i2c: piix4: Add support for AMD ML and CZ SMBus changes

The locations of SMBus register base address and enablement bit are changed
from AMD ML, which need this patch to be supported.
Signed-off-by: Shane Huang <shane.huang@amd.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@vger.kernel.org

Documentation/i2c/busses/i2c-piix4

@@ -13,7 +13,7 @@ Supported adapters:
   * AMD SP5100 (SB700 derivative found on some server mainboards)
     Datasheet: Publicly available at the AMD website
     http://support.amd.com/us/Embedded_TechDocs/44413.pdf
-  * AMD Hudson-2, CZ
+  * AMD Hudson-2, ML, CZ
     Datasheet: Not publicly available
   * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
     Datasheet: Publicly available at the SMSC website http://www.smsc.com

drivers/i2c/busses/Kconfig

@@ -152,6 +152,7 @@ config I2C_PIIX4
 	    ATI SB700/SP5100
 	    ATI SB800
 	    AMD Hudson-2
+	    AMD ML
 	    AMD CZ
 	    Serverworks OSB4
 	    Serverworks CSB5

drivers/i2c/busses/i2c-piix4.c

@@ -22,7 +22,7 @@
 	Intel PIIX4, 440MX
 	Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
 	ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800
-	AMD Hudson-2, CZ
+	AMD Hudson-2, ML, CZ
 	SMSC Victory66
 
    Note: we assume there can only be one device, with one or more
@@ -235,7 +235,8 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 {
 	unsigned short piix4_smba;
 	unsigned short smba_idx = 0xcd6;
-	u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en;
+	u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status;
+	u8 i2ccfg, i2ccfg_offset = 0x10;
 
 	/* SB800 and later SMBus does not support forcing address */
 	if (force || force_addr) {
@@ -245,7 +246,15 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 	}
 
 	/* Determine the address of the SMBus areas */
-	smb_en = (aux) ? 0x28 : 0x2c;
+	if ((PIIX4_dev->vendor == PCI_VENDOR_ID_AMD &&
+	     PIIX4_dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS &&
+	     PIIX4_dev->revision >= 0x41) ||
+	    (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD &&
+	     PIIX4_dev->device == 0x790b &&
+	     PIIX4_dev->revision >= 0x49))
+		smb_en = 0x00;
+	else
+		smb_en = (aux) ? 0x28 : 0x2c;
 
 	if (!request_region(smba_idx, 2, "smba_idx")) {
 		dev_err(&PIIX4_dev->dev, "SMBus base address index region "
@@ -258,13 +267,22 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 	smba_en_hi = inb_p(smba_idx + 1);
 	release_region(smba_idx, 2);
 
-	if ((smba_en_lo & 1) == 0) {
+	if (!smb_en) {
+		smb_en_status = smba_en_lo & 0x10;
+		piix4_smba = smba_en_hi << 8;
+		if (aux)
+			piix4_smba |= 0x20;
+	} else {
+		smb_en_status = smba_en_lo & 0x01;
+		piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
+	}
+
+	if (!smb_en_status) {
 		dev_err(&PIIX4_dev->dev,
 			"Host SMBus controller not enabled!\n");
 		return -ENODEV;
 	}
 
-	piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
 	if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
 		return -ENODEV;