ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator

We enabled USB host 1, so host 1's vbus should be on to let
host 1 work.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

arch/arm/boot/dts/imx6qdl-sabresd.dtsi

@@ -27,6 +27,15 @@ reg_usb_otg_vbus: usb_otg_vbus {
 			enable-active-high;
 		};
 
+		reg_usb_h1_vbus: usb_h1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 29 0>;
+			enable-active-high;
+		};
+
 		reg_audio: wm8962_supply {
 			compatible = "regulator-fixed";
 			regulator-name = "wm8962-supply";
@@ -161,6 +170,7 @@ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000
 				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000
 				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
 				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
 			>;
 		};
 	};
@@ -203,6 +213,7 @@ &uart1 {
 };
 
 &usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
 	status = "okay";
 };