Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs:

  Reset subsystem, merged through arm-soc by tradition:
   - Make bool drivers explicitly non-modular
   - New support for i.MX7 and Arria10 reset controllers

  PATA driver for Palmchip BK371 (acked by Tejun)

  Power domain drivers for i.MX (GPC, GPCv2)
   - Moved out of mach-imx for GPC
   - Bunch of tweaks, fixes, etc

  PMC support for Tegra186

  SoC detection support for Renesas RZ/G1H and RZ/G1N

  Move Tegra flow controller driver from mach directory to drivers/soc
   - (Power management / CPU power driver)

  Misc smaller tweaks for other platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
  soc: pm-domain: Fix the mangled urls
  soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0
  soc: renesas: rcar-sysc: Add support for fixing up power area tables
  soc: renesas: Register SoC device early
  soc: imx: gpc: add workaround for i.MX6QP to the GPC PD driver
  dt-bindings: imx-gpc: add i.MX6 QuadPlus compatible
  soc: imx: gpc: add defines for domain index
  soc: imx: Add GPCv2 power gating driver
  dt-bindings: Add GPCv2 power gating driver
  ARM/clk: move the ICST library to drivers/clk
  ARM: plat-versatile: remove stale clock header
  ARM: keystone: Drop PM domain support for k2g
  soc: ti: Add ti_sci_pm_domains driver
  dt-bindings: Add TI SCI PM Domains
  PM / Domains: Do not check if simple providers have phandle cells
  PM / Domains: Add generic data pointer to genpd data struct
  soc/tegra: Add initial flowctrl support for Tegra132/210
  soc/tegra: flowctrl: Add basic platform driver
  soc/tegra: Move Tegra flowctrl driver
  ARM: tegra: Remove unnecessary inclusion of flowctrl header
  ...

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt

+NVIDIA Tegra Power Management Controller (PMC)
+
+Required properties:
+- compatible: Should contain one of the following:
+  - "nvidia,tegra186-pmc": for Tegra186
+- reg: Must contain an (offset, length) pair of the register set for each
+  entry in reg-names.
+- reg-names: Must include the following entries:
+  - "pmc"
+  - "wake"
+  - "aotag"
+  - "scratch"
+
+Optional properties:
+- nvidia,invert-interrupt: If present, inverts the PMU interrupt signal.
+
+Example:
+
+SoC DTSI:
+
+	pmc@c3600000 {
+		compatible = "nvidia,tegra186-pmc";
+		reg = <0 0x0c360000 0 0x10000>,
+		      <0 0x0c370000 0 0x10000>,
+		      <0 0x0c380000 0 0x10000>,
+		      <0 0x0c390000 0 0x10000>;
+		reg-names = "pmc", "wake", "aotag", "scratch";
+	};
+
+Board DTS:
+
+	pmc@c360000 {
+		nvidia,invert-interrupt;
+	};

Documentation/devicetree/bindings/power/fsl,imx-gpc.txt

 Freescale i.MX General Power Controller
 =======================================
 
-The i.MX6Q General Power Control (GPC) block contains DVFS load tracking
-counters and Power Gating Control (PGC) for the CPU and PU (GPU/VPU) power
-domains.
+The i.MX6 General Power Control (GPC) block contains DVFS load tracking
+counters and Power Gating Control (PGC).
 
 Required properties:
-- compatible: Should be "fsl,imx6q-gpc" or "fsl,imx6sl-gpc"
+- compatible: Should be one of the following:
+  - fsl,imx6q-gpc
+  - fsl,imx6qp-gpc
+  - fsl,imx6sl-gpc
 - reg: should be register base and length as documented in the
   datasheet
-- interrupts: Should contain GPC interrupt request 1
-- pu-supply: Link to the LDO regulator powering the PU power domain
-- clocks: Clock phandles to devices in the PU power domain that need
-	  to be enabled during domain power-up for reset propagation.
-- #power-domain-cells: Should be 1, see below:
+- interrupts: Should contain one interrupt specifier for the GPC interrupt
+- clocks: Must contain an entry for each entry in clock-names.
+  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - ipg
 
-The gpc node is a power-controller as documented by the generic power domain
-bindings in Documentation/devicetree/bindings/power/power_domain.txt.
+The power domains are generic power domain providers as documented in
+Documentation/devicetree/bindings/power/power_domain.txt. They are described as
+subnodes of the power gating controller 'pgc' node of the GPC and should
+contain the following:
+
+Required properties:
+- reg: Must contain the DOMAIN_INDEX of this power domain
+  The following DOMAIN_INDEX values are valid for i.MX6Q:
+  ARM_DOMAIN     0
+  PU_DOMAIN      1
+  The following additional DOMAIN_INDEX value is valid for i.MX6SL:
+  DISPLAY_DOMAIN 2
+
+- #power-domain-cells: Should be 0
+
+Optional properties:
+- clocks: a number of phandles to clocks that need to be enabled during domain
+  power-up sequencing to ensure reset propagation into devices located inside
+  this power domain
+- power-supply: a phandle to the regulator powering this domain
 
 Example:
 
@@ -25,14 +45,30 @@ Example:
 		reg = <0x020dc000 0x4000>;
 		interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 90 IRQ_TYPE_LEVEL_HIGH>;
-		pu-supply = <&reg_pu>;
+		clocks = <&clks IMX6QDL_CLK_IPG>;
+		clock-names = "ipg";
+
+		pgc {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-domain@0 {
+				reg = <0>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_pu: power-domain@1 {
+				reg = <1>;
+				#power-domain-cells = <0>;
+				power-supply = <&reg_pu>;
 				clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
 				         <&clks IMX6QDL_CLK_GPU3D_SHADER>,
 				         <&clks IMX6QDL_CLK_GPU2D_CORE>,
 				         <&clks IMX6QDL_CLK_GPU2D_AXI>,
 				         <&clks IMX6QDL_CLK_OPENVG_AXI>,
 				         <&clks IMX6QDL_CLK_VPU_AXI>;
-		#power-domain-cells = <1>;
+			};
+		};
 	};
 
 
@@ -40,20 +76,13 @@ Specifying power domain for IP modules
 ======================================
 
 IP cores belonging to a power domain should contain a 'power-domains' property
-that is a phandle pointing to the gpc device node and a DOMAIN_INDEX specifying
-the power domain the device belongs to.
+that is a phandle pointing to the power domain the device belongs to.
 
 Example of a device that is part of the PU power domain:
 
 	vpu: vpu@02040000 {
 		reg = <0x02040000 0x3c000>;
 		/* ... */
-		power-domains = <&gpc 1>;
+		power-domains = <&pd_pu>;
 		/* ... */
 	};
-
-The following DOMAIN_INDEX values are valid for i.MX6Q:
-ARM_DOMAIN     0
-PU_DOMAIN      1
-The following additional DOMAIN_INDEX value is valid for i.MX6SL:
-DISPLAY_DOMAIN 2

Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt

+Freescale i.MX General Power Controller v2
+==========================================
+
+The i.MX7S/D General Power Control (GPC) block contains Power Gating
+Control (PGC) for various power domains.
+
+Required properties:
+
+- compatible: Should be "fsl,imx7d-gpc"
+
+- reg: should be register base and length as documented in the
+  datasheet
+
+- interrupts: Should contain GPC interrupt request 1
+
+Power domains contained within GPC node are generic power domain
+providers, documented in
+Documentation/devicetree/bindings/power/power_domain.txt, which are
+described as subnodes of the power gating controller 'pgc' node,
+which, in turn, is expected to contain the following:
+
+Required properties:
+
+- reg: Power domain index. Valid values are defined in
+  include/dt-bindings/power/imx7-power.h
+
+- #power-domain-cells: Should be 0
+
+Optional properties:
+
+- power-supply: Power supply used to power the domain
+
+Example:
+
+	gpc: gpc@303a0000 {
+		compatible = "fsl,imx7d-gpc";
+		reg = <0x303a0000 0x1000>;
+		interrupt-controller;
+		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&intc>;
+
+		pgc {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pgc_pcie_phy: power-domain@3 {
+				#power-domain-cells = <0>;
+
+				reg = <IMX7_POWER_DOMAIN_PCIE_PHY>;
+				power-supply = <&reg_1p0d>;
+			};
+		};
+	};
+
+
+Specifying power domain for IP modules
+======================================
+
+IP cores belonging to a power domain should contain a 'power-domains'
+property that is a phandle for PGC node representing the domain.
+
+Example of a device that is part of the PCIE_PHY power domain:
+
+	pcie: pcie@33800000 {
+	      reg = <0x33800000 0x4000>,
+	            <0x4ff00000 0x80000>;
+		/* ... */
+		power-domains = <&pgc_pcie_phy>;
+		/* ... */
+	};

Documentation/devicetree/bindings/reset/fsl,imx7-src.txt

+Freescale i.MX7 System Reset Controller
+======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "fsl,imx7-src", "syscon"
+- reg: should be register base and length as documented in the
+  datasheet
+- interrupts: Should contain SRC interrupt
+- #reset-cells: 1, see below
+
+example:
+
+src: reset-controller@30390000 {
+     compatible = "fsl,imx7d-src", "syscon";
+     reg = <0x30390000 0x2000>;
+     interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+     #reset-cells = <1>;
+};
+
+
+Specifying reset lines connected to IP modules
+==============================================
+
+The system reset controller can be used to reset various set of
+peripherals. Device nodes that need access to reset lines should
+specify them as a reset phandle in their corresponding node as
+specified in reset.txt.
+
+Example:
+
+	pcie: pcie@33800000 {
+
+		...
+
+		resets = <&src IMX7_RESET_PCIEPHY>,
+			 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>;
+		reset-names = "pciephy", "apps";
+
+		...
+        };
+
+
+For list of all valid reset indicies see
+<dt-bindings/reset/imx7-reset.h>

Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt

+Texas Instruments TI-SCI Generic Power Domain
+---------------------------------------------
+
+Some TI SoCs contain a system controller (like the PMMC, etc...) that is
+responsible for controlling the state of the IPs that are present.
+Communication between the host processor running an OS and the system
+controller happens through a protocol known as TI-SCI [1].
+
+[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+
+PM Domain Node
+==============
+The PM domain node represents the global PM domain managed by the PMMC, which
+in this case is the implementation as documented by the generic PM domain
+bindings in Documentation/devicetree/bindings/power/power_domain.txt.  Because
+this relies on the TI SCI protocol to communicate with the PMMC it must be a
+child of the pmmc node.
+
+Required Properties:
+--------------------
+- compatible: should be "ti,sci-pm-domain"
+- #power-domain-cells: Must be 1 so that an id can be provided in each
+		       device node.
+
+Example (K2G):
+-------------
+	pmmc: pmmc {
+		compatible = "ti,k2g-sci";
+		...
+
+		k2g_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <1>;
+		};
+	};
+
+PM Domain Consumers
+===================
+Hardware blocks belonging to a PM domain should contain a "power-domains"
+property that is a phandle pointing to the corresponding PM domain node
+along with an index representing the device id to be passed to the PMMC
+for device control.
+
+Required Properties:
+--------------------
+- power-domains: phandle pointing to the corresponding PM domain node
+		 and an ID representing the device.
+
+See dt-bindings/genpd/k2g.h for the list of valid identifiers for k2g.
+
+Example (K2G):
+--------------------
+	uart0: serial@02530c00 {
+		compatible = "ns16550a";
+		...
+		power-domains = <&k2g_pds K2G_DEV_UART0>;
+	};

MAINTAINERS

@@ -653,7 +653,9 @@ M:	Thor Thayer <thor.thayer@linux.intel.com>
 S:	Maintained
 F:	drivers/gpio/gpio-altera-a10sr.c
 F:	drivers/mfd/altera-a10sr.c
+F:	drivers/reset/reset-a10sr.c
 F:	include/linux/mfd/altera-a10sr.h
+F:	include/dt-bindings/reset/altr,rst-mgr-a10sr.h
 
 ALTERA TRIPLE SPEED ETHERNET DRIVER
 M:	Vince Bridgers <vbridger@opensource.altera.com>
@@ -1282,6 +1284,7 @@ F:	arch/arm/mach-mxs/
 F:	arch/arm/boot/dts/imx*
 F:	arch/arm/configs/imx*_defconfig
 F:	drivers/clk/imx/
+F:	drivers/soc/imx/
 F:	include/soc/imx/
 
 ARM/FREESCALE VYBRID ARM ARCHITECTURE
@@ -12604,6 +12607,9 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
 F:	drivers/firmware/ti_sci*
 F:	include/linux/soc/ti/ti_sci_protocol.h
+F:	Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+F:	include/dt-bindings/genpd/k2g.h
+F:	drivers/soc/ti/ti_sci_pm_domains.c
 
 THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>

arch/arm/common/Kconfig

-config ICST
-	bool
-
 config SA1111
 	bool
 	select DMABOUNCE if !ARCH_PXA

arch/arm/common/Makefile

@@ -4,7 +4,6 @@
 
 obj-y				+= firmware.o
 
-obj-$(CONFIG_ICST)		+= icst.o
 obj-$(CONFIG_SA1111)		+= sa1111.o
 obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o

arch/arm/mach-imx/gpc.c

@@ -10,26 +10,17 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include <linux/clk.h>
-#include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/irqchip.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <linux/platform_device.h>
-#include <linux/pm_domain.h>
-#include <linux/regulator/consumer.h>
 #include <linux/irqchip/arm-gic.h>
 #include "common.h"
 #include "hardware.h"
 
-#define GPC_CNTR		0x000
 #define GPC_IMR1		0x008
-#define GPC_PGC_GPU_PDN		0x260
-#define GPC_PGC_GPU_PUPSCR	0x264
-#define GPC_PGC_GPU_PDNSCR	0x268
 #define GPC_PGC_CPU_PDN		0x2a0
 #define GPC_PGC_CPU_PUPSCR	0x2a4
 #define GPC_PGC_CPU_PDNSCR	0x2a8
@@ -39,18 +30,6 @@
 #define IMR_NUM			4
 #define GPC_MAX_IRQS		(IMR_NUM * 32)
 
-#define GPU_VPU_PUP_REQ		BIT(1)
-#define GPU_VPU_PDN_REQ		BIT(0)
-
-#define GPC_CLK_MAX		6
-
-struct pu_domain {
-	struct generic_pm_domain base;
-	struct regulator *reg;
-	struct clk *clk[GPC_CLK_MAX];
-	int num_clks;
-};
-
 static void __iomem *gpc_base;
 static u32 gpc_wake_irqs[IMR_NUM];
 static u32 gpc_saved_imrs[IMR_NUM];
@@ -296,199 +275,3 @@ void __init imx_gpc_check_dt(void)
 		gpc_base = of_iomap(np, 0);
 	}
 }
-
-static void _imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
-{
-	int iso, iso2sw;
-	u32 val;
-
-	/* Read ISO and ISO2SW power down delays */
-	val = readl_relaxed(gpc_base + GPC_PGC_GPU_PDNSCR);
-	iso = val & 0x3f;
-	iso2sw = (val >> 8) & 0x3f;
-
-	/* Gate off PU domain when GPU/VPU when powered down */
-	writel_relaxed(0x1, gpc_base + GPC_PGC_GPU_PDN);
-
-	/* Request GPC to power down GPU/VPU */
-	val = readl_relaxed(gpc_base + GPC_CNTR);
-	val |= GPU_VPU_PDN_REQ;
-	writel_relaxed(val, gpc_base + GPC_CNTR);
-
-	/* Wait ISO + ISO2SW IPG clock cycles */
-	ndelay((iso + iso2sw) * 1000 / 66);
-}
-
-static int imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
-{
-	struct pu_domain *pu = container_of(genpd, struct pu_domain, base);
-
-	_imx6q_pm_pu_power_off(genpd);
-
-	if (pu->reg)
-		regulator_disable(pu->reg);
-
-	return 0;
-}
-
-static int imx6q_pm_pu_power_on(struct generic_pm_domain *genpd)
-{
-	struct pu_domain *pu = container_of(genpd, struct pu_domain, base);
-	int i, ret, sw, sw2iso;
-	u32 val;
-
-	if (pu->reg)
-		ret = regulator_enable(pu->reg);
-	if (pu->reg && ret) {
-		pr_err("%s: failed to enable regulator: %d\n", __func__, ret);
-		return ret;
-	}
-
-	/* Enable reset clocks for all devices in the PU domain */
-	for (i = 0; i < pu->num_clks; i++)
-		clk_prepare_enable(pu->clk[i]);
-
-	/* Gate off PU domain when GPU/VPU when powered down */
-	writel_relaxed(0x1, gpc_base + GPC_PGC_GPU_PDN);
-
-	/* Read ISO and ISO2SW power down delays */
-	val = readl_relaxed(gpc_base + GPC_PGC_GPU_PUPSCR);
-	sw = val & 0x3f;
-	sw2iso = (val >> 8) & 0x3f;
-
-	/* Request GPC to power up GPU/VPU */
-	val = readl_relaxed(gpc_base + GPC_CNTR);
-	val |= GPU_VPU_PUP_REQ;
-	writel_relaxed(val, gpc_base + GPC_CNTR);
-
-	/* Wait ISO + ISO2SW IPG clock cycles */
-	ndelay((sw + sw2iso) * 1000 / 66);
-
-	/* Disable reset clocks for all devices in the PU domain */
-	for (i = 0; i < pu->num_clks; i++)
-		clk_disable_unprepare(pu->clk[i]);
-
-	return 0;
-}
-
-static struct generic_pm_domain imx6q_arm_domain = {
-	.name = "ARM",
-};
-
-static struct pu_domain imx6q_pu_domain = {
-	.base = {
-		.name = "PU",
-		.power_off = imx6q_pm_pu_power_off,
-		.power_on = imx6q_pm_pu_power_on,
-	},
-};
-
-static struct generic_pm_domain imx6sl_display_domain = {
-	.name = "DISPLAY",
-};
-
-static struct generic_pm_domain *imx_gpc_domains[] = {
-	&imx6q_arm_domain,
-	&imx6q_pu_domain.base,
-	&imx6sl_display_domain,
-};
-
-static struct genpd_onecell_data imx_gpc_onecell_data = {
-	.domains = imx_gpc_domains,
-	.num_domains = ARRAY_SIZE(imx_gpc_domains),
-};
-
-static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
-{
-	struct clk *clk;
-	int i, ret;
-
-	imx6q_pu_domain.reg = pu_reg;
-
-	for (i = 0; ; i++) {
-		clk = of_clk_get(dev->of_node, i);
-		if (IS_ERR(clk))
-			break;
-		if (i >= GPC_CLK_MAX) {
-			dev_err(dev, "more than %d clocks\n", GPC_CLK_MAX);
-			goto clk_err;
-		}
-		imx6q_pu_domain.clk[i] = clk;
-	}
-	imx6q_pu_domain.num_clks = i;
-
-	/* Enable power always in case bootloader disabled it. */
-	imx6q_pm_pu_power_on(&imx6q_pu_domain.base);
-
-	if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS))
-		return 0;
-
-	imx6q_pu_domain.base.states = devm_kzalloc(dev,
-					sizeof(*imx6q_pu_domain.base.states),
-					GFP_KERNEL);
-	if (!imx6q_pu_domain.base.states)
-		return -ENOMEM;
-
-	imx6q_pu_domain.base.states[0].power_off_latency_ns = 25000;
-	imx6q_pu_domain.base.states[0].power_on_latency_ns = 2000000;
-	imx6q_pu_domain.base.state_count = 1;
-
-	for (i = 0; i < ARRAY_SIZE(imx_gpc_domains); i++)
-		pm_genpd_init(imx_gpc_domains[i], NULL, false);
-
-	ret =  of_genpd_add_provider_onecell(dev->of_node,
-					     &imx_gpc_onecell_data);
-	if (ret)
-		goto power_off;
-
-	return 0;
-
-power_off:
-	imx6q_pm_pu_power_off(&imx6q_pu_domain.base);
-clk_err:
-	while (i--)
-		clk_put(imx6q_pu_domain.clk[i]);
-	imx6q_pu_domain.reg = NULL;
-	return -EINVAL;
-}
-
-static int imx_gpc_probe(struct platform_device *pdev)
-{
-	struct regulator *pu_reg;
-	int ret;
-
-	/* bail out if DT too old and doesn't provide the necessary info */
-	if (!of_property_read_bool(pdev->dev.of_node, "#power-domain-cells"))
-		return 0;
-
-	pu_reg = devm_regulator_get_optional(&pdev->dev, "pu");
-	if (PTR_ERR(pu_reg) == -ENODEV)
-		pu_reg = NULL;
-	if (IS_ERR(pu_reg)) {
-		ret = PTR_ERR(pu_reg);
-		dev_err(&pdev->dev, "failed to get pu regulator: %d\n", ret);
-		return ret;
-	}
-
-	return imx_gpc_genpd_init(&pdev->dev, pu_reg);
-}
-
-static const struct of_device_id imx_gpc_dt_ids[] = {
-	{ .compatible = "fsl,imx6q-gpc" },
-	{ .compatible = "fsl,imx6sl-gpc" },
-	{ }
-};
-
-static struct platform_driver imx_gpc_driver = {
-	.driver = {
-		.name = "imx-gpc",
-		.of_match_table = imx_gpc_dt_ids,
-	},
-	.probe = imx_gpc_probe,
-};
-
-static int __init imx_pgc_init(void)
-{
-	return platform_driver_register(&imx_gpc_driver);
-}
-subsys_initcall(imx_pgc_init);

arch/arm/mach-keystone/Kconfig

@@ -10,6 +10,7 @@ config ARCH_KEYSTONE
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ZONE_DMA if ARM_LPAE
 	select PINCTRL
+	select PM_GENERIC_DOMAINS if PM
 	help
 	  Support for boards based on the Texas Instruments Keystone family of
 	  SoCs.

arch/arm/mach-keystone/pm_domain.c

@@ -32,7 +32,9 @@ static struct pm_clk_notifier_block platform_domain_notifier = {
 };
 
 static const struct of_device_id of_keystone_table[] = {
-	{.compatible = "ti,keystone"},
+	{.compatible = "ti,k2hk"},
+	{.compatible = "ti,k2e"},
+	{.compatible = "ti,k2l"},
 	{ /* end of list */ },
 };
 

arch/arm/mach-tegra/Makefile

@@ -2,7 +2,6 @@ asflags-y				+= -march=armv7-a
 
 obj-y                                   += io.o
 obj-y                                   += irq.o
-obj-y					+= flowctrl.o
 obj-y					+= pm.o
 obj-y					+= reset.o
 obj-y					+= reset-handler.o

arch/arm/mach-tegra/cpuidle-tegra20.c

@@ -26,12 +26,13 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 
+#include <soc/tegra/flowctrl.h>
+
 #include <asm/cpuidle.h>
 #include <asm/smp_plat.h>
 #include <asm/suspend.h>
 
 #include "cpuidle.h"
-#include "flowctrl.h"
 #include "iomap.h"
 #include "irq.h"
 #include "pm.h"

arch/arm/mach-tegra/platsmp.c

@@ -21,6 +21,7 @@
 #include <linux/jiffies.h>
 #include <linux/smp.h>
 
+#include <soc/tegra/flowctrl.h>
 #include <soc/tegra/fuse.h>
 #include <soc/tegra/pmc.h>
 
@@ -30,7 +31,6 @@
 #include <asm/smp_scu.h>
 
 #include "common.h"
-#include "flowctrl.h"
 #include "iomap.h"
 #include "reset.h"
 

arch/arm/mach-tegra/pm.c

@@ -27,6 +27,7 @@
 #include <linux/spinlock.h>
 #include <linux/suspend.h>
 
+#include <soc/tegra/flowctrl.h>
 #include <soc/tegra/fuse.h>
 #include <soc/tegra/pm.h>
 #include <soc/tegra/pmc.h>
@@ -38,7 +39,6 @@
 #include <asm/suspend.h>
 #include <asm/tlbflush.h>
 
-#include "flowctrl.h"
 #include "iomap.h"
 #include "pm.h"
 #include "reset.h"

arch/arm/mach-tegra/reset-handler.S

@@ -17,12 +17,12 @@
 #include <linux/init.h>
 #include <linux/linkage.h>
 
+#include <soc/tegra/flowctrl.h>
 #include <soc/tegra/fuse.h>
 
 #include <asm/asm-offsets.h>
 #include <asm/cache.h>
 
-#include "flowctrl.h"
 #include "iomap.h"
 #include "reset.h"
 #include "sleep.h"

arch/arm/mach-tegra/sleep-tegra20.S

@@ -20,6 +20,8 @@
 
 #include <linux/linkage.h>
 
+#include <soc/tegra/flowctrl.h>
+
 #include <asm/assembler.h>
 #include <asm/proc-fns.h>
 #include <asm/cp15.h>
@@ -27,7 +29,6 @@
 
 #include "irammap.h"
 #include "sleep.h"
-#include "flowctrl.h"
 
 #define EMC_CFG				0xc
 #define EMC_ADR_CFG			0x10

arch/arm/mach-tegra/sleep-tegra30.S

@@ -16,13 +16,13 @@
 
 #include <linux/linkage.h>
 
+#include <soc/tegra/flowctrl.h>
 #include <soc/tegra/fuse.h>
 
 #include <asm/asm-offsets.h>
 #include <asm/assembler.h>
 #include <asm/cache.h>
 
-#include "flowctrl.h"
 #include "irammap.h"
 #include "sleep.h"
 

arch/arm/mach-tegra/sleep.S

@@ -30,8 +30,6 @@
 #include <asm/hardware/cache-l2x0.h>
 
 #include "iomap.h"
-
-#include "flowctrl.h"
 #include "sleep.h"
 
 #define CLK_RESET_CCLK_BURST	0x20

arch/arm/mach-tegra/tegra.c

@@ -48,7 +48,6 @@
 #include "board.h"
 #include "common.h"
 #include "cpuidle.h"
-#include "flowctrl.h"
 #include "iomap.h"
 #include "irq.h"
 #include "pm.h"
@@ -75,7 +74,6 @@ static void __init tegra_init_early(void)
 {
 	of_register_trusted_foundations();
 	tegra_cpu_reset_handler_init();
-	tegra_flowctrl_init();
 }
 
 static void __init tegra_dt_init_irq(void)

arch/arm/plat-versatile/include/plat/clock.h

-#ifndef PLAT_CLOCK_H
-#define PLAT_CLOCK_H
-
-#include <asm/hardware/icst.h>
-
-struct clk_ops {
-	long	(*round)(struct clk *, unsigned long);
-	int	(*set)(struct clk *, unsigned long);
-	void	(*setvco)(struct clk *, struct icst_vco);
-};
-
-int icst_clk_set(struct clk *, unsigned long);
-long icst_clk_round(struct clk *, unsigned long);
-
-#endif

drivers/ata/Kconfig

@@ -518,6 +518,15 @@ config PATA_BF54X
 
 	  If unsure, say N.
 
+config PATA_BK3710
+	tristate "Palmchip BK3710 PATA support"
+	depends on ARCH_DAVINCI
+	help
+	  This option enables support for the integrated IDE controller on
+	  the TI DaVinci SoC.
+
+	  If unsure, say N.
+
 config PATA_CMD64X
 	tristate "CMD64x PATA support"
 	depends on PCI

drivers/ata/Makefile

@@ -51,6 +51,7 @@ obj-$(CONFIG_PATA_ARTOP)	+= pata_artop.o
 obj-$(CONFIG_PATA_ATIIXP)	+= pata_atiixp.o
 obj-$(CONFIG_PATA_ATP867X)	+= pata_atp867x.o
 obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
+obj-$(CONFIG_PATA_BK3710)	+= pata_bk3710.o
 obj-$(CONFIG_PATA_CMD64X)	+= pata_cmd64x.o
 obj-$(CONFIG_PATA_CS5520)	+= pata_cs5520.o
 obj-$(CONFIG_PATA_CS5530)	+= pata_cs5530.o

drivers/base/power/domain.c

@@ -1636,8 +1636,6 @@ static struct generic_pm_domain *genpd_xlate_simple(
 					struct of_phandle_args *genpdspec,
 					void *data)
 {
-	if (genpdspec->args_count != 0)
-		return ERR_PTR(-EINVAL);
 	return data;
 }
 

drivers/base/soc.c

@@ -109,15 +109,18 @@ static void soc_release(struct device *dev)
 	kfree(soc_dev);
 }
 
+static struct soc_device_attribute *early_soc_dev_attr;
+
 struct soc_device *soc_device_register(struct soc_device_attribute *soc_dev_attr)
 {
 	struct soc_device *soc_dev;
 	int ret;
 
 	if (!soc_bus_type.p) {
-		ret = bus_register(&soc_bus_type);
-		if (ret)
-			goto out1;
+		if (early_soc_dev_attr)
+			return ERR_PTR(-EBUSY);
+		early_soc_dev_attr = soc_dev_attr;
+		return NULL;
 	}
 
 	soc_dev = kzalloc(sizeof(*soc_dev), GFP_KERNEL);
@@ -159,45 +162,53 @@ void soc_device_unregister(struct soc_device *soc_dev)
 	ida_simple_remove(&soc_ida, soc_dev->soc_dev_num);
 
 	device_unregister(&soc_dev->dev);
+	early_soc_dev_attr = NULL;
 }
 
 static int __init soc_bus_register(void)
 {
-	if (soc_bus_type.p)
-		return 0;
+	int ret;
+
+	ret = bus_register(&soc_bus_type);
+	if (ret)
+		return ret;
+
+	if (early_soc_dev_attr)
+		return PTR_ERR(soc_device_register(early_soc_dev_attr));
 
-	return bus_register(&soc_bus_type);
+	return 0;
 }
 core_initcall(soc_bus_register);
 
-static int soc_device_match_one(struct device *dev, void *arg)
+static int soc_device_match_attr(const struct soc_device_attribute *attr,
+				 const struct soc_device_attribute *match)
 {
-	struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
-	const struct soc_device_attribute *match = arg;
-
 	if (match->machine &&
-	    (!soc_dev->attr->machine ||
-	     !glob_match(match->machine, soc_dev->attr->machine)))
+	    (!attr->machine || !glob_match(match->machine, attr->machine)))
 		return 0;
 
 	if (match->family &&
-	    (!soc_dev->attr->family ||
-	     !glob_match(match->family, soc_dev->attr->family)))
+	    (!attr->family || !glob_match(match->family, attr->family)))
 		return 0;
 
 	if (match->revision &&
-	    (!soc_dev->attr->revision ||
-	     !glob_match(match->revision, soc_dev->attr->revision)))
+	    (!attr->revision || !glob_match(match->revision, attr->revision)))
 		return 0;
 
 	if (match->soc_id &&
-	    (!soc_dev->attr->soc_id ||
-	     !glob_match(match->soc_id, soc_dev->attr->soc_id)))
+	    (!attr->soc_id || !glob_match(match->soc_id, attr->soc_id)))
 		return 0;
 
 	return 1;
 }
 
+static int soc_device_match_one(struct device *dev, void *arg)
+{
+	struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
+
+	return soc_device_match_attr(soc_dev->attr, arg);
+}
+
 /*
  * soc_device_match - identify the SoC in the machine
  * @matches: zero-terminated array of possible matches
@@ -230,6 +241,11 @@ const struct soc_device_attribute *soc_device_match(
 			break;
 		ret = bus_for_each_dev(&soc_bus_type, NULL, (void *)matches,
 				       soc_device_match_one);
+		if (ret < 0 && early_soc_dev_attr)
+			ret = soc_device_match_attr(early_soc_dev_attr,
+						    matches);
+		if (ret < 0)
+			return NULL;
 		if (!ret)
 			matches++;
 		else

drivers/clk/versatile/Kconfig

+config ICST
+	bool
+
 config COMMON_CLK_VERSATILE
 	bool "Clock driver for ARM Reference designs"
 	depends on ARCH_INTEGRATOR || ARCH_REALVIEW || \

drivers/clk/versatile/Makefile

 # Makefile for Versatile-specific clocks
-obj-$(CONFIG_ICST)		+= clk-icst.o clk-versatile.o
+obj-$(CONFIG_ICST)		+= icst.o clk-icst.o clk-versatile.o
 obj-$(CONFIG_INTEGRATOR_IMPD1)	+= clk-impd1.o
 obj-$(CONFIG_ARCH_REALVIEW)	+= clk-realview.o
 obj-$(CONFIG_CLK_SP810)		+= clk-sp810.o

drivers/clk/versatile/clk-icst.c

@@ -22,6 +22,7 @@
 #include <linux/regmap.h>
 #include <linux/mfd/syscon.h>
 
+#include "icst.h"
 #include "clk-icst.h"
 
 /* Magic unlocking token used on all Versatile boards */

drivers/clk/versatile/clk-icst.h

-#include <asm/hardware/icst.h>
-
 /**
  * struct clk_icst_desc - descriptor for the ICST VCO
  * @params: ICST parameters

drivers/clk/versatile/clk-impd1.c

@@ -12,6 +12,7 @@
 #include <linux/io.h>
 #include <linux/platform_data/clk-integrator.h>
 
+#include "icst.h"
 #include "clk-icst.h"
 
 #define IMPD1_OSC1	0x00

drivers/clk/versatile/clk-realview.c

@@ -11,6 +11,7 @@
 #include <linux/io.h>
 #include <linux/clk-provider.h>
 
+#include "icst.h"
 #include "clk-icst.h"
 
 #define REALVIEW_SYS_OSC0_OFFSET             0x0C

drivers/clk/versatile/clk-versatile.c

@@ -12,6 +12,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 
+#include "icst.h"
 #include "clk-icst.h"
 
 #define INTEGRATOR_HDR_LOCK_OFFSET	0x14

arch/arm/common/icst.c → drivers/clk/versatile/icst.c

@@ -17,7 +17,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <asm/div64.h>
-#include <asm/hardware/icst.h>
+#include "icst.h"
 
 /*
  * Divisors for each OD setting.

arch/arm/include/asm/hardware/icst.h → drivers/clk/versatile/icst.h

 /*
- *  arch/arm/include/asm/hardware/icst.h
- *
  *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -11,8 +9,8 @@
  *  clock generators.  See http://www.idt.com/ for more information
  *  on these devices.
  */
-#ifndef ASMARM_HARDWARE_ICST_H
-#define ASMARM_HARDWARE_ICST_H
+#ifndef ICST_H
+#define ICST_H
 
 struct icst_params {
 	unsigned long	ref;

drivers/firmware/arm_scpi.c

@@ -538,7 +538,7 @@ static int scpi_send_message(u8 idx, void *tx_buf, unsigned int tx_len,
 	msg->tx_len = tx_len;
 	msg->rx_buf = rx_buf;
 	msg->rx_len = rx_len;
-	init_completion(&msg->done);
+	reinit_completion(&msg->done);
 
 	ret = mbox_send_message(scpi_chan->chan, msg);
 	if (ret < 0 || !rx_buf)
@@ -872,8 +872,11 @@ static int scpi_alloc_xfer_list(struct device *dev, struct scpi_chan *ch)
 		return -ENOMEM;
 
 	ch->xfers = xfers;
-	for (i = 0; i < MAX_SCPI_XFERS; i++, xfers++)
+	for (i = 0; i < MAX_SCPI_XFERS; i++, xfers++) {
+		init_completion(&xfers->done);
 		list_add_tail(&xfers->node, &ch->xfers_list);
+	}
+
 	return 0;
 }
 

drivers/firmware/meson/meson_sm.c

@@ -127,6 +127,7 @@ EXPORT_SYMBOL(meson_sm_call);
  * meson_sm_call_read - retrieve data from secure-monitor
  *
  * @buffer:	Buffer to store the retrieved data
+ * @bsize:	Size of the buffer
  * @cmd_index:	Index of the SMC32 function ID
  * @arg0:	SMC32 Argument 0
  * @arg1:	SMC32 Argument 1
@@ -135,11 +136,14 @@ EXPORT_SYMBOL(meson_sm_call);
  * @arg4:	SMC32 Argument 4
  *
  * Return:	size of read data on success, a negative value on error
+ *		When 0 is returned there is no guarantee about the amount of
+ *		data read and bsize bytes are copied in buffer.
  */
-int meson_sm_call_read(void *buffer, unsigned int cmd_index, u32 arg0,
-		       u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+int meson_sm_call_read(void *buffer, unsigned int bsize, unsigned int cmd_index,
+		       u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4)
 {
 	u32 size;
+	int ret;
 
 	if (!fw.chip)
 		return -ENOENT;
@@ -147,16 +151,24 @@ int meson_sm_call_read(void *buffer, unsigned int cmd_index, u32 arg0,
 	if (!fw.chip->cmd_shmem_out_base)
 		return -EINVAL;
 
+	if (bsize > fw.chip->shmem_size)
+		return -EINVAL;
+
 	if (meson_sm_call(cmd_index, &size, arg0, arg1, arg2, arg3, arg4) < 0)
 		return -EINVAL;
 
-	if (!size || size > fw.chip->shmem_size)
+	if (size > bsize)
 		return -EINVAL;
 
+	ret = size;
+
+	if (!size)
+		size = bsize;
+
 	if (buffer)
 		memcpy(buffer, fw.sm_shmem_out_base, size);
 
-	return size;
+	return ret;
 }
 EXPORT_SYMBOL(meson_sm_call_read);
 

drivers/firmware/qcom_scm-32.c

@@ -578,3 +578,21 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
 
 	return ret ? : le32_to_cpu(scm_ret);
 }
+
+int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
+			       u32 spare)
+{
+	return -ENODEV;
+}
+
+int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
+				      size_t *size)
+{
+	return -ENODEV;
+}
+
+int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
+				      u32 spare)
+{
+	return -ENODEV;
+}

drivers/firmware/qcom_scm-64.c

@@ -381,3 +381,61 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
 
 	return ret ? : res.a1;
 }
+
+int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id, u32 spare)
+{
+	struct qcom_scm_desc desc = {0};
+	struct arm_smccc_res res;
+	int ret;
+
+	desc.args[0] = device_id;
+	desc.args[1] = spare;
+	desc.arginfo = QCOM_SCM_ARGS(2);
+
+	ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP, QCOM_SCM_RESTORE_SEC_CFG,
+			    &desc, &res);
+
+	return ret ? : res.a1;
+}
+
+int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
+				      size_t *size)
+{
+	struct qcom_scm_desc desc = {0};
+	struct arm_smccc_res res;
+	int ret;
+
+	desc.args[0] = spare;
+	desc.arginfo = QCOM_SCM_ARGS(1);
+
+	ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
+			    QCOM_SCM_IOMMU_SECURE_PTBL_SIZE, &desc, &res);
+
+	if (size)
+		*size = res.a1;
+
+	return ret ? : res.a2;
+}
+
+int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
+				      u32 spare)
+{
+	struct qcom_scm_desc desc = {0};
+	struct arm_smccc_res res;
+	int ret;
+
+	desc.args[0] = addr;
+	desc.args[1] = size;
+	desc.args[2] = spare;
+	desc.arginfo = QCOM_SCM_ARGS(3, QCOM_SCM_RW, QCOM_SCM_VAL,
+				     QCOM_SCM_VAL);
+
+	ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
+			    QCOM_SCM_IOMMU_SECURE_PTBL_INIT, &desc, &res);
+
+	/* the pg table has been initialized already, ignore the error */
+	if (ret == -EPERM)
+		ret = 0;
+
+	return ret;
+}

drivers/firmware/qcom_scm.c

@@ -315,6 +315,24 @@ static const struct reset_control_ops qcom_scm_pas_reset_ops = {
 	.deassert = qcom_scm_pas_reset_deassert,
 };
 
+int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare)
+{
+	return __qcom_scm_restore_sec_cfg(__scm->dev, device_id, spare);
+}
+EXPORT_SYMBOL(qcom_scm_restore_sec_cfg);
+
+int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size)
+{
+	return __qcom_scm_iommu_secure_ptbl_size(__scm->dev, spare, size);
+}
+EXPORT_SYMBOL(qcom_scm_iommu_secure_ptbl_size);
+
+int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare)
+{
+	return __qcom_scm_iommu_secure_ptbl_init(__scm->dev, addr, size, spare);
+}
+EXPORT_SYMBOL(qcom_scm_iommu_secure_ptbl_init);
+
 /**
  * qcom_scm_is_available() - Checks if SCM is available
  */

drivers/firmware/qcom_scm.h

@@ -85,4 +85,15 @@ static inline int qcom_scm_remap_error(int err)
 	return -EINVAL;
 }
 
+#define QCOM_SCM_SVC_MP			0xc
+#define QCOM_SCM_RESTORE_SEC_CFG	2
+extern int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
+				      u32 spare);
+#define QCOM_SCM_IOMMU_SECURE_PTBL_SIZE	3
+#define QCOM_SCM_IOMMU_SECURE_PTBL_INIT	4
+extern int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
+					     size_t *size);
+extern int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr,
+					     u32 size, u32 spare);
+
 #endif

drivers/nvmem/meson-efuse.c

@@ -27,7 +27,7 @@ static int meson_efuse_read(void *context, unsigned int offset,
 	u8 *buf = val;
 	int ret;
 
-	ret = meson_sm_call_read(buf, SM_EFUSE_READ, offset,
+	ret = meson_sm_call_read(buf, bytes, SM_EFUSE_READ, offset,
 				 bytes, 0, 0, 0);
 	if (ret < 0)
 		return ret;

drivers/reset/Kconfig

@@ -14,6 +14,13 @@ menuconfig RESET_CONTROLLER
 
 if RESET_CONTROLLER
 
+config RESET_A10SR
+	tristate "Altera Arria10 System Resource Reset"
+	depends on MFD_ALTERA_A10SR
+	help
+	  This option enables support for the external reset functions for
+	  peripheral PHYs on the Altera Arria10 System Resource Chip.
+
 config RESET_ATH79
 	bool "AR71xx Reset Driver" if COMPILE_TEST
 	default ATH79
@@ -27,6 +34,13 @@ config RESET_BERLIN
 	help
 	  This enables the reset controller driver for Marvell Berlin SoCs.
 
+config RESET_IMX7
+	bool "i.MX7 Reset Driver" if COMPILE_TEST
+	default SOC_IMX7D
+	select MFD_SYSCON
+	help
+	  This enables the reset controller driver for i.MX7 SoCs.
+
 config RESET_LPC18XX
 	bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST
 	default ARCH_LPC18XX

drivers/reset/Makefile

@@ -2,8 +2,10 @@ obj-y += core.o
 obj-y += hisilicon/
 obj-$(CONFIG_ARCH_STI) += sti/
 obj-$(CONFIG_ARCH_TEGRA) += tegra/
+obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o
 obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
 obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
+obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
 obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
 obj-$(CONFIG_RESET_MESON) += reset-meson.o
 obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
@@ -15,3 +17,4 @@ obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
 obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
 obj-$(CONFIG_RESET_ZX2967) += reset-zx2967.o
 obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
+

drivers/reset/reset-a10sr.c

+/*
+ *  Copyright Intel Corporation (C) 2017. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Reset driver for Altera Arria10 MAX5 System Resource Chip
+ *
+ * Adapted from reset-socfpga.c
+ */
+
+#include <linux/err.h>
+#include <linux/mfd/altera-a10sr.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+
+#include <dt-bindings/reset/altr,rst-mgr-a10sr.h>
+
+struct a10sr_reset {
+	struct reset_controller_dev     rcdev;
+	struct regmap *regmap;
+};
+
+static inline struct a10sr_reset *to_a10sr_rst(struct reset_controller_dev *rc)
+{
+	return container_of(rc, struct a10sr_reset, rcdev);
+}
+
+static inline int a10sr_reset_shift(unsigned long id)
+{
+	switch (id) {
+	case A10SR_RESET_ENET_HPS:
+		return 1;
+	case A10SR_RESET_PCIE:
+	case A10SR_RESET_FILE:
+	case A10SR_RESET_BQSPI:
+	case A10SR_RESET_USB:
+		return id + 11;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int a10sr_reset_update(struct reset_controller_dev *rcdev,
+			      unsigned long id, bool assert)
+{
+	struct a10sr_reset *a10r = to_a10sr_rst(rcdev);
+	int offset = a10sr_reset_shift(id);
+	u8 mask = ALTR_A10SR_REG_BIT_MASK(offset);
+	int index = ALTR_A10SR_HPS_RST_REG + ALTR_A10SR_REG_OFFSET(offset);
+
+	return regmap_update_bits(a10r->regmap, index, mask, assert ? 0 : mask);
+}
+
+static int a10sr_reset_assert(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	return a10sr_reset_update(rcdev, id, true);
+}
+
+static int a10sr_reset_deassert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	return a10sr_reset_update(rcdev, id, false);
+}
+
+static int a10sr_reset_status(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	int ret;
+	struct a10sr_reset *a10r = to_a10sr_rst(rcdev);
+	int offset = a10sr_reset_shift(id);
+	u8 mask = ALTR_A10SR_REG_BIT_MASK(offset);
+	int index = ALTR_A10SR_HPS_RST_REG + ALTR_A10SR_REG_OFFSET(offset);
+	unsigned int value;
+
+	ret = regmap_read(a10r->regmap, index, &value);
+	if (ret < 0)
+		return ret;
+
+	return !!(value & mask);
+}
+
+static const struct reset_control_ops a10sr_reset_ops = {
+	.assert		= a10sr_reset_assert,
+	.deassert	= a10sr_reset_deassert,
+	.status		= a10sr_reset_status,
+};
+
+static int a10sr_reset_probe(struct platform_device *pdev)
+{
+	struct altr_a10sr *a10sr = dev_get_drvdata(pdev->dev.parent);
+	struct a10sr_reset *a10r;
+
+	a10r = devm_kzalloc(&pdev->dev, sizeof(struct a10sr_reset),
+			    GFP_KERNEL);
+	if (!a10r)
+		return -ENOMEM;
+
+	a10r->rcdev.owner = THIS_MODULE;
+	a10r->rcdev.nr_resets = A10SR_RESET_NUM;
+	a10r->rcdev.ops = &a10sr_reset_ops;
+	a10r->rcdev.of_node = pdev->dev.of_node;
+	a10r->regmap = a10sr->regmap;
+
+	platform_set_drvdata(pdev, a10r);
+
+	return devm_reset_controller_register(&pdev->dev, &a10r->rcdev);
+}
+
+static const struct of_device_id a10sr_reset_of_match[] = {
+	{ .compatible = "altr,a10sr-reset" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, a10sr_reset_of_match);
+
+static struct platform_driver a10sr_reset_driver = {
+	.probe	= a10sr_reset_probe,
+	.driver = {
+		.name		= "altr_a10sr_reset",
+	},
+};
+module_platform_driver(a10sr_reset_driver);
+
+MODULE_AUTHOR("Thor Thayer <thor.thayer@linux.intel.com>");
+MODULE_DESCRIPTION("Altera Arria10 System Resource Reset Controller Driver");
+MODULE_LICENSE("GPL v2");

drivers/reset/reset-ath79.c

 /*
+ * AR71xx Reset Controller Driver
+ * Author: Alban Bedel
+ *
  * Copyright (C) 2015 Alban Bedel <albeu@free.fr>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -13,7 +16,7 @@
  */
 
 #include <linux/io.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/reset-controller.h>
 #include <linux/reboot.h>
@@ -127,31 +130,17 @@ static int ath79_reset_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int ath79_reset_remove(struct platform_device *pdev)
-{
-	struct ath79_reset *ath79_reset = platform_get_drvdata(pdev);
-
-	unregister_restart_handler(&ath79_reset->restart_nb);
-
-	return 0;
-}
-
 static const struct of_device_id ath79_reset_dt_ids[] = {
 	{ .compatible = "qca,ar7100-reset", },
 	{ },
 };
-MODULE_DEVICE_TABLE(of, ath79_reset_dt_ids);
 
 static struct platform_driver ath79_reset_driver = {
 	.probe	= ath79_reset_probe,
-	.remove = ath79_reset_remove,
 	.driver = {
 		.name			= "ath79-reset",
 		.of_match_table		= ath79_reset_dt_ids,
+		.suppress_bind_attrs	= true,
 	},
 };
-module_platform_driver(ath79_reset_driver);
-
-MODULE_AUTHOR("Alban Bedel <albeu@free.fr>");
-MODULE_DESCRIPTION("AR71xx Reset Controller Driver");
-MODULE_LICENSE("GPL");
+builtin_platform_driver(ath79_reset_driver);

drivers/reset/reset-imx7.c

+/*
+ * Copyright (c) 2017, Impinj, Inc.
+ *
+ * i.MX7 System Reset Controller (SRC) driver
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/regmap.h>
+#include <dt-bindings/reset/imx7-reset.h>
+
+struct imx7_src {
+	struct reset_controller_dev rcdev;
+	struct regmap *regmap;
+};
+
+enum imx7_src_registers {
+	SRC_A7RCR0		= 0x0004,
+	SRC_M4RCR		= 0x000c,
+	SRC_ERCR		= 0x0014,
+	SRC_HSICPHY_RCR		= 0x001c,
+	SRC_USBOPHY1_RCR	= 0x0020,
+	SRC_USBOPHY2_RCR	= 0x0024,
+	SRC_MIPIPHY_RCR		= 0x0028,
+	SRC_PCIEPHY_RCR		= 0x002c,
+	SRC_DDRC_RCR		= 0x1000,
+};
+
+struct imx7_src_signal {
+	unsigned int offset, bit;
+};
+
+static const struct imx7_src_signal imx7_src_signals[IMX7_RESET_NUM] = {
+	[IMX7_RESET_A7_CORE_POR_RESET0] = { SRC_A7RCR0, BIT(0) },
+	[IMX7_RESET_A7_CORE_POR_RESET1] = { SRC_A7RCR0, BIT(1) },
+	[IMX7_RESET_A7_CORE_RESET0]     = { SRC_A7RCR0, BIT(4) },
+	[IMX7_RESET_A7_CORE_RESET1]	= { SRC_A7RCR0, BIT(5) },
+	[IMX7_RESET_A7_DBG_RESET0]	= { SRC_A7RCR0, BIT(8) },
+	[IMX7_RESET_A7_DBG_RESET1]	= { SRC_A7RCR0, BIT(9) },
+	[IMX7_RESET_A7_ETM_RESET0]	= { SRC_A7RCR0, BIT(12) },
+	[IMX7_RESET_A7_ETM_RESET1]	= { SRC_A7RCR0, BIT(13) },
+	[IMX7_RESET_A7_SOC_DBG_RESET]	= { SRC_A7RCR0, BIT(20) },
+	[IMX7_RESET_A7_L2RESET]		= { SRC_A7RCR0, BIT(21) },
+	[IMX7_RESET_SW_M4C_RST]		= { SRC_M4RCR, BIT(1) },
+	[IMX7_RESET_SW_M4P_RST]		= { SRC_M4RCR, BIT(2) },
+	[IMX7_RESET_EIM_RST]		= { SRC_ERCR, BIT(0) },
+	[IMX7_RESET_HSICPHY_PORT_RST]	= { SRC_HSICPHY_RCR, BIT(1) },
+	[IMX7_RESET_USBPHY1_POR]	= { SRC_USBOPHY1_RCR, BIT(0) },
+	[IMX7_RESET_USBPHY1_PORT_RST]	= { SRC_USBOPHY1_RCR, BIT(1) },
+	[IMX7_RESET_USBPHY2_POR]	= { SRC_USBOPHY2_RCR, BIT(0) },
+	[IMX7_RESET_USBPHY2_PORT_RST]	= { SRC_USBOPHY2_RCR, BIT(1) },
+	[IMX7_RESET_MIPI_PHY_MRST]	= { SRC_MIPIPHY_RCR, BIT(1) },
+	[IMX7_RESET_MIPI_PHY_SRST]	= { SRC_MIPIPHY_RCR, BIT(2) },
+	[IMX7_RESET_PCIEPHY]		= { SRC_PCIEPHY_RCR, BIT(2) | BIT(1) },
+	[IMX7_RESET_PCIEPHY_PERST]	= { SRC_PCIEPHY_RCR, BIT(3) },
+	[IMX7_RESET_PCIE_CTRL_APPS_EN]	= { SRC_PCIEPHY_RCR, BIT(6) },
+	[IMX7_RESET_DDRC_PRST]		= { SRC_DDRC_RCR, BIT(0) },
+	[IMX7_RESET_DDRC_CORE_RST]	= { SRC_DDRC_RCR, BIT(1) },
+};
+
+static struct imx7_src *to_imx7_src(struct reset_controller_dev *rcdev)
+{
+	return container_of(rcdev, struct imx7_src, rcdev);
+}
+
+static int imx7_reset_set(struct reset_controller_dev *rcdev,
+			  unsigned long id, bool assert)
+{
+	struct imx7_src *imx7src = to_imx7_src(rcdev);
+	const struct imx7_src_signal *signal = &imx7_src_signals[id];
+	unsigned int value = 0;
+
+	switch (id) {
+	case IMX7_RESET_PCIEPHY:
+		/*
+		 * wait for more than 10us to release phy g_rst and
+		 * btnrst
+		 */
+		if (!assert)
+			udelay(10);
+		break;
+
+	case IMX7_RESET_PCIE_CTRL_APPS_EN:
+		value = (assert) ? 0 : signal->bit;
+		break;
+	}
+
+	return regmap_update_bits(imx7src->regmap,
+				  signal->offset, signal->bit, value);
+}
+
+static int imx7_reset_assert(struct reset_controller_dev *rcdev,
+			     unsigned long id)
+{
+	return imx7_reset_set(rcdev, id, true);
+}
+
+static int imx7_reset_deassert(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	return imx7_reset_set(rcdev, id, false);
+}
+
+static const struct reset_control_ops imx7_reset_ops = {
+	.assert		= imx7_reset_assert,
+	.deassert	= imx7_reset_deassert,
+};
+
+static int imx7_reset_probe(struct platform_device *pdev)
+{
+	struct imx7_src *imx7src;
+	struct device *dev = &pdev->dev;
+	struct regmap_config config = { .name = "src" };
+
+	imx7src = devm_kzalloc(dev, sizeof(*imx7src), GFP_KERNEL);
+	if (!imx7src)
+		return -ENOMEM;
+
+	imx7src->regmap = syscon_node_to_regmap(dev->of_node);
+	if (IS_ERR(imx7src->regmap)) {
+		dev_err(dev, "Unable to get imx7-src regmap");
+		return PTR_ERR(imx7src->regmap);
+	}
+	regmap_attach_dev(dev, imx7src->regmap, &config);
+
+	imx7src->rcdev.owner     = THIS_MODULE;
+	imx7src->rcdev.nr_resets = IMX7_RESET_NUM;
+	imx7src->rcdev.ops       = &imx7_reset_ops;
+	imx7src->rcdev.of_node   = dev->of_node;
+
+	return devm_reset_controller_register(dev, &imx7src->rcdev);
+}
+
+static const struct of_device_id imx7_reset_dt_ids[] = {
+	{ .compatible = "fsl,imx7d-src", },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver imx7_reset_driver = {
+	.probe	= imx7_reset_probe,
+	.driver = {
+		.name		= KBUILD_MODNAME,
+		.of_match_table	= imx7_reset_dt_ids,
+	},
+};
+builtin_platform_driver(imx7_reset_driver);

drivers/reset/reset-meson.c

 /*
+ * Amlogic Meson Reset Controller driver
+ *
  * This file is provided under a dual BSD/GPLv2 license.  When using or
  * redistributing this file, you may do so under either license.
  *
@@ -53,7 +55,7 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 #include <linux/err.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
@@ -95,7 +97,6 @@ static const struct of_device_id meson_reset_dt_ids[] = {
 	 { .compatible = "amlogic,meson-gxbb-reset", },
 	 { /* sentinel */ },
 };
-MODULE_DEVICE_TABLE(of, meson_reset_dt_ids);
 
 static int meson_reset_probe(struct platform_device *pdev)
 {
@@ -128,9 +129,4 @@ static struct platform_driver meson_reset_driver = {
 		.of_match_table	= meson_reset_dt_ids,
 	},
 };
-
-module_platform_driver(meson_reset_driver);
-
-MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
-MODULE_DESCRIPTION("Amlogic Meson Reset Controller driver");
-MODULE_LICENSE("Dual BSD/GPL");
+builtin_platform_driver(meson_reset_driver);

drivers/reset/reset-oxnas.c

@@ -18,7 +18,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/err.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/reset-controller.h>
@@ -83,7 +83,6 @@ static const struct of_device_id oxnas_reset_dt_ids[] = {
 	 { .compatible = "oxsemi,ox820-reset", },
 	 { /* sentinel */ },
 };
-MODULE_DEVICE_TABLE(of, oxnas_reset_dt_ids);
 
 static int oxnas_reset_probe(struct platform_device *pdev)
 {
@@ -123,5 +122,4 @@ static struct platform_driver oxnas_reset_driver = {
 		.of_match_table	= oxnas_reset_dt_ids,
 	},
 };
-
-module_platform_driver(oxnas_reset_driver);
+builtin_platform_driver(oxnas_reset_driver);

drivers/reset/reset-pistachio.c

@@ -10,7 +10,7 @@
  * version 2, as published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
@@ -128,7 +128,6 @@ static const struct of_device_id pistachio_reset_dt_ids[] = {
 	 { .compatible = "img,pistachio-reset", },
 	 { /* sentinel */ },
 };
-MODULE_DEVICE_TABLE(of, pistachio_reset_dt_ids);
 
 static struct platform_driver pistachio_reset_driver = {
 	.probe	= pistachio_reset_probe,
@@ -137,8 +136,4 @@ static struct platform_driver pistachio_reset_driver = {
 		.of_match_table	= pistachio_reset_dt_ids,
 	},
 };
-module_platform_driver(pistachio_reset_driver);
-
-MODULE_AUTHOR("Damien Horsley <Damien.Horsley@imgtec.com>");
-MODULE_DESCRIPTION("Pistacho Reset Controller Driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(pistachio_reset_driver);

drivers/reset/reset-socfpga.c

@@ -25,7 +25,8 @@
 #include <linux/spinlock.h>
 #include <linux/types.h>
 
-#define NR_BANKS		4
+#define BANK_INCREMENT		4
+#define NR_BANKS		8
 
 struct socfpga_reset_data {
 	spinlock_t			lock;
@@ -46,8 +47,8 @@ static int socfpga_reset_assert(struct reset_controller_dev *rcdev,
 
 	spin_lock_irqsave(&data->lock, flags);
 
-	reg = readl(data->membase + (bank * NR_BANKS));
-	writel(reg | BIT(offset), data->membase + (bank * NR_BANKS));
+	reg = readl(data->membase + (bank * BANK_INCREMENT));
+	writel(reg | BIT(offset), data->membase + (bank * BANK_INCREMENT));
 	spin_unlock_irqrestore(&data->lock, flags);
 
 	return 0;
@@ -67,8 +68,8 @@ static int socfpga_reset_deassert(struct reset_controller_dev *rcdev,
 
 	spin_lock_irqsave(&data->lock, flags);
 
-	reg = readl(data->membase + (bank * NR_BANKS));
-	writel(reg & ~BIT(offset), data->membase + (bank * NR_BANKS));
+	reg = readl(data->membase + (bank * BANK_INCREMENT));
+	writel(reg & ~BIT(offset), data->membase + (bank * BANK_INCREMENT));
 
 	spin_unlock_irqrestore(&data->lock, flags);
 
@@ -84,7 +85,7 @@ static int socfpga_reset_status(struct reset_controller_dev *rcdev,
 	int offset = id % BITS_PER_LONG;
 	u32 reg;
 
-	reg = readl(data->membase + (bank * NR_BANKS));
+	reg = readl(data->membase + (bank * BANK_INCREMENT));
 
 	return !(reg & BIT(offset));
 }

drivers/reset/reset-sunxi.c

@@ -34,15 +34,16 @@ static int sunxi_reset_assert(struct reset_controller_dev *rcdev,
 	struct sunxi_reset_data *data = container_of(rcdev,
 						     struct sunxi_reset_data,
 						     rcdev);
-	int bank = id / BITS_PER_LONG;
-	int offset = id % BITS_PER_LONG;
+	int reg_width = sizeof(u32);
+	int bank = id / (reg_width * BITS_PER_BYTE);
+	int offset = id % (reg_width * BITS_PER_BYTE);
 	unsigned long flags;
 	u32 reg;
 
 	spin_lock_irqsave(&data->lock, flags);
 
-	reg = readl(data->membase + (bank * 4));
-	writel(reg & ~BIT(offset), data->membase + (bank * 4));
+	reg = readl(data->membase + (bank * reg_width));
+	writel(reg & ~BIT(offset), data->membase + (bank * reg_width));
 
 	spin_unlock_irqrestore(&data->lock, flags);
 
@@ -55,15 +56,16 @@ static int sunxi_reset_deassert(struct reset_controller_dev *rcdev,
 	struct sunxi_reset_data *data = container_of(rcdev,
 						     struct sunxi_reset_data,
 						     rcdev);
-	int bank = id / BITS_PER_LONG;
-	int offset = id % BITS_PER_LONG;
+	int reg_width = sizeof(u32);
+	int bank = id / (reg_width * BITS_PER_BYTE);
+	int offset = id % (reg_width * BITS_PER_BYTE);
 	unsigned long flags;
 	u32 reg;
 
 	spin_lock_irqsave(&data->lock, flags);
 
-	reg = readl(data->membase + (bank * 4));
-	writel(reg | BIT(offset), data->membase + (bank * 4));
+	reg = readl(data->membase + (bank * reg_width));
+	writel(reg | BIT(offset), data->membase + (bank * reg_width));
 
 	spin_unlock_irqrestore(&data->lock, flags);
 

drivers/reset/reset-uniphier.c

@@ -50,6 +50,15 @@ struct uniphier_reset_data {
 	}
 
 /* System reset data */
+#define UNIPHIER_SLD3_SYS_RESET_NAND(id)		\
+	UNIPHIER_RESETX((id), 0x2004, 2)
+
+#define UNIPHIER_LD11_SYS_RESET_NAND(id)		\
+	UNIPHIER_RESETX((id), 0x200c, 0)
+
+#define UNIPHIER_LD11_SYS_RESET_EMMC(id)		\
+	UNIPHIER_RESETX((id), 0x200c, 2)
+
 #define UNIPHIER_SLD3_SYS_RESET_STDMAC(id)		\
 	UNIPHIER_RESETX((id), 0x2000, 10)
 
@@ -65,12 +74,14 @@ struct uniphier_reset_data {
 #define UNIPHIER_PRO4_SYS_RESET_USB3(id, ch)		\
 	UNIPHIER_RESETX((id), 0x2000 + 0x4 * (ch), 17)
 
-const struct uniphier_reset_data uniphier_sld3_sys_reset_data[] = {
+static const struct uniphier_reset_data uniphier_sld3_sys_reset_data[] = {
+	UNIPHIER_SLD3_SYS_RESET_NAND(2),
 	UNIPHIER_SLD3_SYS_RESET_STDMAC(8),	/* Ether, HSC, MIO */
 	UNIPHIER_RESET_END,
 };
 
-const struct uniphier_reset_data uniphier_pro4_sys_reset_data[] = {
+static const struct uniphier_reset_data uniphier_pro4_sys_reset_data[] = {
+	UNIPHIER_SLD3_SYS_RESET_NAND(2),
 	UNIPHIER_SLD3_SYS_RESET_STDMAC(8),	/* HSC, MIO, RLE */
 	UNIPHIER_PRO4_SYS_RESET_GIO(12),	/* Ether, SATA, USB3 */
 	UNIPHIER_PRO4_SYS_RESET_USB3(14, 0),
@@ -78,7 +89,8 @@ const struct uniphier_reset_data uniphier_pro4_sys_reset_data[] = {
 	UNIPHIER_RESET_END,
 };
 
-const struct uniphier_reset_data uniphier_pro5_sys_reset_data[] = {
+static const struct uniphier_reset_data uniphier_pro5_sys_reset_data[] = {
+	UNIPHIER_SLD3_SYS_RESET_NAND(2),
 	UNIPHIER_SLD3_SYS_RESET_STDMAC(8),	/* HSC */
 	UNIPHIER_PRO4_SYS_RESET_GIO(12),	/* PCIe, USB3 */
 	UNIPHIER_PRO4_SYS_RESET_USB3(14, 0),
@@ -86,7 +98,8 @@ const struct uniphier_reset_data uniphier_pro5_sys_reset_data[] = {
 	UNIPHIER_RESET_END,
 };
 
-const struct uniphier_reset_data uniphier_pxs2_sys_reset_data[] = {
+static const struct uniphier_reset_data uniphier_pxs2_sys_reset_data[] = {
+	UNIPHIER_SLD3_SYS_RESET_NAND(2),
 	UNIPHIER_SLD3_SYS_RESET_STDMAC(8),	/* HSC, RLE */
 	UNIPHIER_PRO4_SYS_RESET_USB3(14, 0),
 	UNIPHIER_PRO4_SYS_RESET_USB3(15, 1),
@@ -100,12 +113,16 @@ const struct uniphier_reset_data uniphier_pxs2_sys_reset_data[] = {
 	UNIPHIER_RESET_END,
 };
 
-const struct uniphier_reset_data uniphier_ld11_sys_reset_data[] = {
+static const struct uniphier_reset_data uniphier_ld11_sys_reset_data[] = {
+	UNIPHIER_LD11_SYS_RESET_NAND(2),
+	UNIPHIER_LD11_SYS_RESET_EMMC(4),
 	UNIPHIER_LD11_SYS_RESET_STDMAC(8),	/* HSC, MIO */
 	UNIPHIER_RESET_END,
 };
 
-const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
+static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
+	UNIPHIER_LD11_SYS_RESET_NAND(2),
+	UNIPHIER_LD11_SYS_RESET_EMMC(4),
 	UNIPHIER_LD11_SYS_RESET_STDMAC(8),	/* HSC */
 	UNIPHIER_LD20_SYS_RESET_GIO(12),	/* PCIe, USB3 */
 	UNIPHIER_RESETX(16, 0x200c, 12),	/* USB30-PHY0 */
@@ -134,7 +151,7 @@ const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
 #define UNIPHIER_MIO_RESET_DMAC(id)			\
 	UNIPHIER_RESETX((id), 0x110, 17)
 
-const struct uniphier_reset_data uniphier_sld3_mio_reset_data[] = {
+static const struct uniphier_reset_data uniphier_sld3_mio_reset_data[] = {
 	UNIPHIER_MIO_RESET_SD(0, 0),
 	UNIPHIER_MIO_RESET_SD(1, 1),
 	UNIPHIER_MIO_RESET_SD(2, 2),
@@ -154,7 +171,7 @@ const struct uniphier_reset_data uniphier_sld3_mio_reset_data[] = {
 	UNIPHIER_RESET_END,
 };
 
-const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = {
+static const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = {
 	UNIPHIER_MIO_RESET_SD(0, 0),
 	UNIPHIER_MIO_RESET_SD(1, 1),
 	UNIPHIER_MIO_RESET_EMMC_HW_RESET(6, 1),
@@ -171,7 +188,7 @@ const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = {
 #define UNIPHIER_PERI_RESET_FI2C(id, ch)		\
 	UNIPHIER_RESETX((id), 0x114, 24 + (ch))
 
-const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
+static const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
 	UNIPHIER_PERI_RESET_UART(0, 0),
 	UNIPHIER_PERI_RESET_UART(1, 1),
 	UNIPHIER_PERI_RESET_UART(2, 2),
@@ -184,7 +201,7 @@ const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
 	UNIPHIER_RESET_END,
 };
 
-const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = {
+static const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = {
 	UNIPHIER_PERI_RESET_UART(0, 0),
 	UNIPHIER_PERI_RESET_UART(1, 1),
 	UNIPHIER_PERI_RESET_UART(2, 2),

drivers/soc/Kconfig

@@ -3,6 +3,7 @@ menu "SOC (System On Chip) specific Drivers"
 source "drivers/soc/atmel/Kconfig"
 source "drivers/soc/bcm/Kconfig"
 source "drivers/soc/fsl/Kconfig"
+source "drivers/soc/imx/Kconfig"
 source "drivers/soc/mediatek/Kconfig"
 source "drivers/soc/qcom/Kconfig"
 source "drivers/soc/rockchip/Kconfig"

drivers/soc/Makefile

@@ -7,6 +7,7 @@ obj-y				+= bcm/
 obj-$(CONFIG_ARCH_DOVE)		+= dove/
 obj-$(CONFIG_MACH_DOVE)		+= dove/
 obj-y				+= fsl/
+obj-$(CONFIG_ARCH_MXC)		+= imx/
 obj-$(CONFIG_ARCH_MEDIATEK)	+= mediatek/
 obj-$(CONFIG_ARCH_QCOM)		+= qcom/
 obj-$(CONFIG_ARCH_RENESAS)	+= renesas/

drivers/soc/bcm/brcmstb/common.c

@@ -41,6 +41,15 @@ bool soc_is_brcmstb(void)
 }
 
 static const struct of_device_id sun_top_ctrl_match[] = {
+	{ .compatible = "brcm,bcm7125-sun-top-ctrl", },
+	{ .compatible = "brcm,bcm7346-sun-top-ctrl", },
+	{ .compatible = "brcm,bcm7358-sun-top-ctrl", },
+	{ .compatible = "brcm,bcm7360-sun-top-ctrl", },
+	{ .compatible = "brcm,bcm7362-sun-top-ctrl", },
+	{ .compatible = "brcm,bcm7420-sun-top-ctrl", },
+	{ .compatible = "brcm,bcm7425-sun-top-ctrl", },
+	{ .compatible = "brcm,bcm7429-sun-top-ctrl", },
+	{ .compatible = "brcm,bcm7425-sun-top-ctrl", },
 	{ .compatible = "brcm,brcmstb-sun-top-ctrl", },
 	{ }
 };

drivers/soc/imx/Kconfig

+menu "i.MX SoC drivers"
+
+config IMX7_PM_DOMAINS
+	bool "i.MX7 PM domains"
+	select PM_GENERIC_DOMAINS
+	depends on SOC_IMX7D || (COMPILE_TEST && OF)
+	default y if SOC_IMX7D
+
+endmenu

drivers/soc/imx/Makefile

+obj-y += gpc.o
+obj-$(CONFIG_IMX7_PM_DOMAINS) += gpcv2.o

drivers/soc/imx/gpcv2.c

+/*
+ * Copyright 2017 Impinj, Inc
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * Based on the code of analogus driver:
+ *
+ * Copyright 2015-2017 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <dt-bindings/power/imx7-power.h>
+
+#define GPC_LPCR_A7_BSC			0x000
+
+#define GPC_PGC_CPU_MAPPING		0x0ec
+#define USB_HSIC_PHY_A7_DOMAIN		BIT(6)
+#define USB_OTG2_PHY_A7_DOMAIN		BIT(5)
+#define USB_OTG1_PHY_A7_DOMAIN		BIT(4)
+#define PCIE_PHY_A7_DOMAIN		BIT(3)
+#define MIPI_PHY_A7_DOMAIN		BIT(2)
+
+#define GPC_PU_PGC_SW_PUP_REQ		0x0f8
+#define GPC_PU_PGC_SW_PDN_REQ		0x104
+#define USB_HSIC_PHY_SW_Pxx_REQ		BIT(4)
+#define USB_OTG2_PHY_SW_Pxx_REQ		BIT(3)
+#define USB_OTG1_PHY_SW_Pxx_REQ		BIT(2)
+#define PCIE_PHY_SW_Pxx_REQ		BIT(1)
+#define MIPI_PHY_SW_Pxx_REQ		BIT(0)
+
+#define GPC_M4_PU_PDN_FLG		0x1bc
+
+
+#define PGC_MIPI			4
+#define PGC_PCIE			5
+#define PGC_USB_HSIC			8
+#define GPC_PGC_CTRL(n)			(0x800 + (n) * 0x40)
+#define GPC_PGC_SR(n)			(GPC_PGC_CTRL(n) + 0xc)
+
+#define GPC_PGC_CTRL_PCR		BIT(0)
+
+struct imx7_pgc_domain {
+	struct generic_pm_domain genpd;
+	struct regmap *regmap;
+	struct regulator *regulator;
+
+	unsigned int pgc;
+
+	const struct {
+		u32 pxx;
+		u32 map;
+	} bits;
+
+	const int voltage;
+	struct device *dev;
+};
+
+static int imx7_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
+				      bool on)
+{
+	struct imx7_pgc_domain *domain = container_of(genpd,
+						      struct imx7_pgc_domain,
+						      genpd);
+	unsigned int offset = on ?
+		GPC_PU_PGC_SW_PUP_REQ : GPC_PU_PGC_SW_PDN_REQ;
+	const bool enable_power_control = !on;
+	const bool has_regulator = !IS_ERR(domain->regulator);
+	unsigned long deadline;
+	int ret = 0;
+
+	regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
+			   domain->bits.map, domain->bits.map);
+
+	if (has_regulator && on) {
+		ret = regulator_enable(domain->regulator);
+		if (ret) {
+			dev_err(domain->dev, "failed to enable regulator\n");
+			goto unmap;
+		}
+	}
+
+	if (enable_power_control)
+		regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
+				   GPC_PGC_CTRL_PCR, GPC_PGC_CTRL_PCR);
+
+	regmap_update_bits(domain->regmap, offset,
+			   domain->bits.pxx, domain->bits.pxx);
+
+	/*
+	 * As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
+	 * for PUP_REQ/PDN_REQ bit to be cleared
+	 */
+	deadline = jiffies + msecs_to_jiffies(1);
+	while (true) {
+		u32 pxx_req;
+
+		regmap_read(domain->regmap, offset, &pxx_req);
+
+		if (!(pxx_req & domain->bits.pxx))
+			break;
+
+		if (time_after(jiffies, deadline)) {
+			dev_err(domain->dev, "falied to command PGC\n");
+			ret = -ETIMEDOUT;
+			/*
+			 * If we were in a process of enabling a
+			 * domain and failed we might as well disable
+			 * the regulator we just enabled. And if it
+			 * was the opposite situation and we failed to
+			 * power down -- keep the regulator on
+			 */
+			on = !on;
+			break;
+		}
+
+		cpu_relax();
+	}
+
+	if (enable_power_control)
+		regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
+				   GPC_PGC_CTRL_PCR, 0);
+
+	if (has_regulator && !on) {
+		int err;
+
+		err = regulator_disable(domain->regulator);
+		if (err)
+			dev_err(domain->dev,
+				"failed to disable regulator: %d\n", ret);
+		/* Preserve earlier error code */
+		ret = ret ?: err;
+	}
+unmap:
+	regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
+			   domain->bits.map, 0);
+	return ret;
+}
+
+static int imx7_gpc_pu_pgc_sw_pup_req(struct generic_pm_domain *genpd)
+{
+	return imx7_gpc_pu_pgc_sw_pxx_req(genpd, true);
+}
+
+static int imx7_gpc_pu_pgc_sw_pdn_req(struct generic_pm_domain *genpd)
+{
+	return imx7_gpc_pu_pgc_sw_pxx_req(genpd, false);
+}
+
+static struct imx7_pgc_domain imx7_pgc_domains[] = {
+	[IMX7_POWER_DOMAIN_MIPI_PHY] = {
+		.genpd = {
+			.name      = "mipi-phy",
+		},
+		.bits  = {
+			.pxx = MIPI_PHY_SW_Pxx_REQ,
+			.map = MIPI_PHY_A7_DOMAIN,
+		},
+		.voltage   = 1000000,
+		.pgc	   = PGC_MIPI,
+	},
+
+	[IMX7_POWER_DOMAIN_PCIE_PHY] = {
+		.genpd = {
+			.name      = "pcie-phy",
+		},
+		.bits  = {
+			.pxx = PCIE_PHY_SW_Pxx_REQ,
+			.map = PCIE_PHY_A7_DOMAIN,
+		},
+		.voltage   = 1000000,
+		.pgc	   = PGC_PCIE,
+	},
+
+	[IMX7_POWER_DOMAIN_USB_HSIC_PHY] = {
+		.genpd = {
+			.name      = "usb-hsic-phy",
+		},
+		.bits  = {
+			.pxx = USB_HSIC_PHY_SW_Pxx_REQ,
+			.map = USB_HSIC_PHY_A7_DOMAIN,
+		},
+		.voltage   = 1200000,
+		.pgc	   = PGC_USB_HSIC,
+	},
+};
+
+static int imx7_pgc_domain_probe(struct platform_device *pdev)
+{
+	struct imx7_pgc_domain *domain = pdev->dev.platform_data;
+	int ret;
+
+	domain->dev = &pdev->dev;
+
+	ret = pm_genpd_init(&domain->genpd, NULL, true);
+	if (ret) {
+		dev_err(domain->dev, "Failed to init power domain\n");
+		return ret;
+	}
+
+	domain->regulator = devm_regulator_get_optional(domain->dev, "power");
+	if (IS_ERR(domain->regulator)) {
+		if (PTR_ERR(domain->regulator) != -ENODEV) {
+			dev_err(domain->dev, "Failed to get domain's regulator\n");
+			return PTR_ERR(domain->regulator);
+		}
+	} else {
+		regulator_set_voltage(domain->regulator,
+				      domain->voltage, domain->voltage);
+	}
+
+	ret = of_genpd_add_provider_simple(domain->dev->of_node,
+					   &domain->genpd);
+	if (ret) {
+		dev_err(domain->dev, "Failed to add genpd provider\n");
+		pm_genpd_remove(&domain->genpd);
+	}
+
+	return ret;
+}
+
+static int imx7_pgc_domain_remove(struct platform_device *pdev)
+{
+	struct imx7_pgc_domain *domain = pdev->dev.platform_data;
+
+	of_genpd_del_provider(domain->dev->of_node);
+	pm_genpd_remove(&domain->genpd);
+
+	return 0;
+}
+
+static const struct platform_device_id imx7_pgc_domain_id[] = {
+	{ "imx7-pgc-domain", },
+	{ },
+};
+
+static struct platform_driver imx7_pgc_domain_driver = {
+	.driver = {
+		.name = "imx7-pgc",
+	},
+	.probe    = imx7_pgc_domain_probe,
+	.remove   = imx7_pgc_domain_remove,
+	.id_table = imx7_pgc_domain_id,
+};
+builtin_platform_driver(imx7_pgc_domain_driver)
+
+static int imx_gpcv2_probe(struct platform_device *pdev)
+{
+	static const struct regmap_range yes_ranges[] = {
+		regmap_reg_range(GPC_LPCR_A7_BSC,
+				 GPC_M4_PU_PDN_FLG),
+		regmap_reg_range(GPC_PGC_CTRL(PGC_MIPI),
+				 GPC_PGC_SR(PGC_MIPI)),
+		regmap_reg_range(GPC_PGC_CTRL(PGC_PCIE),
+				 GPC_PGC_SR(PGC_PCIE)),
+		regmap_reg_range(GPC_PGC_CTRL(PGC_USB_HSIC),
+				 GPC_PGC_SR(PGC_USB_HSIC)),
+	};
+	static const struct regmap_access_table access_table = {
+		.yes_ranges	= yes_ranges,
+		.n_yes_ranges	= ARRAY_SIZE(yes_ranges),
+	};
+	static const struct regmap_config regmap_config = {
+		.reg_bits	= 32,
+		.val_bits	= 32,
+		.reg_stride	= 4,
+		.rd_table	= &access_table,
+		.wr_table	= &access_table,
+		.max_register   = SZ_4K,
+	};
+	struct device *dev = &pdev->dev;
+	struct device_node *pgc_np, *np;
+	struct regmap *regmap;
+	struct resource *res;
+	void __iomem *base;
+	int ret;
+
+	pgc_np = of_get_child_by_name(dev->of_node, "pgc");
+	if (!pgc_np) {
+		dev_err(dev, "No power domains specified in DT\n");
+		return -EINVAL;
+	}
+
+	res  = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	regmap = devm_regmap_init_mmio(dev, base, &regmap_config);
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		dev_err(dev, "failed to init regmap (%d)\n", ret);
+		return ret;
+	}
+
+	for_each_child_of_node(pgc_np, np) {
+		struct platform_device *pd_pdev;
+		struct imx7_pgc_domain *domain;
+		u32 domain_index;
+
+		ret = of_property_read_u32(np, "reg", &domain_index);
+		if (ret) {
+			dev_err(dev, "Failed to read 'reg' property\n");
+			of_node_put(np);
+			return ret;
+		}
+
+		if (domain_index >= ARRAY_SIZE(imx7_pgc_domains)) {
+			dev_warn(dev,
+				 "Domain index %d is out of bounds\n",
+				 domain_index);
+			continue;
+		}
+
+		domain = &imx7_pgc_domains[domain_index];
+		domain->regmap = regmap;
+		domain->genpd.power_on  = imx7_gpc_pu_pgc_sw_pup_req;
+		domain->genpd.power_off = imx7_gpc_pu_pgc_sw_pdn_req;
+
+		pd_pdev = platform_device_alloc("imx7-pgc-domain",
+						domain_index);
+		if (!pd_pdev) {
+			dev_err(dev, "Failed to allocate platform device\n");
+			of_node_put(np);
+			return -ENOMEM;
+		}
+
+		pd_pdev->dev.platform_data = domain;
+		pd_pdev->dev.parent = dev;
+		pd_pdev->dev.of_node = np;
+
+		ret = platform_device_add(pd_pdev);
+		if (ret) {
+			platform_device_put(pd_pdev);
+			of_node_put(np);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct of_device_id imx_gpcv2_dt_ids[] = {
+	{ .compatible = "fsl,imx7d-gpc" },
+	{ }
+};
+
+static struct platform_driver imx_gpc_driver = {
+	.driver = {
+		.name = "imx-gpcv2",
+		.of_match_table = imx_gpcv2_dt_ids,
+	},
+	.probe = imx_gpcv2_probe,
+};
+builtin_platform_driver(imx_gpc_driver)

drivers/soc/renesas/r8a7795-sysc.c

 /*
  * Renesas R-Car H3 System Controller
  *
- * Copyright (C) 2016 Glider bvba
+ * Copyright (C) 2016-2017 Glider bvba
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -10,12 +10,13 @@
 
 #include <linux/bug.h>
 #include <linux/kernel.h>
+#include <linux/sys_soc.h>
 
 #include <dt-bindings/power/r8a7795-sysc.h>
 
 #include "rcar-sysc.h"
 
-static const struct rcar_sysc_area r8a7795_areas[] __initconst = {
+static struct rcar_sysc_area r8a7795_areas[] __initdata = {
 	{ "always-on",	    0, 0, R8A7795_PD_ALWAYS_ON,	-1, PD_ALWAYS_ON },
 	{ "ca57-scu",	0x1c0, 0, R8A7795_PD_CA57_SCU,	R8A7795_PD_ALWAYS_ON,
 	  PD_SCU },
@@ -40,6 +41,7 @@ static const struct rcar_sysc_area r8a7795_areas[] __initconst = {
 	{ "a3vp",	0x340, 0, R8A7795_PD_A3VP,	R8A7795_PD_ALWAYS_ON },
 	{ "cr7",	0x240, 0, R8A7795_PD_CR7,	R8A7795_PD_ALWAYS_ON },
 	{ "a3vc",	0x380, 0, R8A7795_PD_A3VC,	R8A7795_PD_ALWAYS_ON },
+	/* A2VC0 exists on ES1.x only */
 	{ "a2vc0",	0x3c0, 0, R8A7795_PD_A2VC0,	R8A7795_PD_A3VC },
 	{ "a2vc1",	0x3c0, 1, R8A7795_PD_A2VC1,	R8A7795_PD_A3VC },
 	{ "3dg-a",	0x100, 0, R8A7795_PD_3DG_A,	R8A7795_PD_ALWAYS_ON },
@@ -50,7 +52,27 @@ static const struct rcar_sysc_area r8a7795_areas[] __initconst = {
 	{ "a3ir",	0x180, 0, R8A7795_PD_A3IR,	R8A7795_PD_ALWAYS_ON },
 };
 
+
+	/*
+	 * Fixups for R-Car H3 revisions after ES1.x
+	 */
+
+static const struct soc_device_attribute r8a7795es1[] __initconst = {
+	{ .soc_id = "r8a7795", .revision = "ES1.*" },
+	{ /* sentinel */ }
+};
+
+static int __init r8a7795_sysc_init(void)
+{
+	if (!soc_device_match(r8a7795es1))
+		rcar_sysc_nullify(r8a7795_areas, ARRAY_SIZE(r8a7795_areas),
+				  R8A7795_PD_A2VC0);
+
+	return 0;
+}
+
 const struct rcar_sysc_info r8a7795_sysc_info __initconst = {
+	.init = r8a7795_sysc_init,
 	.areas = r8a7795_areas,
 	.num_areas = ARRAY_SIZE(r8a7795_areas),
 };

drivers/soc/renesas/rcar-sysc.c

@@ -2,7 +2,7 @@
  * R-Car SYSC Power management support
  *
  * Copyright (C) 2014  Magnus Damm
- * Copyright (C) 2015-2016 Glider bvba
+ * Copyright (C) 2015-2017 Glider bvba
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -334,6 +334,12 @@ static int __init rcar_sysc_pd_init(void)
 
 	info = match->data;
 
+	if (info->init) {
+		error = info->init();
+		if (error)
+			return error;
+	}
+
 	has_cpg_mstp = of_find_compatible_node(NULL, NULL,
 					       "renesas,cpg-mstp-clocks");
 
@@ -377,6 +383,11 @@ static int __init rcar_sysc_pd_init(void)
 		const struct rcar_sysc_area *area = &info->areas[i];
 		struct rcar_sysc_pd *pd;
 
+		if (!area->name) {
+			/* Skip NULLified area */
+			continue;
+		}
+
 		pd = kzalloc(sizeof(*pd) + strlen(area->name) + 1, GFP_KERNEL);
 		if (!pd) {
 			error = -ENOMEM;
@@ -406,6 +417,18 @@ static int __init rcar_sysc_pd_init(void)
 }
 early_initcall(rcar_sysc_pd_init);
 
+void __init rcar_sysc_nullify(struct rcar_sysc_area *areas,
+			      unsigned int num_areas, u8 id)
+{
+	unsigned int i;
+
+	for (i = 0; i < num_areas; i++)
+		if (areas[i].isr_bit == id) {
+			areas[i].name = NULL;
+			return;
+		}
+}
+
 void __init rcar_sysc_init(phys_addr_t base, u32 syscier)
 {
 	u32 syscimr;

drivers/soc/renesas/rcar-sysc.h

@@ -46,6 +46,7 @@ struct rcar_sysc_area {
  */
 
 struct rcar_sysc_info {
+	int (*init)(void);	/* Optional */
 	const struct rcar_sysc_area *areas;
 	unsigned int num_areas;
 };
@@ -59,4 +60,13 @@ extern const struct rcar_sysc_info r8a7792_sysc_info;
 extern const struct rcar_sysc_info r8a7794_sysc_info;
 extern const struct rcar_sysc_info r8a7795_sysc_info;
 extern const struct rcar_sysc_info r8a7796_sysc_info;
+
+
+    /*
+     * Helpers for fixing up power area tables depending on SoC revision
+     */
+
+extern void rcar_sysc_nullify(struct rcar_sysc_area *areas,
+			      unsigned int num_areas, u8 id);
+
 #endif /* __SOC_RENESAS_RCAR_SYSC_H__ */

drivers/soc/renesas/renesas-soc.c

@@ -80,11 +80,21 @@ static const struct renesas_soc soc_rmobile_a1 __initconst __maybe_unused = {
 	.id	= 0x40,
 };
 
+static const struct renesas_soc soc_rz_g1h __initconst __maybe_unused = {
+	.family	= &fam_rzg,
+	.id	= 0x45,
+};
+
 static const struct renesas_soc soc_rz_g1m __initconst __maybe_unused = {
 	.family	= &fam_rzg,
 	.id	= 0x47,
 };
 
+static const struct renesas_soc soc_rz_g1n __initconst __maybe_unused = {
+	.family	= &fam_rzg,
+	.id	= 0x4b,
+};
+
 static const struct renesas_soc soc_rz_g1e __initconst __maybe_unused = {
 	.family	= &fam_rzg,
 	.id	= 0x4c,
@@ -150,9 +160,15 @@ static const struct of_device_id renesas_socs[] __initconst = {
 #ifdef CONFIG_ARCH_R8A7740
 	{ .compatible = "renesas,r8a7740",	.data = &soc_rmobile_a1 },
 #endif
+#ifdef CONFIG_ARCH_R8A7742
+	{ .compatible = "renesas,r8a7742",	.data = &soc_rz_g1h },
+#endif
 #ifdef CONFIG_ARCH_R8A7743
 	{ .compatible = "renesas,r8a7743",	.data = &soc_rz_g1m },
 #endif
+#ifdef CONFIG_ARCH_R8A7744
+	{ .compatible = "renesas,r8a7744",	.data = &soc_rz_g1n },
+#endif
 #ifdef CONFIG_ARCH_R8A7745
 	{ .compatible = "renesas,r8a7745",	.data = &soc_rz_g1e },
 #endif
@@ -254,4 +270,4 @@ static int __init renesas_soc_init(void)
 
 	return 0;
 }
-core_initcall(renesas_soc_init);
+early_initcall(renesas_soc_init);

drivers/soc/samsung/Kconfig

@@ -8,7 +8,13 @@ if SOC_SAMSUNG
 
 config EXYNOS_PMU
 	bool "Exynos PMU controller driver" if COMPILE_TEST
-	depends on (ARM && ARCH_EXYNOS) || ((ARM || ARM64) && COMPILE_TEST)
+	depends on ARCH_EXYNOS || ((ARM || ARM64) && COMPILE_TEST)
+	select EXYNOS_PMU_ARM_DRIVERS if ARM && ARCH_EXYNOS
+
+# There is no need to enable these drivers for ARMv8
+config EXYNOS_PMU_ARM_DRIVERS
+	bool "Exynos PMU ARMv7-specific driver extensions" if COMPILE_TEST
+	depends on EXYNOS_PMU
 
 config EXYNOS_PM_DOMAINS
 	bool "Exynos PM domains" if COMPILE_TEST

drivers/soc/samsung/Makefile

-obj-$(CONFIG_EXYNOS_PMU)	+= exynos-pmu.o exynos3250-pmu.o exynos4-pmu.o \
+obj-$(CONFIG_EXYNOS_PMU)	+= exynos-pmu.o
+
+obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS)	+= exynos3250-pmu.o exynos4-pmu.o \
 					exynos5250-pmu.o exynos5420-pmu.o
 obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o

drivers/soc/samsung/exynos-pmu.c

@@ -68,28 +68,38 @@ void exynos_sys_powerdown_conf(enum sys_powerdown mode)
 	}
 }
 
+/*
+ * Split the data between ARM architectures because it is relatively big
+ * and useless on other arch.
+ */
+#ifdef CONFIG_EXYNOS_PMU_ARM_DRIVERS
+#define exynos_pmu_data_arm_ptr(data)	(&data)
+#else
+#define exynos_pmu_data_arm_ptr(data)	NULL
+#endif
+
 /*
  * PMU platform driver and devicetree bindings.
  */
 static const struct of_device_id exynos_pmu_of_device_ids[] = {
 	{
 		.compatible = "samsung,exynos3250-pmu",
-		.data = &exynos3250_pmu_data,
+		.data = exynos_pmu_data_arm_ptr(exynos3250_pmu_data),
 	}, {
 		.compatible = "samsung,exynos4210-pmu",
-		.data = &exynos4210_pmu_data,
+		.data = exynos_pmu_data_arm_ptr(exynos4210_pmu_data),
 	}, {
 		.compatible = "samsung,exynos4212-pmu",
-		.data = &exynos4212_pmu_data,
+		.data = exynos_pmu_data_arm_ptr(exynos4212_pmu_data),
 	}, {
 		.compatible = "samsung,exynos4412-pmu",
-		.data = &exynos4412_pmu_data,
+		.data = exynos_pmu_data_arm_ptr(exynos4412_pmu_data),
 	}, {
 		.compatible = "samsung,exynos5250-pmu",
-		.data = &exynos5250_pmu_data,
+		.data = exynos_pmu_data_arm_ptr(exynos5250_pmu_data),
 	}, {
 		.compatible = "samsung,exynos5420-pmu",
-		.data = &exynos5420_pmu_data,
+		.data = exynos_pmu_data_arm_ptr(exynos5420_pmu_data),
 	}, {
 		.compatible = "samsung,exynos5433-pmu",
 	},

drivers/soc/samsung/exynos-pmu.h

@@ -31,6 +31,8 @@ struct exynos_pmu_data {
 };
 
 extern void __iomem *pmu_base_addr;
+
+#ifdef CONFIG_EXYNOS_PMU_ARM_DRIVERS
 /* list of all exported SoC specific data */
 extern const struct exynos_pmu_data exynos3250_pmu_data;
 extern const struct exynos_pmu_data exynos4210_pmu_data;
@@ -38,6 +40,7 @@ extern const struct exynos_pmu_data exynos4212_pmu_data;
 extern const struct exynos_pmu_data exynos4412_pmu_data;
 extern const struct exynos_pmu_data exynos5250_pmu_data;
 extern const struct exynos_pmu_data exynos5420_pmu_data;
+#endif
 
 extern void pmu_raw_writel(u32 val, u32 offset);
 extern u32 pmu_raw_readl(u32 offset);

drivers/soc/tegra/Kconfig

@@ -12,6 +12,8 @@ config ARCH_TEGRA_2x_SOC
 	select PINCTRL_TEGRA20
 	select PL310_ERRATA_727915 if CACHE_L2X0
 	select PL310_ERRATA_769419 if CACHE_L2X0
+	select SOC_TEGRA_FLOWCTRL
+	select SOC_TEGRA_PMC
 	select TEGRA_TIMER
 	help
 	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
@@ -23,6 +25,8 @@ config ARCH_TEGRA_3x_SOC
 	select ARM_ERRATA_764369 if SMP
 	select PINCTRL_TEGRA30
 	select PL310_ERRATA_769419 if CACHE_L2X0
+	select SOC_TEGRA_FLOWCTRL
+	select SOC_TEGRA_PMC
 	select TEGRA_TIMER
 	help
 	  Support for NVIDIA Tegra T30 processor family, based on the
@@ -33,6 +37,8 @@ config ARCH_TEGRA_114_SOC
 	select ARM_ERRATA_798181 if SMP
 	select HAVE_ARM_ARCH_TIMER
 	select PINCTRL_TEGRA114
+	select SOC_TEGRA_FLOWCTRL
+	select SOC_TEGRA_PMC
 	select TEGRA_TIMER
 	help
 	  Support for NVIDIA Tegra T114 processor family, based on the
@@ -42,6 +48,8 @@ config ARCH_TEGRA_124_SOC
 	bool "Enable support for Tegra124 family"
 	select HAVE_ARM_ARCH_TIMER
 	select PINCTRL_TEGRA124
+	select SOC_TEGRA_FLOWCTRL
+	select SOC_TEGRA_PMC
 	select TEGRA_TIMER
 	help
 	  Support for NVIDIA Tegra T124 processor family, based on the
@@ -55,6 +63,8 @@ if ARM64
 config ARCH_TEGRA_132_SOC
 	bool "NVIDIA Tegra132 SoC"
 	select PINCTRL_TEGRA124
+	select SOC_TEGRA_FLOWCTRL
+	select SOC_TEGRA_PMC
 	help
 	  Enable support for NVIDIA Tegra132 SoC, based on the Denver
 	  ARMv8 CPU.  The Tegra132 SoC is similar to the Tegra124 SoC,
@@ -64,6 +74,8 @@ config ARCH_TEGRA_132_SOC
 config ARCH_TEGRA_210_SOC
 	bool "NVIDIA Tegra210 SoC"
 	select PINCTRL_TEGRA210
+	select SOC_TEGRA_FLOWCTRL
+	select SOC_TEGRA_PMC
 	help
 	  Enable support for the NVIDIA Tegra210 SoC. Also known as Tegra X1,
 	  the Tegra210 has four Cortex-A57 cores paired with four Cortex-A53
@@ -83,6 +95,7 @@ config ARCH_TEGRA_186_SOC
 	select TEGRA_BPMP
 	select TEGRA_HSP_MBOX
 	select TEGRA_IVC
+	select SOC_TEGRA_PMC_TEGRA186
 	help
 	  Enable support for the NVIDIA Tegar186 SoC. The Tegra186 features a
 	  combination of Denver and Cortex-A57 CPU cores and a GPU based on
@@ -93,3 +106,12 @@ config ARCH_TEGRA_186_SOC
 
 endif
 endif
+
+config SOC_TEGRA_FLOWCTRL
+	bool
+
+config SOC_TEGRA_PMC
+	bool
+
+config SOC_TEGRA_PMC_TEGRA186
+	bool

drivers/soc/tegra/Makefile

 obj-y += fuse/
 
 obj-y += common.o
-obj-y += pmc.o
+obj-$(CONFIG_SOC_TEGRA_FLOWCTRL) += flowctrl.o
+obj-$(CONFIG_SOC_TEGRA_PMC) += pmc.o
+obj-$(CONFIG_SOC_TEGRA_PMC_TEGRA186) += pmc-tegra186.o

arch/arm/mach-tegra/flowctrl.c → drivers/soc/tegra/flowctrl.c

 /*
- * arch/arm/mach-tegra/flowctrl.c
+ * drivers/soc/tegra/flowctrl.c
  *
- * functions and macros to control the flowcontroller
+ * Functions and macros to control the flowcontroller
  *
  * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved.
  *
@@ -24,11 +24,12 @@
 #include <linux/kernel.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/platform_device.h>
 
+#include <soc/tegra/common.h>
+#include <soc/tegra/flowctrl.h>
 #include <soc/tegra/fuse.h>
 
-#include "flowctrl.h"
-
 static u8 flowctrl_offset_halt_cpu[] = {
 	FLOW_CTRL_HALT_CPU0_EVENTS,
 	FLOW_CTRL_HALT_CPU1_EVENTS,
@@ -47,6 +48,10 @@ static void __iomem *tegra_flowctrl_base;
 
 static void flowctrl_update(u8 offset, u32 value)
 {
+	if (WARN_ONCE(IS_ERR_OR_NULL(tegra_flowctrl_base),
+		      "Tegra flowctrl not initialised!\n"))
+		return;
+
 	writel(value, tegra_flowctrl_base + offset);
 
 	/* ensure the update has reached the flow controller */
@@ -58,6 +63,10 @@ u32 flowctrl_read_cpu_csr(unsigned int cpuid)
 {
 	u8 offset = flowctrl_offset_cpu_csr[cpuid];
 
+	if (WARN_ONCE(IS_ERR_OR_NULL(tegra_flowctrl_base),
+		      "Tegra flowctrl not initialised!\n"))
+		return 0;
+
 	return readl(tegra_flowctrl_base + offset);
 }
 
@@ -140,7 +149,23 @@ void flowctrl_cpu_suspend_exit(unsigned int cpuid)
 	flowctrl_write_cpu_csr(cpuid, reg);
 }
 
-static const struct of_device_id matches[] __initconst = {
+static int tegra_flowctrl_probe(struct platform_device *pdev)
+{
+	void __iomem *base = tegra_flowctrl_base;
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	tegra_flowctrl_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(tegra_flowctrl_base))
+		return PTR_ERR(base);
+
+	iounmap(base);
+
+	return 0;
+}
+
+static const struct of_device_id tegra_flowctrl_match[] = {
+	{ .compatible = "nvidia,tegra210-flowctrl" },
 	{ .compatible = "nvidia,tegra124-flowctrl" },
 	{ .compatible = "nvidia,tegra114-flowctrl" },
 	{ .compatible = "nvidia,tegra30-flowctrl" },
@@ -148,24 +173,52 @@ static const struct of_device_id matches[] __initconst = {
 	{ }
 };
 
-void __init tegra_flowctrl_init(void)
+static struct platform_driver tegra_flowctrl_driver = {
+	.driver = {
+		.name = "tegra-flowctrl",
+		.suppress_bind_attrs = true,
+		.of_match_table = tegra_flowctrl_match,
+	},
+	.probe = tegra_flowctrl_probe,
+};
+builtin_platform_driver(tegra_flowctrl_driver);
+
+static int __init tegra_flowctrl_init(void)
 {
-	/* hardcoded fallback if device tree node is missing */
-	unsigned long base = 0x60007000;
-	unsigned long size = SZ_4K;
+	struct resource res;
 	struct device_node *np;
 
-	np = of_find_matching_node(NULL, matches);
-	if (np) {
-		struct resource res;
+	if (!soc_is_tegra())
+		return 0;
 
-		if (of_address_to_resource(np, 0, &res) == 0) {
-			size = resource_size(&res);
-			base = res.start;
+	np = of_find_matching_node(NULL, tegra_flowctrl_match);
+	if (np) {
+		if (of_address_to_resource(np, 0, &res) < 0) {
+			pr_err("failed to get flowctrl register\n");
+			return -ENXIO;
 		}
-
 		of_node_put(np);
+	} else if (IS_ENABLED(CONFIG_ARM)) {
+		/*
+		 * Hardcoded fallback for 32-bit Tegra
+		 * devices if device tree node is missing.
+		 */
+		res.start = 0x60007000;
+		res.end = 0x60007fff;
+		res.flags = IORESOURCE_MEM;
+	} else {
+		/*
+		 * At this point we're running on a Tegra,
+		 * that doesn't support the flow controller
+		 * (eg. Tegra186), so just return.
+		 */
+		return 0;
 	}
 
-	tegra_flowctrl_base = ioremap_nocache(base, size);
+	tegra_flowctrl_base = ioremap_nocache(res.start, resource_size(&res));
+	if (!tegra_flowctrl_base)
+		return -ENXIO;
+
+	return 0;
 }
+early_initcall(tegra_flowctrl_init);

drivers/soc/tegra/fuse/fuse-tegra.c

@@ -18,7 +18,7 @@
 #include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/kobject.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -168,7 +168,7 @@ static struct platform_driver tegra_fuse_driver = {
 	},
 	.probe = tegra_fuse_probe,
 };
-module_platform_driver(tegra_fuse_driver);
+builtin_platform_driver(tegra_fuse_driver);
 
 bool __init tegra_fuse_read_spare(unsigned int spare)
 {

drivers/soc/tegra/pmc-tegra186.c

+/*
+ * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#define pr_fmt(fmt) "tegra-pmc: " fmt
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+
+#include <asm/system_misc.h>
+
+#define PMC_CNTRL 0x000
+#define  PMC_CNTRL_MAIN_RST BIT(4)
+
+#define PMC_RST_STATUS 0x070
+
+#define WAKE_AOWAKE_CTRL 0x4f4
+#define  WAKE_AOWAKE_CTRL_INTR_POLARITY BIT(0)
+
+#define SCRATCH_SCRATCH0 0x2000
+#define  SCRATCH_SCRATCH0_MODE_RECOVERY BIT(31)
+#define  SCRATCH_SCRATCH0_MODE_BOOTLOADER BIT(30)
+#define  SCRATCH_SCRATCH0_MODE_RCM BIT(1)
+#define  SCRATCH_SCRATCH0_MODE_MASK (SCRATCH_SCRATCH0_MODE_RECOVERY | \
+				     SCRATCH_SCRATCH0_MODE_BOOTLOADER | \
+				     SCRATCH_SCRATCH0_MODE_RCM)
+
+struct tegra_pmc {
+	struct device *dev;
+	void __iomem *regs;
+	void __iomem *wake;
+	void __iomem *aotag;
+	void __iomem *scratch;
+
+	void (*system_restart)(enum reboot_mode mode, const char *cmd);
+	struct notifier_block restart;
+};
+
+static int tegra186_pmc_restart_notify(struct notifier_block *nb,
+				       unsigned long action,
+				       void *data)
+{
+	struct tegra_pmc *pmc = container_of(nb, struct tegra_pmc, restart);
+	const char *cmd = data;
+	u32 value;
+
+	value = readl(pmc->scratch + SCRATCH_SCRATCH0);
+	value &= ~SCRATCH_SCRATCH0_MODE_MASK;
+
+	if (cmd) {
+		if (strcmp(cmd, "recovery") == 0)
+			value |= SCRATCH_SCRATCH0_MODE_RECOVERY;
+
+		if (strcmp(cmd, "bootloader") == 0)
+			value |= SCRATCH_SCRATCH0_MODE_BOOTLOADER;
+
+		if (strcmp(cmd, "forced-recovery") == 0)
+			value |= SCRATCH_SCRATCH0_MODE_RCM;
+	}
+
+	writel(value, pmc->scratch + SCRATCH_SCRATCH0);
+
+	/*
+	 * If available, call the system restart implementation that was
+	 * registered earlier (typically PSCI).
+	 */
+	if (pmc->system_restart) {
+		pmc->system_restart(reboot_mode, cmd);
+		return NOTIFY_DONE;
+	}
+
+	/* reset everything but SCRATCH0_SCRATCH0 and PMC_RST_STATUS */
+	value = readl(pmc->regs + PMC_CNTRL);
+	value |= PMC_CNTRL_MAIN_RST;
+	writel(value, pmc->regs + PMC_CNTRL);
+
+	return NOTIFY_DONE;
+}
+
+static int tegra186_pmc_setup(struct tegra_pmc *pmc)
+{
+	struct device_node *np = pmc->dev->of_node;
+	bool invert;
+	u32 value;
+
+	invert = of_property_read_bool(np, "nvidia,invert-interrupt");
+
+	value = readl(pmc->wake + WAKE_AOWAKE_CTRL);
+
+	if (invert)
+		value |= WAKE_AOWAKE_CTRL_INTR_POLARITY;
+	else
+		value &= ~WAKE_AOWAKE_CTRL_INTR_POLARITY;
+
+	writel(value, pmc->wake + WAKE_AOWAKE_CTRL);
+
+	/*
+	 * We need to hook any system restart implementation registered
+	 * previously so we can write SCRATCH_SCRATCH0 before reset.
+	 */
+	pmc->system_restart = arm_pm_restart;
+	arm_pm_restart = NULL;
+
+	pmc->restart.notifier_call = tegra186_pmc_restart_notify;
+	pmc->restart.priority = 128;
+
+	return register_restart_handler(&pmc->restart);
+}
+
+static int tegra186_pmc_probe(struct platform_device *pdev)
+{
+	struct tegra_pmc *pmc;
+	struct resource *res;
+
+	pmc = devm_kzalloc(&pdev->dev, sizeof(*pmc), GFP_KERNEL);
+	if (!pmc)
+		return -ENOMEM;
+
+	pmc->dev = &pdev->dev;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pmc");
+	pmc->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pmc->regs))
+		return PTR_ERR(pmc->regs);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "wake");
+	pmc->wake = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pmc->wake))
+		return PTR_ERR(pmc->wake);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "aotag");
+	pmc->aotag = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pmc->aotag))
+		return PTR_ERR(pmc->aotag);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "scratch");
+	pmc->scratch = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pmc->scratch))
+		return PTR_ERR(pmc->scratch);
+
+	return tegra186_pmc_setup(pmc);
+}
+
+static const struct of_device_id tegra186_pmc_of_match[] = {
+	{ .compatible = "nvidia,tegra186-pmc" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, tegra186_pmc_of_match);
+
+static struct platform_driver tegra186_pmc_driver = {
+	.driver = {
+		.name = "tegra186-pmc",
+		.of_match_table = tegra186_pmc_of_match,
+	},
+	.probe = tegra186_pmc_probe,
+};
+builtin_platform_driver(tegra186_pmc_driver);

drivers/soc/ti/Kconfig

@@ -38,4 +38,16 @@ config WKUP_M3_IPC
 	  to communicate and use the Wakeup M3 for PM features like suspend
 	  resume and boots it using wkup_m3_rproc driver.
 
+config TI_SCI_PM_DOMAINS
+	tristate "TI SCI PM Domains Driver"
+	depends on TI_SCI_PROTOCOL
+	depends on PM_GENERIC_DOMAINS
+	help
+	  Generic power domain implementation for TI device implementing
+	  the TI SCI protocol.
+
+	  To compile this as a module, choose M here. The module will be
+	  called ti_sci_pm_domains. Note this is needed early in boot before
+	  rootfs may be available.
+
 endif # SOC_TI

drivers/soc/ti/Makefile

@@ -5,3 +5,4 @@ obj-$(CONFIG_KEYSTONE_NAVIGATOR_QMSS)	+= knav_qmss.o
 knav_qmss-y := knav_qmss_queue.o knav_qmss_acc.o
 obj-$(CONFIG_KEYSTONE_NAVIGATOR_DMA)	+= knav_dma.o
 obj-$(CONFIG_WKUP_M3_IPC)		+= wkup_m3_ipc.o
+obj-$(CONFIG_TI_SCI_PM_DOMAINS)		+= ti_sci_pm_domains.o

drivers/soc/ti/ti_sci_pm_domains.c

+/*
+ * TI SCI Generic Power Domain Driver
+ *
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ *	J Keerthy <j-keerthy@ti.com>
+ *	Dave Gerlach <d-gerlach@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/slab.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+
+/**
+ * struct ti_sci_genpd_dev_data: holds data needed for every device attached
+ *				 to this genpd
+ * @idx: index of the device that identifies it with the system
+ *	 control processor.
+ */
+struct ti_sci_genpd_dev_data {
+	int idx;
+};
+
+/**
+ * struct ti_sci_pm_domain: TI specific data needed for power domain
+ * @ti_sci: handle to TI SCI protocol driver that provides ops to
+ *	    communicate with system control processor.
+ * @dev: pointer to dev for the driver for devm allocs
+ * @pd: generic_pm_domain for use with the genpd framework
+ */
+struct ti_sci_pm_domain {
+	const struct ti_sci_handle *ti_sci;
+	struct device *dev;
+	struct generic_pm_domain pd;
+};
+
+#define genpd_to_ti_sci_pd(gpd) container_of(gpd, struct ti_sci_pm_domain, pd)
+
+/**
+ * ti_sci_dev_id(): get prepopulated ti_sci id from struct dev
+ * @dev: pointer to device associated with this genpd
+ *
+ * Returns device_id stored from ti,sci_id property
+ */
+static int ti_sci_dev_id(struct device *dev)
+{
+	struct generic_pm_domain_data *genpd_data = dev_gpd_data(dev);
+	struct ti_sci_genpd_dev_data *sci_dev_data = genpd_data->data;
+
+	return sci_dev_data->idx;
+}
+
+/**
+ * ti_sci_dev_to_sci_handle(): get pointer to ti_sci_handle
+ * @dev: pointer to device associated with this genpd
+ *
+ * Returns ti_sci_handle to be used to communicate with system
+ *	   control processor.
+ */
+static const struct ti_sci_handle *ti_sci_dev_to_sci_handle(struct device *dev)
+{
+	struct generic_pm_domain *pd = pd_to_genpd(dev->pm_domain);
+	struct ti_sci_pm_domain *ti_sci_genpd = genpd_to_ti_sci_pd(pd);
+
+	return ti_sci_genpd->ti_sci;
+}
+
+/**
+ * ti_sci_dev_start(): genpd device start hook called to turn device on
+ * @dev: pointer to device associated with this genpd to be powered on
+ */
+static int ti_sci_dev_start(struct device *dev)
+{
+	const struct ti_sci_handle *ti_sci = ti_sci_dev_to_sci_handle(dev);
+	int idx = ti_sci_dev_id(dev);
+
+	return ti_sci->ops.dev_ops.get_device(ti_sci, idx);
+}
+
+/**
+ * ti_sci_dev_stop(): genpd device stop hook called to turn device off
+ * @dev: pointer to device associated with this genpd to be powered off
+ */
+static int ti_sci_dev_stop(struct device *dev)
+{
+	const struct ti_sci_handle *ti_sci = ti_sci_dev_to_sci_handle(dev);
+	int idx = ti_sci_dev_id(dev);
+
+	return ti_sci->ops.dev_ops.put_device(ti_sci, idx);
+}
+
+static int ti_sci_pd_attach_dev(struct generic_pm_domain *domain,
+				struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct of_phandle_args pd_args;
+	struct ti_sci_pm_domain *ti_sci_genpd = genpd_to_ti_sci_pd(domain);
+	const struct ti_sci_handle *ti_sci = ti_sci_genpd->ti_sci;
+	struct ti_sci_genpd_dev_data *sci_dev_data;
+	struct generic_pm_domain_data *genpd_data;
+	int idx, ret = 0;
+
+	ret = of_parse_phandle_with_args(np, "power-domains",
+					 "#power-domain-cells", 0, &pd_args);
+	if (ret < 0)
+		return ret;
+
+	if (pd_args.args_count != 1)
+		return -EINVAL;
+
+	idx = pd_args.args[0];
+
+	/*
+	 * Check the validity of the requested idx, if the index is not valid
+	 * the PMMC will return a NAK here and we will not allocate it.
+	 */
+	ret = ti_sci->ops.dev_ops.is_valid(ti_sci, idx);
+	if (ret)
+		return -EINVAL;
+
+	sci_dev_data = kzalloc(sizeof(*sci_dev_data), GFP_KERNEL);
+	if (!sci_dev_data)
+		return -ENOMEM;
+
+	sci_dev_data->idx = idx;
+
+	genpd_data = dev_gpd_data(dev);
+	genpd_data->data = sci_dev_data;
+
+	return 0;
+}
+
+static void ti_sci_pd_detach_dev(struct generic_pm_domain *domain,
+				 struct device *dev)
+{
+	struct generic_pm_domain_data *genpd_data = dev_gpd_data(dev);
+	struct ti_sci_genpd_dev_data *sci_dev_data = genpd_data->data;
+
+	kfree(sci_dev_data);
+	genpd_data->data = NULL;
+}
+
+static const struct of_device_id ti_sci_pm_domain_matches[] = {
+	{ .compatible = "ti,sci-pm-domain", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ti_sci_pm_domain_matches);
+
+static int ti_sci_pm_domain_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct ti_sci_pm_domain *ti_sci_pd;
+	int ret;
+
+	ti_sci_pd = devm_kzalloc(dev, sizeof(*ti_sci_pd), GFP_KERNEL);
+	if (!ti_sci_pd)
+		return -ENOMEM;
+
+	ti_sci_pd->ti_sci = devm_ti_sci_get_handle(dev);
+	if (IS_ERR(ti_sci_pd->ti_sci))
+		return PTR_ERR(ti_sci_pd->ti_sci);
+
+	ti_sci_pd->dev = dev;
+
+	ti_sci_pd->pd.attach_dev = ti_sci_pd_attach_dev;
+	ti_sci_pd->pd.detach_dev = ti_sci_pd_detach_dev;
+
+	ti_sci_pd->pd.dev_ops.start = ti_sci_dev_start;
+	ti_sci_pd->pd.dev_ops.stop = ti_sci_dev_stop;
+
+	pm_genpd_init(&ti_sci_pd->pd, NULL, true);
+
+	ret = of_genpd_add_provider_simple(np, &ti_sci_pd->pd);
+
+	return ret;
+}
+
+static struct platform_driver ti_sci_pm_domains_driver = {
+	.probe = ti_sci_pm_domain_probe,
+	.driver = {
+		.name = "ti_sci_pm_domains",
+		.of_match_table = ti_sci_pm_domain_matches,
+	},
+};
+module_platform_driver(ti_sci_pm_domains_driver);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TI System Control Interface (SCI) Power Domain driver");
+MODULE_AUTHOR("Dave Gerlach");

drivers/soc/zte/zx296718_pm_domains.c

@@ -169,7 +169,6 @@ static const struct of_device_id zx296718_pm_domain_matches[] = {
 static struct platform_driver zx296718_pd_driver = {
 	.driver = {
 		.name = "zx296718-powerdomain",
-		.owner = THIS_MODULE,
 		.of_match_table = zx296718_pm_domain_matches,
 	},
 	.probe = zx296718_pd_probe,

drivers/soc/zte/zx2967_pm_domains.c

@@ -125,10 +125,8 @@ int zx2967_pd_probe(struct platform_device *pdev,
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	pcubase = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(pcubase)) {
-		dev_err(&pdev->dev, "ioremap fail.\n");
+	if (IS_ERR(pcubase))
 		return PTR_ERR(pcubase);
-	}
 
 	for (i = 0; i < domain_num; ++i) {
 		zx_pm_domains[i]->power_on = zx2967_power_on;

include/dt-bindings/genpd/k2g.h

+/*
+ * TI K2G SoC Device definitions
+ *
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_GENPD_K2G_H
+#define _DT_BINDINGS_GENPD_K2G_H
+
+/* Documented in http://processors.wiki.ti.com/index.php/TISCI */
+
+#define K2G_DEV_PMMC0			0x0000
+#define K2G_DEV_MLB0			0x0001
+#define K2G_DEV_DSS0			0x0002
+#define K2G_DEV_MCBSP0			0x0003
+#define K2G_DEV_MCASP0			0x0004
+#define K2G_DEV_MCASP1			0x0005
+#define K2G_DEV_MCASP2			0x0006
+#define K2G_DEV_DCAN0			0x0008
+#define K2G_DEV_DCAN1			0x0009
+#define K2G_DEV_EMIF0			0x000a
+#define K2G_DEV_MMCHS0			0x000b
+#define K2G_DEV_MMCHS1			0x000c
+#define K2G_DEV_GPMC0			0x000d
+#define K2G_DEV_ELM0			0x000e
+#define K2G_DEV_SPI0			0x0010
+#define K2G_DEV_SPI1			0x0011
+#define K2G_DEV_SPI2			0x0012
+#define K2G_DEV_SPI3			0x0013
+#define K2G_DEV_ICSS0			0x0014
+#define K2G_DEV_ICSS1			0x0015
+#define K2G_DEV_USB0			0x0016
+#define K2G_DEV_USB1			0x0017
+#define K2G_DEV_NSS0			0x0018
+#define K2G_DEV_PCIE0			0x0019
+#define K2G_DEV_GPIO0			0x001b
+#define K2G_DEV_GPIO1			0x001c
+#define K2G_DEV_TIMER64_0		0x001d
+#define K2G_DEV_TIMER64_1		0x001e
+#define K2G_DEV_TIMER64_2		0x001f
+#define K2G_DEV_TIMER64_3		0x0020
+#define K2G_DEV_TIMER64_4		0x0021
+#define K2G_DEV_TIMER64_5		0x0022
+#define K2G_DEV_TIMER64_6		0x0023
+#define K2G_DEV_MSGMGR0			0x0025
+#define K2G_DEV_BOOTCFG0		0x0026
+#define K2G_DEV_ARM_BOOTROM0		0x0027
+#define K2G_DEV_DSP_BOOTROM0		0x0029
+#define K2G_DEV_DEBUGSS0		0x002b
+#define K2G_DEV_UART0			0x002c
+#define K2G_DEV_UART1			0x002d
+#define K2G_DEV_UART2			0x002e
+#define K2G_DEV_EHRPWM0			0x002f
+#define K2G_DEV_EHRPWM1			0x0030
+#define K2G_DEV_EHRPWM2			0x0031
+#define K2G_DEV_EHRPWM3			0x0032
+#define K2G_DEV_EHRPWM4			0x0033
+#define K2G_DEV_EHRPWM5			0x0034
+#define K2G_DEV_EQEP0			0x0035
+#define K2G_DEV_EQEP1			0x0036
+#define K2G_DEV_EQEP2			0x0037
+#define K2G_DEV_ECAP0			0x0038
+#define K2G_DEV_ECAP1			0x0039
+#define K2G_DEV_I2C0			0x003a
+#define K2G_DEV_I2C1			0x003b
+#define K2G_DEV_I2C2			0x003c
+#define K2G_DEV_EDMA0			0x003f
+#define K2G_DEV_SEMAPHORE0		0x0040
+#define K2G_DEV_INTC0			0x0041
+#define K2G_DEV_GIC0			0x0042
+#define K2G_DEV_QSPI0			0x0043
+#define K2G_DEV_ARM_64B_COUNTER0	0x0044
+#define K2G_DEV_TETRIS0			0x0045
+#define K2G_DEV_CGEM0			0x0046
+#define K2G_DEV_MSMC0			0x0047
+#define K2G_DEV_CBASS0			0x0049
+#define K2G_DEV_BOARD0			0x004c
+#define K2G_DEV_EDMA1			0x004f
+
+#endif

include/dt-bindings/power/imx7-power.h

+/*
+ *  Copyright (C) 2017 Impinj
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DT_BINDINGS_IMX7_POWER_H__
+#define __DT_BINDINGS_IMX7_POWER_H__
+
+#define IMX7_POWER_DOMAIN_MIPI_PHY		0
+#define IMX7_POWER_DOMAIN_PCIE_PHY		1
+#define IMX7_POWER_DOMAIN_USB_HSIC_PHY		2
+
+#endif

include/dt-bindings/power/r8a7795-sysc.h

@@ -33,7 +33,7 @@
 #define R8A7795_PD_CA53_SCU		21
 #define R8A7795_PD_3DG_E		22
 #define R8A7795_PD_A3IR			24
-#define R8A7795_PD_A2VC0		25
+#define R8A7795_PD_A2VC0		25	/* ES1.x only */
 #define R8A7795_PD_A2VC1		26
 
 /* Always-on power area */

include/dt-bindings/reset/altr,rst-mgr-a10sr.h

+/*
+ *  Copyright Intel Corporation (C) 2017. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Reset binding definitions for Altera Arria10 MAX5 System Resource Chip
+ *
+ * Adapted from altr,rst-mgr-a10.h
+ */
+
+#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_A10SR_H
+#define _DT_BINDINGS_RESET_ALTR_RST_MGR_A10SR_H
+
+/* Peripheral PHY resets */
+#define A10SR_RESET_ENET_HPS	0
+#define A10SR_RESET_PCIE	1
+#define A10SR_RESET_FILE	2
+#define A10SR_RESET_BQSPI	3
+#define A10SR_RESET_USB		4
+
+#define A10SR_RESET_NUM		5
+
+#endif

include/dt-bindings/reset/imx7-reset.h

+/*
+ * Copyright (C) 2017 Impinj, Inc.
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef DT_BINDING_RESET_IMX7_H
+#define DT_BINDING_RESET_IMX7_H
+
+#define IMX7_RESET_A7_CORE_POR_RESET0	0
+#define IMX7_RESET_A7_CORE_POR_RESET1	1
+#define IMX7_RESET_A7_CORE_RESET0	2
+#define IMX7_RESET_A7_CORE_RESET1	3
+#define IMX7_RESET_A7_DBG_RESET0	4
+#define IMX7_RESET_A7_DBG_RESET1	5
+#define IMX7_RESET_A7_ETM_RESET0	6
+#define IMX7_RESET_A7_ETM_RESET1	7
+#define IMX7_RESET_A7_SOC_DBG_RESET	8
+#define IMX7_RESET_A7_L2RESET		9
+#define IMX7_RESET_SW_M4C_RST		10
+#define IMX7_RESET_SW_M4P_RST		11
+#define IMX7_RESET_EIM_RST		12
+#define IMX7_RESET_HSICPHY_PORT_RST	13
+#define IMX7_RESET_USBPHY1_POR		14
+#define IMX7_RESET_USBPHY1_PORT_RST	15
+#define IMX7_RESET_USBPHY2_POR		16
+#define IMX7_RESET_USBPHY2_PORT_RST	17
+#define IMX7_RESET_MIPI_PHY_MRST	18
+#define IMX7_RESET_MIPI_PHY_SRST	19
+
+/*
+ * IMX7_RESET_PCIEPHY is a logical reset line combining PCIEPHY_BTN
+ * and PCIEPHY_G_RST
+ */
+#define IMX7_RESET_PCIEPHY		20
+#define IMX7_RESET_PCIEPHY_PERST	21
+
+/*
+ * IMX7_RESET_PCIE_CTRL_APPS_EN is not strictly a reset line, but it
+ * can be used to inhibit PCIe LTTSM, so, in a way, it can be thoguht
+ * of as one
+ */
+#define IMX7_RESET_PCIE_CTRL_APPS_EN	22
+#define IMX7_RESET_DDRC_PRST		23
+#define IMX7_RESET_DDRC_CORE_RST	24
+
+#define IMX7_RESET_NUM			25
+
+#endif
+

include/linux/firmware/meson/meson_sm.h

@@ -25,7 +25,7 @@ int meson_sm_call(unsigned int cmd_index, u32 *ret, u32 arg0, u32 arg1,
 		  u32 arg2, u32 arg3, u32 arg4);
 int meson_sm_call_write(void *buffer, unsigned int b_size, unsigned int cmd_index,
 			u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4);
-int meson_sm_call_read(void *buffer, unsigned int cmd_index, u32 arg0, u32 arg1,
-		       u32 arg2, u32 arg3, u32 arg4);
+int meson_sm_call_read(void *buffer, unsigned int bsize, unsigned int cmd_index,
+		       u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4);
 
 #endif /* _MESON_SM_FW_H_ */

include/linux/pm_domain.h

@@ -118,6 +118,7 @@ struct generic_pm_domain_data {
 	struct pm_domain_data base;
 	struct gpd_timing_data td;
 	struct notifier_block nb;
+	void *data;
 };
 
 #ifdef CONFIG_PM_GENERIC_DOMAINS

include/linux/qcom_scm.h

@@ -40,6 +40,9 @@ extern int qcom_scm_pas_shutdown(u32 peripheral);
 extern void qcom_scm_cpu_power_down(u32 flags);
 extern u32 qcom_scm_get_version(void);
 extern int qcom_scm_set_remote_state(u32 state, u32 id);
+extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
+extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
+extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
 #else
 static inline
 int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
@@ -67,5 +70,8 @@ static inline void qcom_scm_cpu_power_down(u32 flags) {}
 static inline u32 qcom_scm_get_version(void) { return 0; }
 static inline u32
 qcom_scm_set_remote_state(u32 state,u32 id) { return -ENODEV; }
+static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) { return -ENODEV; }
+static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) { return -ENODEV; }
+static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) { return -ENODEV; }
 #endif
 #endif

arch/arm/mach-tegra/flowctrl.h → include/soc/tegra/flowctrl.h

 /*
- * arch/arm/mach-tegra/flowctrl.h
- *
- * functions and macros to control the flowcontroller
+ * Functions and macros to control the flowcontroller
  *
  * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved.
  *
@@ -18,8 +16,8 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef __MACH_TEGRA_FLOWCTRL_H
-#define __MACH_TEGRA_FLOWCTRL_H
+#ifndef __SOC_TEGRA_FLOWCTRL_H__
+#define __SOC_TEGRA_FLOWCTRL_H__
 
 #define FLOW_CTRL_HALT_CPU0_EVENTS	0x0
 #define FLOW_CTRL_WAITEVENT		(2 << 29)
@@ -53,14 +51,32 @@
 #define TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP	(0xF << 8)
 
 #ifndef __ASSEMBLY__
+#ifdef CONFIG_SOC_TEGRA_FLOWCTRL
 u32 flowctrl_read_cpu_csr(unsigned int cpuid);
 void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value);
 void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value);
 
 void flowctrl_cpu_suspend_enter(unsigned int cpuid);
 void flowctrl_cpu_suspend_exit(unsigned int cpuid);
+#else
+static inline u32 flowctrl_read_cpu_csr(unsigned int cpuid)
+{
+	return 0;
+}
+
+static inline void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value)
+{
+}
+
+static inline void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value) {}
 
-void tegra_flowctrl_init(void);
-#endif
+static inline void flowctrl_cpu_suspend_enter(unsigned int cpuid)
+{
+}
 
-#endif
+static inline void flowctrl_cpu_suspend_exit(unsigned int cpuid)
+{
+}
+#endif /* CONFIG_SOC_TEGRA_FLOWCTRL */
+#endif /* __ASSEMBLY */
+#endif /* __SOC_TEGRA_FLOWCTRL_H__ */

include/soc/tegra/pmc.h

@@ -26,12 +26,6 @@
 struct clk;
 struct reset_control;
 
-#ifdef CONFIG_PM_SLEEP
-enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void);
-void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode);
-void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode);
-#endif /* CONFIG_PM_SLEEP */
-
 #ifdef CONFIG_SMP
 bool tegra_pmc_cpu_is_powered(unsigned int cpuid);
 int tegra_pmc_cpu_power_on(unsigned int cpuid);
@@ -144,7 +138,7 @@ enum tegra_io_pad_voltage {
 	TEGRA_IO_PAD_3300000UV,
 };
 
-#ifdef CONFIG_ARCH_TEGRA
+#ifdef CONFIG_SOC_TEGRA_PMC
 int tegra_powergate_is_powered(unsigned int id);
 int tegra_powergate_power_on(unsigned int id);
 int tegra_powergate_power_off(unsigned int id);
@@ -163,6 +157,11 @@ int tegra_io_pad_get_voltage(enum tegra_io_pad id);
 /* deprecated, use tegra_io_pad_power_{enable,disable}() instead */
 int tegra_io_rail_power_on(unsigned int id);
 int tegra_io_rail_power_off(unsigned int id);
+
+enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void);
+void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode);
+void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode);
+
 #else
 static inline int tegra_powergate_is_powered(unsigned int id)
 {
@@ -221,6 +220,20 @@ static inline int tegra_io_rail_power_off(unsigned int id)
 {
 	return -ENOSYS;
 }
-#endif /* CONFIG_ARCH_TEGRA */
+
+static inline enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void)
+{
+	return TEGRA_SUSPEND_NONE;
+}
+
+static inline void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode)
+{
+}
+
+static inline void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode)
+{
+}
+
+#endif /* CONFIG_SOC_TEGRA_PMC */
 
 #endif /* __SOC_TEGRA_PMC_H__ */