Skip to content

L
linux
Commit 0110c443 authored by Bill Pemberton's avatar Bill Pemberton Committed by Greg Kroah-Hartman
Browse files
Options

Staging: comedi: remove C99 comments in APCI1710_Pwm.c 

Signed-off-by: default avatarBill Pemberton <wfp5p@virginia.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent c47375f3
Hide whitespace changes
Inline Side-by-side
Showing with 424 additions and 424 deletions
drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c
View file @ 0110c443
......@@ -79,29 +79,29 @@ int i_APCI1710_InsnConfigPWM(struct comedi_device * dev, struct comedi_subdevice
switch (b_ConfigType) {
case APCI1710_PWM_INIT:
i_ReturnValue = i_APCI1710_InitPWM(dev, (unsigned char) CR_AREF(insn->chanspec), // b_ModulNbr
(unsigned char) data[0], //b_PWM
(unsigned char) data[1], // b_ClockSelection
(unsigned char) data[2], // b_TimingUnit
(unsigned int) data[3], //ul_LowTiming
(unsigned int) data[4], //ul_HighTiming
(unsigned int *) & data[0], //pul_RealLowTiming
(unsigned int *) & data[1] //pul_RealHighTiming
i_ReturnValue = i_APCI1710_InitPWM(dev, (unsigned char) CR_AREF(insn->chanspec), /* b_ModulNbr */
(unsigned char) data[0], /* b_PWM */
(unsigned char) data[1], /* b_ClockSelection */
(unsigned char) data[2], /* b_TimingUnit */
(unsigned int) data[3], /* ul_LowTiming */
(unsigned int) data[4], /* ul_HighTiming */
(unsigned int *) & data[0], /* pul_RealLowTiming */
(unsigned int *) & data[1] /* pul_RealHighTiming */
);
break;
case APCI1710_PWM_GETINITDATA:
i_ReturnValue = i_APCI1710_GetPWMInitialisation(dev, (unsigned char) CR_AREF(insn->chanspec), // b_ModulNbr
(unsigned char) data[0], //b_PWM
(unsigned char *) & data[0], //pb_TimingUnit
(unsigned int *) & data[1], //pul_LowTiming
(unsigned int *) & data[2], //pul_HighTiming
(unsigned char *) & data[3], // pb_StartLevel
(unsigned char *) & data[4], // pb_StopMode
(unsigned char *) & data[5], // pb_StopLevel
(unsigned char *) & data[6], // pb_ExternGate
(unsigned char *) & data[7], // pb_InterruptEnable
(unsigned char *) & data[8] // pb_Enable
i_ReturnValue = i_APCI1710_GetPWMInitialisation(dev, (unsigned char) CR_AREF(insn->chanspec), /* b_ModulNbr */
(unsigned char) data[0], /* b_PWM */
(unsigned char *) & data[0], /* pb_TimingUnit */
(unsigned int *) & data[1], /* pul_LowTiming */
(unsigned int *) & data[2], /* pul_HighTiming */
(unsigned char *) & data[3], /* pb_StartLevel */
(unsigned char *) & data[4], /* pb_StopMode */
(unsigned char *) & data[5], /* pb_StopLevel */
(unsigned char *) & data[6], /* pb_ExternGate */
(unsigned char *) & data[7], /* pb_InterruptEnable */
(unsigned char *) & data[8] /* pb_Enable */
);
break;
......@@ -200,33 +200,33 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
/**************************/
if (b_ModulNbr < 4) {
/***************/
/***************/
/* Test if PWM */
/***************/
/***************/
if ((devpriv->s_BoardInfos.
dw_MolduleConfiguration[b_ModulNbr] &
0xFFFF0000UL) == APCI1710_PWM) {
/**************************/
/**************************/
/* Test the PWM selection */
/**************************/
/**************************/
if (b_PWM <= 1) {
/******************/
/******************/
/* Test the clock */
/******************/
/******************/
if ((b_ClockSelection == APCI1710_30MHZ) ||
(b_ClockSelection == APCI1710_33MHZ) ||
(b_ClockSelection == APCI1710_40MHZ)) {
/************************/
/************************/
/* Test the timing unit */
/************************/
/************************/
if (b_TimingUnit <= 4) {
/*********************************/
/*********************************/
/* Test the low timing selection */
/*********************************/
/*********************************/
if (((b_ClockSelection ==
APCI1710_30MHZ)
......@@ -361,34 +361,34 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
&& (ul_LowTiming
<=
7UL))) {
/**********************************/
/**********************************/
/* Test the High timing selection */
/**********************************/
/**********************************/
if (((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 266) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571230650UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571230UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 9UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 242) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 519691043UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 519691UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 520UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 8UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 200) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429496729UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429496UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 7UL))) {
/**************************/
/**************************/
/* Test the board version */
/**************************/
/**************************/
if (((b_ClockSelection == APCI1710_40MHZ) && (devpriv->s_BoardInfos.b_BoardVersion > 0)) || (b_ClockSelection != APCI1710_40MHZ)) {
/************************************/
/************************************/
/* Calculate the low division fator */
/************************************/
/************************************/
fpu_begin
();
switch (b_TimingUnit) {
/******/
/******/
/* ns */
/******/
/******/
case 0:
/******************/
/******************/
/* Timer 0 factor */
/******************/
/******************/
ul_LowTimerValue
=
......@@ -397,9 +397,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
*
(0.00025 * b_ClockSelection));
/*******************/
/*******************/
/* Round the value */
/*******************/
/*******************/
if ((double)((double)ul_LowTiming * (0.00025 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) {
ul_LowTimerValue
......@@ -409,9 +409,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
1;
}
/*****************************/
/*****************************/
/* Calculate the real timing */
/*****************************/
/*****************************/
*pul_RealLowTiming
=
......@@ -461,15 +461,15 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
break;
/******/
/******/
/* æs */
/******/
/******/
case 1:
/******************/
/******************/
/* Timer 0 factor */
/******************/
/******************/
ul_LowTimerValue
=
......@@ -478,9 +478,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
*
(0.25 * b_ClockSelection));
/*******************/
/*******************/
/* Round the value */
/*******************/
/*******************/
if ((double)((double)ul_LowTiming * (0.25 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) {
ul_LowTimerValue
......@@ -490,9 +490,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
1;
}
/*****************************/
/*****************************/
/* Calculate the real timing */
/*****************************/
/*****************************/
*pul_RealLowTiming
=
......@@ -544,15 +544,15 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
break;
/******/
/******/
/* ms */
/******/
/******/
case 2:
/******************/
/******************/
/* Timer 0 factor */
/******************/
/******************/
ul_LowTimerValue
=
......@@ -562,9 +562,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
*
b_ClockSelection);
/*******************/
/*******************/
/* Round the value */
/*******************/
/*******************/
if ((double)((double)ul_LowTiming * (250.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) {
ul_LowTimerValue
......@@ -574,9 +574,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
1;
}
/*****************************/
/*****************************/
/* Calculate the real timing */
/*****************************/
/*****************************/
*pul_RealLowTiming
=
......@@ -626,14 +626,14 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
break;
/*****/
/*****/
/* s */
/*****/
/*****/
case 3:
/******************/
/******************/
/* Timer 0 factor */
/******************/
/******************/
ul_LowTimerValue
=
......@@ -644,9 +644,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
*
b_ClockSelection));
/*******************/
/*******************/
/* Round the value */
/*******************/
/*******************/
if ((double)((double)ul_LowTiming * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) {
ul_LowTimerValue
......@@ -656,9 +656,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
1;
}
/*****************************/
/*****************************/
/* Calculate the real timing */
/*****************************/
/*****************************/
*pul_RealLowTiming
=
......@@ -711,15 +711,15 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
break;
/******/
/******/
/* mn */
/******/
/******/
case 4:
/******************/
/******************/
/* Timer 0 factor */
/******************/
/******************/
ul_LowTimerValue
=
......@@ -733,9 +733,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
*
b_ClockSelection));
/*******************/
/*******************/
/* Round the value */
/*******************/
/*******************/
if ((double)((double)(ul_LowTiming * 60.0) * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) {
ul_LowTimerValue
......@@ -745,9 +745,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
1;
}
/*****************************/
/*****************************/
/* Calculate the real timing */
/*****************************/
/*****************************/
*pul_RealLowTiming
=
......@@ -806,20 +806,20 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
break;
}
/*************************************/
/*************************************/
/* Calculate the high division fator */
/*************************************/
/*************************************/
switch (b_TimingUnit) {
/******/
/******/
/* ns */
/******/
/******/
case 0:
/******************/
/******************/
/* Timer 0 factor */
/******************/
/******************/
ul_HighTimerValue
=
......@@ -828,9 +828,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
*
(0.00025 * b_ClockSelection));
/*******************/
/*******************/
/* Round the value */
/*******************/
/*******************/
if ((double)((double)ul_HighTiming * (0.00025 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) {
ul_HighTimerValue
......@@ -840,9 +840,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
1;
}
/*****************************/
/*****************************/
/* Calculate the real timing */
/*****************************/
/*****************************/
*pul_RealHighTiming
=
......@@ -892,15 +892,15 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
break;
/******/
/******/
/* æs */
/******/
/******/
case 1:
/******************/
/******************/
/* Timer 0 factor */
/******************/
/******************/
ul_HighTimerValue
=
......@@ -909,9 +909,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
*
(0.25 * b_ClockSelection));
/*******************/
/*******************/
/* Round the value */
/*******************/
/*******************/
if ((double)((double)ul_HighTiming * (0.25 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) {
ul_HighTimerValue
......@@ -921,9 +921,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
1;
}
/*****************************/
/*****************************/
/* Calculate the real timing */
/*****************************/
/*****************************/
*pul_RealHighTiming
=
......@@ -975,15 +975,15 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
break;
/******/
/******/
/* ms */
/******/
/******/
case 2:
/******************/
/******************/
/* Timer 0 factor */
/******************/
/******************/
ul_HighTimerValue
=
......@@ -993,9 +993,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
*
b_ClockSelection);
/*******************/
/*******************/
/* Round the value */
/*******************/
/*******************/
if ((double)((double)ul_HighTiming * (250.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) {
ul_HighTimerValue
......@@ -1005,9 +1005,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
1;
}
/*****************************/
/*****************************/
/* Calculate the real timing */
/*****************************/
/*****************************/
*pul_RealHighTiming
=
......@@ -1057,15 +1057,15 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
break;
/*****/
/*****/
/* s */
/*****/
/*****/
case 3:
/******************/
/******************/
/* Timer 0 factor */
/******************/
/******************/
ul_HighTimerValue
=
......@@ -1076,9 +1076,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
*
b_ClockSelection));
/*******************/
/*******************/
/* Round the value */
/*******************/
/*******************/
if ((double)((double)ul_HighTiming * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) {
ul_HighTimerValue
......@@ -1088,9 +1088,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
1;
}
/*****************************/
/*****************************/
/* Calculate the real timing */
/*****************************/
/*****************************/
*pul_RealHighTiming
=
......@@ -1143,15 +1143,15 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
break;
/******/
/******/
/* mn */
/******/
/******/
case 4:
/******************/
/******************/
/* Timer 0 factor */
/******************/
/******************/
ul_HighTimerValue
=
......@@ -1165,9 +1165,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
*
b_ClockSelection));
/*******************/
/*******************/
/* Round the value */
/*******************/
/*******************/
if ((double)((double)(ul_HighTiming * 60.0) * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) {
ul_HighTimerValue
......@@ -1177,9 +1177,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
1;
}
/*****************************/
/*****************************/
/* Calculate the real timing */
/*****************************/
/*****************************/
*pul_RealHighTiming
=
......@@ -1239,9 +1239,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
}
fpu_end();
/****************************/
/****************************/
/* Save the clock selection */
/****************************/
/****************************/
devpriv->
s_ModuleInfo
......@@ -1251,9 +1251,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
=
b_ClockSelection;
/************************/
/************************/
/* Save the timing unit */
/************************/
/************************/
devpriv->
s_ModuleInfo
......@@ -1265,9 +1265,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
=
b_TimingUnit;
/****************************/
/****************************/
/* Save the low base timing */
/****************************/
/****************************/
devpriv->
s_ModuleInfo
......@@ -1289,9 +1289,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
=
*pul_RealLowTiming;
/****************************/
/****************************/
/* Save the high base timing */
/****************************/
/****************************/
devpriv->
s_ModuleInfo
......@@ -1313,21 +1313,21 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
=
*pul_RealHighTiming;
/************************/
/************************/
/* Write the low timing */
/************************/
/************************/
outl(ul_LowTimerValue, devpriv->s_BoardInfos.ui_Address + 0 + (20 * b_PWM) + (64 * b_ModulNbr));
/*************************/
/*************************/
/* Write the high timing */
/*************************/
/*************************/
outl(ul_HighTimerValue, devpriv->s_BoardInfos.ui_Address + 4 + (20 * b_PWM) + (64 * b_ModulNbr));
/***************************/
/***************************/
/* Set the clock selection */
/***************************/
/***************************/
dw_Command
=
......@@ -1354,15 +1354,15 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
0x80;
}
/***************************/
/***************************/
/* Set the clock selection */
/***************************/
/***************************/
outl(dw_Command, devpriv->s_BoardInfos.ui_Address + 8 + (20 * b_PWM) + (64 * b_ModulNbr));
/*************/
/*************/
/* PWM init. */
/*************/
/*************/
devpriv->
s_ModuleInfo
[b_ModulNbr].
......@@ -1373,65 +1373,65 @@ int i_APCI1710_InitPWM(struct comedi_device * dev,
=
1;
} else {
/***************************************************/
/***************************************************/
/* You can not used the 40MHz clock selection with */
/* this board */
/***************************************************/
/***************************************************/
DPRINTK("You can not used the 40MHz clock selection with this board\n");
i_ReturnValue
=
-9;
}
} else {
/***************************************/
/***************************************/
/* High base timing selection is wrong */
/***************************************/
/***************************************/
DPRINTK("High base timing selection is wrong\n");
i_ReturnValue =
-8;
}
} else {
/**************************************/
/**************************************/
/* Low base timing selection is wrong */
/**************************************/
/**************************************/
DPRINTK("Low base timing selection is wrong\n");
i_ReturnValue = -7;
}
} // if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4))
} /* if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) */
else {
/**********************************/
/**********************************/
/* Timing unit selection is wrong */
/**********************************/
/**********************************/
DPRINTK("Timing unit selection is wrong\n");
i_ReturnValue = -6;
} // if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4))
} // if ((b_ClockSelection == APCI1710_30MHZ) || (b_ClockSelection == APCI1710_33MHZ) || (b_ClockSelection == APCI1710_40MHZ))
} /* if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) */
} /* if ((b_ClockSelection == APCI1710_30MHZ) || (b_ClockSelection == APCI1710_33MHZ) || (b_ClockSelection == APCI1710_40MHZ)) */
else {
/*******************************/
/*******************************/
/* The selected clock is wrong */
/*******************************/
/*******************************/
DPRINTK("The selected clock is wrong\n");
i_ReturnValue = -5;
} // if ((b_ClockSelection == APCI1710_30MHZ) || (b_ClockSelection == APCI1710_33MHZ) || (b_ClockSelection == APCI1710_40MHZ))
} // if (b_PWM >= 0 && b_PWM <= 1)
} /* if ((b_ClockSelection == APCI1710_30MHZ) || (b_ClockSelection == APCI1710_33MHZ) || (b_ClockSelection == APCI1710_40MHZ)) */
} /* if (b_PWM >= 0 && b_PWM <= 1) */
else {
/******************************/
/******************************/
/* Tor PWM selection is wrong */
/******************************/
/******************************/
DPRINTK("Tor PWM selection is wrong\n");
i_ReturnValue = -4;
} // if (b_PWM >= 0 && b_PWM <= 1)
} /* if (b_PWM >= 0 && b_PWM <= 1) */
} else {
/**********************************/
/**********************************/
/* The module is not a PWM module */
/**********************************/
/**********************************/
DPRINTK("The module is not a PWM module\n");
i_ReturnValue = -3;
}
} else {
/***********************/
/***********************/
/* Module number error */
/***********************/
/***********************/
DPRINTK("Module number error\n");
i_ReturnValue = -2;
}
......@@ -1554,48 +1554,48 @@ int i_APCI1710_GetPWMInitialisation(struct comedi_device * dev,
/**************************/
if (b_ModulNbr < 4) {
/***************/
/***************/
/* Test if PWM */
/***************/
/***************/
if ((devpriv->s_BoardInfos.
dw_MolduleConfiguration[b_ModulNbr] &
0xFFFF0000UL) == APCI1710_PWM) {
/**************************/
/**************************/
/* Test the PWM selection */
/**************************/
/**************************/
if (b_PWM <= 1) {
/***************************/
/***************************/
/* Test if PWM initialised */
/***************************/
/***************************/
dw_Status = inl(devpriv->s_BoardInfos.
ui_Address + 12 + (20 * b_PWM) +
(64 * b_ModulNbr));
if (dw_Status & 0x10) {
/***********************/
/***********************/
/* Read the low timing */
/***********************/
/***********************/
*pul_LowTiming =
inl(devpriv->s_BoardInfos.
ui_Address + 0 + (20 * b_PWM) +
(64 * b_ModulNbr));
/************************/
/************************/
/* Read the high timing */
/************************/
/************************/
*pul_HighTiming =
inl(devpriv->s_BoardInfos.
ui_Address + 4 + (20 * b_PWM) +
(64 * b_ModulNbr));
/********************/
/********************/
/* Read the command */
/********************/
/********************/
dw_Command = inl(devpriv->s_BoardInfos.
ui_Address + 8 + (20 * b_PWM) +
......@@ -1619,9 +1619,9 @@ int i_APCI1710_GetPWMInitialisation(struct comedi_device * dev,
2) & 1);
}
/********************/
/********************/
/* Read the command */
/********************/
/********************/
dw_Command = inl(devpriv->s_BoardInfos.
ui_Address + 8 + (20 * b_PWM) +
......@@ -1634,33 +1634,33 @@ int i_APCI1710_GetPWMInitialisation(struct comedi_device * dev,
s_ModuleInfo[b_ModulNbr].
s_PWMModuleInfo.
s_PWMInfo[b_PWM].b_TimingUnit;
} // if (dw_Status & 0x10)
} /* if (dw_Status & 0x10) */
else {
/***********************/
/***********************/
/* PWM not initialised */
/***********************/
/***********************/
DPRINTK("PWM not initialised\n");
i_ReturnValue = -5;
} // if (dw_Status & 0x10)
} // if (b_PWM >= 0 && b_PWM <= 1)
} /* if (dw_Status & 0x10) */
} /* if (b_PWM >= 0 && b_PWM <= 1) */
else {
/******************************/
/******************************/
/* Tor PWM selection is wrong */
/******************************/
/******************************/
DPRINTK("Tor PWM selection is wrong\n");
i_ReturnValue = -4;
} // if (b_PWM >= 0 && b_PWM <= 1)
} /* if (b_PWM >= 0 && b_PWM <= 1) */
} else {
/**********************************/
/**********************************/
/* The module is not a PWM module */
/**********************************/
/**********************************/
DPRINTK("The module is not a PWM module\n");
i_ReturnValue = -3;
}
} else {
/***********************/
/***********************/
/* Module number error */
/***********************/
/***********************/
DPRINTK("Module number error\n");
i_ReturnValue = -2;
}
......@@ -1817,66 +1817,66 @@ int i_APCI1710_EnablePWM(struct comedi_device * dev,
unsigned int dw_Status;
unsigned int dw_Command;
devpriv->tsk_Current = current; // Save the current process task structure
devpriv->tsk_Current = current; /* Save the current process task structure */
/**************************/
/* Test the module number */
/**************************/
if (b_ModulNbr < 4) {
/***************/
/***************/
/* Test if PWM */
/***************/
/***************/
if ((devpriv->s_BoardInfos.
dw_MolduleConfiguration[b_ModulNbr] &
0xFFFF0000UL) == APCI1710_PWM) {
/**************************/
/**************************/
/* Test the PWM selection */
/**************************/
/**************************/
if (b_PWM <= 1) {
/***************************/
/***************************/
/* Test if PWM initialised */
/***************************/
/***************************/
dw_Status = inl(devpriv->s_BoardInfos.
ui_Address + 12 + (20 * b_PWM) +
(64 * b_ModulNbr));
if (dw_Status & 0x10) {
/**********************************/
/**********************************/
/* Test the start level selection */
/**********************************/
/**********************************/
if (b_StartLevel <= 1) {
/**********************/
/**********************/
/* Test the stop mode */
/**********************/
/**********************/
if (b_StopMode <= 1) {
/***********************/
/***********************/
/* Test the stop level */
/***********************/
/***********************/
if (b_StopLevel <= 2) {
/*****************************/
/*****************************/
/* Test the extern gate mode */
/*****************************/
/*****************************/
if (b_ExternGate
<= 1) {
/*****************************/
/*****************************/
/* Test the interrupt action */
/*****************************/
/*****************************/
if (b_InterruptEnable == APCI1710_ENABLE || b_InterruptEnable == APCI1710_DISABLE) {
/******************************************/
/******************************************/
/* Test if interrupt function initialised */
/******************************************/
/******************************************/
/********************/
/********************/
/* Read the command */
/********************/
/********************/
dw_Command
=
......@@ -1895,9 +1895,9 @@ int i_APCI1710_EnablePWM(struct comedi_device * dev,
&
0x80;
/********************/
/********************/
/* Make the command */
/********************/
/********************/
dw_Command
=
......@@ -1943,88 +1943,88 @@ int i_APCI1710_EnablePWM(struct comedi_device * dev,
=
b_InterruptEnable;
/*******************/
/*******************/
/* Set the command */
/*******************/
/*******************/
outl(dw_Command, devpriv->s_BoardInfos.ui_Address + 8 + (20 * b_PWM) + (64 * b_ModulNbr));
/******************/
/******************/
/* Enable the PWM */
/******************/
/******************/
outl(1, devpriv->s_BoardInfos.ui_Address + 12 + (20 * b_PWM) + (64 * b_ModulNbr));
} // if (b_InterruptEnable == APCI1710_ENABLE || b_InterruptEnable == APCI1710_DISABLE)
} /* if (b_InterruptEnable == APCI1710_ENABLE || b_InterruptEnable == APCI1710_DISABLE) */
else {
/********************************/
/********************************/
/* Interrupt parameter is wrong */
/********************************/
/********************************/
DPRINTK("Interrupt parameter is wrong\n");
i_ReturnValue
=
-10;
} // if (b_InterruptEnable == APCI1710_ENABLE || b_InterruptEnable == APCI1710_DISABLE)
} // if (b_ExternGate >= 0 && b_ExternGate <= 1)
} /* if (b_InterruptEnable == APCI1710_ENABLE || b_InterruptEnable == APCI1710_DISABLE) */
} /* if (b_ExternGate >= 0 && b_ExternGate <= 1) */
else {
/*****************************************/
/*****************************************/
/* Extern gate signal selection is wrong */
/*****************************************/
/*****************************************/
DPRINTK("Extern gate signal selection is wrong\n");
i_ReturnValue
=
-9;
} // if (b_ExternGate >= 0 && b_ExternGate <= 1)
} // if (b_StopLevel >= 0 && b_StopLevel <= 2)
} /* if (b_ExternGate >= 0 && b_ExternGate <= 1) */
} /* if (b_StopLevel >= 0 && b_StopLevel <= 2) */
else {
/*************************************/
/*************************************/
/* PWM stop level selection is wrong */
/*************************************/
/*************************************/
DPRINTK("PWM stop level selection is wrong\n");
i_ReturnValue =
-8;
} // if (b_StopLevel >= 0 && b_StopLevel <= 2)
} // if (b_StopMode >= 0 && b_StopMode <= 1)
} /* if (b_StopLevel >= 0 && b_StopLevel <= 2) */
} /* if (b_StopMode >= 0 && b_StopMode <= 1) */
else {
/************************************/
/************************************/
/* PWM stop mode selection is wrong */
/************************************/
/************************************/
DPRINTK("PWM stop mode selection is wrong\n");
i_ReturnValue = -7;
} // if (b_StopMode >= 0 && b_StopMode <= 1)
} // if (b_StartLevel >= 0 && b_StartLevel <= 1)
} /* if (b_StopMode >= 0 && b_StopMode <= 1) */
} /* if (b_StartLevel >= 0 && b_StartLevel <= 1) */
else {
/**************************************/
/**************************************/
/* PWM start level selection is wrong */
/**************************************/
/**************************************/
DPRINTK("PWM start level selection is wrong\n");
i_ReturnValue = -6;
} // if (b_StartLevel >= 0 && b_StartLevel <= 1)
} // if (dw_Status & 0x10)
} /* if (b_StartLevel >= 0 && b_StartLevel <= 1) */
} /* if (dw_Status & 0x10) */
else {
/***********************/
/***********************/
/* PWM not initialised */
/***********************/
/***********************/
DPRINTK("PWM not initialised\n");
i_ReturnValue = -5;
} // if (dw_Status & 0x10)
} // if (b_PWM >= 0 && b_PWM <= 1)
} /* if (dw_Status & 0x10) */
} /* if (b_PWM >= 0 && b_PWM <= 1) */
else {
/******************************/
/******************************/
/* Tor PWM selection is wrong */
/******************************/
/******************************/
DPRINTK("Tor PWM selection is wrong\n");
i_ReturnValue = -4;
} // if (b_PWM >= 0 && b_PWM <= 1)
} /* if (b_PWM >= 0 && b_PWM <= 1) */
} else {
/**********************************/
/**********************************/
/* The module is not a PWM module */
/**********************************/
/**********************************/
DPRINTK("The module is not a PWM module\n");
i_ReturnValue = -3;
}
} else {
/***********************/
/***********************/
/* Module number error */
/***********************/
/***********************/
DPRINTK("Module number error\n");
i_ReturnValue = -2;
}
......@@ -2072,74 +2072,74 @@ int i_APCI1710_DisablePWM(struct comedi_device * dev, unsigned char b_ModulNbr,
/**************************/
if (b_ModulNbr < 4) {
/***************/
/***************/
/* Test if PWM */
/***************/
/***************/
if ((devpriv->s_BoardInfos.
dw_MolduleConfiguration[b_ModulNbr] &
0xFFFF0000UL) == APCI1710_PWM) {
/**************************/
/**************************/
/* Test the PWM selection */
/**************************/
/**************************/
if (b_PWM <= 1) {
/***************************/
/***************************/
/* Test if PWM initialised */
/***************************/
/***************************/
dw_Status = inl(devpriv->s_BoardInfos.
ui_Address + 12 + (20 * b_PWM) +
(64 * b_ModulNbr));
if (dw_Status & 0x10) {
/***********************/
/***********************/
/* Test if PWM enabled */
/***********************/
/***********************/
if (dw_Status & 0x1) {
/*******************/
/*******************/
/* Disable the PWM */
/*******************/
/*******************/
outl(0, devpriv->s_BoardInfos.
ui_Address + 12 +
(20 * b_PWM) +
(64 * b_ModulNbr));
} // if (dw_Status & 0x1)
} /* if (dw_Status & 0x1) */
else {
/*******************/
/*******************/
/* PWM not enabled */
/*******************/
/*******************/
DPRINTK("PWM not enabled\n");
i_ReturnValue = -6;
} // if (dw_Status & 0x1)
} // if (dw_Status & 0x10)
} /* if (dw_Status & 0x1) */
} /* if (dw_Status & 0x10) */
else {
/***********************/
/***********************/
/* PWM not initialised */
/***********************/
/***********************/
DPRINTK(" PWM not initialised\n");
i_ReturnValue = -5;
} // if (dw_Status & 0x10)
} // if (b_PWM >= 0 && b_PWM <= 1)
} /* if (dw_Status & 0x10) */
} /* if (b_PWM >= 0 && b_PWM <= 1) */
else {
/******************************/
/******************************/
/* Tor PWM selection is wrong */
/******************************/
/******************************/
DPRINTK("Tor PWM selection is wrong\n");
i_ReturnValue = -4;
} // if (b_PWM >= 0 && b_PWM <= 1)
} /* if (b_PWM >= 0 && b_PWM <= 1) */
} else {
/**********************************/
/**********************************/
/* The module is not a PWM module */
/**********************************/
/**********************************/
DPRINTK("The module is not a PWM module\n");
i_ReturnValue = -3;
}
} else {
/***********************/
/***********************/
/* Module number error */
/***********************/
/***********************/
DPRINTK("Module number error\n");
i_ReturnValue = -2;
}
......@@ -2209,21 +2209,21 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
/**************************/
if (b_ModulNbr < 4) {
/***************/
/***************/
/* Test if PWM */
/***************/
/***************/
if ((devpriv->s_BoardInfos.
dw_MolduleConfiguration[b_ModulNbr] &
0xFFFF0000UL) == APCI1710_PWM) {
/**************************/
/**************************/
/* Test the PWM selection */
/**************************/
/**************************/
if (b_PWM <= 1) {
/***************************/
/***************************/
/* Test if PWM initialised */
/***************************/
/***************************/
dw_Status = inl(devpriv->s_BoardInfos.
ui_Address + 12 + (20 * b_PWM) +
......@@ -2235,14 +2235,14 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
s_PWMModuleInfo.
b_ClockSelection;
/************************/
/************************/
/* Test the timing unit */
/************************/
/************************/
if (b_TimingUnit <= 4) {
/*********************************/
/*********************************/
/* Test the low timing selection */
/*********************************/
/*********************************/
if (((b_ClockSelection ==
APCI1710_30MHZ)
......@@ -2377,26 +2377,26 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
&& (ul_LowTiming
<=
7UL))) {
/**********************************/
/**********************************/
/* Test the High timing selection */
/**********************************/
/**********************************/
if (((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 266) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571230650UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571230UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 9UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 242) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 519691043UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 519691UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 520UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 8UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 200) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429496729UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429496UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 7UL))) {
/************************************/
/************************************/
/* Calculate the low division fator */
/************************************/
/************************************/
fpu_begin();
switch (b_TimingUnit) {
/******/
/******/
/* ns */
/******/
/******/
case 0:
/******************/
/******************/
/* Timer 0 factor */
/******************/
/******************/
ul_LowTimerValue
=
......@@ -2405,9 +2405,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
*
(0.00025 * b_ClockSelection));
/*******************/
/*******************/
/* Round the value */
/*******************/
/*******************/
if ((double)((double)ul_LowTiming * (0.00025 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) {
ul_LowTimerValue
......@@ -2417,9 +2417,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
1;
}
/*****************************/
/*****************************/
/* Calculate the real timing */
/*****************************/
/*****************************/
ul_RealLowTiming
=
......@@ -2469,15 +2469,15 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
break;
/******/
/******/
/* æs */
/******/
/******/
case 1:
/******************/
/******************/
/* Timer 0 factor */
/******************/
/******************/
ul_LowTimerValue
=
......@@ -2486,9 +2486,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
*
(0.25 * b_ClockSelection));
/*******************/
/*******************/
/* Round the value */
/*******************/
/*******************/
if ((double)((double)ul_LowTiming * (0.25 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) {
ul_LowTimerValue
......@@ -2498,9 +2498,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
1;
}
/*****************************/
/*****************************/
/* Calculate the real timing */
/*****************************/
/*****************************/
ul_RealLowTiming
=
......@@ -2552,15 +2552,15 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
break;
/******/
/******/
/* ms */
/******/
/******/
case 2:
/******************/
/******************/
/* Timer 0 factor */
/******************/
/******************/
ul_LowTimerValue
=
......@@ -2570,9 +2570,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
*
b_ClockSelection);
/*******************/
/*******************/
/* Round the value */
/*******************/
/*******************/
if ((double)((double)ul_LowTiming * (250.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) {
ul_LowTimerValue
......@@ -2582,9 +2582,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
1;
}
/*****************************/
/*****************************/
/* Calculate the real timing */
/*****************************/
/*****************************/
ul_RealLowTiming
=
......@@ -2634,15 +2634,15 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
break;
/*****/
/*****/
/* s */
/*****/
/*****/
case 3:
/******************/
/******************/
/* Timer 0 factor */
/******************/
/******************/
ul_LowTimerValue
=
......@@ -2653,9 +2653,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
*
b_ClockSelection));
/*******************/
/*******************/
/* Round the value */
/*******************/
/*******************/
if ((double)((double)ul_LowTiming * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) {
ul_LowTimerValue
......@@ -2665,9 +2665,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
1;
}
/*****************************/
/*****************************/
/* Calculate the real timing */
/*****************************/
/*****************************/
ul_RealLowTiming
=
......@@ -2720,15 +2720,15 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
break;
/******/
/******/
/* mn */
/******/
/******/
case 4:
/******************/
/******************/
/* Timer 0 factor */
/******************/
/******************/
ul_LowTimerValue
=
......@@ -2742,9 +2742,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
*
b_ClockSelection));
/*******************/
/*******************/
/* Round the value */
/*******************/
/*******************/
if ((double)((double)(ul_LowTiming * 60.0) * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) {
ul_LowTimerValue
......@@ -2754,9 +2754,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
1;
}
/*****************************/
/*****************************/
/* Calculate the real timing */
/*****************************/
/*****************************/
ul_RealLowTiming
=
......@@ -2815,20 +2815,20 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
break;
}
/*************************************/
/*************************************/
/* Calculate the high division fator */
/*************************************/
/*************************************/
switch (b_TimingUnit) {
/******/
/******/
/* ns */
/******/
/******/
case 0:
/******************/
/******************/
/* Timer 0 factor */
/******************/
/******************/
ul_HighTimerValue
=
......@@ -2837,9 +2837,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
*
(0.00025 * b_ClockSelection));
/*******************/
/*******************/
/* Round the value */
/*******************/
/*******************/
if ((double)((double)ul_HighTiming * (0.00025 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) {
ul_HighTimerValue
......@@ -2849,9 +2849,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
1;
}
/*****************************/
/*****************************/
/* Calculate the real timing */
/*****************************/
/*****************************/
ul_RealHighTiming
=
......@@ -2901,15 +2901,15 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
break;
/******/
/******/
/* æs */
/******/
/******/
case 1:
/******************/
/******************/
/* Timer 0 factor */
/******************/
/******************/
ul_HighTimerValue
=
......@@ -2918,9 +2918,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
*
(0.25 * b_ClockSelection));
/*******************/
/*******************/
/* Round the value */
/*******************/
/*******************/
if ((double)((double)ul_HighTiming * (0.25 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) {
ul_HighTimerValue
......@@ -2930,9 +2930,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
1;
}
/*****************************/
/*****************************/
/* Calculate the real timing */
/*****************************/
/*****************************/
ul_RealHighTiming
=
......@@ -2984,15 +2984,15 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
break;
/******/
/******/
/* ms */
/******/
/******/
case 2:
/******************/
/******************/
/* Timer 0 factor */
/******************/
/******************/
ul_HighTimerValue
=
......@@ -3002,9 +3002,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
*
b_ClockSelection);
/*******************/
/*******************/
/* Round the value */
/*******************/
/*******************/
if ((double)((double)ul_HighTiming * (250.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) {
ul_HighTimerValue
......@@ -3014,9 +3014,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
1;
}
/*****************************/
/*****************************/
/* Calculate the real timing */
/*****************************/
/*****************************/
ul_RealHighTiming
=
......@@ -3066,15 +3066,15 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
break;
/*****/
/*****/
/* s */
/*****/
/*****/
case 3:
/******************/
/******************/
/* Timer 0 factor */
/******************/
/******************/
ul_HighTimerValue
=
......@@ -3085,9 +3085,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
*
b_ClockSelection));
/*******************/
/*******************/
/* Round the value */
/*******************/
/*******************/
if ((double)((double)ul_HighTiming * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) {
ul_HighTimerValue
......@@ -3097,9 +3097,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
1;
}
/*****************************/
/*****************************/
/* Calculate the real timing */
/*****************************/
/*****************************/
ul_RealHighTiming
=
......@@ -3152,15 +3152,15 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
break;
/******/
/******/
/* mn */
/******/
/******/
case 4:
/******************/
/******************/
/* Timer 0 factor */
/******************/
/******************/
ul_HighTimerValue
=
......@@ -3174,9 +3174,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
*
b_ClockSelection));
/*******************/
/*******************/
/* Round the value */
/*******************/
/*******************/
if ((double)((double)(ul_HighTiming * 60.0) * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) {
ul_HighTimerValue
......@@ -3186,9 +3186,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
1;
}
/*****************************/
/*****************************/
/* Calculate the real timing */
/*****************************/
/*****************************/
ul_RealHighTiming
=
......@@ -3249,9 +3249,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
fpu_end();
/************************/
/************************/
/* Save the timing unit */
/************************/
/************************/
devpriv->
s_ModuleInfo
......@@ -3263,9 +3263,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
=
b_TimingUnit;
/****************************/
/****************************/
/* Save the low base timing */
/****************************/
/****************************/
devpriv->
s_ModuleInfo
......@@ -3287,9 +3287,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
=
ul_RealLowTiming;
/****************************/
/****************************/
/* Save the high base timing */
/****************************/
/****************************/
devpriv->
s_ModuleInfo
......@@ -3311,21 +3311,21 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
=
ul_RealHighTiming;
/************************/
/************************/
/* Write the low timing */
/************************/
/************************/
outl(ul_LowTimerValue, devpriv->s_BoardInfos.ui_Address + 0 + (20 * b_PWM) + (64 * b_ModulNbr));
/*************************/
/*************************/
/* Write the high timing */
/*************************/
/*************************/
outl(ul_HighTimerValue, devpriv->s_BoardInfos.ui_Address + 4 + (20 * b_PWM) + (64 * b_ModulNbr));
/***************************/
/***************************/
/* Set the clock selection */
/***************************/
/***************************/
dw_Command =
inl
......@@ -3347,9 +3347,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
0x80;
}
/***************************/
/***************************/
/* Set the clock selection */
/***************************/
/***************************/
outl(dw_Command,
devpriv->
......@@ -3358,55 +3358,55 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev,
+ 8 +
(20 * b_PWM) + (64 * b_ModulNbr));
} else {
/***************************************/
/***************************************/
/* High base timing selection is wrong */
/***************************************/
/***************************************/
DPRINTK("High base timing selection is wrong\n");
i_ReturnValue =
-8;
}
} else {
/**************************************/
/**************************************/
/* Low base timing selection is wrong */
/**************************************/
/**************************************/
DPRINTK("Low base timing selection is wrong\n");
i_ReturnValue = -7;
}
} // if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4))
} /* if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) */
else {
/**********************************/
/**********************************/
/* Timing unit selection is wrong */
/**********************************/
/**********************************/
DPRINTK("Timing unit selection is wrong\n");
i_ReturnValue = -6;
} // if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4))
} // if (dw_Status & 0x10)
} /* if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) */
} /* if (dw_Status & 0x10) */
else {
/***********************/
/***********************/
/* PWM not initialised */
/***********************/
/***********************/
DPRINTK("PWM not initialised\n");
i_ReturnValue = -5;
} // if (dw_Status & 0x10)
} // if (b_PWM >= 0 && b_PWM <= 1)
} /* if (dw_Status & 0x10) */
} /* if (b_PWM >= 0 && b_PWM <= 1) */
else {
/******************************/
/******************************/
/* Tor PWM selection is wrong */
/******************************/
/******************************/
DPRINTK("Tor PWM selection is wrong\n");
i_ReturnValue = -4;
} // if (b_PWM >= 0 && b_PWM <= 1)
} /* if (b_PWM >= 0 && b_PWM <= 1) */
} else {
/**********************************/
/**********************************/
/* The module is not a PWM module */
/**********************************/
/**********************************/
DPRINTK("The module is not a PWM module\n");
i_ReturnValue = -3;
}
} else {
/***********************/
/***********************/
/* Module number error */
/***********************/
/***********************/
DPRINTK("Module number error\n");
i_ReturnValue = -2;
}
......@@ -3482,30 +3482,30 @@ int i_APCI1710_InsnReadGetPWMStatus(struct comedi_device * dev, struct comedi_su
/**************************/
if (b_ModulNbr < 4) {
/***************/
/***************/
/* Test if PWM */
/***************/
/***************/
if ((devpriv->s_BoardInfos.
dw_MolduleConfiguration[b_ModulNbr] &
0xFFFF0000UL) == APCI1710_PWM) {
/**************************/
/**************************/
/* Test the PWM selection */
/**************************/
/**************************/
if (b_PWM <= 1) {
/***************************/
/***************************/
/* Test if PWM initialised */
/***************************/
/***************************/
dw_Status = inl(devpriv->s_BoardInfos.
ui_Address + 12 + (20 * b_PWM) +
(64 * b_ModulNbr));
if (dw_Status & 0x10) {
/***********************/
/***********************/
/* Test if PWM enabled */
/***********************/
/***********************/
if (dw_Status & 0x1) {
*pb_PWMOutputStatus =
......@@ -3514,45 +3514,45 @@ int i_APCI1710_InsnReadGetPWMStatus(struct comedi_device * dev, struct comedi_su
*pb_ExternGateStatus =
(unsigned char) ((dw_Status >> 6)
& 1);
} // if (dw_Status & 0x1)
} /* if (dw_Status & 0x1) */
else {
/*******************/
/*******************/
/* PWM not enabled */
/*******************/
/*******************/
DPRINTK("PWM not enabled \n");
i_ReturnValue = -6;
} // if (dw_Status & 0x1)
} // if (dw_Status & 0x10)
} /* if (dw_Status & 0x1) */
} /* if (dw_Status & 0x10) */
else {
/***********************/
/***********************/
/* PWM not initialised */
/***********************/
/***********************/
DPRINTK("PWM not initialised\n");
i_ReturnValue = -5;
} // if (dw_Status & 0x10)
} // if (b_PWM >= 0 && b_PWM <= 1)
} /* if (dw_Status & 0x10) */
} /* if (b_PWM >= 0 && b_PWM <= 1) */
else {
/******************************/
/******************************/
/* Tor PWM selection is wrong */
/******************************/
/******************************/
DPRINTK("Tor PWM selection is wrong\n");
i_ReturnValue = -4;
} // if (b_PWM >= 0 && b_PWM <= 1)
} /* if (b_PWM >= 0 && b_PWM <= 1) */
} else {
/**********************************/
/**********************************/
/* The module is not a PWM module */
/**********************************/
/**********************************/
DPRINTK("The module is not a PWM module\n");
i_ReturnValue = -3;
}
} else {
/***********************/
/***********************/
/* Module number error */
/***********************/
/***********************/
DPRINTK("Module number error\n");
i_ReturnValue = -2;
......@@ -3574,9 +3574,9 @@ int i_APCI1710_InsnBitsReadPWMInterrupt(struct comedi_device * dev,
s_FIFOInterruptParameters[devpriv->
s_InterruptParameters.ui_Read].ul_OldCounterLatchValue;
/**************************/
/**************************/
/* Increment the read FIFO */
/***************************/
/***************************/
devpriv->
s_InterruptParameters.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7