Commit 02b4e275 authored by Russell King's avatar Russell King

ARM: v7 setup function should invalidate L1 cache

All ARMv5 and older CPUs invalidate their caches in the early assembly
setup function, prior to enabling the MMU.  This is because the L1
cache should not contain any data relevant to the execution of the
kernel at this point; all data should have been flushed out to memory.

This requirement should also be true for ARMv6 and ARMv7 CPUs - indeed,
these typically do not search their caches when caching is disabled (as
it needs to be when the MMU is disabled) so this change should be safe.

ARMv7 allows there to be CPUs which search their caches while caching is
disabled, and it's permitted that the cache is uninitialised at boot;
for these, the architecture reference manual requires that an
implementation specific code sequence is used immediately after reset
to ensure that the cache is placed into a sane state.  Such
functionality is definitely outside the remit of the Linux kernel, and
must be done by the SoC's firmware before _any_ CPU gets to the Linux
kernel.

Changing the data cache clean+invalidate to a mere invalidate allows us
to get rid of a lot of platform specific hacks around this issue for
their secondary CPU bringup paths - some of which were buggy.
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Tested-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Tested-by: default avatarHeiko Stuebner <heiko@sntech.de>
Tested-by: default avatarDinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: default avatarSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: default avatarSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: default avatarShawn Guo <shawn.guo@linaro.org>
Tested-by: default avatarThierry Reding <treding@nvidia.com>
Acked-by: default avatarThierry Reding <treding@nvidia.com>
Tested-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Tested-by: default avatarMichal Simek <michal.simek@xilinx.com>
Tested-by: default avatarWei Xu <xuwei5@hisilicon.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 6a53bc75
...@@ -43,5 +43,5 @@ obj-$(CONFIG_ARCH_BCM_63XX) := bcm63xx.o ...@@ -43,5 +43,5 @@ obj-$(CONFIG_ARCH_BCM_63XX) := bcm63xx.o
ifeq ($(CONFIG_ARCH_BRCMSTB),y) ifeq ($(CONFIG_ARCH_BRCMSTB),y)
CFLAGS_platsmp-brcmstb.o += -march=armv7-a CFLAGS_platsmp-brcmstb.o += -march=armv7-a
obj-y += brcmstb.o obj-y += brcmstb.o
obj-$(CONFIG_SMP) += headsmp-brcmstb.o platsmp-brcmstb.o obj-$(CONFIG_SMP) += platsmp-brcmstb.o
endif endif
/*
* Copyright (C) 2013-2014 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __BRCMSTB_H__
#define __BRCMSTB_H__
void brcmstb_secondary_startup(void);
#endif /* __BRCMSTB_H__ */
/*
* SMP boot code for secondary CPUs
* Based on arch/arm/mach-tegra/headsmp.S
*
* Copyright (C) 2010 NVIDIA, Inc.
* Copyright (C) 2013-2014 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <asm/assembler.h>
#include <linux/linkage.h>
#include <linux/init.h>
.section ".text.head", "ax"
ENTRY(brcmstb_secondary_startup)
/*
* Ensure CPU is in a sane state by disabling all IRQs and switching
* into SVC mode.
*/
setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0
bl v7_invalidate_l1
b secondary_startup
ENDPROC(brcmstb_secondary_startup)
...@@ -30,8 +30,6 @@ ...@@ -30,8 +30,6 @@
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <asm/smp_plat.h> #include <asm/smp_plat.h>
#include "brcmstb.h"
enum { enum {
ZONE_MAN_CLKEN_MASK = BIT(0), ZONE_MAN_CLKEN_MASK = BIT(0),
ZONE_MAN_RESET_CNTL_MASK = BIT(1), ZONE_MAN_RESET_CNTL_MASK = BIT(1),
...@@ -153,7 +151,7 @@ static void brcmstb_cpu_boot(u32 cpu) ...@@ -153,7 +151,7 @@ static void brcmstb_cpu_boot(u32 cpu)
* Set the reset vector to point to the secondary_startup * Set the reset vector to point to the secondary_startup
* routine * routine
*/ */
cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup)); cpu_set_boot_addr(cpu, virt_to_phys(secondary_startup));
/* Unhalt the cpu */ /* Unhalt the cpu */
cpu_rst_cfg_set(cpu, 0); cpu_rst_cfg_set(cpu, 0);
......
...@@ -12,12 +12,6 @@ ...@@ -12,12 +12,6 @@
#include <linux/init.h> #include <linux/init.h>
#include <asm/assembler.h> #include <asm/assembler.h>
ENTRY(berlin_secondary_startup)
ARM_BE8(setend be)
bl v7_invalidate_l1
b secondary_startup
ENDPROC(berlin_secondary_startup)
/* /*
* If the following instruction is set in the reset exception vector, CPUs * If the following instruction is set in the reset exception vector, CPUs
* will fetch the value of the software reset address vector when being * will fetch the value of the software reset address vector when being
......
...@@ -22,7 +22,6 @@ ...@@ -22,7 +22,6 @@
#define RESET_VECT 0x00 #define RESET_VECT 0x00
#define SW_RESET_ADDR 0x94 #define SW_RESET_ADDR 0x94
extern void berlin_secondary_startup(void);
extern u32 boot_inst; extern u32 boot_inst;
static void __iomem *cpu_ctrl; static void __iomem *cpu_ctrl;
...@@ -85,7 +84,7 @@ static void __init berlin_smp_prepare_cpus(unsigned int max_cpus) ...@@ -85,7 +84,7 @@ static void __init berlin_smp_prepare_cpus(unsigned int max_cpus)
* Write the secondary startup address into the SW reset address * Write the secondary startup address into the SW reset address
* vector. This is used by boot_inst. * vector. This is used by boot_inst.
*/ */
writel(virt_to_phys(berlin_secondary_startup), vectors_base + SW_RESET_ADDR); writel(virt_to_phys(secondary_startup), vectors_base + SW_RESET_ADDR);
iounmap(vectors_base); iounmap(vectors_base);
unmap_scu: unmap_scu:
......
...@@ -6,4 +6,4 @@ CFLAGS_platmcpm.o := -march=armv7-a ...@@ -6,4 +6,4 @@ CFLAGS_platmcpm.o := -march=armv7-a
obj-y += hisilicon.o obj-y += hisilicon.o
obj-$(CONFIG_MCPM) += platmcpm.o obj-$(CONFIG_MCPM) += platmcpm.o
obj-$(CONFIG_SMP) += platsmp.o hotplug.o headsmp.o obj-$(CONFIG_SMP) += platsmp.o hotplug.o
...@@ -12,7 +12,6 @@ extern void hi3xxx_cpu_die(unsigned int cpu); ...@@ -12,7 +12,6 @@ extern void hi3xxx_cpu_die(unsigned int cpu);
extern int hi3xxx_cpu_kill(unsigned int cpu); extern int hi3xxx_cpu_kill(unsigned int cpu);
extern void hi3xxx_set_cpu(int cpu, bool enable); extern void hi3xxx_set_cpu(int cpu, bool enable);
extern void hisi_secondary_startup(void);
extern struct smp_operations hix5hd2_smp_ops; extern struct smp_operations hix5hd2_smp_ops;
extern void hix5hd2_set_cpu(int cpu, bool enable); extern void hix5hd2_set_cpu(int cpu, bool enable);
extern void hix5hd2_cpu_die(unsigned int cpu); extern void hix5hd2_cpu_die(unsigned int cpu);
......
/*
* Copyright (c) 2014 Hisilicon Limited.
* Copyright (c) 2014 Linaro Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <linux/init.h>
__CPUINIT
ENTRY(hisi_secondary_startup)
bl v7_invalidate_l1
b secondary_startup
...@@ -118,7 +118,7 @@ static int hix5hd2_boot_secondary(unsigned int cpu, struct task_struct *idle) ...@@ -118,7 +118,7 @@ static int hix5hd2_boot_secondary(unsigned int cpu, struct task_struct *idle)
{ {
phys_addr_t jumpaddr; phys_addr_t jumpaddr;
jumpaddr = virt_to_phys(hisi_secondary_startup); jumpaddr = virt_to_phys(secondary_startup);
hix5hd2_set_scu_boot_addr(HIX5HD2_BOOT_ADDRESS, jumpaddr); hix5hd2_set_scu_boot_addr(HIX5HD2_BOOT_ADDRESS, jumpaddr);
hix5hd2_set_cpu(cpu, true); hix5hd2_set_cpu(cpu, true);
arch_send_wakeup_ipi_mask(cpumask_of(cpu)); arch_send_wakeup_ipi_mask(cpumask_of(cpu));
...@@ -156,7 +156,7 @@ static int hip01_boot_secondary(unsigned int cpu, struct task_struct *idle) ...@@ -156,7 +156,7 @@ static int hip01_boot_secondary(unsigned int cpu, struct task_struct *idle)
struct device_node *node; struct device_node *node;
jumpaddr = virt_to_phys(hisi_secondary_startup); jumpaddr = virt_to_phys(secondary_startup);
hip01_set_boot_addr(HIP01_BOOT_ADDRESS, jumpaddr); hip01_set_boot_addr(HIP01_BOOT_ADDRESS, jumpaddr);
node = of_find_compatible_node(NULL, NULL, "hisilicon,hip01-sysctrl"); node = of_find_compatible_node(NULL, NULL, "hisilicon,hip01-sysctrl");
......
...@@ -25,7 +25,6 @@ diag_reg_offset: ...@@ -25,7 +25,6 @@ diag_reg_offset:
.endm .endm
ENTRY(v7_secondary_startup) ENTRY(v7_secondary_startup)
bl v7_invalidate_l1
set_diag_reg set_diag_reg
b secondary_startup b secondary_startup
ENDPROC(v7_secondary_startup) ENDPROC(v7_secondary_startup)
...@@ -21,7 +21,6 @@ ...@@ -21,7 +21,6 @@
ENTRY(mvebu_cortex_a9_secondary_startup) ENTRY(mvebu_cortex_a9_secondary_startup)
ARM_BE8(setend be) ARM_BE8(setend be)
bl v7_invalidate_l1
bl armada_38x_scu_power_up bl armada_38x_scu_power_up
b secondary_startup b secondary_startup
ENDPROC(mvebu_cortex_a9_secondary_startup) ENDPROC(mvebu_cortex_a9_secondary_startup)
...@@ -15,7 +15,6 @@ ...@@ -15,7 +15,6 @@
* ready for them to initialise. * ready for them to initialise.
*/ */
ENTRY(sirfsoc_secondary_startup) ENTRY(sirfsoc_secondary_startup)
bl v7_invalidate_l1
mrc p15, 0, r0, c0, c0, 5 mrc p15, 0, r0, c0, c0, 5
and r0, r0, #15 and r0, r0, #15
adr r4, 1f adr r4, 1f
......
...@@ -17,4 +17,3 @@ extern char rockchip_secondary_trampoline; ...@@ -17,4 +17,3 @@ extern char rockchip_secondary_trampoline;
extern char rockchip_secondary_trampoline_end; extern char rockchip_secondary_trampoline_end;
extern unsigned long rockchip_boot_fn; extern unsigned long rockchip_boot_fn;
extern void rockchip_secondary_startup(void);
...@@ -15,14 +15,6 @@ ...@@ -15,14 +15,6 @@
#include <linux/linkage.h> #include <linux/linkage.h>
#include <linux/init.h> #include <linux/init.h>
ENTRY(rockchip_secondary_startup)
mrc p15, 0, r0, c0, c0, 0 @ read main ID register
ldr r1, =0x00000c09 @ Cortex-A9 primary part number
teq r0, r1
beq v7_invalidate_l1
b secondary_startup
ENDPROC(rockchip_secondary_startup)
ENTRY(rockchip_secondary_trampoline) ENTRY(rockchip_secondary_trampoline)
ldr pc, 1f ldr pc, 1f
ENDPROC(rockchip_secondary_trampoline) ENDPROC(rockchip_secondary_trampoline)
......
...@@ -149,8 +149,7 @@ static int __cpuinit rockchip_boot_secondary(unsigned int cpu, ...@@ -149,8 +149,7 @@ static int __cpuinit rockchip_boot_secondary(unsigned int cpu,
* sram_base_addr + 8: start address for pc * sram_base_addr + 8: start address for pc
* */ * */
udelay(10); udelay(10);
writel(virt_to_phys(rockchip_secondary_startup), writel(virt_to_phys(secondary_startup), sram_base_addr + 8);
sram_base_addr + 8);
writel(0xDEADBEAF, sram_base_addr + 4); writel(0xDEADBEAF, sram_base_addr + 4);
dsb_sev(); dsb_sev();
} }
...@@ -189,7 +188,7 @@ static int __init rockchip_smp_prepare_sram(struct device_node *node) ...@@ -189,7 +188,7 @@ static int __init rockchip_smp_prepare_sram(struct device_node *node)
} }
/* set the boot function for the sram code */ /* set the boot function for the sram code */
rockchip_boot_fn = virt_to_phys(rockchip_secondary_startup); rockchip_boot_fn = virt_to_phys(secondary_startup);
/* copy the trampoline to sram, that runs during startup of the core */ /* copy the trampoline to sram, that runs during startup of the core */
memcpy(sram_base_addr, &rockchip_secondary_trampoline, trampoline_sz); memcpy(sram_base_addr, &rockchip_secondary_trampoline, trampoline_sz);
......
...@@ -14,7 +14,6 @@ extern void shmobile_smp_sleep(void); ...@@ -14,7 +14,6 @@ extern void shmobile_smp_sleep(void);
extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn, extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn,
unsigned long arg); unsigned long arg);
extern int shmobile_smp_cpu_disable(unsigned int cpu); extern int shmobile_smp_cpu_disable(unsigned int cpu);
extern void shmobile_invalidate_start(void);
extern void shmobile_boot_scu(void); extern void shmobile_boot_scu(void);
extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus); extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus);
extern void shmobile_smp_scu_cpu_die(unsigned int cpu); extern void shmobile_smp_scu_cpu_die(unsigned int cpu);
......
...@@ -22,7 +22,7 @@ ...@@ -22,7 +22,7 @@
* Boot code for secondary CPUs. * Boot code for secondary CPUs.
* *
* First we turn on L1 cache coherency for our CPU. Then we jump to * First we turn on L1 cache coherency for our CPU. Then we jump to
* shmobile_invalidate_start that invalidates the cache and hands over control * secondary_startup that invalidates the cache and hands over control
* to the common ARM startup code. * to the common ARM startup code.
*/ */
ENTRY(shmobile_boot_scu) ENTRY(shmobile_boot_scu)
...@@ -36,7 +36,7 @@ ENTRY(shmobile_boot_scu) ...@@ -36,7 +36,7 @@ ENTRY(shmobile_boot_scu)
bic r2, r2, r3 @ Clear bits of our CPU (Run Mode) bic r2, r2, r3 @ Clear bits of our CPU (Run Mode)
str r2, [r0, #8] @ write back str r2, [r0, #8] @ write back
b shmobile_invalidate_start b secondary_startup
ENDPROC(shmobile_boot_scu) ENDPROC(shmobile_boot_scu)
.text .text
......
...@@ -16,13 +16,6 @@ ...@@ -16,13 +16,6 @@
#include <asm/assembler.h> #include <asm/assembler.h>
#include <asm/memory.h> #include <asm/memory.h>
#ifdef CONFIG_SMP
ENTRY(shmobile_invalidate_start)
bl v7_invalidate_l1
b secondary_startup
ENDPROC(shmobile_invalidate_start)
#endif
/* /*
* Reset vector for secondary CPUs. * Reset vector for secondary CPUs.
* This will be mapped at address 0 by SBAR register. * This will be mapped at address 0 by SBAR register.
......
...@@ -133,7 +133,7 @@ void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus, ...@@ -133,7 +133,7 @@ void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle) int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle)
{ {
/* For this particular CPU register boot vector */ /* For this particular CPU register boot vector */
shmobile_smp_hook(cpu, virt_to_phys(shmobile_invalidate_start), 0); shmobile_smp_hook(cpu, virt_to_phys(secondary_startup), 0);
return apmu_wrap(cpu, apmu_power_on); return apmu_wrap(cpu, apmu_power_on);
} }
......
...@@ -31,7 +31,6 @@ ...@@ -31,7 +31,6 @@
#define RSTMGR_MPUMODRST_CPU1 0x2 /* CPU1 Reset */ #define RSTMGR_MPUMODRST_CPU1 0x2 /* CPU1 Reset */
extern void socfpga_secondary_startup(void);
extern void __iomem *socfpga_scu_base_addr; extern void __iomem *socfpga_scu_base_addr;
extern void socfpga_init_clocks(void); extern void socfpga_init_clocks(void);
......
...@@ -30,8 +30,3 @@ ENTRY(secondary_trampoline) ...@@ -30,8 +30,3 @@ ENTRY(secondary_trampoline)
1: .long . 1: .long .
.long socfpga_cpu1start_addr .long socfpga_cpu1start_addr
ENTRY(secondary_trampoline_end) ENTRY(secondary_trampoline_end)
ENTRY(socfpga_secondary_startup)
bl v7_invalidate_l1
b secondary_startup
ENDPROC(socfpga_secondary_startup)
...@@ -40,7 +40,7 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) ...@@ -40,7 +40,7 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size); memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
writel(virt_to_phys(socfpga_secondary_startup), writel(virt_to_phys(secondary_startup),
sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff)); sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff));
flush_cache_all(); flush_cache_all();
......
...@@ -19,7 +19,7 @@ obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pm-tegra30.o ...@@ -19,7 +19,7 @@ obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pm-tegra30.o
ifeq ($(CONFIG_CPU_IDLE),y) ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o
endif endif
obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += sleep-tegra30.o obj-$(CONFIG_ARCH_TEGRA_114_SOC) += sleep-tegra30.o
......
#include <linux/linkage.h>
#include <linux/init.h>
#include "sleep.h"
.section ".text.head", "ax"
ENTRY(tegra_secondary_startup)
check_cpu_part_num 0xc09, r8, r9
bleq v7_invalidate_l1
b secondary_startup
ENDPROC(tegra_secondary_startup)
...@@ -94,7 +94,7 @@ void __init tegra_cpu_reset_handler_init(void) ...@@ -94,7 +94,7 @@ void __init tegra_cpu_reset_handler_init(void)
__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_PRESENT] = __tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_PRESENT] =
*((u32 *)cpu_possible_mask); *((u32 *)cpu_possible_mask);
__tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_SECONDARY] = __tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_SECONDARY] =
virt_to_phys((void *)tegra_secondary_startup); virt_to_phys((void *)secondary_startup);
#endif #endif
#ifdef CONFIG_PM_SLEEP #ifdef CONFIG_PM_SLEEP
......
...@@ -36,7 +36,6 @@ extern unsigned long __tegra_cpu_reset_handler_data[TEGRA_RESET_DATA_SIZE]; ...@@ -36,7 +36,6 @@ extern unsigned long __tegra_cpu_reset_handler_data[TEGRA_RESET_DATA_SIZE];
void __tegra_cpu_reset_handler_start(void); void __tegra_cpu_reset_handler_start(void);
void __tegra_cpu_reset_handler(void); void __tegra_cpu_reset_handler(void);
void __tegra_cpu_reset_handler_end(void); void __tegra_cpu_reset_handler_end(void);
void tegra_secondary_startup(void);
#ifdef CONFIG_PM_SLEEP #ifdef CONFIG_PM_SLEEP
#define tegra_cpu_lp1_mask \ #define tegra_cpu_lp1_mask \
......
...@@ -17,8 +17,6 @@ ...@@ -17,8 +17,6 @@
#ifndef __MACH_ZYNQ_COMMON_H__ #ifndef __MACH_ZYNQ_COMMON_H__
#define __MACH_ZYNQ_COMMON_H__ #define __MACH_ZYNQ_COMMON_H__
void zynq_secondary_startup(void);
extern int zynq_slcr_init(void); extern int zynq_slcr_init(void);
extern int zynq_early_slcr_init(void); extern int zynq_early_slcr_init(void);
extern void zynq_slcr_system_reset(void); extern void zynq_slcr_system_reset(void);
......
...@@ -22,8 +22,3 @@ zynq_secondary_trampoline_jump: ...@@ -22,8 +22,3 @@ zynq_secondary_trampoline_jump:
.globl zynq_secondary_trampoline_end .globl zynq_secondary_trampoline_end
zynq_secondary_trampoline_end: zynq_secondary_trampoline_end:
ENDPROC(zynq_secondary_trampoline) ENDPROC(zynq_secondary_trampoline)
ENTRY(zynq_secondary_startup)
bl v7_invalidate_l1
b secondary_startup
ENDPROC(zynq_secondary_startup)
...@@ -87,10 +87,9 @@ int zynq_cpun_start(u32 address, int cpu) ...@@ -87,10 +87,9 @@ int zynq_cpun_start(u32 address, int cpu)
} }
EXPORT_SYMBOL(zynq_cpun_start); EXPORT_SYMBOL(zynq_cpun_start);
static int zynq_boot_secondary(unsigned int cpu, static int zynq_boot_secondary(unsigned int cpu, struct task_struct *idle)
struct task_struct *idle)
{ {
return zynq_cpun_start(virt_to_phys(zynq_secondary_startup), cpu); return zynq_cpun_start(virt_to_phys(secondary_startup), cpu);
} }
/* /*
......
...@@ -336,7 +336,7 @@ __v7_pj4b_setup: ...@@ -336,7 +336,7 @@ __v7_pj4b_setup:
__v7_setup: __v7_setup:
adr r12, __v7_setup_stack @ the local stack adr r12, __v7_setup_stack @ the local stack
stmia r12, {r0-r5, r7, r9, r11, lr} stmia r12, {r0-r5, r7, r9, r11, lr}
bl v7_flush_dcache_louis bl v7_invalidate_l1
ldmia r12, {r0-r5, r7, r9, r11, lr} ldmia r12, {r0-r5, r7, r9, r11, lr}
mrc p15, 0, r0, c0, c0, 0 @ read main ID register mrc p15, 0, r0, c0, c0, 0 @ read main ID register
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment