Merge tag 'usb-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Grek KH:
 "Here are some small USB fixes for 5.0-rc6.

  Nothing huge, the normal amount of USB gadget fixes as well as some
  USB phy fixes. There's also a typec fix as well. Full details are in
  the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: tcpm: Correct the PPS out_volt calculation
  usb: gadget: musb: fix short isoc packets with inventra dma
  usb: phy: am335x: fix race condition in _probe
  usb: dwc3: exynos: Fix error handling of clk_prepare_enable
  usb: phy: fix link errors
  usb: gadget: udc: net2272: Fix bitwise and boolean operations
  usb: dwc3: gadget: Handle 0 xfer length for OUT EP

drivers/usb/dwc3/dwc3-exynos.c

@@ -78,7 +78,7 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
 	for (i = 0; i < exynos->num_clks; i++) {
 		ret = clk_prepare_enable(exynos->clks[i]);
 		if (ret) {
-			while (--i > 0)
+			while (i-- > 0)
 				clk_disable_unprepare(exynos->clks[i]);
 			return ret;
 		}
@@ -223,7 +223,7 @@ static int dwc3_exynos_resume(struct device *dev)
 	for (i = 0; i < exynos->num_clks; i++) {
 		ret = clk_prepare_enable(exynos->clks[i]);
 		if (ret) {
-			while (--i > 0)
+			while (i-- > 0)
 				clk_disable_unprepare(exynos->clks[i]);
 			return ret;
 		}

drivers/usb/dwc3/gadget.c

@@ -1119,7 +1119,7 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
 	unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
 	unsigned int rem = length % maxp;
 
-	if (rem && usb_endpoint_dir_out(dep->endpoint.desc)) {
+	if ((!length || rem) && usb_endpoint_dir_out(dep->endpoint.desc)) {
 		struct dwc3	*dwc = dep->dwc;
 		struct dwc3_trb	*trb;
 

drivers/usb/gadget/udc/net2272.c

@@ -2083,7 +2083,7 @@ static irqreturn_t net2272_irq(int irq, void *_dev)
 #if defined(PLX_PCI_RDK2)
 	/* see if PCI int for us by checking irqstat */
 	intcsr = readl(dev->rdk2.fpga_base_addr + RDK2_IRQSTAT);
-	if (!intcsr & (1 << NET2272_PCI_IRQ)) {
+	if (!(intcsr & (1 << NET2272_PCI_IRQ))) {
 		spin_unlock(&dev->lock);
 		return IRQ_NONE;
 	}

drivers/usb/musb/musb_gadget.c

@@ -452,13 +452,10 @@ void musb_g_tx(struct musb *musb, u8 epnum)
 	}
 
 	if (request) {
-		u8	is_dma = 0;
-		bool	short_packet = false;
 
 		trace_musb_req_tx(req);
 
 		if (dma && (csr & MUSB_TXCSR_DMAENAB)) {
-			is_dma = 1;
 			csr |= MUSB_TXCSR_P_WZC_BITS;
 			csr &= ~(MUSB_TXCSR_DMAENAB | MUSB_TXCSR_P_UNDERRUN |
 				 MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_AUTOSET);
@@ -476,16 +473,8 @@ void musb_g_tx(struct musb *musb, u8 epnum)
 		 */
 		if ((request->zero && request->length)
 			&& (request->length % musb_ep->packet_sz == 0)
-			&& (request->actual == request->length))
-				short_packet = true;
+			&& (request->actual == request->length)) {
 
-		if ((musb_dma_inventra(musb) || musb_dma_ux500(musb)) &&
-			(is_dma && (!dma->desired_mode ||
-				(request->actual &
-					(musb_ep->packet_sz - 1)))))
-				short_packet = true;
-
-		if (short_packet) {
 			/*
 			 * On DMA completion, FIFO may not be
 			 * available yet...

drivers/usb/musb/musbhsdma.c

@@ -346,12 +346,10 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
 				channel->status = MUSB_DMA_STATUS_FREE;
 
 				/* completed */
-				if ((devctl & MUSB_DEVCTL_HM)
-					&& (musb_channel->transmit)
-					&& ((channel->desired_mode == 0)
-					    || (channel->actual_len &
-					    (musb_channel->max_packet_sz - 1)))
-				    ) {
+				if (musb_channel->transmit &&
+					(!channel->desired_mode ||
+					(channel->actual_len %
+					    musb_channel->max_packet_sz))) {
 					u8  epnum  = musb_channel->epnum;
 					int offset = musb->io.ep_offset(epnum,
 								    MUSB_TXCSR);
@@ -363,11 +361,14 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
 					 */
 					musb_ep_select(mbase, epnum);
 					txcsr = musb_readw(mbase, offset);
-					txcsr &= ~(MUSB_TXCSR_DMAENAB
+					if (channel->desired_mode == 1) {
+						txcsr &= ~(MUSB_TXCSR_DMAENAB
 							| MUSB_TXCSR_AUTOSET);
-					musb_writew(mbase, offset, txcsr);
-					/* Send out the packet */
-					txcsr &= ~MUSB_TXCSR_DMAMODE;
+						musb_writew(mbase, offset, txcsr);
+						/* Send out the packet */
+						txcsr &= ~MUSB_TXCSR_DMAMODE;
+						txcsr |= MUSB_TXCSR_DMAENAB;
+					}
 					txcsr |=  MUSB_TXCSR_TXPKTRDY;
 					musb_writew(mbase, offset, txcsr);
 				}

drivers/usb/phy/Kconfig

@@ -21,7 +21,7 @@ config AB8500_USB
 
 config FSL_USB2_OTG
 	bool "Freescale USB OTG Transceiver Driver"
-	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM
+	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM=y && PM
 	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	select USB_PHY
 	help

drivers/usb/phy/phy-am335x.c

@@ -61,9 +61,6 @@ static int am335x_phy_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ret = usb_add_phy_dev(&am_phy->usb_phy_gen.phy);
-	if (ret)
-		return ret;
 	am_phy->usb_phy_gen.phy.init = am335x_init;
 	am_phy->usb_phy_gen.phy.shutdown = am335x_shutdown;
 
@@ -82,7 +79,7 @@ static int am335x_phy_probe(struct platform_device *pdev)
 	device_set_wakeup_enable(dev, false);
 	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, false);
 
-	return 0;
+	return usb_add_phy_dev(&am_phy->usb_phy_gen.phy);
 }
 
 static int am335x_phy_remove(struct platform_device *pdev)

drivers/usb/typec/tcpm/tcpm.c

@@ -2297,7 +2297,8 @@ static unsigned int tcpm_pd_select_pps_apdo(struct tcpm_port *port)
 					      pdo_pps_apdo_max_voltage(snk));
 		port->pps_data.max_curr = min_pps_apdo_current(src, snk);
 		port->pps_data.out_volt = min(port->pps_data.max_volt,
-					      port->pps_data.out_volt);
+					      max(port->pps_data.min_volt,
+						  port->pps_data.out_volt));
 		port->pps_data.op_curr = min(port->pps_data.max_curr,
 					     port->pps_data.op_curr);
 	}