
if [ -e /etc/pwrp_profile ]; then
source /etc/pwrp_profile
fi
EOF
fi
# Create startup link
set +e
checklink=`eval ls /etc/rc2.d/S90pwr 2>/dev/null`
set -e
if [ "$checklink" != "" ]; then
rm /etc/rc2.d/S90pwr
fi
ln -s /etc/init.d/pwr /etc/rc2.d/S90pwr
set +e
checklink=`eval ls /etc/rc2.d/S91gdhserver 2>/dev/null`
set -e
if [ "$checklink" != "" ]; then
rm /etc/rc2.d/S91gdhserver
fi
# Obsolete
#ln -s /etc/init.d/gdhserver /etc/rc2.d/S91gdhserver
# Create project
new_project=0
if [ ! -e $proot ]; then
new_project=1
mkdir $proot
mkdir $proot/common
mkdir $proot/common/inc
mkdir $proot/common/load
mkdir $proot/common/log
mkdir $proot/common/loghist
mkdir $proot/common/db
mkdir $proot/common/web
mkdir $proot/x86_linux
mkdir $proot/x86_linux/exe
mkdir $proot/x86_linux/lib
mkdir $proot/x86_linux/obj
mkdir $proot/x86_linux/lis
chown -R pwrp $proot
chgrp -R pwrp $proot
fi
if [ ! -e $aroot/db ]; then
mkdir -p $aroot/db
chown -R pwrp $aroot
fi
# Copy jar-files to web directory
if [ -e /etc/proview.cnf ]; then
set +e
web_dir=`eval cat /etc/proview.cnf | grep "\\bwebDirectory\\b" | awk '{print $2}'`
set -e
if [ -e "$web_dir" ]; then
cp /usr/pwrrt/lib/pwr_rt_client.jar $web_dir
chown pwrp $web_dir/pwr_rt_client.jar
cp /usr/pwrrt/lib/pwr_jop.jar $web_dir
chown pwrp $web_dir/pwr_jop.jar
cp /usr/pwrrt/lib/pwr_jopc.jar $web_dir
chown pwrp $web_dir/pwr_jopc.jar
fi
fi
#
# Add proview web directories to Apache
#
if [ -e /etc/apache2/apache2.conf ]; then
if ! egrep -q "Alias[ ]+/pwrp_web/" /etc/apache2/apache2.conf; then
cat >> /etc/apache2/apache2.conf <<-EOF
#
# Proview alias pwrp_web, added by Proview installation
#
Alias /pwrp_web/ /pwrp/common/web/
<Directory /pwrp/common/web>
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
EOF
fi
if ! egrep -q "Alias[ ]+/pwr_doc/" /etc/apache2/apache2.conf; then
cat >> /etc/apache2/apache2.conf <<-EOF
#
# Proview alias pwr_doc, added by Proview installation
#
Alias /pwr_doc/ /usr/pwrrt/doc/
<Directory /usr/pwrrt/doc>
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
EOF
fi
fi
#
# Set owner on preinstalled I/O systems
#
if [ -e /lib/udev/devices/qbus ]; then
chown pwrp:pwrp /lib/udev/devices/qbus
fi
if [ -e /lib/udev/devices/pbus1 ]; then
chown pwrp:pwrp /lib/udev/devices/pbus1
fi
if [ -e /lib/udev/devices/pbus2 ]; then
chown pwrp:pwrp /lib/udev/devices/pbus2
fi
changes=0
if [ $new_user -eq 1 ]; then
changes=1
elif [ $new_cnf -eq 1 ]; then
changes=1
elif [ $new_project -eq 1 ]; then
changes=1
fi
if [ $changes -ne 0 ]; then
echo ""
echo ""
echo "***********************************************************"
echo " Don't forget to do this :"
echo ""
fi
if [ $new_cnf -eq 1 ]; then
echo "-- Enter QcomBusId in /etc/proview.cnf"
fi
#if [ $new_user -eq 1 ]; then
# echo "-- Enter OpPlace object as argument to rt_xtt in /home/b55/.xtt_start"
#fi
if [ $new_project -eq 1 ]; then
nodename=`eval uname -n`
echo "-- Create file /home/pwrp/.rhosts"
echo "-- Distribute project to $nodename"
fi
if [ $changes -ne 0 ]; then
echo ""
echo "***********************************************************"
echo ""
fi
#!/bin/bash
set -e
# Automatically added by dh_installdocs
if [ \( "$1" = "upgrade" -o "$1" = "remove" \) -a -L /usr/doc/pwrtest ]; then
rm -f /usr/doc/pwrtest
fi
# End automatically added section
proot="/pwrp"
aroot="/usr/pwrp/adm"
echo ""
echo -n "Do you wan't to remove project and users (y/n) [n] "
read remove_all
if [ "$remove_all" = "y" ]; then
# Check that any user that is to be remoted isn't logged in
set +e
user_found=0
currentusers=`eval users`
userstr=""
checkuser=`eval echo $currentusers | grep "\bb55\b"`
if [ "$checkuser" != "" ]; then
user_found=1
userstr=$userstr" b55"
fi
checkuser=`eval echo $currentusers | grep "\bb66\b"`
if [ "$checkuser" != "" ]; then
user_found=1
userstr=$userstr" b66"
fi
checkuser=`eval echo $currentusers | grep "\bpwrp\b"`
if [ "$checkuser" != "" ]; then
user_found=1
userstr=$userstr" pwrp"
fi
checkuser=`eval echo $currentusers | grep "\bskiftel\b"`
if [ "$checkuser" != "" ]; then
user_found=1
userstr=$userstr" skiftel"
fi
if [ $user_found -eq 1 ]; then
echo "-- Current users: $currentusers"
echo "** Remove user will fail. Logout user $userstr first."
exit -1;
fi
set -e
echo "-- Remove user b55"
if grep -q "\bb55:" /etc/passwd; then
userdel b55
fi
if [ -e /home/b55 ]; then
rm -r /home/b55
fi
echo "-- Remove user b66"
if grep -q "\bb66:" /etc/passwd; then
userdel b66
fi
if [ -e /home/b66 ]; then
rm -r /home/b66
fi
echo "-- Remove user pwrp"
if grep -q "\bpwrp:" /etc/passwd; then
userdel pwrp
fi
if [ -e /home/pwrp ]; then
rm -r /home/pwrp
fi
echo "-- Remove user skiftel"
if grep -q "\bskiftel:" /etc/passwd; then
userdel skiftel
fi
if [ -e /home/skiftel ]; then
rm -r /home/skiftel
fi
if grep -q "\bb55:" /etc/group; then
groupdel b55
fi
if grep -q "\bb66:" /etc/group; then
groupdel b66
fi
if grep -q "\bpwrp:" /etc/group; then
groupdel pwrp
fi
if grep -q "\bskiftel:" /etc/group; then
groupdel skiftel
fi
echo "-- Remove project $proot"
if [ -e $proot ]; then
rm -r $proot
fi
if [ -e $aroot ]; then
rm -r $aroot
fi
fi
# Remove startup
checklink=`eval ls /etc/rc2.d/S90pwr 2>/dev/null`
if [ "$checklink" != "" ]; then
rm /etc/rc2.d/S90pwr
fi
# Remove jar-files on web directory
if [ -e /etc/proview.cnf ]; then
web_dir=`eval cat /etc/proview.cnf | grep "\\bwebDirectory\\b" | awk '{print $2}'`
if [ -e $web_dir/pwr_rt_client.jar ]; then
rm $web_dir/pwr_rt_client.jar
fi
if [ -e $web_dir/pwr_jop.jar ]; then
rm $web_dir/pwr_jop.jar
fi
fi
#
# Configuration file for Proview
#
# Default QCOM Bus Id
#
qcomBusId 517
#
# Web directory
#
webDirectory /pwrp/common/web
#!/bin/bash
#
# Startscript fr PWR
#
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
wrapper="/tmp/rt_ini_wrapper"
killer="/tmp/pwr_killer"
. /etc/pwrp_profile
umask 002
create_wrapper()
{
if [ ! -e $wrapper ] ; then
echo "#!/bin/bash" > $wrapper
echo "source /etc/pwrp_profile" >> $wrapper
echo "umask 002" >> $wrapper
echo "\$pwr_exe/rt_ini \$* &" >> $wrapper
chmod a+rx $wrapper
if [ ! -e $wrapper ] ;then
echo "$wrapper not writable, check permissions"
exit
fi
fi
}
create_killer()
{
if [ ! -e $killer ] ; then
echo "#!/bin/bash" > $killer
echo "source /etc/pwrp_profile" >> $killer
echo "umask 002" >> $killer
echo "kill -9 `ps ax | grep "rt_" | awk '{ print $1}'`" >> $killer
echo "kill -9 `ps ax | grep "rs_" | awk '{ print $1}'`" >> $killer
echo "kill -9 `ps ax | grep "ra_" | awk '{ print $1}'`" >> $killer
echo "eval `ipcs -s|grep ^0x|grep "[ \t]pwrp[ \t]"|awk '{printf "ipcrm sem %s;", $2}'`" >> $killer
echo "eval `ipcs -q|grep ^0x|grep "[ \t]pwrp[ \t]"|awk '{printf "ipcrm msg %s;", $2}'`" >> $killer
echo "eval `ipcs -m|grep ^0x|grep "[ \t]pwrp[ \t]"|awk '{printf "ipcrm shm %s;", $2}'`" >> $killer
echo "rm /tmp/pwr*\$PWR_BUS_ID" >> $killer
chmod a+rx $killer
if [ ! -e $killer ] ;then
echo "$killer not writable, check permissions"
exit
fi
fi
}
pwr_start()
{
create_wrapper
if [ `whoami` == "pwrp" ];then
$wrapper
else
sudo -u pwrp $wrapper
fi
}
pwr_stop()
{
create_wrapper
if [ `whoami` == "pwrp" ];then
$wrapper -s
if [ -e $pwrp_exe/pwrp_stop.sh ]; then
source $pwrp_exe/pwrp_stop.sh
fi
else
sudo -u pwrp $wrapper -s
if [ -e $pwrp_exe/pwrp_stop.sh ]; then
sudo -u pwrp source $pwrp_exe/pwrp_stop.sh
fi
fi
while [ "`ps aux | grep -v grep | grep rt_`" != "" ] ; do sleep 1; done
}
pwr_reload()
{
if [ `whoami` == "pwrp" ];then
$pwr_exe/rt_ini_wrapper -r
else
sudo -u pwrp $pwr_exe/rt_ini_wrapper -r
fi
}
pwr_kill()
{
create_killer
if [ `whoami` == "pwrp" ];then
$killer
else
sudo -u pwrp $killer
fi
}
case "$1"
in
start)
echo "Startar PWR."
pwr_start
echo "Klar."
;;
stop)
echo "Stoppar PWR..."
pwr_stop
echo "Klar"
;;
restart)
echo "Startar om PWR."
echo "Stoppar det frst."
pwr_stop
sleep 1
echo "Startar igen."
pwr_start
echo "Klar."
;;
reload)
echo "PWR varmomstart "
pwr_reload
echo "Klar."
;;
kill)
echo "Tar bort delat minne och kvarblivna applikationer frn PWR"
pwr_kill
echo "Klar."
;;
*)
echo "Usage:{start|stop|restart|reload|kill}" >&2
exit 1
;;
esac
exit 0
.TH pwr "1" "April 2005" "Proview" "Proview Manual"
.SH NAME
pwr - start and stop Proview runtime environment
.SH SYNOPSIS
.B pwr
[start][stop][restart]
.SH DESCRIPTION
Start and stop command for Proview runtime environment.
.SH OPTIONS
.HP
\fBstart\fR
.IP
Start Proview runtime environment.
.HP
\fBstop\fR
.IP
Stop Proview runtime environment.
.HP
\fBrestart\fR
.IP
First stop and then start the Proview runtime environment.
.SH FILES
/etc/pwrp_profile
The Proview system wide configuration file.
.SH ENVIRONMENT
.HP
PWR_BUS_ID
.IP
QCOM bus identity.
.SH AUTHOR
Written by UL.
.SH "SEE ALSO"
.BR rt_ini(1)
bus_id=""
if [ -e /etc/proview.cnf ]; then
bus_id=`eval cat /etc/proview.cnf | grep "\\bqcomBusId\\b" | awk '{print $2}'`
fi
if [ -e /etc/proview.cnf ]; then
web_dir=`eval cat /etc/proview.cnf | grep "\\bwebDirectory\\b" | awk '{print $2}'`
fi
export PWR_BUS_ID=$bus_id
export pwrb_root=/usr/pwrrt
export pwrp_root=/pwrp
export pwr_exe=$pwrb_root/exe
export pwr_lib=$pwrb_root/lib
export pwr_obj=$pwrb_root/obj
export pwr_inc=$pwrb_root/inc
export pwr_load=$pwrb_root/load
export pwr_lis=$pwrb_root/lis
export pwr_doc=$pwrb_root/doc
export pwrp_exe=$pwrp_root/x86_linux/exe
export pwrp_lib=$pwrp_root/x86_linux/lib
export pwrp_obj=$pwrp_root/x86_linux/obj
export pwrp_lis=$pwrp_root/x86_linux/lis
export pwrp_inc=$pwrp_root/common/inc
export pwrp_load=$pwrp_root/common/load
export pwrp_log=$pwrp_root/common/log
export pwrp_db=$pwrp_root/common/db
export pwrp_web=$web_dir
export pwra_db=/usr/pwrp/adm/db
jdk=`eval ls /usr/local | grep ^jre`
export jdk_home=/usr/local/$jdk/bin
PATH=$PATH:$pwr_exe:$pwrp_exe:$jdk_home
#Set display to remote computer
export DISPLAY=$REMOTEHOST:0.0
#symbols to define start/stop commands for PWR
alias pwr_stop='/etc/init.d/pwr stop'
alias pwr_stop.sh="/etc/init.d/pwr stop"
alias pwr_start="/etc/init.d/pwr start"
alias pwr="/etc/init.d/pwr"
alias boot="/usr/bin/sudo /sbin/reboot"
if [ -e $pwrp_exe/profile ]; then
source $pwrp_exe/profile
fi
.TH rt_ini "1" "April 2005" "Proview" "Proview Manual"
.SH NAME
rt_ini - start, restart or stop the Proview runtime environment
.SH SYNOPSIS
.B rt_ini
[\fIOPTION\fR]
.SH DESCRIPTION
Startup process for the Proview runtime environment.
.SH OPTIONS
.HP
\fB\-a\fR
.IP
Application file. The application file defines the application processes for
the node. The default name is $pwrp_load/ld_appl_'node'_'busid'.txt, where node is
the nodename and busid is the QCOM bus id, for example
$pwrp_load/ld_appl_vwxn1t_507.txt
.HP
\fB\-b\fR
.IP
Boot file. The default bootfile is $pwrp_load/ld_boot_'node'_'busid'.txt, where node
is the nodename and busid the QCOM bus id, for example
$pwrp_load/ld_appl_vwxn1t_0507.txt
.HP
\fB\-c\fR
.IP
Console file. The output of log messages to the console device can be redirected with
the -c option.
.HP
\fB\-d\fR
.IP
Load file directory. Default is $pwrp_load.
.HP
\fB\-e\fR
.IP
Ignore errors.
.HP
\fB\-f\fR
.IP
Ignore fatal errors.
.HP
\fB\-h\fR
.IP
Print help.
.HP
\fB\-i\fR
.IP
Interactive. Print error messages to terminal.
.HP
\fB\-n\fR
.IP
Node name.
.HP
\fB\-p\fR
.IP
Plc file. Default is $pwrp_exe/plc_'node'_'busid' where node id the node name and busid
the QCOM bus id.
.HP
\fB\-q\fR
.IP
QCOM bus id.
.HP
\fB\-r\fR
.IP
Soft restart.
.HP
\fB\-s\fR
.IP
Stop Proview.
.HP
\fB\-v\fR
.IP
Verbose.
.HP
\fB\-w\fR
.IP
Ignore warnings.
.HP
\fB\-A\fR
.IP
Alias file. Default is $pwrp_load/pwrp_alias.dat
.HP
\fB\-?\fR
.IP
Print help.
.SH FILES
/etc/pwrp_profile
The Proview system wide configuration file.
.SH "SEE ALSO"
.BR pwr(1)
.TH rt_rtt "1" "April 2005" "Proview" "Proview Manual"
.SH NAME
rt_rtt - Proview Runtime Terminal Tool
.SH SYNOPSIS
.B rt_rtt
[user] [script] [configuration]
.SH DESCRIPTION
Examine and navigate in the realtime database from a VT100 terminal.
.SH OPTIONS
.HP
\fBuser\fR
.IP
The user of the session. OP for operator, SYS for system manager.
.HP
\fBscript\fR
.IP
A rtt script file.
.HP
\fBconfiguration\fR
.IP
A RttConfig object that configures the session.
.SH AUTHOR
Written by cs.
.SH "SEE ALSO"
.BR rt_xtt(1)
.TH rt_xtt "1" "April 2005" "Proview" "Proview Manual"
.SH NAME
rt_xtt - Proview Operator Environment
.SH SYNOPSIS
.B rt_xtt
[\fIOPTION\fR] [opplace]
.SH DESCRIPTION
The Proview Operator Environment contains a set of utitlities to display information
about the process and the Proview system:
.RS
\- Operator window.
.RE
.RS
\- Process Graphics drawn in the Ge editor.
.RE
.RS
\- Trends and fastcurves.
.RE
.RS
\- Helptexts.
.RE
.RS
\- Navigator for the realtime database.
.RE
.RS
\- Alarms and events.
.RE
.SH OPTIONS
.HP
\fBopplace\fR
.IP
The name of the OpPlace object for the operator place.
.HP
\fB\-l\fR
.IP
Language.
.RS
en_us English
.RE
.RS
sv_se Swedish.
.RE
.RS
en_us is default.
.RE
.HP
\fB\-u\fR
.IP
Use opplace object with the same name as the current user.
.SH AUTHOR
Written by cs.
.SH "SEE ALSO"
.BR pwr(1),
.BR rt_ini(1)
#!/bin/bash
pf="ubu_x86_64"
# Get version
if [ -e $pwr_inc/pwr_version.h ]; then
ver=`eval cat $pwr_inc/pwr_version.h | grep "\bpwrv_cWbdbVersionShortStr\b" | awk '{print $3}'`
if [ -z $ver ]; then
echo "Unable to get pwr version"
ver="V00"
fi
ver=${ver:2:2}
fi
# Generate version help file
{
if [ ! -e $pwre_sroot/tools/pkg/$pf/pwrsev/control ]; then
echo "Controlfile not found"
exit 1
fi
datfile=$pwre_sroot/tools/pkg/$pf/pwrsev/control
echo "<topic> version"
d=`eval date +\"%F %X\"`
{
let printout=0
while read line; do
if [ "${line:0:9}" = "Package: " ]; then
package=${line#Package: }
fi
if [ "${line:0:9}" = "Version: " ]; then
version=${line#Version: }
fi
if [ "${line:0:14}" = "Architecture: " ]; then
arch=${line#Architecture: }
fi
if [ "${line:0:12}" = "Description:" ]; then
echo ""
echo "<image> pwr_logga.gif"
echo ""
echo ""
echo ""
echo "<b>Proview Storage Environment V${version:0:3}"
echo "Version V$version"
echo ""
echo "Copyright 2004-${d:0:4} SSAB Oxelsund AB"
echo ""
echo "This program is free software; you can redistribute it and/or"
echo "modify it under the terms of the GNU General Public License as"
echo "published by the Free Software Foundation, either version 2 of"
echo "the License, or (at your option) any later version."
echo ""
echo "This program is distributed in the hope that it will be useful"
echo "but WITHOUT ANY WARRANTY; without even the implied warranty of"
echo "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
echo "For more details, see the"
echo "GNU General Public License. <weblink> http://www.proview.se/gpllicense.html"
echo ""
echo "E-mail postmaster@proview.se <weblink> mailto:postmaster@proview.se"
echo "Internet www.proview.se <weblink> http://www.proview.se"
echo ""
echo ""
echo "<b>Package"
echo "Package $package""_""$version""_""$arch"
echo "Build date $d"
echo "Package description:"
echo ""
printout=1
else
if [ $printout -eq 1 ]; then
echo $line
fi
fi
done
} < $datfile
echo "</topic>"
} > $pwr_eexe/sev_xtt_version_help.dat
# Convert to html
co_convert -t -d $pwr_doc $pwr_eexe/sev_xtt_version_help.dat
{
echo "<html><head>"
echo "<meta http-equiv=\"Refresh\" content=\"5;../sev_xtt_version_help_version.html\">"
echo "</head></html>"
} > $pwr_doc/en_us/package_version.html
if [ "$1" == "-v" ]; then
exit
fi
pkgroot=$pwre_broot/$pwre_target/bld/pkg/pwrsev
pkgsrc=$pwre_sroot/tools/pkg/$pf/pwrsev
# Create directories
echo "-- Create package tree"
mkdir -p $pkgroot/DEBIAN
mkdir -p $pkgroot/usr/share/doc/pwrsev
mkdir -p $pkgroot/etc/init.d
find $pkgroot -type d | xargs chmod 755
# control
cp $pkgsrc/control $pkgroot/DEBIAN
cp $pkgsrc/postinst $pkgroot/DEBIAN
cp $pkgsrc/prerm $pkgroot/DEBIAN
# copyright
cp $pkgsrc/copyright $pkgroot/usr/share/doc/pwrsev
# changelog
cp $pkgsrc/changelog $pkgroot/usr/share/doc/pwrsev
gzip -fq --best $pkgroot/usr/share/doc/pwrsev/changelog
# changelog.Debian
cp $pkgsrc/changelog.Debian $pkgroot/usr/share/doc/pwrsev
gzip -fq --best $pkgroot/usr/share/doc/pwrsev/changelog.Debian
# Startup files
cp $pkgsrc/pwrp_profile $pkgroot/etc
chmod a+x $pkgroot/etc/pwrp_profile
cp $pkgsrc/pwrsev $pkgroot/etc/init.d
chmod a+x $pkgroot/etc/init.d/pwrsev
# Man pages
mkdir -p $pkgroot/usr/share/man/man1
cp $pkgsrc/pwrsev.1 $pkgroot/usr/share/man/man1/pwrsev.1
gzip -fq --best $pkgroot/usr/share/man/man1/pwrsev.1
cp $pkgsrc/sev_ini.1 $pkgroot/usr/share/man/man1/sev_ini.1
gzip -fq --best $pkgroot/usr/share/man/man1/sev_ini.1
cp $pkgsrc/sev_xtt.1 $pkgroot/usr/share/man/man1/sev_xtt.1
gzip -fq --best $pkgroot/usr/share/man/man1/sev_xtt.1
# Copy proview
mkdir $pkgroot/usr/pwrsev
currentdir="`eval pwd`"
tarfile=$pwre_broot/$pwre_target/bld/pkg/pwrtmp.tar
cd $pwre_broot/$pwre_target/exp
echo "-- Copy release to package tree"
tar -cf $tarfile exe/rt_qmon exe/rt_prio exe/sev_ini exe/sev_xtt exe/sev_xtt_gtk exe/sev_server exe/*.gif exe/*.png exe/sev_xtt_version_help.dat exe/pwr_pkg.sh exe/en_us/*.txt doc/*
cd $pkgroot/usr/pwrsev
mkdir cnf
tar -xf $tarfile
rm $tarfile
#rm -r $pkgroot/usr/pwrsev/lib/*.a
#rm -r $pkgroot/usr/pwrsev/exe/wb*
cp $pwr_eexe/wb_distr_keepboot.sh $pkgroot/usr/pwrsev/exe
cd $currentdir
# Copy configuration files to cnf
cp $pkgsrc/proview.cnf $pkgroot/usr/pwrsev/cnf
# Copy op to cnf
mkdir $pkgroot/usr/pwrsev/cnf/op
cp $pwre_sroot/tools/pkg/deb/op/.bashrc $pkgroot/usr/pwrsev/cnf/op
cp $pwre_sroot/tools/pkg/deb/op/.bash_profile $pkgroot/usr/pwrsev/cnf/op
#cp $pwre_sroot/tools/pkg/deb/op/.mwmrc $pkgroot/usr/pwrsev/cnf/op
cp $pwre_sroot/tools/pkg/deb/op/.rtt_start $pkgroot/usr/pwrsev/cnf/op
cp $pwre_sroot/tools/pkg/deb/op/.xtt_start $pkgroot/usr/pwrsev/cnf/op
#cp $pwre_sroot/tools/pkg/deb/op/.xsession $pkgroot/usr/pwrsev/cnf/op
# Copy user to cnf
mkdir $pkgroot/usr/pwrsev/cnf/user
cp $pwre_sroot/tools/pkg/deb/user/.bashrc $pkgroot/usr/pwrsev/cnf/user
cp $pwre_sroot/tools/pkg/deb/user/.bash_profile $pkgroot/usr/pwrsev/cnf/user
#cp $pwre_sroot/tools/pkg/deb/user/.mwmrc $pkgroot/usr/pwrsev/cnf/user
cp $pwre_sroot/tools/pkg/deb/user/.rtt_start $pkgroot/usr/pwrsev/cnf/user
cp $pwre_sroot/tools/pkg/deb/user/.xtt_start $pkgroot/usr/pwrsev/cnf/user
#cp $pwre_sroot/tools/pkg/deb/user/.xsession $pkgroot/usr/pwrsev/cnf/user
# Create package
echo "-- Building package"
if which fakeroot > /dev/null; then
fakeroot dpkg -b $pkgroot $pwre_broot/$pwre_target/bld/pkg
else
dpkg -b $pkgroot $pwre_broot/$pwre_target/bld/pkg
fi
rm -r $pkgroot
Proview V3.4b (3.4.1-1)
\ No newline at end of file
Proview. See also normal changelog file.
\ No newline at end of file
Package: pwrsev
Version: 4.7.0-1
Section: base
Priority: optional
Architecture: amd64
Depends: libc6 (>= 2.10.1-0ubuntu16), libgtk2.0-0 (>= 2.18.3-1ubuntu2.2), libasound2 (>= 1.0.20-3ubuntu6.1), libdb4.7 (>=4.7.25-7ubuntu2), libmysqlclient15off (>= 5.1.30really5.0.83-0ubuntu3)
Replaces: pwr34,pwr39,pwr40,pwr41,pwr42,pwr43,pwr44,pwr45,pwr46,pwr47
Maintainer: Proview <postmaster@proview.se>
Description:
Proview storage environment
4.7.0-1 Base release
Proview
Copyright: SSAB Oxelsund AB <ssabox.com>
2003-11-21
The home page of Proview is at:
http://www.proview.se
#!/bin/bash
set -e
if [ "$pwrrt_xtrace" != "" ]; then
set -o xtrace
fi
# Automatically added by dh_installdocs
if [ "$1" = "configure" ]; then
if [ -d /usr/doc -a ! -e /usr/doc/pwrtest -a -d /usr/share/doc/pwrtest ]; then
ln -sf ../share/doc/pwrtest /usr/doc/pwrtest
fi
fi
# End automatically added section
proot="/pwrp"
aroot="/usr/pwrp/adm"
# Create users...
new_user=0
if getent group pwrp > /dev/null; then
echo "-- group pwrp already exist"
else
if groupadd pwrp; then
echo "-- group pwrp added"
fi
fi
if getent group b55 > /dev/null; then
echo "-- group b55 already exist"
else
if groupadd b55; then
echo "-- group b55 added"
fi
fi
if getent group b66 > /dev/null; then
echo "-- group b66 already exist"
else
if groupadd b66; then
echo "-- group b66 added"
fi
fi
if getent group skiftel > /dev/null; then
echo "-- group skiftel already exist"
else
if groupadd skiftel; then
echo "-- group skiftel added"
fi
fi
if getent passwd pwrp > /dev/null; then
echo "-- user pwrp already exist"
else
new_user=1
if useradd -s /bin/bash -p aaupl/kQs1p3U -g pwrp -G b55,b66,skiftel -d /home/pwrp pwrp; then
echo "-- user pwrp added"
fi
if [ ! -e /home/pwrp ]; then
mkdir /home/pwrp
cp /usr/pwrsev/cnf/user/.bashrc /home/pwrp
cp /usr/pwrsev/cnf/user/.bash_profile /home/pwrp
# cp /usr/pwrsev/cnf/user/.mwmrc /home/pwrp
cp /usr/pwrsev/cnf/user/.rtt_start /home/pwrp
chmod a+x /home/pwrp/.rtt_start
cp /usr/pwrsev/cnf/user/.xtt_start /home/pwrp
chmod a+x /home/pwrp/.xtt_start
# cp /usr/pwrsev/cnf/user/.xsession /home/pwrp
chown -R pwrp /home/pwrp
chgrp -R pwrp /home/pwrp
fi
# Add to group dialout
if getent group dialout > /dev/null; then
usermod -a -G dialout pwrp
fi
fi
if getent passwd skiftel > /dev/null; then
echo "-- user skiftel already exist"
else
new_user=1
if useradd -s /bin/bash -p aa6NzxS/aBgP6 -g skiftel -G pwrp -d /home/skiftel skiftel; then
echo "-- user skiftel added"
fi
if [ ! -e /home/skiftel ]; then
mkdir /home/skiftel
cp /usr/pwrsev/cnf/user/.bashrc /home/skiftel
cp /usr/pwrsev/cnf/user/.bash_profile /home/skiftel
# cp /usr/pwrsev/cnf/user/.mwmrc /home/skiftel
cp /usr/pwrsev/cnf/user/.rtt_start /home/skiftel
chmod a+x /home/skiftel/.rtt_start
cp /usr/pwrsev/cnf/user/.xtt_start /home/skiftel
chmod a+x /home/skiftel/.xtt_start
# cp /usr/pwrsev/cnf/user/.xsession /home/skiftel
chown -R pwrp /home/skiftel
chgrp -R pwrp /home/skiftel
fi
fi
if getent passwd b55 > /dev/null; then
new_user=1
# Check if group audio exist
if getent group audio > /dev/null; then
groups="pwrp,audio"
else
groups="pwrp"
fi
if useradd -s /bin/bash -p aaQPClsglxJP6 -g b55 -G $groups -d /home/b55 b55; then
echo "-- user b55 added"
fi
if [ ! -e /home/b55 ]; then
mkdir /home/b55
cp /usr/pwrsev/cnf/op/.bashrc /home/b55
cp /usr/pwrsev/cnf/op/.bash_profile /home/b55
# cp /usr/pwrsev/cnf/op/.mwmrc /home/b55
cp /usr/pwrsev/cnf/op/.rtt_start /home/b55
chmod a+x /home/b55/.rtt_start
cp /usr/pwrsev/cnf/op/.xtt_start /home/b55
chmod a+x /home/b55/.xtt_start
# cp /usr/pwrsev/cnf/op/.xsession /home/b55
chown -R b55 /home/b55
chgrp -R pwrp /home/b55
chmod g+rwx /home/b55
fi
fi
if getent passwd b66 > /dev/null; then
new_user=1
# Check if group audio exist
if getent group audio > /dev/null; then
groups="pwrp,audio"
else
groups="pwrp"
fi
if useradd -s /bin/bash -p aae.nHgHbfUpw -g b66 -G $groups -d /home/b66 b66; then
echo "-- user b66 added"
fi
if [ ! -e /home/b66 ]; then
mkdir /home/b66
cp /usr/pwrsev/cnf/op/.bashrc /home/b66
cp /usr/pwrsev/cnf/op/.bash_profile /home/b66
# cp /usr/pwrsev/cnf/op/.mwmrc /home/b66
cp /usr/pwrsev/cnf/op/.rtt_start /home/b66
chmod a+x /home/b66/.rtt_start
cp /usr/pwrsev/cnf/op/.xtt_start /home/b66
chmod a+x /home/b66/.xtt_start
# cp /usr/pwrsev/cnf/op/.xsession /home/b66
chown -R b66 /home/b66
chgrp -R pwrp /home/b66
chmod g+rwx /home/b66
fi
fi
chown -R pwrp /usr/pwrsev
chgrp -R pwrp /usr/pwrsev
chmod u+s /usr/pwrsev/exe/sev_ini
chown root /usr/pwrsev/exe/rt_prio
chmod u+s /usr/pwrsev/exe/rt_prio
# Copy configuration files
new_cnf=0
if [ ! -e /etc/proview.cnf ]; then
cp /usr/pwrsev/cnf/proview.cnf /etc
new_cnf=1
fi
# Add pwrp_profile to profile
if ! grep -q "/etc/pwrp_profile\b" /etc/profile; then
cat >> /etc/profile <<-EOF
if [ -e /etc/pwrp_profile ]; then
source /etc/pwrp_profile
fi
EOF
fi
# Create startup link
set +e
checklink=`eval ls /etc/rc2.d/S90pwrsev 2>/dev/null`
set -e
if [ "$checklink" != "" ]; then
rm /etc/rc2.d/S90pwrsev
fi
ln -s /etc/init.d/pwrsev /etc/rc2.d/S90pwrsev
# Create project
new_project=0
if [ ! -e $proot ]; then
new_project=1
mkdir $proot
mkdir $proot/common
mkdir $proot/common/inc
mkdir $proot/common/load
mkdir $proot/common/log
mkdir $proot/common/loghist
mkdir $proot/common/db
mkdir $proot/common/web
mkdir $proot/x86_linux
mkdir $proot/x86_linux/exe
mkdir $proot/x86_linux/lib
mkdir $proot/x86_linux/obj
mkdir $proot/x86_linux/lis
chown -R pwrp $proot
chgrp -R pwrp $proot
fi
if [ ! -e $aroot/db ]; then
mkdir -p $aroot/db
chown -R pwrp $aroot
fi
#
changes=0
if [ $new_user -eq 1 ]; then
changes=1
elif [ $new_cnf -eq 1 ]; then
changes=1
elif [ $new_project -eq 1 ]; then
changes=1
fi
if [ $changes -ne 0 ]; then
echo ""
echo ""
echo "***********************************************************"
echo " Don't forget to do this :"
echo ""
fi
if [ $new_cnf -eq 1 ]; then
echo "-- Enter QcomBusId in /etc/proview.cnf"
fi
#if [ $new_user -eq 1 ]; then
# echo "-- Enter OpPlace object as argument to rt_xtt in /home/b55/.xtt_start"
#fi
if [ $new_project -eq 1 ]; then
nodename=`eval uname -n`
echo "-- Create file /home/pwrp/.rhosts"
echo "-- Distribute project to $nodename"
fi
if [ $changes -ne 0 ]; then
echo ""
echo "***********************************************************"
echo ""
fi
#!/bin/sh
set -e
# Automatically added by dh_installdocs
if [ \( "$1" = "upgrade" -o "$1" = "remove" \) -a -L /usr/doc/pwrtest ]; then
rm -f /usr/doc/pwrtest
fi
# End automatically added section
proot="/pwrp"
aroot="/usr/pwrp/adm"
echo ""
echo -n "Do you wan't to remove project and users (y/n) [n] "
read remove_all
if [ "$remove_all" = "y" ]; then
# Check that any user that is to be remoted isn't logged in
set +e
user_found=0
currentusers=`eval users`
userstr=""
checkuser=`eval echo $currentusers | grep "\bb55\b"`
if [ "$checkuser" != "" ]; then
user_found=1
userstr=$userstr" b55"
fi
checkuser=`eval echo $currentusers | grep "\bb66\b"`
if [ "$checkuser" != "" ]; then
user_found=1
userstr=$userstr" b66"
fi
checkuser=`eval echo $currentusers | grep "\bpwrp\b"`
if [ "$checkuser" != "" ]; then
user_found=1
userstr=$userstr" pwrp"
fi
checkuser=`eval echo $currentusers | grep "\bskiftel\b"`
if [ "$checkuser" != "" ]; then
user_found=1
userstr=$userstr" skiftel"
fi
if [ $user_found -eq 1 ]; then
echo "-- Current users: $currentusers"
echo "** Remove user will fail. Logout user $userstr first."
exit -1;
fi
set -e
echo "-- Remove user b55"
if grep -q "\bb55:" /etc/passwd; then
userdel b55
fi
if [ -e /home/b55 ]; then
rm -r /home/b55
fi
echo "-- Remove user b66"
if grep -q "\bb66:" /etc/passwd; then
userdel b66
fi
if [ -e /home/b66 ]; then
rm -r /home/b66
fi
echo "-- Remove user pwrp"
if grep -q "\bpwrp:" /etc/passwd; then
userdel pwrp
fi
if [ -e /home/pwrp ]; then
rm -r /home/pwrp
fi
echo "-- Remove user skiftel"
if grep -q "\bskiftel:" /etc/passwd; then
userdel skiftel
fi
if [ -e /home/skiftel ]; then
rm -r /home/skiftel
fi
if grep -q "\bb55:" /etc/group; then
groupdel b55
fi
if grep -q "\bb66:" /etc/group; then
groupdel b66
fi
if grep -q "\bpwrp:" /etc/group; then
groupdel pwrp
fi
if grep -q "\bskiftel:" /etc/group; then
groupdel skiftel
fi
echo "-- Remove project $proot"
if [ -e $proot ]; then
rm -r $proot
fi
if [ -e $aroot ]; then
rm -r $aroot
fi
fi
# Remove startup
checklink=`eval ls /etc/rc2.d/S90pwrsev 2>/dev/null`
if [ "$checklink" != "" ]; then
rm /etc/rc2.d/S90pwrsev
fi
# Remove jar-files on web directory
if [ -e /etc/proview.cnf ]; then
web_dir=`eval cat /etc/proview.cnf | grep "\\bwebDirectory\\b" | awk '{print $2}'`
if [ -e $web_dir/pwr_rt_client.jar ]; then
rm $web_dir/pwr_rt_client.jar
fi
if [ -e $web_dir/pwr_jop.jar ]; then
rm $web_dir/pwr_jop.jar
fi
fi
#
# Configuration file for Proview
#
# Default QCOM Bus Id
#
qcomBusId 517
#
# Web directory
#
webDirectory /pwrp/common/web
#
# Default privileges for SevXtt: Read, Admin or None
#
sevXttDefaultPriv Read
bus_id=""
if [ -e /etc/proview.cnf ]; then
bus_id=`eval cat /etc/proview.cnf | grep "\\bqcomBusId\\b" | awk '{print $2}'`
fi
if [ -e /etc/proview.cnf ]; then
web_dir=`eval cat /etc/proview.cnf | grep "\\bwebDirectory\\b" | awk '{print $2}'`
fi
export PWR_BUS_ID=$bus_id
export pwrb_root=/usr/pwrsev
export pwrp_root=/pwrp
export pwr_exe=$pwrb_root/exe
export pwr_lib=$pwrb_root/lib
export pwr_obj=$pwrb_root/obj
export pwr_inc=$pwrb_root/inc
export pwr_load=$pwrb_root/load
export pwr_lis=$pwrb_root/lis
export pwr_doc=$pwrb_root/doc
export pwrp_exe=$pwrp_root/x86_linux/exe
export pwrp_lib=$pwrp_root/x86_linux/lib
export pwrp_obj=$pwrp_root/x86_linux/obj
export pwrp_lis=$pwrp_root/x86_linux/lis
export pwrp_inc=$pwrp_root/common/inc
export pwrp_load=$pwrp_root/common/load
export pwrp_log=$pwrp_root/common/log
export pwrp_db=$pwrp_root/common/db
export pwrp_web=$web_dir
export pwra_db=/usr/pwrp/adm/db
jdk=`eval ls /usr/local | grep ^jre`
export jdk_home=/usr/local/$jdk/bin
PATH=$PATH:$pwr_exe:$pwrp_exe:$jdk_home
#Set display to remote computer
export DISPLAY=$REMOTEHOST:0.0
#symbols to define start/stop commands for PWR
alias pwr_stop='/etc/init.d/pwrsvestop'
alias pwr_stop.sh="/etc/init.d/pwrsev stop"
alias pwr_start="/etc/init.d/pwrsev start"
alias pwrsev="/etc/init.d/pwrsev"
alias pwr="/etc/init.d/pwrsev"
alias boot="/usr/bin/sudo /sbin/reboot"
if [ -e $pwrp_exe/profile ]; then
source $pwrp_exe/profile
fi
#!/bin/bash
#
# Startscript fr PWR
#
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
wrapper="/tmp/sev_ini_wrapper"
killer="/tmp/pwr_killer"
. /etc/pwrp_profile
umask 002
create_wrapper()
{
if [ ! -e $wrapper ] ; then
echo "#!/bin/bash" > $wrapper
echo "source /etc/pwrp_profile" >> $wrapper
echo "umask 002" >> $wrapper
echo "\$pwr_exe/sev_ini \$* &" >> $wrapper
chmod a+rx $wrapper
if [ ! -e $wrapper ] ;then
echo "$wrapper not writable, check permissions"
exit
fi
fi
}
create_killer()
{
echo "#!/bin/bash" > $killer
echo "source /etc/pwrp_profile" >> $killer
echo "umask 002" >> $killer
echo "`ps ax | grep "rt_" | awk '{ print "kill -9 "$1}'`" >> $killer
echo "`ps ax | grep "sev_" | awk '{ print "kill -9 "$1}'`" >> $killer
echo "eval `ipcs -s|grep ^0x|grep "[ \t]pwrp[ \t]"|awk '{printf "ipcrm sem %s;", $2}'`" >> $killer
echo "eval `ipcs -q|grep ^0x|grep "[ \t]pwrp[ \t]"|awk '{printf "ipcrm msg %s;", $2}'`" >> $killer
echo "eval `ipcs -m|grep ^0x|grep "[ \t]pwrp[ \t]"|awk '{printf "ipcrm shm %s;", $2}'`" >> $killer
echo "rm /tmp/pwr*\$PWR_BUS_ID" >> $killer
chmod a+rx $killer
if [ ! -e $killer ] ;then
echo "$killer not writable, check permissions"
exit
fi
}
pwr_start()
{
create_wrapper
if [ `whoami` == "pwrp" ];then
$wrapper
else
sudo -u pwrp $wrapper
fi
}
pwr_stop()
{
create_wrapper
if [ `whoami` == "pwrp" ];then
$wrapper -s
if [ -e $pwrp_exe/pwrp_stop.sh ]; then
source $pwrp_exe/pwrp_stop.sh
fi
else
sudo -u pwrp $wrapper -s
if [ -e $pwrp_exe/pwrp_stop.sh ]; then
sudo -u pwrp source $pwrp_exe/pwrp_stop.sh
fi
fi
while [ "`ps aux | grep -v grep | grep rt_`" != "" ] ; do sleep 1; done
}
pwr_reload()
{
if [ `whoami` == "pwrp" ];then
$pwr_exe/sev_ini_wrapper -r
else
sudo -u pwrp $pwr_exe/sev_ini_wrapper -r
fi
}
pwr_kill()
{
create_killer
if [ `whoami` == "pwrp" ];then
$killer
else
sudo -u pwrp $killer
fi
}
case "$1"
in
start)
echo "Start Proview Storage Environment."
pwr_start
echo "Done."
;;
stop)
echo "Stop Proveiw Storage Environment."
pwr_stop
echo "Done."
;;
restart)
echo "Restart Proview Storage Environment."
echo "Closing down..."
pwr_stop
sleep 1
echo "Starting..."
pwr_start
echo "Done."
;;
reload)
echo "Restart Proview Storage Environment."
echo "Closing down..."
pwr_stop
sleep 1
echo "Starting..."
pwr_start
echo "Done."
;;
kill)
echo "Remove all processes and resources for Proview Storage Environment"
pwr_kill
echo "Done."
;;
reset)
echo "Remove all processes and resources for Proview Storage Environment"
pwr_kill
echo "Done."
;;
*)
echo " pwrsev Start and stop Proview Storage Environment" >&2
echo "" >&2
echo " Usage:" >&2
echo " pwrsev start|stop|restart|reset" >&2
echo "" >&2
echo " start Start Storage environment" >&2
echo " stop Stop Storage environment" >&2
echo " restart First stop and then start Storage environment" >&2
echo " reset Remove all processes and resources" >&2
echo "" >&2
exit 1
;;
esac
exit 0
.TH pwr "1" "April 2005" "Proview" "Proview Manual"
.SH NAME
pwrsev - start and stop Proview Storage Environment
.SH SYNOPSIS
.B pwrsev
[start][stop][restart][reset]
.SH DESCRIPTION
Start and stop command for Proview Storage Environment.
.SH OPTIONS
.HP
\fBstart\fR
.IP
Start Proview storage environment.
.HP
\fBstop\fR
.IP
Stop Proview storage environment.
.HP
\fBrestart\fR
.IP
Stop and start the Proview storage environment.
.HP
\fBreset\fR
.IP
Remove all processes and resources.
.SH FILES
/etc/pwrp_profile
The Proview system wide configuration file.
.SH ENVIRONMENT
.HP
PWR_BUS_ID
.IP
QCOM bus identity.
.SH AUTHOR
Written by cs.
.SH "SEE ALSO"
.BR sev_ini(1)
.TH sev_ini "1" "April 2005" "Proview" "Proview Manual"
.SH NAME
sev_ini - start or stop the Proview storage environment
.SH SYNOPSIS
.B sev_ini
[\fIOPTION\fR]
.SH DESCRIPTION
Startup process for the Proview storage environment.
.SH OPTIONS
.HP
\fB\-a\fR
.IP
Application file. The application file defines the application processes for
the node. The default name is $pwrp_load/ld_appl_'node'_'busid'.txt, where node is
the nodename and busid is the QCOM bus id, for example
$pwrp_load/ld_appl_vwxn1t_507.txt
.HP
\fB\-c\fR
.IP
Console file. The output of log messages to the console device can be redirected with
the -c option.
.HP
\fB\-d\fR
.IP
Load file directory. Default is $pwrp_load.
.HP
\fB\-e\fR
.IP
Ignore errors.
.HP
\fB\-f\fR
.IP
Ignore fatal errors.
.HP
\fB\-h\fR
.IP
Print help.
.HP
\fB\-i\fR
.IP
Interactive. Print error messages to terminal.
.HP
\fB\-n\fR
.IP
Node name.
.HP
\fB\-q\fR
.IP
QCOM bus id.
.HP
\fB\-s\fR
.IP
Stop Proview.
.HP
\fB\-v\fR
.IP
Verbose.
.HP
\fB\-w\fR
.IP
Ignore warnings.
.HP
\fB\-?\fR
.IP
Print help.
.SH FILES
/etc/pwrp_profile
The Proview system wide configuration file.
.SH "SEE ALSO"
.BR pwrsev(1)
.TH sev_xtt "1" "April 2005" "Proview" "Proview Manual"
.SH NAME
sev_xtt - Proview Storage Operator
.SH SYNOPSIS
.B sev_xtt
[\fIOPTION\fR] [opplace]
.SH DESCRIPTION
The Proview Storage Operator Environment contains a set of utitlities to handle the
the stored data.
.SH OPTIONS
.HP
\fBopplace\fR
.IP
The name of the OpPlace object for the operator place.
.HP
\fB\-l\fR
.IP
Language.
.RS
en_us English
.RE
.RS
sv_se Swedish.
.RE
.RS
de_de German.
.RE
.RS
en_us is default.
.RE
.HP
\fB\-q\fR
.IP
Quiet. Hide license information.
.SH AUTHOR
Written by cs.
.SH "SEE ALSO"
.BR sevpwr(1),
.BR sev_ini(1)
include $(pwre_dir_symbols)
ifndef variables_mk
-include $(pwre_sroot)/tools/bld/src/$(os_name)/$(hw_name)/variables.mk
endif
ifndef variables_mk
include $(pwre_sroot)/tools/bld/src/$(os_name)/variables.mk
endif
ifndef rules_mk
-include $(pwre_sroot)/tools/bld/src/$(os_name)/$(hw_name)/rules.mk
endif
ifndef rules_mk
include $(pwre_sroot)/tools/bld/src/$(os_name)/rules.mk
endif
.SUFFIXES:
.PHONY : all init copy lib exe clean realclean \
$(clean_ge)
all : init copy lib exe
init : dirs
copy :
lib :
exe : $(bld_dir)/control_pwrrt $(bld_dir)/control_pwr $(bld_dir)/control_pwrsev $(bld_dir)/control_pwrdemo
clean :
realclean :
dirs : $(bld_dir)$(dir_ext)
$(bld_dir)$(dir_ext) :
@ $(mkdir) -p $(mkdirflags) $(basename $@)
$(bld_dir)/control_pwrrt : ../../../pwrrt/control
@ echo "build $(target)"
@ ../../../pwrrt/build.sh
@ cp $(source) $(target)
$(bld_dir)/control_pwr : ../../../pwr/control
@ echo "build $(target)"
@ ../../../pwr/build.sh
@ cp $(source) $(target)
$(bld_dir)/control_pwrsev : ../../../pwrsev/control
@ echo "build $(target)"
@ ../../../pwrsev/build.sh
@ cp $(source) $(target)
$(bld_dir)/control_pwrdemo : ../../../pwrdemo/control
@ echo "build $(target)"
@ ../../../pwrdemo/build.sh
@ cp $(source) $(target)
include $(pwre_dir_symbols)
ifndef variables_mk
-include $(pwre_sroot)/tools/bld/src/$(os_name)/$(hw_name)/variables.mk
endif
ifndef variables_mk
include $(pwre_sroot)/tools/bld/src/$(os_name)/variables.mk
endif
ifndef rules_mk
-include $(pwre_sroot)/tools/bld/src/$(os_name)/$(hw_name)/rules.mk
endif
ifndef rules_mk
include $(pwre_sroot)/tools/bld/src/$(os_name)/rules.mk
endif
.SUFFIXES:
.PHONY : all init copy lib exe clean realclean \
$(clean_ge)
all : init copy lib exe
init : dirs
copy :
lib :
exe : $(bld_dir)/control_pwrrt $(bld_dir)/control_pwr $(bld_dir)/control_pwrsev $(bld_dir)/control_pwrdemo
clean :
realclean :
dirs : $(bld_dir)$(dir_ext)
$(bld_dir)$(dir_ext) :
@ $(mkdir) -p $(mkdirflags) $(basename $@)
$(bld_dir)/control_pwrrt : ../../../pwrrt/control
@ echo "build $(target)"
@ ../../../pwrrt/build.sh
@ cp $(source) $(target)
$(bld_dir)/control_pwr : ../../../pwr/control
@ echo "build $(target)"
@ ../../../pwr/build.sh
@ cp $(source) $(target)
$(bld_dir)/control_pwrsev : ../../../pwrsev/control
@ echo "build $(target)"
@ ../../../pwrsev/build.sh
@ cp $(source) $(target)
$(bld_dir)/control_pwrdemo : ../../../pwrdemo/control
@ echo "build $(target)"
@ ../../../pwrdemo/build.sh
@ cp $(source) $(target)
#!/bin/bash
#
# Startscript fr PWR av Ulf Ljungdahl
#
#test -x /sbin/ipchains || exit 0
#test -x /sbin/ipchains-restore || exit 0
#test -x /sbin/ipchains-save || exit 0
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
. /etc/pwrp_profile
save ()
{
echo -n "Saving IP chains: "
TEMPFILE="`tempfile`"
echo "${SAVEFILEHEADER}" >"${TEMPFILE}" && /sbin/ipchains-save >>"${TEMPFILE}" 2>/dev/null
cat "${TEMPFILE}" >/etc/ipchains.save
rm "${TEMPFILE}"
}
pwr_start()
{
$pwr_exe/rt_ini &
sleep 5
/usr/sbin/setrtprio `ps ax | grep "plc" | grep -v "grep" | awk '{ print $1}'`
}
pwr_stop()
{
kill -9 `ps ax | grep "rt_neth_acp" | awk '{ print $1}'`
kill -9 `ps ax | grep "rt_neth" | awk '{ print $1}'`
kill -9 `ps ax | grep "rt_qmon" | awk '{ print $1}'`
kill -9 `ps ax | grep "rt_emon" | awk '{ print $1}'`
kill -9 `ps ax | grep "rt_tmon" | awk '{ print $1}'`
kill -9 `ps ax | grep "rt_\|/pwr/exe/rs" | awk '{ print $1}'`
kill -9 `ps ax | grep "\[rt_" | awk '{ print $1}'`
kill -9 `ps ax | grep "plc_" | awk '{ print $1}'`
kill -9 `ps ax | grep "jpwr.rt" | awk '{ print $1}'`
kill -9 `ps ax | grep "rs_nmps" | awk '{ print $1}'`
kill -9 `ps ax | grep "rs_remote" | awk '{ print $1}'`
if [ -u $pwr_exe/rt_ini ]; then
user=`ls -al $pwr_exe/rt_ini | awk '{ print $3}'`
else
user=$USER
fi
echo "User $user"
eval `ipcs -s|grep ^0x|grep "[ \t]$user[ \t]"|awk '{printf "ipcrm sem %s;", $2
}'`
# remove message queues
eval `ipcs -q|grep ^0x|grep "[ \t]$user[ \t]"|awk '{printf "ipcrm msg %s;", $2
}'`
# remove shared memory
eval `ipcs -m|grep ^0x|grep "[ \t]$user[ \t]"|awk '{printf "ipcrm shm %s;", $2
}'`
if [ -e $pwrp_exe/pwrp_stop.sh ]; then
source $pwrp_exe/pwrp_stop.sh
fi
rm /tmp/pwr*$PWR_BUS_ID
#rm -f /tmp/pwr*
#id=`ipcs -s | grep $user | awk '{print $2}'`
#id1=`echo $id | awk '{print $1}'`
#id2=`echo $id | awk '{print $2}'`
#id3=`echo $id | awk '{print $3}'`
#ipcrm sem $id1
#ipcrm sem $id2
#ipcrm sem $id3
#id=`ipcs -q | grep $user | awk '{print $2}'`
#id1=`echo $id | awk '{print $1}'`
#id2=`echo $id | awk '{print $2}'`
#id3=`echo $id | awk '{print $3}'`
#ipcrm msg $id1
#ipcrm msg $id2
#ipcrm msg $id3
}
case "$1"
in
start)
echo "Startar PWR..."
#if [ 'test -x ps aux | grep plc | grep -v grep' ]
# then
# echo "PWR kr, stoppar det frst.."
# pwr_stop
# fi
pwr_start
echo "Klar."
;;
stop)
echo "Stoppar PWR..."
pwr_stop
# if [ "${SAVEONCE}" != "yes" ]
# then
# save
# echo -n "ipchains-save"
# else
# echo -n "Clearing IP chains:"
# fi
echo "Klar"
;;
restart)
echo "Startar om PWR."
echo "Stoppar det frst."
pwr_stop
sleep 1
echo "Startar igen."
pwr_start
echo "Klar."
;;
*)
echo "Usage:{start|stop|restart}" >&2
#echo "Ingen parameter angiven, startar PWR"
#$0 start
exit 1
;;
esac
exit 0
# ~/.bash_profile: executed by bash(1) for login shells.
# see /usr/share/doc/bash/examples/startup-files for examples.
# the files are located in the bash-doc package.
umask 022
# the rest of this file is commented out.
# include .bashrc if it exists
if [ -f ~/.bashrc ]; then
source ~/.bashrc
fi
# set PATH so it includes user's private bin if it exists
#if [ -d ~/bin ] ; then
# PATH=~/bin:"${PATH}"
#fi
# ~/.bashrc: executed by bash(1) for non-login shells.
# see /usr/share/doc/bash/examples/startup-files for examples
source /etc/pwrp_profile
# If running interactively, then:
if [ "$PS1" ]; then
# enable color support of ls and also add handy aliases
eval `dircolors -b`
alias ls='ls --color=auto'
#alias ll='ls -l'
#alias la='ls -A'
#alias l='ls -CF'
#alias dir='ls --color=auto --format=vertical'
#alias vdir='ls --color=auto --format=long'
# set a fancy prompt
PS1='\u@\h:\w\$ '
# If this is an xterm set the title to user@host:dir
#case $TERM in
#xterm*)
# PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME}: ${PWD}\007"'
# ;;
#*)
# ;;
#esac
fi
!!
!! Root Menu Description for users
!!
Menu DefaultRootMenu
{
"User Menu" f.title
! "XTT OP-bilder" f.exec "~/.xtt_start &"
"XTT" f.exec "~/.xtt_start &"
"RTT" f.exec "/usr/bin/X11/xterm -T RTT -e ~/.rtt_start &"
"PSS-kort" f.exec "/usr/bin/X11/xterm -T PSS_Kort -e /usr/bin/minicom &"
"Xterm" f.exec "/usr/bin/X11/xterm -T XTerm -sb -right &"
"Klocka" f.exec "/usr/bin/X11/xclock &"
"Miniraknare" f.exec "/usr/bin/X11/xcalc &"
! "Shuffle Up" f.circle_up
! "Shuffle Down" f.circle_down
"Refresh" f.refresh
! "Pack Icons" f.pack_icons
! "Toggle Behavior..." f.set_behavior
no-label f.separator
! "Starta om X" f.restart
"Logga ut" f.quit_mwm
"Starta om dator" f.exec "/usr/bin/rebootreq &"
"Stang av dator" f.exec "/usr/bin/haltreq &"
}
!!
!! Default Window Menu
!!
Menu DefaultWindowMenu
{
"Make Pinned" f.toggle_pin_state
no-label f.separator
Restore _R Alt<Key>F5 f.restore
Move _M Alt<Key>F7 f.move
Size _S Alt<Key>F8 f.resize
Minimize _n Alt<Key>F9 f.minimize
Maximize _x Alt<Key>F10 f.maximize
Raise _a Alt<Key>F2 f.raise
Lower _L Alt<Key>F3 f.lower
no-label f.separator
Close _C Alt<Key>F4 f.kill
}
!!
!! Default Key Bindings
!!
Keys DefaultKeyBindings
{
Shift<Key>Escape window|icon f.post_wmenu
Alt<Key>space window|icon f.post_wmenu
Alt<Key>Tab root|icon|window f.next_key
Alt Shift<Key>Tab root|icon|window f.prev_key
Alt<Key>Escape root|icon|window f.circle_down
Alt Shift<Key>Escape root|icon|window f.circle_up
Alt Shift Ctrl<Key>exclam root|icon|window f.set_behavior
Alt<Key>F6 window f.next_key transient
Alt Shift<Key>F6 window f.prev_key transient
Shift<Key>F10 icon f.post_wmenu
Alt Shift<Key>Delete root|icon|window f.restart
}
!!
!! Button Binding Description(s)
!!
!! These can be used anywhere
!!
Buttons DefaultButtonBindings
{
<Btn1Down> icon|frame f.raise
<Btn3Down> icon|frame f.post_wmenu
<Btn3Down> root f.menu DefaultRootMenu
}
!!
!! These are some example bindings that you might use if your
!! keyboardFocusPolicy is "explicit". Note that to use these, you'll
!! have to change the Mwm*buttonBindings resource in Mwm to
!! ExplicitButtonBindings instead of DefaultButtonBindings.
!!
Buttons ExplicitButtonBindings
{
<Btn1Down> frame|icon f.raise
<Btn3Down> frame|icon f.post_wmenu
<Btn3Down> root f.menu DefaultRootMenu
! <Btn1Up> icon f.restore
Alt<Btn1Down> window|icon f.lower
! Alt<Btn2Down> window|icon f.resize
! Alt<Btn3Down> window|icon f.move
}
!! These are some example bindings that you might use if your
!! keyboardFocusPolicy is "pointer". Note that to use these, you'll
!! have to change the Mwm*buttonBindings resource in Mwm to
!! PointerButtonBindings instead of DefaultButtonBindings.
!!
Buttons PointerButtonBindings
{
<Btn1Down> frame|icon f.raise
<Btn3Down> frame|icon f.post_wmenu
<Btn3Down> root f.menu DefaultRootMenu
<Btn1Down> window f.raise
! <Btn1Up> icon f.restore
Alt<Btn1Down> window|icon f.lower
! Alt<Btn2Down> window|icon f.resize
! Alt<Btn3Down> window|icon f.move
}
!include-menu-defs
#Automatically generated file. Do not edit (see /usr/doc/menu/html/index.html)
Menu "/Debian/Apps/Editors"
{
"Editors" f.title
"Emacs 20" f.exec "/usr/bin/emacs20 &"
"NEdit" f.exec "/usr/bin/X11/nedit &"
"Xedit" f.exec "xedit &"
}
Menu "/Debian/Apps/Graphics"
{
"Graphics" f.title
"Bitmap" f.exec "bitmap &"
}
Menu "/Debian/Apps/Math"
{
"Math" f.title
"Xcalc" f.exec "xcalc &"
"bc" f.exec "x-terminal-emulator -T 'bc' -e /usr/bin/bc &"
"dc" f.exec "x-terminal-emulator -T 'dc' -e /usr/bin/dc &"
}
Menu "/Debian/Apps/Net"
{
"Net" f.title
"Lynx" f.exec "x-terminal-emulator -T 'Lynx' -e /usr/bin/lynx &"
"Telnet" f.exec "x-terminal-emulator -T 'Telnet' -e telnet &"
"Xbiff" f.exec "xbiff &"
}
Menu "/Debian/Apps/Programming"
{
"Programming" f.title
"Gdb" f.exec "x-terminal-emulator -T 'Gdb' -e /usr/bin/gdb &"
"Python (v2.1)" f.exec "x-terminal-emulator -T 'Python (v2.1)' -e /usr/bin/python2.1 &"
"Tclsh8.0" f.exec "x-terminal-emulator -T 'Tclsh8.0' -e /usr/bin/tclsh8.0 &"
"Tclsh8.2" f.exec "x-terminal-emulator -T 'Tclsh8.2' -e /usr/bin/tclsh8.2 &"
"Tclsh8.3" f.exec "x-terminal-emulator -T 'Tclsh8.3' -e /usr/bin/tclsh8.3 &"
"TkWish8.0" f.exec "x-terminal-emulator -T 'TkWish8.0' -e /usr/bin/wish8.0 &"
"TkWish8.3" f.exec "/usr/bin/wish8.3 &"
}
Menu "/Debian/Apps/Shells"
{
"Shells" f.title
"Bash" f.exec "x-terminal-emulator -T 'Bash' -e /bin/bash -login &"
"Sh" f.exec "x-terminal-emulator -T 'Sh' -e /bin/sh -login &"
"Tcsh" f.exec "x-terminal-emulator -T 'Tcsh' -e /usr/bin/tcsh &"
}
Menu "/Debian/Apps/System/Admin"
{
"Admin" f.title
"Lilo-config" f.exec "x-terminal-emulator -T 'Lilo-config' -e /usr/sbin/su-to-root -p root -c /usr/sbin/liloconfig &"
"gpm-config" f.exec "x-terminal-emulator -T 'gpm-config' -e /usr/sbin/su-to-root -p root -c /usr/sbin/gpmconfig &"
}
Menu "/Debian/Apps/System"
{
"System" f.title
"Admin" f.menu "/Debian/Apps/System/Admin"
"Task selector" f.exec "x-terminal-emulator -T 'Task selector' -e su-to-root /usr/bin/tasksel &"
"Top" f.exec "x-terminal-emulator -T 'Top' -e /usr/bin/top &"
"Xconsole" f.exec "xconsole &"
"Xload" f.exec "xload &"
"Xvidtune" f.exec "xvidtune &"
"pstree" f.exec "/etc/alternatives/x-terminal-emulator -e /usr/bin/pstree.x11 &"
}
Menu "/Debian/Apps/Tools"
{
"Tools" f.title
"Editres" f.exec "editres &"
"Oclock" f.exec "oclock &"
"X Window Snapshot" f.exec "xwd | xwud &"
"Xclipboard" f.exec "xclipboard &"
"Xclock (analog)" f.exec "xclock -analog &"
"Xclock (digital)" f.exec "xclock -digital -update 1 &"
"Xcutsel" f.exec "xcutsel &"
"Xev" f.exec "x-terminal-emulator -e xev &"
"Xfontsel" f.exec "xfontsel &"
"Xkill" f.exec "xkill &"
"Xmag" f.exec "xmag &"
"Xrefresh" f.exec "xrefresh &"
}
Menu "/Debian/Apps/Viewers"
{
"Viewers" f.title
"GV" f.exec "/usr/bin/X11/gv &"
"XDvi" f.exec "/usr/bin/xdvi &"
"Xditview" f.exec "xditview &"
}
Menu "/Debian/Apps"
{
"Apps" f.title
"Editors" f.menu "/Debian/Apps/Editors"
"Graphics" f.menu "/Debian/Apps/Graphics"
"Math" f.menu "/Debian/Apps/Math"
"Net" f.menu "/Debian/Apps/Net"
"Programming" f.menu "/Debian/Apps/Programming"
"Shells" f.menu "/Debian/Apps/Shells"
"System" f.menu "/Debian/Apps/System"
"Tools" f.menu "/Debian/Apps/Tools"
"Viewers" f.menu "/Debian/Apps/Viewers"
}
Menu "/Debian/Games/Toys"
{
"Toys" f.title
"Xeyes" f.exec "xeyes &"
"Xlogo" f.exec "xlogo &"
}
Menu "/Debian/Games"
{
"Games" f.title
"Toys" f.menu "/Debian/Games/Toys"
}
Menu "/Debian/Help"
{
"Help" f.title
"Info" f.exec "x-terminal-emulator -T 'Info' -e info &"
"Xman" f.exec "xman &"
}
Menu "/Debian/Screen/Root-window"
{
"Root-window" f.title
"Xsetroot" f.exec "xsetroot &"
}
Menu "/Debian/Screen/Save"
{
"Save" f.title
"Beforelight" f.exec "beforelight &"
}
Menu "/Debian/Screen"
{
"Screen" f.title
"Root-window" f.menu "/Debian/Screen/Root-window"
"Save" f.menu "/Debian/Screen/Save"
}
Menu "/Debian/XShells"
{
"XShells" f.title
"XTerm" f.exec "xterm &"
"XTerm (Unicode)" f.exec "uxterm &"
}
Menu "/Debian"
{
"Debian" f.title
"Apps" f.menu "/Debian/Apps"
"Games" f.menu "/Debian/Games"
"Help" f.menu "/Debian/Help"
"Screen" f.menu "/Debian/Screen"
"XShells" f.menu "/Debian/XShells"
}
#!/bin/bash
ource /etc/pwrp_profile
$pwr_exe/rt_rtt
xsetroot -solid darkcyan
xhost +localhost
~/.xtt_start
xset s off s noblank s noexpose -dpms
exec mwm
#!/bin/bash
source /etc/pwrp_profile
$pwr_exe/rt_xtt &
!** Description: Wtt initialization file
! This file is generated at 'Set settings'
! Dont make any changes, use the symbolfile for application setup
if ( IsW1())
set window /width=600 /height=600
two
set inputfocus w1
endif
if ( IsW1())
set noadvanceduser /local
set noalltoplevel /local
set showclass /local
set noshowalias /local
set show description/local
set noshowobjref /local
set noshowobjxref /local
set noshowattrref /local
set noshowattrxref /local
endif
if ( IsW2())
set noadvanceduser /local
set noalltoplevel /local
set showclass /local
set noshowalias /local
set show description/local
set noshowobjref /local
set noshowobjxref /local
set noshowattrref /local
set noshowattrxref /local
endif
!** Description: Wtt initialization file
! This file is generated at 'Set settings'
! Dont make any changes, use the symbolfile for application setup
if ( IsW1())
set window /width=600 /height=600
two
set inputfocus w1
endif
if ( IsW1())
set noadvanceduser /local
set noalltoplevel /local
set showclass /local
set noshowalias /local
set show description/local
set noshowobjref /local
set noshowobjxref /local
set noshowattrref /local
set noshowattrxref /local
endif
if ( IsW2())
set noadvanceduser /local
set noalltoplevel /local
set showclass /local
set noshowalias /local
set show description/local
set noshowobjref /local
set noshowobjxref /local
set noshowattrref /local
set noshowattrxref /local
endif
...@@ -556,6 +556,31 @@ Xtt::Xtt( int *argc, char **argv[], int *return_sts) : ...@@ -556,6 +556,31 @@ Xtt::Xtt( int *argc, char **argv[], int *return_sts) :
opplace_found = 1; opplace_found = 1;
} }
else if ( select_opplace) {
// Check if there is only one single opplace
pwr_tOName fullname;
pwr_tObjName name;
pwr_tStatus sts;
pwr_tOid oid;
int i = 0;
for ( sts = gdh_GetClassList( pwr_cClass_OpPlace, &oid);
ODD(sts);
sts = gdh_GetNextObject( oid, &oid)) {
sts = gdh_ObjidToName( oid, name, sizeof(name), cdh_mName_object);
if ( EVEN(sts) || cdh_NoCaseStrcmp( name, "opdefault") == 0)
continue;
sts = gdh_ObjidToName( oid, fullname, sizeof(fullname), cdh_mNName);
if ( EVEN(sts)) continue;
i++;
}
if ( i == 1) {
strcpy( opplace_str, fullname);
opplace_found = 1;
}
}
else { else {
// Look for default opplace // Look for default opplace
pwr_tOid oid; pwr_tOid oid;
...@@ -681,10 +706,12 @@ void Xtt::opplace_selected_cb( void *ctx, char *text) ...@@ -681,10 +706,12 @@ void Xtt::opplace_selected_cb( void *ctx, char *text)
void Xtt::list_opplace() void Xtt::list_opplace()
{ {
char texts[20][80]; pwr_tOName texts[20];
pwr_tObjName name;
pwr_tStatus sts; pwr_tStatus sts;
pwr_tOid oid; pwr_tOid oid;
int i = 0; int i = 0;
for ( sts = gdh_GetClassList( pwr_cClass_OpPlace, &oid); for ( sts = gdh_GetClassList( pwr_cClass_OpPlace, &oid);
ODD(sts); ODD(sts);
...@@ -692,6 +719,10 @@ void Xtt::list_opplace() ...@@ -692,6 +719,10 @@ void Xtt::list_opplace()
sts = gdh_ObjidToName( oid, texts[i], sizeof(texts[0]), cdh_mNName); sts = gdh_ObjidToName( oid, texts[i], sizeof(texts[0]), cdh_mNName);
if ( EVEN(sts)) continue; if ( EVEN(sts)) continue;
sts = gdh_ObjidToName( oid, name, sizeof(name), cdh_mName_object);
if ( EVEN(sts) || cdh_NoCaseStrcmp( name, "opdefault") == 0)
continue;
i++; i++;
if ( i == (int)(sizeof(texts)/sizeof(texts[0]) - 2)) if ( i == (int)(sizeof(texts)/sizeof(texts[0]) - 2))
break; break;
...@@ -714,7 +745,7 @@ void Xtt::list_opplace() ...@@ -714,7 +745,7 @@ void Xtt::list_opplace()
} }
else else
// Select oplace from list // Select oplace from list
wow->CreateList( "Select Operator Place", (char *)texts, 80, opplace_selected_cb, 0, this); wow->CreateList( "Select Operator Place", (char *)texts, sizeof(pwr_tOName), opplace_selected_cb, 0, this);
} }
int Xtt::xnav_get_select( void *ctx, pwr_tAttrRef *attrref, int *is_attr) int Xtt::xnav_get_select( void *ctx, pwr_tAttrRef *attrref, int *is_attr)
......
xtt/mmi/xtt/src/xtt_alarm_active.png

453 Bytes | W: | H:

xtt/mmi/xtt/src/xtt_alarm_active.png

511 Bytes | W: | H:

xtt/mmi/xtt/src/xtt_alarm_active.png
xtt/mmi/xtt/src/xtt_alarm_active.png
xtt/mmi/xtt/src/xtt_alarm_active.png
xtt/mmi/xtt/src/xtt_alarm_active.png
  • 2-up
  • Swipe
  • Onion skin
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment