Commit 2fdc0283 authored by Jim Fulton's avatar Jim Fulton

initial ssl implementation (more tests coming)

parent e22f0af6
...@@ -124,10 +124,13 @@ it will continue to poll for a read-write connection. ...@@ -124,10 +124,13 @@ it will continue to poll for a read-write connection.
If a single address resolves to multiple IPv4 or IPv6 addresses, If a single address resolves to multiple IPv4 or IPv6 addresses,
the client will connect to an arbitrary of these addresses. the client will connect to an arbitrary of these addresses.
Authentication SSL
-------------- ---
ZEO supports the use of SSL connections between servers and clients,
including certificate authentication.
ZEO supports SSL certificate authentication.
Installing software Installing software
=================== ===================
...@@ -288,8 +291,8 @@ transaction-timeout ...@@ -288,8 +291,8 @@ transaction-timeout
This defaults to 30 seconds. This defaults to 30 seconds.
SSL configuration Server SSL configuration
~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~
A server can optionally support SSL. Do do so, include a `ssl` A server can optionally support SSL. Do do so, include a `ssl`
subsection of the ZEO section, as in:: subsection of the ZEO section, as in::
...@@ -321,6 +324,10 @@ certificate ...@@ -321,6 +324,10 @@ certificate
key key
The path to the SSL key file for the server certificate. The path to the SSL key file for the server certificate.
password-function
A dotted name if an importable function that, when imported, returns
the password needed to unlock the key (if the key requires a password.)
authenticate authenticate
The path to a file or directory containing client certificates The path to a file or directory containing client certificates
to authenticate. ((See the ``cafile`` and ``capath`` to authenticate. ((See the ``cafile`` and ``capath``
...@@ -328,9 +335,11 @@ authenticate ...@@ -328,9 +335,11 @@ authenticate
``ssl.SSLContext.load_verify_locations``.) ``ssl.SSLContext.load_verify_locations``.)
If this setting is used. then certificate authentication is If this setting is used. then certificate authentication is
used to authenticate clients. A client must be configuted used to authenticate clients. A client must be configured
with one of the certificates supplied using this setting. with one of the certificates supplied using this setting.
This option assumes that you're using self-signed certificates.
Running the ZEO server as a daemon Running the ZEO server as a daemon
---------------------------------- ----------------------------------
...@@ -602,26 +611,26 @@ disconnect_poll ...@@ -602,26 +611,26 @@ disconnect_poll
The delay in seconds between attempts to connect to the The delay in seconds between attempts to connect to the
server, in seconds. Defaults to 1 second. server, in seconds. Defaults to 1 second.
SSL configuration Client SSL configuration
~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~
An ``ssl`` subsection can be used to enable and configure SSL, as in:: An ``ssl`` subsection can be used to enable and configure SSL, as in::
%import ZEO %import ZEO
<clientstorage> <clientstorage>
server 8200 server zeo.example.com8200
<ssl> <ssl>
</ssl> </ssl>
</clientstorage> </clientstorage>
In the example above, SSL is enabled in it's simplest form: In the example above, SSL is enabled in it's simplest form:
- No authentication certificate is supplied - The cient expects the server to have a signed certificate, which the
client validates.
- The server isn't authenticated against certificates.
- The server's host name isn't checked. - The server server host name ``zeo.example.com`` is checked against
the server's certificate.
A number of settings can be provided to configure SSL: A number of settings can be provided to configure SSL:
...@@ -632,6 +641,10 @@ certificate ...@@ -632,6 +641,10 @@ certificate
key key
The path to the SSL key file for the client certificate. The path to the SSL key file for the client certificate.
password-function
A dotted name if an importable function that, when imported, returns
the password needed to unlock the key (if the key requires a password.)
authenticate authenticate
The path to a file or directory containing server certificates The path to a file or directory containing server certificates
to authenticate. ((See the ``cafile`` and ``capath`` to authenticate. ((See the ``cafile`` and ``capath``
...@@ -639,22 +652,18 @@ authenticate ...@@ -639,22 +652,18 @@ authenticate
``ssl.SSLContext.load_verify_locations``.) ``ssl.SSLContext.load_verify_locations``.)
If this setting is used. then certificate authentication is If this setting is used. then certificate authentication is
used to authenticate server. The server must be configuted used to authenticate the server. The server must be configuted
with one of the certificates supplied using this setting. with one of the certificates supplied using this setting.
If this setting has the value ``SIGNED`` or ``-``, then
default certificate authoritied from the client host system
will be used.
check-hostname check-hostname
This is a boolean setting that defaults to false. Verify the This is a boolean setting that defaults to true. Verify the
host name in the server certificate is as expected. host name in the server certificate is as expected.
server-hostname server-hostname
The expected server host name. This defaults to the host name The expected server host name. This defaults to the host name
used in the server address. This option must be used when used in the server address. This option must be used when
``verify-host`` is true and when a server address has no host ``check-hostname`` is true and when a server address has no host
name (localhost, or unix domain socket) or when there is more name (localhost, or unix domain socket) or when there is more
than one seerver and server hostnames differ. than one seerver and server hostnames differ.
Using this setting implies the ``verify-host`` setting. Using this setting implies a true value for the ``check-hostname`` setting.
This diff is collapsed.
...@@ -92,7 +92,7 @@ def alltests(): ...@@ -92,7 +92,7 @@ def alltests():
_unittests_only(suite, mod.test_suite()) _unittests_only(suite, mod.test_suite())
return suite return suite
tests_require = ['zope.testing', 'manuel', 'random2'] tests_require = ['zope.testing', 'manuel', 'random2', 'mock']
long_description = ( long_description = (
open('README.rst').read() open('README.rst').read()
......
...@@ -95,6 +95,7 @@ class ClientStorage(object): ...@@ -95,6 +95,7 @@ class ClientStorage(object):
blob_cache_size=None, blob_cache_size_check=10, blob_cache_size=None, blob_cache_size_check=10,
client_label=None, client_label=None,
cache=None, cache=None,
ssl = None, ssl_server_hostname=None,
# Mostly ignored backward-compatability options # Mostly ignored backward-compatability options
client=None, var=None, client=None, var=None,
min_disconnect_poll=1, max_disconnect_poll=None, min_disconnect_poll=1, max_disconnect_poll=None,
...@@ -139,10 +140,6 @@ class ClientStorage(object): ...@@ -139,10 +140,6 @@ class ClientStorage(object):
Defaults to None, in which case the cache is not Defaults to None, in which case the cache is not
persistent. See ClientCache for more info. persistent. See ClientCache for more info.
disconnect_poll
The delay in seconds between attempts to connect to the
server, in seconds. Defaults to 1 second.
wait_timeout wait_timeout
Maximum time to wait for results, including connecting. Maximum time to wait for results, including connecting.
...@@ -266,6 +263,7 @@ class ClientStorage(object): ...@@ -266,6 +263,7 @@ class ClientStorage(object):
addr, self, cache, storage, addr, self, cache, storage,
ZEO.asyncio.client.Fallback if read_only_fallback else read_only, ZEO.asyncio.client.Fallback if read_only_fallback else read_only,
wait_timeout or 30, wait_timeout or 30,
ssl = ssl, ssl_server_hostname=ssl_server_hostname,
) )
self._call = self._server.call self._call = self._server.call
self._async = self._server.async self._async = self._server.async
......
...@@ -769,6 +769,7 @@ class StorageServer: ...@@ -769,6 +769,7 @@ class StorageServer:
invalidation_queue_size=100, invalidation_queue_size=100,
invalidation_age=None, invalidation_age=None,
transaction_timeout=None, transaction_timeout=None,
ssl=None,
): ):
"""StorageServer constructor. """StorageServer constructor.
...@@ -841,7 +842,7 @@ class StorageServer: ...@@ -841,7 +842,7 @@ class StorageServer:
storage.registerDB(StorageServerDB(self, name)) storage.registerDB(StorageServerDB(self, name))
self.invalidation_age = invalidation_age self.invalidation_age = invalidation_age
self.zeo_storages_by_storage_id = {} # {storage_id -> [ZEOStorage]} self.zeo_storages_by_storage_id = {} # {storage_id -> [ZEOStorage]}
self.acceptor = ZEO.acceptor.Acceptor(addr, self.new_connection) self.acceptor = ZEO.acceptor.Acceptor(addr, self.new_connection, ssl)
if isinstance(addr, tuple) and addr[0]: if isinstance(addr, tuple) and addr[0]:
self.addr = self.acceptor.addr self.addr = self.acceptor.addr
else: else:
...@@ -1395,3 +1396,7 @@ class Serving(ServerEvent): ...@@ -1395,3 +1396,7 @@ class Serving(ServerEvent):
class Closed(ServerEvent): class Closed(ServerEvent):
pass pass
default_cert_authenticate = 'SIGNED'
def ssl_config(section):
from .sslconfig import ssl_config
return ssl_config(section, True)
...@@ -38,13 +38,34 @@ logger = logging.getLogger(__name__) ...@@ -38,13 +38,34 @@ logger = logging.getLogger(__name__)
class Acceptor(asyncore.dispatcher): class Acceptor(asyncore.dispatcher):
"""A server that accepts incoming RPC connections""" """A server that accepts incoming RPC connections"""
def __init__(self, addr, factory): def __init__(self, addr, factory, ssl=None):
self.socket_map = {} self.__socket_map = {}
asyncore.dispatcher.__init__(self, map=self.socket_map) asyncore.dispatcher.__init__(self, map=self.__socket_map)
self.addr = addr self.addr = addr
self.factory = factory
self.__ssl = ssl
if ssl is not None:
from ssl import SSLError
wrap_socket = ssl.wrap_socket
def ssl_factory(sock, addr):
try:
conn = wrap_socket(sock, server_side=True)
except SSLError:
logger.debug("SSL failure", exc_info=True)
else:
return factory(conn, addr)
self.__factory = ssl_factory
else:
self.__factory = factory
self._open_socket() self._open_socket()
__ssl_context = None
def __ssl_wrap_socket(self, sock):
return sock
def _open_socket(self): def _open_socket(self):
addr = self.addr addr = self.addr
...@@ -119,18 +140,20 @@ class Acceptor(asyncore.dispatcher): ...@@ -119,18 +140,20 @@ class Acceptor(asyncore.dispatcher):
if addr: # Sometimes None on Mac. See above. if addr: # Sometimes None on Mac. See above.
addr = addr[:2] addr = addr[:2]
sock = self.__ssl_wrap_socket(sock)
try: try:
c = self.factory(sock, addr) c = self.__factory(sock, addr)
except Exception: except Exception:
if sock.fileno() in asyncore.socket_map: if sock.fileno() in self.__socket_map:
del asyncore.socket_map[sock.fileno()] del self.__socket_map[sock.fileno()]
logger.exception("Error in handle_accept") logger.exception("Error in handle_accept")
else: else:
logger.info("connect from %s: %s", repr(addr), c) logger.info("connect from %s: %s", repr(addr), c)
def loop(self, timeout=30.0): def loop(self, timeout=30.0):
try: try:
asyncore.loop(map=self.socket_map, timeout=timeout) asyncore.loop(map=self.__socket_map, timeout=timeout)
except Exception: except Exception:
if not self.__closed: if not self.__closed:
raise # Unexpected exc raise # Unexpected exc
...@@ -142,4 +165,4 @@ class Acceptor(asyncore.dispatcher): ...@@ -142,4 +165,4 @@ class Acceptor(asyncore.dispatcher):
if not self.__closed: if not self.__closed:
self.__closed = True self.__closed = True
asyncore.dispatcher.close(self) asyncore.dispatcher.close(self)
logger.debug("Closed accepter, %s", len(self.socket_map)) logger.debug("Closed accepter, %s", len(self.__socket_map))
...@@ -36,7 +36,7 @@ class Protocol(base.Protocol): ...@@ -36,7 +36,7 @@ class Protocol(base.Protocol):
def __init__(self, loop, def __init__(self, loop,
addr, client, storage_key, read_only, connect_poll=1, addr, client, storage_key, read_only, connect_poll=1,
heartbeat_interval=60): heartbeat_interval=60, ssl=None, ssl_server_hostname=None):
"""Create a client interface """Create a client interface
addr is either a host,port tuple or a string file name. addr is either a host,port tuple or a string file name.
...@@ -54,6 +54,8 @@ class Protocol(base.Protocol): ...@@ -54,6 +54,8 @@ class Protocol(base.Protocol):
self.connect_poll = connect_poll self.connect_poll = connect_poll
self.heartbeat_interval = heartbeat_interval self.heartbeat_interval = heartbeat_interval
self.futures = {} # { message_id -> future } self.futures = {} # { message_id -> future }
self.ssl = ssl
self.ssl_server_hostname = ssl_server_hostname
self.connect() self.connect()
...@@ -81,7 +83,8 @@ class Protocol(base.Protocol): ...@@ -81,7 +83,8 @@ class Protocol(base.Protocol):
if isinstance(self.addr, tuple): if isinstance(self.addr, tuple):
host, port = self.addr host, port = self.addr
cr = self.loop.create_connection( cr = self.loop.create_connection(
self.protocol_factory, host or 'localhost', port) self.protocol_factory, host or 'localhost', port,
ssl=self.ssl, server_hostname=self.ssl_server_hostname)
else: else:
cr = self.loop.create_unix_connection( cr = self.loop.create_unix_connection(
self.protocol_factory, self.addr) self.protocol_factory, self.addr)
...@@ -265,7 +268,8 @@ class Client: ...@@ -265,7 +268,8 @@ class Client:
def __init__(self, loop, def __init__(self, loop,
addrs, client, cache, storage_key, read_only, connect_poll, addrs, client, cache, storage_key, read_only, connect_poll,
register_failed_poll=9): register_failed_poll=9,
ssl=None, ssl_server_hostname=None):
"""Create a client interface """Create a client interface
addr is either a host,port tuple or a string file name. addr is either a host,port tuple or a string file name.
...@@ -281,6 +285,8 @@ class Client: ...@@ -281,6 +285,8 @@ class Client:
self.connect_poll = connect_poll self.connect_poll = connect_poll
self.register_failed_poll = register_failed_poll self.register_failed_poll = register_failed_poll
self.client = client self.client = client
self.ssl = ssl
self.ssl_server_hostname = ssl_server_hostname
for name in Protocol.client_delegated: for name in Protocol.client_delegated:
setattr(self, name, getattr(client, name)) setattr(self, name, getattr(client, name))
self.cache = cache self.cache = cache
...@@ -344,6 +350,8 @@ class Client: ...@@ -344,6 +350,8 @@ class Client:
self.protocols = [ self.protocols = [
Protocol(self.loop, addr, self, Protocol(self.loop, addr, self,
self.storage_key, self.read_only, self.connect_poll, self.storage_key, self.read_only, self.connect_poll,
ssl=self.ssl,
ssl_server_hostname=self.ssl_server_hostname,
) )
for addr in self.addrs for addr in self.addrs
] ]
...@@ -584,14 +592,16 @@ class Client: ...@@ -584,14 +592,16 @@ class Client:
class ClientRunner: class ClientRunner:
def set_options(self, addrs, wrapper, cache, storage_key, read_only, def set_options(self, addrs, wrapper, cache, storage_key, read_only,
timeout=30, disconnect_poll=1): timeout=30, disconnect_poll=1,
**kwargs):
self.__args = (addrs, wrapper, cache, storage_key, read_only, self.__args = (addrs, wrapper, cache, storage_key, read_only,
disconnect_poll) disconnect_poll)
self.__kwargs = kwargs
self.timeout = timeout self.timeout = timeout
def setup_delegation(self, loop): def setup_delegation(self, loop):
self.loop = loop self.loop = loop
self.client = Client(loop, *self.__args) self.client = Client(loop, *self.__args, **self.__kwargs)
self.call_threadsafe = self.client.call_threadsafe self.call_threadsafe = self.client.call_threadsafe
self.call_async_threadsafe = self.client.call_async_threadsafe self.call_async_threadsafe = self.client.call_async_threadsafe
...@@ -685,9 +695,10 @@ class ClientThread(ClientRunner): ...@@ -685,9 +695,10 @@ class ClientThread(ClientRunner):
def __init__(self, addrs, client, cache, def __init__(self, addrs, client, cache,
storage_key='1', read_only=False, timeout=30, storage_key='1', read_only=False, timeout=30,
disconnect_poll=1): disconnect_poll=1, ssl=None, ssl_server_hostname=None):
self.set_options(addrs, client, cache, storage_key, read_only, self.set_options(addrs, client, cache, storage_key, read_only,
timeout, disconnect_poll) timeout, disconnect_poll,
ssl=ssl, ssl_server_hostname=ssl_server_hostname)
self.thread = threading.Thread( self.thread = threading.Thread(
target=self.run, target=self.run,
name="%s zeo client networking thread" % client.__name__, name="%s zeo client networking thread" % client.__name__,
......
<component> <component>
<sectiontype name="zeo"> <import package="ZODB"/>
<sectiontype name="ssl" datatype="ZEO.zconfig.client_ssl">
<key name="certificate" datatype="existing-dirpath" required="yes">
<description> <description>
The content of a ZEO section describe operational parameters The full path to an SSL certificate file.
of a ZEO server except for the storage(s) to be served.
</description> </description>
</key>
<key name="address" datatype="socket-binding-address" <key name="key" datatype="existing-dirpath" required="no">
required="yes">
<description> <description>
The address at which the server should listen. This can be in The full path to an SSL key file for the client certificate.
the form 'host:port' to signify a TCP/IP connection or a
pathname string to signify a Unix domain socket connection (at
least one '/' is required). A hostname may be a DNS name or a
dotted IP address. If the hostname is omitted, the platform's
default behavior is used when binding the listening socket (''
is passed to socket.bind() as the hostname portion of the
address).
</description> </description>
</key> </key>
<key name="read-only" datatype="boolean" <key name="password-function" required="no">
required="no"
default="false">
<description> <description>
Flag indicating whether the server should operate in read-only Dotted name of importable function for retrieving a password
mode. Defaults to false. Note that even if the server is for the client certificate key.
operating in writable mode, individual storages may still be
read-only. But if the server is in read-only mode, no write
operations are allowed, even if the storages are writable. Note
that pack() is considered a read-only operation.
</description> </description>
</key> </key>
<key name="invalidation-queue-size" datatype="integer" <key name="authenticate" datatype="existing-dirpath" required="no">
required="no"
default="100">
<description> <description>
The storage server keeps a queue of the objects modified by the Path to a file or directory containing server certificates to be
last N transactions, where N == invalidation_queue_size. This authenticated.
queue is used to speed client cache verification when a client
disconnects for a short period of time.
</description> </description>
</key> </key>
<key name="invalidation-age" datatype="float" required="no"> <key name="check-hostname" datatype="boolean" required="no">
<description> <description>
The maximum age of a client for which quick-verification Verify the host name in the server certificate is as expected.
invalidations will be provided by iterating over the served </description>
storage. This option should only be used if the served storage </key>
supports efficient iteration from a starting point near the
end of the transaction history (e.g. end of file). <key name="server-hostname" required="no">
<description>
Host name to use for SSL host name checks.
If ``check-hostname`` is true then use this as the
value to check. If an address is a host/port pair, then this
defaults to the host in the address.
</description> </description>
</key> </key>
<key name="transaction-timeout" datatype="integer" </sectiontype>
required="no">
<sectiontype name="clientstorage" datatype="ZEO.zconfig.ClientStorageConfig"
implements="ZODB.storage">
<section type="ssl" name="*" attribute="ssl" />
<multikey name="server" datatype="socket-connection-address" required="yes"
/>
<key name="cache-size" datatype="byte-size" default="20MB">
<description> <description>
The maximum amount of time to wait for a transaction to commit The cache size in bytes, KB or MB. This defaults to a 20MB.
after acquiring the storage lock, specified in seconds. If the Optional ``KB`` or ``MB`` suffixes can (and usually are) used to
transaction takes too long, the client connection will be closed specify units other than bytes.
and the transaction aborted.
</description> </description>
</key> </key>
<key name="pid-filename" datatype="existing-dirpath" <key name="cache-path" required="no">
required="no"> <description>
The file path of a persistent cache file
</description>
</key>
<key name="blob-dir" required="no">
<description>
Path name to the blob cache directory.
</description>
</key>
<key name="shared-blob-dir" required="no" default="no"
datatype="boolean">
<description>
Tells whether the cache is a shared writable directory
and that the ZEO protocol should not transfer the file
but only the filename when committing.
</description>
</key>
<key name="blob-cache-size" required="no" datatype="byte-size">
<description>
Maximum size of the ZEO blob cache, in bytes. If not set, then
the cache size isn't checked and the blob directory will
grow without bound.
This option is ignored if shared_blob_dir is true.
</description>
</key>
<key name="blob-cache-size-check" required="no" datatype="integer">
<description>
ZEO check size as percent of blob_cache_size. The ZEO
cache size will be checked when this many bytes have been
loaded into the cache. Defaults to 10% of the blob cache
size. This option is ignored if shared_blob_dir is true.
</description>
</key>
<key name="read-only" datatype="boolean" default="off">
<description>
A flag indicating whether this should be a read-only storage,
defaulting to false (i.e. writing is allowed by default).
</description>
</key>
<key name="read-only-fallback" datatype="boolean" default="off">
<description>
A flag indicating whether a read-only remote storage should be
acceptable as a fallback when no writable storages are
available. Defaults to false. At most one of read_only and
read_only_fallback should be true.
</description>
</key>
<key name="wait-timeout" datatype="integer" default="30">
<description>
How long to wait for an initial connection, defaulting to 30
seconds. If an initial connection can't be made within this time
limit, then creation of the client storage will fail with a
``ZEO.Exceptions.ClientDisconnected`` exception.
After the initial connection, if the client is disconnected:
- In-flight server requests will fail with a
``ZEO.Exceptions.ClientDisconnected`` exception.
- New requests will block for up to ``wait_timeout`` waiting for a
connection to be established before failing with a
``ZEO.Exceptions.ClientDisconnected`` exception.
</description>
</key>
<key name="client-label" required="no">
<description>
A label for the client in server logs
</description>
</key>
<!-- The following are undocumented, but not gone. :) -->
<key name="storage" default="1">
<description> <description>
The full path to the file in which to write the ZEO server's Process ID The name of the storage that the client wants to use. If the
at startup. If omitted, $INSTANCE/var/ZEO.pid is used. ZEO server serves more than one storage, the client selects
the storage it wants to use by name. The default name is '1',
which is also the default name for the ZEO server.
</description> </description>
<metadefault>$INSTANCE/var/ZEO.pid (or $clienthome/ZEO.pid)</metadefault>
</key> </key>
<!-- DM 2006-06-12: added option --> <key name="name" default="">
<key name="drop-cache-rather-verify" datatype="boolean"
required="no" default="false">
<description> <description>
indicates that the cache should be dropped rather than The storage name. If unspecified, the address of the server
verified when the verification optimization is not will be used as the name.
available (e.g. when the ZEO server restarted).
</description> </description>
</key> </key>
......
...@@ -105,6 +105,7 @@ class ZEOOptionsMixin: ...@@ -105,6 +105,7 @@ class ZEOOptionsMixin:
"t:", "timeout=", float) "t:", "timeout=", float)
self.add('pid_file', 'zeo.pid_filename', self.add('pid_file', 'zeo.pid_filename',
None, 'pid-file=') None, 'pid-file=')
self.add("ssl", "zeo.ssl")
class ZEOOptions(ZDOptions, ZEOOptionsMixin): class ZEOOptions(ZDOptions, ZEOOptionsMixin):
...@@ -341,6 +342,7 @@ def create_server(storages, options): ...@@ -341,6 +342,7 @@ def create_server(storages, options):
invalidation_queue_size = options.invalidation_queue_size, invalidation_queue_size = options.invalidation_queue_size,
invalidation_age = options.invalidation_age, invalidation_age = options.invalidation_age,
transaction_timeout = options.transaction_timeout, transaction_timeout = options.transaction_timeout,
ssl = options.ssl,
) )
......
...@@ -12,7 +12,7 @@ ...@@ -12,7 +12,7 @@
<import package="ZODB"/> <import package="ZODB"/>
<!-- Use the ZEO server information structure. --> <!-- Use the ZEO server information structure. -->
<import package="ZEO"/> <import package="ZEO" file="server.xml" />
<import package="ZConfig.components.logger"/> <import package="ZConfig.components.logger"/>
......
<component>
<sectiontype name="ssl" datatype="ZEO.zconfig.server_ssl">
<key name="certificate" datatype="existing-dirpath" required="yes">
<description>
The full path to an SSL certificate file.
</description>
</key>
<key name="key" datatype="existing-dirpath" required="no">
<description>
The full path to an SSL key file for the server certificate.
</description>
</key>
<key name="password-function" required="no">
<description>
Dotted name of importable function for retrieving a password
for the client certificate key.
</description>
</key>
<key name="authenticate" required="yes">
<description>
Path to a file or directory containing client certificates to
be authenticated. This can also be - or SIGNED to require
signed client certificates.
</description>
</key>
</sectiontype>
<sectiontype name="zeo">
<section type="ssl" name="*" attribute="ssl" />
<description>
The content of a ZEO section describe operational parameters
of a ZEO server except for the storage(s) to be served.
</description>
<key name="address" datatype="socket-binding-address"
required="yes">
<description>
The address at which the server should listen. This can be in
the form 'host:port' to signify a TCP/IP connection or a
pathname string to signify a Unix domain socket connection (at
least one '/' is required). A hostname may be a DNS name or a
dotted IP address. If the hostname is omitted, the platform's
default behavior is used when binding the listening socket (''
is passed to socket.bind() as the hostname portion of the
address).
</description>
</key>
<key name="read-only" datatype="boolean"
required="no"
default="false">
<description>
Flag indicating whether the server should operate in read-only
mode. Defaults to false. Note that even if the server is
operating in writable mode, individual storages may still be
read-only. But if the server is in read-only mode, no write
operations are allowed, even if the storages are writable. Note
that pack() is considered a read-only operation.
</description>
</key>
<key name="invalidation-queue-size" datatype="integer"
required="no"
default="100">
<description>
The storage server keeps a queue of the objects modified by the
last N transactions, where N == invalidation_queue_size. This
queue is used to speed client cache verification when a client
disconnects for a short period of time.
</description>
</key>
<key name="invalidation-age" datatype="float" required="no">
<description>
The maximum age of a client for which quick-verification
invalidations will be provided by iterating over the served
storage. This option should only be used if the served storage
supports efficient iteration from a starting point near the
end of the transaction history (e.g. end of file).
</description>
</key>
<key name="transaction-timeout" datatype="integer"
required="no">
<description>
The maximum amount of time to wait for a transaction to commit
after acquiring the storage lock, specified in seconds. If the
transaction takes too long, the client connection will be closed
and the transaction aborted.
</description>
</key>
<key name="pid-filename" datatype="existing-dirpath"
required="no">
<description>
The full path to the file in which to write the ZEO server's Process ID
at startup. If omitted, $INSTANCE/var/ZEO.pid is used.
</description>
<metadefault>$INSTANCE/var/ZEO.pid (or $clienthome/ZEO.pid)</metadefault>
</key>
</sectiontype>
</component>
-----BEGIN CERTIFICATE-----
MIID/TCCAuWgAwIBAgIJAJWOSC4oLyp9MA0GCSqGSIb3DQEBBQUAMFwxCzAJBgNV
BAYTAlVTMQswCQYDVQQIEwJWQTENMAsGA1UEChMEWk9EQjERMA8GA1UEAxMIem9k
Yi5vcmcxHjAcBgkqhkiG9w0BCQEWD2NsaWVudEB6b2RiLm9yZzAeFw0xNjA2MjMx
NTA3MTNaFw0xNzA2MjMxNTA3MTNaMFwxCzAJBgNVBAYTAlVTMQswCQYDVQQIEwJW
QTENMAsGA1UEChMEWk9EQjERMA8GA1UEAxMIem9kYi5vcmcxHjAcBgkqhkiG9w0B
CQEWD2NsaWVudEB6b2RiLm9yZzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoC
ggEBANqtLqtrzwDv0nakKiTX5ZtSHOaTmfwHzHsZJkcNf7kJUgGtE0oe3cIj4iAC
CCpPfUf9OfIA1NpmDsvPMqw80ho1o9g8QZWfW6QOTj2kbnanrRqMDmRvrWlzMQIe
+7EabYxbTjyduk76N2Sa4Tf/my6Yton3zyKtdjSJzoQ/SAKT+Nvjt5s47I4THEFY
gN7Njbg1FyihKwuwR64EUsyBanutKvXVT7gnB1V2cQhn+LW+NwgzsxKnptvyvBGr
Ago+uoxrHlIQu59xznS2vA3Ck2K3hIOnXpXYYGeRYKzplZLZnCfZ2uQheiO3ioEO
UCXICbPMxA7IEpTC75j1n9a3HKcCAwEAAaOBwTCBvjAdBgNVHQ4EFgQUCg1EhkHz
qYFOgbI/D6zR1tcwHBcwgY4GA1UdIwSBhjCBg4AUCg1EhkHzqYFOgbI/D6zR1tcw
HBehYKReMFwxCzAJBgNVBAYTAlVTMQswCQYDVQQIEwJWQTENMAsGA1UEChMEWk9E
QjERMA8GA1UEAxMIem9kYi5vcmcxHjAcBgkqhkiG9w0BCQEWD2NsaWVudEB6b2Ri
Lm9yZ4IJAJWOSC4oLyp9MAwGA1UdEwQFMAMBAf8wDQYJKoZIhvcNAQEFBQADggEB
AJk3TviNGmjzCuDzLajeLEB9Iy285Fl3D/3TvThSDECS3cUq+i8fQm0cjOYnE/rK
6Lpg6soeQFetoWQsNT2uvxyv3iZEOtBwNhQKaKTkzIRTmMx/aWM0zG0c3psepC6c
1Fgp0HAts2JKC4Ni7zHFBDb8YZi87IUHYNKuJKcUWKiEgeHu2zCI1Q43FMSKoaG8
XwYi1Mxw6TQQtjZrMnNPSeO7zySBuCw10bCZSMC5xvsqckfREifRT//4A0/COWYK
/p6TZMTaMjrK8fOaPpap314QnLf80P6oLEZ7wkghaNuyq8IzgATuxYVy21132MNB
qZIUS+iblQAZDSHnQJoehQQ=
-----END CERTIFICATE-----
-----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
...@@ -40,9 +40,6 @@ class ZEOConfig: ...@@ -40,9 +40,6 @@ class ZEOConfig:
addr = '%s:%s' % addr addr = '%s:%s' % addr
self.address = addr self.address = addr
self.read_only = None self.read_only = None
self.invalidation_queue_size = None
self.invalidation_age = None
self.transaction_timeout = None
self.loglevel = 'INFO' self.loglevel = 'INFO'
def dump(self, f): def dump(self, f):
...@@ -50,13 +47,16 @@ class ZEOConfig: ...@@ -50,13 +47,16 @@ class ZEOConfig:
print("address " + self.address, file=f) print("address " + self.address, file=f)
if self.read_only is not None: if self.read_only is not None:
print("read-only", self.read_only and "true" or "false", file=f) print("read-only", self.read_only and "true" or "false", file=f)
if self.invalidation_queue_size is not None:
print("invalidation-queue-size", for name in (
self.invalidation_queue_size, file=f) 'invalidation_queue_size', 'invalidation_age',
if self.invalidation_age is not None: 'transaction_timeout', 'pid_filename',
print("invalidation-age", self.invalidation_age, file=f) 'ssl_certificate', 'ssl_key',
if self.transaction_timeout is not None: ):
print("transaction-timeout", self.transaction_timeout, file=f) v = getattr(self, name, None)
if v:
print(name.replace('_', '-'), v, file=f)
print("</zeo>", file=f) print("</zeo>", file=f)
print(""" print("""
...@@ -177,6 +177,7 @@ def start_zeo_server(storage_conf=None, zeo_conf=None, port=None, keep=False, ...@@ -177,6 +177,7 @@ def start_zeo_server(storage_conf=None, zeo_conf=None, port=None, keep=False,
storage_conf = '<blobstorage>\nblob-dir %s\n%s\n</blobstorage>' % ( storage_conf = '<blobstorage>\nblob-dir %s\n%s\n</blobstorage>' % (
blob_dir, storage_conf) blob_dir, storage_conf)
if zeo_conf is None or isinstance(zeo_conf, dict):
if port is None: if port is None:
raise AssertionError("The port wasn't specified") raise AssertionError("The port wasn't specified")
...@@ -184,18 +185,16 @@ def start_zeo_server(storage_conf=None, zeo_conf=None, port=None, keep=False, ...@@ -184,18 +185,16 @@ def start_zeo_server(storage_conf=None, zeo_conf=None, port=None, keep=False,
addr = 'localhost', port addr = 'localhost', port
else: else:
addr = port addr = port
adminaddr = port+'-test'
if zeo_conf is None or isinstance(zeo_conf, dict):
z = ZEOConfig(addr) z = ZEOConfig(addr)
if zeo_conf: if zeo_conf:
z.__dict__.update(zeo_conf) z.__dict__.update(zeo_conf)
zeo_conf = z zeo_conf = str(z)
# Store the config info in a temp file. # Store the config info in a temp file.
tmpfile = tempfile.mktemp(".conf", dir=os.getcwd()) tmpfile = tempfile.mktemp(".conf", dir=os.getcwd())
fp = open(tmpfile, 'w') fp = open(tmpfile, 'w')
zeo_conf.dump(fp) fp.write(zeo_conf + '\n\n')
fp.write(storage_conf) fp.write(storage_conf)
fp.close() fp.close()
......
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
-----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
-----BEGIN CERTIFICATE-----
MIID8DCCAtigAwIBAgIJALop9P9MBfzLMA0GCSqGSIb3DQEBBQUAMFgxCzAJBgNV
BAYTAlVTMQswCQYDVQQIEwJWQTENMAsGA1UEChMEWk9EQjERMA8GA1UEAxMIem9k
Yi5vcmcxGjAYBgkqhkiG9w0BCQEWC3B3QHpvZGIub3JnMB4XDTE2MDYyMzE1MTAz
MVoXDTE3MDYyMzE1MTAzMVowWDELMAkGA1UEBhMCVVMxCzAJBgNVBAgTAlZBMQ0w
CwYDVQQKEwRaT0RCMREwDwYDVQQDEwh6b2RiLm9yZzEaMBgGCSqGSIb3DQEJARYL
cHdAem9kYi5vcmcwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDKw/iw
N1EPddU9QQQ+OnCJv9G3rbTOPt4zEbpfTROIHTME3krFKPALrGF2aK+oBpHx3/TZ
HN5UvWK/jmGtDL9jekKCAaeAaVIKlESUS6DIxZY+FaO3re/1fbmBNRz8Cnn1raAw
/4YZRDPvblooH4Nt5m7uooGAIIDPft3fInhmGboOoIpXc7nMGVGOWXlDN5I9oFmm
4vby4CUMy3A/0wnHgTuMNy7Tpjgz2E/1MRAOyWQ7PZYiASs4ycZfas8058O8DI+o
rSYyum/czecIz52P6jbx5LWvcKDWac8QbJoHPelthYtxcMHee2+Nh6MWW688CBzq
HSeFAdNO3d9kMiFpAgMBAAGjgbwwgbkwHQYDVR0OBBYEFDui1OC2+2z2rHADglk5
tGOndxhoMIGJBgNVHSMEgYEwf4AUO6LU4Lb7bPascAOCWTm0Y6d3GGihXKRaMFgx
CzAJBgNVBAYTAlVTMQswCQYDVQQIEwJWQTENMAsGA1UEChMEWk9EQjERMA8GA1UE
AxMIem9kYi5vcmcxGjAYBgkqhkiG9w0BCQEWC3B3QHpvZGIub3JnggkAuin0/0wF
/MswDAYDVR0TBAUwAwEB/zANBgkqhkiG9w0BAQUFAAOCAQEAiEYO8MZ3OG8sqy9t
AtUZbv0aTsIUzy/QTUKKDUo8qwKNOylqyqGAZV0tZ5eCoqIGFAwRJBBymIizU3zH
U1k2MnYZMVi7uYwSy+qwg52+X7GLl/kaAfx8kNvpr274CuZQnLojJS+K8HtH5Pom
YD3gTO3OxGS4IS6uf6DD+mf+C9OBnTl47P0HA0/eHBEXVSc2vsv30H/UoW5VbZ6z
6TWkoPwSMVhCNRRRif4/eqCLh24/h5b4uvAC+tsrIPQ9If7EsqVTNMCbAkv3ib6g
OmaCdbrGkqvD3UVn7i5ci96UZoF80EWNZiwhMdvQtMfOAR4jHQ1pTepJni6JwzZP
UMNDpQ==
-----END CERTIFICATE-----
-----BEGIN RSA PRIVATE KEY-----
Proc-Type: 4,ENCRYPTED
DEK-Info: DES-EDE3-CBC,769B900D03925712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-----END RSA PRIVATE KEY-----
This diff is collapsed.
...@@ -2,33 +2,37 @@ ...@@ -2,33 +2,37 @@
""" """
import os import os
default_cert_authenticate = 'SIGNED', '-'
def ssl_config(section, server): def ssl_config(section, server):
import ssl import ssl
context = ssl.SSLContext(ssl.PROTOCOL_SSLv23) cafile = capath = None
if section.certificate:
context.load_cert_chain(section.certificate,
keyfile=section.key)
auth = section.authenticate auth = section.authenticate
if auth: if auth:
if auth in default_cert_authenticate: if os.path.isdir(auth):
context.load_default_certs( capath=auth
ssl.Purpose.CLIENT_AUTH if server else ssl.Purpose.SERVER_AUTH)
elif os.path.isdir(auth):
context.load_verify_locations(capath=auth)
else: else:
context.load_verify_locations(cafile=auth) cafile=auth
context = ssl.create_default_context(
ssl.Purpose.CLIENT_AUTH, cafile=cafile, capath=capath)
if section.certificate:
password = section.password_function
if password:
module, name = password.rsplit('.', 1)
module = __import__(module, globals(), locals(), ['*'], 0)
password = getattr(module, name)
context.load_cert_chain(section.certificate, section.key, password)
context.verify_mode = ssl.CERT_REQUIRED context.verify_mode = ssl.CERT_REQUIRED
else:
context.verify_mode = ssl.CERT_NONE
if server: if server:
context.check_hostname = False context.check_hostname = False
return context return context
context.check_hostname = section.check_hostname or section.server_hostname context.check_hostname = bool(
section.check_hostname is None and (section.server_hostname or not auth)
or section.check_hostname)
return context, section.server_hostname return context, section.server_hostname
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment