Commit b10b2f8d authored by Lynn Boger's avatar Lynn Boger Committed by David Chase

cmd/internal: add shift opcodes with shift operands on ppc64x

Some original shift opcodes for ppc64x expected an operand to be
a mask instead of a shift count, preventing some valid shift counts
from being written.

This adds new opcodes for shifts where needed, using mnemonics that
match the ppc64 asm and allowing the assembler to accept the full set
of valid shift counts.

Fixes #15016

Change-Id: Id573489f852038d06def279c13fd0523736878a7
Reviewed-on: https://go-review.googlesource.com/31853
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarCarlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: default avatarDavid Chase <drchase@google.com>
parent 5db7c6d3
......@@ -594,6 +594,15 @@ label1:
// }
RLWMI R1, R2, 4, 5, R3 // RLWMI R1, R2, $201326592, R3
// opcodes added with constant shift counts, not masks
RLDICR $3, R2, $24, R4
RLDICL $1, R2, $61, R6
RLDIMI $7, R2, $52, R7
//
// load/store multiple
//
......
......@@ -594,12 +594,18 @@ const (
ARFID
ARLDMI
ARLDMICC
ARLDIMI
ARLDIMICC
ARLDC
ARLDCCC
ARLDCR
ARLDCRCC
ARLDICR
ARLDICRCC
ARLDCL
ARLDCLCC
ARLDICL
ARLDICLCC
ASLBIA
ASLBIE
ASLBMFEE
......
......@@ -286,12 +286,18 @@ var Anames = []string{
"RFID",
"RLDMI",
"RLDMICC",
"RLDIMI",
"RLDIMICC",
"RLDC",
"RLDCCC",
"RLDCR",
"RLDCRCC",
"RLDICR",
"RLDICRCC",
"RLDCL",
"RLDCLCC",
"RLDICL",
"RLDICLCC",
"SLBIA",
"SLBIE",
"SLBMFEE",
......
......@@ -139,6 +139,8 @@ var optab = []Optab{
{ARLDC, C_SCON, C_REG, C_LCON, C_REG, 29, 4, 0},
{ARLDCL, C_SCON, C_REG, C_LCON, C_REG, 29, 4, 0},
{ARLDCL, C_REG, C_REG, C_LCON, C_REG, 14, 4, 0},
{ARLDICL, C_REG, C_REG, C_LCON, C_REG, 14, 4, 0},
{ARLDICL, C_SCON, C_REG, C_LCON, C_REG, 14, 4, 0},
{ARLDCL, C_REG, C_NONE, C_LCON, C_REG, 14, 4, 0},
{AFADD, C_FREG, C_NONE, C_NONE, C_FREG, 2, 4, 0},
{AFADD, C_FREG, C_FREG, C_NONE, C_FREG, 2, 4, 0},
......@@ -1484,6 +1486,8 @@ func buildop(ctxt *obj.Link) {
case ARLDMI:
opset(ARLDMICC, r0)
opset(ARLDIMI, r0)
opset(ARLDIMICC, r0)
case ARLDC:
opset(ARLDCCC, r0)
......@@ -1493,6 +1497,11 @@ func buildop(ctxt *obj.Link) {
opset(ARLDCLCC, r0)
opset(ARLDCRCC, r0)
case ARLDICL:
opset(ARLDICLCC, r0)
opset(ARLDICR, r0)
opset(ARLDICRCC, r0)
case AFMOVD:
opset(AFMOVDCC, r0)
opset(AFMOVDU, r0)
......@@ -2107,22 +2116,34 @@ func asmout(ctxt *obj.Link, p *obj.Prog, o *Optab, out []uint32) {
r = int(p.To.Reg)
}
d := vregoff(ctxt, p.From3)
var mask [2]uint8
maskgen64(ctxt, p, mask[:], uint64(d))
var a int
switch p.As {
// These opcodes expect a mask operand that has to be converted into the
// appropriate operand. The way these were defined, not all valid masks are possible.
// Left here for compatibility in case they were used or generated.
case ARLDCL, ARLDCLCC:
var mask [2]uint8
maskgen64(ctxt, p, mask[:], uint64(d))
a = int(mask[0]) /* MB */
if mask[1] != 63 {
ctxt.Diag("invalid mask for rotate: %x (end != bit 63)\n%v", uint64(d), p)
}
case ARLDCR, ARLDCRCC:
var mask [2]uint8
maskgen64(ctxt, p, mask[:], uint64(d))
a = int(mask[1]) /* ME */
if mask[0] != 0 {
ctxt.Diag("invalid mask for rotate: %x (start != 0)\n%v", uint64(d), p)
}
// These opcodes use a shift count like the ppc64 asm, no mask conversion done
case ARLDICR, ARLDICRCC, ARLDICL, ARLDICLCC:
a = int(d)
default:
ctxt.Diag("unexpected op in rldc case\n%v", p)
a = 0
......@@ -2403,18 +2424,32 @@ func asmout(ctxt *obj.Link, p *obj.Prog, o *Optab, out []uint32) {
v := regoff(ctxt, &p.From)
d := vregoff(ctxt, p.From3)
var mask [2]uint8
maskgen64(ctxt, p, mask[:], uint64(d))
if int32(mask[1]) != (63 - v) {
ctxt.Diag("invalid mask for shift: %x (shift %d)\n%v", uint64(d), v, p)
}
o1 = AOP_RRR(opirr(ctxt, p.As), uint32(p.Reg), uint32(p.To.Reg), (uint32(v) & 0x1F))
o1 |= (uint32(mask[0]) & 31) << 6
if v&0x20 != 0 {
o1 |= 1 << 1
}
if mask[0]&0x20 != 0 {
o1 |= 1 << 5 /* mb[5] is top bit */
// Original opcodes had mask operands which had to be converted to a shift count as expected by
// the ppc64 asm.
switch p.As {
case ARLDMI, ARLDMICC:
var mask [2]uint8
maskgen64(ctxt, p, mask[:], uint64(d))
if int32(mask[1]) != (63 - v) {
ctxt.Diag("invalid mask for shift: %x (shift %d)\n%v", uint64(d), v, p)
}
o1 = AOP_RRR(opirr(ctxt, p.As), uint32(p.Reg), uint32(p.To.Reg), (uint32(v) & 0x1F))
o1 |= (uint32(mask[0]) & 31) << 6
if v&0x20 != 0 {
o1 |= 1 << 1
}
if mask[0]&0x20 != 0 {
o1 |= 1 << 5 /* mb[5] is top bit */
}
// Opcodes with shift count operands.
case ARLDIMI, ARLDIMICC:
o1 = AOP_RRR(opirr(ctxt, p.As), uint32(p.Reg), uint32(p.To.Reg), (uint32(v) & 0x1F))
o1 |= (uint32(d) & 31) << 6
if v&0x20 != 0 {
o1 |= 1 << 1
}
}
case 31: /* dword */
......@@ -3340,6 +3375,15 @@ func oprrr(ctxt *obj.Link, a obj.As) uint32 {
case ARLDCR:
return OPVCC(30, 9, 0, 0)
case ARLDICL:
return OPVCC(30, 0, 0, 0)
case ARLDICLCC:
return OPVCC(30, 0, 0, 1)
case ARLDICR:
return OPVCC(30, 0, 0, 0) | 2<<1 // rldicr
case ARLDICRCC:
return OPVCC(30, 0, 0, 1) | 2<<1 // rldicr.
case ASYSCALL:
return OPVCC(17, 1, 0, 0)
......@@ -3771,7 +3815,10 @@ func opirr(ctxt *obj.Link, a obj.As) uint32 {
return OPVCC(30, 0, 0, 0) | 3<<2 /* rldimi */
case ARLDMICC:
return OPVCC(30, 0, 0, 1) | 3<<2
case ARLDIMI:
return OPVCC(30, 0, 0, 0) | 3<<2 /* rldimi */
case ARLDIMICC:
return OPVCC(30, 0, 0, 1) | 3<<2
case ARLWNM:
return OPVCC(21, 0, 0, 0) /* rlwinm */
case ARLWNMCC:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment