Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

Pull m68knommu updates from Greg Ungerer:
 "There are two sets of changes in this pull.

  The largest is the addition of the ColdFire platform side i2c support
  (the IO addressing, setup and clock definitions). The i2c hardware
  module itself is driven by the kernels existing iMX i2c driver.

  The other change is the addition of support for the Amcore board"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: AMCORE board, add iMX i2c support
  m68k: add Sysam AMCORE open board support
  m68knommu: platform support for i2c devices on ColdFire SoC

arch/m68k/Kconfig.machine

@@ -259,6 +259,12 @@ config M5407C3
 	help
 	  Support for the Motorola M5407C3 board.
 
+config AMCORE
+	bool "Sysam AMCORE board support"
+	depends on M5307
+	help
+	  Support for the Sysam AMCORE open-hardware generic board.
+
 config FIREBEE
 	bool "FireBee board support"
 	depends on M547x

arch/m68k/coldfire/Makefile

@@ -34,6 +34,7 @@ obj-$(CONFIG_NETtel)	+= nettel.o
 obj-$(CONFIG_CLEOPATRA)	+= nettel.o
 obj-$(CONFIG_FIREBEE)	+= firebee.o
 obj-$(CONFIG_MCF8390)	+= mcf8390.o
+obj-$(CONFIG_AMCORE)    += amcore.o
 
 obj-$(CONFIG_PCI)	+= pci.o
 

arch/m68k/coldfire/amcore.c

+/*
+ * amcore.c -- Support for Sysam AMCORE open board
+ *
+ * (C) Copyright 2016, Angelo Dureghello <angelo@sysam.it>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/dm9000.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/io.h>
+
+#if IS_ENABLED(CONFIG_DM9000)
+
+#define DM9000_IRQ	25
+#define DM9000_ADDR	0x30000000
+
+/*
+ * DEVICES and related device RESOURCES
+ */
+static struct resource dm9000_resources[] = {
+	/* physical address of the address register (CMD [A2] to 0)*/
+	[0] = {
+		.start  = DM9000_ADDR,
+		.end    = DM9000_ADDR,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 * physical address of the data register (CMD [A2] to 1),
+	 * driver wants a range >=4 to assume a 32bit data bus
+	 */
+	[1] = {
+		.start  = DM9000_ADDR + 4,
+		.end    = DM9000_ADDR + 7,
+		.flags  = IORESOURCE_MEM,
+	},
+	/* IRQ line the device's interrupt pin is connected to */
+	[2] = {
+		.start  = DM9000_IRQ,
+		.end    = DM9000_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct dm9000_plat_data dm9000_platdata = {
+	.flags		= DM9000_PLATF_32BITONLY,
+};
+
+static struct platform_device dm9000_device = {
+	.name           = "dm9000",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(dm9000_resources),
+	.resource       = dm9000_resources,
+	.dev = {
+		.platform_data = &dm9000_platdata,
+	}
+};
+#endif
+
+static void __init dm9000_pre_init(void)
+{
+	/* Set the dm9000 interrupt to be auto-vectored */
+	mcf_autovector(DM9000_IRQ);
+}
+
+/*
+ * Partitioning of parallel NOR flash (39VF3201B)
+ */
+static struct mtd_partition amcore_partitions[] = {
+	{
+		.name	= "U-Boot (128K)",
+		.size	= 0x20000,
+		.offset	= 0x0
+	},
+	{
+		.name	= "Kernel+ROMfs (2994K)",
+		.size	= 0x2E0000,
+		.offset	= MTDPART_OFS_APPEND
+	},
+	{
+		.name	= "Flash Free Space (1024K)",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= MTDPART_OFS_APPEND
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.parts		= amcore_partitions,
+	.nr_parts	= ARRAY_SIZE(amcore_partitions),
+	.width		= 2,
+};
+
+static struct resource flash_resource = {
+	.start		= 0xffc00000,
+	.end		= 0xffffffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data	= &flash_data,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name	= "rtc-ds1307",
+	.id	= -1,
+};
+
+static struct i2c_board_info amcore_i2c_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("ds1338", 0x68),
+	},
+};
+
+static struct platform_device *amcore_devices[] __initdata = {
+#if IS_ENABLED(CONFIG_DM9000)
+	&dm9000_device,
+#endif
+	&flash_device,
+	&rtc_device,
+};
+
+static int __init init_amcore(void)
+{
+#if IS_ENABLED(CONFIG_DM9000)
+	dm9000_pre_init();
+#endif
+
+	/* Add i2c RTC Dallas chip supprt */
+	i2c_register_board_info(0, amcore_i2c_info,
+				ARRAY_SIZE(amcore_i2c_info));
+
+	platform_add_devices(amcore_devices, ARRAY_SIZE(amcore_devices));
+
+	return 0;
+}
+
+arch_initcall(init_amcore);

arch/m68k/coldfire/device.c

@@ -327,6 +327,147 @@ static struct platform_device mcf_qspi = {
 };
 #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
+#if IS_ENABLED(CONFIG_I2C_IMX)
+static struct resource mcf_i2c0_resources[] = {
+	{
+		.start          = MCFI2C_BASE0,
+		.end            = MCFI2C_BASE0 + MCFI2C_SIZE0 - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = MCF_IRQ_I2C0,
+		.end            = MCF_IRQ_I2C0,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mcf_i2c0 = {
+	.name                   = "imx1-i2c",
+	.id                     = 0,
+	.num_resources          = ARRAY_SIZE(mcf_i2c0_resources),
+	.resource               = mcf_i2c0_resources,
+};
+#ifdef MCFI2C_BASE1
+
+static struct resource mcf_i2c1_resources[] = {
+	{
+		.start          = MCFI2C_BASE1,
+		.end            = MCFI2C_BASE1 + MCFI2C_SIZE1 - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = MCF_IRQ_I2C1,
+		.end            = MCF_IRQ_I2C1,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mcf_i2c1 = {
+	.name                   = "imx1-i2c",
+	.id                     = 1,
+	.num_resources          = ARRAY_SIZE(mcf_i2c1_resources),
+	.resource               = mcf_i2c1_resources,
+};
+
+#endif /* MCFI2C_BASE1 */
+
+#ifdef MCFI2C_BASE2
+
+static struct resource mcf_i2c2_resources[] = {
+	{
+		.start          = MCFI2C_BASE2,
+		.end            = MCFI2C_BASE2 + MCFI2C_SIZE2 - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = MCF_IRQ_I2C2,
+		.end            = MCF_IRQ_I2C2,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mcf_i2c2 = {
+	.name                   = "imx1-i2c",
+	.id                     = 2,
+	.num_resources          = ARRAY_SIZE(mcf_i2c2_resources),
+	.resource               = mcf_i2c2_resources,
+};
+
+#endif /* MCFI2C_BASE2 */
+
+#ifdef MCFI2C_BASE3
+
+static struct resource mcf_i2c3_resources[] = {
+	{
+		.start          = MCFI2C_BASE3,
+		.end            = MCFI2C_BASE3 + MCFI2C_SIZE3 - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = MCF_IRQ_I2C3,
+		.end            = MCF_IRQ_I2C3,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mcf_i2c3 = {
+	.name                   = "imx1-i2c",
+	.id                     = 3,
+	.num_resources          = ARRAY_SIZE(mcf_i2c3_resources),
+	.resource               = mcf_i2c3_resources,
+};
+
+#endif /* MCFI2C_BASE3 */
+
+#ifdef MCFI2C_BASE4
+
+static struct resource mcf_i2c4_resources[] = {
+	{
+		.start          = MCFI2C_BASE4,
+		.end            = MCFI2C_BASE4 + MCFI2C_SIZE4 - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = MCF_IRQ_I2C4,
+		.end            = MCF_IRQ_I2C4,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mcf_i2c4 = {
+	.name                   = "imx1-i2c",
+	.id                     = 4,
+	.num_resources          = ARRAY_SIZE(mcf_i2c4_resources),
+	.resource               = mcf_i2c4_resources,
+};
+
+#endif /* MCFI2C_BASE4 */
+
+#ifdef MCFI2C_BASE5
+
+static struct resource mcf_i2c5_resources[] = {
+	{
+		.start          = MCFI2C_BASE5,
+		.end            = MCFI2C_BASE5 + MCFI2C_SIZE5 - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = MCF_IRQ_I2C5,
+		.end            = MCF_IRQ_I2C5,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mcf_i2c5 = {
+	.name                   = "imx1-i2c",
+	.id                     = 5,
+	.num_resources          = ARRAY_SIZE(mcf_i2c5_resources),
+	.resource               = mcf_i2c5_resources,
+};
+
+#endif /* MCFI2C_BASE5 */
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+
 static struct platform_device *mcf_devices[] __initdata = {
 	&mcf_uart,
 #if IS_ENABLED(CONFIG_FEC)
@@ -338,6 +479,24 @@ static struct platform_device *mcf_devices[] __initdata = {
 #if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	&mcf_qspi,
 #endif
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	&mcf_i2c0,
+#ifdef MCFI2C_BASE1
+	&mcf_i2c1,
+#endif
+#ifdef MCFI2C_BASE2
+	&mcf_i2c2,
+#endif
+#ifdef MCFI2C_BASE3
+	&mcf_i2c3,
+#endif
+#ifdef MCFI2C_BASE4
+	&mcf_i2c4,
+#endif
+#ifdef MCFI2C_BASE5
+	&mcf_i2c5,
+#endif
+#endif
 };
 
 /*

arch/m68k/coldfire/m5206.c

@@ -26,6 +26,7 @@ DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
 DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
 DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
 DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
 
 struct clk *mcf_clks[] = {
 	&clk_pll,
@@ -34,11 +35,21 @@ struct clk *mcf_clks[] = {
 	&clk_mcftmr1,
 	&clk_mcfuart0,
 	&clk_mcfuart1,
+	&clk_mcfi2c0,
 	NULL
 };
 
 /***************************************************************************/
 
+static void __init m5206_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
+	       MCFSIM_I2CICR);
+	mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
 void __init config_BSP(char *commandp, int size)
 {
 #if defined(CONFIG_NETtel)
@@ -53,6 +64,7 @@ void __init config_BSP(char *commandp, int size)
 	mcf_mapirq2imr(25, MCFINTC_EINT1);
 	mcf_mapirq2imr(28, MCFINTC_EINT4);
 	mcf_mapirq2imr(31, MCFINTC_EINT7);
+	m5206_i2c_init();
 }
 
 /***************************************************************************/

arch/m68k/coldfire/m520x.c

@@ -28,7 +28,7 @@ DEFINE_CLK(0, "fec.0", 12, MCF_CLK);
 DEFINE_CLK(0, "edma", 17, MCF_CLK);
 DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
 DEFINE_CLK(0, "iack.0", 21, MCF_CLK);
-DEFINE_CLK(0, "mcfi2c.0", 22, MCF_CLK);
+DEFINE_CLK(0, "imx1-i2c.0", 22, MCF_CLK);
 DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK);
 DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
 DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
@@ -53,7 +53,7 @@ struct clk *mcf_clks[] = {
 	&__clk_0_17, /* edma */
 	&__clk_0_18, /* intc.0 */
 	&__clk_0_21, /* iack.0 */
-	&__clk_0_22, /* mcfi2c.0 */
+	&__clk_0_22, /* imx1-i2c.0 */
 	&__clk_0_23, /* mcfqspi.0 */
 	&__clk_0_24, /* mcfuart.0 */
 	&__clk_0_25, /* mcfuart.1 */
@@ -71,7 +71,7 @@ struct clk *mcf_clks[] = {
 	&__clk_0_40, /* sys.0 */
 	&__clk_0_41, /* gpio.0 */
 	&__clk_0_42, /* sdram.0 */
-NULL,
+	NULL,
 };
 
 static struct clk * const enable_clks[] __initconst = {
@@ -94,7 +94,7 @@ static struct clk * const enable_clks[] __initconst = {
 static struct clk * const disable_clks[] __initconst = {
 	&__clk_0_12, /* fec.0 */
 	&__clk_0_17, /* edma */
-	&__clk_0_22, /* mcfi2c.0 */
+	&__clk_0_22, /* imx1-i2c.0 */
 	&__clk_0_23, /* mcfqspi.0 */
 	&__clk_0_28, /* mcftmr.0 */
 	&__clk_0_29, /* mcftmr.1 */
@@ -133,6 +133,21 @@ static void __init m520x_qspi_init(void)
 
 /***************************************************************************/
 
+static void __init m520x_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	u8 par;
+
+	/* setup Port FECI2C Pin Assignment Register for I2C */
+	/*  set PAR_SCL to SCL and PAR_SDA to SDA */
+	par = readb(MCF_GPIO_PAR_FECI2C);
+	par |= 0x0f;
+	writeb(par, MCF_GPIO_PAR_FECI2C);
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
+/***************************************************************************/
+
 static void __init m520x_uarts_init(void)
 {
 	u16 par;
@@ -175,6 +190,7 @@ void __init config_BSP(char *commandp, int size)
 	m520x_uarts_init();
 	m520x_fec_init();
 	m520x_qspi_init();
+	m520x_i2c_init();
 }
 
 /***************************************************************************/

arch/m68k/coldfire/m523x.c

@@ -34,6 +34,7 @@ DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
 DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK);
 DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
 DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
 
 struct clk *mcf_clks[] = {
 	&clk_pll,
@@ -47,6 +48,7 @@ struct clk *mcf_clks[] = {
 	&clk_mcfuart2,
 	&clk_mcfqspi0,
 	&clk_fec0,
+	&clk_mcfi2c0,
 	NULL
 };
 
@@ -68,6 +70,21 @@ static void __init m523x_qspi_init(void)
 
 /***************************************************************************/
 
+static void __init m523x_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	u8 par;
+
+	/* setup Port AS Pin Assignment Register for I2C */
+	/*  set PASPA0 to SCL and PASPA1 to SDA */
+	par = readb(MCFGPIO_PAR_FECI2C);
+	par |= 0x0f;
+	writeb(par, MCFGPIO_PAR_FECI2C);
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
+/***************************************************************************/
+
 static void __init m523x_fec_init(void)
 {
 	/* Set multi-function pins to ethernet use */
@@ -81,6 +98,7 @@ void __init config_BSP(char *commandp, int size)
 	mach_sched_init = hw_timer_init;
 	m523x_fec_init();
 	m523x_qspi_init();
+	m523x_i2c_init();
 }
 
 /***************************************************************************/

arch/m68k/coldfire/m5249.c

@@ -27,6 +27,8 @@ DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
 DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
 DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
 DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c1, "imx1-i2c.1", MCF_BUSCLK);
 
 struct clk *mcf_clks[] = {
 	&clk_pll,
@@ -36,6 +38,8 @@ struct clk *mcf_clks[] = {
 	&clk_mcfuart0,
 	&clk_mcfuart1,
 	&clk_mcfqspi0,
+	&clk_mcfi2c0,
+	&clk_mcfi2c1,
 	NULL
 };
 
@@ -85,6 +89,26 @@ static void __init m5249_qspi_init(void)
 
 /***************************************************************************/
 
+static void __init m5249_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	u32 r;
+
+	/* first I2C controller uses regular irq setup */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
+	       MCFSIM_I2CICR);
+	mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
+
+	/* second I2C controller is completely different */
+	r = readl(MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
+	r &= ~MCFINTC2_INTPRI_BITS(0xf, MCF_IRQ_I2C1);
+	r |= MCFINTC2_INTPRI_BITS(0x5, MCF_IRQ_I2C1);
+	writel(r, MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
+#endif /* CONFIG_I2C_IMX */
+}
+
+/***************************************************************************/
+
 #ifdef CONFIG_M5249C3
 
 static void __init m5249_smc91x_init(void)
@@ -111,6 +135,7 @@ void __init config_BSP(char *commandp, int size)
 	m5249_smc91x_init();
 #endif
 	m5249_qspi_init();
+	m5249_i2c_init();
 }
 
 /***************************************************************************/

arch/m68k/coldfire/m525x.c

@@ -27,6 +27,8 @@ DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
 DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
 DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
 DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c1, "imx1-i2c.1", MCF_BUSCLK);
 
 struct clk *mcf_clks[] = {
 	&clk_pll,
@@ -36,6 +38,8 @@ struct clk *mcf_clks[] = {
 	&clk_mcfuart0,
 	&clk_mcfuart1,
 	&clk_mcfqspi0,
+	&clk_mcfi2c0,
+	&clk_mcfi2c1,
 	NULL
 };
 
@@ -59,12 +63,12 @@ static void __init m525x_qspi_init(void)
 
 static void __init m525x_i2c_init(void)
 {
-#if IS_ENABLED(CONFIG_I2C_COLDFIRE)
+#if IS_ENABLED(CONFIG_I2C_IMX)
 	u32 r;
 
 	/* first I2C controller uses regular irq setup */
 	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
-		MCFSIM_I2CICR);
+	       MCFSIM_I2CICR);
 	mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
 
 	/* second I2C controller is completely different */
@@ -72,7 +76,7 @@ static void __init m525x_i2c_init(void)
 	r &= ~MCFINTC2_INTPRI_BITS(0xf, MCF_IRQ_I2C1);
 	r |= MCFINTC2_INTPRI_BITS(0x5, MCF_IRQ_I2C1);
 	writel(r, MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
-#endif /* IS_ENABLED(CONFIG_I2C_COLDFIRE) */
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
 }
 
 /***************************************************************************/

arch/m68k/coldfire/m527x.c

@@ -36,6 +36,7 @@ DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK);
 DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
 DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK);
 DEFINE_CLK(fec1, "fec.1", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
 
 struct clk *mcf_clks[] = {
 	&clk_pll,
@@ -50,6 +51,7 @@ struct clk *mcf_clks[] = {
 	&clk_mcfqspi0,
 	&clk_fec0,
 	&clk_fec1,
+	&clk_mcfi2c0,
 	NULL
 };
 
@@ -76,6 +78,31 @@ static void __init m527x_qspi_init(void)
 
 /***************************************************************************/
 
+static void __init m527x_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+#if defined(CONFIG_M5271)
+	u8 par;
+
+	/* setup Port FECI2C Pin Assignment Register for I2C */
+	/*  set PAR_SCL to SCL and PAR_SDA to SDA */
+	par = readb(MCFGPIO_PAR_FECI2C);
+	par |= 0x0f;
+	writeb(par, MCFGPIO_PAR_FECI2C);
+#elif defined(CONFIG_M5275)
+	u16 par;
+
+	/* setup Port FECI2C Pin Assignment Register for I2C */
+	/*  set PAR_SCL to SCL and PAR_SDA to SDA */
+	par = readw(MCFGPIO_PAR_FECI2C);
+	par |= 0x0f;
+	writew(par, MCFGPIO_PAR_FECI2C);
+#endif
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
+/***************************************************************************/
+
 static void __init m527x_uarts_init(void)
 {
 	u16 sepmask;
@@ -122,6 +149,7 @@ void __init config_BSP(char *commandp, int size)
 	m527x_uarts_init();
 	m527x_fec_init();
 	m527x_qspi_init();
+	m527x_i2c_init();
 }
 
 /***************************************************************************/

arch/m68k/coldfire/m528x.c

@@ -36,6 +36,7 @@ DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
 DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK);
 DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
 DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
 
 struct clk *mcf_clks[] = {
 	&clk_pll,
@@ -49,6 +50,7 @@ struct clk *mcf_clks[] = {
 	&clk_mcfuart2,
 	&clk_mcfqspi0,
 	&clk_fec0,
+	&clk_mcfi2c0,
 	NULL
 };
 
@@ -64,6 +66,21 @@ static void __init m528x_qspi_init(void)
 
 /***************************************************************************/
 
+static void __init m528x_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	u16 paspar;
+
+	/* setup Port AS Pin Assignment Register for I2C */
+	/*  set PASPA0 to SCL and PASPA1 to SDA */
+	paspar = readw(MCFGPIO_PASPAR);
+	paspar |= 0xF;
+	writew(paspar, MCFGPIO_PASPAR);
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
+/***************************************************************************/
+
 static void __init m528x_uarts_init(void)
 {
 	u8 port;
@@ -127,6 +144,7 @@ void __init config_BSP(char *commandp, int size)
 	m528x_uarts_init();
 	m528x_fec_init();
 	m528x_qspi_init();
+	m528x_i2c_init();
 }
 
 /***************************************************************************/

arch/m68k/coldfire/m5307.c

@@ -35,6 +35,7 @@ DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
 DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
 DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
 DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
 
 struct clk *mcf_clks[] = {
 	&clk_pll,
@@ -43,11 +44,23 @@ struct clk *mcf_clks[] = {
 	&clk_mcftmr1,
 	&clk_mcfuart0,
 	&clk_mcfuart1,
+	&clk_mcfi2c0,
 	NULL
 };
 
 /***************************************************************************/
 
+static void __init m5307_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
+	       MCFSIM_I2CICR);
+	mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 #if defined(CONFIG_NETtel) || \
@@ -73,6 +86,7 @@ void __init config_BSP(char *commandp, int size)
 	 */
 	wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
 #endif
+	m5307_i2c_init();
 }
 
 /***************************************************************************/

arch/m68k/coldfire/m53xx.c

@@ -38,7 +38,7 @@ DEFINE_CLK(0, "edma", 17, MCF_CLK);
 DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
 DEFINE_CLK(0, "intc.1", 19, MCF_CLK);
 DEFINE_CLK(0, "iack.0", 21, MCF_CLK);
-DEFINE_CLK(0, "mcfi2c.0", 22, MCF_CLK);
+DEFINE_CLK(0, "imx1-i2c.0", 22, MCF_CLK);
 DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK);
 DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
 DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
@@ -77,7 +77,7 @@ struct clk *mcf_clks[] = {
 	&__clk_0_18,	/* intc.0 */
 	&__clk_0_19,	/* intc.1 */
 	&__clk_0_21,	/* iack.0 */
-	&__clk_0_22,	/* mcfi2c.0 */
+	&__clk_0_22,	/* imx1-i2c.0 */
 	&__clk_0_23,	/* mcfqspi.0 */
 	&__clk_0_24,	/* mcfuart.0 */
 	&__clk_0_25,	/* mcfuart.1 */
@@ -133,7 +133,7 @@ static struct clk * const disable_clks[] __initconst = {
 	&__clk_0_8,	/* mcfcan.0 */
 	&__clk_0_12,	/* fec.0 */
 	&__clk_0_17,	/* edma */
-	&__clk_0_22,	/* mcfi2c.0 */
+	&__clk_0_22,	/* imx1-i2c.0 */
 	&__clk_0_23,	/* mcfqspi.0 */
 	&__clk_0_30,	/* mcftmr.2 */
 	&__clk_0_31,	/* mcftmr.3 */
@@ -176,6 +176,19 @@ static void __init m53xx_qspi_init(void)
 
 /***************************************************************************/
 
+static void __init m53xx_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	/* setup Port AS Pin Assignment Register for I2C */
+	/*  set PASPA0 to SCL and PASPA1 to SDA */
+	u8 r = readb(MCFGPIO_PAR_FECI2C);
+	r |= 0x0f;
+	writeb(r, MCFGPIO_PAR_FECI2C);
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
+/***************************************************************************/
+
 static void __init m53xx_uarts_init(void)
 {
 	/* UART GPIO initialization */
@@ -218,6 +231,7 @@ void __init config_BSP(char *commandp, int size)
 	m53xx_uarts_init();
 	m53xx_fec_init();
 	m53xx_qspi_init();
+	m53xx_i2c_init();
 
 #ifdef CONFIG_BDM_DISABLE
 	/*

arch/m68k/coldfire/m5407.c

@@ -26,6 +26,7 @@ DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
 DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
 DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
 DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
 
 struct clk *mcf_clks[] = {
 	&clk_pll,
@@ -34,11 +35,23 @@ struct clk *mcf_clks[] = {
 	&clk_mcftmr1,
 	&clk_mcfuart0,
 	&clk_mcfuart1,
+	&clk_mcfi2c0,
 	NULL
 };
 
 /***************************************************************************/
 
+static void __init m5407_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
+	       MCFSIM_I2CICR);
+	mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
 	mach_sched_init = hw_timer_init;
@@ -48,6 +61,7 @@ void __init config_BSP(char *commandp, int size)
 	mcf_mapirq2imr(27, MCFINTC_EINT3);
 	mcf_mapirq2imr(29, MCFINTC_EINT5);
 	mcf_mapirq2imr(31, MCFINTC_EINT7);
+	m5407_i2c_init();
 }
 
 /***************************************************************************/

arch/m68k/coldfire/m5441x.c

@@ -19,13 +19,13 @@
 DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
 DEFINE_CLK(0, "mcfcan.0", 8, MCF_CLK);
 DEFINE_CLK(0, "mcfcan.1", 9, MCF_CLK);
-DEFINE_CLK(0, "mcfi2c.1", 14, MCF_CLK);
+DEFINE_CLK(0, "imx1-i2c.1", 14, MCF_CLK);
 DEFINE_CLK(0, "mcfdspi.1", 15, MCF_CLK);
 DEFINE_CLK(0, "edma", 17, MCF_CLK);
 DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
 DEFINE_CLK(0, "intc.1", 19, MCF_CLK);
 DEFINE_CLK(0, "intc.2", 20, MCF_CLK);
-DEFINE_CLK(0, "mcfi2c.0", 22, MCF_CLK);
+DEFINE_CLK(0, "imx1-i2c.0", 22, MCF_CLK);
 DEFINE_CLK(0, "mcfdspi.0", 23, MCF_CLK);
 DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
 DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
@@ -59,10 +59,10 @@ DEFINE_CLK(0, "switch.1", 56, MCF_CLK);
 DEFINE_CLK(0, "nand.0", 63, MCF_CLK);
 
 DEFINE_CLK(1, "mcfow.0", 2, MCF_CLK);
-DEFINE_CLK(1, "mcfi2c.2", 4, MCF_CLK);
-DEFINE_CLK(1, "mcfi2c.3", 5, MCF_CLK);
-DEFINE_CLK(1, "mcfi2c.4", 6, MCF_CLK);
-DEFINE_CLK(1, "mcfi2c.5", 7, MCF_CLK);
+DEFINE_CLK(1, "imx1-i2c.2", 4, MCF_CLK);
+DEFINE_CLK(1, "imx1-i2c.3", 5, MCF_CLK);
+DEFINE_CLK(1, "imx1-i2c.4", 6, MCF_CLK);
+DEFINE_CLK(1, "imx1-i2c.5", 7, MCF_CLK);
 DEFINE_CLK(1, "mcfuart.4", 24, MCF_BUSCLK);
 DEFINE_CLK(1, "mcfuart.5", 25, MCF_BUSCLK);
 DEFINE_CLK(1, "mcfuart.6", 26, MCF_BUSCLK);

arch/m68k/coldfire/m54xx.c

@@ -37,6 +37,7 @@ DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
 DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
 DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK);
 DEFINE_CLK(mcfuart3, "mcfuart.3", MCF_BUSCLK);
+DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
 
 struct clk *mcf_clks[] = {
 	&clk_pll,
@@ -47,6 +48,7 @@ struct clk *mcf_clks[] = {
 	&clk_mcfuart1,
 	&clk_mcfuart2,
 	&clk_mcfuart3,
+	&clk_mcfi2c0,
 	NULL
 };
 
@@ -65,6 +67,20 @@ static void __init m54xx_uarts_init(void)
 
 /***************************************************************************/
 
+static void __init m54xx_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	u32 r;
+
+	/* set the fec/i2c/irq pin assignment register for i2c */
+	r = readl(MCF_PAR_FECI2CIRQ);
+	r |= MCF_PAR_FECI2CIRQ_SDA | MCF_PAR_FECI2CIRQ_SCL;
+	writel(r, MCF_PAR_FECI2CIRQ);
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
+/***************************************************************************/
+
 static void mcf54xx_reset(void)
 {
 	/* disable interrupts and enable the watchdog */
@@ -86,6 +102,7 @@ void __init config_BSP(char *commandp, int size)
 	mach_reset = mcf54xx_reset;
 	mach_sched_init = hw_timer_init;
 	m54xx_uarts_init();
+	m54xx_i2c_init();
 }
 
 /***************************************************************************/

arch/m68k/configs/amcore_defconfig

+CONFIG_LOCALVERSION="amcore-001"
+CONFIG_DEFAULT_HOSTNAME="amcore"
+CONFIG_SYSVIPC=y
+# CONFIG_FHANDLE is not set
+# CONFIG_USELIB is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_NAMESPACES=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_AIO is not set
+# CONFIG_ADVISE_SYSCALLS is not set
+# CONFIG_MEMBARRIER is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_MMU is not set
+CONFIG_M5307=y
+CONFIG_AMCORE=y
+CONFIG_UBOOT=y
+CONFIG_RAMSIZE=0x1000000
+CONFIG_KERNELBASE=0x20000
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BINFMT_FLAT=y
+# CONFIG_COREDUMP is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_UEVENT_HELPER is not set
+CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_UCLINUX=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+CONFIG_DM9000=y
+# CONFIG_NET_VENDOR_EZCHIP is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_RENESAS is not set
+# CONFIG_NET_VENDOR_ROCKER is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_DEVMEM is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=115200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_IMX=y
+CONFIG_PPS=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_SYSTOHC is not set
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_FSCACHE=y
+# CONFIG_PROC_SYSCTL is not set
+CONFIG_JFFS2_FS=y
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BOTH=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
+CONFIG_PANIC_ON_OOPS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_CRYPTO_ECHAINIV is not set
+CONFIG_CRYPTO_ANSI_CPRNG=y
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC16=y

arch/m68k/include/asm/m5206sim.h

@@ -110,6 +110,7 @@
 /*
  *	Define system peripheral IRQ usage.
  */
+#define	MCF_IRQ_I2C0		29		/* I2C, Level 5 */
 #define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
 #define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
 #define	MCF_IRQ_UART0		73		/* UART0 */
@@ -138,6 +139,7 @@
 #define	MCFSIM_SWDICR		MCFSIM_ICR8	/* Watchdog timer ICR */
 #define	MCFSIM_TIMER1ICR	MCFSIM_ICR9	/* Timer 1 ICR */
 #define	MCFSIM_TIMER2ICR	MCFSIM_ICR10	/* Timer 2 ICR */
+#define	MCFSIM_I2CICR		MCFSIM_ICR11	/* I2C ICR */
 #define	MCFSIM_UART1ICR		MCFSIM_ICR12	/* UART 1 ICR */
 #define	MCFSIM_UART2ICR		MCFSIM_ICR13	/* UART 2 ICR */
 #ifdef CONFIG_M5206e
@@ -145,5 +147,11 @@
 #define	MCFSIM_DMA2ICR		MCFSIM_ICR15	/* DMA 2 ICR */
 #endif
 
+/*
+ * I2C Controller
+*/
+#define MCFI2C_BASE0		(MCF_MBAR + 0x1e0)
+#define MCFI2C_SIZE0		0x40
+
 /****************************************************************************/
 #endif	/* m5206sim_h */

arch/m68k/include/asm/m520xsim.h

@@ -50,6 +50,7 @@
 #define MCFINT_UART0        26          /* Interrupt number for UART0 */
 #define MCFINT_UART1        27          /* Interrupt number for UART1 */
 #define MCFINT_UART2        28          /* Interrupt number for UART2 */
+#define MCFINT_I2C0         30          /* Interrupt number for I2C */
 #define MCFINT_QSPI         31          /* Interrupt number for QSPI */
 #define MCFINT_FECRX0	    36		/* Interrupt number for FEC RX */
 #define MCFINT_FECTX0	    40		/* Interrupt number for FEC RX */
@@ -67,6 +68,7 @@
 #define	MCF_IRQ_QSPI	    (MCFINT_VECBASE + MCFINT_QSPI)
 #define MCF_IRQ_PIT1        (MCFINT_VECBASE + MCFINT_PIT1)
 
+#define MCF_IRQ_I2C0        (MCFINT_VECBASE + MCFINT_I2C0)
 /*
  *  SDRAM configuration registers.
  */
@@ -200,5 +202,11 @@
 #define MCFPM_PPMLR0		0xfc040034
 #define MCFPM_LPCR		0xfc0a0007
 
+/*
+ * I2C module.
+ */
+#define MCFI2C_BASE0		0xFC058000
+#define MCFI2C_SIZE0		0x40
+
 /****************************************************************************/
 #endif  /* m520xsim_h */

arch/m68k/include/asm/m523xsim.h

@@ -37,7 +37,8 @@
 #define	MCFINT_UART0		13		/* Interrupt number for UART0 */
 #define	MCFINT_UART1		14		/* Interrupt number for UART1 */
 #define	MCFINT_UART2		15		/* Interrupt number for UART2 */
-#define MCFINT_QSPI		18		/* Interrupt number for QSPI */
+#define	MCFINT_I2C0		17		/* Interrupt number for I2C */
+#define	MCFINT_QSPI		18		/* Interrupt number for QSPI */
 #define	MCFINT_FECRX0		23		/* Interrupt number for FEC */
 #define	MCFINT_FECTX0		27		/* Interrupt number for FEC */
 #define	MCFINT_FECENTC0		29		/* Interrupt number for FEC */
@@ -53,6 +54,7 @@
 
 #define	MCF_IRQ_QSPI		(MCFINT_VECBASE + MCFINT_QSPI)
 #define MCF_IRQ_PIT1		(MCFINT_VECBASE + MCFINT_PIT1)
+#define	MCF_IRQ_I2C0		(MCFINT_VECBASE + MCFINT_I2C0)
 
 /*
  *	SDRAM configuration registers.
@@ -208,5 +210,11 @@
 #define	MCFDMA_BASE2		(MCF_IPSBAR + 0x180)
 #define	MCFDMA_BASE3		(MCF_IPSBAR + 0x1C0)
 
+/*
+ * I2C module.
+ */
+#define	MCFI2C_BASE0		(MCF_IPSBAR + 0x300)
+#define	MCFI2C_SIZE0		0x40
+
 /****************************************************************************/
 #endif	/* m523xsim_h */

arch/m68k/include/asm/m527xsim.h

@@ -37,6 +37,7 @@
 #define	MCFINT_UART0		13		/* Interrupt number for UART0 */
 #define	MCFINT_UART1		14		/* Interrupt number for UART1 */
 #define	MCFINT_UART2		15		/* Interrupt number for UART2 */
+#define	MCFINT_I2C0		17		/* Interrupt number for I2C */
 #define	MCFINT_QSPI		18		/* Interrupt number for QSPI */
 #define	MCFINT_FECRX0		23		/* Interrupt number for FEC0 */
 #define	MCFINT_FECTX0		27		/* Interrupt number for FEC0 */
@@ -61,6 +62,7 @@
 
 #define	MCF_IRQ_QSPI		(MCFINT_VECBASE + MCFINT_QSPI)
 #define MCF_IRQ_PIT1		(MCFINT_VECBASE + MCFINT_PIT1)
+#define	MCF_IRQ_I2C0		(MCFINT_VECBASE + MCFINT_I2C0)
 
 /*
  *	SDRAM configuration registers.
@@ -353,5 +355,11 @@
 #define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
 #define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
 
+/*
+ * I2C module.
+ */
+#define	MCFI2C_BASE0		(MCF_IPSBAR + 0x300)
+#define	MCFI2C_SIZE0		0x40
+
 /****************************************************************************/
 #endif	/* m527xsim_h */

arch/m68k/include/asm/m528xsim.h

@@ -37,6 +37,7 @@
 #define	MCFINT_UART0		13		/* Interrupt number for UART0 */
 #define	MCFINT_UART1		14		/* Interrupt number for UART1 */
 #define	MCFINT_UART2		15		/* Interrupt number for UART2 */
+#define	MCFINT_I2C0		17		/* Interrupt number for I2C */
 #define	MCFINT_QSPI		18		/* Interrupt number for QSPI */
 #define	MCFINT_FECRX0		23		/* Interrupt number for FEC */
 #define	MCFINT_FECTX0		27		/* Interrupt number for FEC */
@@ -53,6 +54,8 @@
 
 #define	MCF_IRQ_QSPI		(MCFINT_VECBASE + MCFINT_QSPI)
 #define MCF_IRQ_PIT1		(MCFINT_VECBASE + MCFINT_PIT1)
+#define	MCF_IRQ_I2C0		(MCFINT_VECBASE + MCFINT_I2C0)
+
 /*
  *	SDRAM configuration registers.
  */
@@ -242,5 +245,11 @@
 #define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
 #define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
 
+/*
+ * I2C module
+ */
+#define	MCFI2C_BASE0		(MCF_IPSBAR + 0x300)
+#define	MCFI2C_SIZE0		0x40
+
 /****************************************************************************/
 #endif	/* m528xsim_h */

arch/m68k/include/asm/m5307sim.h

@@ -148,6 +148,7 @@
 #define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
 #define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
 #define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
+#define	MCFSIM_I2CICR		MCFSIM_ICR3	/* I2C ICR */
 #define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
 #define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
 #define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
@@ -155,7 +156,6 @@
 #define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
 #define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
 
-
 /*
  *	Some symbol defines for the Parallel Port Pin Assignment Register
  */
@@ -174,10 +174,17 @@
 /*
  *	Define system peripheral IRQ usage.
  */
+#define	MCF_IRQ_I2C0		29		/* I2C, Level 5 */
 #define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
 #define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
 #define	MCF_IRQ_UART0		73		/* UART0 */
 #define	MCF_IRQ_UART1		74		/* UART1 */
 
+/*
+ * I2C module
+ */
+#define	MCFI2C_BASE0		(MCF_MBAR + 0x280)
+#define	MCFI2C_SIZE0		0x40
+
 /****************************************************************************/
 #endif	/* m5307sim_h */

arch/m68k/include/asm/m53xxsim.h

@@ -19,6 +19,7 @@
 #define MCFINT_UART0        26          /* Interrupt number for UART0 */
 #define MCFINT_UART1        27          /* Interrupt number for UART1 */
 #define MCFINT_UART2        28          /* Interrupt number for UART2 */
+#define MCFINT_I2C0         30		/* Interrupt number for I2C */
 #define MCFINT_QSPI         31          /* Interrupt number for QSPI */
 #define MCFINT_FECRX0	    36		/* Interrupt number for FEC */
 #define MCFINT_FECTX0	    40		/* Interrupt number for FEC */
@@ -32,6 +33,7 @@
 #define MCF_IRQ_FECTX0	    (MCFINT_VECBASE + MCFINT_FECTX0)
 #define MCF_IRQ_FECENTC0    (MCFINT_VECBASE + MCFINT_FECENTC0)
 
+#define	MCF_IRQ_I2C0	    (MCFINT_VECBASE + MCFINT_I2C0)
 #define	MCF_IRQ_QSPI	    (MCFINT_VECBASE + MCFINT_QSPI)
 
 #define MCF_WTM_WCR		0xFC098000
@@ -1237,5 +1239,11 @@
 #define MCFEPORT_EPPDR                (0xFC094005)
 #define MCFEPORT_EPFR                 (0xFC094006)
 
+/*
+ * I2C Module
+ */
+#define	MCFI2C_BASE0			(0xFc058000)
+#define	MCFI2C_SIZE0			0x40
+
 /********************************************************************/
 #endif	/* m53xxsim_h */

arch/m68k/include/asm/m5407sim.h

@@ -112,6 +112,7 @@
 #define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
 #define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
 #define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
+#define	MCFSIM_I2CICR		MCFSIM_ICR3	/* I2C ICR */
 #define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
 #define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
 #define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
@@ -137,10 +138,17 @@
 /*
  *	Define system peripheral IRQ usage.
  */
+#define	MCF_IRQ_I2C0		29		/* I2C, Level 5 */
 #define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
 #define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
 #define	MCF_IRQ_UART0		73		/* UART0 */
 #define	MCF_IRQ_UART1		74		/* UART1 */
 
+/*
+ * I2C module
+ */
+#define	MCFI2C_BASE0		(MCF_MBAR + 0x280)
+#define	MCFI2C_SIZE0		0x40
+
 /****************************************************************************/
 #endif	/* m5407sim_h */

arch/m68k/include/asm/m54xxsim.h

@@ -45,6 +45,7 @@
  */
 #define MCF_IRQ_TIMER		(MCFINT_VECBASE + 54)	/* Slice Timer 0 */
 #define MCF_IRQ_PROFILER	(MCFINT_VECBASE + 53)	/* Slice Timer 1 */
+#define MCF_IRQ_I2C0		(MCFINT_VECBASE + 40)
 #define MCF_IRQ_UART0		(MCFINT_VECBASE + 35)
 #define MCF_IRQ_UART1		(MCFINT_VECBASE + 34)
 #define MCF_IRQ_UART2		(MCFINT_VECBASE + 33)
@@ -107,4 +108,14 @@
 #define MCF_PAR_PSC_RTS_RTS	(0x30)
 #define MCF_PAR_PSC_CANRX	(0x40)
 
+#define MCF_PAR_FECI2CIRQ	(MCF_MBAR + 0x00000a44)	/* FEC/I2C/IRQ */
+#define MCF_PAR_FECI2CIRQ_SDA	(1 << 3)
+#define MCF_PAR_FECI2CIRQ_SCL	(1 << 2)
+
+/*
+ * I2C module.
+ */
+#define MCFI2C_BASE0		(MCF_MBAR + 0x8f00)
+#define MCFI2C_SIZE0		0x40
+
 #endif	/* m54xxsim_h */