runtime: use per-goroutine sequence numbers in tracer

Currently tracer uses global sequencer and it introduces
significant slowdown on parallel machines (up to 10x).
Replace the global sequencer with per-goroutine sequencer.

If we assign per-goroutine sequence numbers to only 3 types
of events (start, unblock and syscall exit), it is enough to
restore consistent partial ordering of all events. Even these
events don't need sequence numbers all the time (if goroutine
starts on the same P where it was unblocked, then start does
not need sequence number).
The burden of restoring the order is put on trace parser.
Details of the algorithm are described in the comments.

On http benchmark with GOMAXPROCS=48:
no tracing: 5026 ns/op
tracing: 27803 ns/op (+453%)
with this change: 6369 ns/op (+26%, mostly for traceback)

Also trace size is reduced by ~22%. Average event size before: 4.63
bytes/event, after: 3.62 bytes/event.

Besides running trace tests, I've also tested with manually broken
cputicks (random skew for each event, per-P skew and episodic random skew).
In all cases broken timestamps were detected and no test failures.

Change-Id: I078bde421ccc386a66f6c2051ab207bcd5613efa
Reviewed-on: https://go-review.googlesource.com/21512
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

src/internal/trace/order.go

+// Copyright 2016 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package trace
+
+import (
+	"fmt"
+	"sort"
+)
+
+type eventBatch struct {
+	events   []*Event
+	selected bool
+}
+
+type orderEvent struct {
+	ev    *Event
+	batch int
+	g     uint64
+	init  gState
+	next  gState
+}
+
+type gStatus int
+
+type gState struct {
+	seq    uint64
+	status gStatus
+}
+
+const (
+	gDead gStatus = iota
+	gRunnable
+	gRunning
+	gWaiting
+
+	unordered = ^uint64(0)
+	garbage   = ^uint64(0) - 1
+	noseq     = ^uint64(0)
+	seqinc    = ^uint64(0) - 1
+)
+
+// order1007 merges a set of per-P event batches into a single, consistent stream.
+// The high level idea is as follows. Events within an individual batch are in
+// correct order, because they are emitted by a single P. So we need to produce
+// a correct interleaving of the batches. To do this we take first unmerged event
+// from each batch (frontier). Then choose subset that is "ready" to be merged,
+// that is, events for which all dependencies are already merged. Then we choose
+// event with the lowest timestamp from the subset, merge it and repeat.
+// This approach ensures that we form a consistent stream even if timestamps are
+// incorrect (condition observed on some machines).
+func order1007(m map[int][]*Event) (events []*Event, err error) {
+	pending := 0
+	var batches []*eventBatch
+	for _, v := range m {
+		pending += len(v)
+		batches = append(batches, &eventBatch{v, false})
+	}
+	gs := make(map[uint64]gState)
+	var frontier []orderEvent
+	for ; pending != 0; pending-- {
+		for i, b := range batches {
+			if b.selected || len(b.events) == 0 {
+				continue
+			}
+			ev := b.events[0]
+			g, init, next := stateTransition(ev)
+			if !transitionReady(g, gs[g], init) {
+				continue
+			}
+			frontier = append(frontier, orderEvent{ev, i, g, init, next})
+			b.events = b.events[1:]
+			b.selected = true
+			// Get rid of "Local" events, they are intended merely for ordering.
+			switch ev.Type {
+			case EvGoStartLocal:
+				ev.Type = EvGoStart
+			case EvGoUnblockLocal:
+				ev.Type = EvGoUnblock
+			case EvGoSysExitLocal:
+				ev.Type = EvGoSysExit
+			}
+		}
+		if len(frontier) == 0 {
+			return nil, fmt.Errorf("no consistent ordering of events possible")
+		}
+		sort.Sort(orderEventList(frontier))
+		f := frontier[0]
+		frontier[0] = frontier[len(frontier)-1]
+		frontier = frontier[:len(frontier)-1]
+		events = append(events, f.ev)
+		transition(gs, f.g, f.init, f.next)
+		if !batches[f.batch].selected {
+			panic("frontier batch is not selected")
+		}
+		batches[f.batch].selected = false
+	}
+
+	// At this point we have a consistent stream of events.
+	// Make sure time stamps respect the ordering.
+	// The tests will skip (not fail) the test case if they see this error.
+	if !sort.IsSorted(eventList(events)) {
+		return nil, ErrTimeOrder
+	}
+
+	// The last part is giving correct timestamps to EvGoSysExit events.
+	// The problem with EvGoSysExit is that actual syscall exit timestamp (ev.Args[2])
+	// is potentially acquired long before event emission. So far we've used
+	// timestamp of event emission (ev.Ts).
+	// We could not set ev.Ts = ev.Args[2] earlier, because it would produce
+	// seemingly broken timestamps (misplaced event).
+	// We also can't simply update the timestamp and resort events, because
+	// if timestamps are broken we will misplace the event and later report
+	// logically broken trace (instead of reporting broken timestamps).
+	lastSysBlock := make(map[uint64]int64)
+	for _, ev := range events {
+		switch ev.Type {
+		case EvGoSysBlock, EvGoInSyscall:
+			lastSysBlock[ev.G] = ev.Ts
+		case EvGoSysExit:
+			ts := int64(ev.Args[2])
+			if ts == 0 {
+				continue
+			}
+			block := lastSysBlock[ev.G]
+			if block == 0 {
+				return nil, fmt.Errorf("stray syscall exit")
+			}
+			if ts < block {
+				return nil, ErrTimeOrder
+			}
+			ev.Ts = ts
+		}
+	}
+	sort.Sort(eventList(events))
+
+	return
+}
+
+// stateTransition returns goroutine state (sequence and status) when the event
+// becomes ready for merging (init) and the goroutine state after the event (next).
+func stateTransition(ev *Event) (g uint64, init, next gState) {
+	switch ev.Type {
+	case EvGoCreate:
+		g = ev.Args[0]
+		init = gState{0, gDead}
+		next = gState{1, gRunnable}
+	case EvGoWaiting, EvGoInSyscall:
+		g = ev.G
+		init = gState{1, gRunnable}
+		next = gState{2, gWaiting}
+	case EvGoStart:
+		g = ev.G
+		init = gState{ev.Args[1], gRunnable}
+		next = gState{ev.Args[1] + 1, gRunning}
+	case EvGoStartLocal:
+		// noseq means that this event is ready for merging as soon as
+		// frontier reaches it (EvGoStartLocal is emitted on the same P
+		// as the corresponding EvGoCreate/EvGoUnblock, and thus the latter
+		// is already merged).
+		// seqinc is a stub for cases when event increments g sequence,
+		// but since we don't know current seq we also don't know next seq.
+		g = ev.G
+		init = gState{noseq, gRunnable}
+		next = gState{seqinc, gRunning}
+	case EvGoBlock, EvGoBlockSend, EvGoBlockRecv, EvGoBlockSelect,
+		EvGoBlockSync, EvGoBlockCond, EvGoBlockNet, EvGoSleep, EvGoSysBlock:
+		g = ev.G
+		init = gState{noseq, gRunning}
+		next = gState{noseq, gWaiting}
+	case EvGoSched, EvGoPreempt:
+		g = ev.G
+		init = gState{noseq, gRunning}
+		next = gState{noseq, gRunnable}
+	case EvGoUnblock, EvGoSysExit:
+		g = ev.Args[0]
+		init = gState{ev.Args[1], gWaiting}
+		next = gState{ev.Args[1] + 1, gRunnable}
+	case EvGoUnblockLocal, EvGoSysExitLocal:
+		g = ev.Args[0]
+		init = gState{noseq, gWaiting}
+		next = gState{seqinc, gRunnable}
+	case EvGCStart:
+		g = garbage
+		init = gState{ev.Args[0], gDead}
+		next = gState{ev.Args[0] + 1, gDead}
+	default:
+		// no ordering requirements
+		g = unordered
+	}
+	return
+}
+
+func transitionReady(g uint64, curr, init gState) bool {
+	return g == unordered || (init.seq == noseq || init.seq == curr.seq) && init.status == curr.status
+}
+
+func transition(gs map[uint64]gState, g uint64, init, next gState) {
+	if g == unordered {
+		return
+	}
+	curr := gs[g]
+	if !transitionReady(g, curr, init) {
+		panic("event sequences are broken")
+	}
+	switch next.seq {
+	case noseq:
+		next.seq = curr.seq
+	case seqinc:
+		next.seq = curr.seq + 1
+	}
+	gs[g] = next
+}
+
+// order1005 merges a set of per-P event batches into a single, consistent stream.
+func order1005(m map[int][]*Event) (events []*Event, err error) {
+	for _, batch := range m {
+		events = append(events, batch...)
+	}
+	for _, ev := range events {
+		if ev.Type == EvGoSysExit {
+			// EvGoSysExit emission is delayed until the thread has a P.
+			// Give it the real sequence number and time stamp.
+			ev.seq = int64(ev.Args[1])
+			if ev.Args[2] != 0 {
+				ev.Ts = int64(ev.Args[2])
+			}
+		}
+	}
+	sort.Sort(eventSeqList(events))
+	if !sort.IsSorted(eventList(events)) {
+		return nil, ErrTimeOrder
+	}
+	return
+}
+
+type orderEventList []orderEvent
+
+func (l orderEventList) Len() int {
+	return len(l)
+}
+
+func (l orderEventList) Less(i, j int) bool {
+	return l[i].ev.Ts < l[j].ev.Ts
+}
+
+func (l orderEventList) Swap(i, j int) {
+	l[i], l[j] = l[j], l[i]
+}
+
+type eventList []*Event
+
+func (l eventList) Len() int {
+	return len(l)
+}
+
+func (l eventList) Less(i, j int) bool {
+	return l[i].Ts < l[j].Ts
+}
+
+func (l eventList) Swap(i, j int) {
+	l[i], l[j] = l[j], l[i]
+}
+
+type eventSeqList []*Event
+
+func (l eventSeqList) Len() int {
+	return len(l)
+}
+
+func (l eventSeqList) Less(i, j int) bool {
+	return l[i].seq < l[j].seq
+}
+
+func (l eventSeqList) Swap(i, j int) {
+	l[i], l[j] = l[j], l[i]
+}

src/internal/trace/parser.go

@@ -11,7 +11,6 @@ import (
 	"io"
 	"os"
 	"os/exec"
-	"sort"
 	"strconv"
 	"strings"
 )
@@ -135,7 +134,12 @@ func readTrace(r io.Reader) (ver int, events []rawEvent, strings map[uint64]stri
 		}
 		off += n
 		typ := buf[0] << 2 >> 2
-		narg := buf[0] >> 6
+		narg := buf[0]>>6 + 1
+		inlineArgs := byte(4)
+		if ver < 1007 {
+			narg++
+			inlineArgs++
+		}
 		if typ == EvNone || typ >= EvCount || EventDescriptions[typ].minVersion > ver {
 			err = fmt.Errorf("unknown event type %v at offset 0x%x", typ, off0)
 			return
@@ -180,8 +184,8 @@ func readTrace(r io.Reader) (ver int, events []rawEvent, strings map[uint64]stri
 			continue
 		}
 		ev := rawEvent{typ: typ, off: off0}
-		if narg < 3 {
-			for i := 0; i < int(narg)+2; i++ { // sequence number and time stamp are present but not counted in narg
+		if narg < inlineArgs {
+			for i := 0; i < int(narg); i++ {
 				var v uint64
 				v, off, err = readVal(r, off)
 				if err != nil {
@@ -191,7 +195,7 @@ func readTrace(r io.Reader) (ver int, events []rawEvent, strings map[uint64]stri
 				ev.args = append(ev.args, v)
 			}
 		} else {
-			// If narg == 3, the first value is length of the event in bytes.
+			// More than inlineArgs args, the first value is length of the event in bytes.
 			var v uint64
 			v, off, err = readVal(r, off)
 			if err != nil {
@@ -250,34 +254,30 @@ func parseEvents(ver int, rawEvents []rawEvent, strings map[uint64]string) (even
 	var lastP int
 	lastGs := make(map[int]uint64) // last goroutine running on P
 	stacks = make(map[uint64][]*Frame)
+	batches := make(map[int][]*Event) // events by P
 	for _, raw := range rawEvents {
 		desc := EventDescriptions[raw.typ]
 		if desc.Name == "" {
 			err = fmt.Errorf("missing description for event type %v", raw.typ)
 			return
 		}
-		if raw.typ != EvStack {
-			narg := len(desc.Args)
-			if desc.Stack {
-				narg++
-			}
-			if raw.typ != EvBatch && raw.typ != EvFrequency && raw.typ != EvTimerGoroutine {
-				narg++ // sequence number
-				narg++ // timestamp
-			}
-			if len(raw.args) != narg {
-				err = fmt.Errorf("%v has wrong number of arguments at offset 0x%x: want %v, got %v",
-					desc.Name, raw.off, narg, len(raw.args))
-				return
-			}
+		narg := argNum(raw, ver)
+		if len(raw.args) != narg {
+			err = fmt.Errorf("%v has wrong number of arguments at offset 0x%x: want %v, got %v",
+				desc.Name, raw.off, narg, len(raw.args))
+			return
 		}
 		switch raw.typ {
 		case EvBatch:
 			lastGs[lastP] = lastG
 			lastP = int(raw.args[0])
 			lastG = lastGs[lastP]
-			lastSeq = int64(raw.args[1])
-			lastTs = int64(raw.args[2])
+			if ver < 1007 {
+				lastSeq = int64(raw.args[1])
+				lastTs = int64(raw.args[2])
+			} else {
+				lastTs = int64(raw.args[1])
+			}
 		case EvFrequency:
 			ticksPerSec = int64(raw.args[0])
 			if ticksPerSec <= 0 {
@@ -328,18 +328,26 @@ func parseEvents(ver int, rawEvents []rawEvent, strings map[uint64]string) (even
 			}
 		default:
 			e := &Event{Off: raw.off, Type: raw.typ, P: lastP, G: lastG}
-			e.seq = lastSeq + int64(raw.args[0])
-			e.Ts = lastTs + int64(raw.args[1])
-			lastSeq = e.seq
-			lastTs = e.Ts
-			for i := range desc.Args {
-				e.Args[i] = raw.args[i+2]
+			var argOffset int
+			if ver < 1007 {
+				e.seq = lastSeq + int64(raw.args[0])
+				e.Ts = lastTs + int64(raw.args[1])
+				lastSeq = e.seq
+				argOffset = 2
+			} else {
+				e.Ts = lastTs + int64(raw.args[0])
+				argOffset = 1
 			}
-			if desc.Stack {
-				e.StkID = raw.args[len(desc.Args)+2]
+			lastTs = e.Ts
+			for i := argOffset; i < narg; i++ {
+				if i == narg-1 && desc.Stack {
+					e.StkID = raw.args[i]
+				} else {
+					e.Args[i-argOffset] = raw.args[i]
+				}
 			}
 			switch raw.typ {
-			case EvGoStart:
+			case EvGoStart, EvGoStartLocal:
 				lastG = e.Args[0]
 				e.G = lastG
 			case EvGCStart, EvGCDone, EvGCScanStart, EvGCScanDone:
@@ -349,28 +357,30 @@ func parseEvents(ver int, rawEvents []rawEvent, strings map[uint64]string) (even
 				EvGoBlockSelect, EvGoBlockSync, EvGoBlockCond, EvGoBlockNet,
 				EvGoSysBlock:
 				lastG = 0
-			case EvGoSysExit:
-				// EvGoSysExit emission is delayed until the thread has a P.
-				// Give it the real sequence number and time stamp.
-				e.seq = int64(e.Args[1])
-				if e.Args[2] != 0 {
-					e.Ts = int64(e.Args[2])
-				}
+			case EvGoSysExit, EvGoWaiting, EvGoInSyscall:
+				e.G = e.Args[0]
 			}
-			events = append(events, e)
+			batches[lastP] = append(batches[lastP], e)
 		}
 	}
-	if len(events) == 0 {
+	if len(batches) == 0 {
 		err = fmt.Errorf("trace is empty")
 		return
 	}
-
-	// Sort by sequence number and translate cpu ticks to real time.
-	sort.Sort(eventList(events))
 	if ticksPerSec == 0 {
 		err = fmt.Errorf("no EvFrequency event")
 		return
 	}
+	if ver < 1007 {
+		events, err = order1005(batches)
+	} else {
+		events, err = order1007(batches)
+	}
+	if err != nil {
+		return
+	}
+
+	// Translate cpu ticks to real time.
 	minTs := events[0].Ts
 	// Use floating point to avoid integer overflows.
 	freq := 1e9 / float64(ticksPerSec)
@@ -382,7 +392,6 @@ func parseEvents(ver int, rawEvents []rawEvent, strings map[uint64]string) (even
 		}
 		if ev.Type == EvGoSysExit {
 			ev.P = SyscallP
-			ev.G = ev.Args[0]
 		}
 	}
 
@@ -543,19 +552,15 @@ func postProcessTrace(ver int, events []*Event) error {
 			p.evSweep.Link = ev
 			p.evSweep = nil
 		case EvGoWaiting:
-			g1 := gs[ev.Args[0]]
-			if g1.state != gRunnable {
-				return fmt.Errorf("g %v is not runnable before EvGoWaiting (offset %v, time %v)", ev.Args[0], ev.Off, ev.Ts)
+			if g.state != gRunnable {
+				return fmt.Errorf("g %v is not runnable before EvGoWaiting (offset %v, time %v)", ev.G, ev.Off, ev.Ts)
 			}
-			g1.state = gWaiting
-			gs[ev.Args[0]] = g1
+			g.state = gWaiting
 		case EvGoInSyscall:
-			g1 := gs[ev.Args[0]]
-			if g1.state != gRunnable {
-				return fmt.Errorf("g %v is not runnable before EvGoInSyscall (offset %v, time %v)", ev.Args[0], ev.Off, ev.Ts)
+			if g.state != gRunnable {
+				return fmt.Errorf("g %v is not runnable before EvGoInSyscall (offset %v, time %v)", ev.G, ev.Off, ev.Ts)
 			}
-			g1.state = gWaiting
-			gs[ev.Args[0]] = g1
+			g.state = gWaiting
 		case EvGoCreate:
 			if err := checkRunning(p, g, ev, true); err != nil {
 				return err
@@ -666,18 +671,6 @@ func postProcessTrace(ver int, events []*Event) error {
 	// TODO(dvyukov): restore stacks for EvGoStart events.
 	// TODO(dvyukov): test that all EvGoStart events has non-nil Link.
 
-	// Last, after all the other consistency checks,
-	// make sure time stamps respect sequence numbers.
-	// The tests will skip (not fail) the test case if they see this error,
-	// so check everything else that could possibly be wrong first.
-	lastTs := int64(0)
-	for _, ev := range events {
-		if ev.Ts < lastTs {
-			return ErrTimeOrder
-		}
-		lastTs = ev.Ts
-	}
-
 	return nil
 }
 
@@ -773,30 +766,51 @@ func readVal(r io.Reader, off0 int) (v uint64, off int, err error) {
 	return 0, 0, fmt.Errorf("bad value at offset 0x%x", off0)
 }
 
-type eventList []*Event
-
-func (l eventList) Len() int {
-	return len(l)
-}
-
-func (l eventList) Less(i, j int) bool {
-	return l[i].seq < l[j].seq
+// Print dumps events to stdout. For debugging.
+func Print(events []*Event) {
+	for _, ev := range events {
+		PrintEvent(ev)
+	}
 }
 
-func (l eventList) Swap(i, j int) {
-	l[i], l[j] = l[j], l[i]
+// PrintEvent dumps the event to stdout. For debugging.
+func PrintEvent(ev *Event) {
+	desc := EventDescriptions[ev.Type]
+	fmt.Printf("%v %v p=%v g=%v off=%v", ev.Ts, desc.Name, ev.P, ev.G, ev.Off)
+	for i, a := range desc.Args {
+		fmt.Printf(" %v=%v", a, ev.Args[i])
+	}
+	fmt.Printf("\n")
 }
 
-// Print dumps events to stdout. For debugging.
-func Print(events []*Event) {
-	for _, ev := range events {
-		desc := EventDescriptions[ev.Type]
-		fmt.Printf("%v %v p=%v g=%v off=%v", ev.Ts, desc.Name, ev.P, ev.G, ev.Off)
-		for i, a := range desc.Args {
-			fmt.Printf(" %v=%v", a, ev.Args[i])
+// argNum returns total number of args for the event accounting for timestamps,
+// sequence numbers and differences between trace format versions.
+func argNum(raw rawEvent, ver int) int {
+	desc := EventDescriptions[raw.typ]
+	if raw.typ == EvStack {
+		return len(raw.args)
+	}
+	narg := len(desc.Args)
+	if desc.Stack {
+		narg++
+	}
+	switch raw.typ {
+	case EvBatch, EvFrequency, EvTimerGoroutine:
+		if ver < 1007 {
+			narg++ // there was an unused arg before 1.7
+		}
+	case EvGCStart, EvGoStart, EvGoUnblock:
+		if ver < 1007 {
+			narg-- // 1.7 added an additional seq arg
+		}
+		fallthrough
+	default:
+		narg++ // timestamp
+		if ver < 1007 {
+			narg++ // sequence
 		}
-		fmt.Printf("\n")
 	}
+	return narg
 }
 
 // Event types in the trace.
@@ -809,21 +823,21 @@ const (
 	EvGomaxprocs     = 4  // current value of GOMAXPROCS [timestamp, GOMAXPROCS, stack id]
 	EvProcStart      = 5  // start of P [timestamp, thread id]
 	EvProcStop       = 6  // stop of P [timestamp]
-	EvGCStart        = 7  // GC start [timestamp, stack id]
+	EvGCStart        = 7  // GC start [timestamp, seq, stack id]
 	EvGCDone         = 8  // GC done [timestamp]
 	EvGCScanStart    = 9  // GC scan start [timestamp]
 	EvGCScanDone     = 10 // GC scan done [timestamp]
 	EvGCSweepStart   = 11 // GC sweep start [timestamp, stack id]
 	EvGCSweepDone    = 12 // GC sweep done [timestamp]
 	EvGoCreate       = 13 // goroutine creation [timestamp, new goroutine id, new stack id, stack id]
-	EvGoStart        = 14 // goroutine starts running [timestamp, goroutine id]
+	EvGoStart        = 14 // goroutine starts running [timestamp, goroutine id, seq]
 	EvGoEnd          = 15 // goroutine ends [timestamp]
 	EvGoStop         = 16 // goroutine stops (like in select{}) [timestamp, stack]
 	EvGoSched        = 17 // goroutine calls Gosched [timestamp, stack]
 	EvGoPreempt      = 18 // goroutine is preempted [timestamp, stack]
 	EvGoSleep        = 19 // goroutine calls Sleep [timestamp, stack]
 	EvGoBlock        = 20 // goroutine blocks [timestamp, stack]
-	EvGoUnblock      = 21 // goroutine is unblocked [timestamp, goroutine id, stack]
+	EvGoUnblock      = 21 // goroutine is unblocked [timestamp, goroutine id, seq, stack]
 	EvGoBlockSend    = 22 // goroutine blocks on chan send [timestamp, stack]
 	EvGoBlockRecv    = 23 // goroutine blocks on chan recv [timestamp, stack]
 	EvGoBlockSelect  = 24 // goroutine blocks on select [timestamp, stack]
@@ -831,7 +845,7 @@ const (
 	EvGoBlockCond    = 26 // goroutine blocks on Cond [timestamp, stack]
 	EvGoBlockNet     = 27 // goroutine blocks on network [timestamp, stack]
 	EvGoSysCall      = 28 // syscall enter [timestamp, stack]
-	EvGoSysExit      = 29 // syscall exit [timestamp, goroutine id, real timestamp]
+	EvGoSysExit      = 29 // syscall exit [timestamp, goroutine id, seq, real timestamp]
 	EvGoSysBlock     = 30 // syscall blocks [timestamp]
 	EvGoWaiting      = 31 // denotes that goroutine is blocked when tracing starts [timestamp, goroutine id]
 	EvGoInSyscall    = 32 // denotes that goroutine is in syscall when tracing starts [timestamp, goroutine id]
@@ -840,7 +854,10 @@ const (
 	EvTimerGoroutine = 35 // denotes timer goroutine [timer goroutine id]
 	EvFutileWakeup   = 36 // denotes that the previous wakeup of this goroutine was futile [timestamp]
 	EvString         = 37 // string dictionary entry [ID, length, string]
-	EvCount          = 38
+	EvGoStartLocal   = 38 // goroutine starts running on the same P as the last event [timestamp, goroutine id]
+	EvGoUnblockLocal = 39 // goroutine is unblocked on the same P as the last event [timestamp, goroutine id, stack]
+	EvGoSysExitLocal = 40 // syscall exit on the same P as the last event [timestamp, goroutine id, real timestamp]
+	EvCount          = 41
 )
 
 var EventDescriptions = [EvCount]struct {
@@ -850,27 +867,27 @@ var EventDescriptions = [EvCount]struct {
 	Args       []string
 }{
 	EvNone:           {"None", 1005, false, []string{}},
-	EvBatch:          {"Batch", 1005, false, []string{"p", "seq", "ticks"}},
-	EvFrequency:      {"Frequency", 1005, false, []string{"freq", "unused"}},
+	EvBatch:          {"Batch", 1005, false, []string{"p", "ticks"}}, // in 1.5 format it was {"p", "seq", "ticks"}
+	EvFrequency:      {"Frequency", 1005, false, []string{"freq"}},   // in 1.5 format it was {"freq", "unused"}
 	EvStack:          {"Stack", 1005, false, []string{"id", "siz"}},
 	EvGomaxprocs:     {"Gomaxprocs", 1005, true, []string{"procs"}},
 	EvProcStart:      {"ProcStart", 1005, false, []string{"thread"}},
 	EvProcStop:       {"ProcStop", 1005, false, []string{}},
-	EvGCStart:        {"GCStart", 1005, true, []string{}},
+	EvGCStart:        {"GCStart", 1005, true, []string{"seq"}}, // in 1.5 format it was {}
 	EvGCDone:         {"GCDone", 1005, false, []string{}},
 	EvGCScanStart:    {"GCScanStart", 1005, false, []string{}},
 	EvGCScanDone:     {"GCScanDone", 1005, false, []string{}},
 	EvGCSweepStart:   {"GCSweepStart", 1005, true, []string{}},
 	EvGCSweepDone:    {"GCSweepDone", 1005, false, []string{}},
 	EvGoCreate:       {"GoCreate", 1005, true, []string{"g", "stack"}},
-	EvGoStart:        {"GoStart", 1005, false, []string{"g"}},
+	EvGoStart:        {"GoStart", 1005, false, []string{"g", "seq"}}, // in 1.5 format it was {"g"}
 	EvGoEnd:          {"GoEnd", 1005, false, []string{}},
 	EvGoStop:         {"GoStop", 1005, true, []string{}},
 	EvGoSched:        {"GoSched", 1005, true, []string{}},
 	EvGoPreempt:      {"GoPreempt", 1005, true, []string{}},
 	EvGoSleep:        {"GoSleep", 1005, true, []string{}},
 	EvGoBlock:        {"GoBlock", 1005, true, []string{}},
-	EvGoUnblock:      {"GoUnblock", 1005, true, []string{"g"}},
+	EvGoUnblock:      {"GoUnblock", 1005, true, []string{"g", "seq"}}, // in 1.5 format it was {"g"}
 	EvGoBlockSend:    {"GoBlockSend", 1005, true, []string{}},
 	EvGoBlockRecv:    {"GoBlockRecv", 1005, true, []string{}},
 	EvGoBlockSelect:  {"GoBlockSelect", 1005, true, []string{}},
@@ -884,7 +901,10 @@ var EventDescriptions = [EvCount]struct {
 	EvGoInSyscall:    {"GoInSyscall", 1005, false, []string{"g"}},
 	EvHeapAlloc:      {"HeapAlloc", 1005, false, []string{"mem"}},
 	EvNextGC:         {"NextGC", 1005, false, []string{"mem"}},
-	EvTimerGoroutine: {"TimerGoroutine", 1005, false, []string{"g", "unused"}},
+	EvTimerGoroutine: {"TimerGoroutine", 1005, false, []string{"g"}}, // in 1.5 format it was {"g", "unused"}
 	EvFutileWakeup:   {"FutileWakeup", 1005, false, []string{}},
 	EvString:         {"String", 1007, false, []string{}},
+	EvGoStartLocal:   {"GoStartLocal", 1007, false, []string{"g"}},
+	EvGoUnblockLocal: {"GoUnblockLocal", 1007, true, []string{"g"}},
+	EvGoSysExitLocal: {"GoSysExitLocal", 1007, false, []string{"g", "ts"}},
 }

src/internal/trace/parser_test.go

@@ -89,10 +89,10 @@ func TestParseVersion(t *testing.T) {
 func TestTimestampOverflow(t *testing.T) {
 	// Test that parser correctly handles large timestamps (long tracing).
 	w := newWriter()
-	w.emit(EvBatch, 0, 0, 0)
-	w.emit(EvFrequency, 1e9, 0)
+	w.emit(EvBatch, 0, 0)
+	w.emit(EvFrequency, 1e9)
 	for ts := uint64(1); ts < 1e16; ts *= 2 {
-		w.emit(EvGoCreate, 1, ts, ts, 1, 0)
+		w.emit(EvGoCreate, ts, ts, 0, 0)
 	}
 	if _, err := Parse(w, ""); err != nil {
 		t.Fatalf("failed to parse: %v", err)
@@ -110,7 +110,7 @@ func newWriter() *writer {
 }
 
 func (w *writer) emit(typ byte, args ...uint64) {
-	nargs := byte(len(args)) - 2
+	nargs := byte(len(args)) - 1
 	if nargs > 3 {
 		nargs = 3
 	}

src/runtime/proc.go

@@ -1796,23 +1796,7 @@ func execute(gp *g, inheritTime bool) {
 		// GoSysExit has to happen when we have a P, but before GoStart.
 		// So we emit it here.
 		if gp.syscallsp != 0 && gp.sysblocktraced {
-			// Since gp.sysblocktraced is true, we must emit an event.
-			// There is a race between the code that initializes sysexitseq
-			// and sysexitticks (in exitsyscall, which runs without a P,
-			// and therefore is not stopped with the rest of the world)
-			// and the code that initializes a new trace.
-			// The recorded sysexitseq and sysexitticks must therefore
-			// be treated as "best effort". If they are valid for this trace,
-			// then great, use them for greater accuracy.
-			// But if they're not valid for this trace, assume that the
-			// trace was started after the actual syscall exit (but before
-			// we actually managed to start the goroutine, aka right now),
-			// and assign a fresh time stamp to keep the log consistent.
-			seq, ts := gp.sysexitseq, gp.sysexitticks
-			if seq == 0 || int64(seq)-int64(trace.seqStart) < 0 {
-				seq, ts = tracestamp()
-			}
-			traceGoSysExit(seq, ts)
+			traceGoSysExit(gp.sysexitticks)
 		}
 		traceGoStart()
 	}
@@ -2481,7 +2465,6 @@ func exitsyscall(dummy int32) {
 	}
 
 	_g_.sysexitticks = 0
-	_g_.sysexitseq = 0
 	if trace.enabled {
 		// Wait till traceGoSysBlock event is emitted.
 		// This ensures consistency of the trace (the goroutine is started after it is blocked).
@@ -2492,7 +2475,7 @@ func exitsyscall(dummy int32) {
 		// Tracing code can invoke write barriers that cannot run without a P.
 		// So instead we remember the syscall exit time and emit the event
 		// in execute when we have a P.
-		_g_.sysexitseq, _g_.sysexitticks = tracestamp()
+		_g_.sysexitticks = cputicks()
 	}
 
 	_g_.m.locks--
@@ -2540,7 +2523,7 @@ func exitsyscallfast() bool {
 					// Denote blocking of the new syscall.
 					traceGoSysBlock(_g_.m.p.ptr())
 					// Denote completion of the current syscall.
-					traceGoSysExit(tracestamp())
+					traceGoSysExit(0)
 				})
 			}
 			_g_.m.p.ptr().syscalltick++
@@ -2564,7 +2547,7 @@ func exitsyscallfast() bool {
 						osyield()
 					}
 				}
-				traceGoSysExit(tracestamp())
+				traceGoSysExit(0)
 			}
 		})
 		if ok {

src/runtime/runtime2.go

@@ -332,16 +332,17 @@ type g struct {
 	waitsince      int64  // approx time when the g become blocked
 	waitreason     string // if status==Gwaiting
 	schedlink      guintptr
-	preempt        bool   // preemption signal, duplicates stackguard0 = stackpreempt
-	paniconfault   bool   // panic (instead of crash) on unexpected fault address
-	preemptscan    bool   // preempted g does scan for gc
-	gcscandone     bool   // g has scanned stack; protected by _Gscan bit in status
-	gcscanvalid    bool   // false at start of gc cycle, true if G has not run since last scan
-	throwsplit     bool   // must not split stack
-	raceignore     int8   // ignore race detection events
-	sysblocktraced bool   // StartTrace has emitted EvGoInSyscall about this goroutine
-	sysexitticks   int64  // cputicks when syscall has returned (for tracing)
-	sysexitseq     uint64 // trace seq when syscall has returned (for tracing)
+	preempt        bool     // preemption signal, duplicates stackguard0 = stackpreempt
+	paniconfault   bool     // panic (instead of crash) on unexpected fault address
+	preemptscan    bool     // preempted g does scan for gc
+	gcscandone     bool     // g has scanned stack; protected by _Gscan bit in status
+	gcscanvalid    bool     // false at start of gc cycle, true if G has not run since last scan
+	throwsplit     bool     // must not split stack
+	raceignore     int8     // ignore race detection events
+	sysblocktraced bool     // StartTrace has emitted EvGoInSyscall about this goroutine
+	sysexitticks   int64    // cputicks when syscall has returned (for tracing)
+	traceseq       uint64   // trace event sequencer
+	tracelastp     puintptr // last P emitted an event for this goroutine
 	lockedm        *m
 	sig            uint32
 	writebuf       []byte

src/runtime/trace.go

@@ -13,7 +13,6 @@
 package runtime
 
 import (
-	"runtime/internal/atomic"
 	"runtime/internal/sys"
 	"unsafe"
 )
@@ -27,21 +26,21 @@ const (
 	traceEvGomaxprocs     = 4  // current value of GOMAXPROCS [timestamp, GOMAXPROCS, stack id]
 	traceEvProcStart      = 5  // start of P [timestamp, thread id]
 	traceEvProcStop       = 6  // stop of P [timestamp]
-	traceEvGCStart        = 7  // GC start [timestamp, stack id]
+	traceEvGCStart        = 7  // GC start [timestamp, seq, stack id]
 	traceEvGCDone         = 8  // GC done [timestamp]
 	traceEvGCScanStart    = 9  // GC scan start [timestamp]
 	traceEvGCScanDone     = 10 // GC scan done [timestamp]
 	traceEvGCSweepStart   = 11 // GC sweep start [timestamp, stack id]
 	traceEvGCSweepDone    = 12 // GC sweep done [timestamp]
 	traceEvGoCreate       = 13 // goroutine creation [timestamp, new goroutine id, new stack id, stack id]
-	traceEvGoStart        = 14 // goroutine starts running [timestamp, goroutine id]
+	traceEvGoStart        = 14 // goroutine starts running [timestamp, goroutine id, seq]
 	traceEvGoEnd          = 15 // goroutine ends [timestamp]
 	traceEvGoStop         = 16 // goroutine stops (like in select{}) [timestamp, stack]
 	traceEvGoSched        = 17 // goroutine calls Gosched [timestamp, stack]
 	traceEvGoPreempt      = 18 // goroutine is preempted [timestamp, stack]
 	traceEvGoSleep        = 19 // goroutine calls Sleep [timestamp, stack]
 	traceEvGoBlock        = 20 // goroutine blocks [timestamp, stack]
-	traceEvGoUnblock      = 21 // goroutine is unblocked [timestamp, goroutine id, stack]
+	traceEvGoUnblock      = 21 // goroutine is unblocked [timestamp, goroutine id, seq, stack]
 	traceEvGoBlockSend    = 22 // goroutine blocks on chan send [timestamp, stack]
 	traceEvGoBlockRecv    = 23 // goroutine blocks on chan recv [timestamp, stack]
 	traceEvGoBlockSelect  = 24 // goroutine blocks on select [timestamp, stack]
@@ -49,7 +48,7 @@ const (
 	traceEvGoBlockCond    = 26 // goroutine blocks on Cond [timestamp, stack]
 	traceEvGoBlockNet     = 27 // goroutine blocks on network [timestamp, stack]
 	traceEvGoSysCall      = 28 // syscall enter [timestamp, stack]
-	traceEvGoSysExit      = 29 // syscall exit [timestamp, goroutine id, real timestamp]
+	traceEvGoSysExit      = 29 // syscall exit [timestamp, goroutine id, seq, real timestamp]
 	traceEvGoSysBlock     = 30 // syscall blocks [timestamp]
 	traceEvGoWaiting      = 31 // denotes that goroutine is blocked when tracing starts [timestamp, goroutine id]
 	traceEvGoInSyscall    = 32 // denotes that goroutine is in syscall when tracing starts [timestamp, goroutine id]
@@ -58,7 +57,10 @@ const (
 	traceEvTimerGoroutine = 35 // denotes timer goroutine [timer goroutine id]
 	traceEvFutileWakeup   = 36 // denotes that the previous wakeup of this goroutine was futile [timestamp]
 	traceEvString         = 37 // string dictionary entry [ID, length, string]
-	traceEvCount          = 38
+	traceEvGoStartLocal   = 38 // goroutine starts running on the same P as the last event [timestamp, goroutine id]
+	traceEvGoUnblockLocal = 39 // goroutine is unblocked on the same P as the last event [timestamp, goroutine id, stack]
+	traceEvGoSysExitLocal = 40 // syscall exit on the same P as the last event [timestamp, goroutine id, real timestamp]
+	traceEvCount          = 41
 )
 
 const (
@@ -105,6 +107,7 @@ var trace struct {
 	ticksEnd      int64       // cputicks when tracing was stopped
 	timeStart     int64       // nanotime when tracing was started
 	timeEnd       int64       // nanotime when tracing was stopped
+	seqGC         uint64      // GC start/done sequencer
 	reading       traceBufPtr // buffer currently handed off to user
 	empty         traceBufPtr // stack of empty buffers
 	fullHead      traceBufPtr // queue of full buffers
@@ -122,31 +125,9 @@ var trace struct {
 	buf     traceBufPtr // global trace buffer, used when running without a p
 }
 
-var traceseq uint64 // global trace sequence number
-
-// tracestamp returns a consistent sequence number, time stamp pair
-// for use in a trace. We need to make sure that time stamp ordering
-// (assuming synchronized CPUs) and sequence ordering match.
-// To do that, we increment traceseq, grab ticks, and increment traceseq again.
-// We treat odd traceseq as a sign that another thread is in the middle
-// of the sequence and spin until it is done.
-// Not splitting stack to avoid preemption, just in case the call sites
-// that used to call xadd64 and cputicks are sensitive to that.
-//go:nosplit
-func tracestamp() (seq uint64, ts int64) {
-	seq = atomic.Load64(&traceseq)
-	for seq&1 != 0 || !atomic.Cas64(&traceseq, seq, seq+1) {
-		seq = atomic.Load64(&traceseq)
-	}
-	ts = cputicks()
-	atomic.Store64(&traceseq, seq+2)
-	return seq >> 1, ts
-}
-
 // traceBufHeader is per-P tracing buffer.
 type traceBufHeader struct {
 	link      traceBufPtr             // in trace.empty/full
-	lastSeq   uint64                  // sequence number of last event
 	lastTicks uint64                  // when we wrote the last event
 	pos       int                     // next write offset in arr
 	stk       [traceStackSize]uintptr // scratch buffer for traceback
@@ -194,13 +175,6 @@ func StartTrace() error {
 		return errorString("tracing is already enabled")
 	}
 
-	trace.seqStart, trace.ticksStart = tracestamp()
-	trace.timeStart = nanotime()
-	trace.headerWritten = false
-	trace.footerWritten = false
-	trace.strings = make(map[string]uint64)
-	trace.stringSeq = 0
-
 	// Can't set trace.enabled yet. While the world is stopped, exitsyscall could
 	// already emit a delayed event (see exitTicks in exitsyscall) if we set trace.enabled here.
 	// That would lead to an inconsistent trace:
@@ -213,12 +187,15 @@ func StartTrace() error {
 	for _, gp := range allgs {
 		status := readgstatus(gp)
 		if status != _Gdead {
-			traceGoCreate(gp, gp.startpc)
+			traceGoCreate(gp, gp.startpc) // also resets gp.traceseq/tracelastp
 		}
 		if status == _Gwaiting {
+			// traceEvGoWaiting is implied to have seq=1.
+			gp.traceseq++
 			traceEvent(traceEvGoWaiting, -1, uint64(gp.goid))
 		}
 		if status == _Gsyscall {
+			gp.traceseq++
 			traceEvent(traceEvGoInSyscall, -1, uint64(gp.goid))
 		} else {
 			gp.sysblocktraced = false
@@ -226,6 +203,17 @@ func StartTrace() error {
 	}
 	traceProcStart()
 	traceGoStart()
+	// Note: ticksStart needs to be set after we emit traceEvGoInSyscall events.
+	// If we do it the other way around, it is possible that exitsyscall will
+	// query sysexitticks after ticksStart but before traceEvGoInSyscall timestamp.
+	// It will lead to a false conclusion that cputicks is broken.
+	trace.ticksStart = cputicks()
+	trace.timeStart = nanotime()
+	trace.headerWritten = false
+	trace.footerWritten = false
+	trace.strings = make(map[string]uint64)
+	trace.stringSeq = 0
+	trace.seqGC = 0
 	_g_.m.startingtrace = false
 	trace.enabled = true
 
@@ -382,11 +370,9 @@ func ReadTrace() []byte {
 		var data []byte
 		data = append(data, traceEvFrequency|0<<traceArgCountShift)
 		data = traceAppend(data, uint64(freq))
-		data = traceAppend(data, 0)
 		if timers.gp != nil {
 			data = append(data, traceEvTimerGoroutine|0<<traceArgCountShift)
 			data = traceAppend(data, uint64(timers.gp.goid))
-			data = traceAppend(data, 0)
 		}
 		// This will emit a bunch of full buffers, we will pick them up
 		// on the next iteration.
@@ -494,19 +480,14 @@ func traceEvent(ev byte, skip int, args ...uint64) {
 		(*bufp).set(buf)
 	}
 
-	seq, ticksraw := tracestamp()
-	seqDiff := seq - buf.lastSeq
-	ticks := uint64(ticksraw) / traceTickDiv
+	ticks := uint64(cputicks()) / traceTickDiv
 	tickDiff := ticks - buf.lastTicks
 	if buf.pos == 0 {
 		buf.byte(traceEvBatch | 1<<traceArgCountShift)
 		buf.varint(uint64(pid))
-		buf.varint(seq)
 		buf.varint(ticks)
-		seqDiff = 0
 		tickDiff = 0
 	}
-	buf.lastSeq = seq
 	buf.lastTicks = ticks
 	narg := byte(len(args))
 	if skip >= 0 {
@@ -525,7 +506,6 @@ func traceEvent(ev byte, skip int, args ...uint64) {
 		buf.varint(0)
 		lenp = &buf.arr[buf.pos-1]
 	}
-	buf.varint(seqDiff)
 	buf.varint(tickDiff)
 	for _, a := range args {
 		buf.varint(a)
@@ -892,7 +872,8 @@ func traceProcStop(pp *p) {
 }
 
 func traceGCStart() {
-	traceEvent(traceEvGCStart, 3)
+	traceEvent(traceEvGCStart, 3, trace.seqGC)
+	trace.seqGC++
 }
 
 func traceGCDone() {
@@ -916,13 +897,23 @@ func traceGCSweepDone() {
 }
 
 func traceGoCreate(newg *g, pc uintptr) {
+	newg.traceseq = 0
+	newg.tracelastp = getg().m.p
 	// +PCQuantum because traceFrameForPC expects return PCs and subtracts PCQuantum.
 	id := trace.stackTab.put([]uintptr{pc + sys.PCQuantum})
 	traceEvent(traceEvGoCreate, 2, uint64(newg.goid), uint64(id))
 }
 
 func traceGoStart() {
-	traceEvent(traceEvGoStart, -1, uint64(getg().m.curg.goid))
+	_g_ := getg().m.curg
+	_p_ := _g_.m.p
+	_g_.traceseq++
+	if _g_.tracelastp == _p_ {
+		traceEvent(traceEvGoStartLocal, -1, uint64(_g_.goid))
+	} else {
+		_g_.tracelastp = _p_
+		traceEvent(traceEvGoStart, -1, uint64(_g_.goid), _g_.traceseq)
+	}
 }
 
 func traceGoEnd() {
@@ -930,10 +921,14 @@ func traceGoEnd() {
 }
 
 func traceGoSched() {
+	_g_ := getg()
+	_g_.tracelastp = _g_.m.p
 	traceEvent(traceEvGoSched, 1)
 }
 
 func traceGoPreempt() {
+	_g_ := getg()
+	_g_.tracelastp = _g_.m.p
 	traceEvent(traceEvGoPreempt, 1)
 }
 
@@ -945,19 +940,37 @@ func traceGoPark(traceEv byte, skip int, gp *g) {
 }
 
 func traceGoUnpark(gp *g, skip int) {
-	traceEvent(traceEvGoUnblock, skip, uint64(gp.goid))
+	_p_ := getg().m.p
+	gp.traceseq++
+	if gp.tracelastp == _p_ {
+		traceEvent(traceEvGoUnblockLocal, skip, uint64(gp.goid))
+	} else {
+		gp.tracelastp = _p_
+		traceEvent(traceEvGoUnblock, skip, uint64(gp.goid), gp.traceseq)
+	}
 }
 
 func traceGoSysCall() {
 	traceEvent(traceEvGoSysCall, 1)
 }
 
-func traceGoSysExit(seq uint64, ts int64) {
-	if int64(seq)-int64(trace.seqStart) < 0 {
-		// The timestamp was obtained during a previous tracing session, ignore.
-		return
-	}
-	traceEvent(traceEvGoSysExit, -1, uint64(getg().m.curg.goid), seq, uint64(ts)/traceTickDiv)
+func traceGoSysExit(ts int64) {
+	if ts != 0 && ts < trace.ticksStart {
+		// There is a race between the code that initializes sysexitticks
+		// (in exitsyscall, which runs without a P, and therefore is not
+		// stopped with the rest of the world) and the code that initializes
+		// a new trace. The recorded sysexitticks must therefore be treated
+		// as "best effort". If they are valid for this trace, then great,
+		// use them for greater accuracy. But if they're not valid for this
+		// trace, assume that the trace was started after the actual syscall
+		// exit (but before we actually managed to start the goroutine,
+		// aka right now), and assign a fresh time stamp to keep the log consistent.
+		ts = 0
+	}
+	_g_ := getg().m.curg
+	_g_.traceseq++
+	_g_.tracelastp = _g_.m.p
+	traceEvent(traceEvGoSysExit, -1, uint64(_g_.goid), _g_.traceseq, uint64(ts)/traceTickDiv)
 }
 
 func traceGoSysBlock(pp *p) {