USB: storage: optimize to match the Huawei USB storage devices and support new switch command

commit 200e0d99 upstream.

1. Optimize the match rules with new macro for Huawei USB storage devices,
   to avoid to load USB storage driver for the modem interface
   with Huawei devices.
2. Add to support new switch command for new Huawei USB dongles.
Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

drivers/usb/storage/initializers.c

@@ -92,8 +92,8 @@ int usb_stor_ucr61s2b_init(struct us_data *us)
 	return 0;
 }
 
-/* This places the HUAWEI E220 devices in multi-port mode */
-int usb_stor_huawei_e220_init(struct us_data *us)
+/* This places the HUAWEI usb dongles in multi-port mode */
+static int usb_stor_huawei_feature_init(struct us_data *us)
 {
 	int result;
 
@@ -104,3 +104,75 @@ int usb_stor_huawei_e220_init(struct us_data *us)
 	US_DEBUGP("Huawei mode set result is %d\n", result);
 	return 0;
 }
+
+/*
+ * It will send a scsi switch command called rewind' to huawei dongle.
+ * When the dongle receives this command at the first time,
+ * it will reboot immediately. After rebooted, it will ignore this command.
+ * So it is  unnecessary to read its response.
+ */
+static int usb_stor_huawei_scsi_init(struct us_data *us)
+{
+	int result = 0;
+	int act_len = 0;
+	struct bulk_cb_wrap *bcbw = (struct bulk_cb_wrap *) us->iobuf;
+	char rewind_cmd[] = {0x11, 0x06, 0x20, 0x00, 0x00, 0x01, 0x01, 0x00,
+			0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+	bcbw->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcbw->Tag = 0;
+	bcbw->DataTransferLength = 0;
+	bcbw->Flags = bcbw->Lun = 0;
+	bcbw->Length = sizeof(rewind_cmd);
+	memset(bcbw->CDB, 0, sizeof(bcbw->CDB));
+	memcpy(bcbw->CDB, rewind_cmd, sizeof(rewind_cmd));
+
+	result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcbw,
+					US_BULK_CB_WRAP_LEN, &act_len);
+	US_DEBUGP("transfer actual length=%d, result=%d\n", act_len, result);
+	return result;
+}
+
+/*
+ * It tries to find the supported Huawei USB dongles.
+ * In Huawei, they assign the following product IDs
+ * for all of their mobile broadband dongles,
+ * including the new dongles in the future.
+ * So if the product ID is not included in this list,
+ * it means it is not Huawei's mobile broadband dongles.
+ */
+static int usb_stor_huawei_dongles_pid(struct us_data *us)
+{
+	struct usb_interface_descriptor *idesc;
+	int idProduct;
+
+	idesc = &us->pusb_intf->cur_altsetting->desc;
+	idProduct = us->pusb_dev->descriptor.idProduct;
+	/* The first port is CDROM,
+	 * means the dongle in the single port mode,
+	 * and a switch command is required to be sent. */
+	if (idesc && idesc->bInterfaceNumber == 0) {
+		if ((idProduct == 0x1001)
+			|| (idProduct == 0x1003)
+			|| (idProduct == 0x1004)
+			|| (idProduct >= 0x1401 && idProduct <= 0x1500)
+			|| (idProduct >= 0x1505 && idProduct <= 0x1600)
+			|| (idProduct >= 0x1c02 && idProduct <= 0x2202)) {
+			return 1;
+		}
+	}
+	return 0;
+}
+
+int usb_stor_huawei_init(struct us_data *us)
+{
+	int result = 0;
+
+	if (usb_stor_huawei_dongles_pid(us)) {
+		if (us->pusb_dev->descriptor.idProduct >= 0x1446)
+			result = usb_stor_huawei_scsi_init(us);
+		else
+			result = usb_stor_huawei_feature_init(us);
+	}
+	return result;
+}

drivers/usb/storage/initializers.h

@@ -46,5 +46,5 @@ int usb_stor_euscsi_init(struct us_data *us);
  * flash reader */
 int usb_stor_ucr61s2b_init(struct us_data *us);
 
-/* This places the HUAWEI E220 devices in multi-port mode */
-int usb_stor_huawei_e220_init(struct us_data *us);
+/* This places the HUAWEI usb dongles in multi-port mode */
+int usb_stor_huawei_init(struct us_data *us);