Commit 4c8d1d6f authored by Rafael Monnerat's avatar Rafael Monnerat

Prepare release 1.0.20

parents 4a0886b1 81f31e29
...@@ -3,8 +3,8 @@ parts = babeld ...@@ -3,8 +3,8 @@ parts = babeld
[babeld] [babeld]
recipe = slapos.recipe.cmmi recipe = slapos.recipe.cmmi
url = http://git.erp5.org/gitweb/babeld.git/snapshot/v1.6.2-nxd1.tar.xz url = https://lab.nexedi.com/nexedi/babeld/repository/archive.tar.gz?ref=v1.6.2-nxd1
md5sum = 336d25fd7630052ccb3a61d3603029b9 md5sum = b7137d7772fa670f4cec39838c4d7b1e
configure-command = configure-command =
echo "No configure.." echo "No configure.."
......
...@@ -12,8 +12,8 @@ parts = ...@@ -12,8 +12,8 @@ parts =
[curl] [curl]
recipe = slapos.recipe.cmmi recipe = slapos.recipe.cmmi
url = http://curl.haxx.se/download/curl-7.44.0.tar.bz2 url = http://curl.haxx.se/download/curl-7.47.0.tar.bz2
md5sum = 6b952ca00e5473b16a11f05f06aa8dae md5sum = 85c58a00412476993050cb242a3f365d
configure-options = configure-options =
--disable-static --disable-static
--disable-ldap --disable-ldap
...@@ -28,11 +28,15 @@ configure-options = ...@@ -28,11 +28,15 @@ configure-options =
--disable-gopher --disable-gopher
--enable-ipv6 --enable-ipv6
--disable-sspi --disable-sspi
--without-gnutls
--without-spnego
--with-ssl=${openssl:location}
--with-zlib=${zlib:location} --with-zlib=${zlib:location}
--with-ssl=${openssl:location}
--without-gnutls
--without-polarssl
--without-mbedtls
--without-cyassl
--without-nss --without-nss
--without-axtls
--without-libpsl
--without-libmetalink --without-libmetalink
--without-libssh2 --without-libssh2
--without-librtmp --without-librtmp
......
--- python-magic-0.4.10/magic.py.orig 2016-01-14 23:41:31.867145173 +0100
+++ python-magic-0.4.10/magic.py 2016-01-14 23:41:54.563401069 +0100
@@ -143,7 +143,7 @@
libmagic = None
# Let's try to find magic or magic1
-dll = ctypes.util.find_library('magic') or ctypes.util.find_library('magic1') or ctypes.util.find_library('cygmagic-1')
+dll = ctypes.util.find_library('magic') or ctypes.util.find_library('magic1') or ctypes.util.find_library('cygmagic-1') or 'libmagic.so'
# This is necessary because find_library returns None if it doesn't find the library
if dll:
...@@ -26,8 +26,8 @@ environment-extra = ...@@ -26,8 +26,8 @@ environment-extra =
[golang15] [golang15]
<= golang-common <= golang-common
url = https://storage.googleapis.com/golang/go1.5.2.src.tar.gz url = https://storage.googleapis.com/golang/go1.5.3.src.tar.gz
md5sum = 38fed22e7b80672291e7cba7fb9c3475 md5sum = 80a0eac7ab750b01b3f7096a1d4667b8
# go1.5 needs go1.4 to bootstrap # go1.5 needs go1.4 to bootstrap
environment-extra = environment-extra =
......
...@@ -13,8 +13,8 @@ extends = ...@@ -13,8 +13,8 @@ extends =
[groonga] [groonga]
recipe = slapos.recipe.cmmi recipe = slapos.recipe.cmmi
url = http://packages.groonga.org/source/groonga/groonga-5.1.1.tar.gz url = http://packages.groonga.org/source/groonga/groonga-5.1.2.tar.gz
md5sum = 50a869f710c005c0bb46ba7b790621fc md5sum = 04066b547f1f4dd869eb35ac52a2e88b
# temporary patch to respect more tokens in natural language mode. # temporary patch to respect more tokens in natural language mode.
patches = patches =
${:_profile_base_location_}/groonga.patch#9ed02fbe8400402d3eab47eee149978b ${:_profile_base_location_}/groonga.patch#9ed02fbe8400402d3eab47eee149978b
......
...@@ -74,12 +74,14 @@ make-targets= cd ${:path} && ${bundler:bundle} install ...@@ -74,12 +74,14 @@ make-targets= cd ${:path} && ${bundler:bundle} install
[helloweb-ruby] [helloweb-ruby]
recipe = slapos.cookbook:wrapper # NOTE slapos.cookbook:wrapper also works, but currently _only_ in instance
wrapper-path = ${buildout:bin-directory}/${:_buildout_section_name_} recipe = collective.recipe.template
environment = output = ${buildout:bin-directory}/${:_buildout_section_name_}
BUNDLE_GEMFILE = ${helloweb-ruby-bundle:path}/Gemfile mode = 0755
command-line = input = inline:
${bundler:bundle} exec sh -c 'helloweb.rb "$@"' ${:_buildout_section_name_} #!/bin/sh
export BUNDLE_GEMFILE=${helloweb-ruby-bundle:path}/Gemfile
exec ${bundler:bundle} exec sh -c 'helloweb.rb "$@"' ${:_buildout_section_name_} "$@"
# -*- go -*- # -*- go -*-
......
...@@ -28,5 +28,5 @@ md5sum = 3414d556788e14b4a154369e67eacaa3 ...@@ -28,5 +28,5 @@ md5sum = 3414d556788e14b4a154369e67eacaa3
[libpng] [libpng]
<= libpng-common <= libpng-common
url = http://download.sourceforge.net/libpng/libpng-1.6.20.tar.xz url = http://download.sourceforge.net/libpng/libpng-1.6.21.tar.xz
md5sum = 3968acb7c66ef81a9dab867f35d0eb4b md5sum = 3bacb4728f6694a64ad9052769d6a4ce
...@@ -21,9 +21,9 @@ parts = ...@@ -21,9 +21,9 @@ parts =
[mariadb] [mariadb]
recipe = slapos.recipe.cmmi recipe = slapos.recipe.cmmi
version = 10.1.10 version = 10.1.11
url = https://downloads.mariadb.org/f/mariadb-${:version}/source/mariadb-${:version}.tar.gz/from/http:/ftp.osuosl.org/pub/mariadb url = https://downloads.mariadb.org/f/mariadb-${:version}/source/mariadb-${:version}.tar.gz/from/http:/ftp.osuosl.org/pub/mariadb
md5sum = 9aa4d68b24c1ddd8cb56923a920684b3 md5sum = c199608ae4282f16007dc8c270ff2439
location = ${buildout:parts-directory}/${:_buildout_section_name_} location = ${buildout:parts-directory}/${:_buildout_section_name_}
patch-options = -p0 patch-options = -p0
patches = patches =
...@@ -68,8 +68,8 @@ post-install = ...@@ -68,8 +68,8 @@ post-install =
# mroonga - a storage engine for MySQL. It provides fast fulltext search feature to all MySQL users. # mroonga - a storage engine for MySQL. It provides fast fulltext search feature to all MySQL users.
# http://mroonga.github.com/ # http://mroonga.github.com/
recipe = slapos.recipe.cmmi recipe = slapos.recipe.cmmi
url = http://packages.groonga.org/source/mroonga/mroonga-5.11.tar.gz url = http://packages.groonga.org/source/mroonga/mroonga-5.12.tar.gz
md5sum = 0ca8525da3594685ec039d22a6ceec8d md5sum = b42816754058114de708e1da028399bd
pre-configure = pre-configure =
mkdir fake_mariadb_source && mkdir fake_mariadb_source &&
ln -s ${mariadb:location}/include/mysql/private fake_mariadb_source/sql ln -s ${mariadb:location}/include/mysql/private fake_mariadb_source/sql
......
...@@ -2,24 +2,33 @@ ...@@ -2,24 +2,33 @@
parts = parts =
openblas openblas
extends =
../gcc/buildout.cfg
[openblas] [openblas]
recipe = slapos.recipe.cmmi recipe = slapos.recipe.cmmi
# OpenBLAS 0.2.13 and 0.2.14 does not build on Broadwell url = http://github.com/xianyi/OpenBLAS/archive/v0.2.15.tar.gz
# CPU (Detecting CPU failed). But version 0.2.15 (which md5sum = b1190f3d3471685f17cfd1ec1d252ac9
# does not exist yet) will fix the issue. Until then you
# can add in options : build-common-options =
BINARY="$(uname -m | grep -q x86_64 && echo 64 || echo 32)" NO_STATIC=1 USE_OPENMP=1 USE_THREAD=1
# You can specify more options with openblas:build-ext-options parameter.
# Example :
# * to build generic binary that supports multiple architecture in one binary
# DYNAMIC_ARCH=1
# * to specify target explicitly
# (see https://github.com/xianyi/OpenBLAS/blob/v0.2.15/TargetList.txt )
# TARGET=HASWELL # TARGET=HASWELL
url = http://github.com/xianyi/OpenBLAS/archive/v0.2.14.tar.gz build-ext-options =
md5sum = 53cda7f420e1ba0ea55de536b24c9701
configure-command = true # First try with auto-detected target and if it fails try TARGET=GENERIC.
configure-command =
make ${:build-common-options} ${:build-ext-options} || make ${:build-common-options} TARGET=GENERIC
make-options = make-options =
PREFIX="${buildout:parts-directory}/${:_buildout_section_name_}" dummy
BINARY="$(uname -m | grep -q x86_64 && echo 64 || echo 32)" make-targets =
NO_STATIC=1 PREFIX="${buildout:parts-directory}/${:_buildout_section_name_}" install
USE_OPENMP=1
USE_THREAD=1
# to build generic binary that supports multiple architecture in one binary
# DYNAMIC_ARCH=1
environment = environment =
PATH=${gcc-fortran:location}/bin:%(PATH)s PATH=${gcc-fortran:location}/bin:%(PATH)s
LD_LIBRARY_PATH=${gcc-fortran:location}/lib:${gcc-fortran:location}/lib64 LD_LIBRARY_PATH=${gcc-fortran:location}/lib:${gcc-fortran:location}/lib64
......
...@@ -16,8 +16,12 @@ parts = ...@@ -16,8 +16,12 @@ parts =
[openssl] [openssl]
recipe = slapos.recipe.cmmi recipe = slapos.recipe.cmmi
url = https://www.openssl.org/source/openssl-1.0.2e.tar.gz url = https://www.openssl.org/source/openssl-1.0.2f.tar.gz
md5sum = 5262bfa25b60ed9de9f28d5d52d77fc5 md5sum = b3bf73f507172be9292ea2a8c28b659d
location = ${buildout:parts-directory}/${:_buildout_section_name_}
# 'prefix' option to override --openssldir/--prefix (which is useful
# when combined with INSTALL_PREFIX). Used by slapos.package.git/obs
prefix = ${:location}
patch-binary = ${patch:location}/bin/patch patch-binary = ${patch:location}/bin/patch
patches = patches =
${:_profile_base_location_}/openssl-nodoc.patch#a78c14908fe9ec624b1fb9fa97e01bb9 ${:_profile_base_location_}/openssl-nodoc.patch#a78c14908fe9ec624b1fb9fa97e01bb9
...@@ -28,14 +32,17 @@ configure-command = ./config ...@@ -28,14 +32,17 @@ configure-command = ./config
configure-options = configure-options =
-I${zlib:location}/include -I${zlib:location}/include
-L${zlib:location}/lib -L${zlib:location}/lib
--openssldir=${buildout:parts-directory}/${:_buildout_section_name_}/etc/ssl --openssldir=${:prefix}/etc/ssl
--prefix=${buildout:parts-directory}/${:_buildout_section_name_} --prefix=${:prefix}
--libdir=lib --libdir=lib
shared no-idea no-mdc2 no-rc5 zlib shared no-idea no-mdc2 no-rc5 zlib
-Wl,-rpath=${zlib:location}/lib -Wl,-rpath=${buildout:parts-directory}/${:_buildout_section_name_}/lib -Wl,-rpath=${zlib:location}/lib -Wl,-rpath=${:location}/lib
&& make depend && make depend
make-targets = make-targets =
all install_sw && rm -f ${buildout:parts-directory}/${:_buildout_section_name_}/etc/ssl/certs/* && for i in ${ca-certificates:location}/certs/*/*.crt; do ln -sv $i ${buildout:parts-directory}/${:_buildout_section_name_}/etc/ssl/certs/`${buildout:parts-directory}/${:_buildout_section_name_}/bin/openssl x509 -hash -noout -in $i`.0; done; true install_sw && x=${:location}/etc/ssl/certs && rm -f $x/* &&
for i in ${ca-certificates:location}/certs/*/*.crt; do
ln -sv $i $x/`${:location}/bin/openssl x509 -hash -noout -in $i`.0
; done
environment = environment =
PERL=${perl:location}/bin/perl PERL=${perl:location}/bin/perl
......
...@@ -3,10 +3,5 @@ ...@@ -3,10 +3,5 @@
[python-cliff] [python-cliff]
recipe = zc.recipe.egg:custom recipe = zc.recipe.egg:custom
egg = cliff egg = cliff
setup-eggs = ${python-cliff-prep:eggs} setup-eggs =
[python-cliff-prep]
recipe = zc.recipe.egg
eggs =
pbr pbr
...@@ -11,18 +11,10 @@ parts = ...@@ -11,18 +11,10 @@ parts =
recipe = zc.recipe.egg:custom recipe = zc.recipe.egg:custom
egg = cryptography egg = cryptography
environment = python-cryptography-env environment = python-cryptography-env
setup-eggs = ${python-cryptography-prep:eggs} setup-eggs = ${python-cffi:egg}
[python-cryptography-env] [python-cryptography-env]
PATH = ${pkgconfig:location}/bin:%(PATH)s PATH = ${pkgconfig:location}/bin:%(PATH)s
PKG_CONFIG_PATH = ${openssl:location}/lib/pkgconfig PKG_CONFIG_PATH = ${openssl:location}/lib/pkgconfig
LD_LIBRARY_PATH = ${openssl:location}/lib LD_LIBRARY_PATH = ${openssl:location}/lib
CPATH = ${openssl:location}/include CPATH = ${openssl:location}/include
[python-cryptography-prep]
recipe = zc.recipe.egg
eggs =
${python-cffi:egg}
enum34
pycparser
six
...@@ -18,7 +18,13 @@ parts = ...@@ -18,7 +18,13 @@ parts =
py py
firewalld-patch firewalld-patch
extensions -=
buildout-versions
extensions +=
slapos.rebootstrap
show-picked-versions = true
# separate from system python # separate from system python
include-site-packages = false include-site-packages = false
...@@ -118,3 +124,9 @@ eggs = ...@@ -118,3 +124,9 @@ eggs =
${slapos:eggs} ${slapos:eggs}
interpreter = py interpreter = py
scripts = py scripts = py
[versions]
setuptools = 19.6.2
slapos.rebootstrap = 3.3
zc.buildout = 2.5.0+slapos001
zc.recipe.egg = 2.0.3+slapos001
...@@ -39,6 +39,7 @@ This software release assigns the following port ranges by default: ...@@ -39,6 +39,7 @@ This software release assigns the following port ranges by default:
zeo 2100-2149 zeo 2100-2149
balancer 2150-2199 balancer 2150-2199
zope 2200-* zope 2200-*
jupyter 8888
==================== ========== ==================== ==========
Non-zope partitions are unique in an ERP5 cluster, so you shouldn't have to Non-zope partitions are unique in an ERP5 cluster, so you shouldn't have to
......
...@@ -219,7 +219,7 @@ ...@@ -219,7 +219,7 @@
] ]
}, },
"storage-dict": { "storage-dict": {
"description": "Storage configuration. For NEO, 'logfile' is automatically set (see http://git.erp5.org/gitweb/neoppod.git/blob/HEAD:/neo/client/component.xml for other settings).", "description": "Storage configuration. For NEO, 'logfile' is automatically set (see https://lab.nexedi.com/nexedi/neoppod/blob/master/neo/client/component.xml for other settings).",
"properties": { "properties": {
"ssl": { "ssl": {
"description": "For external NEO. Pass false if you want to disable SSL or pass custom values for ca/cert/key.", "description": "For external NEO. Pass false if you want to disable SSL or pass custom values for ca/cert/key.",
...@@ -235,6 +235,22 @@ ...@@ -235,6 +235,22 @@
"type": "object" "type": "object"
}, },
"type": "array" "type": "array"
},
"jupyter": {
"description": "Jupyter slave instance parameters",
"properties": {
"enable": {
"description": "Whether to enable creation of associated slave Jupyter instance",
"default": false,
"type": "boolean"
},
"zope-family": {
"description": "Zope family to connect Jupyter to by default",
"default": "<first instantiated Zope family>",
"type": "string"
}
},
"type": "object"
} }
} }
} }
...@@ -40,6 +40,11 @@ ...@@ -40,6 +40,11 @@
"description": "Relational database access information", "description": "Relational database access information",
"type": "string" "type": "string"
} }
"jupyter-url": {
"description": "Jupyter notebook web UI access information",
"type": "string",
"optional": true
}
}, },
"patternProperties": { "patternProperties": {
"family-.*": { "family-.*": {
......
# Upstream parameters for a GitLab instance
#
# Selected parameters - main ones - names and advanced defaults taken from omnibus-gitlab
# https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-config-template/gitlab.rb.template
# https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-cookbooks/gitlab/attributes/default.rb
#
# TODO better autogenerate from ^^^ (?)
#
# (last updated for omnibus-gitlab 8.2.3+ce.0-0-g8eda093)
[gitlab-parameters]
configuration.external_url = http://lab.example.com
# db advanced
configuration.db_pool = 10
# rack-attack
configuration.rate_limit_requests_per_period = 10
configuration.rate_limit_period = 60
configuration.time_zone = UTC
configuration.email_enabled = true
configuration.email_from = lab@example.com
configuration.email_display_name = GitLab
configuration.email_reply_to = noreply@example.com
configuration.smtp_enable = true
configuration.smtp_address = smtp.server
configuration.smtp_port = 465
configuration.smtp_user_name = smtp user
configuration.smtp_password = smtp password
configuration.smtp_domain = lab.example.com
configuration.smtp_authentication = login
configuration.smtp_enable_starttls_auto = true
# none | peer | client_once | fail_if_no_peer_cert -> see gitlab-omnibus links at top
configuration.smtp_openssl_verify_mode = peer
configuration.default_can_create_group = true
configuration.username_changing_enabled = true
configuration.default_theme = 2
configuration.default_projects_features.issues = true
configuration.default_projects_features.merge_requests = true
configuration.default_projects_features.wiki = true
configuration.default_projects_features.snippets = true
# NOTE can be public|private|internal
configuration.default_projects_features.visibility_level= public
#configuration.default_projects_features.builds = false
configuration.webhook_timeout = 10
# 0 means forever (seconds)
configuration.backup_keep_time = 0
# NOTE empty = default gitlab limits
configuration.git_max_size =
configuration.git_timeout =
# sidekiq
configuration.sidekiq_shutdown_timeout = 4
configuration.sidekiq_concurrency = 25
configuration.sidekiq_memory_killer_max_rss = 1000000
# unicorn
configuration.unicorn_worker_timeout = 60
configuration.unicorn_worker_processes = 2
# unicorn advanced
configuration.unicorn_backlog_socket = 1024
configuration.unicorn_worker_memory_limit_min = 200*(1024**2)
configuration.unicorn_worker_memory_limit_max = 250*(1024**2)
# nginx
configuration.nginx_client_max_body_size = 250m
# NOTE: we don't really need old ciphers - usually we talk directly to frontend only
configuration.nginx_ssl_ciphers = ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA256:ECDHE-RSA-AES256-SHA:ECDHE-RSA-AES128-SHA:ECDHE-RSA-DES-CBC3-SHA:AES256-GCM-SHA384:AES128-GCM-SHA256:AES256-SHA256:AES128-SHA256:AES256-SHA:AES128-SHA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!MD5:!PSK:!RC4
configuration.nginx_ssl_prefer_server_ciphers = on
configuration.nginx_ssl_protocols = TLSv1 TLSv1.1 TLSv1.2
# the following is gitlab-omnibus default but not nginx's default
configuration.nginx_ssl_session_cache = builtin:1000 shared:SSL:10m
configuration.nginx_ssl_session_timeout = 5m
configuration.nginx_proxy_read_timeout = 300
configuration.nginx_proxy_connect_timeout = 300
# nginx advanced
configuration.nginx_worker_processes = 4
configuration.nginx_worker_connections = 10240
configuration.nginx_log_format = $remote_addr - $remote_user [$time_local] "$request" $status $body_bytes_sent "$http_referer" "$http_user_agent"
configuration.nginx_sendfile = on
configuration.nginx_tcp_nopush = on
configuration.nginx_tcp_nodelay = on
configuration.nginx_gzip = on
configuration.nginx_gzip_http_version = 1.0
configuration.nginx_gzip_comp_level = 2
configuration.nginx_gzip_proxied = any
configuration.nginx_gzip_types = text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript application/json
configuration.nginx_keepalive_timeout = 65
#!{{ bash_bin }}
# start up gitlab's unicorn with first making sure db is properly setup and all
# migrations are up as pre-condition.
RAKE={{ gitlab_rake }}
die() {
echo "$*" 1>&2
exit 1
}
# 1. what to do when instance is initially setup
# see
# https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-cookbooks/gitlab/recipes/database_migrations.rb
# https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-cookbooks/gitlab/recipes/postgresql.rb
# initial db setup
pgtables="$({{ psql_bin }} \
-h {{ pgsql['pgdata-directory'] }} \
-U {{ pgsql.superuser }} \
-d {{ pgsql.dbname }} \
-c '\d')" || die "pg query problem"
if echo "$pgtables" | grep -q '^No relations found' ; then
$RAKE db:schema:load db:seed_fu || die "initial db setup failed"
fi
# re-build ssh keys
# (we do not use them - just for cleannes)
force=yes $RAKE gitlab:shell:setup || die "gitlab:shell:setup failed"
# 2. what to do when instance is upgraded
# see
# https://gitlab.com/gitlab-org/gitlab-ce/blob/master/lib/support/deploy/deploy.sh
# https://gitlab.com/gitlab-org/gitlab-ce/blob/master/lib/gitlab/upgrader.rb
# https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-cookbooks/gitlab/recipes/gitlab-rails.rb
# https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-ctl-commands/upgrade.rb
#
# Assets compilation is handled at instance deployment time. We do everything else here.
# make sure all migrations are up
migrate_log="{{ log_dir }}/db-migrate-`date +%s`.log"
$RAKE db:migrate >$migrate_log 2>&1 || die "db:migrate failed"
# if it was a no-op "migration" - we don't need info about that - only keep
# logs of actual migration run.
test -s $migrate_log || rm $migrate_log
# clear cache
$RAKE cache:clear || die "cache:clear failed"
# 3. finally exec to unicorn
exec {{ gitlab_unicorn }} \
-E production \
-c {{ unicorn_rb.rendered }} \
{{ gitlab_work.location }}/config.ru
This diff is collapsed.
# GitLab "switch-softwaretype" instance
[buildout]
parts = switch-softwaretype
# std stuff for slapos instance
eggs-directory = ${buildout:eggs-directory}
develop-eggs-directory = ${buildout:develop-eggs-directory}
offline = true
[switch-softwaretype]
recipe = slapos.cookbook:softwaretype
default = $${instance-gitlab.cfg:rendered}
# TODO -export, -import, -pull-backup
[instance-gitlab.cfg]
recipe = slapos.recipe.template:jinja2
mode = 0644
template= ${instance-gitlab.cfg.in:target}
rendered= $${buildout:directory}/instance-gitlab.cfg
context =
import os os
import pwd pwd
import multiprocessing multiprocessing
key eggs_directory buildout:eggs-directory
key develop_eggs_directory buildout:develop-eggs-directory
raw gitlab_repository_location ${gitlab-repository:location}
raw gitlab_shell_repository_location ${gitlab-shell-repository:location}
# program binaries
raw bash_bin ${bash:location}/bin/bash
raw bundler_4gitlab ${bundler-4gitlab:bundle}
raw curl_bin ${curl:location}/bin/curl
raw dcron_bin ${dcron-output:crond}
raw git ${git:location}/bin/git
raw git_location ${git:location}
raw gitlab_workhorse ${gitlab-workhorse:location}/gitlab-workhorse
raw gunzip_bin ${gzip:location}/bin/gunzip
raw gzip_bin ${gzip:location}/bin/gzip
raw logrotate_bin ${logrotate:location}/usr/sbin/logrotate
raw nginx_bin ${nginx-output:nginx}
raw nginx_mime_types ${nginx-output:mime}
raw openssl_bin ${openssl-output:openssl}
raw postgresql_location ${postgresql92:location}
raw redis_binprefix ${redis28:location}/bin
raw ruby_location ${bundler-4gitlab:ruby-location}
raw watcher_sigkill ${watcher-sigkill:rendered}
# config files
raw config_ru_in ${config.ru.in:target}
raw database_yml_in ${database.yml.in:target}
raw gitconfig_in ${gitconfig.in:target}
raw gitlab_parameters_cfg ${gitlab-parameters.cfg:target}
raw gitlab_shell_config_yml_in ${gitlab-shell-config.yml.in:target}
raw gitlab_unicorn_startup_in ${gitlab-unicorn-startup.in:target}
raw gitlab_yml_in ${gitlab.yml.in:target}
raw macrolib_cfg_in ${macrolib.cfg.in:target}
raw nginx_conf_in ${nginx.conf.in:target}
raw nginx_gitlab_http_conf_in ${nginx-gitlab-http.conf.in:target}
raw rack_attack_rb_in ${rack_attack.rb.in:target}
raw resque_yml_in ${resque.yml.in:target}
raw smtp_settings_rb_in ${smtp_settings.rb.in:target}
raw unicorn_rb_in ${unicorn.rb.in:target}
{# common macros for gitlab instance #}
{# cfg(name) -> instance_parameter:configuration.<name> #}
{% macro cfg(name) %}{{ instance_parameter[str("configuration." + name)] }}{% endmacro %}
{# cfg_bool(name) - like cfg(name), but returns 'true'/''
NOTE macros can return only strings - that's why '' is used for false #}
{% macro cfg_bool(name) %}{{ 'true' if (cfg(name).lower() in ('true', 'yes')) else '' }}{% endmacro %}
{# deduce whether to use https from external url
( here - becasue we cannot use jinja2 logic in instance-gitlab.cfg.in to
process instance parameters ) #}
{% set external_url = urlparse.urlparse(cfg('external_url')) %}
{% set cfg_https = (true if external_url.scheme == 'https' else false) %}
{# for convenience #}
{% set fqdn = external_url.hostname %}
# GitLab software-release
[buildout]
extends =
../../stack/slapos.cfg
../../component/ruby/buildout.cfg
../../component/golang/buildout.cfg
../../component/postgresql/buildout.cfg
../../component/redis/buildout.cfg
../../component/cmake/buildout.cfg
../../component/icu/buildout.cfg
../../component/pkgconfig/buildout.cfg
../../component/nodejs/buildout.cfg
../../component/openssl/buildout.cfg
../../component/nginx/buildout.cfg
# for instance
../../component/bash/buildout.cfg
../../component/curl/buildout.cfg
../../component/gzip/buildout.cfg
../../component/dcron/buildout.cfg
../../component/logrotate/buildout.cfg
parts =
ruby2.1
golang15
git
postgresql92
redis28
cmake
icu
pkgconfig
nginx-output
python-4gitlab
gitlab-shell/vendor
gitlab/vendor/bundle
gitlab-workhorse
# for instance
instance.cfg
slapos-cookbook
eggs
bash
curl
watcher-sigkill
gzip
dcron-output
logrotate
############################
# Software compilation #
############################
# python with eggs, that will be used in gitlab
[python-4gitlab]
# NOTE cannot use zc.recipe.egg - github-markup invoks `python2 -S` and
# interpreter generated by zc.recipe.egg cannot handle that.
recipe = z3c.recipe.scripts
# NOTE github-markup invokes it as `python2`, that's why we are naming it this way
# https://github.com/github/markup/blob/5393ae93/lib/github/markups.rb#L36
interpreter = python2
eggs =
docutils
# rubygemsrecipe with fixed url and this way pinned rubygems version
[rubygemsrecipe]
recipe = rubygemsrecipe
url = https://rubygems.org/rubygems/rubygems-2.5.1.zip
# bundler, that we'll use to
# - install gems for gitlab
# - run gitlab services / jobs (via `bundle exec ...`)
[bundler-4gitlab]
<= rubygemsrecipe
ruby-location = ${ruby2.1:location}
ruby-executable = ${:ruby-location}/bin/ruby
gems = bundler==1.11.2
# bin installed here
bundle = ${buildout:bin-directory}/bundle
# install together with dependencies of gitlab, which we cannot specify using
# --with-... gem option
# ( reason: rubygemsrecipe hardcodes PATH inside generated bin/* and it is
# impossible to adjust it later )
#
# bundle exec <smth> ; <smth> starts with `#!/usr/bin/env ruby` as rubygems
# Rugged needs: cmake, pkgconfig
# execjs needs: nodejs
# rails needs db client program on path: psql
# gitlab wants to check redis version via running: redis-cli
# gitlab (via github-markup) wants to convert rst -> html via running: python2 (with docutils egg)
# (python-4gitlab puts interpreter into ${buildout:bin-directory})
environment =
PATH = ${:ruby-location}/bin:${cmake:location}/bin:${pkgconfig:location}/bin:${nodejs:location}/bin:${postgresql92:location}/bin:${redis28:location}/bin:${buildout:bin-directory}:%(PATH)s
# gitlab, gitlab-shell & gitlab-workhorse checked out as git repositories
# pinned to exact commit
[git-repository]
recipe = slapos.recipe.build:gitclone
git-executable = ${git:location}/bin/git
[gitlab-repository]
<= git-repository
#repository = https://gitlab.com/gitlab-org/gitlab-ce.git
repository = https://lab.nexedi.com/kirr/gitlab-ce.git
# 8.2.X + NXD patches:
revision = v8.2.3-9-g79c127e6e068a619c53a8c22f1db8c1e28ec87d2
location = ${buildout:parts-directory}/gitlab
[gitlab-shell-repository]
<= git-repository
repository = https://gitlab.com/gitlab-org/gitlab-shell.git
# gitlab 8.2 wants gitlab-shell 2.6.8
# 2.6.8 + NXD patches
revision = v2.6.8-2-g216d7e15fe06917198891a895f762ba84fdcc4d4
location = ${buildout:parts-directory}/gitlab-shell
[gitlab-workhorse-repository]
<= git-repository
#repository = https://gitlab.com/gitlab-org/gitlab-workhorse.git
repository = https://lab.nexedi.com/kirr/gitlab-workhorse.git
# 0.4.X + NXD patches for blob download speedup
# (https://gitlab.com/gitlab-org/gitlab-workhorse/merge_requests/17)
revision = 0.4.1-23-g2beb8c9539433f072e3db540f91f75894ca6b1b0
location = ${buildout:parts-directory}/gitlab-workhorse
# build needed-by-gitlab gems via bundler
[gitlab/vendor/bundle]
recipe = slapos.recipe.cmmi
path = ${gitlab-repository:location}
bundle = ${bundler-4gitlab:bundle}
configure-command = cd ${:path} &&
${:bundle} config --local build.charlock_holmes --with-icu-dir=${icu:location} &&
${:bundle} config --local build.pg --with-pg-config=${postgresql92:location}/bin/pg_config
make-binary =
make-targets= cd ${:path} &&
${:bundle} install --deployment --without development test mysql kerberos
# build needed-by-gitlab-shell gems via bundler
# ( there is not vendor/ dir in gitlab-shell, so to avoid having buildout error
# on mkdir vendor/bundle, this part name is just /vendor )
[gitlab-shell/vendor]
recipe = slapos.recipe.cmmi
path = ${gitlab-shell-repository:location}
bundle = ${bundler-4gitlab:bundle}
configure-command = true
make-binary =
make-targets= cd ${:path} &&
${:bundle} install --deployment --without development test
# build gitlab-workhorse
[gitlab-workhorse]
recipe = slapos.recipe.cmmi
path = ${gitlab-workhorse-repository:location}
configure-command = :
make-targets= ${:_buildout_section_name_}
environment =
PATH=${golang15:location}/bin:%(PATH)s
###############################
# Trampoline for instance #
###############################
# eggs for instance.cfg
[eggs]
recipe = zc.recipe.egg
eggs =
plone.recipe.command
cns.recipe.symlink
[instance.cfg]
recipe = slapos.recipe.template
url = ${:_profile_base_location_}/instance.cfg.in
output = ${buildout:directory}/instance.cfg
md5sum = b40cd8824b978da867404d8955b06c18
[watcher-sigkill]
recipe = slapos.recipe.template:jinja2
template= ${:_profile_base_location_}/${:_buildout_section_name_}.in
rendered= ${buildout:bin-directory}/${:_buildout_section_name_}
mode = 0755
md5sum = 2986dcb006dc9e8508ff81f646656131
context =
section bash bash
# macro: download a file named as section name
#
# [filename]
# <= download-file
# md5sum = ...
[download-file]
recipe = slapos.recipe.build:download
url = ${:_profile_base_location_}/${:_buildout_section_name_}
destination = ${buildout:directory}/${:_buildout_section_name_}
# like download-file, but download from template/<filename>
[download-template]
<= download-file
url = ${:_profile_base_location_}/template/${:_buildout_section_name_}
[config.ru.in]
<= download-template
md5sum = bb12852c28079f40a0751f7f3559e2a6
[database.yml.in]
<= download-template
md5sum = ee656cfd96e1c82df167f68bb5773291
[gitconfig.in]
<= download-template
md5sum = f4cb11e8bca379e016b062d0db859b74
[gitlab-parameters.cfg]
<= download-file
md5sum = bc98ec10209bc53f6a49888b1a2b9382
[gitlab-shell-config.yml.in]
<= download-template
md5sum = ea351e16b47f0008f61211eb2d7685e2
[gitlab-unicorn-startup.in]
<= download-file
md5sum = 2716afaa9445c0c429c6b211356ebe8f
[gitlab.yml.in]
<= download-template
md5sum = cc32f5053dd2a2461aa5952a5b925310
[instance-gitlab.cfg.in]
<= download-file
md5sum = dfd2b14f846eda999fe9d12108d513b4
[macrolib.cfg.in]
<= download-file
md5sum = a56a44e96f65f5ed20211bb6a54279f4
[nginx-gitlab-http.conf.in]
<= download-template
md5sum = 590da2b00cd198c7bc261c3d893bc199
[nginx.conf.in]
<= download-template
md5sum = f1a6e2bce3f28a2243fed49d1e1601df
[rack_attack.rb.in]
<= download-template
md5sum = 16503c029159ea6db7d0fb5ab67093a3
[resque.yml.in]
<= download-template
md5sum = 7d9cba658f9315cd058dfc74db943a66
[smtp_settings.rb.in]
<= download-template
md5sum = c7c09c241b5fa8163e4995260be52604
[unicorn.rb.in]
<= download-template
md5sum = 9bdca16362fe19c727bca38383e57068
[versions]
cns.recipe.symlink = 0.2.3
docutils = 0.12
plone.recipe.command = 1.1
rubygemsrecipe = 0.2.2
slapos.recipe.template = 2.9
z3c.recipe.scripts = 1.0.1
{{ autogenerated }}
# see:
# https://gitlab.com/gitlab-org/gitlab-ce/blob/master/config.ru
# https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-cookbooks/gitlab/templates/default/gitlab-rails-config.ru.erb
# (last updated for omnibus-gitlab 8.2.3+ce.0-0-g8eda093)
# This file is used by Rack-based servers to start the application.
{% from 'macrolib.cfg.in' import cfg with context %}
if defined?(Unicorn)
require 'unicorn'
if ENV['RAILS_ENV'] == 'production' || ENV['RAILS_ENV'] == 'staging'
# Unicorn self-process killer
require 'unicorn/worker_killer'
# Max memory size (RSS) per worker
use Unicorn::WorkerKiller::Oom, ({{ cfg('unicorn_worker_memory_limit_min') }}), ({{ cfg('unicorn_worker_memory_limit_max') }})
end
end
require ::File.expand_path('../config/environment', __FILE__)
map ENV['RAILS_RELATIVE_URL_ROOT'] || "/" do
run Gitlab::Application
end
{{ autogenerated }}
# see:
# https://gitlab.com/gitlab-org/gitlab-ce/blob/master/config/database.yml.postgresql
# https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-cookbooks/gitlab/templates/default/database.yml.erb
# (last updated for 8.2.3+ce.0-0-g8eda093)
{% from 'macrolib.cfg.in' import cfg with context %}
production:
adapter: postgresql
encoding: unicode
{# collation is mainly for mysql
collation: <%= @db_collation %>
#}
database: {{ pgsql.dbname }}
pool: {{ cfg('db_pool') }}
{# XXX is it ok to use superuser, even if the whole database is only for gitlab? #}
username: '{{ pgsql.superuser }}'
{# we have no password - access is via unix socket #}
password:
host: '{{ pgsql["pgdata-directory"] }}'
port:
socket:
{# not needed for unix socket
sslmode: <%= single_quote(@db_sslmode) %>
sslrootcert: <%= single_quote(@db_sslrootcert) %>
#}
{{ autogenerated }}
# global git configuration for GitLab
# see:
# https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-cookbooks/gitlab/attributes/default.rb
# https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-cookbooks/gitlab/templates/default/gitconfig.erb
# (last updated for omnibus-gitlab 8.2.3+ce.0-0-g8eda093)
#
{% from 'macrolib.cfg.in' import cfg with context %}
# don't waste memory when packing (each thread uses own work memory)
# besides it packs better with 1 thread
[pack]
threads = 1
# don't allow corrupt/broken objects to go in
[receive]
fsckObjects = true
[user]
name = {{ cfg('email_display_name') }}
email = {{ cfg('email_from') }}
[core]
autocrlf = input
{{ autogenerated }}
# see:
# https://gitlab.com/gitlab-org/gitlab-shell/blob/master/config.yml.example
# https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-cookbooks/gitlab/templates/default/gitlab-shell-config.yml.erb
# (last updated for omnibus-gitlab 8.2.3+ce.0-0-g8eda093)
# GitLab user. git by default
user: {{ backend_info.user }}
# Url to gitlab instance. Used for api calls. Should end with a slash.
gitlab_url: "http+unix://{{ urllib.quote_plus(unicorn.socket) }}/"
http_settings:
{# we don't need any
<%= @http_settings.to_json if @http_settings %>
#}
# user: someone
# password: somepass
# ca_file: /etc/ssl/cert.pem
# ca_path: /etc/pki/tls/certs
# self_signed_cert: false
# Repositories path
# Give the canonicalized absolute pathname,
# REPOS_PATH MUST NOT CONTAIN ANY SYMLINK!!!
# Check twice that none of the components is a symlink, including "/home".
repos_path: "{{ gitlab.repositories }}"
# File used as authorized_keys for gitlab user
# NOTE not used in slapos version (all access via https only)
auth_file: "{{ gitlab.var }}/sshkeys-notused"
# File that contains the secret key for verifying access to GitLab.
# Default is .gitlab_shell_secret in the root directory.
secret_file: "{{ gitlab_shell.secret }}"
# Redis settings used for pushing commit notices to gitlab
redis:
bin: {{ redis_binprefix }}/redis-cli
host: {# <%= @redis_host %> #}
port: {# <%= @redis_port %> #}
socket: {{ service_redis.unixsocket }}
{# we don't use password for redis
<% if @redis_password %>
pass: <%= @redis_password %>
<% end %>
#}
database: {# <%= @redis_database %> #}
namespace: resque:gitlab
# Log file.
# Default is gitlab-shell.log in the root directory.
log_file: "{{ gitlab_shell.log }}/gitlab-shell.log"
# Log level. INFO by default
log_level:
# Audit usernames.
# Set to true to see real usernames in the logs instead of key ids, which is easier to follow, but
# incurs an extra API call on every gitlab-shell command.
audit_usernames:
# Enable git-annex support
# git-annex allows managing files with git, without checking the file contents into git
# See https://git-annex.branchable.com/ for documentation
# If enabled, git-annex needs to be installed on the server where gitlab-shell is setup
# For Debian and Ubuntu systems this can be done with: sudo apt-get install git-annex
# For CentOS: sudo yum install epel-release && sudo yum install git-annex
git_annex_enabled:
This diff is collapsed.
{{ autogenerated }}
# see:
# https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-cookbooks/gitlab/templates/default/nginx-gitlab-http.conf.erb
# (last updated for omnibus-gitlab 8.2.3+ce.0-0-g8eda093)
{% from 'macrolib.cfg.in' import cfg, cfg_bool, cfg_https, fqdn with context %}
## GitLab
## Modified from https://gitlab.com/gitlab-org/gitlab-ce/blob/master/lib/support/nginx/gitlab-ssl & https://gitlab.com/gitlab-org/gitlab-ce/blob/master/lib/support/nginx/gitlab
##
## Lines starting with two hashes (##) are comments with information.
## Lines starting with one hash (#) are configuration parameters that can be uncommented.
##
##################################
## CHUNKED TRANSFER ##
##################################
##
## It is a known issue that Git-over-HTTP requires chunked transfer encoding [0]
## which is not supported by Nginx < 1.3.9 [1]. As a result, pushing a large object
## with Git (i.e. a single large file) can lead to a 411 error. In theory you can get
## around this by tweaking this configuration file and either:
## - installing an old version of Nginx with the chunkin module [2] compiled in, or
## - using a newer version of Nginx.
##
## At the time of writing we do not know if either of these theoretical solutions works.
## As a workaround users can use Git over SSH to push large files.
##
## [0] https://git.kernel.org/cgit/git/git.git/tree/Documentation/technical/http-protocol.txt#n99
## [1] https://github.com/agentzh/chunkin-nginx-module#status
## [2] https://github.com/agentzh/chunkin-nginx-module
##
###################################
## configuration ##
###################################
upstream gitlab {
server unix:{{ unicorn.socket }} fail_timeout=0;
}
upstream gitlab-workhorse {
server unix:{{ gitlab_workhorse.socket }};
}
{# not needed for us - the frontend can do the redirection and also
gitlab/nginx speaks HSTS on https port so when we access https port via http
protocol, it gets redirected to https
<% if @https && @redirect_http_to_https %>
## Redirects all HTTP traffic to the HTTPS host
server {
<% @listen_addresses.each do |listen_address| %>
listen <%= listen_address %>:<%= @redirect_http_to_https_port %>;
<% end %>
server_name <%= @fqdn %>;
server_tokens off; ## Don't show the nginx version number, a security best practice
return 301 https://<%= @fqdn %>:<%= @port %>$request_uri;
access_log <%= @log_directory %>/gitlab_access.log gitlab_access;
error_log <%= @log_directory %>/gitlab_error.log;
}
<% end %>
#}
server {
listen [{{ backend_info.host }}]:{{ backend_info.port }}{% if cfg_https %} ssl spdy{% endif %};
{# we don't use: kerbeeros
<% if @kerberos_enabled && @kerberos_use_dedicated_port %>
listen <%= listen_address %>:<%= @kerberos_port %><% if @kerberos_https %> ssl<% end %>;
<% end %>
#}
server_name {{ fqdn }};
server_tokens off; ## Don't show the nginx version number, a security best practice
root {{ gitlab_work.location }}/public;
## Increase this if you want to upload large attachments
## Or if you want to accept large git objects over http
client_max_body_size {{ cfg('nginx_client_max_body_size') }};
{% if cfg_https %}
## Strong SSL Security
## https://raymii.org/s/tutorials/Strong_SSL_Security_On_nginx.html & https://cipherli.st/
ssl on;
ssl_certificate {{ nginx.cert_file }};
ssl_certificate_key {{ nginx.key_file }};
{# we don't need - most root CA will be included by default
<% if @ssl_client_certificate %>
ssl_client_certificate <%= @ssl_client_certificate%>;
<% end %>
#}
# GitLab needs backwards compatible ciphers to retain compatibility with Java IDEs
# NOTE(slapos) ^^^ is not relevant for us - we are behind frontend and clients
# directly connects to frontend
ssl_ciphers '{{ cfg("nginx_ssl_ciphers") }}';
ssl_protocols {{ cfg('nginx_ssl_protocols') }};
ssl_prefer_server_ciphers {{ cfg('nginx_ssl_prefer_server_ciphers') }};
ssl_session_cache {{ cfg('nginx_ssl_session_cache') }};
ssl_session_timeout {{ cfg('nginx_ssl_session_timeout') }};
{# we do not use: ssl_dhparam
<% if @ssl_dhparam %>
ssl_dhparam <%= @ssl_dhparam %>;
<% end %>
#}
{% endif %}
## Individual nginx logs for this GitLab vhost
access_log {{ nginx.log }}/gitlab_access.log gitlab_access;
error_log {{ nginx.log }}/gitlab_error.log;
location / {
## Serve static files from defined root folder.
## @gitlab is a named location for the upstream fallback, see below.
try_files $uri /index.html $uri.html @gitlab;
}
location /uploads/ {
## If you use HTTPS make sure you disable gzip compression
## to be safe against BREACH attack.
{{ 'gzip off;' if cfg_https else ''}}
## https://github.com/gitlabhq/gitlabhq/issues/694
## Some requests take more than 30 seconds.
proxy_read_timeout {{ cfg('nginx_proxy_read_timeout') }};
proxy_connect_timeout {{ cfg('nginx_proxy_connect_timeout') }};
proxy_redirect off;
proxy_set_header Host $http_host;
proxy_set_header X-Real-IP $remote_addr;
{% if cfg_https %}
proxy_set_header X-Forwarded-Ssl on;
{% endif %}
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto {{ "https" if cfg_https else "http" }};
proxy_set_header X-Frame-Options SAMEORIGIN;
proxy_pass http://gitlab;
}
## If a file, which is not found in the root folder is requested,
## then the proxy passes the request to the upsteam (gitlab unicorn).
location @gitlab {
## If you use HTTPS make sure you disable gzip compression
## to be safe against BREACH attack.
{{ 'gzip off;' if cfg_https else ''}}
## https://github.com/gitlabhq/gitlabhq/issues/694
## Some requests take more than 30 seconds.
proxy_read_timeout {{ cfg('nginx_proxy_read_timeout') }};
proxy_connect_timeout {{ cfg('nginx_proxy_connect_timeout') }};
proxy_redirect off;
proxy_set_header Host $http_host;
proxy_set_header X-Real-IP $remote_addr;
{% if cfg_https %}
proxy_set_header X-Forwarded-Ssl on;
{% endif %}
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto {{ "https" if cfg_https else "http" }};
proxy_set_header X-Frame-Options SAMEORIGIN;
proxy_pass http://gitlab;
}
location ~ ^/[\w\.-]+/[\w\.-]+/gitlab-lfs/objects {
client_max_body_size 0;
# 'Error' 418 is a hack to re-use the @gitlab-workhorse block
error_page 418 = @gitlab-workhorse;
return 418;
}
location ~ ^/[\w\.-]+/[\w\.-]+/(info/refs|git-upload-pack|git-receive-pack)$ {
client_max_body_size 0;
# 'Error' 418 is a hack to re-use the @gitlab-workhorse block
error_page 418 = @gitlab-workhorse;
return 418;
}
location ~ ^/[\w\.-]+/[\w\.-]+/repository/archive {
client_max_body_size 0;
# 'Error' 418 is a hack to re-use the @gitlab-workhorse block
error_page 418 = @gitlab-workhorse;
return 418;
}
location ~ ^/api/v3/projects/.*/repository/archive {
client_max_body_size 0;
# 'Error' 418 is a hack to re-use the @gitlab-workhorse block
error_page 418 = @gitlab-workhorse;
return 418;
}
# Build artifacts should be submitted to this location
location ~ ^/[\w\.-]+/[\w\.-]+/builds/download {
client_max_body_size 0;
# 'Error' 418 is a hack to re-use the @gitlab-workhorse block
error_page 418 = @gitlab-workhorse;
return 418;
}
# Build artifacts should be submitted to this location
location ~ /ci/api/v1/builds/[0-9]+/artifacts {
client_max_body_size 0;
# 'Error' 418 is a hack to re-use the @gitlab-workhorse block
error_page 418 = @gitlab-workhorse;
return 418;
}
# access to raw blobs -> @gitlab-workhorse
location ~ ^/[\w\.-]+/[\w\.-]+/raw/ {
client_max_body_size 0;
error_page 418 = @gitlab-workhorse;
return 418;
}
location @gitlab-workhorse {
client_max_body_size 0;
## If you use HTTPS make sure you disable gzip compression
## to be safe against BREACH attack.
{{ 'gzip off;' if cfg_https else ''}}
## https://github.com/gitlabhq/gitlabhq/issues/694
## Some requests take more than 30 seconds.
proxy_read_timeout {{ cfg('nginx_proxy_read_timeout') }};
proxy_connect_timeout {{ cfg('nginx_proxy_connect_timeout') }};
proxy_redirect off;
proxy_set_header Host $http_host;
proxy_set_header X-Real-IP $remote_addr;
{% if cfg_https %}
proxy_set_header X-Forwarded-Ssl on;
{% endif %}
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto {{ "https" if cfg_https else "http" }};
proxy_pass http://gitlab-workhorse;
}
## Enable gzip compression as per rails guide:
## http://guides.rubyonrails.org/asset_pipeline.html#gzip-compression
## WARNING: If you are using relative urls remove the block below
## See config/application.rb under "Relative url support" for the list of
## other files that need to be changed for relative url support
location ~ ^/(assets)/ {
root {{ gitlab_work.location }}/public;
gzip_static on; # to serve pre-gzipped version
expires max;
add_header Cache-Control public;
}
error_page 502 /502.html;
{# we don't support custom nginx configs
<%= @custom_gitlab_server_config %>
#}
}
{{ autogenerated }}
# see:
# https://gitlab.com/gitlab-org/gitlab-ce/blob/master/lib/support/nginx/gitlab-ssl
# https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-cookbooks/gitlab/templates/default/nginx.conf.erb
# (last updated for omnibus-gitlab 8.2.3+ce.0-0-g8eda093)
{% from 'macrolib.cfg.in' import cfg with context %}
# user directive makes sense only when running initially as root
# (and nginx will complain if not and directive given)
# user {{ backend_info.user }};
worker_processes {{ cfg('nginx_worker_processes') }};
error_log stderr;
pid {{ directory.run }}/nginx.pid;
daemon off;
events {
worker_connections {{ cfg('nginx_worker_connections') }};
}
http {
log_format gitlab_access '{{ cfg("nginx_log_format") }}';
{# we do not use: ci, mattermost
log_format gitlab_ci_access '<%= @gitlab_ci_access_log_format %>';
log_format gitlab_mattermost_access '<%= @gitlab_mattermost_access_log_format %>';
#}
sendfile {{ cfg('nginx_sendfile') }};
tcp_nopush {{ cfg('nginx_tcp_nopush') }};
tcp_nodelay {{ cfg('nginx_tcp_nodelay') }};
keepalive_timeout {{ cfg('nginx_keepalive_timeout') }};
gzip {{ cfg('nginx_gzip') }};
gzip_http_version {{ cfg('nginx_gzip_http_version') }};
gzip_comp_level {{ cfg('nginx_gzip_comp_level') }};
gzip_proxied {{ cfg('nginx_gzip_proxied') }};
gzip_types {{ cfg('nginx_gzip_types') }};
include {{ nginx_mime_types }};
include {{ nginx_gitlab_http_conf }};
{# we don't need: ci, mattermost
include <%= @gitlab_ci_http_config %>
include <%= @gitlab_mattermost_http_config %>
#}
}
{{ autogenerated }}
# see:
# https://gitlab.com/gitlab-org/gitlab-ce/blob/master/config/initializers/rack_attack.rb.example
# https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-cookbooks/gitlab/templates/default/rack_attack.rb.erb
# (last updated for omnibus-gitlab 8.2.3+ce.0-0-g8eda093)
{% from 'macrolib.cfg.in' import cfg with context %}
# 1. Rename this file to rack_attack.rb
# 2. Review the paths_to_be_protected and add any other path you need protecting
#
paths_to_be_protected = [
"#{Rails.application.config.relative_url_root}/users/password",
"#{Rails.application.config.relative_url_root}/users/sign_in",
"#{Rails.application.config.relative_url_root}/api/#{API::API.version}/session.json",
"#{Rails.application.config.relative_url_root}/api/#{API::API.version}/session",
"#{Rails.application.config.relative_url_root}/users",
"#{Rails.application.config.relative_url_root}/users/confirmation",
"#{Rails.application.config.relative_url_root}/unsubscribes/"
]
# Create one big regular expression that matches strings starting with any of
# the paths_to_be_protected.
paths_regex = Regexp.union(paths_to_be_protected.map { |path| /\A#{Regexp.escape(path)}/ })
unless Rails.env.test?
Rack::Attack.throttle('protected paths', limit: {{ cfg('rate_limit_requests_per_period') }}, period: {{ cfg('rate_limit_period') }}.seconds) do |req|
if req.post? && req.path =~ paths_regex
req.ip
end
end
end
{{ autogenerated }}
# see:
# https://gitlab.com/gitlab-org/gitlab-ce/blob/master/config/resque.yml.example
# https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-cookbooks/gitlab/templates/default/resque.yml.erb
# (last udpdated for omnibus-gitlab 8.2.3+ce.0-0-g8eda093)
production: unix://{{ redis.unixsocket }}
{{ autogenerated }}
# see:
# https://gitlab.com/gitlab-org/gitlab-ce/blob/master/config/initializers/smtp_settings.rb.sample
# https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-cookbooks/gitlab/templates/default/smtp_settings.rb.erb
# (last updated for omnibus-gitlab 8.2.3+ce.0-0-g8eda093)
{% from 'macrolib.cfg.in' import cfg, cfg_bool with context %}
{% if cfg_bool('smtp_enable') %}
if Rails.env.production?
Gitlab::Application.config.action_mailer.delivery_method = :smtp
ActionMailer::Base.smtp_settings = {
address: "{{ cfg('smtp_address') }}",
port: {{ cfg('smtp_port') }},
user_name: "{{ cfg('smtp_user_name') }}",
password: "{{ cfg('smtp_password') }}",
domain: "{{ cfg('smtp_domain') }}",
authentication: :{{ cfg('smtp_authentication') }},
enable_starttls_auto: {{ cfg('smtp_enable_starttls_auto') }},
openssl_verify_mode: '{{ cfg("smtp_openssl_verify_mode") }}'
# ca_path:
# ca_file:
}
end
{% else %}
# SMTP disabled in instance configuration (see `smtp_enable` parameter).
# Mail sending, if enabled (see `email_enabled`), will be done via sendmail.
{% endif %}
{{ autogenerated }}
# see:
# https://gitlab.com/gitlab-org/gitlab-ce/blob/master/config/unicorn.rb.example
# https://gitlab.com/gitlab-org/gitlab-ce/blob/master/config/unicorn.rb.example.development
# https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-cookbooks/gitlab/templates/default/unicorn.rb.erb
# (last updated for omnibus-gitlab 8.2.3+ce.0-0-g8eda093)
{% from 'macrolib.cfg.in' import cfg with context %}
# What ports/sockets to listen on, and what options for them.
# we listen only on unix socket
listen "{{ unicorn.socket }}", :backlog => {{ cfg('unicorn_backlog_socket') }}
#listen "127.0.0.1:8888", :tcp_nopush => true
working_directory '{{ gitlab_work.location }}'
# What the timeout for killing busy workers is, in seconds
timeout {{ cfg('unicorn_worker_timeout') }}
# Whether the app should be pre-loaded
preload_app true
# How many worker processes
worker_processes {{ cfg('unicorn_worker_processes') }}
# about before_fork / after_fork - see:
# https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-cookbooks/gitlab/definitions/unicorn_service.rb
# http://bogomips.org/unicorn.git/tree/examples/unicorn.conf.rb?id=3312aca8#n75
# What to do before we fork a worker
before_fork do |server, worker|
# XXX why gitlab does not enable this?
# # the following is highly recomended for Rails + "preload_app true"
# # as there's no need for the master process to hold a connection
# defined?(ActiveRecord::Base) and
# ActiveRecord::Base.connection.disconnect!
# This allows a new master process to incrementally
# phase out the old master process with SIGTTOU to avoid a
# thundering herd (especially in the "preload_app false" case)
# when doing a transparent upgrade. The last worker spawned
# will then kill off the old master process with a SIGQUIT.
old_pid = "#{server.config[:pid]}.oldbin"
if old_pid != server.pid
begin
sig = (worker.nr + 1) >= server.worker_processes ? :QUIT : :TTOU
Process.kill(sig, File.read(old_pid).to_i)
rescue Errno::ENOENT, Errno::ESRCH
end
end
end
# What to do after we fork a worker
after_fork do |server, worker|
# per-process listener ports for debugging/admin/migrations
# addr = "127.0.0.1:#{9293 + worker.nr}"
# server.listen(addr, :tries => -1, :delay => 5, :tcp_nopush => true)
# XXX why gitlab does not enable this?
# # the following is *required* for Rails + "preload_app true",
# defined?(ActiveRecord::Base) and
# ActiveRecord::Base.establish_connection
end
# Where to drop a pidfile
pid '{{ directory.run }}/unicorn.pid'
# Where stderr gets logged
stderr_path '{{ unicorn.log }}/unicorn_stderr.log'
# Where stdout gets logged
stdout_path '{{ unicorn.log }}/unicorn_stdout.log'
#!{{ bash.location }}/bin/bash
# run program under SIGKILL watchdog
# watcher-sigkill <prog> [<progargs> ...]
#
# if the program terminates with SIGKILL - it is restarted after grace period.
# if the program terminates otherwise - whole process terminates.
if [ "$#" -lt 1 ]; then
echo "Usage: watcher-sigkill <prog> [<progargs> ...]" 1>&2
exit 1
fi
prog="$@"
progpid=""
killexit="137" # = 128 + 9 (exit code of process terminated by SIGKILL)
# make sure to terminate children, when we exit.
# needed for e.g. when `slapos node stop ...` kills us.
trap 'atexit' EXIT
atexit() {
jobs="$(jobs -p)"
test -n "$jobs" && kill $jobs
}
# run prog under monitoring
while true; do
echo "run $prog"
$prog &
progpid=$!
echo "wait $progpid"
wait $progpid
status=$?
echo "-> $status"
# if program terminated not by SIGKILL - exit
if [ "$status" != "$killexit" ] ; then
echo "exit $status"
exit "$status"
fi
# otherwise sleep a bit and restart
sleep 1
done
...@@ -34,13 +34,17 @@ develop-eggs-directory = {{ develop_eggs_directory }} ...@@ -34,13 +34,17 @@ develop-eggs-directory = {{ develop_eggs_directory }}
offline = true offline = true
[slapconfiguration] [slapconfiguration]
recipe = slapos.cookbook:slapconfiguration recipe = slapos.cookbook:slapconfiguration.serialised
computer = ${slap-connection:computer-id} computer = ${slap-connection:computer-id}
partition = ${slap-connection:partition-id} partition = ${slap-connection:partition-id}
url = ${slap-connection:server-url} url = ${slap-connection:server-url}
key = ${slap-connection:key-file} key = ${slap-connection:key-file}
cert = ${slap-connection:cert-file} cert = ${slap-connection:cert-file}
# ERP5 URL to use in Jupyter by default
# default value is empty - which means no default ERP5 URL
configuration.erp5-url =
[instance-parameter] [instance-parameter]
port = 8888 port = 8888
host = ${slapconfiguration:ipv6-random} host = ${slapconfiguration:ipv6-random}
...@@ -141,6 +145,7 @@ rendered = ${directory:erp5_kernel_dir}/ERP5kernel.py ...@@ -141,6 +145,7 @@ rendered = ${directory:erp5_kernel_dir}/ERP5kernel.py
# Use ipython as executable python as we'll be needing requests library in kernel # Use ipython as executable python as we'll be needing requests library in kernel
context = context =
raw python_executable {{ bin_directory }}/ipython raw python_executable {{ bin_directory }}/ipython
key erp5_url slapconfiguration:configuration.erp5-url
[kernel-json] [kernel-json]
<= dynamic-jinja2-template-base <= dynamic-jinja2-template-base
......
...@@ -43,7 +43,7 @@ md5sum = d7d4a7e19d55bf14007819258bf42100 ...@@ -43,7 +43,7 @@ md5sum = d7d4a7e19d55bf14007819258bf42100
[erp5-kernel] [erp5-kernel]
<= download-file-base <= download-file-base
filename = ERP5kernel.py.jinja filename = ERP5kernel.py.jinja
md5sum = da2f592075c414d4bb26cf7a7dfd147b md5sum = 3dfc6a7c16828bff55dec4cf96b730d3
[kernel-json] [kernel-json]
<= download-file-base <= download-file-base
...@@ -60,7 +60,7 @@ recipe = slapos.recipe.template:jinja2 ...@@ -60,7 +60,7 @@ recipe = slapos.recipe.template:jinja2
template = ${:_profile_base_location_}/instance.cfg.in template = ${:_profile_base_location_}/instance.cfg.in
rendered = ${buildout:directory}/template.cfg rendered = ${buildout:directory}/template.cfg
mode = 0644 mode = 0644
md5sum = 1a993b1f8fa3f001c45075fe95a48332 md5sum = c6b82a386a72ed72301302c3132ffb71
context = context =
key bin_directory buildout:bin-directory key bin_directory buildout:bin-directory
key develop_eggs_directory buildout:develop-eggs-directory key develop_eggs_directory buildout:develop-eggs-directory
......
...@@ -9,9 +9,11 @@ import requests ...@@ -9,9 +9,11 @@ import requests
import json import json
# erp5_url from buildout # erp5_url from buildout
# TODO: Uncomment after adding automated installation of erp5-data-notebook bt5 erp5_url = "{{ erp5_url }}"
# url = "" if not erp5_url:
# url = "%s/erp5/Base_executeJupyter"%url erp5_url = None
else:
erp5_url = "%s/erp5/Base_executeJupyter" % erp5_url
class MagicInfo: class MagicInfo:
""" """
...@@ -69,8 +71,11 @@ class ERP5Kernel(Kernel): ...@@ -69,8 +71,11 @@ class ERP5Kernel(Kernel):
super(ERP5Kernel, self).__init__(*args, **kwargs) super(ERP5Kernel, self).__init__(*args, **kwargs)
self.user = user self.user = user
self.password = password self.password = password
# Use URL provided by buildout during initiation # By default use URL provided by buildout during initiation
# It can later be overridden # It can later be overridden
if url is None:
self.url = erp5_url
else:
self.url = url self.url = url
self.status_code = status_code self.status_code = status_code
self.reference = None self.reference = None
...@@ -167,11 +172,11 @@ class ERP5Kernel(Kernel): ...@@ -167,11 +172,11 @@ class ERP5Kernel(Kernel):
""" """
try: try:
erp5_request = requests.get( erp5_request = requests.post(
self.url, self.url,
verify=False, verify=False,
auth=(self.user, self.password), auth=(self.user, self.password),
params={ data={
'python_expression': code, 'python_expression': code,
'reference': self.reference, 'reference': self.reference,
'title': self.title, 'title': self.title,
......
{ {
"$schema": "http://json-schema.org/draft-04/schema#", "$schema": "http://json-schema.org/draft-04/schema#",
"description": "Parameters to instantiate a NEO cluster. See https://git.erp5.org/gitweb/neoppod.git/blob/HEAD:/neo.conf?js=1 for more information.", "description": "Parameters to instantiate a NEO cluster. See https://lab.nexedi.com/nexedi/neoppod/blob/master/neo.conf for more information.",
"additionalProperties": false, "additionalProperties": false,
"required": ["cluster"], "required": ["cluster"],
"properties": { "properties": {
......
...@@ -27,7 +27,7 @@ parts = ...@@ -27,7 +27,7 @@ parts =
[neoppod-repository] [neoppod-repository]
recipe = slapos.recipe.build:gitclone recipe = slapos.recipe.build:gitclone
repository = http://git.erp5.org/repos/neoppod.git repository = https://lab.nexedi.com/nexedi/neoppod.git
git-executable = ${git:location}/bin/git git-executable = ${git:location}/bin/git
[neoppod-develop] [neoppod-develop]
...@@ -40,7 +40,7 @@ eggs = neoppod[admin, ctl, master, storage-importer, storage-mysqldb] ...@@ -40,7 +40,7 @@ eggs = neoppod[admin, ctl, master, storage-importer, storage-mysqldb]
${mysql-python:egg} ${mysql-python:egg}
ZODB3 ZODB3
ZODB3-patches = ZODB3-patches =
${:_profile_base_location_}/../../component/egg-patch/ZODB3-3.10.5.patch ${:_profile_base_location_}/../../component/egg-patch/ZODB3-3.10.5.patch#c5fe331b1e3a930446f93ab4f6e97c6e
ZODB3-patch-options = -p1 ZODB3-patch-options = -p1
[slapos-deps-eggs] [slapos-deps-eggs]
...@@ -116,7 +116,7 @@ slapos.recipe.template = 2.8 ...@@ -116,7 +116,7 @@ slapos.recipe.template = 2.8
ZODB3 = 3.10.5+SlapOSPatched001 ZODB3 = 3.10.5+SlapOSPatched001
# Required by slapos.toolbox==0.52 # Required by slapos.toolbox==0.52
slapos.toolbox = 0.52 slapos.toolbox = 0.52
apache-libcloud = 0.20.0 apache-libcloud = 0.20.1
atomize = 0.2.0 atomize = 0.2.0
ecdsa = 0.13 ecdsa = 0.13
feedparser = 5.2.1 feedparser = 5.2.1
......
...@@ -9,7 +9,7 @@ extends = common.cfg ...@@ -9,7 +9,7 @@ extends = common.cfg
[versions] [versions]
Flask-Auth = 0.85 Flask-Auth = 0.85
PyRSS2Gen = 1.1 PyRSS2Gen = 1.1
apache-libcloud = 0.19.0 apache-libcloud = 0.20.1
cns.recipe.symlink = 0.2.3 cns.recipe.symlink = 0.2.3
collective.recipe.environment = 0.2.0 collective.recipe.environment = 0.2.0
ecdsa = 0.13 ecdsa = 0.13
......
[buildout] [buildout]
versions = versions versions = versions
extends = extends =
../../software/ipython_notebook/software.cfg
../../component/fluentd/buildout.cfg ../../component/fluentd/buildout.cfg
../../component/matplotlib/buildout.cfg
../../component/ipython/buildout.cfg
../../component/pandas/buildout.cfg
../../component/wendelin.core/buildout.cfg ../../component/wendelin.core/buildout.cfg
../../component/msgpack-python/buildout.cfg ../../component/msgpack-python/buildout.cfg
../../component/scipy/buildout.cfg ../../component/scipy/buildout.cfg
../../component/scikit-learn/buildout.cfg
../../software/erp5/software.cfg ../../software/erp5/software.cfg
parts += parts +=
wendelin wendelin
scipy scipy
scikit-learn
pandas
msgpack-python msgpack-python
ipython ipython
wendelin.core wendelin.core
matplotlib
fluentd fluentd
ipython-notebook ipython-notebook
...@@ -29,13 +21,10 @@ initialization = ...@@ -29,13 +21,10 @@ initialization =
extra-paths += extra-paths +=
${wendelin:location} ${wendelin:location}
eggs += eggs +=
${scikit-learn:egg}
${scipy:egg} ${scipy:egg}
${pandas:egg}
${msgpack-python:egg} ${msgpack-python:egg}
${wendelin.core:egg} ${wendelin.core:egg}
${ipython:egg} ${ipython:egg}
${matplotlib:egg}
[erp5_repository_list] [erp5_repository_list]
repository_id_list += wendelin repository_id_list += wendelin
...@@ -43,7 +32,10 @@ repository_id_list += wendelin ...@@ -43,7 +32,10 @@ repository_id_list += wendelin
[local-bt5-repository] [local-bt5-repository]
# we need to override it # we need to override it
list = ${erp5:location}/bt5 ${erp5:location}/product/ERP5/bootstrap ${wendelin:location}/bt5/ list = ${erp5:location}/bt5 ${erp5:location}/product/ERP5/bootstrap ${wendelin:location}/bt5/
bt5_list = erp5_full_text_myisam_catalog erp5_configurator_standard erp5_configurator_maxma_demo erp5_configurator_ung erp5_configurator_run_my_doc erp5_configurator_ebusiness_lotse erp5_wendelin_configurator
# Jupyter is by default enabled in Wendelin
[erp5-defaults]
jupyter-enable-default = true
[wendelin] [wendelin]
<= erp5 <= erp5
...@@ -58,11 +50,6 @@ revision = 8f58ae080576bd3f70b01892e127b5a0552ad17b ...@@ -58,11 +50,6 @@ revision = 8f58ae080576bd3f70b01892e127b5a0552ad17b
revision = 498ccf943f1dac3dbf549e9d6e5d7bbed111af12 revision = 498ccf943f1dac3dbf549e9d6e5d7bbed111af12
[versions] [versions]
scikit-learn = 0.16.1
scipy = 0.15.1 scipy = 0.15.1
pandas = 0.16.1
msgpack-python = 0.4.6 msgpack-python = 0.4.6
numpy = 1.9.2
wendelin.core = 0.5 wendelin.core = 0.5
ipython = 3.2.0
matplotlib = 1.4.3
...@@ -21,14 +21,17 @@ extends = ...@@ -21,14 +21,17 @@ extends =
../../component/libffi/buildout.cfg ../../component/libffi/buildout.cfg
../../component/libpng/buildout.cfg ../../component/libpng/buildout.cfg
../../component/libreoffice-bin/buildout.cfg ../../component/libreoffice-bin/buildout.cfg
../../component/matplotlib/buildout.cfg
../../component/mesa/buildout.cfg ../../component/mesa/buildout.cfg
../../component/numpy/buildout.cfg ../../component/numpy/buildout.cfg
../../component/pandas/buildout.cfg
../../component/percona-toolkit/buildout.cfg ../../component/percona-toolkit/buildout.cfg
../../component/patch/buildout.cfg ../../component/patch/buildout.cfg
../../component/pillow/buildout.cfg ../../component/pillow/buildout.cfg
../../component/pysvn-python/buildout.cfg ../../component/pysvn-python/buildout.cfg
../../component/python-ldap-python/buildout.cfg ../../component/python-ldap-python/buildout.cfg
../../component/rdiff-backup/buildout.cfg ../../component/rdiff-backup/buildout.cfg
../../component/scikit-learn/buildout.cfg
../../component/stunnel/buildout.cfg ../../component/stunnel/buildout.cfg
../../component/subversion/buildout.cfg ../../component/subversion/buildout.cfg
../../component/tesseract/buildout.cfg ../../component/tesseract/buildout.cfg
...@@ -49,6 +52,7 @@ extends = ...@@ -49,6 +52,7 @@ extends =
../../component/findutils/buildout.cfg ../../component/findutils/buildout.cfg
../../component/userhosts/buildout.cfg ../../component/userhosts/buildout.cfg
../../component/postfix/buildout.cfg ../../component/postfix/buildout.cfg
../../software/ipython_notebook/software.cfg
../../software/neoppod/software-common.cfg ../../software/neoppod/software-common.cfg
# keep neoppod extends last # keep neoppod extends last
...@@ -123,6 +127,15 @@ parts += ...@@ -123,6 +127,15 @@ parts +=
# Create instance template # Create instance template
template template
# jupyter
ipython-notebook
instance-jupyter
monitor-eggs
# override instance-jupyter not to render into default template.cfg
[instance-jupyter]
rendered = ${buildout:directory}/template-jupyter.cfg
[download-base] [download-base]
<= download-base-neo <= download-base-neo
url = ${:_profile_base_location_}/${:filename} url = ${:_profile_base_location_}/${:filename}
...@@ -220,7 +233,7 @@ recipe = slapos.recipe.template:jinja2 ...@@ -220,7 +233,7 @@ recipe = slapos.recipe.template:jinja2
# XXX: "template.cfg" is hardcoded in instanciation recipe # XXX: "template.cfg" is hardcoded in instanciation recipe
rendered = ${buildout:directory}/template.cfg rendered = ${buildout:directory}/template.cfg
template = ${:_profile_base_location_}/instance.cfg.in template = ${:_profile_base_location_}/instance.cfg.in
md5sum = 540956c635acc9707045510c11f80016 md5sum = 98a4edfb18cfd810ea570f56d502a2cc
mode = 640 mode = 640
context = context =
key mariadb_link_binary template-mariadb:link-binary key mariadb_link_binary template-mariadb:link-binary
...@@ -250,6 +263,7 @@ context = ...@@ -250,6 +263,7 @@ context =
key haproxy_location haproxy:location key haproxy_location haproxy:location
key instance_common_cfg instance-common:rendered key instance_common_cfg instance-common:rendered
key jsl_location jsl:location key jsl_location jsl:location
key jupyter_enable_default erp5-defaults:jupyter-enable-default
key kumo_location kumo:location key kumo_location kumo:location
key libICE_location libICE:location key libICE_location libICE:location
key libSM_location libSM:location key libSM_location libSM:location
...@@ -283,6 +297,7 @@ context = ...@@ -283,6 +297,7 @@ context =
key template_create_erp5_site_real template-create-erp5-site-real:target key template_create_erp5_site_real template-create-erp5-site-real:target
key template_erp5 template-erp5:target key template_erp5 template-erp5:target
key template_haproxy_cfg template-haproxy-cfg:target key template_haproxy_cfg template-haproxy-cfg:target
key template_jupyter_cfg instance-jupyter:rendered
key template_kumofs template-kumofs:target key template_kumofs template-kumofs:target
key template_mariadb template-mariadb:target key template_mariadb template-mariadb:target
key template_mariadb_initial_setup template-mariadb-initial-setup:target key template_mariadb_initial_setup template-mariadb-initial-setup:target
...@@ -314,7 +329,7 @@ rendered = ${monitor-template-dummy:target} ...@@ -314,7 +329,7 @@ rendered = ${monitor-template-dummy:target}
[template-erp5] [template-erp5]
<= download-base <= download-base
filename = instance-erp5.cfg.in filename = instance-erp5.cfg.in
md5sum = 977119d0b876df827c97bb64e6e98273 md5sum = 66edf64eeaecded8977459acb26f4424
[template-zeo] [template-zeo]
<= download-base <= download-base
...@@ -384,6 +399,11 @@ update-command = ${:command} ...@@ -384,6 +399,11 @@ update-command = ${:command}
[erp5_repository_list] [erp5_repository_list]
repository_id_list = erp5 repository_id_list = erp5
# ERP5 defaults, which can be overridden in inheriting recipes (e.g. wendelin)
[erp5-defaults]
# Jupyter is by default disabled in ERP5
jupyter-enable-default = false
[erp5] [erp5]
recipe = slapos.recipe.build:gitclone recipe = slapos.recipe.build:gitclone
repository = http://git.erp5.org/repos/erp5.git repository = http://git.erp5.org/repos/erp5.git
...@@ -451,12 +471,15 @@ initialization = ...@@ -451,12 +471,15 @@ initialization =
<= neoppod <= neoppod
eggs = eggs =
${numpy:egg} ${numpy:egg}
${matplotlib:egg}
${mysql-python:egg} ${mysql-python:egg}
${lxml-python:egg} ${lxml-python:egg}
${pandas:egg}
${pillow-python:egg} ${pillow-python:egg}
${python-ldap-python:egg} ${python-ldap-python:egg}
${pysvn-python:egg} ${pysvn-python:egg}
${pycrypto-python:egg} ${pycrypto-python:egg}
${scikit-learn:egg}
lock_file lock_file
PyStemmer PyStemmer
PyXML PyXML
...@@ -465,7 +488,6 @@ eggs = ...@@ -465,7 +488,6 @@ eggs =
chardet chardet
collective.recipe.template collective.recipe.template
coverage coverage
elementtree
erp5diff erp5diff
inotifyx inotifyx
interval interval
...@@ -489,7 +511,6 @@ eggs = ...@@ -489,7 +511,6 @@ eggs =
xml_marshaller xml_marshaller
xupdate_processor xupdate_processor
feedparser feedparser
argparse
validictory validictory
erp5.util erp5.util
huBarcode huBarcode
...@@ -563,10 +584,12 @@ extra-paths = ...@@ -563,10 +584,12 @@ extra-paths =
# patches for eggs # patches for eggs
patch-binary = ${patch:location}/bin/patch patch-binary = ${patch:location}/bin/patch
Acquisition-patches = ${:_profile_base_location_}/../../component/egg-patch/Acquisition/aq_dynamic.patch Acquisition-patches = ${:_profile_base_location_}/../../component/egg-patch/Acquisition/aq_dynamic.patch#e8029103350dad364d25747514a20327
Acquisition-patch-options = -p1 Acquisition-patch-options = -p1
Products.DCWorkflow-patches = ${:_profile_base_location_}/../../component/egg-patch/Products.DCWorkflow/workflow_method.patch Products.DCWorkflow-patches = ${:_profile_base_location_}/../../component/egg-patch/Products.DCWorkflow/workflow_method.patch#975b49e96bae33ac8563454fe5fa9899
Products.DCWorkflow-patch-options = -p1 Products.DCWorkflow-patch-options = -p1
python-magic-patches = ${:_profile_base_location_}/../../component/egg-patch/python_magic/magic.patch#de0839bffac17801e39b60873a6c2068
python-magic-patch-options = -p1
[zodbanalyze] [zodbanalyze]
recipe = zc.recipe.egg recipe = zc.recipe.egg
...@@ -602,6 +625,7 @@ Acquisition = 2.13.8+SlapOSPatched001 ...@@ -602,6 +625,7 @@ Acquisition = 2.13.8+SlapOSPatched001
Products.DCWorkflow = 2.2.4+SlapOSPatched001 Products.DCWorkflow = 2.2.4+SlapOSPatched001
pysvn = 1.7.10+SlapOSPatched002 pysvn = 1.7.10+SlapOSPatched002
python-ldap = 2.4.22+SlapOSPatched001 python-ldap = 2.4.22+SlapOSPatched001
python-magic = 0.4.10+SlapOSPatched001
# specify dev version to be sure that an old released version is not used # specify dev version to be sure that an old released version is not used
cloudooo = 1.2.5-dev cloudooo = 1.2.5-dev
...@@ -660,9 +684,8 @@ WSGIUtils = 0.7 ...@@ -660,9 +684,8 @@ WSGIUtils = 0.7
astroid = 1.3.8 astroid = 1.3.8
chardet = 2.3.0 chardet = 2.3.0
csp-eventlet = 0.7.0 csp-eventlet = 0.7.0
elementtree = 1.2.6.post20050316
erp5diff = 0.8.1.7 erp5diff = 0.8.1.7
eventlet = 0.17.4 eventlet = 0.18.1
five.formlib = 1.0.4 five.formlib = 1.0.4
five.localsitemanager = 2.0.5 five.localsitemanager = 2.0.5
greenlet = 0.4.9 greenlet = 0.4.9
...@@ -673,8 +696,10 @@ interval = 1.0.0 ...@@ -673,8 +696,10 @@ interval = 1.0.0
ipdb = 0.8.1 ipdb = 0.8.1
ipython = 4.0.0 ipython = 4.0.0
logilab-common = 1.1.0 logilab-common = 1.1.0
matplotlib = 1.4.3
numpy = 1.10.4 numpy = 1.10.4
objgraph = 2.0.1 objgraph = 2.0.1
pandas = 0.16.1
ply = 3.8 ply = 3.8
polib = 1.0.7 polib = 1.0.7
pprofile = 1.7.3 pprofile = 1.7.3
...@@ -683,12 +708,12 @@ pycountry = 1.19 ...@@ -683,12 +708,12 @@ pycountry = 1.19
pyflakes = 1.0.0 pyflakes = 1.0.0
# pylint 1.5.1 breaks testDynamicClassGeneration # pylint 1.5.1 breaks testDynamicClassGeneration
pylint = 1.4.4 pylint = 1.4.4
python-magic = 0.4.10
python-memcached = 1.57 python-memcached = 1.57
pytracemalloc = 1.2 pytracemalloc = 1.2
qrcode = 5.1 qrcode = 5.2.2
restkit = 4.2.2 restkit = 4.2.2
rtjp-eventlet = 0.3.2 rtjp-eventlet = 0.3.2
scikit-learn = 0.16.1
simplegeneric = 0.8.1 simplegeneric = 0.8.1
socketpool = 0.5.3 socketpool = 0.5.3
spyne = 2.12.11 spyne = 2.12.11
...@@ -705,6 +730,10 @@ xupdate-processor = 0.4 ...@@ -705,6 +730,10 @@ xupdate-processor = 0.4
# Products.CMFCore==2.2.9 # Products.CMFCore==2.2.9
Products.ZSQLMethods = 2.13.4 Products.ZSQLMethods = 2.13.4
# Required by:
# qrcode==5.2.2
colorama = 0.3.6
# Required by: # Required by:
# SOAPpy===0.12.0nxd001 # SOAPpy===0.12.0nxd001
fpconst = 0.7.2 fpconst = 0.7.2
......
...@@ -5,6 +5,9 @@ ...@@ -5,6 +5,9 @@
{% set inituser_login = slapparameter_dict.get('inituser-login', 'zope') -%} {% set inituser_login = slapparameter_dict.get('inituser-login', 'zope') -%}
{% set publish_dict = {'site-id': site_id, 'inituser-login': inituser_login} -%} {% set publish_dict = {'site-id': site_id, 'inituser-login': inituser_login} -%}
{% set has_posftix = slapparameter_dict.get('smtp', {}).get('postmaster') -%} {% set has_posftix = slapparameter_dict.get('smtp', {}).get('postmaster') -%}
{% set jupyter_dict = slapparameter_dict.get('jupyter', {}) -%}
{% set has_jupyter = jupyter_dict.get('enable', jupyter_enable_default).lower() in ('true', 'yes') -%}
{% set jupyter_zope_family = jupyter_dict.get('zope-family', '') -%}
[request-common] [request-common]
<= request-common-base <= request-common-base
config-use-ipv6 = {{ dumps(slapparameter_dict.get('use-ipv6', False)) }} config-use-ipv6 = {{ dumps(slapparameter_dict.get('use-ipv6', False)) }}
...@@ -119,7 +122,11 @@ name = neo-${gen-neo-cluster-base:passwd} ...@@ -119,7 +122,11 @@ name = neo-${gen-neo-cluster-base:passwd}
return = return =
zope-address-list zope-address-list
hosts-dict hosts-dict
config-bt5 = {{ dumps(slapparameter_dict.get('bt5', 'erp5_full_text_myisam_catalog erp5_configurator_standard erp5_configurator_maxma_demo erp5_configurator_ung erp5_configurator_run_my_doc')) }} {% set bt5_default_list = 'erp5_full_text_myisam_catalog erp5_configurator_standard erp5_configurator_maxma_demo erp5_configurator_ung erp5_configurator_run_my_doc' -%}
{% if has_jupyter -%}
{% set bt5_default_list = bt5_default_list + ' erp5_data_notebook' -%}
{% endif -%}
config-bt5 = {{ dumps(slapparameter_dict.get('bt5', bt5_default_list)) }}
config-bt5-repository-url = {{ dumps(slapparameter_dict.get('bt5-repository-url', local_bt5_repository)) }} config-bt5-repository-url = {{ dumps(slapparameter_dict.get('bt5-repository-url', local_bt5_repository)) }}
config-cloudooo-url = ${request-cloudooo:connection-url} config-cloudooo-url = ${request-cloudooo:connection-url}
config-deadlock-debugger-password = ${publish-early:deadlock-debugger-password} config-deadlock-debugger-password = ${publish-early:deadlock-debugger-password}
...@@ -150,10 +157,17 @@ config-tidstorage-port = ${request-zodb:connection-tidstorage-port} ...@@ -150,10 +157,17 @@ config-tidstorage-port = ${request-zodb:connection-tidstorage-port}
software-type = zope software-type = zope
{% set zope_family_dict = {} -%} {% set zope_family_dict = {} -%}
{% set jupyter_zope_family_default = [] -%}
{% for custom_name, zope_parameter_dict in slapparameter_dict.get('zope-partition-dict', {'1': {}}).items() -%} {% for custom_name, zope_parameter_dict in slapparameter_dict.get('zope-partition-dict', {'1': {}}).items() -%}
{% set partition_name = 'zope-' ~ custom_name -%} {% set partition_name = 'zope-' ~ custom_name -%}
{% set section_name = 'request-' ~ partition_name -%} {% set section_name = 'request-' ~ partition_name -%}
{% do zope_family_dict.setdefault(zope_parameter_dict.get('family', 'default'), []).append(section_name) -%} {% set zope_family = zope_parameter_dict.get('family', 'default') -%}
{# # default jupyter zope family is first zope family. -#}
{# # use list.append() to update it, because in jinja2 set changes only local scope. -#}
{% if not jupyter_zope_family_default -%}
{% do jupyter_zope_family_default.append(zope_family) -%}
{% endif -%}
{% do zope_family_dict.setdefault(zope_family, []).append(section_name) -%}
[{{ section_name }}] [{{ section_name }}]
<= request-zope-base <= request-zope-base
name = {{ partition_name }} name = {{ partition_name }}
...@@ -168,6 +182,12 @@ config-port-base = {{ dumps(zope_parameter_dict.get('port-base', 2200)) }} ...@@ -168,6 +182,12 @@ config-port-base = {{ dumps(zope_parameter_dict.get('port-base', 2200)) }}
config-webdav = {{ dumps(zope_parameter_dict.get('webdav', False)) }} config-webdav = {{ dumps(zope_parameter_dict.get('webdav', False)) }}
{% endfor -%} {% endfor -%}
{# if not explicitly configured, connect jupyter to first zope family, which -#}
{# will be 'default' if zope families are not configured also -#}
{% if not jupyter_zope_family and jupyter_zope_family_default -%}
{% set jupyter_zope_family = jupyter_zope_family_default[0] -%}
{% endif -%}
{# We need to concatenate lists that we cannot read as lists, so this gets hairy. -#} {# We need to concatenate lists that we cannot read as lists, so this gets hairy. -#}
{% set zope_address_list_id_dict = {} -%} {% set zope_address_list_id_dict = {} -%}
{% set zope_family_parameter_dict = {} -%} {% set zope_family_parameter_dict = {} -%}
...@@ -190,6 +210,20 @@ config-url = ${request-balancer:connection-{{ family_name }}-v6} ...@@ -190,6 +210,20 @@ config-url = ${request-balancer:connection-{{ family_name }}-v6}
{% endif -%} {% endif -%}
{% endfor -%} {% endfor -%}
{% if has_jupyter -%}
{# request jupyter connected to balancer of proper zope family -#}
{{ request('jupyter', 'jupyter', 'jupyter', {}, key_config={'erp5-url': 'request-balancer:connection-' ~ jupyter_zope_family}) }}
{% if has_frontend -%}
[frontend-jupyter]
<= request-frontend-base
name = frontend-jupyter
config-url = ${request-jupyter:connection-url}
{# # override jupyter-url in publish_dict with frontend address -#}
{% do publish_dict.__setitem__('jupyter-url', '${frontend-jupyter:connection-site_url}') -%}
{% endif -%}
{%- endif %}
{% set balancer_dict = slapparameter_dict.get('balancer', {}) -%} {% set balancer_dict = slapparameter_dict.get('balancer', {}) -%}
[request-balancer] [request-balancer]
<= request-common <= request-common
......
...@@ -64,6 +64,7 @@ extra-context = ...@@ -64,6 +64,7 @@ extra-context =
import urllib urllib import urllib urllib
[dynamic-template-erp5-parameters] [dynamic-template-erp5-parameters]
jupyter-enable-default = {{ jupyter_enable_default }}
local-bt5-repository = {{ local_bt5_repository }} local-bt5-repository = {{ local_bt5_repository }}
[dynamic-template-erp5] [dynamic-template-erp5]
...@@ -71,6 +72,7 @@ local-bt5-repository = {{ local_bt5_repository }} ...@@ -71,6 +72,7 @@ local-bt5-repository = {{ local_bt5_repository }}
template = {{ template_erp5 }} template = {{ template_erp5 }}
filename = instance-erp5.cfg filename = instance-erp5.cfg
extra-context = extra-context =
key jupyter_enable_default dynamic-template-erp5-parameters:jupyter-enable-default
key local_bt5_repository dynamic-template-erp5-parameters:local-bt5-repository key local_bt5_repository dynamic-template-erp5-parameters:local-bt5-repository
import urlparse urlparse import urlparse urlparse
import-list = import-list =
...@@ -177,6 +179,11 @@ filename = instance-create-erp5-site.cfg ...@@ -177,6 +179,11 @@ filename = instance-create-erp5-site.cfg
extra-context = extra-context =
section parameter_dict dynamic-template-create-erp5-site-parameters section parameter_dict dynamic-template-create-erp5-site-parameters
# we need this value to be present in a section,
# for slapos.cookbook:switch-softwaretype to work
[dynamic-template-jupyter]
rendered = {{ template_jupyter_cfg }}
[switch-softwaretype] [switch-softwaretype]
recipe = slapos.cookbook:switch-softwaretype recipe = slapos.cookbook:switch-softwaretype
override = {{ dumps(override_switch_softwaretype |default) }} override = {{ dumps(override_switch_softwaretype |default) }}
...@@ -195,3 +202,4 @@ postfix = dynamic-template-postfix:rendered ...@@ -195,3 +202,4 @@ postfix = dynamic-template-postfix:rendered
zodb-zeo = dynamic-template-zeo:rendered zodb-zeo = dynamic-template-zeo:rendered
zodb-neo = neo-storage-mysql:rendered zodb-neo = neo-storage-mysql:rendered
zope = dynamic-template-zope:rendered zope = dynamic-template-zope:rendered
jupyter = dynamic-template-jupyter:rendered
...@@ -111,11 +111,11 @@ Jinja2 = 2.8 ...@@ -111,11 +111,11 @@ Jinja2 = 2.8
PyYAML = 3.11 PyYAML = 3.11
Werkzeug = 0.11.3 Werkzeug = 0.11.3
buildout-versions = 1.7 buildout-versions = 1.7
cffi = 1.4.2 cffi = 1.5.0
cliff = 1.15.0 cliff = 1.15.0
cmd2 = 0.6.8 cmd2 = 0.6.8
collective.recipe.template = 1.13 collective.recipe.template = 1.13
cryptography = 1.2.1 cryptography = 1.2.2
decorator = 4.0.6 decorator = 4.0.6
idna = 2.0 idna = 2.0
inotifyx = 0.2.2 inotifyx = 0.2.2
...@@ -126,7 +126,7 @@ netaddr = 0.7.18 ...@@ -126,7 +126,7 @@ netaddr = 0.7.18
pbr = 1.8.1 pbr = 1.8.1
plone.recipe.command = 1.1 plone.recipe.command = 1.1
prettytable = 0.7.2 prettytable = 0.7.2
psutil = 3.3.0 psutil = 3.4.2
pyOpenSSL = 0.15.1 pyOpenSSL = 0.15.1
pyasn1 = 0.1.9 pyasn1 = 0.1.9
pyparsing = 2.0.7 pyparsing = 2.0.7
...@@ -183,7 +183,7 @@ lock-file = 2.0 ...@@ -183,7 +183,7 @@ lock-file = 2.0
netifaces = 0.10.4 netifaces = 0.10.4
# Required by: # Required by:
# cffi==1.4.2 # cffi==1.5.0
pycparser = 2.14 pycparser = 2.14
# Required by: # Required by:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment