Merge tag 'dt-3.13-2' of git://git.infradead.org/linux-mvebu into next/dt

From Jason Cooper:
mvebu dt changes for v3.13 (round 2)

 - kirkwood
    - use MBus DT binding for setting up the windows
    - move crypto and nand underneath the mbus node
    - ib62x0 has a u-boot env partition

 - mvebu
    - add the Armada XP matrix board

* tag 'dt-3.13-2' of git://git.infradead.org/linux-mvebu:
  arm: mvebu: add support for the Armada XP Matrix board
  ARM: kirkwood: ib62x0: add u-boot environment partition
  ARM: kirkwood: Move the nand node under the mbus node
  ARM: kirkwood: Move the crypto node under the mbus node
  ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding
Signed-off-by: Kevin Hilman <khilman@linaro.org>

arch/arm/boot/dts/Makefile

@@ -111,6 +111,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
 	armada-xp-axpwifiap.dtb \
 	armada-xp-db.dtb \
 	armada-xp-gp.dtb \
+	armada-xp-matrix.dtb \
 	armada-xp-openblocks-ax3-4.dtb
 dtb-$(CONFIG_ARCH_MXC) += \
 	imx25-karo-tx25.dtb \

arch/arm/boot/dts/armada-xp-matrix.dts

+/*
+ * Device Tree file for Marvell Armada XP Matrix board
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-xp-mv78460.dtsi"
+
+/ {
+	model = "Marvell Armada XP Matrix Board";
+	compatible = "marvell,axp-matrix", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12100 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12200 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12300 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy-mode = "sgmii";
+			};
+
+			pcie-controller {
+				status = "okay";
+
+				pcie@1,0 {
+					/* Port 0, Lane 0 */
+					status = "okay";
+				};
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/kirkwood-db-88f6281.dts

@@ -19,7 +19,6 @@ / {
 	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
 	mbus {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
 		pcie-controller {
 			status = "okay";
 

arch/arm/boot/dts/kirkwood-db-88f6282.dts

@@ -19,7 +19,6 @@ / {
 	compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
 
 	mbus {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
 		pcie-controller {
 			status = "okay";
 

arch/arm/boot/dts/kirkwood-db.dtsi

@@ -39,7 +39,26 @@ serial@12000 {
 			status = "ok";
 		};
 
-		nand@3000000 {
+		sata@80000 {
+			nr-ports = <2>;
+			status = "okay";
+		};
+
+		ehci@50000 {
+			status = "okay";
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio_gpios>;
+			pinctrl-names = "default";
+			wp-gpios = <&gpio1 5 0>;
+			cd-gpios = <&gpio1 6 0>;
+			status = "okay";
+		};
+	};
+};
+
+&nand {
 	pinctrl-0 = <&pmx_nand>;
 	pinctrl-names = "default";
 	chip-delay = <25>;
@@ -59,25 +78,6 @@ partition@500000 {
 		label = "root";
 		reg = <0x500000 0x1fb00000>;
 	};
-		};
-
-		sata@80000 {
-			nr-ports = <2>;
-			status = "okay";
-		};
-
-		ehci@50000 {
-			status = "okay";
-		};
-
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio_gpios>;
-			pinctrl-names = "default";
-			wp-gpios = <&gpio1 5 0>;
-			cd-gpios = <&gpio1 6 0>;
-			status = "okay";
-		};
-	};
 };
 
 &mdio {

arch/arm/boot/dts/kirkwood-dnskw.dtsi

@@ -148,8 +148,41 @@ sata@80000 {
 			status = "okay";
 			nr-ports = <2>;
 		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 7 0>;
+		};
+		sata1_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 8 0>;
+		};
+	};
+};
 
-		nand@3000000 {
+&nand {
 	pinctrl-0 = <&pmx_nand>;
 	pinctrl-names = "default";
 	status = "okay";
@@ -185,39 +218,6 @@ partition@7b00000 {
 		label = "config";
 		reg = <0x7b00000 0x500000>;
 	};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
-		pinctrl-names = "default";
-
-		sata0_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 7 0>;
-		};
-		sata1_power: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 8 0>;
-		};
-	};
 };
 
 &mdio {

arch/arm/boot/dts/kirkwood-dockstar.dts

@@ -34,26 +34,6 @@ pmx_led_orange: pmx-led-orange {
 		serial@12000 {
 			status = "ok";
 		};
-
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x400000>;
-			};
-
-			partition@500000 {
-				label = "data";
-				reg = <0x0500000 0xfb00000>;
-			};
-		};
 	};
 	gpio-leds {
 		compatible = "gpio-leds";
@@ -91,6 +71,26 @@ usb_power: regulator@1 {
 	};
 };
 
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "data";
+		reg = <0x0500000 0xfb00000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 

arch/arm/boot/dts/kirkwood-goflexnet.dts

@@ -67,31 +67,6 @@ serial@12000 {
 			status = "ok";
 		};
 
-		nand@3000000 {
-			chip-delay = <40>;
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x400000>;
-			};
-
-			partition@500000 {
-				label = "pogoplug";
-				reg = <0x0500000 0x2000000>;
-			};
-
-			partition@2500000 {
-				label = "root";
-				reg = <0x02500000 0xd800000>;
-			};
-		};
 		sata@80000 {
 			status = "okay";
 			nr-ports = <2>;
@@ -171,6 +146,32 @@ usb_power: regulator@1 {
 	};
 };
 
+&nand {
+	chip-delay = <40>;
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "pogoplug";
+		reg = <0x0500000 0x2000000>;
+	};
+
+	partition@2500000 {
+		label = "root";
+		reg = <0x02500000 0xd800000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 

arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts

@@ -40,26 +40,6 @@ serial@12000 {
 			status = "ok";
 		};
 
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x00000000 0x00100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x00100000 0x00400000>;
-			};
-
-			partition@500000 {
-				label = "data";
-				reg = <0x00500000 0x1fb00000>;
-			};
-		};
-
 		sata@80000 {
 			status = "okay";
 			nr-ports = <1>;
@@ -97,6 +77,26 @@ wmode-g {
 	};
 };
 
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x00000000 0x00100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x00100000 0x00400000>;
+	};
+
+	partition@500000 {
+		label = "data";
+		reg = <0x00500000 0x1fb00000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 

arch/arm/boot/dts/kirkwood-ib62x0.dts

@@ -43,6 +43,7 @@ pmx_button_usb_copy: pmx-button-usb-copy {
 				marvell,function = "gpio";
 			};
 		};
+
 		serial@12000 {
 			status = "okay";
 		};
@@ -51,28 +52,6 @@ sata@80000 {
 			status = "okay";
 			nr-ports = <2>;
 		};
-
-		nand@3000000 {
-			status = "okay";
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x600000>;
-			};
-
-			partition@700000 {
-				label = "root";
-				reg = <0x0700000 0xf900000>;
-			};
-
-		};
 	};
 
 	gpio_keys {
@@ -93,6 +72,7 @@ button@2 {
 			gpios = <&gpio0 28 1>;
 		};
 	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green
@@ -113,13 +93,39 @@ usb-copy {
 			gpios = <&gpio0 27 0>;
 		};
 	};
+
 	gpio_poweroff {
 		compatible = "gpio-poweroff";
 		pinctrl-0 = <&pmx_power_off>;
 		pinctrl-names = "default";
 		gpios = <&gpio0 24 0>;
 	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0xe0000>;
+	};
+
+	partition@e0000 {
+		label = "u-boot environment";
+		reg = <0xe0000 0x100000>;
+	};
 
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x600000>;
+	};
+
+	partition@700000 {
+		label = "root";
+		reg = <0x0700000 0xf900000>;
+	};
 
 };
 
@@ -134,6 +140,7 @@ ethphy0: ethernet-phy@8 {
 
 &eth0 {
 	status = "okay";
+
 	ethernet0-port@0 {
 		phy-handle = <&ethphy0>;
 	};

arch/arm/boot/dts/kirkwood-iconnect.dts

@@ -19,7 +19,6 @@ chosen {
 	};
 
 	mbus {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
 		pcie-controller {
 			status = "okay";
 
@@ -83,35 +82,6 @@ lm63: lm63@4c {
 		serial@12000 {
 			status = "ok";
 		};
-
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0000000 0xc0000>;
-			};
-
-			partition@a0000 {
-				label = "env";
-				reg = <0xa0000 0x20000>;
-			};
-
-			partition@100000 {
-				label = "zImage";
-				reg = <0x100000 0x300000>;
-			};
-
-			partition@540000 {
-				label = "initrd";
-				reg = <0x540000 0x300000>;
-			};
-
-			partition@980000 {
-				label = "boot";
-				reg = <0x980000 0x1f400000>;
-			};
-		};
 	};
 
 	gpio-leds {
@@ -180,6 +150,35 @@ button@2 {
 	};
 };
 
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0xc0000>;
+	};
+
+	partition@a0000 {
+		label = "env";
+		reg = <0xa0000 0x20000>;
+	};
+
+	partition@100000 {
+		label = "zImage";
+		reg = <0x100000 0x300000>;
+	};
+
+	partition@540000 {
+		label = "initrd";
+		reg = <0x540000 0x300000>;
+	};
+
+	partition@980000 {
+		label = "boot";
+		reg = <0x980000 0x1f400000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 

arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts

@@ -113,31 +113,6 @@ serial@12000 {
 			status = "ok";
 		};
 
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@a0000 {
-				label = "env";
-				reg = <0xa0000 0x20000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x100000 0x300000>;
-			};
-
-			partition@400000 {
-				label = "uInitrd";
-				reg = <0x540000 0x1000000>;
-			};
-		};
 		sata@80000 {
 			status = "okay";
 			nr-ports = <2>;
@@ -195,6 +170,32 @@ OTB {
 	};
 };
 
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@a0000 {
+		label = "env";
+		reg = <0xa0000 0x20000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x300000>;
+	};
+
+	partition@400000 {
+		label = "uInitrd";
+		reg = <0x540000 0x1000000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 

arch/arm/boot/dts/kirkwood-km_kirkwood.dts

@@ -34,13 +34,6 @@ pmx_i2c_gpio_scl: pmx-gpio-scl {
 		serial@12000 {
 			status = "ok";
 		};
-
-		nand@3000000 {
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-			status = "ok";
-			chip-delay = <25>;
-		};
 	};
 
 	i2c@0 {
@@ -51,6 +44,13 @@ i2c@0 {
 	};
 };
 
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	status = "ok";
+	chip-delay = <25>;
+};
+
 &mdio {
 	status = "okay";
 

arch/arm/boot/dts/kirkwood-mplcec4.dts

@@ -17,7 +17,6 @@ chosen {
         };
 
 	mbus {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
 		pcie-controller {
 			status = "okay";
 
@@ -96,37 +95,6 @@ serial@12000 {
                         pinctrl-names = "default";
                 };
 
-                nand@3000000 {
-                        pinctrl-0 = <&pmx_nand>;
-                        pinctrl-names = "default";
-                        status = "okay";
-
-                        partition@0 {
-                                label = "uboot";
-                                reg = <0x0000000 0x100000>;
-                        };
-
-                        partition@100000 {
-                                label = "env";
-                                reg = <0x100000 0x80000>;
-                        };
-
-                        partition@180000 {
-                                label = "fdt";
-                                reg = <0x180000 0x80000>;
-                        };
-
-                        partition@200000 {
-                                label = "kernel";
-                                reg = <0x200000 0x400000>;
-                        };
-
-                        partition@600000 {
-                                label = "rootfs";
-                                reg = <0x600000 0x1fa00000>;
-                        };
-                };
-
 		rtc@10300 {
 			status = "disabled";
 		};
@@ -194,6 +162,37 @@ misc {
 	};
 };
 
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "env";
+		reg = <0x100000 0x80000>;
+	};
+
+	partition@180000 {
+		label = "fdt";
+		reg = <0x180000 0x80000>;
+	};
+
+	partition@200000 {
+		label = "kernel";
+		reg = <0x200000 0x400000>;
+	};
+
+	partition@600000 {
+		label = "rootfs";
+		reg = <0x600000 0x1fa00000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 

arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts

@@ -17,7 +17,6 @@ chosen {
 	};
 
 	mbus {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
 		pcie-controller {
 			status = "okay";
 
@@ -98,36 +97,6 @@ serial@12000 {
 			status = "okay";
 		};
 
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x180000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "u-boot-env";
-				reg = <0x180000 0x20000>;
-			};
-
-			partition@200000 {
-				label = "uImage";
-				reg = <0x0200000 0x600000>;
-			};
-
-			partition@800000 {
-				label = "minirootfs";
-				reg = <0x0800000 0x1000000>;
-			};
-
-			partition@1800000 {
-				label = "jffs2";
-				reg = <0x1800000 0x6800000>;
-			};
-		};
-
 		sata@80000 {
 			status = "okay";
 			nr-ports = <2>;
@@ -208,6 +177,36 @@ usb_power: regulator@1 {
         };
 };
 
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x180000>;
+		read-only;
+	};
+
+	partition@180000 {
+		label = "u-boot-env";
+		reg = <0x180000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "uImage";
+		reg = <0x0200000 0x600000>;
+	};
+
+	partition@800000 {
+		label = "minirootfs";
+		reg = <0x0800000 0x1000000>;
+	};
+
+	partition@1800000 {
+		label = "jffs2";
+		reg = <0x1800000 0x6800000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 

arch/arm/boot/dts/kirkwood-nsa310-common.dtsi

@@ -27,7 +27,43 @@ sata@80000 {
 			nr-ports = <2>;
 		};
 
-		nand@3000000 {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_pwr_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 16 0>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_off>;
+		pinctrl-names = "default";
+
+		usb0_power_off: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power Off";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 21 0>;
+		};
+	};
+};
+
+&nand {
 	status = "okay";
 	chip-delay = <35>;
 
@@ -68,40 +104,4 @@ partition@5040000 {
 		label = "rootfs2";
 		reg = <0x5040000 0x2fc0000>;
 	};
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_pwr_off>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 16 0>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_off>;
-		pinctrl-names = "default";
-
-		usb0_power_off: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power Off";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 21 0>;
-		};
-	};
 };

arch/arm/boot/dts/kirkwood-nsa310.dts

@@ -15,7 +15,6 @@ chosen {
 	};
 
 	mbus {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
 		pcie-controller {
 			status = "okay";
 

arch/arm/boot/dts/kirkwood-openblocks_a6.dts

@@ -29,43 +29,6 @@ serial@12100 {
 			pinctrl-names = "default";
 		};
 
-		nand@3000000 {
-			chip-delay = <25>;
-			status = "okay";
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0 0x90000>;
-			};
-
-			partition@90000 {
-				label = "env";
-				reg = <0x90000 0x44000>;
-			};
-
-			partition@d4000 {
-				label = "test";
-				reg = <0xd4000 0x24000>;
-			};
-
-			partition@f4000 {
-				label = "conf";
-				reg = <0xf4000 0x400000>;
-			};
-
-			partition@4f4000 {
-				label = "linux";
-				reg = <0x4f4000 0x1d20000>;
-			};
-
-			partition@2214000 {
-				label = "user";
-				reg = <0x2214000 0x1dec000>;
-			};
-		};
-
 		sata@80000 {
 			nr-ports = <1>;
 			status = "okay";
@@ -167,6 +130,43 @@ button@1 {
 	};
 };
 
+&nand {
+	chip-delay = <25>;
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x90000>;
+	};
+
+	partition@90000 {
+		label = "env";
+		reg = <0x90000 0x44000>;
+	};
+
+	partition@d4000 {
+		label = "test";
+		reg = <0xd4000 0x24000>;
+	};
+
+	partition@f4000 {
+		label = "conf";
+		reg = <0xf4000 0x400000>;
+	};
+
+	partition@4f4000 {
+		label = "linux";
+		reg = <0x4f4000 0x1d20000>;
+	};
+
+	partition@2214000 {
+		label = "user";
+		reg = <0x2214000 0x1dec000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 

arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi

@@ -48,27 +48,6 @@ serial@12000 {
 			pinctrl-names = "default";
 			status = "okay";
 		};
-
-		nand@3000000 {
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x400000>;
-			};
-
-			partition@500000 {
-				label = "root";
-				reg = <0x0500000 0x1fb00000>;
-			};
-		};
 	};
 
 	regulators {
@@ -92,6 +71,27 @@ usb_power: regulator@1 {
 	};
 };
 
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "root";
+		reg = <0x0500000 0x1fb00000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 

arch/arm/boot/dts/kirkwood-topkick.dts

@@ -90,37 +90,6 @@ serial@12000 {
 			pinctrl-names = "default";
 		};
 
-		nand@3000000 {
-			status = "okay";
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x180000>;
-			};
-
-			partition@180000 {
-				label = "u-boot env";
-				reg = <0x0180000 0x20000>;
-			};
-
-			partition@200000 {
-				label = "uImage";
-				reg = <0x0200000 0x600000>;
-			};
-
-			partition@800000 {
-				label = "uInitrd";
-				reg = <0x0800000 0x1000000>;
-			};
-
-			partition@1800000 {
-				label = "rootfs";
-				reg = <0x1800000 0xe800000>;
-			};
-		};
-
 		sata@80000 {
 			status = "okay";
 			nr-ports = <1>;
@@ -204,6 +173,37 @@ sata0_power: regulator@1 {
 	};
 };
 
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x180000>;
+	};
+
+	partition@180000 {
+		label = "u-boot env";
+		reg = <0x0180000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "uImage";
+		reg = <0x0200000 0x600000>;
+	};
+
+	partition@800000 {
+		label = "uInitrd";
+		reg = <0x0800000 0x1000000>;
+	};
+
+	partition@1800000 {
+		label = "rootfs";
+		reg = <0x1800000 0xe800000>;
+	};
+};
+
 &mdio {
 	status = "okay";
 

arch/arm/boot/dts/kirkwood-ts219-6282.dts

@@ -6,7 +6,6 @@
 
 / {
 	mbus {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
 		pcie-controller {
 			status = "okay";
 

arch/arm/boot/dts/kirkwood.dtsi

@@ -27,16 +27,43 @@ mbus {
 		compatible = "marvell,kirkwood-mbus", "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
+		/* If a board file needs to change this ranges it must replace it completely */
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000	/* internal-regs */
+			  MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000	/* nand flash */
+			  MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000	/* crypto sram */
+			  >;
 		controller = <&mbusc>;
 		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
 		pcie-io-aperture  = <0xf2000000 0x100000>;   /*   1 MiB    I/O space */
+
+		crypto@0301 {
+			compatible = "marvell,orion-crypto";
+			reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>,
+			      <MBUS_ID(0x03, 0x01) 0 0x800>;
+			reg-names = "regs", "sram";
+			interrupts = <22>;
+			clocks = <&gate_clk 17>;
+			status = "okay";
+		};
+
+		nand: nand@012f {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cle = <0>;
+			ale = <1>;
+			bank-width = <1>;
+			compatible = "marvell,orion-nand";
+			reg = <MBUS_ID(0x01, 0x2f) 0 0x400>;
+			chip-delay = <25>;
+			/* set partition map and/or chip-delay in board dts */
+			clocks = <&gate_clk 7>;
+			status = "disabled";
+		};
 	};
 
 	ocp@f1000000 {
 		compatible = "simple-bus";
-		ranges = <0x00000000 0xf1000000 0x0100000
-		          0xf4000000 0xf4000000 0x0000400
-		          0xf5000000 0xf5000000 0x0000400>;
+		ranges = <0x00000000 0xf1000000 0x0100000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -192,20 +219,6 @@ ehci@50000 {
 			status = "okay";
 		};
 
-		nand@3000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cle = <0>;
-			ale = <1>;
-			bank-width = <1>;
-			compatible = "marvell,orion-nand";
-			reg = <0xf4000000 0x400>;
-			chip-delay = <25>;
-			/* set partition map and/or chip-delay in board dts */
-			clocks = <&gate_clk 7>;
-			status = "disabled";
-		};
-
 		i2c@11000 {
 			compatible = "marvell,mv64xxx-i2c";
 			reg = <0x11000 0x20>;
@@ -217,16 +230,6 @@ i2c@11000 {
 			status = "disabled";
 		};
 
-		crypto@30000 {
-			compatible = "marvell,orion-crypto";
-			reg = <0x30000 0x10000>,
-			      <0xf5000000 0x800>;
-			reg-names = "regs", "sram";
-			interrupts = <22>;
-			clocks = <&gate_clk 17>;
-			status = "okay";
-		};
-
 		mdio: mdio-bus@72004 {
 			compatible = "marvell,orion-mdio";
 			#address-cells = <1>;

arch/arm/mach-kirkwood/board-dt.c

@@ -92,7 +92,6 @@ static void __init kirkwood_dt_init(void)
 	writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
 
 	BUG_ON(mvebu_mbus_dt_init());
-	kirkwood_setup_wins();
 
 	kirkwood_l2_init();