Skip to content

Z
ZEO
Commit d6a3eb79 authored by Jim Fulton's avatar Jim Fulton
Browse files
Options

Reworked docs in preparation for release.

parent fafc181d
Hide whitespace changes
Inline Side-by-side
Showing with 383 additions and 527 deletions
README.txt
View file @ d6a3eb79
====
ZODB
====
===
ZEO
===
ZEO provides a client-server storage implementation for ZODB.
Usage
=====
ZEO is a client-server system for sharing a single storage among many
clients. When you use ZEO, the storage is opened in the ZEO server
process. Client programs connect to this process using a ZEO
ClientStorage. ZEO provides a consistent view of the database to all
clients. The ZEO client and server communicate using a custom RPC
protocol layered on top of TCP.
There are several configuration options that affect the behavior of a
ZEO server. This section describes how a few of these features
working. Subsequent sections describe how to configure every option.
Client cache
~~~~~~~~~~~~
Each ZEO client keeps an on-disk cache of recently used objects to
avoid fetching those objects from the server each time they are
requested. It is usually faster to read the objects from disk than it
is to fetch them over the network. The cache can also provide
read-only copies of objects during server outages.
The cache may be persistent or transient. If the cache is persistent,
then the cache files are retained for use after process restarts. A
non-persistent cache uses temporary files that are removed when the
client storage is closed.
The client cache size is configured when the ClientStorage is created.
The default size is 20MB, but the right size depends entirely on the
particular database. Setting the cache size too small can hurt
performance, but in most cases making it too big just wastes disk
space. The document "Client cache tracing" describes how to collect a
cache trace that can be used to determine a good cache size.
ZEO uses invalidations for cache consistency. Every time an object is
modified, the server sends a message to each client informing it of
the change. The client will discard the object from its cache when it
receives an invalidation. These invalidations are often batched.
Each time a client connects to a server, it must verify that its cache
contents are still valid. (It did not receive any invalidation
messages while it was disconnected.) There are several mechanisms
used to perform cache verification. In the worst case, the client
sends the server a list of all objects in its cache along with their
timestamps; the server sends back an invalidation message for each
stale object. The cost of verification is one drawback to making the
cache too large.
Note that every time a client crashes or disconnects, it must verify
its cache. Every time a server crashes, all of its clients must
verify their caches.
The cache verification process is optimized in two ways to eliminate
costs when restarting clients and servers. Each client keeps the
timestamp of the last invalidation message it has seen. When it
connects to the server, it checks to see if any invalidation messages
were sent after that timestamp. If not, then the cache is up-to-date
and no further verification occurs. The other optimization is the
invalidation queue, described below.
Invalidation queue
~~~~~~~~~~~~~~~~~~
The ZEO server keeps a queue of recent invalidation messages in
memory. When a client connects to the server, it sends the timestamp
of the most recent invalidation message it has received. If that
message is still in the invalidation queue, then the server sends the
client all the missing invalidations. This is often cheaper than
perform full cache verification.
The default size of the invalidation queue is 100. If the
invalidation queue is larger, it will be more likely that a client
that reconnects will be able to verify its cache using the queue. On
the other hand, a large queue uses more memory on the server to store
the message. Invalidation messages tend to be small, perhaps a few
hundred bytes each on average; it depends on the number of objects
modified by a transaction.
Transaction timeouts
~~~~~~~~~~~~~~~~~~~~
A ZEO server can be configured to timeout a transaction if it takes
too long to complete. Only a single transaction can commit at a time;
so if one transaction takes too long, all other clients will be
delayed waiting for it. In the extreme, a client can hang during the
commit process. If the client hangs, the server will be unable to
commit other transactions until it restarts. A well-behaved client
will not hang, but the server can be configured with a transaction
timeout to guard against bugs that cause a client to hang.
If any transaction exceeds the timeout threshold, the client's
connection to the server will be closed and the transaction aborted.
Once the transaction is aborted, the server can start processing other
client's requests. Most transactions should take very little time to
commit. The timer begins for a transaction after all the data has
been sent to the server. At this point, the cost of commit should be
dominated by the cost of writing data to disk; it should be unusual
for a commit to take longer than 1 second. A transaction timeout of
30 seconds should tolerate heavy load and slow communications between
client and server, while guarding against hung servers.
When a transaction times out, the client can be left in an awkward
position. If the timeout occurs during the second phase of the two
phase commit, the client will log a panic message. This should only
cause problems if the client transaction involved multiple storages.
If it did, it is possible that some storages committed the client
changes and others did not.
Connection management
~~~~~~~~~~~~~~~~~~~~~
A ZEO client manages its connection to the ZEO server. If it loses
the connection, it attempts to reconnect. While
it is disconnected, it can satisfy some reads by using its cache.
The client can be configured to wait for a connection when it is created
or to return immediately and provide data from its persistent cache.
It usually simplifies programming to have the client wait for a
connection on startup.
When the client is disconnected, it polls periodically to see if the
server is available. The rate at which it polls is configurable.
The client can be configured with multiple server addresses. In this
case, it assumes that each server has identical content and will use
any server that is available. It is possible to configure the client
to accept a read-only connection to one of these servers if no
read-write connection is available. If it has a read-only connection,
it will continue to poll for a read-write connection. This feature
supports the Zope Replication Services product,
http://www.zope.com/Products/ZopeProducts/ZRS. In general, it could
be used to with a system that arranges to provide hot backups of
servers in the case of failure.
If a single address resolves to multiple IPv4 or IPv6 addresses,
the client will connect to an arbitrary of these addresses.
Authentication
~~~~~~~~~~~~~~
ZEO supports optional authentication of client and server using a
password scheme similar to HTTP digest authentication (RFC 2069). It
is a simple challenge-response protocol that does not send passwords
in the clear, but does not offer strong security. The RFC discusses
many of the limitations of this kind of protocol. Note that this
feature provides authentication only. It does not provide encryption
or confidentiality.
The challenge-response also produces a session key that is used to
generate message authentication codes for each ZEO message. This
should prevent session hijacking.
Guard the password database as if it contained plaintext passwords.
It stores the hash of a username and password. This does not expose
the plaintext password, but it is sensitive nonetheless. An attacker
with the hash can impersonate the real user. This is a limitation of
the simple digest scheme.
The authentication framework allows third-party developers to provide
new authentication modules.
Installing software
-------------------
Introduction
============
ZEO is installed like other Python packages using pip, easy_install,
buildout, etc.
Configuring server
------------------
The script ``runzeo`` runs the ZEO server. The server can be
configured using command-line arguments or a config file. This
document only describes the config file. Run runzeo.py
-h to see the list of command-line arguments.
The ``runzeo`` script imports the ZEO package. ZEO must either be
installed in Python's site-packages directory or be in a directory on
PYTHONPATH.
The configuration file specifies the underlying storage the server
uses, the address it binds, and a few other optional parameters.
An example is::
<zeo>
address zeo.example.com:8090
</zeo>
<filestorage>
path /var/tmp/Data.fs
</filestorage>
<eventlog>
<logfile>
path /var/tmp/zeo.log
format %(asctime)s %(message)s
</logfile>
</eventlog>
This file configures a server to use a FileStorage from
``/var/tmp/Data.fs``. The server listens on port 8090 of
zeo.example.com. The ZEO server writes its log file to
/var/tmp/zeo.log and uses a custom format for each line. Assuming the
example configuration it stored in zeo.config, you can run a server by
typing::
python runzeo -C zeo.config
A configuration file consists of a <zeo> section and a storage
section, where the storage section can use any of the valid ZODB
storage types. It may also contain an eventlog configuration. See
the document "Configuring a ZODB database" for more information about
configuring storages and eventlogs.
The zeo section must list the address. All the other keys are
optional.
address
The address at which the server should listen. This can be in
the form 'host:port' to signify a TCP/IP connection or a
pathname string to signify a Unix domain socket connection (at
least one '/' is required). A hostname may be a DNS name or a
dotted IP address. If the hostname is omitted, the platform's
default behavior is used when binding the listening socket (''
is passed to socket.bind() as the hostname portion of the
address).
read-only
Flag indicating whether the server should operate in read-only
mode. Defaults to false. Note that even if the server is
operating in writable mode, individual storages may still be
read-only. But if the server is in read-only mode, no write
operations are allowed, even if the storages are writable. Note
that pack() is considered a read-only operation.
invalidation-queue-size
The storage server keeps a queue of the objects modified by the
last N transactions, where N == invalidation_queue_size. This
queue is used to speed client cache verification when a client
disconnects for a short period of time.
transaction-timeout
The maximum amount of time to wait for a transaction to commit
after acquiring the storage lock, specified in seconds. If the
transaction takes too long, the client connection will be closed
and the transaction aborted.
authentication-protocol
The name of the protocol used for authentication. The
only protocol provided with ZEO is "digest," but extensions
may provide other protocols.
authentication-database
The path of the database containing authentication credentials.
authentication-realm
The authentication realm of the server. Some authentication
schemes use a realm to identify the logic set of usernames
that are accepted by this server.
Configuring clients
-------------------
The ZODB package provides a set of tools for using the Zope Object
Database (ZODB). The components you get with the ZODB release are as
follows:
The ZEO client can also be configured using ZConfig. The ZODB.config
module provides several function for opening a storage based on its
configuration.
- Core ZODB, including the persistence machinery
- Standard storages such as FileStorage
- The persistent BTrees modules
- ZEO, for scalability needs
- documentation (needs a lot more work)
- ZODB.config.storageFromString()
- ZODB.config.storageFromFile()
- ZODB.config.storageFromURL()
Our primary development platforms are Linux, Mac OS X, and Windows
XP. The test suite should pass without error on all of these
platforms, although it can take a long time on Windows -- longer if
you use ZoneAlarm. Many particularly slow tests are skipped unless
you pass --all as an argument to test.py.
The ZEO client configuration requires the server address be
specified. Everything else is optional. An example configuration is::
Compatibility
=============
<zeoclient>
server zeo.example.com:8090
</zeoclient>
ZODB 3.10 requires Python 2.5 or later.
The other configuration options are listed below.
Note --
When using ZEO and upgrading from Python 2.4, you need to upgrade
clients and servers at the same time, or upgrade clients first and
then servers. Clients running Python 2.5 or 2.6 will work with
servers running Python 2.4. Clients running Python 2.4 won't work
properly with servers running Python 2.5 or later due to changes in
the way Python implements exceptions.
cache-size
The maximum size of the client cache, in bytes.
ZODB ZEO clients from ZODB 3.2 on can talk to ZODB 3.10 servers. ZODB
ZEO 3.10 Clients can talk to ZODB 3.8, 3.9, and 3.10 ZEO servers.
name
The storage name. If unspecified, the address of the server
will be used as the name.
Note --
ZEO 3.10 servers don't support undo for older clients.
client
Enables persistent cache files. The string passed here is
used to construct the cache filenames. If it is not
specified, the client creates a temporary cache that will
only be used by the current object.
Prerequisites
=============
var
The directory where persistent cache files are stored. By
default cache files, if they are persistent, are stored in
the current directory.
You must have Python installed. If you're using a system Python
install, make sure development support is installed too.
min-disconnect-poll
The minimum delay in seconds between attempts to connect to
the server, in seconds. Defaults to 5 seconds.
You also need the transaction, zc.lockfile, ZConfig, zdaemon,
zope.event, zope.interface, zope.proxy and zope.testing packages. If
you don't have them and you can connect to the Python Package Index,
then these will be installed for you if you don't have them.
max-disconnect-poll
The maximum delay in seconds between attempts to connect to
the server, in seconds. Defaults to 300 seconds.
Installation
============
wait
A boolean indicating whether the constructor should wait
for the client to connect to the server and verify the cache
before returning. The default is true.
ZODB is released as a distutils package. The easiest ways to build
and install it are to use `easy_install
<http://peak.telecommunity.com/DevCenter/EasyInstall>`_, or
`zc.buildout <http://www.python.org/pypi/zc.buildout>`_.
read-only
A flag indicating whether this should be a read-only storage,
defaulting to false (i.e. writing is allowed by default).
To install by hand, first install the dependencies, ZConfig, zdaemon,
zope.interface, zope.proxy and zope.testing. These can be found
in the `Python Package Index <http://www.python.org/pypi>`_.
read-only-fallback
A flag indicating whether a read-only remote storage should be
acceptable as a fallback when no writable storages are
available. Defaults to false. At most one of read_only and
read_only_fallback should be true.
To run the tests, use the test setup command::
realm
The authentication realm of the server. Some authentication
schemes use a realm to identify the logic set of usernames
that are accepted by this server.
python setup.py test
A ZEO client can also be created by calling the ClientStorage
constructor explicitly. For example::
It will download dependencies if needed. If this happens, ou may get
an import error when the test command gets to looking for tests. Try
running the test command a second time and you should see the tests
run.
from ZEO.ClientStorage import ClientStorage
storage = ClientStorage(("zeo.example.com", 8090))
::
Running the ZEO server as a daemon
----------------------------------
python setup.py test
In an operational setting, you will want to run the ZEO server a
daemon process that is restarted when it dies. The zdaemon package
provides two tools for running daemons: zdrun.py and zdctl.py. You can
find zdaemon and it's documentation at
http://pypi.python.org/pypi/zdaemon.
Rotating log files
~~~~~~~~~~~~~~~~~~
ZEO will re-initialize its logging subsystem when it receives a
SIGUSR2 signal. If you are using the standard event logger, you
should first rename the log file and then send the signal to the
server. The server will continue writing to the renamed log file
until it receives the signal. After it receives the signal, the
server will create a new file with the old name and write to it.
Tools
-----
There are a few scripts that may help running a ZEO server. The
zeopack script connects to a server and packs the storage. It can
be run as a cron job. The zeopasswd.py script
manages a ZEO servers password database.
Diagnosing problems
-------------------
If an exception occurs on the server, the server will log a traceback
and send an exception to the client. The traceback on the client will
show a ZEO protocol library as the source of the error. If you need
to diagnose the problem, you will have to look in the server log for
the rest of the traceback.
Compatibility
=============
ZEO 4.0.0 requires Python 2.6 or later.
Note --
When using ZEO and upgrading from Python 2.4, you need to upgrade
clients and servers at the same time, or upgrade clients first and
then servers. Clients running Python 2.5 or 2.6 will work with
servers running Python 2.4. Clients running Python 2.4 won't work
properly with servers running Python 2.5 or later due to changes in
the way Python implements exceptions.
To install, use the install command::
For a long time ZEO has been distributes with ZODB. ZEO 4 is
is now maintained as a separate project.
python setup.py install
ZEO clients from ZODB 3.2 on can talk to ZEO 4.0 servers.
ZEO 4.0 clients talk to ZODB 3.8, 3.9, and 3.10 and ZEO 4.0 servers.
Note --
ZEO 4.0 servers don't support undo for clients older than ZODB 3.10.
Testing for Developers
======================
The ZODB checkouts are `buildouts <http://www.python.org/pypi/zc.buildout>`_.
The ZEO checkouts are `buildouts <http://www.python.org/pypi/zc.buildout>`_.
When working from a ZODB checkout, first run the bootstrap.py script
to initialize the buildout:
......@@ -117,77 +430,13 @@ Running all the tests takes much longer.::
OK
Maintenance scripts
-------------------
Several scripts are provided with the ZODB and can help for analyzing,
debugging, checking for consistency, summarizing content, reporting space used
by objects, doing backups, artificial load testing, etc.
Look at the ZODB/script directory for more informations.
History
=======
The historical version numbering schemes for ZODB and ZEO are complicated.
Starting with ZODB 3.4, the ZODB and ZEO version numbers are the same.
In the ZODB 3.1 through 3.3 lines, the ZEO version number was "one smaller"
than the ZODB version number; e.g., ZODB 3.2.7 included ZEO 2.2.7. ZODB and
ZEO were distinct releases prior to ZODB 3.1, and had independent version
numbers.
Historically, ZODB was distributed as a part of the Zope application
server. Jim Fulton's paper at the Python conference in 2000 described
a version of ZODB he called ZODB 3, based on an earlier persistent
object system called BoboPOS. The earliest versions of ZODB 3 were
released with Zope 2.0.
Andrew Kuchling extracted ZODB from Zope 2.4.1 and packaged it for
use by standalone Python programs. He called this version
"StandaloneZODB". Andrew's guide to using ZODB is included in the Doc
directory. This version of ZODB was hosted at
http://sf.net/projects/zodb. It supported Python 1.5.2, and might
still be of interest to users of this very old Python version.
Zope Corporation released a version of ZODB called "StandaloneZODB
1.0" in Feb. 2002. This release was based on Andrew's packaging, but
built from the same CVS repository as Zope. It is roughly equivalent
to the ZODB in Zope 2.5.
Why not call the current release StandaloneZODB? The name
StandaloneZODB is a bit of a mouthful. The standalone part of the
name suggests that the Zope version is the real version and that this
is an afterthought, which isn't the case. So we're calling this
release "ZODB". We also worked on a ZODB4 package for a while and
made a couple of alpha releases. We've now abandoned that effort,
because we didn't have the resources to pursue ot while also maintaining
ZODB(3).
License
=======
ZODB is distributed under the Zope Public License, an OSI-approved
open source license. Please see the LICENSE.txt file for terms and
conditions.
The ZODB/ZEO Programming Guide included in the documentation is a
modified version of Andrew Kuchling's original guide, provided under
the terms of the GNU Free Documentation License.
More information
================
We maintain a Wiki page about all things ZODB, including status on
future directions for ZODB. Please see
For more information on ZEO, see http://zodb.org
http://wiki.zope.org/ZODB/FrontPage
and feel free to contribute your comments. There is a Mailman mailing
list in place to discuss all issues related to ZODB. You can send
questions to
There is a Mailman mailing list in place to discuss all issues related
to ZODB, including ZEO. You can send questions to
zodb-dev@zope.org
......@@ -199,12 +448,7 @@ and view its archives at
http://lists.zope.org/pipermail/zodb-dev
Note that Zope Corp mailing lists have a subscriber-only posting policy.
Andrew's ZODB Programmers Guide is made available in several
forms, including DVI and HTML. To view it online, point your
browser at the file Doc/guide/zodb/index.html
Note that Zope mailing lists have a subscriber-only posting policy.
Bugs and Patches
================
......
doc/zeo.txt deleted 100644 → 0
View file @ fafc181d
==========================
Running a ZEO Server HOWTO
==========================
Introduction
------------
ZEO (Zope Enterprise Objects) is a client-server system for sharing a
single storage among many clients. Normally, a ZODB storage can only
be used by a single process. When you use ZEO, the storage is opened
in the ZEO server process. Client programs connect to this process
using a ZEO ClientStorage. ZEO provides a consistent view of the
database to all clients. The ZEO client and server communicate using
a custom RPC protocol layered on top of TCP.
There are several configuration options that affect the behavior of a
ZEO server. This section describes how a few of these features
working. Subsequent sections describe how to configure every option.
Client cache
~~~~~~~~~~~~
Each ZEO client keeps an on-disk cache of recently used objects to
avoid fetching those objects from the server each time they are
requested. It is usually faster to read the objects from disk than it
is to fetch them over the network. The cache can also provide
read-only copies of objects during server outages.
The cache may be persistent or transient. If the cache is persistent,
then the cache files are retained for use after process restarts. A
non-persistent cache uses temporary files that are removed when the
client storage is closed.
The client cache size is configured when the ClientStorage is created.
The default size is 20MB, but the right size depends entirely on the
particular database. Setting the cache size too small can hurt
performance, but in most cases making it too big just wastes disk
space. The document "Client cache tracing" describes how to collect a
cache trace that can be used to determine a good cache size.
ZEO uses invalidations for cache consistency. Every time an object is
modified, the server sends a message to each client informing it of
the change. The client will discard the object from its cache when it
receives an invalidation. These invalidations are often batched.
Each time a client connects to a server, it must verify that its cache
contents are still valid. (It did not receive any invalidation
messages while it was disconnected.) There are several mechanisms
used to perform cache verification. In the worst case, the client
sends the server a list of all objects in its cache along with their
timestamps; the server sends back an invalidation message for each
stale object. The cost of verification is one drawback to making the
cache too large.
Note that every time a client crashes or disconnects, it must verify
its cache. Every time a server crashes, all of its clients must
verify their caches.
The cache verification process is optimized in two ways to eliminate
costs when restarting clients and servers. Each client keeps the
timestamp of the last invalidation message it has seen. When it
connects to the server, it checks to see if any invalidation messages
were sent after that timestamp. If not, then the cache is up-to-date
and no further verification occurs. The other optimization is the
invalidation queue, described below.
Invalidation queue
~~~~~~~~~~~~~~~~~~
The ZEO server keeps a queue of recent invalidation messages in
memory. When a client connects to the server, it sends the timestamp
of the most recent invalidation message it has received. If that
message is still in the invalidation queue, then the server sends the
client all the missing invalidations. This is often cheaper than
perform full cache verification.
The default size of the invalidation queue is 100. If the
invalidation queue is larger, it will be more likely that a client
that reconnects will be able to verify its cache using the queue. On
the other hand, a large queue uses more memory on the server to store
the message. Invalidation messages tend to be small, perhaps a few
hundred bytes each on average; it depends on the number of objects
modified by a transaction.
Transaction timeouts
~~~~~~~~~~~~~~~~~~~~
A ZEO server can be configured to timeout a transaction if it takes
too long to complete. Only a single transaction can commit at a time;
so if one transaction takes too long, all other clients will be
delayed waiting for it. In the extreme, a client can hang during the
commit process. If the client hangs, the server will be unable to
commit other transactions until it restarts. A well-behaved client
will not hang, but the server can be configured with a transaction
timeout to guard against bugs that cause a client to hang.
If any transaction exceeds the timeout threshold, the client's
connection to the server will be closed and the transaction aborted.
Once the transaction is aborted, the server can start processing other
client's requests. Most transactions should take very little time to
commit. The timer begins for a transaction after all the data has
been sent to the server. At this point, the cost of commit should be
dominated by the cost of writing data to disk; it should be unusual
for a commit to take longer than 1 second. A transaction timeout of
30 seconds should tolerate heavy load and slow communications between
client and server, while guarding against hung servers.
When a transaction times out, the client can be left in an awkward
position. If the timeout occurs during the second phase of the two
phase commit, the client will log a panic message. This should only
cause problems if the client transaction involved multiple storages.
If it did, it is possible that some storages committed the client
changes and others did not.
Connection management
~~~~~~~~~~~~~~~~~~~~~
A ZEO client manages its connection to the ZEO server. If it loses
the connection, it attempts to reconnect. While
it is disconnected, it can satisfy some reads by using its cache.
The client can be configured to wait for a connection when it is created
or to return immediately and provide data from its persistent cache.
It usually simplifies programming to have the client wait for a
connection on startup.
When the client is disconnected, it polls periodically to see if the
server is available. The rate at which it polls is configurable.
The client can be configured with multiple server addresses. In this
case, it assumes that each server has identical content and will use
any server that is available. It is possible to configure the client
to accept a read-only connection to one of these servers if no
read-write connection is available. If it has a read-only connection,
it will continue to poll for a read-write connection. This feature
supports the Zope Replication Services product,
http://www.zope.com/Products/ZopeProducts/ZRS. In general, it could
be used to with a system that arranges to provide hot backups of
servers in the case of failure.
If a single address resolves to multiple IPv4 or IPv6 addresses,
the client will connect to an arbitrary of these addresses.
Authentication
~~~~~~~~~~~~~~
ZEO supports optional authentication of client and server using a
password scheme similar to HTTP digest authentication (RFC 2069). It
is a simple challenge-response protocol that does not send passwords
in the clear, but does not offer strong security. The RFC discusses
many of the limitations of this kind of protocol. Note that this
feature provides authentication only. It does not provide encryption
or confidentiality.
The challenge-response also produces a session key that is used to
generate message authentication codes for each ZEO message. This
should prevent session hijacking.
Guard the password database as if it contained plaintext passwords.
It stores the hash of a username and password. This does not expose
the plaintext password, but it is sensitive nonetheless. An attacker
with the hash can impersonate the real user. This is a limitation of
the simple digest scheme.
The authentication framework allows third-party developers to provide
new authentication modules.
Installing software
-------------------
ZEO is distributed as part of the ZODB3 package and with Zope,
starting with Zope 2.7. You can download it from
http://pypi.python.org/pypi/ZODB3.
Configuring server
------------------
The script runzeo.py runs the ZEO server. The server can be
configured using command-line arguments or a config file. This
document only describes the config file. Run runzeo.py
-h to see the list of command-line arguments.
The runzeo.py script imports the ZEO package. ZEO must either be
installed in Python's site-packages directory or be in a directory on
PYTHONPATH.
The configuration file specifies the underlying storage the server
uses, the address it binds, and a few other optional parameters.
An example is::
<zeo>
address zeo.example.com:8090
monitor-address zeo.example.com:8091
</zeo>
<filestorage 1>
path /var/tmp/Data.fs
</filestorage>
<eventlog>
<logfile>
path /var/tmp/zeo.log
format %(asctime)s %(message)s
</logfile>
</eventlog>
This file configures a server to use a FileStorage from
/var/tmp/Data.fs. The server listens on port 8090 of zeo.example.com.
It also starts a monitor server that lists in port 8091. The ZEO
server writes its log file to /var/tmp/zeo.log and uses a custom
format for each line. Assuming the example configuration it stored in
zeo.config, you can run a server by typing::
python /usr/local/bin/runzeo.py -C zeo.config
A configuration file consists of a <zeo> section and a storage
section, where the storage section can use any of the valid ZODB
storage types. It may also contain an eventlog configuration. See
the document "Configuring a ZODB database" for more information about
configuring storages and eventlogs.
The zeo section must list the address. All the other keys are
optional.
address
The address at which the server should listen. This can be in
the form 'host:port' to signify a TCP/IP connection or a
pathname string to signify a Unix domain socket connection (at
least one '/' is required). A hostname may be a DNS name or a
dotted IP address. If the hostname is omitted, the platform's
default behavior is used when binding the listening socket (''
is passed to socket.bind() as the hostname portion of the
address).
read-only
Flag indicating whether the server should operate in read-only
mode. Defaults to false. Note that even if the server is
operating in writable mode, individual storages may still be
read-only. But if the server is in read-only mode, no write
operations are allowed, even if the storages are writable. Note
that pack() is considered a read-only operation.
invalidation-queue-size
The storage server keeps a queue of the objects modified by the
last N transactions, where N == invalidation_queue_size. This
queue is used to speed client cache verification when a client
disconnects for a short period of time.
monitor-address
The address at which the monitor server should listen. If
specified, a monitor server is started. The monitor server
provides server statistics in a simple text format. This can
be in the form 'host:port' to signify a TCP/IP connection or a
pathname string to signify a Unix domain socket connection (at
least one '/' is required). A hostname may be a DNS name or a
dotted IP address. If the hostname is omitted, the platform's
default behavior is used when binding the listening socket (''
is passed to socket.bind() as the hostname portion of the
address).
transaction-timeout
The maximum amount of time to wait for a transaction to commit
after acquiring the storage lock, specified in seconds. If the
transaction takes too long, the client connection will be closed
and the transaction aborted.
authentication-protocol
The name of the protocol used for authentication. The
only protocol provided with ZEO is "digest," but extensions
may provide other protocols.
authentication-database
The path of the database containing authentication credentials.
authentication-realm
The authentication realm of the server. Some authentication
schemes use a realm to identify the logic set of usernames
that are accepted by this server.
Configuring clients
-------------------
The ZEO client can also be configured using ZConfig. The ZODB.config
module provides several function for opening a storage based on its
configuration.
- ZODB.config.storageFromString()
- ZODB.config.storageFromFile()
- ZODB.config.storageFromURL()
The ZEO client configuration requires the server address be
specified. Everything else is optional. An example configuration is::
<zeoclient>
server zeo.example.com:8090
</zeoclient>
The other configuration options are listed below.
storage
The name of the storage that the client wants to use. If the
ZEO server serves more than one storage, the client selects
the storage it wants to use by name. The default name is '1',
which is also the default name for the ZEO server.
cache-size
The maximum size of the client cache, in bytes.
name
The storage name. If unspecified, the address of the server
will be used as the name.
client
Enables persistent cache files. The string passed here is
used to construct the cache filenames. If it is not
specified, the client creates a temporary cache that will
only be used by the current object.
var
The directory where persistent cache files are stored. By
default cache files, if they are persistent, are stored in
the current directory.
min-disconnect-poll
The minimum delay in seconds between attempts to connect to
the server, in seconds. Defaults to 5 seconds.
max-disconnect-poll
The maximum delay in seconds between attempts to connect to
the server, in seconds. Defaults to 300 seconds.
wait
A boolean indicating whether the constructor should wait
for the client to connect to the server and verify the cache
before returning. The default is true.
read-only
A flag indicating whether this should be a read-only storage,
defaulting to false (i.e. writing is allowed by default).
read-only-fallback
A flag indicating whether a read-only remote storage should be
acceptable as a fallback when no writable storages are
available. Defaults to false. At most one of read_only and
read_only_fallback should be true.
realm
The authentication realm of the server. Some authentication
schemes use a realm to identify the logic set of usernames
that are accepted by this server.
A ZEO client can also be created by calling the ClientStorage
constructor explicitly. For example::
from ZEO.ClientStorage import ClientStorage
storage = ClientStorage(("zeo.example.com", 8090))
Running the ZEO server as a daemon
----------------------------------
In an operational setting, you will want to run the ZEO server a
daemon process that is restarted when it dies. The zdaemon package
provides two tools for running daemons: zdrun.py and zdctl.py. You can
find zdaemon and it's documentation at
http://pypi.python.org/pypi/zdaemon.
Rotating log files
~~~~~~~~~~~~~~~~~~
ZEO will re-initialize its logging subsystem when it receives a
SIGUSR2 signal. If you are using the standard event logger, you
should first rename the log file and then send the signal to the
server. The server will continue writing to the renamed log file
until it receives the signal. After it receives the signal, the
server will create a new file with the old name and write to it.
Tools
-----
There are a few scripts that may help running a ZEO server. The
zeopack.py script connects to a server and packs the storage. It can
be run as a cron job. The zeoup.py script attempts to connect to a
ZEO server and verify that is is functioning. The zeopasswd.py script
manages a ZEO servers password database.
Diagnosing problems
-------------------
If an exception occurs on the server, the server will log a traceback
and send an exception to the client. The traceback on the client will
show a ZEO protocol library as the source of the error. If you need
to diagnose the problem, you will have to look in the server log for
the rest of the traceback.
doc/zodb-guide.txt deleted 100644 → 0
View file @ fafc181d
The ZODB/ZEO Programming Guide has been moved into it's own package
(zodbguide) and published at http://docs.zope.org/zodb.
setup.py
View file @ d6a3eb79
......@@ -37,6 +37,12 @@ Operating System :: Unix
Framework :: ZODB
"""
def _modname(path, base, name=''):
if path == base:
return name
dirname, basename = os.path.split(path)
return _modname(dirname, base, basename + '.' + name)
def alltests():
import logging
import pkg_resources
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7