mmc: renesas_sdhi: don't overwrite TAP settings when HS400 tuning is complete

When HS400 tuning is complete and HS400 is going to be activated, we
have to keep the current number of TAPs and should not overwrite them
with a hardcoded value. This was probably a copy&paste mistake when
upporting HS400 support from the BSP.

Fixes: 26eb2607 ("mmc: renesas_sdhi: add eMMC HS400 mode support")
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220404114902.12175-1-wsa+renesas@sang-engineering.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/renesas_sdhi_core.c

@@ -396,10 +396,10 @@ static void renesas_sdhi_hs400_complete(struct mmc_host *mmc)
 			SH_MOBILE_SDHI_SCC_TMPPORT2_HS400OSEL) |
 			sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT2));
 
-	/* Set the sampling clock selection range of HS400 mode */
 	sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL,
 		       SH_MOBILE_SDHI_SCC_DTCNTL_TAPEN |
-		       0x4 << SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT);
+		       sd_scc_read32(host, priv,
+				     SH_MOBILE_SDHI_SCC_DTCNTL));
 
 	/* Avoid bad TAP */
 	if (bad_taps & BIT(priv->tap_set)) {