iwlwifi: move status definitions from iwl-shared

The code has been changed, move the definitions to the proper file
being used by the code.
Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

drivers/net/wireless/iwlwifi/iwl-agn.h

@@ -82,6 +82,24 @@ extern struct iwl_lib_ops iwl6030_lib;
 
 
 
+/*****************************************************
+* DRIVER STATUS FUNCTIONS
+******************************************************/
+#define STATUS_RF_KILL_HW	0
+#define STATUS_CT_KILL		1
+#define STATUS_ALIVE		2
+#define STATUS_READY		3
+#define STATUS_GEO_CONFIGURED	4
+#define STATUS_EXIT_PENDING	5
+#define STATUS_STATISTICS	6
+#define STATUS_SCANNING		7
+#define STATUS_SCAN_ABORTING	8
+#define STATUS_SCAN_HW		9
+#define STATUS_FW_ERROR		10
+#define STATUS_CHANNEL_SWITCH_PENDING 11
+#define STATUS_SCAN_COMPLETE	12
+#define STATUS_POWER_PMI	13
+
 struct iwl_ucode_capabilities;
 
 extern struct ieee80211_ops iwlagn_hw_ops;

drivers/net/wireless/iwlwifi/iwl-shared.h

@@ -185,28 +185,4 @@ const char *get_cmd_string(u8 cmd);
 
 #define IWL_CMD(x) case x: return #x
 
-/*****************************************************
-* DRIVER STATUS FUNCTIONS
-******************************************************/
-#define STATUS_HCMD_ACTIVE	0	/* host command in progress */
-/* 1 is unused (used to be STATUS_HCMD_SYNC_ACTIVE) */
-#define STATUS_INT_ENABLED	2
-#define STATUS_RF_KILL_HW	3
-#define STATUS_CT_KILL		4
-#define STATUS_INIT		5
-#define STATUS_ALIVE		6
-#define STATUS_READY		7
-#define STATUS_TEMPERATURE	8
-#define STATUS_GEO_CONFIGURED	9
-#define STATUS_EXIT_PENDING	10
-#define STATUS_STATISTICS	12
-#define STATUS_SCANNING		13
-#define STATUS_SCAN_ABORTING	14
-#define STATUS_SCAN_HW		15
-#define STATUS_POWER_PMI	16
-#define STATUS_FW_ERROR		17
-#define STATUS_DEVICE_ENABLED	18
-#define STATUS_CHANNEL_SWITCH_PENDING 19
-#define STATUS_SCAN_COMPLETE	20
-
 #endif /* #__iwl_shared_h__ */

drivers/net/wireless/iwlwifi/iwl-trans-pcie-int.h

@@ -278,6 +278,14 @@ struct iwl_trans_pcie {
 	unsigned long wd_timeout;
 };
 
+/*****************************************************
+* DRIVER STATUS FUNCTIONS
+******************************************************/
+#define STATUS_HCMD_ACTIVE	0
+#define STATUS_DEVICE_ENABLED	1
+#define STATUS_TPOWER_PMI	2
+#define STATUS_INT_ENABLED	3
+
 #define IWL_TRANS_GET_PCIE_TRANS(_iwl_trans) \
 	((struct iwl_trans_pcie *) ((_iwl_trans)->trans_specific))
 

drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c

@@ -150,7 +150,7 @@ void iwl_rx_queue_update_write_ptr(struct iwl_trans *trans,
 			IWL_TRANS_GET_PCIE_TRANS(trans);
 
 		/* If power-saving is in use, make sure device is awake */
-		if (test_bit(STATUS_POWER_PMI, &trans_pcie->status)) {
+		if (test_bit(STATUS_TPOWER_PMI, &trans_pcie->status)) {
 			reg = iwl_read32(trans, CSR_UCODE_DRV_GP1);
 
 			if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {

drivers/net/wireless/iwlwifi/iwl-trans-pcie-tx.c

@@ -107,7 +107,7 @@ void iwl_txq_update_write_ptr(struct iwl_trans *trans, struct iwl_tx_queue *txq)
 		struct iwl_trans_pcie *trans_pcie =
 			IWL_TRANS_GET_PCIE_TRANS(trans);
 		/* if we're trying to save power */
-		if (test_bit(STATUS_POWER_PMI, &trans_pcie->status)) {
+		if (test_bit(STATUS_TPOWER_PMI, &trans_pcie->status)) {
 			/* wake up nic if it's powered down ...
 			 * uCode will wake up, and interrupt us again, so next
 			 * time we'll skip this part. */

drivers/net/wireless/iwlwifi/iwl-trans-pcie.c

@@ -1253,7 +1253,7 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
 	clear_bit(STATUS_HCMD_ACTIVE, &trans_pcie->status);
 	clear_bit(STATUS_INT_ENABLED, &trans_pcie->status);
 	clear_bit(STATUS_DEVICE_ENABLED, &trans_pcie->status);
-	clear_bit(STATUS_POWER_PMI, &trans_pcie->status);
+	clear_bit(STATUS_TPOWER_PMI, &trans_pcie->status);
 }
 
 static void iwl_trans_pcie_wowlan_suspend(struct iwl_trans *trans)
@@ -1574,9 +1574,9 @@ static void iwl_trans_pcie_set_pmi(struct iwl_trans *trans, bool state)
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 
 	if (state)
-		set_bit(STATUS_POWER_PMI, &trans_pcie->status);
+		set_bit(STATUS_TPOWER_PMI, &trans_pcie->status);
 	else
-		clear_bit(STATUS_POWER_PMI, &trans_pcie->status);
+		clear_bit(STATUS_TPOWER_PMI, &trans_pcie->status);
 }
 
 #ifdef CONFIG_PM_SLEEP