[media] rc: Hauppauge z8f0811 can decode RC6

The hardware does not decode the 16, 20 or 24 bit variety.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

drivers/media/i2c/ir-kbd-i2c.c

@@ -35,6 +35,7 @@
  *
  */
 
+#include <asm/unaligned.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -63,15 +64,18 @@ module_param(debug, int, 0644);    /* debug level (0,1,2) */
 /* ----------------------------------------------------------------------- */
 
 static int get_key_haup_common(struct IR_i2c *ir, enum rc_type *protocol,
-			       u32 *scancode, u8 *ptoggle, int size, int offset)
+					u32 *scancode, u8 *ptoggle, int size)
 {
 	unsigned char buf[6];
-	int start, range, toggle, dev, code, ircode;
+	int start, range, toggle, dev, code, ircode, vendor;
 
 	/* poll IR chip */
 	if (size != i2c_master_recv(ir->c, buf, size))
 		return -EIO;
 
+	if (buf[0] & 0x80) {
+		int offset = (size == 6) ? 3 : 0;
+
 		/* split rc5 data block ... */
 		start  = (buf[offset] >> 7) &    1;
 		range  = (buf[offset] >> 6) &    1;
@@ -81,7 +85,8 @@ static int get_key_haup_common(struct IR_i2c *ir, enum rc_type *protocol,
 
 		/* rc5 has two start bits
 		 * the first bit must be one
-	 * the second bit defines the command range (1 = 0-63, 0 = 64 - 127)
+		 * the second bit defines the command range:
+		 * 1 = 0-63, 0 = 64 - 127
 		 */
 		if (!start)
 			/* no key pressed */
@@ -95,19 +100,44 @@ static int get_key_haup_common(struct IR_i2c *ir, enum rc_type *protocol,
 		if (!range)
 			code += 64;
 
-	dprintk(1,"ir hauppauge (rc5): s%d r%d t%d dev=%d code=%d\n",
+		dprintk(1, "ir hauppauge (rc5): s%d r%d t%d dev=%d code=%d\n",
 			start, range, toggle, dev, code);
 
 		*protocol = RC_TYPE_RC5;
 		*scancode = RC_SCANCODE_RC5(dev, code);
 		*ptoggle = toggle;
+
+		return 1;
+	} else if (size == 6 && (buf[0] & 0x40)) {
+		code = buf[4];
+		dev = buf[3];
+		vendor = get_unaligned_be16(buf + 1);
+
+		if (vendor == 0x800f) {
+			*ptoggle = (dev & 0x80) != 0;
+			*protocol = RC_TYPE_RC6_MCE;
+			dev &= 0x7f;
+			dprintk(1, "ir hauppauge (rc6-mce): t%d vendor=%d dev=%d code=%d\n",
+						toggle, vendor, dev, code);
+		} else {
+			*ptoggle = 0;
+			*protocol = RC_TYPE_RC6_6A_32;
+			dprintk(1, "ir hauppauge (rc6-6a-32): vendor=%d dev=%d code=%d\n",
+							vendor, dev, code);
+		}
+
+		*scancode = RC_SCANCODE_RC6_6A(vendor, dev, code);
+
 		return 1;
+	}
+
+	return 0;
 }
 
 static int get_key_haup(struct IR_i2c *ir, enum rc_type *protocol,
 			u32 *scancode, u8 *toggle)
 {
-	return get_key_haup_common (ir, protocol, scancode, toggle, 3, 0);
+	return get_key_haup_common(ir, protocol, scancode, toggle, 3);
 }
 
 static int get_key_haup_xvr(struct IR_i2c *ir, enum rc_type *protocol,
@@ -126,7 +156,7 @@ static int get_key_haup_xvr(struct IR_i2c *ir, enum rc_type *protocol,
 	if (ret != 1)
 		return (ret < 0) ? ret : -EINVAL;
 
-	return get_key_haup_common(ir, protocol, scancode, toggle, 6, 3);
+	return get_key_haup_common(ir, protocol, scancode, toggle, 6);
 }
 
 static int get_key_pixelview(struct IR_i2c *ir, enum rc_type *protocol,
@@ -347,7 +377,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	case 0x71:
 		name        = "Hauppauge/Zilog Z8";
 		ir->get_key = get_key_haup_xvr;
-		rc_type     = RC_BIT_RC5;
+		rc_type     = RC_BIT_RC5 | RC_BIT_RC6_MCE | RC_BIT_RC6_6A_32;
 		ir_codes    = RC_MAP_HAUPPAUGE;
 		break;
 	}

drivers/media/pci/cx18/cx18-i2c.c

@@ -98,7 +98,8 @@ static int cx18_i2c_new_ir(struct cx18 *cx, struct i2c_adapter *adap, u32 hw,
 	case CX18_HW_Z8F0811_IR_RX_HAUP:
 		init_data->ir_codes = RC_MAP_HAUPPAUGE;
 		init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
-		init_data->type = RC_BIT_RC5;
+		init_data->type = RC_BIT_RC5 | RC_BIT_RC6_MCE |
+							RC_BIT_RC6_6A_32;
 		init_data->name = cx->card_name;
 		info.platform_data = init_data;
 		break;

drivers/media/pci/cx88/cx88-input.c

@@ -631,7 +631,8 @@ void cx88_i2c_init_ir(struct cx88_core *core)
 			/* Hauppauge XVR */
 			core->init_data.name = "cx88 Hauppauge XVR remote";
 			core->init_data.ir_codes = RC_MAP_HAUPPAUGE;
-			core->init_data.type = RC_BIT_RC5;
+			core->init_data.type = RC_BIT_RC5 | RC_BIT_RC6_MCE |
+							RC_BIT_RC6_6A_32;
 			core->init_data.internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
 
 			info.platform_data = &core->init_data;

drivers/media/pci/ivtv/ivtv-i2c.c

@@ -215,7 +215,8 @@ static int ivtv_i2c_new_ir(struct ivtv *itv, u32 hw, const char *type, u8 addr)
 		/* Default to grey remote */
 		init_data->ir_codes = RC_MAP_HAUPPAUGE;
 		init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
-		init_data->type = RC_BIT_RC5;
+		init_data->type = RC_BIT_RC5 | RC_BIT_RC6_MCE |
+							RC_BIT_RC6_6A_32;
 		init_data->name = itv->card_name;
 		break;
 	case IVTV_HW_I2C_IR_RX_ADAPTEC:

drivers/media/usb/hdpvr/hdpvr-i2c.c

@@ -55,7 +55,7 @@ struct i2c_client *hdpvr_register_ir_rx_i2c(struct hdpvr_device *dev)
 	/* Our default information for ir-kbd-i2c.c to use */
 	init_data->ir_codes = RC_MAP_HAUPPAUGE;
 	init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
-	init_data->type = RC_BIT_RC5;
+	init_data->type = RC_BIT_RC5 | RC_BIT_RC6_MCE | RC_BIT_RC6_6A_32;
 	init_data->name = "HD-PVR";
 	init_data->polling_interval = 405; /* ms, duplicated from Windows */
 	hdpvr_ir_rx_i2c_board_info.platform_data = init_data;

drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c

@@ -596,7 +596,8 @@ static void pvr2_i2c_register_ir(struct pvr2_hdw *hdw)
 	case PVR2_IR_SCHEME_24XXX_MCE: /* 24xxx MCE device */
 		init_data->ir_codes              = RC_MAP_HAUPPAUGE;
 		init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
-		init_data->type                  = RC_BIT_RC5;
+		init_data->type                  = RC_BIT_RC5 | RC_BIT_RC6_MCE |
+							RC_BIT_RC6_6A_32;
 		init_data->name                  = hdw->hdw_desc->description;
 		/* IR Receiver */
 		info.addr          = 0x71;