net: delay IP protocol stack-snooping system calls

This change delays IP protocol stack-snooping system calls until the
start of connection setup for the better experience with some system
call auditing, such as seccomp on Linux. See #16789 for examples.

Also updates the documentation on favoriteAddrFamily, which is the
owner of stack-snooping system calls.

Fixes #16789.

Change-Id: I4af27bc1ed06ffb1f657b6f6381c328c1f41c66c
Reviewed-on: https://go-review.googlesource.com/40750
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

src/net/dial_test.go

@@ -31,7 +31,7 @@ func TestProhibitionaryDialArg(t *testing.T) {
 	case "plan9":
 		t.Skipf("not supported on %s", runtime.GOOS)
 	}
-	if !supportsIPv4map {
+	if !supportsIPv4map() {
 		t.Skip("mapping ipv4 address inside ipv6 address not supported")
 	}
 
@@ -81,7 +81,7 @@ func TestDialerDualStackFDLeak(t *testing.T) {
 	case "openbsd":
 		testenv.SkipFlaky(t, 15157)
 	}
-	if !supportsIPv4 || !supportsIPv6 {
+	if !supportsIPv4() || !supportsIPv6() {
 		t.Skip("both IPv4 and IPv6 are required")
 	}
 
@@ -190,7 +190,7 @@ func dialClosedPort() (actual, expected time.Duration) {
 func TestDialParallel(t *testing.T) {
 	testenv.MustHaveExternalNetwork(t)
 
-	if !supportsIPv4 || !supportsIPv6 {
+	if !supportsIPv4() || !supportsIPv6() {
 		t.Skip("both IPv4 and IPv6 are required")
 	}
 
@@ -361,7 +361,7 @@ func lookupSlowFast(ctx context.Context, fn func(context.Context, string) ([]IPA
 func TestDialerFallbackDelay(t *testing.T) {
 	testenv.MustHaveExternalNetwork(t)
 
-	if !supportsIPv4 || !supportsIPv6 {
+	if !supportsIPv4() || !supportsIPv6() {
 		t.Skip("both IPv4 and IPv6 are required")
 	}
 
@@ -427,7 +427,7 @@ func TestDialerFallbackDelay(t *testing.T) {
 }
 
 func TestDialParallelSpuriousConnection(t *testing.T) {
-	if !supportsIPv4 || !supportsIPv6 {
+	if !supportsIPv4() || !supportsIPv6() {
 		t.Skip("both IPv4 and IPv6 are required")
 	}
 
@@ -536,7 +536,7 @@ func TestDialerPartialDeadline(t *testing.T) {
 }
 
 func TestDialerLocalAddr(t *testing.T) {
-	if !supportsIPv4 || !supportsIPv6 {
+	if !supportsIPv4() || !supportsIPv6() {
 		t.Skip("both IPv4 and IPv6 are required")
 	}
 
@@ -590,7 +590,7 @@ func TestDialerLocalAddr(t *testing.T) {
 		{"tcp", "::1", &UnixAddr{}, &AddrError{Err: "some error"}},
 	}
 
-	if supportsIPv4map {
+	if supportsIPv4map() {
 		tests = append(tests, test{
 			"tcp", "127.0.0.1", &TCPAddr{IP: ParseIP("::")}, nil,
 		})
@@ -652,7 +652,7 @@ func TestDialerLocalAddr(t *testing.T) {
 func TestDialerDualStack(t *testing.T) {
 	testenv.SkipFlaky(t, 13324)
 
-	if !supportsIPv4 || !supportsIPv6 {
+	if !supportsIPv4() || !supportsIPv6() {
 		t.Skip("both IPv4 and IPv6 are required")
 	}
 
@@ -755,7 +755,7 @@ func TestDialCancel(t *testing.T) {
 	}
 
 	blackholeIPPort := JoinHostPort(slowDst4, "1234")
-	if !supportsIPv4 {
+	if !supportsIPv4() {
 		blackholeIPPort = JoinHostPort(slowDst6, "1234")
 	}
 

src/net/error_test.go

@@ -214,7 +214,7 @@ func TestDialAddrError(t *testing.T) {
 	case "nacl", "plan9":
 		t.Skipf("not supported on %s", runtime.GOOS)
 	}
-	if !supportsIPv4 || !supportsIPv6 {
+	if !supportsIPv4() || !supportsIPv6() {
 		t.Skip("both IPv4 and IPv6 are required")
 	}
 

src/net/external_test.go

@@ -15,7 +15,7 @@ import (
 func TestResolveGoogle(t *testing.T) {
 	testenv.MustHaveExternalNetwork(t)
 
-	if !supportsIPv4 || !supportsIPv6 || !*testIPv4 || !*testIPv6 {
+	if !supportsIPv4() || !supportsIPv6() || !*testIPv4 || !*testIPv6 {
 		t.Skip("both IPv4 and IPv6 are required")
 	}
 
@@ -62,7 +62,7 @@ var dialGoogleTests = []struct {
 func TestDialGoogle(t *testing.T) {
 	testenv.MustHaveExternalNetwork(t)
 
-	if !supportsIPv4 || !supportsIPv6 || !*testIPv4 || !*testIPv6 {
+	if !supportsIPv4() || !supportsIPv6() || !*testIPv4 || !*testIPv6 {
 		t.Skip("both IPv4 and IPv6 are required")
 	}
 

src/net/fd_plan9.go

@@ -24,13 +24,7 @@ type netFD struct {
 	isStream          bool
 }
 
-var (
-	netdir string // default network
-)
-
-func sysInit() {
-	netdir = "/net"
-}
+var netdir = "/net" // default network
 
 func newFD(net, name string, listen, ctl, data *os.File, laddr, raddr Addr) (*netFD, error) {
 	ret := &netFD{

src/net/fd_unix.go

@@ -28,9 +28,6 @@ type netFD struct {
 	raddr       Addr
 }
 
-func sysInit() {
-}
-
 func newFD(sysfd, family, sotype int, net string) (*netFD, error) {
 	ret := &netFD{
 		pfd: poll.FD{

src/net/fd_windows.go

@@ -13,9 +13,6 @@ import (
 	"unsafe"
 )
 
-func sysInit() {
-}
-
 // canUseConnectEx reports whether we can use the ConnectEx Windows API call
 // for the given network type.
 func canUseConnectEx(net string) bool {

src/net/interface_test.go

@@ -262,13 +262,13 @@ func validateInterfaceMulticastAddrs(ifat []Addr) (*routeStats, error) {
 
 func checkUnicastStats(ifStats *ifStats, uniStats *routeStats) error {
 	// Test the existence of connected unicast routes for IPv4.
-	if supportsIPv4 && ifStats.loop+ifStats.other > 0 && uniStats.ipv4 == 0 {
+	if supportsIPv4() && ifStats.loop+ifStats.other > 0 && uniStats.ipv4 == 0 {
 		return fmt.Errorf("num IPv4 unicast routes = 0; want >0; summary: %+v, %+v", ifStats, uniStats)
 	}
 	// Test the existence of connected unicast routes for IPv6.
 	// We can assume the existence of ::1/128 when at least one
 	// loopback interface is installed.
-	if supportsIPv6 && ifStats.loop > 0 && uniStats.ipv6 == 0 {
+	if supportsIPv6() && ifStats.loop > 0 && uniStats.ipv6 == 0 {
 		return fmt.Errorf("num IPv6 unicast routes = 0; want >0; summary: %+v, %+v", ifStats, uniStats)
 	}
 	return nil
@@ -290,7 +290,7 @@ func checkMulticastStats(ifStats *ifStats, uniStats, multiStats *routeStats) err
 		// We can assume the existence of connected multicast
 		// route clones when at least two connected unicast
 		// routes, ::1/128 and other, are installed.
-		if supportsIPv6 && ifStats.loop > 0 && uniStats.ipv6 > 1 && multiStats.ipv6 == 0 {
+		if supportsIPv6() && ifStats.loop > 0 && uniStats.ipv6 > 1 && multiStats.ipv6 == 0 {
 			return fmt.Errorf("num IPv6 multicast route clones = 0; want >0; summary: %+v, %+v, %+v", ifStats, uniStats, multiStats)
 		}
 	}

src/net/ipsock.go

@@ -2,12 +2,11 @@
 // Use of this source code is governed by a BSD-style
 // license that can be found in the LICENSE file.
 
-// Internet protocol family sockets
-
 package net
 
 import (
 	"context"
+	"sync"
 )
 
 // BUG(rsc,mikio): On DragonFly BSD and OpenBSD, listening on the
@@ -17,20 +16,36 @@ import (
 // both address families are to be supported.
 // See inet6(4) for details.
 
-var (
-	// supportsIPv4 reports whether the platform supports IPv4
-	// networking functionality.
-	supportsIPv4 bool
+type ipStackCapabilities struct {
+	sync.Once             // guards following
+	ipv4Enabled           bool
+	ipv6Enabled           bool
+	ipv4MappedIPv6Enabled bool
+}
 
-	// supportsIPv6 reports whether the platform supports IPv6
-	// networking functionality.
-	supportsIPv6 bool
+var ipStackCaps ipStackCapabilities
 
-	// supportsIPv4map reports whether the platform supports
-	// mapping an IPv4 address inside an IPv6 address at transport
-	// layer protocols. See RFC 4291, RFC 4038 and RFC 3493.
-	supportsIPv4map bool
-)
+// supportsIPv4 reports whether the platform supports IPv4 networking
+// functionality.
+func supportsIPv4() bool {
+	ipStackCaps.Once.Do(ipStackCaps.probe)
+	return ipStackCaps.ipv4Enabled
+}
+
+// supportsIPv6 reports whether the platform supports IPv6 networking
+// functionality.
+func supportsIPv6() bool {
+	ipStackCaps.Once.Do(ipStackCaps.probe)
+	return ipStackCaps.ipv6Enabled
+}
+
+// supportsIPv4map reports whether the platform supports mapping an
+// IPv4 address inside an IPv6 address at transport layer
+// protocols. See RFC 4291, RFC 4038 and RFC 3493.
+func supportsIPv4map() bool {
+	ipStackCaps.Once.Do(ipStackCaps.probe)
+	return ipStackCaps.ipv4MappedIPv6Enabled
+}
 
 // An addrList represents a list of network endpoint addresses.
 type addrList []Addr

src/net/ipsock_plan9.go

@@ -2,8 +2,6 @@
 // Use of this source code is governed by a BSD-style
 // license that can be found in the LICENSE file.
 
-// Internet protocol family sockets for Plan 9
-
 package net
 
 import (
@@ -12,6 +10,18 @@ import (
 	"syscall"
 )
 
+// Probe probes IPv4, IPv6 and IPv4-mapped IPv6 communication
+// capabilities.
+//
+// Plan 9 uses IPv6 natively, see ip(3).
+func (p *ipStackCapabilities) probe() {
+	p.ipv4Enabled = probe(netdir+"/iproute", "4i")
+	p.ipv6Enabled = probe(netdir+"/iproute", "6i")
+	if p.ipv4Enabled && p.ipv6Enabled {
+		p.ipv4MappedIPv6Enabled = true
+	}
+}
+
 func probe(filename, query string) bool {
 	var file *file
 	var err error
@@ -36,23 +46,6 @@ func probe(filename, query string) bool {
 	return r
 }
 
-func probeIPv4Stack() bool {
-	return probe(netdir+"/iproute", "4i")
-}
-
-// probeIPv6Stack returns two boolean values. If the first boolean
-// value is true, kernel supports basic IPv6 functionality. If the
-// second boolean value is true, kernel supports IPv6 IPv4-mapping.
-func probeIPv6Stack() (supportsIPv6, supportsIPv4map bool) {
-	// Plan 9 uses IPv6 natively, see ip(3).
-	r := probe(netdir+"/iproute", "6i")
-	v := false
-	if r {
-		v = probe(netdir+"/iproute", "4i")
-	}
-	return r, v
-}
-
 // parsePlan9Addr parses address of the form [ip!]port (e.g. 127.0.0.1!80).
 func parsePlan9Addr(s string) (ip IP, iport int, err error) {
 	addr := IPv4zero // address contains port only

src/net/ipsock_posix.go

@@ -13,31 +13,24 @@ import (
 	"syscall"
 )
 
-func probeIPv4Stack() bool {
+// Probe probes IPv4, IPv6 and IPv4-mapped IPv6 communication
+// capabilities which are controlled by the IPV6_V6ONLY socket option
+// and kernel configuration.
+//
+// Should we try to use the IPv4 socket interface if we're only
+// dealing with IPv4 sockets? As long as the host system understands
+// IPv4-mapped IPv6, it's okay to pass IPv4-mapeed IPv6 addresses to
+// the IPv6 interface. That simplifies our code and is most
+// general. Unfortunately, we need to run on kernels built without
+// IPv6 support too. So probe the kernel to figure it out.
+func (p *ipStackCapabilities) probe() {
 	s, err := socketFunc(syscall.AF_INET, syscall.SOCK_STREAM, syscall.IPPROTO_TCP)
 	switch err {
 	case syscall.EAFNOSUPPORT, syscall.EPROTONOSUPPORT:
-		return false
 	case nil:
 		poll.CloseFunc(s)
+		p.ipv4Enabled = true
 	}
-	return true
-}
-
-// Should we try to use the IPv4 socket interface if we're
-// only dealing with IPv4 sockets?  As long as the host system
-// understands IPv6, it's okay to pass IPv4 addresses to the IPv6
-// interface. That simplifies our code and is most general.
-// Unfortunately, we need to run on kernels built without IPv6
-// support too. So probe the kernel to figure it out.
-//
-// probeIPv6Stack probes both basic IPv6 capability and IPv6 IPv4-
-// mapping capability which is controlled by IPV6_V6ONLY socket
-// option and/or kernel state "net.inet6.ip6.v6only".
-// It returns two boolean values. If the first boolean value is
-// true, kernel supports basic IPv6 functionality. If the second
-// boolean value is true, kernel supports IPv6 IPv4-mapping.
-func probeIPv6Stack() (supportsIPv6, supportsIPv4map bool) {
 	var probes = []struct {
 		laddr TCPAddr
 		value int
@@ -47,23 +40,13 @@ func probeIPv6Stack() (supportsIPv6, supportsIPv4map bool) {
 		// IPv4-mapped IPv6 address communication capability
 		{laddr: TCPAddr{IP: IPv4(127, 0, 0, 1)}, value: 0},
 	}
-	var supps [2]bool
 	switch runtime.GOOS {
 	case "dragonfly", "openbsd":
-		// Some released versions of DragonFly BSD pretend to
-		// accept IPV6_V6ONLY=0 successfully, but the state
-		// still stays IPV6_V6ONLY=1. Eventually DragonFly BSD
-		// stops pretending, but the transition period would
-		// cause unpredictable behavior and we need to avoid
-		// it.
-		//
-		// OpenBSD also doesn't support IPV6_V6ONLY=0 but it
-		// never pretends to accept IPV6_V6OLY=0. It always
-		// returns an error and we don't need to probe the
-		// capability.
+		// The latest DragonFly BSD and OpenBSD kernels don't
+		// support IPV6_V6ONLY=0. They always return an error
+		// and we don't need to probe the capability.
 		probes = probes[:1]
 	}
-
 	for i := range probes {
 		s, err := socketFunc(syscall.AF_INET6, syscall.SOCK_STREAM, syscall.IPPROTO_TCP)
 		if err != nil {
@@ -78,51 +61,55 @@ func probeIPv6Stack() (supportsIPv6, supportsIPv4map bool) {
 		if err := syscall.Bind(s, sa); err != nil {
 			continue
 		}
-		supps[i] = true
+		if i == 0 {
+			p.ipv6Enabled = true
+		} else {
+			p.ipv4MappedIPv6Enabled = true
+		}
 	}
-
-	return supps[0], supps[1]
 }
 
-// favoriteAddrFamily returns the appropriate address family to
-// the given net, laddr, raddr and mode. At first it figures
-// address family out from the net. If mode indicates "listen"
-// and laddr is a wildcard, it assumes that the user wants to
-// make a passive connection with a wildcard address family, both
-// AF_INET and AF_INET6, and a wildcard address like following:
+// favoriteAddrFamily returns the appropriate address family for the
+// given network, laddr, raddr and mode.
+//
+// If mode indicates "listen" and laddr is a wildcard, we assume that
+// the user wants to make a passive-open connection with a wildcard
+// address family, both AF_INET and AF_INET6, and a wildcard address
+// like the following:
 //
-//	1. A wild-wild listen, "tcp" + ""
-//	If the platform supports both IPv6 and IPv6 IPv4-mapping
-//	capabilities, or does not support IPv4, we assume that
-//	the user wants to listen on both IPv4 and IPv6 wildcard
-//	addresses over an AF_INET6 socket with IPV6_V6ONLY=0.
-//	Otherwise we prefer an IPv4 wildcard address listen over
-//	an AF_INET socket.
+//	- A listen for a wildcard communication domain, "tcp" or
+//	  "udp", with a wildcard address: If the platform supports
+//	  both IPv6 and IPv4-mapped IPv6 communication capabilities,
+//	  or does not support IPv4, we use a dual stack, AF_INET6 and
+//	  IPV6_V6ONLY=0, wildcard address listen. The dual stack
+//	  wildcard address listen may fall back to an IPv6-only,
+//	  AF_INET6 and IPV6_V6ONLY=1, wildcard address listen.
+//	  Otherwise we prefer an IPv4-only, AF_INET, wildcard address
+//	  listen.
 //
-//	2. A wild-ipv4wild listen, "tcp" + "0.0.0.0"
-//	Same as 1.
+//	- A listen for a wildcard communication domain, "tcp" or
+//	  "udp", with an IPv4 wildcard address: same as above.
 //
-//	3. A wild-ipv6wild listen, "tcp" + "[::]"
-//	Almost same as 1 but we prefer an IPv6 wildcard address
-//	listen over an AF_INET6 socket with IPV6_V6ONLY=0 when
-//	the platform supports IPv6 capability but not IPv6 IPv4-
-//	mapping capability.
+//	- A listen for a wildcard communication domain, "tcp" or
+//	  "udp", with an IPv6 wildcard address: same as above.
 //
-//	4. A ipv4-ipv4wild listen, "tcp4" + "" or "0.0.0.0"
-//	We use an IPv4 (AF_INET) wildcard address listen.
+//	- A listen for an IPv4 communication domain, "tcp4" or "udp4",
+//	  with an IPv4 wildcard address: We use an IPv4-only, AF_INET,
+//	  wildcard address listen.
 //
-//	5. A ipv6-ipv6wild listen, "tcp6" + "" or "[::]"
-//	We use an IPv6 (AF_INET6, IPV6_V6ONLY=1) wildcard address
-//	listen.
+//	- A listen for an IPv6 communication domain, "tcp6" or "udp6",
+//	  with an IPv6 wildcard address: We use an IPv6-only, AF_INET6
+//	  and IPV6_V6ONLY=1, wildcard address listen.
 //
-// Otherwise guess: if the addresses are IPv4 then returns AF_INET,
-// or else returns AF_INET6.  It also returns a boolean value what
+// Otherwise guess: If the addresses are IPv4 then returns AF_INET,
+// or else returns AF_INET6. It also returns a boolean value what
 // designates IPV6_V6ONLY option.
 //
-// Note that OpenBSD allows neither "net.inet6.ip6.v6only=1" change
-// nor IPPROTO_IPV6 level IPV6_V6ONLY socket option setting.
-func favoriteAddrFamily(net string, laddr, raddr sockaddr, mode string) (family int, ipv6only bool) {
-	switch net[len(net)-1] {
+// Note that the latest DragonFly BSD and OpenBSD kernels allow
+// neither "net.inet6.ip6.v6only=1" change nor IPPROTO_IPV6 level
+// IPV6_V6ONLY socket option setting.
+func favoriteAddrFamily(network string, laddr, raddr sockaddr, mode string) (family int, ipv6only bool) {
+	switch network[len(network)-1] {
 	case '4':
 		return syscall.AF_INET, false
 	case '6':
@@ -130,7 +117,7 @@ func favoriteAddrFamily(net string, laddr, raddr sockaddr, mode string) (family
 	}
 
 	if mode == "listen" && (laddr == nil || laddr.isWildcard()) {
-		if supportsIPv4map || !supportsIPv4 {
+		if supportsIPv4map() || !supportsIPv4() {
 			return syscall.AF_INET6, false
 		}
 		if laddr == nil {
@@ -146,7 +133,6 @@ func favoriteAddrFamily(net string, laddr, raddr sockaddr, mode string) (family
 	return syscall.AF_INET6, false
 }
 
-// Internet sockets (TCP, UDP, IP)
 func internetSocket(ctx context.Context, net string, laddr, raddr sockaddr, sotype, proto int, mode string) (fd *netFD, err error) {
 	if (runtime.GOOS == "windows" || runtime.GOOS == "openbsd" || runtime.GOOS == "nacl") && mode == "dial" && raddr.isWildcard() {
 		raddr = raddr.toLocal(net)

src/net/ipsock_test.go

@@ -215,7 +215,7 @@ var addrListTests = []struct {
 }
 
 func TestAddrList(t *testing.T) {
-	if !supportsIPv4 || !supportsIPv6 {
+	if !supportsIPv4() || !supportsIPv6() {
 		t.Skip("both IPv4 and IPv6 are required")
 	}
 

src/net/listen_test.go

@@ -225,7 +225,7 @@ func TestDualStackTCPListener(t *testing.T) {
 	case "nacl", "plan9":
 		t.Skipf("not supported on %s", runtime.GOOS)
 	}
-	if !supportsIPv4 || !supportsIPv6 {
+	if !supportsIPv4() || !supportsIPv6() {
 		t.Skip("both IPv4 and IPv6 are required")
 	}
 
@@ -235,7 +235,7 @@ func TestDualStackTCPListener(t *testing.T) {
 			continue
 		}
 
-		if !supportsIPv4map && differentWildcardAddr(tt.address1, tt.address2) {
+		if !supportsIPv4map() && differentWildcardAddr(tt.address1, tt.address2) {
 			tt.xerr = nil
 		}
 		var firstErr, secondErr error
@@ -315,7 +315,7 @@ func TestDualStackUDPListener(t *testing.T) {
 	case "nacl", "plan9":
 		t.Skipf("not supported on %s", runtime.GOOS)
 	}
-	if !supportsIPv4 || !supportsIPv6 {
+	if !supportsIPv4() || !supportsIPv6() {
 		t.Skip("both IPv4 and IPv6 are required")
 	}
 
@@ -325,7 +325,7 @@ func TestDualStackUDPListener(t *testing.T) {
 			continue
 		}
 
-		if !supportsIPv4map && differentWildcardAddr(tt.address1, tt.address2) {
+		if !supportsIPv4map() && differentWildcardAddr(tt.address1, tt.address2) {
 			tt.xerr = nil
 		}
 		var firstErr, secondErr error
@@ -454,7 +454,7 @@ func checkDualStackAddrFamily(fd *netFD) error {
 		// and IPv6 IPv4-mapping capability, we can assume
 		// that the node listens on a wildcard address with an
 		// AF_INET6 socket.
-		if supportsIPv4map && fd.laddr.(*TCPAddr).isWildcard() {
+		if supportsIPv4map() && fd.laddr.(*TCPAddr).isWildcard() {
 			if fd.family != syscall.AF_INET6 {
 				return fmt.Errorf("Listen(%s, %v) returns %v; want %v", fd.net, fd.laddr, fd.family, syscall.AF_INET6)
 			}
@@ -468,7 +468,7 @@ func checkDualStackAddrFamily(fd *netFD) error {
 		// and IPv6 IPv4-mapping capability, we can assume
 		// that the node listens on a wildcard address with an
 		// AF_INET6 socket.
-		if supportsIPv4map && fd.laddr.(*UDPAddr).isWildcard() {
+		if supportsIPv4map() && fd.laddr.(*UDPAddr).isWildcard() {
 			if fd.family != syscall.AF_INET6 {
 				return fmt.Errorf("ListenPacket(%s, %v) returns %v; want %v", fd.net, fd.laddr, fd.family, syscall.AF_INET6)
 			}
@@ -535,7 +535,7 @@ func TestIPv4MulticastListener(t *testing.T) {
 	case "solaris":
 		t.Skipf("not supported on solaris, see golang.org/issue/7399")
 	}
-	if !supportsIPv4 {
+	if !supportsIPv4() {
 		t.Skip("IPv4 is not supported")
 	}
 
@@ -610,7 +610,7 @@ func TestIPv6MulticastListener(t *testing.T) {
 	case "solaris":
 		t.Skipf("not supported on solaris, see issue 7399")
 	}
-	if !supportsIPv6 {
+	if !supportsIPv6() {
 		t.Skip("IPv6 is not supported")
 	}
 	if os.Getuid() != 0 {

src/net/lookup_test.go

@@ -63,7 +63,7 @@ func TestLookupGoogleSRV(t *testing.T) {
 		testenv.MustHaveExternalNetwork(t)
 	}
 
-	if !supportsIPv4 || !*testIPv4 {
+	if !supportsIPv4() || !*testIPv4 {
 		t.Skip("IPv4 is required")
 	}
 
@@ -99,7 +99,7 @@ func TestLookupGmailMX(t *testing.T) {
 		testenv.MustHaveExternalNetwork(t)
 	}
 
-	if !supportsIPv4 || !*testIPv4 {
+	if !supportsIPv4() || !*testIPv4 {
 		t.Skip("IPv4 is required")
 	}
 
@@ -131,7 +131,7 @@ func TestLookupGmailNS(t *testing.T) {
 		testenv.MustHaveExternalNetwork(t)
 	}
 
-	if !supportsIPv4 || !*testIPv4 {
+	if !supportsIPv4() || !*testIPv4 {
 		t.Skip("IPv4 is required")
 	}
 
@@ -164,7 +164,7 @@ func TestLookupGmailTXT(t *testing.T) {
 		testenv.MustHaveExternalNetwork(t)
 	}
 
-	if !supportsIPv4 || !*testIPv4 {
+	if !supportsIPv4() || !*testIPv4 {
 		t.Skip("IPv4 is required")
 	}
 
@@ -199,7 +199,7 @@ func TestLookupGooglePublicDNSAddr(t *testing.T) {
 		testenv.MustHaveExternalNetwork(t)
 	}
 
-	if !supportsIPv4 || !supportsIPv6 || !*testIPv4 || !*testIPv6 {
+	if !supportsIPv4() || !supportsIPv6() || !*testIPv4 || !*testIPv6 {
 		t.Skip("both IPv4 and IPv6 are required")
 	}
 
@@ -220,7 +220,7 @@ func TestLookupGooglePublicDNSAddr(t *testing.T) {
 }
 
 func TestLookupIPv6LinkLocalAddr(t *testing.T) {
-	if !supportsIPv6 || !*testIPv6 {
+	if !supportsIPv6() || !*testIPv6 {
 		t.Skip("IPv6 is required")
 	}
 
@@ -256,7 +256,7 @@ func TestLookupCNAME(t *testing.T) {
 		testenv.MustHaveExternalNetwork(t)
 	}
 
-	if !supportsIPv4 || !*testIPv4 {
+	if !supportsIPv4() || !*testIPv4 {
 		t.Skip("IPv4 is required")
 	}
 
@@ -283,7 +283,7 @@ func TestLookupGoogleHost(t *testing.T) {
 		testenv.MustHaveExternalNetwork(t)
 	}
 
-	if !supportsIPv4 || !*testIPv4 {
+	if !supportsIPv4() || !*testIPv4 {
 		t.Skip("IPv4 is required")
 	}
 
@@ -315,7 +315,7 @@ func TestLookupGoogleIP(t *testing.T) {
 		testenv.MustHaveExternalNetwork(t)
 	}
 
-	if !supportsIPv4 || !*testIPv4 {
+	if !supportsIPv4() || !*testIPv4 {
 		t.Skip("IPv4 is required")
 	}
 
@@ -450,7 +450,7 @@ func TestDNSFlood(t *testing.T) {
 }
 
 func TestLookupDotsWithLocalSource(t *testing.T) {
-	if !supportsIPv4 || !*testIPv4 {
+	if !supportsIPv4() || !*testIPv4 {
 		t.Skip("IPv4 is required")
 	}
 
@@ -499,7 +499,7 @@ func TestLookupDotsWithRemoteSource(t *testing.T) {
 		testenv.MustHaveExternalNetwork(t)
 	}
 
-	if !supportsIPv4 || !*testIPv4 {
+	if !supportsIPv4() || !*testIPv4 {
 		t.Skip("IPv4 is required")
 	}
 

src/net/main_test.go

@@ -70,7 +70,7 @@ var (
 )
 
 func setupTestData() {
-	if supportsIPv4 {
+	if supportsIPv4() {
 		resolveTCPAddrTests = append(resolveTCPAddrTests, []resolveTCPAddrTest{
 			{"tcp", "localhost:1", &TCPAddr{IP: IPv4(127, 0, 0, 1), Port: 1}, nil},
 			{"tcp4", "localhost:2", &TCPAddr{IP: IPv4(127, 0, 0, 1), Port: 2}, nil},
@@ -85,7 +85,7 @@ func setupTestData() {
 		}...)
 	}
 
-	if supportsIPv6 {
+	if supportsIPv6() {
 		resolveTCPAddrTests = append(resolveTCPAddrTests, resolveTCPAddrTest{"tcp6", "localhost:3", &TCPAddr{IP: IPv6loopback, Port: 3}, nil})
 		resolveUDPAddrTests = append(resolveUDPAddrTests, resolveUDPAddrTest{"udp6", "localhost:3", &UDPAddr{IP: IPv6loopback, Port: 3}, nil})
 		resolveIPAddrTests = append(resolveIPAddrTests, resolveIPAddrTest{"ip6", "localhost", &IPAddr{IP: IPv6loopback}, nil})

src/net/mockserver_test.go

@@ -31,20 +31,20 @@ func testUnixAddr() string {
 func newLocalListener(network string) (Listener, error) {
 	switch network {
 	case "tcp":
-		if supportsIPv4 {
+		if supportsIPv4() {
 			if ln, err := Listen("tcp4", "127.0.0.1:0"); err == nil {
 				return ln, nil
 			}
 		}
-		if supportsIPv6 {
+		if supportsIPv6() {
 			return Listen("tcp6", "[::1]:0")
 		}
 	case "tcp4":
-		if supportsIPv4 {
+		if supportsIPv4() {
 			return Listen("tcp4", "127.0.0.1:0")
 		}
 	case "tcp6":
-		if supportsIPv6 {
+		if supportsIPv6() {
 			return Listen("tcp6", "[::1]:0")
 		}
 	case "unix", "unixpacket":
@@ -333,18 +333,18 @@ func timeoutTransmitter(c Conn, d, min, max time.Duration, ch chan<- error) {
 func newLocalPacketListener(network string) (PacketConn, error) {
 	switch network {
 	case "udp":
-		if supportsIPv4 {
+		if supportsIPv4() {
 			return ListenPacket("udp4", "127.0.0.1:0")
 		}
-		if supportsIPv6 {
+		if supportsIPv6() {
 			return ListenPacket("udp6", "[::1]:0")
 		}
 	case "udp4":
-		if supportsIPv4 {
+		if supportsIPv4() {
 			return ListenPacket("udp4", "127.0.0.1:0")
 		}
 	case "udp6":
-		if supportsIPv6 {
+		if supportsIPv6() {
 			return ListenPacket("udp6", "[::1]:0")
 		}
 	case "unixgram":

src/net/net.go

@@ -96,12 +96,6 @@ var (
 	netCgo bool // set true in conf_netcgo.go for build tag "netcgo"
 )
 
-func init() {
-	sysInit()
-	supportsIPv4 = probeIPv4Stack()
-	supportsIPv6, supportsIPv4map = probeIPv6Stack()
-}
-
 // Addr represents a network end point address.
 //
 // The two methods Network and String conventionally return strings

src/net/platform_test.go

@@ -50,11 +50,11 @@ func testableNetwork(network string) bool {
 	}
 	switch ss[0] {
 	case "tcp4", "udp4", "ip4":
-		if !supportsIPv4 {
+		if !supportsIPv4() {
 			return false
 		}
 	case "tcp6", "udp6", "ip6":
-		if !supportsIPv6 {
+		if !supportsIPv6() {
 			return false
 		}
 	}
@@ -117,25 +117,25 @@ func testableListenArgs(network, address, client string) bool {
 
 	// Test functionality of IPv4 communication using AF_INET and
 	// IPv6 communication using AF_INET6 sockets.
-	if !supportsIPv4 && ip.To4() != nil {
+	if !supportsIPv4() && ip.To4() != nil {
 		return false
 	}
-	if !supportsIPv6 && ip.To16() != nil && ip.To4() == nil {
+	if !supportsIPv6() && ip.To16() != nil && ip.To4() == nil {
 		return false
 	}
 	cip := ParseIP(client)
 	if cip != nil {
-		if !supportsIPv4 && cip.To4() != nil {
+		if !supportsIPv4() && cip.To4() != nil {
 			return false
 		}
-		if !supportsIPv6 && cip.To16() != nil && cip.To4() == nil {
+		if !supportsIPv6() && cip.To16() != nil && cip.To4() == nil {
 			return false
 		}
 	}
 
 	// Test functionality of IPv4 communication using AF_INET6
 	// sockets.
-	if !supportsIPv4map && supportsIPv4 && (network == "tcp" || network == "udp" || network == "ip") && wildcard {
+	if !supportsIPv4map() && supportsIPv4() && (network == "tcp" || network == "udp" || network == "ip") && wildcard {
 		// At this point, we prefer IPv4 when ip is nil.
 		// See favoriteAddrFamily for further information.
 		if ip.To16() != nil && ip.To4() == nil && cip.To4() != nil { // a pair of IPv6 server and IPv4 client

src/net/sockopt_bsd.go

@@ -25,7 +25,7 @@ func setDefaultSockopts(s, family, sotype int, ipv6only bool) error {
 			syscall.SetsockoptInt(s, syscall.IPPROTO_IPV6, syscall.IPV6_PORTRANGE, syscall.IPV6_PORTRANGE_HIGH)
 		}
 	}
-	if supportsIPv4map && family == syscall.AF_INET6 && sotype != syscall.SOCK_RAW {
+	if supportsIPv4map() && family == syscall.AF_INET6 && sotype != syscall.SOCK_RAW {
 		// Allow both IP versions even if the OS default
 		// is otherwise. Note that some operating systems
 		// never admit this option.

src/net/tcpsock_test.go

@@ -32,28 +32,28 @@ func BenchmarkTCP4PersistentTimeout(b *testing.B) {
 }
 
 func BenchmarkTCP6OneShot(b *testing.B) {
-	if !supportsIPv6 {
+	if !supportsIPv6() {
 		b.Skip("ipv6 is not supported")
 	}
 	benchmarkTCP(b, false, false, "[::1]:0")
 }
 
 func BenchmarkTCP6OneShotTimeout(b *testing.B) {
-	if !supportsIPv6 {
+	if !supportsIPv6() {
 		b.Skip("ipv6 is not supported")
 	}
 	benchmarkTCP(b, false, true, "[::1]:0")
 }
 
 func BenchmarkTCP6Persistent(b *testing.B) {
-	if !supportsIPv6 {
+	if !supportsIPv6() {
 		b.Skip("ipv6 is not supported")
 	}
 	benchmarkTCP(b, true, false, "[::1]:0")
 }
 
 func BenchmarkTCP6PersistentTimeout(b *testing.B) {
-	if !supportsIPv6 {
+	if !supportsIPv6() {
 		b.Skip("ipv6 is not supported")
 	}
 	benchmarkTCP(b, true, true, "[::1]:0")
@@ -163,7 +163,7 @@ func BenchmarkTCP4ConcurrentReadWrite(b *testing.B) {
 }
 
 func BenchmarkTCP6ConcurrentReadWrite(b *testing.B) {
-	if !supportsIPv6 {
+	if !supportsIPv6() {
 		b.Skip("ipv6 is not supported")
 	}
 	benchmarkTCPConcurrentReadWrite(b, "[::1]:0")
@@ -372,7 +372,7 @@ func TestTCPListenerName(t *testing.T) {
 func TestIPv6LinkLocalUnicastTCP(t *testing.T) {
 	testenv.MustHaveExternalNetwork(t)
 
-	if !supportsIPv6 {
+	if !supportsIPv6() {
 		t.Skip("IPv6 is not supported")
 	}
 

src/net/udpsock_test.go

@@ -15,7 +15,7 @@ import (
 func BenchmarkUDP6LinkLocalUnicast(b *testing.B) {
 	testHookUninstaller.Do(uninstallTestHooks)
 
-	if !supportsIPv6 {
+	if !supportsIPv6() {
 		b.Skip("IPv6 is not supported")
 	}
 	ifi := loopbackInterface()
@@ -279,7 +279,7 @@ func TestUDPConnLocalAndRemoteNames(t *testing.T) {
 func TestIPv6LinkLocalUnicastUDP(t *testing.T) {
 	testenv.MustHaveExternalNetwork(t)
 
-	if !supportsIPv6 {
+	if !supportsIPv6() {
 		t.Skip("IPv6 is not supported")
 	}