dt-bindings: mfd: maxim,max77686: Convert to dtschema

Convert the MFD part of Maxim MAX77686 PMIC to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211125074826.7947-3-krzysztof.kozlowski@canonical.com

Documentation/devicetree/bindings/mfd/max77686.txt

-Maxim MAX77686 multi-function device
-
-MAX77686 is a Multifunction device with PMIC, RTC and Charger on chip. It is
-interfaced to host controller using i2c interface. PMIC and Charger submodules
-are addressed using same i2c slave address whereas RTC submodule uses
-different i2c slave address,presently for which we are statically creating i2c
-client while probing.This document describes the binding for mfd device and
-PMIC submodule.
-
-Bindings for the built-in 32k clock generator block and
-regulators are defined in ../clk/maxim,max77686.txt and
-../regulator/max77686.txt respectively.
-
-Required properties:
-- compatible : Must be "maxim,max77686";
-- reg : Specifies the i2c slave address of PMIC block.
-- interrupts : This i2c device has an IRQ line connected to the main SoC.
-
-Example:
-
-	max77686: pmic@9 {
-		compatible = "maxim,max77686";
-		interrupt-parent = <&wakeup_eint>;
-		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
-		reg = <0x09>;
-	};

Documentation/devicetree/bindings/mfd/maxim,max77686.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77686.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77686 Power Management IC
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77686 Power Management
+  Integrated Circuit (PMIC).
+
+  The Maxim MAX77686 is a Power Management IC which includes voltage and
+  current regulators, RTC and clock outputs.
+
+  The MAX77686 provides three 32.768khz clock outputs that can be controlled
+  (gated/ungated) over I2C.  The clock IDs are defined as preprocessor macros
+  in dt-bindings/clock/maxim,max77686.h.
+
+properties:
+  compatible:
+    const: maxim,max77686
+
+  '#clock-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  voltage-regulators:
+    $ref: ../regulator/maxim,max77686.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        max77686: pmic@9 {
+            compatible = "maxim,max77686";
+            reg = <0x09>;
+
+            interrupt-parent = <&gpx0>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-0 = <&max77686_irq>;
+            pinctrl-names = "default";
+            wakeup-source;
+            #clock-cells = <1>;
+
+            voltage-regulators {
+                LDO1 {
+                    regulator-name = "VALIVE_1.0V_AP";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+                };
+
+                LDO2 {
+                    regulator-name = "VM1M2_1.2V_AP";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <1200000>;
+                    regulator-always-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                // ...
+
+                LDO22 {
+                    regulator-name = "VMEM_VDD_2.8V";
+                    regulator-min-microvolt = <2800000>;
+                    regulator-max-microvolt = <2800000>;
+                    maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+                };
+
+                // ...
+
+                BUCK1 {
+                    regulator-name = "VDD_MIF";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                BUCK2 {
+                    regulator-name = "VDD_ARM";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1500000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                // ...
+
+                BUCK9 {
+                    regulator-name = "CAM_ISP_CORE_1.2V";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1200000>;
+                    maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
+                };
+            };
+        };
+    };

MAINTAINERS

@@ -11594,7 +11594,6 @@ M:	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
 M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
-F:	Documentation/devicetree/bindings/*/max77686.txt
 F:	Documentation/devicetree/bindings/*/maxim,max77686.yaml
 F:	Documentation/devicetree/bindings/clock/maxim,max77686.txt
 F:	Documentation/devicetree/bindings/mfd/max14577.txt