Commit 014f2ffd authored by Giuseppe CAVALLARO's avatar Giuseppe CAVALLARO Committed by David S. Miller

net: phy: icplus: fix broken INTR pin settings

This patch fixes the setting of the INTR pin that is
valid for IP101 A/G device and not for the IP1001.
Reported-by: default avatarAnunay Saxena <anunay.saxena@st.com>
Signed-off-by: default avatarGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent b4a49631
...@@ -139,11 +139,6 @@ static int ip1001_config_init(struct phy_device *phydev) ...@@ -139,11 +139,6 @@ static int ip1001_config_init(struct phy_device *phydev)
if (c < 0) if (c < 0)
return c; return c;
/* INTR pin used: speed/link/duplex will cause an interrupt */
c = phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, IP101A_G_IRQ_DEFAULT);
if (c < 0)
return c;
if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
(phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) ||
(phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) || (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
...@@ -178,6 +173,11 @@ static int ip101a_g_config_init(struct phy_device *phydev) ...@@ -178,6 +173,11 @@ static int ip101a_g_config_init(struct phy_device *phydev)
if (c < 0) if (c < 0)
return c; return c;
/* INTR pin used: speed/link/duplex will cause an interrupt */
c = phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, IP101A_G_IRQ_DEFAULT);
if (c < 0)
return c;
/* Enable Auto Power Saving mode */ /* Enable Auto Power Saving mode */
c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
c |= IP101A_G_APS_ON; c |= IP101A_G_APS_ON;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment