Commit 027fb89e authored by Adrian Hunter's avatar Adrian Hunter Committed by Ulf Hansson

mmc: sdhci-pci: Do not disable interrupts in sdhci_intel_set_power

Disabling interrupts for even a millisecond can cause problems for some
devices. That can happen when Intel host controllers wait for the present
state to propagate.

The spin lock is not necessary here. Anything that is racing with changes
to the I/O state is already broken. The mmc core already provides
synchronization via "claiming" the host.

Although the spin lock probably should be removed from the code paths that
lead to this point, such a patch would touch too much code to be suitable
for stable trees. Consequently, for this patch, just drop the spin lock
while waiting.
Signed-off-by: default avatarAdrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Tested-by: default avatarLudovic Desroches <ludovic.desroches@microchip.com>
parent e2ebfb21
...@@ -451,6 +451,8 @@ static void sdhci_intel_set_power(struct sdhci_host *host, unsigned char mode, ...@@ -451,6 +451,8 @@ static void sdhci_intel_set_power(struct sdhci_host *host, unsigned char mode,
if (mode == MMC_POWER_OFF) if (mode == MMC_POWER_OFF)
return; return;
spin_unlock_irq(&host->lock);
/* /*
* Bus power might not enable after D3 -> D0 transition due to the * Bus power might not enable after D3 -> D0 transition due to the
* present state not yet having propagated. Retry for up to 2ms. * present state not yet having propagated. Retry for up to 2ms.
...@@ -463,6 +465,8 @@ static void sdhci_intel_set_power(struct sdhci_host *host, unsigned char mode, ...@@ -463,6 +465,8 @@ static void sdhci_intel_set_power(struct sdhci_host *host, unsigned char mode,
reg |= SDHCI_POWER_ON; reg |= SDHCI_POWER_ON;
sdhci_writeb(host, reg, SDHCI_POWER_CONTROL); sdhci_writeb(host, reg, SDHCI_POWER_CONTROL);
} }
spin_lock_irq(&host->lock);
} }
static const struct sdhci_ops sdhci_intel_byt_ops = { static const struct sdhci_ops sdhci_intel_byt_ops = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment