ARM: dts: imx: Use generic node names for Zii dts

The devicetree specification recommends using generic node names.

Some Zii dts files already follow such recommendation, but some don't,
so use generic node names for consistency among the Zii dts files.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/vf610-zii-cfu1.dts

@@ -94,7 +94,7 @@ &dspi1 {
 	 */
 	status = "disabled";
 
-	m25p128@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p128", "jedec,spi-nor";
@@ -212,7 +212,7 @@ &i2c0 {
 	pinctrl-0 = <&pinctrl_i2c0>;
 	status = "okay";
 
-	pca9554@22 {
+	io-expander@22 {
 		compatible = "nxp,pca9554";
 		reg = <0x22>;
 		gpio-controller;
@@ -223,13 +223,13 @@ lm75@48 {
 		reg = <0x48>;
 	};
 
-	at24c04@52 {
+	eeprom@52 {
 		compatible = "atmel,24c04";
 		reg = <0x52>;
 		label = "nvm";
 	};
 
-	at24c04@54 {
+	eeprom@54 {
 		compatible = "atmel,24c04";
 		reg = <0x54>;
 		label = "nameplate";

arch/arm/boot/dts/vf610-zii-dev-rev-b.dts

@@ -299,7 +299,7 @@ spi0 {
 			     &gpio1  8 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <2>;
 
-		m25p128@0 {
+		flash@0 {
 			compatible = "m25p128", "jedec,spi-nor";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -328,7 +328,7 @@ &i2c0 {
 	pinctrl-0 = <&pinctrl_i2c0>;
 	status = "okay";
 
-	gpio5: pca9554@20 {
+	gpio5: io-expander@20 {
 		compatible = "nxp,pca9554";
 		reg = <0x20>;
 		gpio-controller;
@@ -336,7 +336,7 @@ gpio5: pca9554@20 {
 
 	};
 
-	gpio6: pca9554@22 {
+	gpio6: io-expander@22 {
 		compatible = "nxp,pca9554";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pca9554_22>;
@@ -369,7 +369,7 @@ i2c@0 {
 			#size-cells = <0>;
 			reg = <0>;
 
-			sfp1: at24c04@50 {
+			sfp1: eeprom@50 {
 				compatible = "atmel,24c02";
 				reg = <0x50>;
 			};
@@ -380,7 +380,7 @@ i2c@1 {
 			#size-cells = <0>;
 			reg = <1>;
 
-			sfp2: at24c04@50 {
+			sfp2: eeprom@50 {
 				compatible = "atmel,24c02";
 				reg = <0x50>;
 			};
@@ -391,7 +391,7 @@ i2c@2 {
 			#size-cells = <0>;
 			reg = <2>;
 
-			sfp3: at24c04@50 {
+			sfp3: eeprom@50 {
 				compatible = "atmel,24c02";
 				reg = <0x50>;
 			};
@@ -402,7 +402,7 @@ i2c@3 {
 			#size-cells = <0>;
 			reg = <3>;
 
-			sfp4: at24c04@50 {
+			sfp4: eeprom@50 {
 				compatible = "atmel,24c02";
 				reg = <0x50>;
 			};

arch/arm/boot/dts/vf610-zii-dev-rev-c.dts

@@ -238,7 +238,7 @@ &dspi0 {
 	status = "okay";
 	spi-num-chipselects = <2>;
 
-	m25p128@0 {
+	flash@0 {
 		compatible = "m25p128", "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -274,7 +274,7 @@ &i2c0 {
 	 *    P1 - WE2_CMD
 	 *    P2 - WE2_CLK
 	 */
-	gpio5: pca9557@18 {
+	gpio5: io-expander@18 {
 		compatible = "nxp,pca9557";
 		reg = <0x18>;
 		gpio-controller;
@@ -322,7 +322,7 @@ gpio6: sx1503@20 {
 	 *     IO0 - WE1_CLK
 	 *     IO1 - WE1_CMD
 	 */
-	gpio7: pca9554@22 {
+	gpio7: io-expander@22 {
 		compatible = "nxp,pca9554";
 		reg = <0x22>;
 		gpio-controller;
@@ -332,7 +332,7 @@ gpio7: pca9554@22 {
 };
 
 &i2c1 {
-	at24mac602@50 {
+	eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
 		read-only;

arch/arm/boot/dts/vf610-zii-dev.dtsi

@@ -147,12 +147,12 @@ lm75@48 {
 		reg = <0x48>;
 	};
 
-	at24c04@50 {
+	eeprom@50 {
 		compatible = "atmel,24c04";
 		reg = <0x50>;
 	};
 
-	at24c04@52 {
+	eeprom@52 {
 		compatible = "atmel,24c04";
 		reg = <0x52>;
 	};

arch/arm/boot/dts/vf610-zii-scu4-aib.dts

@@ -505,14 +505,14 @@ &i2c0 {
 	pinctrl-0 = <&pinctrl_i2c0>;
 	status = "okay";
 
-	gpio5: pca9554@20 {
+	gpio5: io-expander@20 {
 		compatible = "nxp,pca9554";
 		reg = <0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpio6: pca9554@22 {
+	gpio6: io-expander@22 {
 		compatible = "nxp,pca9554";
 		reg = <0x22>;
 		gpio-controller;
@@ -524,12 +524,12 @@ lm75@48 {
 		reg = <0x48>;
 	};
 
-	at24c04@50 {
+	eeprom@50 {
 		compatible = "atmel,24c04";
 		reg = <0x50>;
 	};
 
-	at24c04@52 {
+	eeprom@52 {
 		compatible = "atmel,24c04";
 		reg = <0x52>;
 	};
@@ -577,7 +577,7 @@ lm75@4f {
 		reg = <0x4f>;
 	};
 
-	gpio7: pca9555@23 {
+	gpio7: io-expander@23 {
 		compatible = "nxp,pca9555";
 		gpio-controller;
 		#gpio-cells = <2>;

arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts

@@ -69,7 +69,7 @@ &dspi1 {
 	 */
 	status = "disabled";
 
-	m25p128@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p128", "jedec,spi-nor";
@@ -194,7 +194,7 @@ &i2c0 {
 	pinctrl-0 = <&pinctrl_i2c0>;
 	status = "okay";
 
-	gpio6: pca9505@22 {
+	gpio6: io-expander@22 {
 		compatible = "nxp,pca9554";
 		reg = <0x22>;
 		gpio-controller;
@@ -206,13 +206,13 @@ lm75@48 {
 		reg = <0x48>;
 	};
 
-	at24c04@50 {
+	eeprom@50 {
 		compatible = "atmel,24c04";
 		reg = <0x50>;
 		label = "nameplate";
 	};
 
-	at24c04@52 {
+	eeprom@52 {
 		compatible = "atmel,24c04";
 		reg = <0x52>;
 	};