powerpc: Pull common bits of setup_{32,64}.c into setup-common.c

This creates a new arch/powerpc/kernel/setup-common.c with various
bits that setup_32.c and setup_64.c had in common - functions like
machine_shutdown/restart/power_off, show_cpuinfo, set_preferred_console
etc.
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/powerpc/kernel/Makefile

@@ -32,7 +32,7 @@ extra-$(CONFIG_PPC_FPU)		+= fpu.o
 extra-y				+= vmlinux.lds
 
 obj-y				+= process.o init_task.o time.o \
-				   prom.o systbl.o traps.o
+				   prom.o systbl.o traps.o setup-common.o
 obj-$(CONFIG_PPC32)		+= entry_32.o idle_6xx.o setup_32.o misc_32.o
 obj-$(CONFIG_PPC64)		+= setup_64.o misc_64.o
 obj-$(CONFIG_PPC_OF)		+= prom_init.o

arch/powerpc/kernel/ppc_ksyms.c

@@ -14,7 +14,6 @@
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/ide.h>
-#include <linux/pm.h>
 #include <linux/bitops.h>
 
 #include <asm/page.h>
@@ -231,7 +230,6 @@ EXPORT_SYMBOL(screen_info);
 #endif
 
 #ifdef CONFIG_PPC32
-EXPORT_SYMBOL(pm_power_off);
 EXPORT_SYMBOL(__delay);
 EXPORT_SYMBOL(timer_interrupt);
 EXPORT_SYMBOL(irq_desc);

arch/powerpc/kernel/setup-common.c

+/*
+ * Common boot and setup code for both 32-bit and 64-bit.
+ * Extracted from arch/powerpc/kernel/setup_64.c.
+ *
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/delay.h>
+#include <linux/initrd.h>
+#include <linux/ide.h>
+#include <linux/seq_file.h>
+#include <linux/ioport.h>
+#include <linux/console.h>
+#include <linux/utsname.h>
+#include <linux/tty.h>
+#include <linux/root_dev.h>
+#include <linux/notifier.h>
+#include <linux/cpu.h>
+#include <linux/unistd.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/processor.h>
+#include <asm/pgtable.h>
+#include <asm/bootinfo.h>
+#include <asm/smp.h>
+#include <asm/elf.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/cputable.h>
+#include <asm/sections.h>
+#include <asm/btext.h>
+#include <asm/nvram.h>
+#include <asm/setup.h>
+#include <asm/system.h>
+#include <asm/rtas.h>
+#include <asm/iommu.h>
+#include <asm/serial.h>
+#include <asm/cache.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/lmb.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+/*
+ * This still seems to be needed... -- paulus
+ */ 
+struct screen_info screen_info = {
+	.orig_x = 0,
+	.orig_y = 25,
+	.orig_video_cols = 80,
+	.orig_video_lines = 25,
+	.orig_video_isVGA = 1,
+	.orig_video_points = 16
+};
+
+#ifdef __DO_IRQ_CANON
+/* XXX should go elsewhere eventually */
+int ppc_do_canonicalize_irqs;
+EXPORT_SYMBOL(ppc_do_canonicalize_irqs);
+#endif
+
+/* also used by kexec */
+void machine_shutdown(void)
+{
+	if (ppc_md.nvram_sync)
+		ppc_md.nvram_sync();
+}
+
+void machine_restart(char *cmd)
+{
+	machine_shutdown();
+	ppc_md.restart(cmd);
+#ifdef CONFIG_SMP
+	smp_send_stop();
+#endif
+	printk(KERN_EMERG "System Halted, OK to turn off power\n");
+	local_irq_disable();
+	while (1) ;
+}
+
+void machine_power_off(void)
+{
+	machine_shutdown();
+	ppc_md.power_off();
+#ifdef CONFIG_SMP
+	smp_send_stop();
+#endif
+	printk(KERN_EMERG "System Halted, OK to turn off power\n");
+	local_irq_disable();
+	while (1) ;
+}
+/* Used by the G5 thermal driver */
+EXPORT_SYMBOL_GPL(machine_power_off);
+
+void (*pm_power_off)(void) = machine_power_off;
+EXPORT_SYMBOL_GPL(pm_power_off);
+
+void machine_halt(void)
+{
+	machine_shutdown();
+	ppc_md.halt();
+#ifdef CONFIG_SMP
+	smp_send_stop();
+#endif
+	printk(KERN_EMERG "System Halted, OK to turn off power\n");
+	local_irq_disable();
+	while (1) ;
+}
+
+
+#ifdef CONFIG_TAU
+extern u32 cpu_temp(unsigned long cpu);
+extern u32 cpu_temp_both(unsigned long cpu);
+#endif /* CONFIG_TAU */
+
+#ifdef CONFIG_SMP
+DEFINE_PER_CPU(unsigned int, pvr);
+#endif
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	unsigned long cpu_id = (unsigned long)v - 1;
+	unsigned int pvr;
+	unsigned short maj;
+	unsigned short min;
+
+	if (cpu_id == NR_CPUS) {
+#if defined(CONFIG_SMP) && defined(CONFIG_PPC32)
+		unsigned long bogosum = 0;
+		int i;
+		for (i = 0; i < NR_CPUS; ++i)
+			if (cpu_online(i))
+				bogosum += loops_per_jiffy;
+		seq_printf(m, "total bogomips\t: %lu.%02lu\n",
+			   bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
+#endif /* CONFIG_SMP && CONFIG_PPC32 */
+		seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
+
+		if (ppc_md.show_cpuinfo != NULL)
+			ppc_md.show_cpuinfo(m);
+
+		return 0;
+	}
+
+	/* We only show online cpus: disable preempt (overzealous, I
+	 * knew) to prevent cpu going down. */
+	preempt_disable();
+	if (!cpu_online(cpu_id)) {
+		preempt_enable();
+		return 0;
+	}
+
+#ifdef CONFIG_SMP
+#ifdef CONFIG_PPC64	/* XXX for now */
+	pvr = per_cpu(pvr, cpu_id);
+#else
+	pvr = cpu_data[cpu_id].pvr;
+#endif
+#else
+	pvr = mfspr(SPRN_PVR);
+#endif
+	maj = (pvr >> 8) & 0xFF;
+	min = pvr & 0xFF;
+
+	seq_printf(m, "processor\t: %lu\n", cpu_id);
+	seq_printf(m, "cpu\t\t: ");
+
+	if (cur_cpu_spec->pvr_mask)
+		seq_printf(m, "%s", cur_cpu_spec->cpu_name);
+	else
+		seq_printf(m, "unknown (%08x)", pvr);
+
+#ifdef CONFIG_ALTIVEC
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		seq_printf(m, ", altivec supported");
+#endif /* CONFIG_ALTIVEC */
+
+	seq_printf(m, "\n");
+
+#ifdef CONFIG_TAU
+	if (cur_cpu_spec->cpu_features & CPU_FTR_TAU) {
+#ifdef CONFIG_TAU_AVERAGE
+		/* more straightforward, but potentially misleading */
+		seq_printf(m,  "temperature \t: %u C (uncalibrated)\n",
+			   cpu_temp(i));
+#else
+		/* show the actual temp sensor range */
+		u32 temp;
+		temp = cpu_temp_both(i);
+		seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n",
+			   temp & 0xff, temp >> 16);
+#endif
+	}
+#endif /* CONFIG_TAU */
+
+	/*
+	 * Assume here that all clock rates are the same in a
+	 * smp system.  -- Cort
+	 */
+	if (ppc_proc_freq)
+		seq_printf(m, "clock\t\t: %lu.%06luMHz\n",
+			   ppc_proc_freq / 1000000, ppc_proc_freq % 1000000);
+
+	if (ppc_md.show_percpuinfo != NULL)
+		ppc_md.show_percpuinfo(m, cpu_id);
+
+	/* If we are a Freescale core do a simple check so
+	 * we dont have to keep adding cases in the future */
+	if (PVR_VER(pvr) & 0x8000) {
+		maj = PVR_MAJ(pvr);
+		min = PVR_MIN(pvr);
+	} else {
+		switch (PVR_VER(pvr)) {
+			case 0x0020:	/* 403 family */
+				maj = PVR_MAJ(pvr) + 1;
+				min = PVR_MIN(pvr);
+				break;
+			case 0x1008:	/* 740P/750P ?? */
+				maj = ((pvr >> 8) & 0xFF) - 1;
+				min = pvr & 0xFF;
+				break;
+			default:
+				maj = (pvr >> 8) & 0xFF;
+				min = pvr & 0xFF;
+				break;
+		}
+	}
+
+	seq_printf(m, "revision\t: %hd.%hd (pvr %04x %04x)\n",
+		   maj, min, PVR_VER(pvr), PVR_REV(pvr));
+
+#ifdef CONFIG_PPC32
+	seq_printf(m, "bogomips\t: %lu.%02lu\n",
+		   loops_per_jiffy / (500000/HZ),
+		   (loops_per_jiffy / (5000/HZ)) % 100);
+#endif
+
+#ifdef CONFIG_SMP
+	seq_printf(m, "\n");
+#endif
+
+	preempt_enable();
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	unsigned long i = *pos;
+
+	return i <= NR_CPUS ? (void *)(i + 1) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+struct seq_operations cpuinfo_op = {
+	.start =c_start,
+	.next =	c_next,
+	.stop =	c_stop,
+	.show =	show_cpuinfo,
+};
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+static int __init set_preferred_console(void)
+{
+	struct device_node *prom_stdout = NULL;
+	char *name;
+	u32 *spd;
+	int offset = 0;
+
+	DBG(" -> set_preferred_console()\n");
+
+	/* The user has requested a console so this is already set up. */
+	if (strstr(saved_command_line, "console=")) {
+		DBG(" console was specified !\n");
+		return -EBUSY;
+	}
+
+	if (!of_chosen) {
+		DBG(" of_chosen is NULL !\n");
+		return -ENODEV;
+	}
+	/* We are getting a weird phandle from OF ... */
+	/* ... So use the full path instead */
+	name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
+	if (name == NULL) {
+		DBG(" no linux,stdout-path !\n");
+		return -ENODEV;
+	}
+	prom_stdout = of_find_node_by_path(name);
+	if (!prom_stdout) {
+		DBG(" can't find stdout package %s !\n", name);
+		return -ENODEV;
+	}	
+	DBG("stdout is %s\n", prom_stdout->full_name);
+
+	name = (char *)get_property(prom_stdout, "name", NULL);
+	if (!name) {
+		DBG(" stdout package has no name !\n");
+		goto not_found;
+	}
+	spd = (u32 *)get_property(prom_stdout, "current-speed", NULL);
+
+	if (0)
+		;
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	else if (strcmp(name, "serial") == 0) {
+		int i;
+		u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
+		if (i > 8) {
+			switch (reg[1]) {
+				case 0x3f8:
+					offset = 0;
+					break;
+				case 0x2f8:
+					offset = 1;
+					break;
+				case 0x898:
+					offset = 2;
+					break;
+				case 0x890:
+					offset = 3;
+					break;
+				default:
+					/* We dont recognise the serial port */
+					goto not_found;
+			}
+		}
+	}
+#endif /* CONFIG_SERIAL_8250_CONSOLE */
+#ifdef CONFIG_PPC_PSERIES
+	else if (strcmp(name, "vty") == 0) {
+ 		u32 *reg = (u32 *)get_property(prom_stdout, "reg", NULL);
+ 		char *compat = (char *)get_property(prom_stdout, "compatible", NULL);
+
+ 		if (reg && compat && (strcmp(compat, "hvterm-protocol") == 0)) {
+ 			/* Host Virtual Serial Interface */
+ 			int offset;
+ 			switch (reg[0]) {
+ 				case 0x30000000:
+ 					offset = 0;
+ 					break;
+ 				case 0x30000001:
+ 					offset = 1;
+ 					break;
+ 				default:
+					goto not_found;
+ 			}
+			of_node_put(prom_stdout);
+			DBG("Found hvsi console at offset %d\n", offset);
+ 			return add_preferred_console("hvsi", offset, NULL);
+ 		} else {
+ 			/* pSeries LPAR virtual console */
+			of_node_put(prom_stdout);
+			DBG("Found hvc console\n");
+ 			return add_preferred_console("hvc", 0, NULL);
+ 		}
+	}
+#endif /* CONFIG_PPC_PSERIES */
+#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
+	else if (strcmp(name, "ch-a") == 0)
+		offset = 0;
+	else if (strcmp(name, "ch-b") == 0)
+		offset = 1;
+#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
+	else
+		goto not_found;
+	of_node_put(prom_stdout);
+
+	DBG("Found serial console at ttyS%d\n", offset);
+
+	if (spd) {
+		static char __initdata opt[16];
+		sprintf(opt, "%d", *spd);
+		return add_preferred_console("ttyS", offset, opt);
+	} else
+		return add_preferred_console("ttyS", offset, NULL);
+
+ not_found:
+	DBG("No preferred console found !\n");
+	of_node_put(prom_stdout);
+	return -ENODEV;
+}
+console_initcall(set_preferred_console);
+#endif /* CONFIG_PPC_MULTIPLATFORM */

arch/powerpc/kernel/setup_32.c

@@ -41,6 +41,8 @@
 #include <asm/xmon.h>
 #include <asm/time.h>
 
+#define DBG(fmt...)
+
 #if defined CONFIG_KGDB
 #include <asm/kgdb.h>
 #endif
@@ -108,168 +110,6 @@ struct screen_info screen_info = {
 };
 #endif /* CONFIG_VGA_CONSOLE || CONFIG_FB_VGA16 || CONFIG_FB_VESA */
 
-void machine_restart(char *cmd)
-{
-#ifdef CONFIG_NVRAM
-	nvram_sync();
-#endif
-	ppc_md.restart(cmd);
-}
-
-void machine_power_off(void)
-{
-#ifdef CONFIG_NVRAM
-	nvram_sync();
-#endif
-	ppc_md.power_off();
-}
-
-void machine_halt(void)
-{
-#ifdef CONFIG_NVRAM
-	nvram_sync();
-#endif
-	ppc_md.halt();
-}
-
-void (*pm_power_off)(void) = machine_power_off;
-
-#ifdef CONFIG_TAU
-extern u32 cpu_temp(unsigned long cpu);
-extern u32 cpu_temp_both(unsigned long cpu);
-#endif /* CONFIG_TAU */
-
-int show_cpuinfo(struct seq_file *m, void *v)
-{
-	int i = (int) v - 1;
-	unsigned int pvr;
-	unsigned short maj, min;
-	unsigned long lpj;
-
-	if (i >= NR_CPUS) {
-		/* Show summary information */
-#ifdef CONFIG_SMP
-		unsigned long bogosum = 0;
-		for (i = 0; i < NR_CPUS; ++i)
-			if (cpu_online(i))
-				bogosum += cpu_data[i].loops_per_jiffy;
-		seq_printf(m, "total bogomips\t: %lu.%02lu\n",
-			   bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
-#endif /* CONFIG_SMP */
-
-		if (ppc_md.show_cpuinfo != NULL)
-			ppc_md.show_cpuinfo(m);
-		return 0;
-	}
-
-#ifdef CONFIG_SMP
-	if (!cpu_online(i))
-		return 0;
-	pvr = cpu_data[i].pvr;
-	lpj = cpu_data[i].loops_per_jiffy;
-#else
-	pvr = mfspr(SPRN_PVR);
-	lpj = loops_per_jiffy;
-#endif
-
-	seq_printf(m, "processor\t: %d\n", i);
-	seq_printf(m, "cpu\t\t: ");
-
-	if (cur_cpu_spec->pvr_mask)
-		seq_printf(m, "%s", cur_cpu_spec->cpu_name);
-	else
-		seq_printf(m, "unknown (%08x)", pvr);
-#ifdef CONFIG_ALTIVEC
-	if (cur_cpu_spec->cpu_features & CPU_FTR_ALTIVEC)
-		seq_printf(m, ", altivec supported");
-#endif
-	seq_printf(m, "\n");
-
-#ifdef CONFIG_TAU
-	if (cur_cpu_spec->cpu_features & CPU_FTR_TAU) {
-#ifdef CONFIG_TAU_AVERAGE
-		/* more straightforward, but potentially misleading */
-		seq_printf(m,  "temperature \t: %u C (uncalibrated)\n",
-			   cpu_temp(i));
-#else
-		/* show the actual temp sensor range */
-		u32 temp;
-		temp = cpu_temp_both(i);
-		seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n",
-			   temp & 0xff, temp >> 16);
-#endif
-	}
-#endif /* CONFIG_TAU */
-
-	if (ppc_md.show_percpuinfo != NULL)
-		ppc_md.show_percpuinfo(m, i);
-
-	/* If we are a Freescale core do a simple check so
-	 * we dont have to keep adding cases in the future */
-	if (PVR_VER(pvr) & 0x8000) {
-		maj = PVR_MAJ(pvr);
-		min = PVR_MIN(pvr);
-	} else {
-		switch (PVR_VER(pvr)) {
-			case 0x0020:	/* 403 family */
-				maj = PVR_MAJ(pvr) + 1;
-				min = PVR_MIN(pvr);
-				break;
-			case 0x1008:	/* 740P/750P ?? */
-				maj = ((pvr >> 8) & 0xFF) - 1;
-				min = pvr & 0xFF;
-				break;
-			default:
-				maj = (pvr >> 8) & 0xFF;
-				min = pvr & 0xFF;
-				break;
-		}
-	}
-
-	/*
-	 * Assume here that all clock rates are the same in a
-	 * smp system.  -- Cort
-	 */
-	seq_printf(m, "clock\t\t: %lu.%06luMHz\n", ppc_proc_freq / 1000000,
-		   ppc_proc_freq % 1000000);
-
-	seq_printf(m, "revision\t: %hd.%hd (pvr %04x %04x)\n",
-		   maj, min, PVR_VER(pvr), PVR_REV(pvr));
-
-	seq_printf(m, "bogomips\t: %lu.%02lu\n",
-		   lpj / (500000/HZ), (lpj / (5000/HZ)) % 100);
-
-#ifdef CONFIG_SMP
-	seq_printf(m, "\n");
-#endif
-
-	return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
-	int i = *pos;
-
-	return i <= NR_CPUS? (void *) (i + 1): NULL;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return c_start(m, pos);
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-struct seq_operations cpuinfo_op = {
-	.start =c_start,
-	.next =	c_next,
-	.stop =	c_stop,
-	.show =	show_cpuinfo,
-};
-
 /*
  * We're called here very early in the boot.  We determine the machine
  * type and call the appropriate low-level setup functions.
@@ -297,30 +137,6 @@ unsigned long __init early_init(unsigned long dt_ptr)
 	return KERNELBASE + offset;
 }
 
-#ifdef CONFIG_PPC_OF
-void __init
-intuit_machine_type(void)
-{
-	char *model;
-	struct device_node *root;
-	
-	/* ask the OF info if we're a chrp or pmac */
-	root = find_path_device("/");
-	if (root != 0) {
-		/* assume pmac unless proven to be chrp -- Cort */
-		_machine = _MACH_Pmac;
-		model = get_property(root, "device_type", NULL);
-		if (model && !strncmp("chrp", model, 4))
-			_machine = _MACH_chrp;
-		else {
-			model = get_property(root, "model", NULL);
-			if (model && !strncmp(model, "IBM", 3))
-				_machine = _MACH_chrp;
-		}
-	}
-}
-#endif
-
 #ifdef CONFIG_PPC_MULTIPLATFORM
 /*
  * The PPC_MULTIPLATFORM version of platform_init...
@@ -362,64 +178,7 @@ void __init platform_init(void)
 #endif
 	}
 }
-
-#ifdef CONFIG_SERIAL_CORE_CONSOLE
-extern char *of_stdout_device;
-
-static int __init set_preferred_console(void)
-{
-	struct device_node *prom_stdout;
-	char *name;
-	int offset = 0;
-
-	if (of_stdout_device == NULL)
-		return -ENODEV;
-
-	/* The user has requested a console so this is already set up. */
-	if (strstr(saved_command_line, "console="))
-		return -EBUSY;
-
-	prom_stdout = find_path_device(of_stdout_device);
-	if (!prom_stdout)
-		return -ENODEV;
-
-	name = (char *)get_property(prom_stdout, "name", NULL);
-	if (!name)
-		return -ENODEV;
-
-	if (strcmp(name, "serial") == 0) {
-		int i;
-		u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
-		if (i > 8) {
-			switch (reg[1]) {
-				case 0x3f8:
-					offset = 0;
-					break;
-				case 0x2f8:
-					offset = 1;
-					break;
-				case 0x898:
-					offset = 2;
-					break;
-				case 0x890:
-					offset = 3;
-					break;
-				default:
-					/* We dont recognise the serial port */
-					return -ENODEV;
-			}
-		}
-	} else if (strcmp(name, "ch-a") == 0)
-		offset = 0;
-	else if (strcmp(name, "ch-b") == 0)
-		offset = 1;
-	else
-		return -ENODEV;
-	return add_preferred_console("ttyS", offset, NULL);
-}
-console_initcall(set_preferred_console);
-#endif /* CONFIG_SERIAL_CORE_CONSOLE */
-#endif /* CONFIG_PPC_MULTIPLATFORM */
+#endif
 
 /*
  * Find out what kind of machine we're on and save any data we need
@@ -545,7 +304,7 @@ void __init setup_arch(char **cmdline_p)
 	init_boot_display();
 #endif
 
-#ifdef CONFIG_PPC_MULTIPLATFORM
+#ifdef CONFIG_PPC_PMAC
 	/* This could be called "early setup arch", it must be done
 	 * now because xmon need it
 	 */