Commit 02ebbbd4 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild

* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  scsi: drop unused Kconfig symbol
  pci: drop unused Kconfig symbol
  stmmac: drop unused Kconfig symbol
  x86: drop unused Kconfig symbol
  powerpc: drop unused Kconfig symbols
  powerpc: 40x: drop unused Kconfig symbol
  mips: drop unused Kconfig symbols
  openrisc: drop unused Kconfig symbols
  arm: at91: drop unused Kconfig symbol
  samples: drop unused Kconfig symbol
  m32r: drop unused Kconfig symbol
  score: drop unused Kconfig symbols
  sh: drop unused Kconfig symbol
  um: drop unused Kconfig symbol
  sparc: drop unused Kconfig symbol
  alpha: drop unused Kconfig symbol

Fix up trivial conflict in drivers/net/ethernet/stmicro/stmmac/Kconfig
as per Michal: the STMMAC_DUAL_MAC config variable is still unused and
should be deleted.
parents addd8c92 536ec4f8
......@@ -445,11 +445,6 @@ config ALPHA_EV67
Is this a machine based on the EV67 core? If in doubt, select N here
and the machine will be treated as an EV6.
config ALPHA_EV7
bool
depends on ALPHA_MARVEL
default y
config ALPHA_MCPCIA
bool
depends on ALPHA_RAWHIDE
......
......@@ -195,12 +195,6 @@ if ARCH_AT91SAM9260
comment "AT91SAM9260 Variants"
config ARCH_AT91SAM9260_SAM9XE
bool "AT91SAM9XE"
help
Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
They are basically AT91SAM9260s with various sizes of embedded Flash.
comment "AT91SAM9260 / AT91SAM9XE Board Type"
config MACH_AT91SAM9260EK
......
......@@ -323,13 +323,6 @@ config NODES_SHIFT
default "1"
depends on NEED_MULTIPLE_NODES
# turning this on wastes a bunch of space.
# Summit needs it only when NUMA is on
config BOOT_IOREMAP
bool
depends on NUMA
default n
endmenu
......
......@@ -820,10 +820,6 @@ config ARCH_HAS_ILOG2_U64
bool
default n
config ARCH_SUPPORTS_OPROFILE
bool
default y if !MIPS_MT_SMTC
config GENERIC_HWEIGHT
bool
default y
......@@ -2255,16 +2251,6 @@ config HZ
source "kernel/Kconfig.preempt"
config MIPS_INSANE_LARGE
bool "Support for large 64-bit configurations"
depends on CPU_R10000 && 64BIT
help
MIPS R10000 does support a 44 bit / 16TB address space as opposed to
previous 64-bit processors which only supported 40 bit / 1TB. If you
need processes of more than 1TB virtual address space, say Y here.
This will result in additional memory usage, so it is not
recommended for normal users.
config KEXEC
bool "Kexec system call (EXPERIMENTAL)"
depends on EXPERIMENTAL
......
source "arch/mips/powertv/asic/Kconfig"
config BOOTLOADER_DRIVER
bool "PowerTV Bootloader Driver Support"
default n
......
config MIN_RUNTIME_RESOURCES
bool "Support for minimum runtime resources"
default n
depends on POWERTV
help
Enables support for minimizing the number of (SA asic) runtime
resources that are preallocated by the kernel.
config MIN_RUNTIME_DOCSIS
bool "Support for minimum DOCSIS resource"
default y
depends on MIN_RUNTIME_RESOURCES
help
Enables support for the preallocated DOCSIS resource.
config MIN_RUNTIME_PMEM
bool "Support for minimum PMEM resource"
default y
depends on MIN_RUNTIME_RESOURCES
help
Enables support for the preallocated Memory resource.
config MIN_RUNTIME_TFTP
bool "Support for minimum TFTP resource"
default y
depends on MIN_RUNTIME_RESOURCES
help
Enables support for the preallocated TFTP resource.
......@@ -19,9 +19,6 @@ config OPENRISC
config MMU
def_bool y
config WISHBONE_BUS_BIG_ENDIAN
def_bool y
config SYMBOL_PREFIX
string
default ""
......@@ -160,15 +157,6 @@ config JUMP_UPON_UNHANDLED_EXCEPTION
Say Y if you are unsure.
config OPENRISC_EXCEPTION_DEBUG
bool "Print processor state at each exception"
default n
help
This option will make your kernel unusable for all but kernel
debugging.
Say N if you are unsure.
config OPENRISC_ESR_EXCEPTION_BUG_CHECK
bool "Check for possible ESR exception bug"
default n
......
......@@ -379,10 +379,6 @@ config PHYP_DUMP
If unsure, say "N"
config PPCBUG_NVRAM
bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
default y if PPC_PREP
config IRQ_ALL_CPUS
bool "Distribute interrupts on all CPUs by default"
depends on SMP && !MV64360
......@@ -745,24 +741,6 @@ config 8260_PCI9
depends on PCI_8260 && !8272
default y
choice
prompt "IDMA channel for PCI 9 workaround"
depends on 8260_PCI9
config 8260_PCI9_IDMA1
bool "IDMA1"
config 8260_PCI9_IDMA2
bool "IDMA2"
config 8260_PCI9_IDMA3
bool "IDMA3"
config 8260_PCI9_IDMA4
bool "IDMA4"
endchoice
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/Kconfig"
......
......@@ -107,11 +107,6 @@ config PPC40x_SIMPLE
help
This option enables the simple PowerPC 40x platform support.
# 40x specific CPU modules, selected based on the board above.
config NP405H
bool
#depends on ASH
# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
config 403GCX
bool
......
......@@ -284,14 +284,6 @@ config PPC_MMU_NOHASH
def_bool y
depends on !PPC_STD_MMU
config PPC_MMU_NOHASH_32
def_bool y
depends on PPC_MMU_NOHASH && PPC32
config PPC_MMU_NOHASH_64
def_bool y
depends on PPC_MMU_NOHASH && PPC64
config PPC_BOOK3E_MMU
def_bool y
depends on FSL_BOOKE || PPC_BOOK3E
......
......@@ -87,10 +87,6 @@ config MV64X60
config MPC10X_OPENPIC
bool
config MPC10X_STORE_GATHERING
bool "Enable MPC10x store gathering"
depends on MPC10X_BRIDGE
config GAMECUBE_COMMON
bool
......
......@@ -21,12 +21,3 @@ config PREP_RESIDUAL
or pass the 'noresidual' option to the kernel.
If you are running a PReP system, say Y here, otherwise say N.
config PROC_PREPRESIDUAL
bool "Support for reading of PReP Residual Data in /proc"
depends on PREP_RESIDUAL && PROC_FS
help
Enabling this option will create a /proc/residual file which allows
you to get at the residual data on PReP systems. You will need a tool
(lsresidual) to parse it. If you aren't on a PReP system, you don't
want this.
......@@ -24,8 +24,3 @@ endmenu
config PPC_A2_DD2
bool "Support for DD2 based A2/WSP systems"
depends on PPC_A2
config WORKAROUND_ERRATUM_463
depends on PPC_A2_DD2
bool "Workaround erratum 463"
default y
......@@ -52,16 +52,6 @@ config GENERIC_CALIBRATE_DELAY
config GENERIC_CLOCKEVENTS
def_bool y
config SCHED_NO_NO_OMIT_FRAME_POINTER
def_bool y
config GENERIC_SYSCALL_TABLE
def_bool y
config SCORE_L1_CACHE_SHIFT
int
default "4"
menu "Kernel type"
config 32BIT
......@@ -96,15 +86,6 @@ config STACKTRACE_SUPPORT
source "init/Kconfig"
config PROBE_INITRD_HEADER
bool "Probe initrd header created by addinitrd"
depends on BLK_DEV_INITRD
help
Probe initrd header at the last page of kernel image.
Say Y here if you are using arch/score/boot/addinitrd.c to
add initrd or initramfs image to the kernel image.
Otherwise, say N.
config MMU
def_bool y
......
......@@ -560,12 +560,7 @@ config SUN_OPENPROMFS
Only choose N if you know in advance that you will not need to modify
OpenPROM settings on the running system.
# Makefile helpers
config SPARC32_PCI
bool
default y
depends on SPARC32 && PCI
# Makefile helper
config SPARC64_PCI
bool
default y
......
......@@ -194,9 +194,6 @@ config NEED_PER_CPU_EMBED_FIRST_CHUNK
config NEED_PER_CPU_PAGE_FIRST_CHUNK
def_bool y
config HAVE_CPUMASK_OF_CPU_MAP
def_bool X86_64_SMP
config ARCH_HIBERNATION_POSSIBLE
def_bool y
......
......@@ -57,9 +57,6 @@ config ARCH_HAS_SC_SIGNALS
config ARCH_REUSE_HOST_VSYSCALL_AREA
def_bool !64BIT
config SMP_BROKEN
def_bool 64BIT
config GENERIC_HWEIGHT
def_bool y
......
......@@ -29,15 +29,6 @@ config STMMAC_DA
By default, the DMA arbitration scheme is based on Round-robin
(rx:tx priority is 1:1).
config STMMAC_DUAL_MAC
bool "STMMAC: dual mac support (EXPERIMENTAL)"
default n
depends on EXPERIMENTAL && STMMAC_ETH && !STMMAC_TIMER
---help---
Some ST SoCs (for example the stx7141 and stx7200c2) have two
Ethernet Controllers. This option turns on the second Ethernet
device on this kind of platforms.
config STMMAC_TIMER
bool "STMMAC Timer optimisation"
default n
......
......@@ -51,17 +51,6 @@ config XEN_PCIDEV_FRONTEND
The PCI device frontend driver allows the kernel to import arbitrary
PCI devices from a PCI backend to support PCI driver domains.
config XEN_PCIDEV_FE_DEBUG
bool "Xen PCI Frontend debugging"
depends on XEN_PCIDEV_FRONTEND && PCI_DEBUG
help
Say Y here if you want the Xen PCI frontend to produce a bunch of debug
messages to the system log. Select this if you are having a
problem with Xen PCI frontend support and want to see more of what is
going on.
When in doubt, say N.
config HT_IRQ
bool "Interrupts on hypertransport devices"
default y
......
......@@ -617,20 +617,6 @@ config SCSI_ARCMSR
To compile this driver as a module, choose M here: the
module will be called arcmsr (modprobe arcmsr).
config SCSI_ARCMSR_AER
bool "Enable PCI Error Recovery Capability in Areca Driver(ARCMSR)"
depends on SCSI_ARCMSR && PCIEAER
default n
help
The advanced error reporting(AER) capability is "NOT" provided by
ARC1200/1201/1202 SATA RAID controllers cards.
If your card is one of ARC1200/1201/1202, please use the default setting, n.
If your card is other models, you could pick it
on condition that the kernel version is greater than 2.6.19.
This function is maintained driver by Nick Cheng. If you have any
problems or suggestion, you are welcome to contact with <nick.cheng@areca.com.tw>.
To enable this function, choose Y here.
source "drivers/scsi/megaraid/Kconfig.megaraid"
source "drivers/scsi/mpt2sas/Kconfig"
......
......@@ -61,10 +61,4 @@ config SAMPLE_KDB
Build an example of how to dynamically add the hello
command to the kdb shell.
config SAMPLE_HIDRAW
bool "Build simple hidraw example"
depends on HIDRAW && HEADERS_CHECK
help
Build an example of how to use hidraw from userspace.
endif # SAMPLES
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment