Merge bk://bk.arm.linux.org.uk/linux-2.6-serial

into ppc970.osdl.org:/home/torvalds/v2.6/linux

arch/arm/mach-pxa/generic.c

@@ -198,10 +198,26 @@ static struct platform_device pxafb_device = {
 	.resource	= pxafb_resources,
 };
 
+static struct platform_device ffuart_device = {
+	.name		= "pxa2xx-uart",
+	.id		= 0,
+};
+static struct platform_device btuart_device = {
+	.name		= "pxa2xx-uart",
+	.id		= 1,
+};
+static struct platform_device stuart_device = {
+	.name		= "pxa2xx-uart",
+	.id		= 2,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&pxamci_device,
 	&udc_device,
 	&pxafb_device,
+	&ffuart_device,
+	&btuart_device,
+	&stuart_device,
 };
 
 static int __init pxa_init(void)

drivers/serial/Kconfig

@@ -603,5 +603,28 @@ config SERIAL_PMACZILOG_CONSOLE
 	  on your PowerMac as the console, you can do so by answering
 	  Y to this option.
 
+config SERIAL_LH7A40X
+	tristate "Sharp LH7A40X embedded UART support"
+	depends on ARM && ARCH_LH7A40X
+	select SERIAL_CORE
+	help
+	  This enables support for the three on-board UARTs of the
+	  Sharp LH7A40X series CPUs.  Choose Y or M.
+
+config SERIAL_LH7A40X_CONSOLE
+	bool "Support for connsole on Sharp LH7A40X serial port"
+	depends on SERIAL_LH7A40X=y
+	select SERIAL_CORE_CONSOLE
+	help
+	  Say Y here if you wish to use one of the serial ports as the
+	  system console--the system console is the device which
+	  receives all kernel messages and warnings and which allows
+	  logins in single user mode.
+
+	  Even if you say Y here, the currently visible framebuffer console
+	  (/dev/tty0) will still be used as the default system console, but
+	  you can alter that using a kernel command line, for example
+	  "console=ttyAM1".
+
 endmenu
 

drivers/serial/Makefile

@@ -34,6 +34,7 @@ obj-$(CONFIG_SERIAL_68360) += 68360serial.o
 obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o
 obj-$(CONFIG_V850E_UART) += v850e_uart.o
 obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
+obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
 obj-$(CONFIG_SERIAL_AU1X00) += au1x00_uart.o
 obj-$(CONFIG_SERIAL_DZ) += dz.o
 obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o

drivers/serial/pxa.c

@@ -35,6 +35,7 @@
 #include <linux/circ_buf.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/device.h>
 
 #include <asm/io.h>
 #include <asm/hardware.h>
@@ -804,26 +805,76 @@ static struct uart_driver serial_pxa_reg = {
 	.cons		= PXA_CONSOLE,
 };
 
-static int __init serial_pxa_init(void)
+static int serial_pxa_suspend(struct device *_dev, u32 state, u32 level)
 {
-	int i, ret;
+        struct uart_pxa_port *sport = dev_get_drvdata(_dev);
 
-	ret = uart_register_driver(&serial_pxa_reg);
-	if (ret)
-		return ret;
+        if (sport && level == SUSPEND_DISABLE)
+                uart_suspend_port(&serial_pxa_reg, &sport->port);
+
+        return 0;
+}
+
+static int serial_pxa_resume(struct device *_dev, u32 level)
+{
+        struct uart_pxa_port *sport = dev_get_drvdata(_dev);
 
-	for (i = 0; i < ARRAY_SIZE(serial_pxa_ports); i++)
-		uart_add_one_port(&serial_pxa_reg, &serial_pxa_ports[i].port);
+        if (sport && level == RESUME_ENABLE)
+                uart_resume_port(&serial_pxa_reg, &sport->port);
 
         return 0;
 }
 
-static void __exit serial_pxa_exit(void)
+static int serial_pxa_probe(struct device *_dev)
 {
-	int i;
+	struct platform_device *dev = to_platform_device(_dev);
+
+	serial_pxa_ports[dev->id].port.dev = _dev;
+	uart_add_one_port(&serial_pxa_reg, &serial_pxa_ports[dev->id].port);
+	dev_set_drvdata(_dev, &serial_pxa_ports[dev->id]);
+	return 0;
+}
+
+static int serial_pxa_remove(struct device *_dev)
+{
+	struct uart_pxa_port *sport = dev_get_drvdata(_dev);
+
+	dev_set_drvdata(_dev, NULL);
+
+	if (sport)
+		uart_remove_one_port(&serial_pxa_reg, &sport->port);
+
+	return 0;
+}
+
+static struct device_driver serial_pxa_driver = {
+        .name           = "pxa2xx-uart",
+        .bus            = &platform_bus_type,
+        .probe          = serial_pxa_probe,
+        .remove         = serial_pxa_remove,
+
+	.suspend	= serial_pxa_suspend,
+	.resume		= serial_pxa_resume,
+};
+
+int __init serial_pxa_init(void)
+{
+	int ret;
+
+	ret = uart_register_driver(&serial_pxa_reg);
+	if (ret != 0)
+		return ret;
+
+	ret = driver_register(&serial_pxa_driver);
+	if (ret != 0)
+		uart_unregister_driver(&serial_pxa_reg);
 
-	for (i = 0; i < ARRAY_SIZE(serial_pxa_ports); i++)
-		uart_remove_one_port(&serial_pxa_reg, &serial_pxa_ports[i].port);
+	return ret;
+}
+
+void __exit serial_pxa_exit(void)
+{
+        driver_unregister(&serial_pxa_driver);
 	uart_unregister_driver(&serial_pxa_reg);
 }
 

include/linux/serial_core.h

@@ -80,6 +80,9 @@
 /* SGI IP22 aka Indy / Challenge S / Indigo 2 */
 #define PORT_IP22ZILOG	56
 
+/* Sharp LH7a40x -- an ARM9 SoC series */
+#define PORT_LH7A40X	57
+
 #ifdef __KERNEL__
 
 #include <linux/config.h>