Commit 03fdfb26 authored by Marc Zyngier's avatar Marc Zyngier

KVM: arm64: Don't write junk to sysregs on reset

At the moment, the way we reset system registers is mildly insane:
We write junk to them, call the reset functions, and then check that
we have something else in them.

The "fun" thing is that this can happen while the guest is running
(PSCI, for example). If anything in KVM has to evaluate the state
of a system register while junk is in there, bad thing may happen.

Let's stop doing that. Instead, we track that we have called a
reset function for that register, and assume that the reset
function has done something. This requires fixing a couple of
sysreg refinition in the trap table.

In the end, the very need of this reset check is pretty dubious,
as it doesn't check everything (a lot of the sysregs leave outside of
the sys_regs[] array). It may well be axed in the near future.
Tested-by: default avatarZenghui Yu <yuzenghui@huawei.com>
Signed-off-by: default avatarMarc Zyngier <maz@kernel.org>
parent 5eeaf10e
......@@ -632,7 +632,7 @@ static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
*/
val = ((pmcr & ~ARMV8_PMU_PMCR_MASK)
| (ARMV8_PMU_PMCR_MASK & 0xdecafbad)) & (~ARMV8_PMU_PMCR_E);
__vcpu_sys_reg(vcpu, PMCR_EL0) = val;
__vcpu_sys_reg(vcpu, r->reg) = val;
}
static bool check_pmu_access_disabled(struct kvm_vcpu *vcpu, u64 flags)
......@@ -981,13 +981,13 @@ static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
/* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */
#define DBG_BCR_BVR_WCR_WVR_EL1(n) \
{ SYS_DESC(SYS_DBGBVRn_EL1(n)), \
trap_bvr, reset_bvr, n, 0, get_bvr, set_bvr }, \
trap_bvr, reset_bvr, 0, 0, get_bvr, set_bvr }, \
{ SYS_DESC(SYS_DBGBCRn_EL1(n)), \
trap_bcr, reset_bcr, n, 0, get_bcr, set_bcr }, \
trap_bcr, reset_bcr, 0, 0, get_bcr, set_bcr }, \
{ SYS_DESC(SYS_DBGWVRn_EL1(n)), \
trap_wvr, reset_wvr, n, 0, get_wvr, set_wvr }, \
trap_wvr, reset_wvr, 0, 0, get_wvr, set_wvr }, \
{ SYS_DESC(SYS_DBGWCRn_EL1(n)), \
trap_wcr, reset_wcr, n, 0, get_wcr, set_wcr }
trap_wcr, reset_wcr, 0, 0, get_wcr, set_wcr }
/* Macro to expand the PMEVCNTRn_EL0 register */
#define PMU_PMEVCNTR_EL0(n) \
......@@ -1540,7 +1540,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
{ SYS_DESC(SYS_CSSELR_EL1), access_csselr, reset_unknown, CSSELR_EL1 },
{ SYS_DESC(SYS_CTR_EL0), access_ctr },
{ SYS_DESC(SYS_PMCR_EL0), access_pmcr, reset_pmcr, },
{ SYS_DESC(SYS_PMCR_EL0), access_pmcr, reset_pmcr, PMCR_EL0 },
{ SYS_DESC(SYS_PMCNTENSET_EL0), access_pmcnten, reset_unknown, PMCNTENSET_EL0 },
{ SYS_DESC(SYS_PMCNTENCLR_EL0), access_pmcnten, NULL, PMCNTENSET_EL0 },
{ SYS_DESC(SYS_PMOVSCLR_EL0), access_pmovs, NULL, PMOVSSET_EL0 },
......@@ -2254,13 +2254,19 @@ static int emulate_sys_reg(struct kvm_vcpu *vcpu,
}
static void reset_sys_reg_descs(struct kvm_vcpu *vcpu,
const struct sys_reg_desc *table, size_t num)
const struct sys_reg_desc *table, size_t num,
unsigned long *bmap)
{
unsigned long i;
for (i = 0; i < num; i++)
if (table[i].reset)
if (table[i].reset) {
int reg = table[i].reg;
table[i].reset(vcpu, &table[i]);
if (reg > 0 && reg < NR_SYS_REGS)
set_bit(reg, bmap);
}
}
/**
......@@ -2774,18 +2780,16 @@ void kvm_reset_sys_regs(struct kvm_vcpu *vcpu)
{
size_t num;
const struct sys_reg_desc *table;
/* Catch someone adding a register without putting in reset entry. */
memset(&vcpu->arch.ctxt.sys_regs, 0x42, sizeof(vcpu->arch.ctxt.sys_regs));
DECLARE_BITMAP(bmap, NR_SYS_REGS) = { 0, };
/* Generic chip reset first (so target could override). */
reset_sys_reg_descs(vcpu, sys_reg_descs, ARRAY_SIZE(sys_reg_descs));
reset_sys_reg_descs(vcpu, sys_reg_descs, ARRAY_SIZE(sys_reg_descs), bmap);
table = get_target_table(vcpu->arch.target, true, &num);
reset_sys_reg_descs(vcpu, table, num);
reset_sys_reg_descs(vcpu, table, num, bmap);
for (num = 1; num < NR_SYS_REGS; num++) {
if (WARN(__vcpu_sys_reg(vcpu, num) == 0x4242424242424242,
if (WARN(!test_bit(num, bmap),
"Didn't reset __vcpu_sys_reg(%zi)\n", num))
break;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment