Commit 00fe8b7a authored by Julia Lawall's avatar Julia Lawall Committed by Bartlomiej Zolnierkiewicz

ide: use DIV_ROUND_UP

The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) /
(d)) but is perhaps more readable.

An extract of the semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@haskernel@
@@

#include <linux/kernel.h>

@depends on haskernel@
expression n,d;
@@

(
- (n + d - 1) / d
+ DIV_ROUND_UP(n,d)
|
- (n + (d - 1)) / d
+ DIV_ROUND_UP(n,d)
)

@depends on haskernel@
expression n,d;
@@

- DIV_ROUND_UP((n),d)
+ DIV_ROUND_UP(n,d)

@depends on haskernel@
expression n,d;
@@

- DIV_ROUND_UP(n,(d))
+ DIV_ROUND_UP(n,d)
// </smpl>
Signed-off-by: default avatarJulia Lawall <julia@diku.dk>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 5e71d9c5
...@@ -96,11 +96,11 @@ static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev, ...@@ -96,11 +96,11 @@ static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
u16 val16; u16 val16;
/* DMA Data Setup */ /* DMA Data Setup */
t0 = (palm_bk3710_udmatimings[mode].cycletime + ide_palm_clk - 1) t0 = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].cycletime,
/ ide_palm_clk - 1; ide_palm_clk) - 1;
tenv = (20 + ide_palm_clk - 1) / ide_palm_clk - 1; tenv = DIV_ROUND_UP(20, ide_palm_clk) - 1;
trp = (palm_bk3710_udmatimings[mode].rptime + ide_palm_clk - 1) trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime,
/ ide_palm_clk - 1; ide_palm_clk) - 1;
/* udmatim Register */ /* udmatim Register */
val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0); val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0);
...@@ -141,8 +141,8 @@ static void palm_bk3710_setdmamode(void __iomem *base, unsigned int dev, ...@@ -141,8 +141,8 @@ static void palm_bk3710_setdmamode(void __iomem *base, unsigned int dev,
cycletime = max_t(int, t->cycle, min_cycle); cycletime = max_t(int, t->cycle, min_cycle);
/* DMA Data Setup */ /* DMA Data Setup */
t0 = (cycletime + ide_palm_clk - 1) / ide_palm_clk; t0 = DIV_ROUND_UP(cycletime, ide_palm_clk);
td = (t->active + ide_palm_clk - 1) / ide_palm_clk; td = DIV_ROUND_UP(t->active, ide_palm_clk);
tkw = t0 - td - 1; tkw = t0 - td - 1;
td -= 1; td -= 1;
...@@ -168,9 +168,9 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, ...@@ -168,9 +168,9 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate,
struct ide_timing *t; struct ide_timing *t;
/* PIO Data Setup */ /* PIO Data Setup */
t0 = (cycletime + ide_palm_clk - 1) / ide_palm_clk; t0 = DIV_ROUND_UP(cycletime, ide_palm_clk);
t2 = (ide_timing_find_mode(XFER_PIO_0 + mode)->active + t2 = DIV_ROUND_UP(ide_timing_find_mode(XFER_PIO_0 + mode)->active,
ide_palm_clk - 1) / ide_palm_clk; ide_palm_clk);
t2i = t0 - t2 - 1; t2i = t0 - t2 - 1;
t2 -= 1; t2 -= 1;
...@@ -192,8 +192,8 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, ...@@ -192,8 +192,8 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate,
/* TASKFILE Setup */ /* TASKFILE Setup */
t = ide_timing_find_mode(XFER_PIO_0 + mode); t = ide_timing_find_mode(XFER_PIO_0 + mode);
t0 = (t->cyc8b + ide_palm_clk - 1) / ide_palm_clk; t0 = DIV_ROUND_UP(t->cyc8b, ide_palm_clk);
t2 = (t->act8b + ide_palm_clk - 1) / ide_palm_clk; t2 = DIV_ROUND_UP(t->act8b, ide_palm_clk);
t2i = t0 - t2 - 1; t2i = t0 - t2 - 1;
t2 -= 1; t2 -= 1;
......
...@@ -561,15 +561,15 @@ static void cmd640_set_mode(ide_drive_t *drive, unsigned int index, ...@@ -561,15 +561,15 @@ static void cmd640_set_mode(ide_drive_t *drive, unsigned int index,
active_time = ide_pio_timings[pio_mode].active_time; active_time = ide_pio_timings[pio_mode].active_time;
recovery_time = cycle_time - (setup_time + active_time); recovery_time = cycle_time - (setup_time + active_time);
clock_time = 1000 / bus_speed; clock_time = 1000 / bus_speed;
cycle_count = (cycle_time + clock_time - 1) / clock_time; cycle_count = DIV_ROUND_UP(cycle_time, clock_time);
setup_count = (setup_time + clock_time - 1) / clock_time; setup_count = DIV_ROUND_UP(setup_time, clock_time);
active_count = (active_time + clock_time - 1) / clock_time; active_count = DIV_ROUND_UP(active_time, clock_time);
if (active_count < 2) if (active_count < 2)
active_count = 2; /* minimum allowed by cmd640 */ active_count = 2; /* minimum allowed by cmd640 */
recovery_count = (recovery_time + clock_time - 1) / clock_time; recovery_count = DIV_ROUND_UP(recovery_time, clock_time);
recovery_count2 = cycle_count - (setup_count + active_count); recovery_count2 = cycle_count - (setup_count + active_count);
if (recovery_count2 > recovery_count) if (recovery_count2 > recovery_count)
recovery_count = recovery_count2; recovery_count = recovery_count2;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment