Skip to content

L
linux
Commit 03ca57cc authored by Jeff Garzik's avatar Jeff Garzik Committed by Linus Torvalds
Browse files
Options

[irda] Add VIA FIR driver, via-ircc 

Contributed by VIA, via Jean Tourrilhes.
parent 6b67d197
Hide whitespace changes
Inline Side-by-side
Showing with 2711 additions and 0 deletions
drivers/net/irda/Kconfig
View file @ 03ca57cc
......@@ -348,5 +348,23 @@ config SA1100_FIR
tristate "SA1100 Internal IR"
depends on ARCH_SA1100 && IRDA
config VIA_FIR
tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
depends on IRDA && ISA
help
Say Y here if you want to build support for the VIA VT8231
and VIA VT1211 IrDA controllers, found on the motherboards using
those those VIA chipsets. To use this controller, you will need
to plug a specific 5 pins FIR IrDA dongle in the specific
motherboard connector. The driver provides support for SIR, MIR
and FIR (4Mbps) speeds.
You will need to specify the 'dongle_id' module parameter to
indicate the FIR dongle attached to the controller.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
via-ircc.
endmenu
drivers/net/irda/Makefile
View file @ 03ca57cc
......@@ -19,6 +19,7 @@ obj-$(CONFIG_SMC_IRCC_OLD) += smc-ircc.o irport.o
obj-$(CONFIG_SMC_IRCC_FIR) += smsc-ircc2.o
obj-$(CONFIG_ALI_FIR) += ali-ircc.o
obj-$(CONFIG_VLSI_FIR) += vlsi_ir.o
obj-$(CONFIG_VIA_FIR) += via-ircc.o
# Old dongle drivers for old SIR drivers
obj-$(CONFIG_ESI_DONGLE_OLD) += esi.o
obj-$(CONFIG_TEKRAM_DONGLE_OLD) += tekram.o
......
drivers/net/irda/via-ircc.c 0 → 100644
View file @ 03ca57cc
/********************************************************************
Filename: via-ircc.c
Version: 1.0
Description: Driver for the VIA VT8231/VT8233 IrDA chipsets
Author: VIA Technologies,inc
Date : 08/06/2003
Copyright (c) 1998-2003 VIA Technologies, Inc.
This program is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTIES OR REPRESENTATIONS; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
F01 Oct/02/02: Modify code for V0.11(move out back to back transfer)
F02 Oct/28/02: Add SB device ID for 3147 and 3177.
Comment :
jul/09/2002 : only implement two kind of dongle currently.
Oct/02/2002 : work on VT8231 and VT8233 .
Aug/06/2003 : change driver format to pci driver .
********************************************************************/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/rtnetlink.h>
#include <linux/pci.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/byteorder.h>
#include <linux/pm.h>
#include <net/irda/wrapper.h>
#include <net/irda/irda.h>
#include <net/irda/irda_device.h>
#include "via-ircc.h"
//#define DBG_IO 1
//#define DBGMSG 1
//#define DBGMSG_96 1
//#define DBGMSG_76 1
//static int debug=0;
#define DBG(x) {if (debug) x;}
#define VIA_MODULE_NAME "via-ircc"
#define CHIP_IO_EXTENT 8
#define BROKEN_DONGLE_ID
static char *driver_name = "via-ircc";
/* Module parameters */
static int qos_mtt_bits = 0x07; /* 1 ms or more */
static int dongle_id = 9; //defalut IBM type
/* Resource is allocate by BIOS user only need to supply dongle_id*/
MODULE_PARM(dongle_id, "i");
/* Max 4 instances for now */
static struct via_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL };
/* Some prototypes */
static int via_ircc_open(int i, chipio_t * info, unsigned int id);
static int __exit via_ircc_close(struct via_ircc_cb *self);
static int via_ircc_setup(chipio_t * info, unsigned int id);
static int via_ircc_dma_receive(struct via_ircc_cb *self);
static int via_ircc_dma_receive_complete(struct via_ircc_cb *self,
int iobase);
static int via_ircc_hard_xmit_sir(struct sk_buff *skb,
struct net_device *dev);
static int via_ircc_hard_xmit_fir(struct sk_buff *skb,
struct net_device *dev);
static void via_ircc_change_speed(struct via_ircc_cb *self, __u32 baud);
static irqreturn_t via_ircc_interrupt(int irq, void *dev_id,
struct pt_regs *regs);
static int via_ircc_is_receiving(struct via_ircc_cb *self);
static int via_ircc_read_dongle_id(int iobase);
static int via_ircc_net_init(struct net_device *dev);
static int via_ircc_net_open(struct net_device *dev);
static int via_ircc_net_close(struct net_device *dev);
static int via_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq,
int cmd);
static struct net_device_stats *via_ircc_net_get_stats(struct net_device
*dev);
static void via_ircc_change_dongle_speed(int iobase, int speed,
int dongle_id);
static int RxTimerHandler(struct via_ircc_cb *self, int iobase);
void hwreset(struct via_ircc_cb *self);
static int via_ircc_dma_xmit(struct via_ircc_cb *self, u16 iobase);
static int upload_rxdata(struct via_ircc_cb *self, int iobase);
static int __init via_init_one (struct pci_dev *pcidev, const struct pci_device_id *id);
static void __exit via_remove_one (struct pci_dev *pdev);
/* Should use udelay() instead, even if we are x86 only - Jean II */
void iodelay(int udelay)
{
u8 data;
int i;
for (i = 0; i < udelay; i++) {
data = inb(0x80);
}
}
static struct pci_device_id via_pci_tbl[] __initdata = {
{ PCI_VENDOR_ID_VIA, DeviceID1, PCI_ANY_ID, PCI_ANY_ID,0,0,0 },
{ PCI_VENDOR_ID_VIA, DeviceID2, PCI_ANY_ID, PCI_ANY_ID,0,0,1 },
{ PCI_VENDOR_ID_VIA, DeviceID3, PCI_ANY_ID, PCI_ANY_ID,0,0,2 },
{ PCI_VENDOR_ID_VIA, DeviceID4, PCI_ANY_ID, PCI_ANY_ID,0,0,3 },
{ PCI_VENDOR_ID_VIA, DeviceID5, PCI_ANY_ID, PCI_ANY_ID,0,0,4 },
{ 0, }
};
MODULE_DEVICE_TABLE(pci,via_pci_tbl);
static struct pci_driver via_driver = {
name: VIA_MODULE_NAME,
id_table: via_pci_tbl,
probe: via_init_one,
remove: via_remove_one,
};
/*
* Function via_ircc_init ()
*
* Initialize chip. Just find out chip type and resource.
*/
int __init via_ircc_init(void)
{
int rc;
#ifdef HEADMSG
DBG(printk(KERN_INFO "via_ircc_init ......\n"));
#endif
rc = pci_register_driver (&via_driver);
#ifdef HEADMSG
DBG(printk(KERN_INFO "via_ircc_init :rc = %d......\n",rc));
#endif
if (rc < 1) {
#ifdef HEADMSG
DBG(printk(KERN_INFO "via_ircc_init return -ENODEV......\n"));
#endif
if (rc == 0) pci_unregister_driver (&via_driver);
return -ENODEV;
}
return 0;
}
static int __init via_init_one (struct pci_dev *pcidev, const struct pci_device_id *id)
{
int rc;
u8 temp,oldPCI_40,oldPCI_44,bTmp,bTmp1;
u16 Chipset,FirDRQ1,FirDRQ0,FirIRQ,FirIOBase;
chipio_t info;
#ifdef HEADMSG
DBG(printk(KERN_INFO "via_init_one : Device ID=(0X%X)\n",id->device));
#endif
if(id->device != DeviceID1 && id->device != DeviceID2 &&
id->device != DeviceID3 && id->device != DeviceID4 &&
id->device != DeviceID5 ){
#ifdef HEADMSG
DBG(printk(KERN_INFO "via_init_one : Device ID(0X%X) not Supported\n",id->device));
#endif
return -ENODEV; //South not exist !!!!!
}
rc = pci_enable_device (pcidev);
#ifdef HEADMSG
DBG(printk(KERN_INFO "via_init_one : rc=%d\n",rc));
#endif
if (rc)
return -ENODEV;
//South Bridge exist
if ( ReadLPCReg(0x20) != 0x3C )
Chipset=0x3096;
else
Chipset=0x3076;
if (Chipset==0x3076) {
#ifdef HEADMSG
DBG(printk(KERN_INFO "via_init_one : 3076 ......\n"));
#endif
WriteLPCReg(7,0x0c );
temp=ReadLPCReg(0x30);//check if BIOS Enable Fir
if((temp&0x01)==1) { // BIOS close or no FIR
WriteLPCReg(0x1d, 0x82 );
WriteLPCReg(0x23,0x18);
temp=ReadLPCReg(0xF0);
if((temp&0x01)==0) {
temp=(ReadLPCReg(0x74)&0x03); //DMA
FirDRQ0=temp + 4;
temp=(ReadLPCReg(0x74)&0x0C) >> 2;
FirDRQ1=temp + 4;
} else {
temp=(ReadLPCReg(0x74)&0x0C) >> 2; //DMA
FirDRQ0=temp + 4;
FirDRQ1=FirDRQ0;
}
FirIRQ=(ReadLPCReg(0x70)&0x0f); //IRQ
FirIOBase=ReadLPCReg(0x60 ) << 8; //IO Space :high byte
FirIOBase=FirIOBase| ReadLPCReg(0x61) ; //low byte
FirIOBase=FirIOBase ;
info.fir_base=FirIOBase;
info.irq=FirIRQ;
info.dma=FirDRQ1;
info.dma2=FirDRQ0;
pci_read_config_byte(pcidev,0x40,&bTmp);
pci_write_config_byte(pcidev,0x40,((bTmp | 0x08) & 0xfe));
pci_read_config_byte(pcidev,0x42,&bTmp);
pci_write_config_byte(pcidev,0x42,(bTmp | 0xf0));
pci_write_config_byte(pcidev,0x5a,0xc0);
WriteLPCReg(0x28, 0x70 );
if (via_ircc_open(0, &info,0x3076) == 0)
rc=0;
} else
rc = -ENODEV; //IR not turn on
} else { //Not VT1211
#ifdef HEADMSG
DBG(printk(KERN_INFO "via_init_one : 3096 ......\n"));
#endif
pci_read_config_byte(pcidev,0x67,&bTmp);//check if BIOS Enable Fir
if((bTmp&0x01)==1) { // BIOS enable FIR
//Enable Double DMA clock
pci_read_config_byte(pcidev,0x42,&oldPCI_40);
pci_write_config_byte(pcidev,0x42,oldPCI_40 | 0x80);
pci_read_config_byte(pcidev,0x40,&oldPCI_40);
pci_write_config_byte(pcidev,0x40,oldPCI_40 & 0xf7);
pci_read_config_byte(pcidev,0x44,&oldPCI_44);
pci_write_config_byte(pcidev,0x44,0x4e);
//---------- read configuration from Function0 of south bridge
if((bTmp&0x02)==0) {
pci_read_config_byte(pcidev,0x44,&bTmp1); //DMA
FirDRQ0 = (bTmp1 & 0x30) >> 4;
pci_read_config_byte(pcidev,0x44,&bTmp1);
FirDRQ1 = (bTmp1 & 0xc0) >> 6;
} else {
pci_read_config_byte(pcidev,0x44,&bTmp1); //DMA
FirDRQ0 = (bTmp1 & 0x30) >> 4 ;
FirDRQ1=0;
}
pci_read_config_byte(pcidev,0x47,&bTmp1); //IRQ
FirIRQ = bTmp1 & 0x0f;
pci_read_config_byte(pcidev,0x69,&bTmp);
FirIOBase = bTmp << 8;//hight byte
pci_read_config_byte(pcidev,0x68,&bTmp);
FirIOBase = (FirIOBase | bTmp ) & 0xfff0;
//-------------------------
info.fir_base=FirIOBase;
info.irq=FirIRQ;
info.dma=FirDRQ1;
info.dma2=FirDRQ0;
if (via_ircc_open(0, &info,0x3096) == 0)
rc=0;
} else
rc = -ENODEV; //IR not turn on !!!!!
}//Not VT1211
#ifdef HEADMSG
DBG(printk(KERN_INFO "via_init_one End : rc=%d\n",rc));
#endif
return rc;
}
/*
* Function via_ircc_clean ()
*
* Close all configured chips
*
*/
static void __exit via_ircc_clean(void)
{
int i;
#ifdef HEADMSG
DBG(printk(KERN_INFO "via_ircc_clean\n"));
#endif
for (i=0; i < 4; i++) {
if (dev_self[i])
via_ircc_close(dev_self[i]);
}
}
static void __exit via_remove_one (struct pci_dev *pdev)
{
#ifdef HEADMSG
DBG(printk(KERN_INFO "via_remove_one : ......\n"));
#endif
via_ircc_clean();
}
static void __exit via_ircc_cleanup(void)
{
#ifdef HEADMSG
DBG(printk(KERN_INFO "via_ircc_cleanup ......\n"));
#endif
via_ircc_clean();
pci_unregister_driver (&via_driver);
}
/*
* Function via_ircc_open (iobase, irq)
*
* Open driver instance
*
*/
static __init int via_ircc_open(int i, chipio_t * info, unsigned int id)
{
struct net_device *dev;
struct via_ircc_cb *self;
int ret;
int err;
if ((via_ircc_setup(info, id)) == -1)
return -1;
/* Allocate new instance of the driver */
self = kmalloc(sizeof(struct via_ircc_cb), GFP_KERNEL);
if (self == NULL) {
return -ENOMEM;
}
memset(self, 0, sizeof(struct via_ircc_cb));
spin_lock_init(&self->lock);
/* Need to store self somewhere */
dev_self[i] = self;
self->index = i;
/* Initialize Resource */
self->io.cfg_base = info->cfg_base;
self->io.fir_base = info->fir_base;
self->io.irq = info->irq;
self->io.fir_ext = CHIP_IO_EXTENT;
self->io.dma = info->dma;
self->io.dma2 = info->dma2;
self->io.fifo_size = 32;
self->chip_id = id;
self->st_fifo.len = 0;
self->RxDataReady = 0;
/* Reserve the ioports that we need */
ret = check_region(self->io.fir_base, self->io.fir_ext);
if (ret < 0) {
// WARNING(__FUNCTION__ "(), can't get iobase of 0x%03x\n",self->io.fir_base);
dev_self[i] = NULL;
kfree(self);
return -ENODEV;
}
request_region(self->io.fir_base, self->io.fir_ext, driver_name);
/* Initialize QoS for this device */
irda_init_max_qos_capabilies(&self->qos);
/* The only value we must override it the baudrate */
// self->qos.baud_rate.bits = IR_9600;// May use this for testing
self->qos.baud_rate.bits =
IR_9600 | IR_19200 | IR_38400 | IR_57600 | IR_115200 |
IR_576000 | IR_1152000 | (IR_4000000 << 8);
self->qos.min_turn_time.bits = qos_mtt_bits;
irda_qos_bits_to_value(&self->qos);
self->flags =
IFF_FIR | IFF_MIR | IFF_SIR | IFF_DMA | IFF_PIO | IFF_DONGLE;
/* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
self->rx_buff.truesize = 14384 + 2048;
self->tx_buff.truesize = 14384 + 2048;
/* Allocate memory if needed */
self->rx_buff.head =
(__u8 *) kmalloc(self->rx_buff.truesize, GFP_KERNEL | GFP_DMA);
if (self->rx_buff.head == NULL) {
kfree(self);
return -ENOMEM;
}
memset(self->rx_buff.head, 0, self->rx_buff.truesize);
self->tx_buff.head =
(__u8 *) kmalloc(self->tx_buff.truesize, GFP_KERNEL | GFP_DMA);
if (self->tx_buff.head == NULL) {
kfree(self->rx_buff.head);
kfree(self);
return -ENOMEM;
}
memset(self->tx_buff.head, 0, self->tx_buff.truesize);
self->rx_buff.in_frame = FALSE;
self->rx_buff.state = OUTSIDE_FRAME;
self->tx_buff.data = self->tx_buff.head;
self->rx_buff.data = self->rx_buff.head;
/* Reset Tx queue info */
self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
self->tx_fifo.tail = self->tx_buff.head;
if (!(dev = dev_alloc("irda%d", &err))) {
kfree(self->tx_buff.head);
kfree(self->rx_buff.head);
kfree(self);
return -ENOMEM;
}
dev->priv = (void *) self;
self->netdev = dev;
/* Override the network functions we need to use */
dev->init = via_ircc_net_init;
dev->hard_start_xmit = via_ircc_hard_xmit_sir;
dev->open = via_ircc_net_open;
dev->stop = via_ircc_net_close;
dev->do_ioctl = via_ircc_net_ioctl;
dev->get_stats = via_ircc_net_get_stats;
rtnl_lock();
err = register_netdevice(dev);
rtnl_unlock();
if (err) {
return -1;
}
MESSAGE("IrDA: Registered device %s\n", dev->name);
/* Check if user has supplied the dongle id or not */
if (!dongle_id)
dongle_id = via_ircc_read_dongle_id(self->io.fir_base);
self->io.dongle_id = dongle_id;
via_ircc_change_dongle_speed(self->io.fir_base, 9600,
self->io.dongle_id);
return 0;
}
/*
* Function via_ircc_close (self)
*
* Close driver instance
*
*/
static int __exit via_ircc_close(struct via_ircc_cb *self)
{
int iobase;
IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
ASSERT(self != NULL, return -1;);
iobase = self->io.fir_base;
ResetChip(iobase, 5); //hardware reset.
/* Remove netdevice */
if (self->netdev) {
rtnl_lock();
unregister_netdevice(self->netdev);
rtnl_unlock();
}
/* Release the PORT that this driver is using */
IRDA_DEBUG(4, "%s(), Releasing Region %03x\n",
__FUNCTION__, self->io.fir_base);
release_region(self->io.fir_base, self->io.fir_ext);
if (self->tx_buff.head)
kfree(self->tx_buff.head);
if (self->rx_buff.head)
kfree(self->rx_buff.head);
dev_self[self->index] = NULL;
kfree(self);
return 0;
}
/*
* Function via_ircc_setup (info)
*
* Returns non-negative on success.
*
*/
static int via_ircc_setup(chipio_t * info, unsigned int chip_id)
{
int iobase = info->fir_base;
SetMaxRxPacketSize(iobase, 0x0fff); //set to max:4095
// FIFO Init
EnRXFIFOReadyInt(iobase, OFF);
EnRXFIFOHalfLevelInt(iobase, OFF);
EnTXFIFOHalfLevelInt(iobase, OFF);
EnTXFIFOUnderrunEOMInt(iobase, ON);
EnTXFIFOReadyInt(iobase, OFF);
InvertTX(iobase, OFF);
InvertRX(iobase, OFF);
if (ReadLPCReg(0x20) == 0x3c)
WriteLPCReg(0xF0, 0); // for VT1211
if (IsSIROn(iobase)) {
SIRFilter(iobase, ON);
SIRRecvAny(iobase, ON);
} else {
SIRFilter(iobase, OFF);
SIRRecvAny(iobase, OFF);
}
//Int Init
EnRXSpecInt(iobase, ON);
//DMA Init Later....
WriteReg(iobase, I_ST_CT_0, 0x80);
EnableDMA(iobase, ON);
return 0;
}
/*
* Function via_ircc_read_dongle_id (void)
*
*/
static int via_ircc_read_dongle_id(int iobase)
{
int dongle_id = 9;
return dongle_id;
}
/*
* Function via_ircc_change_dongle_speed (iobase, speed, dongle_id)
* Change speed of the attach dongle
* only implement two type of dongle currently.
*/
static void via_ircc_change_dongle_speed(int iobase, int speed,
int dongle_id)
{
u8 mode = 0;
WriteReg(iobase, I_ST_CT_0, 0x0);
switch (dongle_id) { //HP1100
case 0x00: /* same as */
case 0x01: /* Differential serial interface */
break;
case 0x02: /* same as */
case 0x03: /* Reserved */
break;
case 0x04: /* Sharp RY5HD01 */
break;
case 0x05: /* Reserved, but this is what the Thinkpad reports */
break;
case 0x06: /* Single-ended serial interface */
break;
case 0x07: /* Consumer-IR only */
break;
case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
UseOneRX(iobase, ON); // use one RX pin RX1,RX2
InvertTX(iobase, OFF);
InvertRX(iobase, OFF);
EnRX2(iobase, ON); //sir to rx2
EnGPIOtoRX2(iobase, OFF);
if (IsSIROn(iobase)) { //sir
// Mode select Off
SlowIRRXLowActive(iobase, ON);
udelay(1000);
SlowIRRXLowActive(iobase, OFF);
} else {
if (IsMIROn(iobase)) { //mir
// Mode select On
SlowIRRXLowActive(iobase, OFF);
udelay(20);
} else { // fir
if (IsFIROn(iobase)) { //fir
// Mode select On
SlowIRRXLowActive(iobase, OFF);
udelay(20);
}
}
}
break;
case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
UseOneRX(iobase, ON); //use ONE RX....RX1
InvertTX(iobase, OFF);
InvertRX(iobase, OFF); // invert RX pin
EnRX2(iobase, ON);
EnGPIOtoRX2(iobase, OFF);
if (IsSIROn(iobase)) { //sir
// Mode select On
SlowIRRXLowActive(iobase, ON);
udelay(20);
// Mode select Off
SlowIRRXLowActive(iobase, OFF);
}
if (IsMIROn(iobase)) { //mir
// Mode select On
SlowIRRXLowActive(iobase, OFF);
udelay(20);
// Mode select Off
SlowIRRXLowActive(iobase, ON);
} else { // fir
if (IsFIROn(iobase)) { //fir
// Mode select On
SlowIRRXLowActive(iobase, OFF);
// TX On
WriteTX(iobase, ON);
udelay(20);
// Mode select OFF
SlowIRRXLowActive(iobase, ON);
udelay(20);
// TX Off
WriteTX(iobase, OFF);
}
}
break;
case 0x0d:
UseOneRX(iobase, OFF); // use two RX pin RX1,RX2
InvertTX(iobase, OFF);
InvertRX(iobase, OFF);
SlowIRRXLowActive(iobase, OFF);
if (IsSIROn(iobase)) { //sir
EnGPIOtoRX2(iobase, OFF);
WriteGIO(iobase, OFF);
EnRX2(iobase, OFF); //sir to rx2
} else { // fir mir
EnGPIOtoRX2(iobase, OFF);
WriteGIO(iobase, OFF);
EnRX2(iobase, OFF); //fir to rx
}
break;
case 0x0ff: /* Vishay */
if (IsSIROn(iobase))
mode = 0;
else if (IsMIROn(iobase))
mode = 1;
else if (IsFIROn(iobase))
mode = 2;
else if (IsVFIROn(iobase))
mode = 5; //VFIR-16
SI_SetMode(iobase, mode);
}
WriteReg(iobase, I_ST_CT_0, 0x80);
}
/*
* Function via_ircc_change_speed (self, baud)
*
* Change the speed of the device
*
*/
static void via_ircc_change_speed(struct via_ircc_cb *self, __u32 speed)
{
struct net_device *dev = self->netdev;
u16 iobase;
u8 value = 0, bTmp;
iobase = self->io.fir_base;
/* Update accounting for new speed */
self->io.speed = speed;
#ifdef DBGMSG
DBG(printk(KERN_INFO "change_speed =%x......\n", speed));
#endif
#ifdef DBG_IO
if (self->io.speed > 0x2580)
outb(0xaa, 0x90);
else
outb(0xbb, 0x90);
#endif
/* Controller mode sellection */
switch (speed) {
case 9600:
value = 11;
SetSIR(iobase, ON);
CRC16(iobase, ON);
break;
case 19200:
value = 5;
SetSIR(iobase, ON);
CRC16(iobase, ON);
break;
case 38400:
value = 2;
SetSIR(iobase, ON);
CRC16(iobase, ON);
break;
case 57600:
value = 1;
SetSIR(iobase, ON);
CRC16(iobase, ON);
break;
case 115200:
value = 0;
SetSIR(iobase, ON);
CRC16(iobase, ON);
break;
case 576000:
value = 0;
SetSIR(iobase, ON);
CRC16(iobase, ON);
break;
case 1152000:
value = 0;
SetMIR(iobase, ON);
break;
case 4000000:
value = 0;
SetFIR(iobase, ON);
SetPulseWidth(iobase, 0);
SetSendPreambleCount(iobase, 14);
CRC16(iobase, OFF);
EnTXCRC(iobase, ON);
break;
case 16000000:
value = 0;
SetVFIR(iobase, ON);
break;
default:
value = 0;
break;
}
/* Set baudrate to 0x19[2..7] */
bTmp = (ReadReg(iobase, I_CF_H_1) & 0x03);
bTmp = bTmp | (value << 2);
WriteReg(iobase, I_CF_H_1, bTmp);
via_ircc_change_dongle_speed(iobase, speed, self->io.dongle_id);
// EnTXFIFOHalfLevelInt(iobase,ON);
/* Set FIFO size to 64 */
SetFIFO(iobase, 64);
/* Enable some interrupts so we can receive frames */
//EnAllInt(iobase,ON);
if (IsSIROn(iobase)) {
SIRFilter(iobase, ON);
SIRRecvAny(iobase, ON);
} else {
SIRFilter(iobase, OFF);
SIRRecvAny(iobase, OFF);
}
if (speed > 115200) {
/* Install FIR xmit handler */
dev->hard_start_xmit = via_ircc_hard_xmit_fir;
via_ircc_dma_receive(self);
} else {
/* Install SIR xmit handler */
dev->hard_start_xmit = via_ircc_hard_xmit_sir;
}
netif_wake_queue(dev);
}
/*
* Function via_ircc_hard_xmit (skb, dev)
*
* Transmit the frame!
*
*/
static int via_ircc_hard_xmit_sir(struct sk_buff *skb,
struct net_device *dev)
{
struct via_ircc_cb *self;
unsigned long flags;
u16 iobase;
__u32 speed;
self = (struct via_ircc_cb *) dev->priv;
ASSERT(self != NULL, return 0;);
iobase = self->io.fir_base;
netif_stop_queue(dev);
/* Check if we need to change the speed */
speed = irda_get_next_speed(skb);
if ((speed != self->io.speed) && (speed != -1)) {
/* Check for empty frame */
if (!skb->len) {
via_ircc_change_speed(self, speed);
dev->trans_start = jiffies;
dev_kfree_skb(skb);
return 0;
} else
self->new_speed = speed;
}
InitCard(iobase);
CommonInit(iobase);
SIRFilter(iobase, ON);
SetSIR(iobase, ON);
CRC16(iobase, ON);
EnTXCRC(iobase, 0);
WriteReg(iobase, I_ST_CT_0, 0x00);
spin_lock_irqsave(&self->lock, flags);
self->tx_buff.data = self->tx_buff.head;
self->tx_buff.len =
async_wrap_skb(skb, self->tx_buff.data,
self->tx_buff.truesize);
self->stats.tx_bytes += self->tx_buff.len;
SetBaudRate(iobase, speed);
SetPulseWidth(iobase, 12);
SetSendPreambleCount(iobase, 0);
WriteReg(iobase, I_ST_CT_0, 0x80);
EnableTX(iobase, ON);
EnableRX(iobase, OFF);
ResetChip(iobase, 0);
ResetChip(iobase, 1);
ResetChip(iobase, 2);
ResetChip(iobase, 3);
ResetChip(iobase, 4);
EnAllInt(iobase, ON);
EnTXDMA(iobase, ON);
EnRXDMA(iobase, OFF);
setup_dma(self->io.dma, self->tx_buff.data, self->tx_buff.len,
DMA_TX_MODE);
SetSendByte(iobase, self->tx_buff.len);
RXStart(iobase, OFF);
TXStart(iobase, ON);
dev->trans_start = jiffies;
spin_unlock_irqrestore(&self->lock, flags);
dev_kfree_skb(skb);
return 0;
}
static int via_ircc_hard_xmit_fir(struct sk_buff *skb,
struct net_device *dev)
{
struct via_ircc_cb *self;
u16 iobase;
__u32 speed;
unsigned long flags;
self = (struct via_ircc_cb *) dev->priv;
iobase = self->io.fir_base;
if (self->st_fifo.len)
return 0;
if (self->chip_id == 0x3076)
iodelay(1500);
else
udelay(1500);
netif_stop_queue(dev);
speed = irda_get_next_speed(skb);
if ((speed != self->io.speed) && (speed != -1)) {
if (!skb->len) {
via_ircc_change_speed(self, speed);
dev->trans_start = jiffies;
dev_kfree_skb(skb);
return 0;
} else
self->new_speed = speed;
}
spin_lock_irqsave(&self->lock, flags);
self->tx_fifo.queue[self->tx_fifo.free].start = self->tx_fifo.tail;
self->tx_fifo.queue[self->tx_fifo.free].len = skb->len;
self->tx_fifo.tail += skb->len;
self->stats.tx_bytes += skb->len;
memcpy(self->tx_fifo.queue[self->tx_fifo.free].start, skb->data,
skb->len);
self->tx_fifo.len++;
self->tx_fifo.free++;
//F01 if (self->tx_fifo.len == 1) {
via_ircc_dma_xmit(self, iobase);
//F01 }
//F01 if (self->tx_fifo.free < (MAX_TX_WINDOW -1 )) netif_wake_queue(self->netdev);
dev->trans_start = jiffies;
dev_kfree_skb(skb);
spin_unlock_irqrestore(&self->lock, flags);
return 0;
}
static int via_ircc_dma_xmit(struct via_ircc_cb *self, u16 iobase)
{
// int i;
// u8 *ch;
EnTXDMA(iobase, OFF);
self->io.direction = IO_XMIT;
EnPhys(iobase, ON);
EnableTX(iobase, ON);
EnableRX(iobase, OFF);
ResetChip(iobase, 0);
ResetChip(iobase, 1);
ResetChip(iobase, 2);
ResetChip(iobase, 3);
ResetChip(iobase, 4);
EnAllInt(iobase, ON);
EnTXDMA(iobase, ON);
EnRXDMA(iobase, OFF);
setup_dma(self->io.dma,
self->tx_fifo.queue[self->tx_fifo.ptr].start,
self->tx_fifo.queue[self->tx_fifo.ptr].len, DMA_TX_MODE);
#ifdef DBGMSG
DBG(printk
(KERN_INFO "dma_xmit:tx_fifo.ptr=%x,len=%x,tx_fifo.len=%x..\n",
self->tx_fifo.ptr, self->tx_fifo.queue[self->tx_fifo.ptr].len,
self->tx_fifo.len));
/*
ch = self->tx_fifo.queue[self->tx_fifo.ptr].start;
for(i=0 ; i < self->tx_fifo.queue[self->tx_fifo.ptr].len ; i++) {
DBG(printk(KERN_INFO "%x..\n",ch[i]));
}
*/
#endif
SetSendByte(iobase, self->tx_fifo.queue[self->tx_fifo.ptr].len);
RXStart(iobase, OFF);
TXStart(iobase, ON);
return 0;
}
/*
* Function via_ircc_dma_xmit_complete (self)
*
* The transfer of a frame in finished. This function will only be called
* by the interrupt handler
*
*/
static int via_ircc_dma_xmit_complete(struct via_ircc_cb *self)
{
int iobase;
int ret = TRUE;
u8 Tx_status;
IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
iobase = self->io.fir_base;
/* Disable DMA */
// DisableDmaChannel(self->io.dma);
/* Check for underrrun! */
/* Clear bit, by writing 1 into it */
Tx_status = GetTXStatus(iobase);
if (Tx_status & 0x08) {
self->stats.tx_errors++;
self->stats.tx_fifo_errors++;
hwreset(self);
// how to clear underrrun ?
} else {
self->stats.tx_packets++;
ResetChip(iobase, 3);
ResetChip(iobase, 4);
}
/* Check if we need to change the speed */
if (self->new_speed) {
via_ircc_change_speed(self, self->new_speed);
self->new_speed = 0;
}
/* Finished with this frame, so prepare for next */
if (IsFIROn(iobase)) {
if (self->tx_fifo.len) {
self->tx_fifo.len--;
self->tx_fifo.ptr++;
}
}
#ifdef DBGMSG
DBG(printk
(KERN_INFO
"via_ircc_dma_xmit_complete:tx_fifo.len=%x ,tx_fifo.ptr=%x,tx_fifo.free=%x...\n",
self->tx_fifo.len, self->tx_fifo.ptr, self->tx_fifo.free));
#endif
/* F01_S
// Any frames to be sent back-to-back?
if (self->tx_fifo.len) {
// Not finished yet!
via_ircc_dma_xmit(self, iobase);
ret = FALSE;
} else {
F01_E*/
// Reset Tx FIFO info
self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
self->tx_fifo.tail = self->tx_buff.head;
//F01 }
// Make sure we have room for more frames
//F01 if (self->tx_fifo.free < (MAX_TX_WINDOW -1 )) {
// Not busy transmitting anymore
// Tell the network layer, that we can accept more frames
netif_wake_queue(self->netdev);
//F01 }
return ret;
}
/*
* Function via_ircc_dma_receive (self)
*
* Set configuration for receive a frame.
*
*/
static int via_ircc_dma_receive(struct via_ircc_cb *self)
{
int iobase;
iobase = self->io.fir_base;
self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
self->tx_fifo.tail = self->tx_buff.head;
self->RxDataReady = 0;
self->io.direction = IO_RECV;
self->rx_buff.data = self->rx_buff.head;
self->st_fifo.len = self->st_fifo.pending_bytes = 0;
self->st_fifo.tail = self->st_fifo.head = 0;
EnPhys(iobase, ON);
EnableTX(iobase, OFF);
EnableRX(iobase, ON);
ResetChip(iobase, 0);
ResetChip(iobase, 1);
ResetChip(iobase, 2);
ResetChip(iobase, 3);
ResetChip(iobase, 4);
EnAllInt(iobase, ON);
EnTXDMA(iobase, OFF);
EnRXDMA(iobase, ON);
setup_dma(self->io.dma2, self->rx_buff.data,
self->rx_buff.truesize, DMA_RX_MODE);
TXStart(iobase, OFF);
RXStart(iobase, ON);
return 0;
}
/*
* Function via_ircc_dma_receive_complete (self)
*
* Controller Finished with receiving frames,
* and this routine is call by ISR
*
*/
static int via_ircc_dma_receive_complete(struct via_ircc_cb *self,
int iobase)
{
struct st_fifo *st_fifo;
struct sk_buff *skb;
int len, i;
u8 status = 0;
iobase = self->io.fir_base;
st_fifo = &self->st_fifo;
if (self->io.speed < 4000000) { //Speed below FIR
len = GetRecvByte(iobase, self);
skb = dev_alloc_skb(len + 1);
if (skb == NULL)
return FALSE;
// Make sure IP header gets aligned
skb_reserve(skb, 1);
skb_put(skb, len - 2);
if (self->chip_id == 0x3076) {
for (i = 0; i < len - 2; i++)
skb->data[i] = self->rx_buff.data[i * 2];
} else {
if (self->chip_id == 0x3096) {
for (i = 0; i < len - 2; i++)
skb->data[i] =
self->rx_buff.data[i];
}
}
// Move to next frame
self->rx_buff.data += len;
self->stats.rx_bytes += len;
self->stats.rx_packets++;
skb->dev = self->netdev;
skb->mac.raw = skb->data;
skb->protocol = htons(ETH_P_IRDA);
netif_rx(skb);
return TRUE;
}
else { //FIR mode
len = GetRecvByte(iobase, self);
if (len == 0)
return TRUE; //interrupt only, data maybe move by RxT
if (((len - 4) < 2) || ((len - 4) > 2048)) {
#ifdef DBGMSG
DBG(printk
(KERN_INFO
"receive_comple:Trouble:len=%x,CurCount=%x,LastCount=%x..\n",
len, RxCurCount(iobase, self),
self->RxLastCount));
#endif
hwreset(self);
return FALSE;
}
#ifdef DBGMSG
DBG(printk
(KERN_INFO
"recv_comple:fifo.len=%x,len=%x,CurCount=%x..\n",
st_fifo->len, len - 4, RxCurCount(iobase, self)));
#endif
st_fifo->entries[st_fifo->tail].status = status;
st_fifo->entries[st_fifo->tail].len = len;
st_fifo->pending_bytes += len;
st_fifo->tail++;
st_fifo->len++;
if (st_fifo->tail > MAX_RX_WINDOW)
st_fifo->tail = 0;
self->RxDataReady = 0;
// It maybe have MAX_RX_WINDOW package receive by
// receive_complete before Timer IRQ
/* F01_S
if (st_fifo->len < (MAX_RX_WINDOW+2 )) {
RXStart(iobase,ON);
SetTimer(iobase,4);
}
else {
F01_E */
EnableRX(iobase, OFF);
EnRXDMA(iobase, OFF);
RXStart(iobase, OFF);
//F01_S
// Put this entry back in fifo
if (st_fifo->head > MAX_RX_WINDOW)
st_fifo->head = 0;
status = st_fifo->entries[st_fifo->head].status;
len = st_fifo->entries[st_fifo->head].len;
st_fifo->head++;
st_fifo->len--;
skb = dev_alloc_skb(len + 1 - 4);
/*
* if frame size,data ptr,or skb ptr are wrong ,the get next
* entry.
*/
if ((skb == NULL) || (skb->data == NULL)
|| (self->rx_buff.data == NULL) || (len < 6)) {
self->stats.rx_dropped++;
return TRUE;
}
skb_reserve(skb, 1);
skb_put(skb, len - 4);
memcpy(skb->data, self->rx_buff.data, len - 4);
#ifdef DBGMSG
DBG(printk
(KERN_INFO "RxT:len=%x.rx_buff=%x\n", len - 4,
self->rx_buff.data));
/* for(i=0 ; i < (len-4) ; i++) {
DBG(printk(KERN_INFO "%x..\n",self->rx_buff.data[i]));
}
*/
#endif
// Move to next frame
self->rx_buff.data += len;
self->stats.rx_bytes += len;
self->stats.rx_packets++;
skb->dev = self->netdev;
skb->mac.raw = skb->data;
skb->protocol = htons(ETH_P_IRDA);
netif_rx(skb);
//F01_E
} //FIR
return TRUE;
}
/*
* if frame is received , but no INT ,then use this routine to upload frame.
*/
static int upload_rxdata(struct via_ircc_cb *self, int iobase)
{
struct sk_buff *skb;
int len;
struct st_fifo *st_fifo;
st_fifo = &self->st_fifo;
len = GetRecvByte(iobase, self);
#ifdef DBGMSG
DBG(printk(KERN_INFO "upload_rxdata: len=%x\n", len));
#endif
skb = dev_alloc_skb(len + 1);
if ((skb == NULL) || ((len - 4) < 2)) {
self->stats.rx_dropped++;
return FALSE;
}
skb_reserve(skb, 1);
skb_put(skb, len - 4 + 1);
memcpy(skb->data, self->rx_buff.data, len - 4 + 1);
st_fifo->tail++;
st_fifo->len++;
if (st_fifo->tail > MAX_RX_WINDOW)
st_fifo->tail = 0;
// Move to next frame
self->rx_buff.data += len;
self->stats.rx_bytes += len;
self->stats.rx_packets++;
skb->dev = self->netdev;
skb->mac.raw = skb->data;
skb->protocol = htons(ETH_P_IRDA);
netif_rx(skb);
if (st_fifo->len < (MAX_RX_WINDOW + 2)) {
RXStart(iobase, ON);
} else {
EnableRX(iobase, OFF);
EnRXDMA(iobase, OFF);
RXStart(iobase, OFF);
}
return TRUE;
}
/*
* Implement back to back receive , use this routine to upload data.
*/
static int RxTimerHandler(struct via_ircc_cb *self, int iobase)
{
struct st_fifo *st_fifo;
struct sk_buff *skb;
int len;
u8 status;
st_fifo = &self->st_fifo;
if (CkRxRecv(iobase, self)) {
// if still receiving ,then return ,don't upload frame
self->RetryCount = 0;
SetTimer(iobase, 20);
self->RxDataReady++;
return FALSE;
} else
self->RetryCount++;
if ((self->RetryCount >= 1) ||
((st_fifo->pending_bytes + 2048) > self->rx_buff.truesize)
|| (st_fifo->len >= (MAX_RX_WINDOW))) {
while (st_fifo->len > 0) { //upload frame
// Put this entry back in fifo
if (st_fifo->head > MAX_RX_WINDOW)
st_fifo->head = 0;
status = st_fifo->entries[st_fifo->head].status;
len = st_fifo->entries[st_fifo->head].len;
st_fifo->head++;
st_fifo->len--;
skb = dev_alloc_skb(len + 1 - 4);
/*
* if frame size, data ptr, or skb ptr are wrong,
* then get next entry.
*/
if ((skb == NULL) || (skb->data == NULL)
|| (self->rx_buff.data == NULL) || (len < 6)) {
self->stats.rx_dropped++;
continue;
}
skb_reserve(skb, 1);
skb_put(skb, len - 4);
memcpy(skb->data, self->rx_buff.data, len - 4);
#ifdef DBGMSG
DBG(printk
(KERN_INFO "RxT:len=%x.head=%x\n", len - 4,
st_fifo->head));
#endif
// Move to next frame
self->rx_buff.data += len;
self->stats.rx_bytes += len;
self->stats.rx_packets++;
skb->dev = self->netdev;
skb->mac.raw = skb->data;
skb->protocol = htons(ETH_P_IRDA);
netif_rx(skb);
} //while
self->RetryCount = 0;
#ifdef DBGMSG
DBG(printk
(KERN_INFO
"RxT:End of upload HostStatus=%x,RxStatus=%x\n",
GetHostStatus(iobase), GetRXStatus(iobase)));
#endif
/*
* if frame is receive complete at this routine ,then upload
* frame.
*/
if ((GetRXStatus(iobase) & 0x10)
&& (RxCurCount(iobase, self) != self->RxLastCount)) {
upload_rxdata(self, iobase);
if (irda_device_txqueue_empty(self->netdev))
via_ircc_dma_receive(self);
}
} // timer detect complete
else
SetTimer(iobase, 4);
return TRUE;
}
/*
* Function via_ircc_interrupt (irq, dev_id, regs)
*
* An interrupt from the chip has arrived. Time to do some work
*
*/
static irqreturn_t via_ircc_interrupt(int irq, void *dev_id,
struct pt_regs *regs)
{
struct net_device *dev = (struct net_device *) dev_id;
struct via_ircc_cb *self;
int iobase;
u8 iHostIntType, iRxIntType, iTxIntType;
if (!dev) {
WARNING("%s: irq %d for unknown device.\n", driver_name,
irq);
return IRQ_NONE;
}
self = (struct via_ircc_cb *) dev->priv;
iobase = self->io.fir_base;
spin_lock(&self->lock);
iHostIntType = GetHostStatus(iobase);
if ((iHostIntType & 0x40) != 0) { //Timer Event
self->EventFlag.TimeOut++;
ClearTimerInt(iobase, 1);
if (self->io.direction == IO_XMIT) {
via_ircc_dma_xmit(self, iobase);
}
if (self->io.direction == IO_RECV) {
/*
* frame ready hold too long, must reset.
*/
if (self->RxDataReady > 30) {
hwreset(self);
if (irda_device_txqueue_empty
(self->netdev)) {
via_ircc_dma_receive(self);
}
} else { // call this to upload frame.
RxTimerHandler(self, iobase);
}
} //RECV
} //Timer Event
if ((iHostIntType & 0x20) != 0) { //Tx Event
iTxIntType = GetTXStatus(iobase);
if (iTxIntType & 0x4) {
self->EventFlag.EOMessage++; // read and will auto clean
if (via_ircc_dma_xmit_complete(self)) {
if (irda_device_txqueue_empty
(self->netdev)) {
via_ircc_dma_receive(self);
}
} else {
self->EventFlag.Unknown++;
}
} //EOP
} //Tx Event
//----------------------------------------
if ((iHostIntType & 0x10) != 0) { //Rx Event
/* Check if DMA has finished */
iRxIntType = GetRXStatus(iobase);
#ifdef DBGMSG
if (!iRxIntType)
DBG(printk(KERN_INFO " RxIRQ =0\n"));
#endif
if (iRxIntType & 0x10) {
if (via_ircc_dma_receive_complete(self, iobase)) {
//F01 if(!(IsFIROn(iobase))) via_ircc_dma_receive(self);
via_ircc_dma_receive(self);
}
} // No ERR
else { //ERR
#ifdef DBGMSG
DBG(printk
(KERN_INFO
" RxIRQ ERR:iRxIntType=%x,HostIntType=%x,CurCount=%x,RxLastCount=%x_____\n",
iRxIntType, iHostIntType, RxCurCount(iobase,
self),
self->RxLastCount));
#endif
if (iRxIntType & 0x20) { //FIFO OverRun ERR
ResetChip(iobase, 0);
ResetChip(iobase, 1);
} else { //PHY,CRC ERR
if (iRxIntType != 0x08)
hwreset(self); //F01
}
via_ircc_dma_receive(self);
} //ERR
} //Rx Event
spin_unlock(&self->lock);
return IRQ_HANDLED;
}
void hwreset(struct via_ircc_cb *self)
{
int iobase;
iobase = self->io.fir_base;
#ifdef DBGMSG
DBG(printk(KERN_INFO "hwreset ....\n"));
#endif
ResetChip(iobase, 5);
EnableDMA(iobase, OFF);
EnableTX(iobase, OFF);
EnableRX(iobase, OFF);
EnRXDMA(iobase, OFF);
EnTXDMA(iobase, OFF);
RXStart(iobase, OFF);
TXStart(iobase, OFF);
InitCard(iobase);
CommonInit(iobase);
SIRFilter(iobase, ON);
SetSIR(iobase, ON);
CRC16(iobase, ON);
EnTXCRC(iobase, 0);
WriteReg(iobase, I_ST_CT_0, 0x00);
SetBaudRate(iobase, 9600);
SetPulseWidth(iobase, 12);
SetSendPreambleCount(iobase, 0);
WriteReg(iobase, I_ST_CT_0, 0x80);
via_ircc_change_speed(self, self->io.speed);
self->st_fifo.len = 0;
}
/*
* Function via_ircc_is_receiving (self)
*
* Return TRUE is we are currently receiving a frame
*
*/
static int via_ircc_is_receiving(struct via_ircc_cb *self)
{
int status = FALSE;
int iobase;
ASSERT(self != NULL, return FALSE;);
iobase = self->io.fir_base;
if (CkRxRecv(iobase, self))
status = TRUE;
#ifdef DBGMSG
DBG(printk(KERN_INFO "is_receiving status=%x....\n", status));
#endif
return status;
}
/*
* Function via_ircc_net_init (dev)
*
* Initialize network device
*
*/
static int via_ircc_net_init(struct net_device *dev)
{
IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
/* Keep track of module usage */
SET_MODULE_OWNER(dev);
/* Setup to be a normal IrDA network device driver */
irda_device_setup(dev);
/* Insert overrides below this line! */
return 0;
}
/*
* Function via_ircc_net_open (dev)
*
* Start the device
*
*/
static int via_ircc_net_open(struct net_device *dev)
{
struct via_ircc_cb *self;
int iobase;
char hwname[32];
IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
ASSERT(dev != NULL, return -1;);
self = (struct via_ircc_cb *) dev->priv;
self->stats.rx_packets = 0;
ASSERT(self != NULL, return 0;);
iobase = self->io.fir_base;
if (request_irq
(self->io.irq, via_ircc_interrupt, 0, dev->name, dev)) {
WARNING("%s, unable to allocate irq=%d\n", driver_name,
self->io.irq);
return -EAGAIN;
}
/*
* Always allocate the DMA channel after the IRQ, and clean up on
* failure.
*/
if (request_dma(self->io.dma, dev->name)) {
WARNING("%s, unable to allocate dma=%d\n", driver_name,
self->io.dma);
free_irq(self->io.irq, self);
return -EAGAIN;
}
if (self->io.dma2 != self->io.dma) {
if (request_dma(self->io.dma2, dev->name)) {
WARNING("%s, unable to allocate dma2=%d\n",
driver_name, self->io.dma2);
free_irq(self->io.irq, self);
return -EAGAIN;
}
}
/* turn on interrupts */
EnAllInt(iobase, ON);
EnInternalLoop(iobase, OFF);
EnExternalLoop(iobase, OFF);
/* Ready to play! */
netif_start_queue(dev);
/*
* Open new IrLAP layer instance, now that everything should be
* initialized properly
*/
sprintf(hwname, "VIA");
/*
* for different kernel ,irlap_open have different parameter.
*/
self->irlap = irlap_open(dev, &self->qos, hwname);
// self->irlap = irlap_open(dev, &self->qos);
self->RxLastCount = 0;
return 0;
}
/*
* Function via_ircc_net_close (dev)
*
* Stop the device
*
*/
static int via_ircc_net_close(struct net_device *dev)
{
struct via_ircc_cb *self;
int iobase;
IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
ASSERT(dev != NULL, return -1;);
self = (struct via_ircc_cb *) dev->priv;
ASSERT(self != NULL, return 0;);
#ifdef DBG_IO
outb(0xff, 0x90);
outb(0xff, 0x94);
#endif
/* Stop device */
netif_stop_queue(dev);
/* Stop and remove instance of IrLAP */
if (self->irlap)
irlap_close(self->irlap);
self->irlap = NULL;
iobase = self->io.fir_base;
EnTXDMA(iobase, OFF);
EnRXDMA(iobase, OFF);
DisableDmaChannel(self->io.dma);
/* Disable interrupts */
EnAllInt(iobase, OFF);
free_irq(self->io.irq, dev);
free_dma(self->io.dma);
return 0;
}
/*
* Function via_ircc_net_ioctl (dev, rq, cmd)
*
* Process IOCTL commands for this device
*
*/
static int via_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq,
int cmd)
{
struct if_irda_req *irq = (struct if_irda_req *) rq;
struct via_ircc_cb *self;
unsigned long flags;
int ret = 0;
ASSERT(dev != NULL, return -1;);
self = dev->priv;
ASSERT(self != NULL, return -1;);
IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name,
cmd);
/* Disable interrupts & save flags */
spin_lock_irqsave(&self->lock, flags);
switch (cmd) {
case SIOCSBANDWIDTH: /* Set bandwidth */
if (!capable(CAP_NET_ADMIN)) {
ret = -EPERM;
goto out;
}
via_ircc_change_speed(self, irq->ifr_baudrate);
break;
case SIOCSMEDIABUSY: /* Set media busy */
if (!capable(CAP_NET_ADMIN)) {
ret = -EPERM;
goto out;
}
irda_device_set_media_busy(self->netdev, TRUE);
break;
case SIOCGRECEIVING: /* Check if we are receiving right now */
irq->ifr_receiving = via_ircc_is_receiving(self);
break;
default:
ret = -EOPNOTSUPP;
}
out:
spin_unlock_irqrestore(&self->lock, flags);
return ret;
}
static struct net_device_stats *via_ircc_net_get_stats(struct net_device
*dev)
{
struct via_ircc_cb *self = (struct via_ircc_cb *) dev->priv;
return &self->stats;
}
MODULE_AUTHOR("VIA Technologies,inc");
MODULE_DESCRIPTION("VIA IrDA Device Driver");
MODULE_LICENSE("GPL");
module_init(via_ircc_init);
module_exit(via_ircc_cleanup);
drivers/net/irda/via-ircc.h 0 → 100644
View file @ 03ca57cc
/*********************************************************************
*
* Filename: via-ircc.h
* Version: 1.0
* Description: Driver for the VIA VT8231/VT8233 IrDA chipsets
* Author: VIA Technologies, inc
* Date : 08/06/2003
Copyright (c) 1998-2003 VIA Technologies, Inc.
This program is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTIES OR REPRESENTATIONS; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
* Comment:
* jul/08/2002 : Rx buffer length should use Rx ring ptr.
* Oct/28/2002 : Add SB id for 3147 and 3177.
* jul/09/2002 : only implement two kind of dongle currently.
* Oct/02/2002 : work on VT8231 and VT8233 .
* Aug/06/2003 : change driver format to pci driver .
********************************************************************/
#ifndef via_IRCC_H
#define via_IRCC_H
#include <linux/time.h>
#include <linux/spinlock.h>
#include <linux/pm.h>
#include <asm/io.h>
#define MAX_TX_WINDOW 7
#define MAX_RX_WINDOW 7
struct st_fifo_entry {
int status;
int len;
};
struct st_fifo {
struct st_fifo_entry entries[MAX_RX_WINDOW + 2];
int pending_bytes;
int head;
int tail;
int len;
};
struct frame_cb {
void *start; /* Start of frame in DMA mem */
int len; /* Lenght of frame in DMA mem */
};
struct tx_fifo {
struct frame_cb queue[MAX_TX_WINDOW + 2]; /* Info about frames in queue */
int ptr; /* Currently being sent */
int len; /* Lenght of queue */
int free; /* Next free slot */
void *tail; /* Next free start in DMA mem */
};
struct eventflag // for keeping track of Interrupt Events
{
//--------tx part
unsigned char TxFIFOUnderRun;
unsigned char EOMessage;
unsigned char TxFIFOReady;
unsigned char EarlyEOM;
//--------rx part
unsigned char PHYErr;
unsigned char CRCErr;
unsigned char RxFIFOOverRun;
unsigned char EOPacket;
unsigned char RxAvail;
unsigned char TooLargePacket;
unsigned char SIRBad;
//--------unknown
unsigned char Unknown;
//----------
unsigned char TimeOut;
unsigned char RxDMATC;
unsigned char TxDMATC;
};
/* Private data for each instance */
struct via_ircc_cb {
struct st_fifo st_fifo; /* Info about received frames */
struct tx_fifo tx_fifo; /* Info about frames to be transmitted */
struct net_device *netdev; /* Yes! we are some kind of netdevice */
struct net_device_stats stats;
struct irlap_cb *irlap; /* The link layer we are binded to */
struct qos_info qos; /* QoS capabilities for this device */
chipio_t io; /* IrDA controller information */
iobuff_t tx_buff; /* Transmit buffer */
iobuff_t rx_buff; /* Receive buffer */
__u8 ier; /* Interrupt enable register */
struct timeval stamp;
struct timeval now;
spinlock_t lock; /* For serializing operations */
__u32 flags; /* Interface flags */
__u32 new_speed;
int index; /* Instance index */
struct eventflag EventFlag;
struct pm_dev *dev;
unsigned int chip_id; /* to remember chip id */
unsigned int RetryCount;
unsigned int RxDataReady;
unsigned int RxLastCount;
};
//---------I=Infrared, H=Host, M=Misc, T=Tx, R=Rx, ST=Status,
// CF=Config, CT=Control, L=Low, H=High, C=Count
#define I_CF_L_0 0x10
#define I_CF_H_0 0x11
#define I_SIR_BOF 0x12
#define I_SIR_EOF 0x13
#define I_ST_CT_0 0x15
#define I_ST_L_1 0x16
#define I_ST_H_1 0x17
#define I_CF_L_1 0x18
#define I_CF_H_1 0x19
#define I_CF_L_2 0x1a
#define I_CF_H_2 0x1b
#define I_CF_3 0x1e
#define H_CT 0x20
#define H_ST 0x21
#define M_CT 0x22
#define TX_CT_1 0x23
#define TX_CT_2 0x24
#define TX_ST 0x25
#define RX_CT 0x26
#define RX_ST 0x27
#define RESET 0x28
#define P_ADDR 0x29
#define RX_C_L 0x2a
#define RX_C_H 0x2b
#define RX_P_L 0x2c
#define RX_P_H 0x2d
#define TX_C_L 0x2e
#define TX_C_H 0x2f
#define TIMER 0x32
#define I_CF_4 0x33
#define I_T_C_L 0x34
#define I_T_C_H 0x35
#define VERSION 0x3f
//-------------------------------
#define StartAddr 0x10 // the first register address
#define EndAddr 0x3f // the last register address
#define GetBit(val,bit) val = (unsigned char) ((val>>bit) & 0x1)
// Returns the bit
#define SetBit(val,bit) val= (unsigned char ) (val | (0x1 << bit))
// Sets bit to 1
#define ResetBit(val,bit) val= (unsigned char ) (val & ~(0x1 << bit))
// Sets bit to 0
#define PCI_CONFIG_ADDRESS 0xcf8
#define PCI_CONFIG_DATA 0xcfc
#define VenderID 0x1106
#define DeviceID1 0x8231
#define DeviceID2 0x3109
#define DeviceID3 0x3074
//F01_S
#define DeviceID4 0x3147
#define DeviceID5 0x3177
//F01_E
#define OFF 0
#define ON 1
#define DMA_TX_MODE 0x08
#define DMA_RX_MODE 0x04
#define DMA1 0
#define DMA2 0xc0
#define MASK1 DMA1+0x0a
#define MASK2 DMA2+0x14
#define Clk_bit 0x40
#define Tx_bit 0x01
#define Rd_Valid 0x08
#define RxBit 0x08
__u8 ReadPCIByte(__u8, __u8, __u8, __u8);
__u32 ReadPCI(__u8, __u8, __u8, __u8);
void WritePCI(__u8, __u8, __u8, __u8, __u32);
void WritePCIByte(__u8, __u8, __u8, __u8, __u8);
int mySearchPCI(__u8 *, __u16, __u16);
void DisableDmaChannel(unsigned int channel)
{
switch (channel) { // 8 Bit DMA channels DMAC1
case 0:
outb(4, MASK1); //mask channel 0
break;
case 1:
outb(5, MASK1); //Mask channel 1
break;
case 2:
outb(6, MASK1); //Mask channel 2
break;
case 3:
outb(7, MASK1); //Mask channel 3
break;
case 5:
outb(5, MASK2); //Mask channel 5
break;
case 6:
outb(6, MASK2); //Mask channel 6
break;
case 7:
outb(7, MASK2); //Mask channel 7
break;
default:
break;
}; //Switch
}
unsigned char ReadLPCReg(int iRegNum)
{
unsigned char iVal;
outb(0x87, 0x2e);
outb(0x87, 0x2e);
outb(iRegNum, 0x2e);
iVal = inb(0x2f);
outb(0xaa, 0x2e);
return iVal;
}
void WriteLPCReg(int iRegNum, unsigned char iVal)
{
outb(0x87, 0x2e);
outb(0x87, 0x2e);
outb(iRegNum, 0x2e);
outb(iVal, 0x2f);
outb(0xAA, 0x2e);
}
__u8 ReadReg(unsigned int BaseAddr, int iRegNum)
{
return ((__u8) inb(BaseAddr + iRegNum));
}
void WriteReg(unsigned int BaseAddr, int iRegNum, unsigned char iVal)
{
outb(iVal, BaseAddr + iRegNum);
}
int WriteRegBit(unsigned int BaseAddr, unsigned char RegNum,
unsigned char BitPos, unsigned char value)
{
__u8 Rtemp, Wtemp;
if (BitPos > 7) {
return -1;
}
if ((RegNum < StartAddr) || (RegNum > EndAddr))
return -1;
Rtemp = ReadReg(BaseAddr, RegNum);
if (value == 0)
Wtemp = ResetBit(Rtemp, BitPos);
else {
if (value == 1)
Wtemp = SetBit(Rtemp, BitPos);
else
return -1;
}
WriteReg(BaseAddr, RegNum, Wtemp);
return 0;
}
__u8 CheckRegBit(unsigned int BaseAddr, unsigned char RegNum,
unsigned char BitPos)
{
__u8 temp;
if (BitPos > 7)
return 0xff;
if ((RegNum < StartAddr) || (RegNum > EndAddr)) {
// printf("what is the register %x!\n",RegNum);
}
temp = ReadReg(BaseAddr, RegNum);
return GetBit(temp, BitPos);
}
__u8 ReadPCIByte(__u8 bus, __u8 device, __u8 fun, __u8 reg)
{
__u32 dTmp;
__u8 bData, bTmp;
bTmp = reg & ~0x03;
dTmp = ReadPCI(bus, device, fun, bTmp);
bTmp = reg & 0x03;
bData = (__u8) (dTmp >> bTmp);
return bData;
}
__u32 ReadPCI(__u8 bus, __u8 device, __u8 fun, __u8 reg)
{
__u32 CONFIG_ADDR, temp, data;
if ((bus == 0xff) || (device == 0xff) || (fun == 0xff))
return 0xffffffff;
CONFIG_ADDR = 0x80000000;
temp = (__u32) reg << 2;
CONFIG_ADDR = CONFIG_ADDR | temp;
temp = (__u32) fun << 8;
CONFIG_ADDR = CONFIG_ADDR | temp;
temp = (__u32) device << 11;
CONFIG_ADDR = CONFIG_ADDR | temp;
temp = (__u32) bus << 16;
CONFIG_ADDR = CONFIG_ADDR | temp;
outl(PCI_CONFIG_ADDRESS, CONFIG_ADDR);
data = inl(PCI_CONFIG_DATA);
return data;
}
void WritePCIByte(__u8 bus, __u8 device, __u8 fun, __u8 reg,
__u8 CONFIG_DATA)
{
__u32 dTmp, dTmp1 = 0;
__u8 bTmp;
bTmp = reg & ~0x03;
dTmp = ReadPCI(bus, device, fun, bTmp);
switch (reg & 0x03) {
case 0:
dTmp1 = (dTmp & ~0xff) | CONFIG_DATA;
break;
case 1:
dTmp = (dTmp & ~0x00ff00);
dTmp1 = CONFIG_DATA;
dTmp1 = dTmp1 << 8;
dTmp1 = dTmp1 | dTmp;
break;
case 2:
dTmp = (dTmp & ~0xff0000);
dTmp1 = CONFIG_DATA;
dTmp1 = dTmp1 << 16;
dTmp1 = dTmp1 | dTmp;
break;
case 3:
dTmp = (dTmp & ~0xff000000);
dTmp1 = CONFIG_DATA;
dTmp1 = dTmp1 << 24;
dTmp1 = dTmp1 | dTmp;
break;
}
WritePCI(bus, device, fun, bTmp, dTmp1);
}
//------------------
void WritePCI(__u8 bus, __u8 device, __u8 fun, __u8 reg, __u32 CONFIG_DATA)
{
__u32 CONFIG_ADDR, temp;
if ((bus == 0xff) || (device == 0xff) || (fun == 0xff))
return;
CONFIG_ADDR = 0x80000000;
temp = (__u32) reg << 2;
CONFIG_ADDR = CONFIG_ADDR | temp;
temp = (__u32) fun << 8;
CONFIG_ADDR = CONFIG_ADDR | temp;
temp = (__u32) device << 11;
CONFIG_ADDR = CONFIG_ADDR | temp;
temp = (__u32) bus << 16;
CONFIG_ADDR = CONFIG_ADDR | temp;
outl(PCI_CONFIG_ADDRESS, CONFIG_ADDR);
outl(PCI_CONFIG_DATA, CONFIG_DATA);
}
// find device with DeviceID and VenderID // if match return three byte buffer (bus,device,function) // no found, address={99,99,99}
int mySearchPCI(__u8 * SBridpos, __u16 VID, __u16 DID)
{
__u8 i, j, k;
__u16 FindDeviceID, FindVenderID;
for (k = 0; k < 8; k++) { //scan function
i = 0;
j = 0x11;
k = 0;
if (ReadPCI(i, j, k, 0) < 0xffffffff) { // not empty
FindDeviceID = (__u16) (ReadPCI(i, j, k, 0) >> 16);
FindVenderID =
(__u16) (ReadPCI(i, j, k, 0) & 0x0000ffff);
if ((VID == FindVenderID) && (DID == FindDeviceID)) {
SBridpos[0] = i; // bus
SBridpos[1] = j; //device
SBridpos[2] = k; //func
return 1;
}
}
}
return 0;
}
void SetMaxRxPacketSize(__u16 iobase, __u16 size)
{
__u16 low, high;
if ((size & 0xe000) == 0) {
low = size & 0x00ff;
high = (size & 0x1f00) >> 8;
WriteReg(iobase, I_CF_L_2, low);
WriteReg(iobase, I_CF_H_2, high);
}
}
//for both Rx and Tx
void SetFIFO(__u16 iobase, __u16 value)
{
switch (value) {
case 128:
WriteRegBit(iobase, 0x11, 0, 0);
WriteRegBit(iobase, 0x11, 7, 1);
break;
case 64:
WriteRegBit(iobase, 0x11, 0, 0);
WriteRegBit(iobase, 0x11, 7, 0);
break;
case 32:
WriteRegBit(iobase, 0x11, 0, 1);
WriteRegBit(iobase, 0x11, 7, 0);
break;
default:
WriteRegBit(iobase, 0x11, 0, 0);
WriteRegBit(iobase, 0x11, 7, 0);
}
}
#define CRC16(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_L_0,7,val) //0 for 32 CRC
/*
#define SetVFIR(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_H_0,5,val)
#define SetFIR(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_L_0,6,val)
#define SetMIR(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_L_0,5,val)
#define SetSIR(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_L_0,4,val)
*/
#define SIRFilter(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_L_0,3,val)
#define Filter(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_L_0,2,val)
#define InvertTX(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_L_0,1,val)
#define InvertRX(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_L_0,0,val)
//****************************I_CF_H_0
#define EnableTX(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_H_0,4,val)
#define EnableRX(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_H_0,3,val)
#define EnableDMA(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_H_0,2,val)
#define SIRRecvAny(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_H_0,1,val)
#define DiableTrans(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_H_0,0,val)
//***************************I_SIR_BOF,I_SIR_EOF
#define SetSIRBOF(BaseAddr,val) WriteReg(BaseAddr,I_SIR_BOF,val)
#define SetSIREOF(BaseAddr,val) WriteReg(BaseAddr,I_SIR_EOF,val)
#define GetSIRBOF(BaseAddr) ReadReg(BaseAddr,I_SIR_BOF)
#define GetSIREOF(BaseAddr) ReadReg(BaseAddr,I_SIR_EOF)
//*******************I_ST_CT_0
#define EnPhys(BaseAddr,val) WriteRegBit(BaseAddr,I_ST_CT_0,7,val)
#define IsModeError(BaseAddr) CheckRegBit(BaseAddr,I_ST_CT_0,6) //RO
#define IsVFIROn(BaseAddr) CheckRegBit(BaseAddr,0x14,0) //RO for VT1211 only
#define IsFIROn(BaseAddr) CheckRegBit(BaseAddr,I_ST_CT_0,5) //RO
#define IsMIROn(BaseAddr) CheckRegBit(BaseAddr,I_ST_CT_0,4) //RO
#define IsSIROn(BaseAddr) CheckRegBit(BaseAddr,I_ST_CT_0,3) //RO
#define IsEnableTX(BaseAddr) CheckRegBit(BaseAddr,I_ST_CT_0,2) //RO
#define IsEnableRX(BaseAddr) CheckRegBit(BaseAddr,I_ST_CT_0,1) //RO
#define Is16CRC(BaseAddr) CheckRegBit(BaseAddr,I_ST_CT_0,0) //RO
//***************************I_CF_3
#define DisableAdjacentPulseWidth(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_3,5,val) //1 disable
#define DisablePulseWidthAdjust(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_3,4,val) //1 disable
#define UseOneRX(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_3,1,val) //0 use two RX
#define SlowIRRXLowActive(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_3,0,val) //0 show RX high=1 in SIR
//***************************H_CT
#define EnAllInt(BaseAddr,val) WriteRegBit(BaseAddr,H_CT,7,val)
#define TXStart(BaseAddr,val) WriteRegBit(BaseAddr,H_CT,6,val)
#define RXStart(BaseAddr,val) WriteRegBit(BaseAddr,H_CT,5,val)
#define ClearRXInt(BaseAddr,val) WriteRegBit(BaseAddr,H_CT,4,val) // 1 clear
//*****************H_ST
#define IsRXInt(BaseAddr) CheckRegBit(BaseAddr,H_ST,4)
#define GetIntIndentify(BaseAddr) ((ReadReg(BaseAddr,H_ST)&0xf1) >>1)
#define IsHostBusy(BaseAddr) CheckRegBit(BaseAddr,H_ST,0)
#define GetHostStatus(BaseAddr) ReadReg(BaseAddr,H_ST) //RO
//**************************M_CT
#define EnTXDMA(BaseAddr,val) WriteRegBit(BaseAddr,M_CT,7,val)
#define EnRXDMA(BaseAddr,val) WriteRegBit(BaseAddr,M_CT,6,val)
#define SwapDMA(BaseAddr,val) WriteRegBit(BaseAddr,M_CT,5,val)
#define EnInternalLoop(BaseAddr,val) WriteRegBit(BaseAddr,M_CT,4,val)
#define EnExternalLoop(BaseAddr,val) WriteRegBit(BaseAddr,M_CT,3,val)
//**************************TX_CT_1
#define EnTXFIFOHalfLevelInt(BaseAddr,val) WriteRegBit(BaseAddr,TX_CT_1,4,val) //half empty int (1 half)
#define EnTXFIFOUnderrunEOMInt(BaseAddr,val) WriteRegBit(BaseAddr,TX_CT_1,5,val)
#define EnTXFIFOReadyInt(BaseAddr,val) WriteRegBit(BaseAddr,TX_CT_1,6,val) //int when reach it threshold (setting by bit 4)
//**************************TX_CT_2
#define ForceUnderrun(BaseAddr,val) WriteRegBit(BaseAddr,TX_CT_2,7,val) // force an underrun int
#define EnTXCRC(BaseAddr,val) WriteRegBit(BaseAddr,TX_CT_2,6,val) //1 for FIR,MIR...0 (not SIR)
#define ForceBADCRC(BaseAddr,val) WriteRegBit(BaseAddr,TX_CT_2,5,val) //force an bad CRC
#define SendSIP(BaseAddr,val) WriteRegBit(BaseAddr,TX_CT_2,4,val) //send indication pulse for prevent SIR disturb
#define ClearEnTX(BaseAddr,val) WriteRegBit(BaseAddr,TX_CT_2,3,val) // opposite to EnTX
//*****************TX_ST
#define GetTXStatus(BaseAddr) ReadReg(BaseAddr,TX_ST) //RO
//**************************RX_CT
#define EnRXSpecInt(BaseAddr,val) WriteRegBit(BaseAddr,RX_CT,0,val)
#define EnRXFIFOReadyInt(BaseAddr,val) WriteRegBit(BaseAddr,RX_CT,1,val) //enable int when reach it threshold (setting by bit 7)
#define EnRXFIFOHalfLevelInt(BaseAddr,val) WriteRegBit(BaseAddr,RX_CT,7,val) //enable int when (1) half full...or (0) just not full
//*****************RX_ST
#define GetRXStatus(BaseAddr) ReadReg(BaseAddr,RX_ST) //RO
//***********************P_ADDR
#define SetPacketAddr(BaseAddr,addr) WriteReg(BaseAddr,P_ADDR,addr)
//***********************I_CF_4
#define EnGPIOtoRX2(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_4,7,val)
#define EnTimerInt(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_4,1,val)
#define ClearTimerInt(BaseAddr,val) WriteRegBit(BaseAddr,I_CF_4,0,val)
//***********************I_T_C_L
#define WriteGIO(BaseAddr,val) WriteRegBit(BaseAddr,I_T_C_L,7,val)
#define ReadGIO(BaseAddr) CheckRegBit(BaseAddr,I_T_C_L,7)
#define ReadRX(BaseAddr) CheckRegBit(BaseAddr,I_T_C_L,3) //RO
#define WriteTX(BaseAddr,val) WriteRegBit(BaseAddr,I_T_C_L,0,val)
//***********************I_T_C_H
#define EnRX2(BaseAddr,val) WriteRegBit(BaseAddr,I_T_C_H,7,val)
#define ReadRX2(BaseAddr) CheckRegBit(BaseAddr,I_T_C_H,7)
//**********************Version
#define GetFIRVersion(BaseAddr) ReadReg(BaseAddr,VERSION)
void SetTimer(__u16 iobase, __u8 count)
{
EnTimerInt(iobase, OFF);
WriteReg(iobase, TIMER, count);
EnTimerInt(iobase, ON);
}
void SetSendByte(__u16 iobase, __u32 count)
{
__u32 low, high;
if ((count & 0xf000) == 0) {
low = count & 0x00ff;
high = (count & 0x0f00) >> 8;
WriteReg(iobase, TX_C_L, low);
WriteReg(iobase, TX_C_H, high);
}
}
void ResetChip(__u16 iobase, __u8 type)
{
__u8 value;
value = (type + 2) << 4;
WriteReg(iobase, RESET, type);
}
void SetAddrMode(__u16 iobase, __u8 mode)
{
__u8 bTmp = 0;
if (mode < 3) {
bTmp = (ReadReg(iobase, RX_CT) & 0xcf) | (mode << 4);
WriteReg(iobase, RX_CT, bTmp);
}
}
int CkRxRecv(__u16 iobase, struct via_ircc_cb *self)
{
__u8 low, high;
__u16 wTmp = 0, wTmp1 = 0, wTmp_new = 0;
low = ReadReg(iobase, RX_C_L);
high = ReadReg(iobase, RX_C_H);
wTmp1 = high;
wTmp = (wTmp1 << 8) | low;
udelay(10);
low = ReadReg(iobase, RX_C_L);
high = ReadReg(iobase, RX_C_H);
wTmp1 = high;
wTmp_new = (wTmp1 << 8) | low;
if (wTmp_new != wTmp)
return 1;
else
return 0;
}
__u16 RxCurCount(__u16 iobase, struct via_ircc_cb * self)
{
__u8 low, high;
__u16 wTmp = 0, wTmp1 = 0;
low = ReadReg(iobase, RX_P_L);
high = ReadReg(iobase, RX_P_H);
wTmp1 = high;
wTmp = (wTmp1 << 8) | low;
return wTmp;
}
/* This Routine can only use in recevie_complete
* for it will update last count.
*/
__u16 GetRecvByte(__u16 iobase, struct via_ircc_cb * self)
{
__u8 low, high;
__u16 wTmp, wTmp1, ret;
low = ReadReg(iobase, RX_P_L);
high = ReadReg(iobase, RX_P_H);
wTmp1 = high;
wTmp = (wTmp1 << 8) | low;
if (wTmp >= self->RxLastCount)
ret = wTmp - self->RxLastCount;
else
ret = (0x8000 - self->RxLastCount) + wTmp;
self->RxLastCount = wTmp;
/* RX_P is more actually the RX_C
low=ReadReg(iobase,RX_C_L);
high=ReadReg(iobase,RX_C_H);
if(!(high&0xe000)) {
temp=(high<<8)+low;
return temp;
}
else return 0;
*/
return ret;
}
__u16 GetRecvLen(__u16 iobase)
{
__u8 low, high;
__u16 temp;
low = ReadReg(iobase, RX_P_L);
high = ReadReg(iobase, RX_P_H);
if (!(high & 0xe000)) {
temp = (high << 8) + low;
return temp;
} else
return 0;
}
void Sdelay(__u16 scale)
{
__u8 bTmp;
int i, j;
for (j = 0; j < scale; j++) {
for (i = 0; i < 0x20; i++) {
bTmp = inb(0xeb);
outb(bTmp, 0xeb);
}
}
}
void Tdelay(__u16 scale)
{
__u8 bTmp;
int i, j;
for (j = 0; j < scale; j++) {
for (i = 0; i < 0x50; i++) {
bTmp = inb(0xeb);
outb(bTmp, 0xeb);
}
}
}
void ActClk(__u16 iobase, __u8 value)
{
__u8 bTmp;
bTmp = ReadReg(iobase, 0x34);
if (value)
WriteReg(iobase, 0x34, bTmp | Clk_bit);
else
WriteReg(iobase, 0x34, bTmp & ~Clk_bit);
}
void ActTx(__u16 iobase, __u8 value)
{
__u8 bTmp;
bTmp = ReadReg(iobase, 0x34);
if (value)
WriteReg(iobase, 0x34, bTmp | Tx_bit);
else
WriteReg(iobase, 0x34, bTmp & ~Tx_bit);
}
void ClkTx(__u16 iobase, __u8 Clk, __u8 Tx)
{
__u8 bTmp;
bTmp = ReadReg(iobase, 0x34);
if (Clk == 0)
bTmp &= ~Clk_bit;
else {
if (Clk == 1)
bTmp |= Clk_bit;
}
WriteReg(iobase, 0x34, bTmp);
Sdelay(1);
if (Tx == 0)
bTmp &= ~Tx_bit;
else {
if (Tx == 1)
bTmp |= Tx_bit;
}
WriteReg(iobase, 0x34, bTmp);
}
void Wr_Byte(__u16 iobase, __u8 data)
{
__u8 bData = data;
// __u8 btmp;
int i;
ClkTx(iobase, 0, 1);
Tdelay(2);
ActClk(iobase, 1);
Tdelay(1);
for (i = 0; i < 8; i++) { //LDN
if ((bData >> i) & 0x01) {
ClkTx(iobase, 0, 1); //bit data = 1;
} else {
ClkTx(iobase, 0, 0); //bit data = 1;
}
Tdelay(2);
Sdelay(1);
ActClk(iobase, 1); //clk hi
Tdelay(1);
}
}
__u8 Rd_Indx(__u16 iobase, __u8 addr, __u8 index)
{
__u8 data = 0, bTmp, data_bit;
int i;
bTmp = addr | (index << 1) | 0;
ClkTx(iobase, 0, 0);
Tdelay(2);
ActClk(iobase, 1);
udelay(1);
Wr_Byte(iobase, bTmp);
Sdelay(1);
ClkTx(iobase, 0, 0);
Tdelay(2);
for (i = 0; i < 10; i++) {
ActClk(iobase, 1);
Tdelay(1);
ActClk(iobase, 0);
Tdelay(1);
ClkTx(iobase, 0, 1);
Tdelay(1);
bTmp = ReadReg(iobase, 0x34);
if (!(bTmp & Rd_Valid))
break;
}
if (!(bTmp & Rd_Valid)) {
for (i = 0; i < 8; i++) {
ActClk(iobase, 1);
Tdelay(1);
ActClk(iobase, 0);
bTmp = ReadReg(iobase, 0x34);
data_bit = 1 << i;
if (bTmp & RxBit)
data |= data_bit;
else
data &= ~data_bit;
Tdelay(2);
}
} else {
for (i = 0; i < 2; i++) {
ActClk(iobase, 1);
Tdelay(1);
ActClk(iobase, 0);
Tdelay(2);
}
bTmp = ReadReg(iobase, 0x34);
}
for (i = 0; i < 1; i++) {
ActClk(iobase, 1);
Tdelay(1);
ActClk(iobase, 0);
Tdelay(2);
}
ClkTx(iobase, 0, 0);
Tdelay(1);
for (i = 0; i < 3; i++) {
ActClk(iobase, 1);
Tdelay(1);
ActClk(iobase, 0);
Tdelay(2);
}
return data;
}
void Wr_Indx(__u16 iobase, __u8 addr, __u8 index, __u8 data)
{
int i;
__u8 bTmp;
ClkTx(iobase, 0, 0);
udelay(2);
ActClk(iobase, 1);
udelay(1);
bTmp = addr | (index << 1) | 1;
Wr_Byte(iobase, bTmp);
Wr_Byte(iobase, data);
for (i = 0; i < 2; i++) {
ClkTx(iobase, 0, 0);
Tdelay(2);
ActClk(iobase, 1);
Tdelay(1);
}
ActClk(iobase, 0);
}
void ResetDongle(__u16 iobase)
{
int i;
ClkTx(iobase, 0, 0);
Tdelay(1);
for (i = 0; i < 30; i++) {
ActClk(iobase, 1);
Tdelay(1);
ActClk(iobase, 0);
Tdelay(1);
}
ActClk(iobase, 0);
}
void SetSITmode(__u16 iobase)
{
__u8 bTmp;
bTmp = ReadLPCReg(0x28);
WriteLPCReg(0x28, bTmp | 0x10); //select ITMOFF
bTmp = ReadReg(iobase, 0x35);
WriteReg(iobase, 0x35, bTmp | 0x40); // Driver ITMOFF
WriteReg(iobase, 0x28, bTmp | 0x80); // enable All interrupt
}
void SI_SetMode(__u16 iobase, int mode)
{
//__u32 dTmp;
__u8 bTmp;
WriteLPCReg(0x28, 0x70); // S/W Reset
SetSITmode(iobase);
ResetDongle(iobase);
udelay(10);
Wr_Indx(iobase, 0x40, 0x0, 0x17); //RX ,APEN enable,Normal power
Wr_Indx(iobase, 0x40, 0x1, mode); //Set Mode
Wr_Indx(iobase, 0x40, 0x2, 0xff); //Set power to FIR VFIR > 1m
bTmp = Rd_Indx(iobase, 0x40, 1);
}
void InitCard(__u16 iobase)
{
ResetChip(iobase, 5);
WriteReg(iobase, I_ST_CT_0, 0x00); // open CHIP on
SetSIRBOF(iobase, 0xc0); // hardware default value
SetSIREOF(iobase, 0xc1);
}
void CommonShutDown(__u16 iobase, __u8 TxDMA)
{
DisableDmaChannel(TxDMA);
}
void CommonInit(__u16 iobase)
{
// EnTXCRC(iobase,0);
SwapDMA(iobase, OFF);
SetMaxRxPacketSize(iobase, 0x0fff); //set to max:4095
EnRXFIFOReadyInt(iobase, OFF);
EnRXFIFOHalfLevelInt(iobase, OFF);
EnTXFIFOHalfLevelInt(iobase, OFF);
EnTXFIFOUnderrunEOMInt(iobase, ON);
// EnTXFIFOReadyInt(iobase,ON);
InvertTX(iobase, OFF);
InvertRX(iobase, OFF);
// WriteLPCReg(0xF0,0); //(if VT1211 then do this)
if (IsSIROn(iobase)) {
SIRFilter(iobase, ON);
SIRRecvAny(iobase, ON);
} else {
SIRFilter(iobase, OFF);
SIRRecvAny(iobase, OFF);
}
EnRXSpecInt(iobase, ON);
WriteReg(iobase, I_ST_CT_0, 0x80);
EnableDMA(iobase, ON);
}
void SetBaudRate(__u16 iobase, __u32 rate)
{
__u8 value = 11, temp;
if (IsSIROn(iobase)) {
switch (rate) {
case (__u32) (2400L):
value = 47;
break;
case (__u32) (9600L):
value = 11;
break;
case (__u32) (19200L):
value = 5;
break;
case (__u32) (38400L):
value = 2;
break;
case (__u32) (57600L):
value = 1;
break;
case (__u32) (115200L):
value = 0;
break;
default:
break;
};
} else if (IsMIROn(iobase)) {
value = 0; // will automatically be fixed in 1.152M
} else if (IsFIROn(iobase)) {
value = 0; // will automatically be fixed in 4M
}
temp = (ReadReg(iobase, I_CF_H_1) & 0x03);
temp = temp | (value << 2);
WriteReg(iobase, I_CF_H_1, temp);
}
void SetPulseWidth(__u16 iobase, __u8 width)
{
__u8 temp, temp1, temp2;
temp = (ReadReg(iobase, I_CF_L_1) & 0x1f);
temp1 = (ReadReg(iobase, I_CF_H_1) & 0xfc);
temp2 = (width & 0x07) << 5;
temp = temp | temp2;
temp2 = (width & 0x18) >> 3;
temp1 = temp1 | temp2;
WriteReg(iobase, I_CF_L_1, temp);
WriteReg(iobase, I_CF_H_1, temp1);
}
void SetSendPreambleCount(__u16 iobase, __u8 count)
{
__u8 temp;
temp = ReadReg(iobase, I_CF_L_1) & 0xe0;
temp = temp | count;
WriteReg(iobase, I_CF_L_1, temp);
}
void SetVFIR(__u16 BaseAddr, __u8 val)
{
__u8 tmp;
tmp = ReadReg(BaseAddr, I_CF_L_0);
WriteReg(BaseAddr, I_CF_L_0, tmp & 0x8f);
WriteRegBit(BaseAddr, I_CF_H_0, 5, val);
}
void SetFIR(__u16 BaseAddr, __u8 val)
{
__u8 tmp;
WriteRegBit(BaseAddr, I_CF_H_0, 5, 0);
tmp = ReadReg(BaseAddr, I_CF_L_0);
WriteReg(BaseAddr, I_CF_L_0, tmp & 0x8f);
WriteRegBit(BaseAddr, I_CF_L_0, 6, val);
}
void SetMIR(__u16 BaseAddr, __u8 val)
{
__u8 tmp;
WriteRegBit(BaseAddr, I_CF_H_0, 5, 0);
tmp = ReadReg(BaseAddr, I_CF_L_0);
WriteReg(BaseAddr, I_CF_L_0, tmp & 0x8f);
WriteRegBit(BaseAddr, I_CF_L_0, 5, val);
}
void SetSIR(__u16 BaseAddr, __u8 val)
{
__u8 tmp;
WriteRegBit(BaseAddr, I_CF_H_0, 5, 0);
tmp = ReadReg(BaseAddr, I_CF_L_0);
WriteReg(BaseAddr, I_CF_L_0, tmp & 0x8f);
WriteRegBit(BaseAddr, I_CF_L_0, 4, val);
}
void ClrHBusy(__u16 iobase)
{
EnableDMA(iobase, OFF);
EnableDMA(iobase, ON);
RXStart(iobase, OFF);
RXStart(iobase, ON);
RXStart(iobase, OFF);
EnableDMA(iobase, OFF);
EnableDMA(iobase, ON);
}
void SetFifo64(__u16 iobase)
{
WriteRegBit(iobase, I_CF_H_0, 0, 0);
WriteRegBit(iobase, I_CF_H_0, 7, 0);
}
#endif /* via_IRCC_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7