cpufreq: Tegra: implement intermediate frequency callbacks

Tegra has been switching to intermediate frequency (pll_p_clk) forever.
CPUFreq core has better support for handling notifications for these
frequencies and so we can adapt Tegra's driver to it.

Also do a WARN() if clk_set_parent() fails while moving back to pll_x
as we should have atleast restored to earlier frequency on error.
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

drivers/cpufreq/tegra-cpufreq.c

@@ -45,46 +45,51 @@ static struct clk *cpu_clk;
 static struct clk *pll_x_clk;
 static struct clk *pll_p_clk;
 static struct clk *emc_clk;
+static bool pll_x_prepared;
 
-static int tegra_cpu_clk_set_rate(unsigned long rate)
+static unsigned int tegra_get_intermediate(struct cpufreq_policy *policy,
+					   unsigned int index)
+{
+	unsigned int ifreq = clk_get_rate(pll_p_clk) / 1000;
+
+	/*
+	 * Don't switch to intermediate freq if:
+	 * - we are already at it, i.e. policy->cur == ifreq
+	 * - index corresponds to ifreq
+	 */
+	if ((freq_table[index].frequency == ifreq) || (policy->cur == ifreq))
+		return 0;
+
+	return ifreq;
+}
+
+static int tegra_target_intermediate(struct cpufreq_policy *policy,
+				     unsigned int index)
 {
 	int ret;
 
 	/*
 	 * Take an extra reference to the main pll so it doesn't turn
-	 * off when we move the cpu off of it
+	 * off when we move the cpu off of it as enabling it again while we
+	 * switch to it from tegra_target() would take additional time. Though
+	 * when target-freq is intermediate freq, we don't need to take this
+	 * reference.
 	 */
 	clk_prepare_enable(pll_x_clk);
 
 	ret = clk_set_parent(cpu_clk, pll_p_clk);
-	if (ret) {
-		pr_err("Failed to switch cpu to clock pll_p\n");
-		goto out;
-	}
-
-	if (rate == clk_get_rate(pll_p_clk))
-		goto out;
-
-	ret = clk_set_rate(pll_x_clk, rate);
-	if (ret) {
-		pr_err("Failed to change pll_x to %lu\n", rate);
-		goto out;
-	}
-
-	ret = clk_set_parent(cpu_clk, pll_x_clk);
-	if (ret) {
-		pr_err("Failed to switch cpu to clock pll_x\n");
-		goto out;
-	}
+	if (ret)
+		clk_disable_unprepare(pll_x_clk);
+	else
+		pll_x_prepared = true;
 
-out:
-	clk_disable_unprepare(pll_x_clk);
 	return ret;
 }
 
 static int tegra_target(struct cpufreq_policy *policy, unsigned int index)
 {
 	unsigned long rate = freq_table[index].frequency;
+	unsigned int ifreq = clk_get_rate(pll_p_clk) / 1000;
 	int ret = 0;
 
 	/*
@@ -98,10 +103,30 @@ static int tegra_target(struct cpufreq_policy *policy, unsigned int index)
 	else
 		clk_set_rate(emc_clk, 100000000);  /* emc 50Mhz */
 
-	ret = tegra_cpu_clk_set_rate(rate * 1000);
+	/*
+	 * target freq == pll_p, don't need to take extra reference to pll_x_clk
+	 * as it isn't used anymore.
+	 */
+	if (rate == ifreq)
+		return clk_set_parent(cpu_clk, pll_p_clk);
+
+	ret = clk_set_rate(pll_x_clk, rate * 1000);
+	/* Restore to earlier frequency on error, i.e. pll_x */
 	if (ret)
-		pr_err("cpu-tegra: Failed to set cpu frequency to %lu kHz\n",
-			rate);
+		pr_err("Failed to change pll_x to %lu\n", rate);
+
+	ret = clk_set_parent(cpu_clk, pll_x_clk);
+	/* This shouldn't fail while changing or restoring */
+	WARN_ON(ret);
+
+	/*
+	 * Drop count to pll_x clock only if we switched to intermediate freq
+	 * earlier while transitioning to a target frequency.
+	 */
+	if (pll_x_prepared) {
+		clk_disable_unprepare(pll_x_clk);
+		pll_x_prepared = false;
+	}
 
 	return ret;
 }
@@ -137,16 +162,18 @@ static int tegra_cpu_exit(struct cpufreq_policy *policy)
 }
 
 static struct cpufreq_driver tegra_cpufreq_driver = {
-	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
-	.verify		= cpufreq_generic_frequency_table_verify,
-	.target_index	= tegra_target,
-	.get		= cpufreq_generic_get,
-	.init		= tegra_cpu_init,
-	.exit		= tegra_cpu_exit,
-	.name		= "tegra",
-	.attr		= cpufreq_generic_attr,
+	.flags			= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify			= cpufreq_generic_frequency_table_verify,
+	.get_intermediate	= tegra_get_intermediate,
+	.target_intermediate	= tegra_target_intermediate,
+	.target_index		= tegra_target,
+	.get			= cpufreq_generic_get,
+	.init			= tegra_cpu_init,
+	.exit			= tegra_cpu_exit,
+	.name			= "tegra",
+	.attr			= cpufreq_generic_attr,
 #ifdef CONFIG_PM
-	.suspend	= cpufreq_generic_suspend,
+	.suspend		= cpufreq_generic_suspend,
 #endif
 };