re6st: merge the grdn-cfg and grdn-run in a single script grandenet.

net-misc/re6stnet/files/grdn-run → net-misc/re6stnet/files/grandenet

@@ -4,10 +4,72 @@
 mountpoint="/media/removable"
 configdir="/home/chronos/user/.re6stconf"
 configfile="${configdir}/re6stnet.conf"
-# shill should not care about these devices
+# shill should not care about these interfaces
 blacklist_option="re6stnet-tcp,re6stnet10,re6stnet9,re6stnet8,re6stnet7,re6stnet6,re6stnet5,re6stnet4,re6stnet3,re6stnet2,re6stnet1,tun0,tun1,tun2"
 
-echo "After having run this script, you will connect to the Grandenet network, based on re6st, a resilient overlay mesh network providing IPv6."
+
+function configure {
+    configoptions=()
+    
+    echo "You are going to generate all the files needed to be able to join the Grandenet network, based on re6st: a resilient overlay mesh network providing IPv6 over IPv4."
+    read -p "token (you can get one on http://www.grandenet.cn): " token
+    if [ "${token}" == "" ] ; then
+        echo "No token given. Exiting."
+        exit 1
+    fi
+    
+    read -p "registry [http://re6stnet.grandenet.cn]: " registry
+    if [ "${registry}" == "" ] ; then
+        registry="http://re6stnet.grandenet.cn"
+    fi
+    
+    read -p "set re6st route as default [Y/n]? " default
+    if [ "${default}" != "n" -a "${default}" != "N" ] ; then
+        configoptions+=('default')
+    fi
+    
+    re6st-conf --registry "${registry}" --token "${token}" --dir "${configdir}"
+    
+    printf '%s\n' "${configoptions[@]}" >> "${configfile}"
+    
+    echo "
+:FORWARD ACCEPT [0:0]
+:OUTPUT DROP [0:0]
+-A INPUT -p udp -m udp --dport 6696 -j ACCEPT
+-A INPUT -p udp -m udp --dport 326 -j ACCEPT
+-A INPUT -p tcp -m tcp --dport 9684 -j ACCEPT
+-A INPUT -p tcp -m tcp --dport 50005 -j ACCEPT
+-A OUTPUT -p udp -m udp --dport 6696 -j ACCEPT
+-A OUTPUT -p udp -m udp --dport 326 -j ACCEPT
+" > "${configdir}/ip6tables.conf"
+    
+    read -p "save configuration on an external device [Y/n]? " save
+    if [ "$save" != "n" -a "$save" != "N" ] ; then
+        save=1
+        if [[ $(ls -d "${mountpoint}"/*) ]]; then
+            echo "Detected external partitions:"
+            for mnt in "${mountpoint}"/* ; do
+                echo "    * $mnt"
+            done
+        else
+            echo "no external device partition mounted on ${mountpoint}"
+        fi
+        read -e -p "Where the configuration directory should be saved (use tabulation for autocompletion): " place
+        place+="/re6stconf"
+        echo "configuration will be saved in $place"
+
+        install -d "${place}"
+        for file in "${configdir}"/* ; do
+            install "${file}" "${place}"
+        done
+    else
+        echo "Configuration will be placed in ${configfile}, please do a manual backup later or you could lose your access to this network."
+    fi
+    
+}
+
+
+echo "After answering a few questions, you will connect to the Grandenet network, based on re6st, a resilient overlay mesh network providing IPv6."
 if [[ $(pgrep re6stnet) ]] ; then
     read -p "re6stnet is already running. Stop it [y/N] ?" stop
     if [ "$stop" == "y" -o "$stop" == "Y" ] ; then
@@ -19,51 +81,67 @@ if [[ $(pgrep re6stnet) ]] ; then
     fi
 fi
 
-# get configuration
+# there may be a configuration already installed
+usefound="n"
+path=""
 if [ -r "${configfile}" -a -r "${configdir}/cert.crt" -a -r "${configdir}/cert.key" -a -r "${configdir}/ca.crt" ]; then
-    echo "configuration was found in ${configdir}"
-else
-    echo "no configuration was found in ${configdir}, looking for it elsewhere..."
-    path=""
-    if [[ $(find "${mountpoint}" -type d | grep re6stconf) ]] ; then
-        tempath=$(find "${mountpoint}" -type d | grep -m 1 re6stconf)
-        read -p "Use configuration directory found at: ${tempath} [Y/n]? " confirm
-        if [ "${confirm}" == "y" -o "${confirm}" == "Y" -o "${confirm}" == "" ] ; then
-            path=$tempath
+    read -p "Configuration was found in '${configdir}'. Use it: [Y/n]? (answering n will delete the previous config) " usefound
+    if [ "$usefound" != "n" -a "$usefound" != "N" ]; then
+        path=${configdir}
+    else
+        rm -R "${configdir}"
     fi
+fi
+
+# try to find a saved configuration
+if [ ! -r "${configfile}" ] ; then
+    echo "Looking for configuration directory on external devices..."
+    if [[ $(find "${mountpoint}" -type d | grep re6stconf) ]] ; then
+        path=$(find "${mountpoint}" -type d | grep -m 1 re6stconf)
+        read -p "Use configuration directory found at: ${path} [Y/n]? " usefound
     else
-        echo "no configuration directory was found"
+        echo "No configuration directory was found."
     fi
+fi
 
+install -d "${configdir}"
+
+# don't use possibly found configuration(s)
+if [ "$usefound" == "n" -o "$usefound" == "N" ]; then
+    read -p "Manually give the path (p) or generate new (n) configuration [p/N]? " action
+    if [ "${action}" == "P" -o "${action}" == "p" ] ; then
+        read -e -p "Please give a path to the directory containing the re6stnet configuration if you already generated one: " path
         if [ "$path" == "" ] ; then
-         read -e -p "please give a path to the directory containing the re6stnet configuration if you already generated one: " path
-        if [ "$path" == "" ] ; then
-            echo "No configuration given, you can generate one using grdn-cfg command. Exiting."
+            echo "No configuration path given. Exiting."
             exit 1
         fi
+    else
+        configure || ( echo "Problem occured while generating new configuration. Exiting." && exit 1 )
+        path=${configdir}
     fi
-    if [ ! -d "$path" ] ; then
-        echo "Invalid path ${path}, you can generate a valid configuration using grdn-cfg command. Exiting."
+fi
+
+# copy the config if needed got by previous steps
+if [ ${path}=${configdir} ]; then
+    echo "Using configuration in place."
+elif [ ! -d "$path" ] ; then
+    echo "Invalid path '${path}'. Exiting."
     exit 1
-    fi
-    if [ -r "${path}/re6stnet.conf" -a -r "${path}/cert.crt" -a -r "${path}/cert.key" -a -r "${path}/ca.crt" ]; then
-        install -d "${configdir}"
+elif [ -r "${path}/re6stnet.conf" -a -r "${path}/cert.crt" -a -r "${path}/cert.key" -a -r "${path}/ca.crt" ]; then
+    echo "Copying config to '${configdir}'."
     for file in "${path}"/* ; do
         install -m 600 "${file}" "${configdir}"
     done
-    else
-        echo "Missing some configuration files in ${path}, you can generate a valid configuration using grdn-cfg command. Exiting."
+else
+    echo "Missing some configuration files in '${path}'. Exiting."
     exit 1
-    fi
 fi
 
-# setup
-
-# saving firewall configuration
+# saving current firewall configuration
 ip6tables-save > "${configdir}/ip6tables.save"
 cp "${configdir}/ip6tables.save" "${configdir}/current_ip6tables.conf"
 
-# clean before exiting
+# function to clean up and exit
 cleanup() {
   printf "\nCleaning up and exiting...\n"
   if [ -r "${configdir}/ip6tables.save" ] ; then

net-misc/re6stnet/files/grdn-cfg

-#!/bin/bash
-# interactively generate configuration for re6st on NayuOS
-
-mountpoint="/media/removable"
-configdir="/home/chronos/user/.re6stconf"
-configfile="${configdir}/re6stnet.conf"
-options=()
-
-install -d "${configdir}"
-
-echo "After having run this script, you will be able to join the Grandenet network, based on re6st, a resilient overlay mesh network providing IPv6."
-read -p "token (you can get one on http://www.grandenet.cn): " token
-
-read -p "registry [http://re6stnet.grandenet.cn]: " registry
-if [ "${registry}" == "" ] ; then
-    registry="http://re6stnet.grandenet.cn"
-fi
-
-read -p "set re6st route as default [Y/n]? " default
-if [ "${default}" == "y" -o "${default}" == "Y" -o "${default}" == "" ] ; then
-    options+=('default')
-fi
-
-read -p "save configuration on an external device [Y/n]? " save
-if [ "$save" == "y" -o "$save" == "Y" -o "$save" == "" ] ; then
-    save=1
-    if [[ $(ls -d "${mountpoint}"/*) ]]; then
-        echo "Detected external partitions:"
-        for mnt in /media/removable/* ; do
-            echo "    * $mnt"
-        done
-    else
-        echo "no external device partition mounted on /media/removable"
-    fi
-    read -e -p "Where the configuration directory should be saved (use tabulation for autocompletion): " place
-    place+="/re6stconf"
-    echo "configuration will be saved in $place"
-else
-    save=0
-    echo "Configuration will be placed in ${configfile}, please do manually backup later or you could lose your access."
-fi
-
-re6st-conf --registry "${registry}" --token "${token}" --dir "${configdir}"
-
-printf '%s\n' "${options[@]}" >> "${configfile}"
-
-echo "
-:FORWARD ACCEPT [0:0]
-:OUTPUT DROP [0:0]
--A INPUT -p udp -m udp --dport 6696 -j ACCEPT
--A INPUT -p udp -m udp --dport 326 -j ACCEPT
--A INPUT -p tcp -m tcp --dport 9684 -j ACCEPT
--A INPUT -p tcp -m tcp --dport 50005 -j ACCEPT
--A OUTPUT -p udp -m udp --dport 6696 -j ACCEPT
--A OUTPUT -p udp -m udp --dport 326 -j ACCEPT
-" > "${configdir}/ip6tables.conf"
-
-if [ $save -a $place ] ; then
-    sudo install -d "${place}"
-    for file in "${configdir}"/* ; do
-        install "${file}" "${place}"
-    done
-fi
-
-echo "Use grdn-run command to run re6st."

net-misc/re6stnet/re6stnet-3.9.1_p1.ebuild

@@ -42,6 +42,6 @@ python_compile() {
 }
 
 python_install() {
-    dobin "${FILESDIR}"/grdn-cfg "${FILESDIR}"/grdn-run
+    dobin "${FILESDIR}"/grandenet
     distutils-r1_python_install
 }