runtime: split extern.go into debug.go, extern.go, sig.go.

move mal next to the other malloc functions.

R=r
CC=golang-dev
https://golang.org/cl/1701045

src/pkg/runtime/Makefile

@@ -21,8 +21,10 @@ CFLAGS_windows=-D__WINDOWS__
 CFLAGS=-I$(GOOS) -I$(GOARCH) -I$(GOOS)/$(GOARCH) -wF $(CFLAGS_$(SIZE)) $(CFLAGS_$(GOARCH)) $(CFLAGS_$(GOOS))
 
 GOFILES=\
+	debug.go\
 	error.go\
 	extern.go\
+	sig.go\
 	type.go\
 	version.go\
 

src/pkg/runtime/debug.go

+// Copyright 2009 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package runtime
+
+// Breakpoint() executes a breakpoint trap.
+func Breakpoint()
+
+// LockOSThread wires the calling goroutine to its current operating system thread.
+// Until the calling goroutine exits or calls UnlockOSThread, it will always
+// execute in that thread, and no other goroutine can.
+// LockOSThread cannot be used during init functions.
+func LockOSThread()
+
+// UnlockOSThread unwires the calling goroutine from its fixed operating system thread.
+// If the calling goroutine has not called LockOSThread, UnlockOSThread is a no-op.
+func UnlockOSThread()
+
+// GOMAXPROCS sets the maximum number of CPUs that can be executing
+// simultaneously and returns the previous setting.  If n < 1, it does not
+// change the current setting.
+// This call will go away when the scheduler improves.
+func GOMAXPROCS(n int) int
+
+// Cgocalls returns the number of cgo calls made by the current process.
+func Cgocalls() int64
+
+type MemStatsType struct {
+	// General statistics.
+	// Not locked during update; approximate.
+	Alloc      uint64 // bytes allocated and still in use
+	TotalAlloc uint64 // bytes allocated (even if freed)
+	Sys        uint64 // bytes obtained from system (should be sum of XxxSys below)
+	Lookups    uint64 // number of pointer lookups
+	Mallocs    uint64 // number of mallocs
+
+	// Main allocation heap statistics.
+	HeapAlloc uint64 // bytes allocated and still in use
+	HeapSys   uint64 // bytes obtained from system
+	HeapIdle  uint64 // bytes in idle spans
+	HeapInuse uint64 // bytes in non-idle span
+
+	// Low-level fixed-size structure allocator statistics.
+	//	Inuse is bytes used now.
+	//	Sys is bytes obtained from system.
+	StackInuse  uint64 // bootstrap stacks
+	StackSys    uint64
+	MSpanInuse  uint64 // mspan structures
+	MSpanSys    uint64
+	MCacheInuse uint64 // mcache structures
+	MCacheSys   uint64
+	MHeapMapSys uint64 // heap map
+	BuckHashSys uint64 // profiling bucket hash table
+
+	// Garbage collector statistics.
+	NextGC   uint64
+	PauseNs  uint64
+	NumGC    uint32
+	EnableGC bool
+	DebugGC  bool
+
+	// Per-size allocation statistics.
+	// Not locked during update; approximate.
+	BySize [67]struct {
+		Size    uint32
+		Mallocs uint64
+		Frees   uint64
+	}
+}
+
+// MemStats holds statistics about the memory system.
+// The statistics are only approximate, as they are not interlocked on update.
+var MemStats MemStatsType
+
+// Alloc allocates a block of the given size.
+// FOR TESTING AND DEBUGGING ONLY.
+func Alloc(uintptr) *byte
+
+// Free frees the block starting at the given pointer.
+// FOR TESTING AND DEBUGGING ONLY.
+func Free(*byte)
+
+// Lookup returns the base and size of the block containing the given pointer.
+// FOR TESTING AND DEBUGGING ONLY.
+func Lookup(*byte) (*byte, uintptr)
+
+// GC runs a garbage collection.
+func GC()
+
+// MemProfileRate controls the fraction of memory allocations
+// that are recorded and reported in the memory profile.
+// The profiler aims to sample an average of
+// one allocation per MemProfileRate bytes allocated.
+//
+// To include every allocated block in the profile, set MemProfileRate to 1.
+// To turn off profiling entirely, set MemProfileRate to 0.
+//
+// The tools that process the memory profiles assume that the
+// profile rate is constant across the lifetime of the program
+// and equal to the current value.  Programs that change the
+// memory profiling rate should do so just once, as early as
+// possible in the execution of the program (for example,
+// at the beginning of main).
+var MemProfileRate int = 512 * 1024
+
+// A MemProfileRecord describes the live objects allocated
+// by a particular call sequence (stack trace).
+type MemProfileRecord struct {
+	AllocBytes, FreeBytes     int64       // number of bytes allocated, freed
+	AllocObjects, FreeObjects int64       // number of objects allocated, freed
+	Stack0                    [32]uintptr // stack trace for this record; ends at first 0 entry
+}
+
+// InUseBytes returns the number of bytes in use (AllocBytes - FreeBytes).
+func (r *MemProfileRecord) InUseBytes() int64 { return r.AllocBytes - r.FreeBytes }
+
+// InUseObjects returns the number of objects in use (AllocObjects - FreeObjects).
+func (r *MemProfileRecord) InUseObjects() int64 {
+	return r.AllocObjects - r.FreeObjects
+}
+
+// Stack returns the stack trace associated with the record,
+// a prefix of r.Stack0.
+func (r *MemProfileRecord) Stack() []uintptr {
+	for i, v := range r.Stack0 {
+		if v == 0 {
+			return r.Stack0[0:i]
+		}
+	}
+	return r.Stack0[0:]
+}
+
+// MemProfile returns n, the number of records in the current memory profile.
+// If len(p) >= n, MemProfile copies the profile into p and returns n, true.
+// If len(p) < n, MemProfile does not change p and returns n, false.
+//
+// If inuseZero is true, the profile includes allocation records
+// where r.AllocBytes > 0 but r.AllocBytes == r.FreeBytes.
+// These are sites where memory was allocated, but it has all
+// been released back to the runtime.
+func MemProfile(p []MemProfileRecord, inuseZero bool) (n int, ok bool)

src/pkg/runtime/extern.go

@@ -18,9 +18,6 @@ func Gosched()
 // Goexit runs all deferred calls before terminating the goroutine.
 func Goexit()
 
-// Breakpoint() executes a breakpoint trap.
-func Breakpoint()
-
 // Caller reports file and line number information about function invocations on
 // the calling goroutine's stack.  The argument skip is the number of stack frames to
 // ascend, with 0 identifying the the caller of Caller.  The return values report the
@@ -95,25 +92,6 @@ func (f *Func) FileLine(pc uintptr) (file string, line int) {
 // mid returns the current os thread (m) id.
 func mid() uint32
 
-// LockOSThread wires the calling goroutine to its current operating system thread.
-// Until the calling goroutine exits or calls UnlockOSThread, it will always
-// execute in that thread, and no other goroutine can.
-// LockOSThread cannot be used during init functions.
-func LockOSThread()
-
-// UnlockOSThread unwires the calling goroutine from its fixed operating system thread.
-// If the calling goroutine has not called LockOSThread, UnlockOSThread is a no-op.
-func UnlockOSThread()
-
-// GOMAXPROCS sets the maximum number of CPUs that can be executing
-// simultaneously and returns the previous setting.  If n < 1, it does not
-// change the current setting.
-// This call will go away when the scheduler improves.
-func GOMAXPROCS(n int) int
-
-// Cgocalls returns the number of cgo calls made by the current process.
-func Cgocalls() int64
-
 // Semacquire waits until *s > 0 and then atomically decrements it.
 // It is intended as a simple sleep primitive for use by the synchronization
 // library and should not be used directly.
@@ -125,79 +103,6 @@ func Semacquire(s *uint32)
 // library and should not be used directly.
 func Semrelease(s *uint32)
 
-// Sigrecv returns a bitmask of signals that have arrived since the last call to Sigrecv.
-// It blocks until at least one signal arrives.
-func Sigrecv() uint32
-
-// Signame returns a string describing the signal, or "" if the signal is unknown.
-func Signame(sig int32) string
-
-// Siginit enables receipt of signals via Sigrecv.  It should typically
-// be called during initialization.
-func Siginit()
-
-type MemStatsType struct {
-	// General statistics.
-	// Not locked during update; approximate.
-	Alloc      uint64 // bytes allocated and still in use
-	TotalAlloc uint64 // bytes allocated (even if freed)
-	Sys        uint64 // bytes obtained from system (should be sum of XxxSys below)
-	Lookups    uint64 // number of pointer lookups
-	Mallocs    uint64 // number of mallocs
-
-	// Main allocation heap statistics.
-	HeapAlloc uint64 // bytes allocated and still in use
-	HeapSys   uint64 // bytes obtained from system
-	HeapIdle  uint64 // bytes in idle spans
-	HeapInuse uint64 // bytes in non-idle span
-
-	// Low-level fixed-size structure allocator statistics.
-	//	Inuse is bytes used now.
-	//	Sys is bytes obtained from system.
-	StackInuse  uint64 // bootstrap stacks
-	StackSys    uint64
-	MSpanInuse  uint64 // mspan structures
-	MSpanSys    uint64
-	MCacheInuse uint64 // mcache structures
-	MCacheSys   uint64
-	MHeapMapSys uint64 // heap map
-	BuckHashSys uint64 // profiling bucket hash table
-
-	// Garbage collector statistics.
-	NextGC   uint64
-	PauseNs  uint64
-	NumGC    uint32
-	EnableGC bool
-	DebugGC  bool
-
-	// Per-size allocation statistics.
-	// Not locked during update; approximate.
-	BySize [67]struct {
-		Size    uint32
-		Mallocs uint64
-		Frees   uint64
-	}
-}
-
-// MemStats holds statistics about the memory system.
-// The statistics are only approximate, as they are not interlocked on update.
-var MemStats MemStatsType
-
-// Alloc allocates a block of the given size.
-// FOR TESTING AND DEBUGGING ONLY.
-func Alloc(uintptr) *byte
-
-// Free frees the block starting at the given pointer.
-// FOR TESTING AND DEBUGGING ONLY.
-func Free(*byte)
-
-// Lookup returns the base and size of the block containing the given pointer.
-// FOR TESTING AND DEBUGGING ONLY.
-func Lookup(*byte) (*byte, uintptr)
-
-// GC runs a garbage collection.
-func GC()
-
 // SetFinalizer sets the finalizer associated with x to f.
 // When the garbage collector finds an unreachable block
 // with an associated finalizer, it clears the association and creates
@@ -261,56 +166,3 @@ func GOROOT() string {
 // A trailing + indicates that the tree had local modifications
 // at the time of the build.
 func Version() string { return defaultVersion }
-
-// MemProfileRate controls the fraction of memory allocations
-// that are recorded and reported in the memory profile.
-// The profiler aims to sample an average of
-// one allocation per MemProfileRate bytes allocated.
-//
-// To include every allocated block in the profile, set MemProfileRate to 1.
-// To turn off profiling entirely, set MemProfileRate to 0.
-//
-// The tools that process the memory profiles assume that the
-// profile rate is constant across the lifetime of the program
-// and equal to the current value.  Programs that change the
-// memory profiling rate should do so just once, as early as
-// possible in the execution of the program (for example,
-// at the beginning of main).
-var MemProfileRate int = 512 * 1024
-
-// A MemProfileRecord describes the live objects allocated
-// by a particular call sequence (stack trace).
-type MemProfileRecord struct {
-	AllocBytes, FreeBytes     int64       // number of bytes allocated, freed
-	AllocObjects, FreeObjects int64       // number of objects allocated, freed
-	Stack0                    [32]uintptr // stack trace for this record; ends at first 0 entry
-}
-
-// InUseBytes returns the number of bytes in use (AllocBytes - FreeBytes).
-func (r *MemProfileRecord) InUseBytes() int64 { return r.AllocBytes - r.FreeBytes }
-
-// InUseObjects returns the number of objects in use (AllocObjects - FreeObjects).
-func (r *MemProfileRecord) InUseObjects() int64 {
-	return r.AllocObjects - r.FreeObjects
-}
-
-// Stack returns the stack trace associated with the record,
-// a prefix of r.Stack0.
-func (r *MemProfileRecord) Stack() []uintptr {
-	for i, v := range r.Stack0 {
-		if v == 0 {
-			return r.Stack0[0:i]
-		}
-	}
-	return r.Stack0[0:]
-}
-
-// MemProfile returns n, the number of records in the current memory profile.
-// If len(p) >= n, MemProfile copies the profile into p and returns n, true.
-// If len(p) < n, MemProfile does not change p and returns n, false.
-//
-// If inuseZero is true, the profile includes allocation records
-// where r.AllocBytes > 0 but r.AllocBytes == r.FreeBytes.
-// These are sites where memory was allocated, but it has all
-// been released back to the runtime.
-func MemProfile(p []MemProfileRecord, inuseZero bool) (n int, ok bool)

src/pkg/runtime/malloc.goc

@@ -261,6 +261,10 @@ mal(uintptr n)
 	return mallocgc(n, 0, 1, 1);
 }
 
+func mal(n uint32) (ret *uint8) {
+	ret = mal(n);
+}
+
 // Stack allocator uses malloc/free most of the time,
 // but if we're in the middle of malloc and need stack,
 // we have to do something else to avoid deadlock.

src/pkg/runtime/runtime1.goc

@@ -5,10 +5,6 @@
 package runtime
 #include "runtime.h"
 
-func mal(n uint32) (ret *uint8) {
-	ret = mal(n);
-}
-
 func GOMAXPROCS(n int32) (ret int32) {
 	ret = gomaxprocsfunc(n);
 }

src/pkg/runtime/sig.go

+// Copyright 2009 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package runtime
+
+// Sigrecv returns a bitmask of signals that have arrived since the last call to Sigrecv.
+// It blocks until at least one signal arrives.
+func Sigrecv() uint32
+
+// Signame returns a string describing the signal, or "" if the signal is unknown.
+func Signame(sig int32) string
+
+// Siginit enables receipt of signals via Sigrecv.  It should typically
+// be called during initialization.
+func Siginit()