update install to use recipes

Conflicts:

	doc/installation.md
Signed-off-by: Nihad Abbasov <narkoz.2008@gmail.com>

doc/installation.md

@@ -48,9 +48,15 @@ Also read the [Read this before you submit an issue](https://github.com/gitlabhq
 >     apt-get install curl sudo
 >
 >     # 3 steps in 1 command :)
->     curl https://raw.github.com/gitlabhq/gitlabhq/master/doc/debian_ubuntu.sh | sh
+>     curl https://raw.github.com/gitlabhq/gitlab-recipes/master/install/debian_ubuntu.sh | sh
 >
-> Now you can go to step 4"
+> Now you can go to [Step 4](#4-install-gitlab-and-configuration-check-status-configuration)
+>
+> Or if you are installing on Amazon Web Services using Ubuntu 12.04 you can do all steps (1 to 6) at once with:
+>
+>     curl https://raw.github.com/gitlabhq/gitlab-recipes/master/install/debian_ubuntu_aws.sh | sh
+>
+> for more detailed instructions read the HOWTO section of [the script](https://github.com/gitlabhq/gitlab-recipes/blob/master/install/debian_ubuntu_aws.sh)
 > - - -
 
 # 1. Install packages
@@ -67,9 +73,9 @@ Also read the [Read this before you submit an issue](https://github.com/gitlabhq
 
 # 2. Install ruby
 
-    wget http://ftp.ruby-lang.org/pub/ruby/1.9/ruby-1.9.2-p290.tar.gz
-    tar xzfv ruby-1.9.2-p290.tar.gz
-    cd ruby-1.9.2-p290
+    wget http://ftp.ruby-lang.org/pub/ruby/1.9/ruby-1.9.3-p194.tar.gz
+    tar xfvz ruby-1.9.3-p194.tar.gz
+    cd ruby-1.9.3-p194
     ./configure
     make
     sudo make install
@@ -244,42 +250,15 @@ You can login via web using admin generated with setup:
     sudo -u gitlab cp config/unicorn.rb.orig config/unicorn.rb
     sudo -u gitlab bundle exec unicorn_rails -c config/unicorn.rb -E production -D
 
-Edit /etc/nginx/nginx.conf. In the *http* section add:
-
-    upstream gitlab {
-        server unix:/home/gitlab/gitlab/tmp/sockets/gitlab.socket;
-    }
-
-    server {
-        listen YOUR_SERVER_IP:80;         # e.g., listen 192.168.1.1:80;
-        server_name YOUR_SERVER_FQDN;     # e.g., server_name source.example.com;
-        root /home/gitlab/gitlab/public;
-        
-        # individual nginx logs for this gitlab vhost
-        access_log  /var/log/nginx/gitlab_access.log;
-        error_log   /var/log/nginx/gitlab_error.log;
-        
-        location / {
-            # serve static files from defined root folder;.
-            # @gitlab is a named location for the upstream fallback, see below
-            try_files $uri $uri/index.html $uri.html @gitlab;
-        }
-        
-        # if a file, which is not found in the root folder is requested, 
-        # then the proxy pass the request to the upsteam (gitlab unicorn)
-        location @gitlab {
-          proxy_redirect     off;
-          
-          # you need to change this to "https", if you set "ssl" directive to "on"
-          proxy_set_header   X-FORWARDED_PROTO http;
-          proxy_set_header   Host              $http_host;
-          proxy_set_header   X-Real-IP         $remote_addr;
+Add GitLab to nginx sites & change with your host specific settings
 
-          proxy_pass http://gitlab;
-        }
-    }
+    sudo wget https://raw.github.com/gitlabhq/gitlab-recipes/master/nginx/gitlab -P /etc/nginx/sites-available/
+    sudo ln -s /etc/nginx/sites-available/gitlab /etc/nginx/sites-enabled/gitlab
 
-Change **YOUR_SERVER_IP** and **YOUR_SERVER_FQDN** to the IP address and fully-qualified domain name of the host serving GitLab.
+    # Change **YOUR_SERVER_IP** and **YOUR_SERVER_FQDN**
+    # to the IP address and fully-qualified domain name
+    # of the host serving GitLab.
+    sudo vim /etc/nginx/sites-enabled/gitlab
 
 Restart nginx:
 
@@ -287,60 +266,7 @@ Restart nginx:
 
 Create init script in /etc/init.d/gitlab:
 
-    #! /bin/bash
-    ### BEGIN INIT INFO
-    # Provides:          gitlab
-    # Required-Start:    $local_fs $remote_fs $network $syslog redis-server
-    # Required-Stop:     $local_fs $remote_fs $network $syslog
-    # Default-Start:     2 3 4 5
-    # Default-Stop:      0 1 6
-    # Short-Description: GitLab git repository management
-    # Description:       GitLab git repository management
-    ### END INIT INFO
-    
-    DAEMON_OPTS="-c /home/gitlab/gitlab/config/unicorn.rb -E production -D"
-    NAME=unicorn
-    DESC="Gitlab service"
-    PID=/home/gitlab/gitlab/tmp/pids/unicorn.pid
-    RESQUE_PID=/home/gitlab/gitlab/tmp/pids/resque_worker.pid
-
-    case "$1" in
-      start)
-            CD_TO_APP_DIR="cd /home/gitlab/gitlab"
-            START_DAEMON_PROCESS="bundle exec unicorn_rails $DAEMON_OPTS"
-            START_RESQUE_PROCESS="./resque.sh"
-
-            echo -n "Starting $DESC: "
-            if [ `whoami` = root ]; then
-              sudo -u gitlab sh -l -c "$CD_TO_APP_DIR > /dev/null 2>&1 && $START_DAEMON_PROCESS && $START_RESQUE_PROCESS"
-            else
-              $CD_TO_APP_DIR > /dev/null 2>&1 && $START_DAEMON_PROCESS && $START_RESQUE_PROCESS
-            fi
-            echo "$NAME."
-            ;;
-      stop)
-            echo -n "Stopping $DESC: "
-            kill -QUIT `cat $PID`
-            kill -QUIT `cat $RESQUE_PID`
-            echo "$NAME."
-            ;;
-      restart)
-            echo -n "Restarting $DESC: "
-            kill -USR2 `cat $PID`
-            echo "$NAME."
-            ;;
-      reload)
-            echo -n "Reloading $DESC configuration: "
-            kill -HUP `cat $PID`
-            echo "$NAME."
-            ;;
-      *)
-            echo "Usage: $NAME {start|stop|restart|reload}" >&2
-            exit 1
-            ;;
-    esac
-
-    exit 0
+    sudo wget https://raw.github.com/gitlabhq/gitlab-recipes/master/init.d/gitlab -P /etc/init.d/
 
 Adding permission: