dt-bindings: treewide: add access-controllers description

access-controllers is an optional property that allows a peripheral to
refer to one or more domain access controller(s).

Description of this property is added to all peripheral binding files of
the peripheral under the STM32 firewall controller. It allows an accurate
representation of the hardware, where various peripherals are connected
to a firewall bus. The firewall can then check the peripheral accesses
before allowing its device to probe.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml

@@ -46,6 +46,10 @@ properties:
   power-domains:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml

@@ -51,6 +51,10 @@ properties:
   power-domains:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/dma/st,stm32-dma.yaml

@@ -82,6 +82,10 @@ properties:
     description: if defined, it indicates that the controller
       supports memory-to-memory transfer
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml

@@ -28,6 +28,10 @@ properties:
   resets:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml

@@ -127,6 +127,10 @@ properties:
 
   wakeup-source: true
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml

@@ -93,6 +93,10 @@ properties:
   '#size-cells':
     const: 0
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 allOf:
   - if:
       properties:

Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml

@@ -59,6 +59,10 @@ properties:
       If not, SPI CLKOUT frequency will not be accurate.
     maximum: 20000000
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml

@@ -45,6 +45,10 @@ properties:
   '#size-cells':
     const: 0
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 additionalProperties: false
 
 required:

Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml

@@ -29,6 +29,10 @@ properties:
       - const: cec
       - const: hdmi-cec
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml

@@ -36,6 +36,10 @@ properties:
   resets:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
   port:
     $ref: /schemas/graph.yaml#/$defs/port-base
     unevaluatedProperties: false

Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml

@@ -50,6 +50,10 @@ properties:
       Reflects the memory layout with four integer values per bank. Format:
       <bank-number> 0 <address of the bank> <size>
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 patternProperties:
   "^.*@[0-4],[a-f0-9]+$":
     additionalProperties: true

Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml

@@ -44,6 +44,10 @@ properties:
 
   wakeup-source: true
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
   pwm:
     type: object
     additionalProperties: false

Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml

@@ -67,6 +67,10 @@ properties:
   "#size-cells":
     const: 0
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
   pwm:
     type: object
     additionalProperties: false

Documentation/devicetree/bindings/mmc/arm,pl18x.yaml

@@ -79,6 +79,10 @@ properties:
           - const: rx
           - const: tx
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
   power-domains: true
 
   resets:

Documentation/devicetree/bindings/net/can/bosch,m_can.yaml

@@ -118,6 +118,10 @@ properties:
   phys:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/net/stm32-dwmac.yaml

@@ -93,6 +93,10 @@ properties:
       select RCC clock instead of ETH_REF_CLK.
     type: boolean
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - clocks

Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml

@@ -55,6 +55,10 @@ properties:
     description: number of clock cells for ck_usbo_48m consumer
     const: 0
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 # Required child nodes:
 
 patternProperties:

Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml

@@ -30,6 +30,10 @@ properties:
   vdda-supply:
     description: phandle to the vdda input analog voltage.
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/rng/st,stm32-rng.yaml

@@ -37,6 +37,10 @@ properties:
     description: If set, the RNG configuration in RNG_CR, RNG_HTCR and
                   RNG_NSCR will be locked.
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/serial/st,stm32-uart.yaml

@@ -73,6 +73,10 @@ properties:
     enum: [1, 2, 4, 8, 12, 14, 16]
     default: 8
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 allOf:
   - $ref: rs485.yaml#
   - $ref: serial.yaml#

Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml

@@ -65,6 +65,10 @@ properties:
     $ref: audio-graph-port.yaml#
     unevaluatedProperties: false
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - "#sound-dai-cells"

Documentation/devicetree/bindings/sound/st,stm32-sai.yaml

@@ -48,6 +48,10 @@ properties:
   clock-names:
     maxItems: 3
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml

@@ -50,6 +50,10 @@ properties:
   resets:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - "#sound-dai-cells"

Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml

@@ -46,6 +46,10 @@ properties:
       - const: tx
       - const: rx
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/spi/st,stm32-spi.yaml

@@ -52,6 +52,10 @@ properties:
       - const: rx
       - const: tx
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/usb/dwc2.yaml

@@ -172,6 +172,10 @@ properties:
 
   tpl-support: true
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 dependencies:
   port: [ usb-role-switch ]
   role-switch-default-mode: [ usb-role-switch ]