Skip to content

L
linux
Commit 043f275d authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'for-linus/2635-updates' of git://git.fluff.org/bjdooks/linux 

* 'for-linus/2635-updates' of git://git.fluff.org/bjdooks/linux:
  ARM: S5PV210: serial: Fix section mismatch warning
  ARM: s3c2410_defconfig: Add new machines
  ARM: s3c6400_defconfig: Add framebuffer and basic LCD
  ARM: s3c6400_defconfig: Add RTC driver support
  ARM: s3c6400_defconfig: Enable USB host side
  ARM: s3c6400_defconfig: Add SPI driver
  ARM: s3c6400_defconfig: Update compiled machines
  ARM: S5P: Regoster clk_xusbxti clock for hsotg driver
  ARM: S3C64XX: Add USB OTG HCLK to the list of clocks
  ARM: SAMSUNG: gpio-cfg.h: update documentation
  ARM: SAMSUNG: Documentation: add documentation on GPIO code
  ARM: SAMSUNG: Fix documentation for s3c_gpio_cfgpin()
  ARM: S3C24XX: Documentation: add section on gpiolib changes
  ARM: S3C24XX: Documentation: update GPIO documentation
  ARM: S3C24XX: Documentation: update documentation overview
  ARM: SAMSUNG: Documentation: update directory layout
  ARM: SAMSUNG: Documentation: update the list of SoCs supported
parents 72da3bc0 5d66ceee
Show whitespace changes
Inline Side-by-side
Showing with 594 additions and 40 deletions
Documentation/arm/Samsung-S3C24XX/GPIO.txt
View file @ 043f275d
...@@ -12,6 +12,8 @@ Introduction ...@@ -12,6 +12,8 @@ Introduction
of the s3c2410 GPIO system, please read the Samsung provided of the s3c2410 GPIO system, please read the Samsung provided
data-sheet/users manual to find out the complete list. data-sheet/users manual to find out the complete list.
See Documentation/arm/Samsung/GPIO.txt for the core implemetation.
GPIOLIB GPIOLIB
------- -------
...@@ -24,8 +26,60 @@ GPIOLIB ...@@ -24,8 +26,60 @@ GPIOLIB
listed below will be removed (they may be marked as __deprecated listed below will be removed (they may be marked as __deprecated
in the near future). in the near future).
- s3c2410_gpio_getpin The following functions now either have a s3c_ specific variant
- s3c2410_gpio_setpin or are merged into gpiolib. See the definitions in
arch/arm/plat-samsung/include/plat/gpio-cfg.h:
s3c2410_gpio_setpin() gpio_set_value() or gpio_direction_output()
s3c2410_gpio_getpin() gpio_get_value() or gpio_direction_input()
s3c2410_gpio_getirq() gpio_to_irq()
s3c2410_gpio_cfgpin() s3c_gpio_cfgpin()
s3c2410_gpio_getcfg() s3c_gpio_getcfg()
s3c2410_gpio_pullup() s3c_gpio_setpull()
GPIOLIB conversion
------------------
If you need to convert your board or driver to use gpiolib from the exiting
s3c2410 api, then here are some notes on the process.
1) If your board is exclusively using an GPIO, say to control peripheral
power, then it will require to claim the gpio with gpio_request() before
it can use it.
It is recommended to check the return value, with at least WARN_ON()
during initialisation.
2) The s3c2410_gpio_cfgpin() can be directly replaced with s3c_gpio_cfgpin()
as they have the same arguments, and can either take the pin specific
values, or the more generic special-function-number arguments.
3) s3c2410_gpio_pullup() changs have the problem that whilst the
s3c2410_gpio_pullup(x, 1) can be easily translated to the
s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0)
are not so easy.
The s3c2410_gpio_pullup(x, 0) case enables the pull-up (or in the case
of some of the devices, a pull-down) and as such the new API distinguishes
between the UP and DOWN case. There is currently no 'just turn on' setting
which may be required if this becomes a problem.
4) s3c2410_gpio_setpin() can be replaced by gpio_set_value(), the old call
does not implicitly configure the relevant gpio to output. The gpio
direction should be changed before using gpio_set_value().
5) s3c2410_gpio_getpin() is replaceable by gpio_get_value() if the pin
has been set to input. It is currently unknown what the behaviour is
when using gpio_get_value() on an output pin (s3c2410_gpio_getpin
would return the value the pin is supposed to be outputting).
6) s3c2410_gpio_getirq() should be directly replacable with the
gpio_to_irq() call.
The s3c2410_gpio and gpio_ calls have always operated on the same gpio
numberspace, so there is no problem with converting the gpio numbering
between the calls.
Headers Headers
...@@ -54,6 +108,11 @@ PIN Numbers ...@@ -54,6 +108,11 @@ PIN Numbers
eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
the GPIO functions which pin is to be used. the GPIO functions which pin is to be used.
With the conversion to gpiolib, there is no longer a direct conversion
from gpio pin number to register base address as in earlier kernels. This
is due to the number space required for newer SoCs where the later
GPIOs are not contiguous.
Configuring a pin Configuring a pin
----------------- -----------------
...@@ -71,6 +130,8 @@ Configuring a pin ...@@ -71,6 +130,8 @@ Configuring a pin
which would turn GPA(0) into the lowest Address line A0, and set which would turn GPA(0) into the lowest Address line A0, and set
GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line. GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
The s3c_gpio_cfgpin() call is a functional replacement for this call.
Reading the current configuration Reading the current configuration
--------------------------------- ---------------------------------
...@@ -82,6 +143,9 @@ Reading the current configuration ...@@ -82,6 +143,9 @@ Reading the current configuration
The return value will be from the same set of values which can be The return value will be from the same set of values which can be
passed to s3c2410_gpio_cfgpin(). passed to s3c2410_gpio_cfgpin().
The s3c_gpio_getcfg() call should be a functional replacement for
this call.
Configuring a pull-up resistor Configuring a pull-up resistor
------------------------------ ------------------------------
...@@ -95,6 +159,10 @@ Configuring a pull-up resistor ...@@ -95,6 +159,10 @@ Configuring a pull-up resistor
Where the to value is zero to set the pull-up off, and 1 to enable Where the to value is zero to set the pull-up off, and 1 to enable
the specified pull-up. Any other values are currently undefined. the specified pull-up. Any other values are currently undefined.
The s3c_gpio_setpull() offers similar functionality, but with the
ability to encode whether the pull is up or down. Currently there
is no 'just on' state, so up or down must be selected.
Getting the state of a PIN Getting the state of a PIN
-------------------------- --------------------------
...@@ -106,6 +174,9 @@ Getting the state of a PIN ...@@ -106,6 +174,9 @@ Getting the state of a PIN
This will return either zero or non-zero. Do not count on this This will return either zero or non-zero. Do not count on this
function returning 1 if the pin is set. function returning 1 if the pin is set.
This call is now implemented by the relevant gpiolib calls, convert
your board or driver to use gpiolib.
Setting the state of a PIN Setting the state of a PIN
-------------------------- --------------------------
...@@ -117,6 +188,9 @@ Setting the state of a PIN ...@@ -117,6 +188,9 @@ Setting the state of a PIN
Which sets the given pin to the value. Use 0 to write 0, and 1 to Which sets the given pin to the value. Use 0 to write 0, and 1 to
set the output to 1. set the output to 1.
This call is now implemented by the relevant gpiolib calls, convert
your board or driver to use gpiolib.
Getting the IRQ number associated with a PIN Getting the IRQ number associated with a PIN
-------------------------------------------- --------------------------------------------
...@@ -128,6 +202,9 @@ Getting the IRQ number associated with a PIN ...@@ -128,6 +202,9 @@ Getting the IRQ number associated with a PIN
Note, not all pins have an IRQ. Note, not all pins have an IRQ.
This call is now implemented by the relevant gpiolib calls, convert
your board or driver to use gpiolib.
Authour Authour
------- -------
......
Documentation/arm/Samsung-S3C24XX/Overview.txt
View file @ 043f275d
...@@ -8,10 +8,16 @@ Introduction ...@@ -8,10 +8,16 @@ Introduction
The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
by the 's3c2410' architecture of ARM Linux. Currently the S3C2410, by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
S3C2412, S3C2413, S3C2440, S3C2442 and S3C2443 devices are supported. S3C2412, S3C2413, S3C2416 S3C2440, S3C2442, S3C2443 and S3C2450 devices
are supported.
Support for the S3C2400 and S3C24A0 series are in progress. Support for the S3C2400 and S3C24A0 series are in progress.
The S3C2416 and S3C2450 devices are very similar and S3C2450 support is
included under the arch/arm/mach-s3c2416 directory. Note, whilst core
support for these SoCs is in, work on some of the extra peripherals
and extra interrupts is still ongoing.
Configuration Configuration
------------- -------------
...@@ -209,6 +215,13 @@ GPIO ...@@ -209,6 +215,13 @@ GPIO
Newer kernels carry GPIOLIB, and support is being moved towards Newer kernels carry GPIOLIB, and support is being moved towards
this with some of the older support in line to be removed. this with some of the older support in line to be removed.
As of v2.6.34, the move towards using gpiolib support is almost
complete, and very little of the old calls are left.
See Documentation/arm/Samsung-S3C24XX/GPIO.txt for the S3C24XX specific
support and Documentation/arm/Samsung/GPIO.txt for the core Samsung
implementation.
Clock Management Clock Management
---------------- ----------------
......
Documentation/arm/Samsung/GPIO.txt 0 → 100644
View file @ 043f275d
Samsung GPIO implementation
===========================
Introduction
------------
This outlines the Samsung GPIO implementation and the architecture
specfic calls provided alongisde the drivers/gpio core.
S3C24XX (Legacy)
----------------
See Documentation/arm/Samsung-S3C24XX/GPIO.txt for more information
about these devices. Their implementation is being brought into line
with the core samsung implementation described in this document.
GPIOLIB integration
-------------------
The gpio implementation uses gpiolib as much as possible, only providing
specific calls for the items that require Samsung specific handling, such
as pin special-function or pull resistor control.
GPIO numbering is synchronised between the Samsung and gpiolib system.
PIN configuration
-----------------
Pin configuration is specific to the Samsung architecutre, with each SoC
registering the necessary information for the core gpio configuration
implementation to configure pins as necessary.
The s3c_gpio_cfgpin() and s3c_gpio_setpull() provide the means for a
driver or machine to change gpio configuration.
See arch/arm/plat-samsung/include/plat/gpio-cfg.h for more information
on these functions.
Documentation/arm/Samsung/Overview.txt
View file @ 043f275d
...@@ -13,9 +13,10 @@ Introduction ...@@ -13,9 +13,10 @@ Introduction
- S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
- S3C64XX: S3C6400 and S3C6410 - S3C64XX: S3C6400 and S3C6410
- S5PC6440 - S5P6440
- S5P6442
S5PC100 and S5PC110 support is currently being merged - S5PC100
- S5PC110 / S5PV210
S3C24XX Systems S3C24XX Systems
...@@ -35,7 +36,10 @@ Configuration ...@@ -35,7 +36,10 @@ Configuration
unifying all the SoCs into one kernel. unifying all the SoCs into one kernel.
s5p6440_defconfig - S5P6440 specific default configuration s5p6440_defconfig - S5P6440 specific default configuration
s5p6442_defconfig - S5P6442 specific default configuration
s5pc100_defconfig - S5PC100 specific default configuration s5pc100_defconfig - S5PC100 specific default configuration
s5pc110_defconfig - S5PC110 specific default configuration
s5pv210_defconfig - S5PV210 specific default configuration
Layout Layout
...@@ -50,18 +54,27 @@ Layout ...@@ -50,18 +54,27 @@ Layout
specific information. It contains the base clock, GPIO and device definitions specific information. It contains the base clock, GPIO and device definitions
to get the system running. to get the system running.
plat-s3c is the s3c24xx/s3c64xx platform directory, although it is currently
involved in other builds this will be phased out once the relevant code is
moved elsewhere.
plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs. plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs.
plat-s3c64xx is for the s3c64xx specific bits, see the S3C24XX docs. plat-s5p is for s5p specific builds, and contains common support for the
S5P specific systems. Not all S5Ps use all the features in this directory
due to differences in the hardware.
Layout changes
--------------
The old plat-s3c and plat-s5pc1xx directories have been removed, with
support moved to either plat-samsung or plat-s5p as necessary. These moves
where to simplify the include and dependency issues involved with having
so many different platform directories.
plat-s5p is for s5p specific builds, more to be added. It was decided to remove plat-s5pc1xx as some of the support was already
in plat-s5p or plat-samsung, with the S5PC110 support added with S5PV210
the only user was the S5PC100. The S5PC100 specific items where moved to
arch/arm/mach-s5pc100.
[ to finish ]
Port Contributors Port Contributors
......
arch/arm/configs/s3c2410_defconfig
View file @ 043f275d
# #
# Automatically generated make config: don't edit # Automatically generated make config: don't edit
# Linux kernel version: 2.6.34 # Linux kernel version: 2.6.34
# Wed May 26 19:04:29 2010 # Fri May 28 19:15:48 2010
# #
CONFIG_ARM=y CONFIG_ARM=y
CONFIG_HAVE_PWM=y CONFIG_HAVE_PWM=y
...@@ -250,12 +250,15 @@ CONFIG_S3C_BOOT_UART_FORCE_FIFO=y ...@@ -250,12 +250,15 @@ CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
CONFIG_S3C_LOWLEVEL_UART_PORT=0 CONFIG_S3C_LOWLEVEL_UART_PORT=0
CONFIG_SAMSUNG_CLKSRC=y CONFIG_SAMSUNG_CLKSRC=y
CONFIG_S3C_GPIO_CFG_S3C24XX=y CONFIG_S3C_GPIO_CFG_S3C24XX=y
CONFIG_S3C_GPIO_PULL_UPDOWN=y
CONFIG_S3C_GPIO_PULL_UP=y CONFIG_S3C_GPIO_PULL_UP=y
CONFIG_SAMSUNG_GPIO_EXTRA=0 CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_S3C_GPIO_SPACE=0 CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_ADC=y CONFIG_S3C_ADC=y
CONFIG_S3C_DEV_HSMMC=y CONFIG_S3C_DEV_HSMMC=y
CONFIG_S3C_DEV_HSMMC1=y
CONFIG_S3C_DEV_HWMON=y CONFIG_S3C_DEV_HWMON=y
CONFIG_S3C_DEV_FB=y
CONFIG_S3C_DEV_USB_HOST=y CONFIG_S3C_DEV_USB_HOST=y
CONFIG_S3C_DEV_WDT=y CONFIG_S3C_DEV_WDT=y
CONFIG_S3C_DEV_NAND=y CONFIG_S3C_DEV_NAND=y
...@@ -322,11 +325,13 @@ CONFIG_MACH_SMDK2413=y ...@@ -322,11 +325,13 @@ CONFIG_MACH_SMDK2413=y
CONFIG_MACH_S3C2413=y CONFIG_MACH_S3C2413=y
CONFIG_MACH_SMDK2412=y CONFIG_MACH_SMDK2412=y
CONFIG_MACH_VSTMS=y CONFIG_MACH_VSTMS=y
CONFIG_CPU_S3C2416=y
CONFIG_S3C2416_DMA=y
# #
# S3C2416 Machines # S3C2416 Machines
# #
# CONFIG_MACH_SMDK2416 is not set CONFIG_MACH_SMDK2416=y
CONFIG_CPU_S3C2440=y CONFIG_CPU_S3C2440=y
CONFIG_CPU_S3C2442=y CONFIG_CPU_S3C2442=y
CONFIG_CPU_S3C244X=y CONFIG_CPU_S3C244X=y
...@@ -338,9 +343,9 @@ CONFIG_S3C2440_DMA=y ...@@ -338,9 +343,9 @@ CONFIG_S3C2440_DMA=y
# S3C2440 and S3C2442 Machines # S3C2440 and S3C2442 Machines
# #
CONFIG_MACH_ANUBIS=y CONFIG_MACH_ANUBIS=y
# CONFIG_MACH_NEO1973_GTA02 is not set CONFIG_MACH_NEO1973_GTA02=y
CONFIG_MACH_OSIRIS=y CONFIG_MACH_OSIRIS=y
# CONFIG_MACH_OSIRIS_DVS is not set CONFIG_MACH_OSIRIS_DVS=m
CONFIG_MACH_RX3715=y CONFIG_MACH_RX3715=y
CONFIG_ARCH_S3C2440=y CONFIG_ARCH_S3C2440=y
CONFIG_MACH_NEXCODER_2440=y CONFIG_MACH_NEXCODER_2440=y
...@@ -348,7 +353,7 @@ CONFIG_SMDK2440_CPU2440=y ...@@ -348,7 +353,7 @@ CONFIG_SMDK2440_CPU2440=y
CONFIG_SMDK2440_CPU2442=y CONFIG_SMDK2440_CPU2442=y
CONFIG_MACH_AT2440EVB=y CONFIG_MACH_AT2440EVB=y
CONFIG_MACH_MINI2440=y CONFIG_MACH_MINI2440=y
# CONFIG_MACH_RX1950 is not set CONFIG_MACH_RX1950=y
CONFIG_CPU_S3C2443=y CONFIG_CPU_S3C2443=y
CONFIG_S3C2443_DMA=y CONFIG_S3C2443_DMA=y
...@@ -1302,6 +1307,7 @@ CONFIG_INPUT_POWERMATE=m ...@@ -1302,6 +1307,7 @@ CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF50633_PMU is not set
# CONFIG_INPUT_PCF8574 is not set # CONFIG_INPUT_PCF8574 is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
...@@ -1490,7 +1496,16 @@ CONFIG_GPIOLIB=y ...@@ -1490,7 +1496,16 @@ CONFIG_GPIOLIB=y
# AC97 GPIO expanders: # AC97 GPIO expanders:
# #
# CONFIG_W1 is not set # CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_APM_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_CHARGER_PCF50633 is not set
CONFIG_HWMON=y CONFIG_HWMON=y
CONFIG_HWMON_VID=m CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_HWMON_DEBUG_CHIP is not set
...@@ -1607,7 +1622,7 @@ CONFIG_MFD_SM501=y ...@@ -1607,7 +1622,7 @@ CONFIG_MFD_SM501=y
# CONFIG_HTC_PASIC3 is not set # CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set # CONFIG_HTC_I2CPLD is not set
# CONFIG_UCB1400_CORE is not set # CONFIG_UCB1400_CORE is not set
# CONFIG_TPS65010 is not set CONFIG_TPS65010=m
# CONFIG_TWL4030_CORE is not set # CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set # CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_T7L66XB is not set
...@@ -1620,8 +1635,10 @@ CONFIG_MFD_SM501=y ...@@ -1620,8 +1635,10 @@ CONFIG_MFD_SM501=y
# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set CONFIG_MFD_PCF50633=y
# CONFIG_MFD_MC13783 is not set # CONFIG_MFD_MC13783 is not set
# CONFIG_PCF50633_ADC is not set
CONFIG_PCF50633_GPIO=y
# CONFIG_AB3100_CORE is not set # CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set # CONFIG_EZX_PCAP is not set
# CONFIG_AB4500_CORE is not set # CONFIG_AB4500_CORE is not set
...@@ -1737,6 +1754,7 @@ CONFIG_SND_S3C24XX_SOC_I2S=y ...@@ -1737,6 +1754,7 @@ CONFIG_SND_S3C24XX_SOC_I2S=y
CONFIG_SND_S3C_I2SV2_SOC=m CONFIG_SND_S3C_I2SV2_SOC=m
CONFIG_SND_S3C2412_SOC_I2S=m CONFIG_SND_S3C2412_SOC_I2S=m
CONFIG_SND_S3C_SOC_AC97=m CONFIG_SND_S3C_SOC_AC97=m
# CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753 is not set
CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m
CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m
CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m
...@@ -2045,6 +2063,7 @@ CONFIG_RTC_INTF_DEV=y ...@@ -2045,6 +2063,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set # CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_PCF50633 is not set
# #
# on-CPU RTC drivers # on-CPU RTC drivers
......
arch/arm/configs/s3c6400_defconfig
View file @ 043f275d
# #
# Automatically generated make config: don't edit # Automatically generated make config: don't edit
# Linux kernel version: 2.6.34 # Linux kernel version: 2.6.34
# Wed May 26 19:04:30 2010 # Fri May 28 19:05:39 2010
# #
CONFIG_ARM=y CONFIG_ARM=y
CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME=y
...@@ -253,12 +254,15 @@ CONFIG_S3C_GPIO_TRACK=y ...@@ -253,12 +254,15 @@ CONFIG_S3C_GPIO_TRACK=y
# CONFIG_S3C_ADC is not set # CONFIG_S3C_ADC is not set
CONFIG_S3C_DEV_HSMMC=y CONFIG_S3C_DEV_HSMMC=y
CONFIG_S3C_DEV_HSMMC1=y CONFIG_S3C_DEV_HSMMC1=y
CONFIG_S3C_DEV_HSMMC2=y
CONFIG_S3C_DEV_HWMON=y
CONFIG_S3C_DEV_I2C1=y CONFIG_S3C_DEV_I2C1=y
CONFIG_S3C_DEV_FB=y CONFIG_S3C_DEV_FB=y
CONFIG_S3C_DEV_USB_HOST=y CONFIG_S3C_DEV_USB_HOST=y
CONFIG_S3C_DEV_USB_HSOTG=y CONFIG_S3C_DEV_USB_HSOTG=y
CONFIG_S3C_DEV_WDT=y CONFIG_S3C_DEV_WDT=y
CONFIG_S3C_DEV_NAND=y CONFIG_S3C_DEV_NAND=y
CONFIG_S3C_DEV_RTC=y
CONFIG_SAMSUNG_DEV_ADC=y CONFIG_SAMSUNG_DEV_ADC=y
CONFIG_SAMSUNG_DEV_TS=y CONFIG_SAMSUNG_DEV_TS=y
CONFIG_S3C_DMA=y CONFIG_S3C_DMA=y
...@@ -271,6 +275,7 @@ CONFIG_S3C_DMA=y ...@@ -271,6 +275,7 @@ CONFIG_S3C_DMA=y
# CONFIG_SAMSUNG_PM_CHECK is not set # CONFIG_SAMSUNG_PM_CHECK is not set
CONFIG_SAMSUNG_WAKEMASK=y CONFIG_SAMSUNG_WAKEMASK=y
CONFIG_PLAT_S3C64XX=y CONFIG_PLAT_S3C64XX=y
CONFIG_CPU_S3C6400=y
CONFIG_CPU_S3C6410=y CONFIG_CPU_S3C6410=y
CONFIG_S3C64XX_DMA=y CONFIG_S3C64XX_DMA=y
CONFIG_S3C64XX_SETUP_SDHCI=y CONFIG_S3C64XX_SETUP_SDHCI=y
...@@ -278,17 +283,18 @@ CONFIG_S3C64XX_SETUP_I2C0=y ...@@ -278,17 +283,18 @@ CONFIG_S3C64XX_SETUP_I2C0=y
CONFIG_S3C64XX_SETUP_I2C1=y CONFIG_S3C64XX_SETUP_I2C1=y
CONFIG_S3C64XX_SETUP_FB_24BPP=y CONFIG_S3C64XX_SETUP_FB_24BPP=y
CONFIG_S3C64XX_SETUP_SDHCI_GPIO=y CONFIG_S3C64XX_SETUP_SDHCI_GPIO=y
# CONFIG_MACH_SMDK6400 is not set CONFIG_MACH_SMDK6400=y
# CONFIG_MACH_ANW6410 is not set CONFIG_MACH_ANW6410=y
CONFIG_MACH_SMDK6410=y CONFIG_MACH_SMDK6410=y
CONFIG_SMDK6410_SD_CH0=y CONFIG_SMDK6410_SD_CH0=y
# CONFIG_SMDK6410_SD_CH1 is not set # CONFIG_SMDK6410_SD_CH1 is not set
# CONFIG_SMDK6410_WM1190_EV1 is not set # CONFIG_SMDK6410_WM1190_EV1 is not set
# CONFIG_SMDK6410_WM1192_EV1 is not set # CONFIG_SMDK6410_WM1192_EV1 is not set
# CONFIG_MACH_NCP is not set CONFIG_MACH_NCP=y
# CONFIG_MACH_HMT is not set CONFIG_MACH_HMT=y
# CONFIG_MACH_SMARTQ5 is not set CONFIG_MACH_SMARTQ=y
# CONFIG_MACH_SMARTQ7 is not set CONFIG_MACH_SMARTQ5=y
CONFIG_MACH_SMARTQ7=y
# #
# Processor Type # Processor Type
...@@ -475,6 +481,9 @@ CONFIG_MTD_CFI_I2=y ...@@ -475,6 +481,9 @@ CONFIG_MTD_CFI_I2=y
# #
# Self-contained MTD device drivers # Self-contained MTD device drivers
# #
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set # CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set # CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set # CONFIG_MTD_MTDRAM is not set
...@@ -501,6 +510,7 @@ CONFIG_MTD_NAND_S3C2410=y ...@@ -501,6 +510,7 @@ CONFIG_MTD_NAND_S3C2410=y
# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set # CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set # CONFIG_MTD_ONENAND is not set
# #
...@@ -521,6 +531,7 @@ CONFIG_BLK_DEV_LOOP=y ...@@ -521,6 +531,7 @@ CONFIG_BLK_DEV_LOOP=y
# #
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected # DRBD disabled because PROC_FS, INET or CONNECTOR not selected
# #
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_SIZE=4096
...@@ -534,12 +545,14 @@ CONFIG_MISC_DEVICES=y ...@@ -534,12 +545,14 @@ CONFIG_MISC_DEVICES=y
# CONFIG_ISL29003 is not set # CONFIG_ISL29003 is not set
# CONFIG_SENSORS_TSL2550 is not set # CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set # CONFIG_C2PORT is not set
# #
# EEPROM support # EEPROM support
# #
CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set # CONFIG_EEPROM_93CX6 is not set
...@@ -654,6 +667,7 @@ CONFIG_SERIAL_SAMSUNG_UARTS=4 ...@@ -654,6 +667,7 @@ CONFIG_SERIAL_SAMSUNG_UARTS=4
# CONFIG_SERIAL_SAMSUNG_DEBUG is not set # CONFIG_SERIAL_SAMSUNG_DEBUG is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_S3C6400=y CONFIG_SERIAL_S3C6400=y
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_TIMBERDALE is not set
...@@ -694,6 +708,7 @@ CONFIG_I2C_S3C2410=y ...@@ -694,6 +708,7 @@ CONFIG_I2C_S3C2410=y
# #
# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
# #
# Other I2C/SMBus bus drivers # Other I2C/SMBus bus drivers
...@@ -703,7 +718,24 @@ CONFIG_I2C_S3C2410=y ...@@ -703,7 +718,24 @@ CONFIG_I2C_S3C2410=y
# CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_GPIO=m
CONFIG_SPI_S3C64XX=m
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# #
# PPS support # PPS support
...@@ -735,6 +767,9 @@ CONFIG_GPIOLIB=y ...@@ -735,6 +767,9 @@ CONFIG_GPIOLIB=y
# #
# SPI GPIO expanders: # SPI GPIO expanders:
# #
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# #
# AC97 GPIO expanders: # AC97 GPIO expanders:
...@@ -750,6 +785,7 @@ CONFIG_HWMON=y ...@@ -750,6 +785,7 @@ CONFIG_HWMON=y
# #
# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1026 is not set
...@@ -771,6 +807,7 @@ CONFIG_HWMON=y ...@@ -771,6 +807,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM77 is not set
...@@ -785,6 +822,7 @@ CONFIG_HWMON=y ...@@ -785,6 +822,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87360 is not set
...@@ -796,6 +834,7 @@ CONFIG_HWMON=y ...@@ -796,6 +834,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP401 is not set
...@@ -809,6 +848,7 @@ CONFIG_HWMON=y ...@@ -809,6 +848,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set # CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set # CONFIG_WATCHDOG is not set
...@@ -845,7 +885,10 @@ CONFIG_SSB_POSSIBLE=y ...@@ -845,7 +885,10 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set # CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set # CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set # CONFIG_MEDIA_SUPPORT is not set
...@@ -854,8 +897,47 @@ CONFIG_SSB_POSSIBLE=y ...@@ -854,8 +897,47 @@ CONFIG_SSB_POSSIBLE=y
# #
# CONFIG_VGASTATE is not set # CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set CONFIG_FB=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_S3C=y
# CONFIG_FB_S3C_DEBUG_REGWRITE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
CONFIG_LCD_LTV350QV=y
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PWM=y
# #
# Display device support # Display device support
...@@ -867,6 +949,8 @@ CONFIG_SSB_POSSIBLE=y ...@@ -867,6 +949,8 @@ CONFIG_SSB_POSSIBLE=y
# #
# CONFIG_VGA_CONSOLE is not set # CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=y CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SOUND_OSS_CORE_PRECLAIM=y
...@@ -895,6 +979,11 @@ CONFIG_SND_DRIVERS=y ...@@ -895,6 +979,11 @@ CONFIG_SND_DRIVERS=y
# CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set # CONFIG_SND_MPU401 is not set
CONFIG_SND_ARM=y CONFIG_SND_ARM=y
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_SOC=m CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_S3C24XX_SOC=m CONFIG_SND_S3C24XX_SOC=m
...@@ -909,29 +998,197 @@ CONFIG_AC97_BUS=m ...@@ -909,29 +998,197 @@ CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y CONFIG_HID_SUPPORT=y
CONFIG_HID=y CONFIG_HID=y
# CONFIG_HIDRAW is not set # CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set # CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
# #
# Special HID drivers # Special HID drivers
# #
# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
# CONFIG_HID_CANDO is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EGALAX is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT_KONE is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_STANTUM is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
# #
# Enable Host or Gadget support to see Inventra options # Miscellaneous USB options
# #
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
# #
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
# #
#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set # CONFIG_USB_GADGET is not set
# #
# OTG and related infrastructure # OTG and related infrastructure
# #
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ULPI is not set
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y CONFIG_MMC=y
CONFIG_MMC_DEBUG=y CONFIG_MMC_DEBUG=y
CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_UNSAFE_RESUME=y
...@@ -951,11 +1208,77 @@ CONFIG_MMC_SDHCI=y ...@@ -951,11 +1208,77 @@ CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_PLTFM is not set # CONFIG_MMC_SDHCI_PLTFM is not set
CONFIG_MMC_SDHCI_S3C=y CONFIG_MMC_SDHCI_S3C=y
# CONFIG_MMC_SDHCI_S3C_DMA is not set # CONFIG_MMC_SDHCI_S3C_DMA is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set # CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set # CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set # CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_S3C=y
# CONFIG_DMADEVICES is not set # CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set # CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set # CONFIG_UIO is not set
...@@ -1052,7 +1375,46 @@ CONFIG_ROMFS_ON_BLOCK=y ...@@ -1052,7 +1375,46 @@ CONFIG_ROMFS_ON_BLOCK=y
# #
# CONFIG_PARTITION_ADVANCED is not set # CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# #
# Kernel hacking # Kernel hacking
......
arch/arm/mach-s3c64xx/clock.c
View file @ 043f275d
...@@ -258,6 +258,12 @@ static struct clk init_clocks[] = { ...@@ -258,6 +258,12 @@ static struct clk init_clocks[] = {
.parent = &clk_h, .parent = &clk_h,
.enable = s3c64xx_hclk_ctrl, .enable = s3c64xx_hclk_ctrl,
.ctrlbit = S3C_CLKCON_HCLK_HSMMC2, .ctrlbit = S3C_CLKCON_HCLK_HSMMC2,
}, {
.name = "otg",
.id = -1,
.parent = &clk_h,
.enable = s3c64xx_hclk_ctrl,
.ctrlbit = S3C_CLKCON_HCLK_USB,
}, { }, {
.name = "timers", .name = "timers",
.id = -1, .id = -1,
......
arch/arm/plat-s5p/clock.c
View file @ 043f275d
...@@ -148,6 +148,7 @@ static struct clk *s5p_clks[] __initdata = { ...@@ -148,6 +148,7 @@ static struct clk *s5p_clks[] __initdata = {
&clk_fout_vpll, &clk_fout_vpll,
&clk_arm, &clk_arm,
&clk_vpll, &clk_vpll,
&clk_xusbxti,
}; };
void __init s5p_register_clocks(unsigned long xtal_freq) void __init s5p_register_clocks(unsigned long xtal_freq)
......
arch/arm/plat-samsung/include/plat/gpio-cfg.h
View file @ 043f275d
...@@ -43,6 +43,11 @@ struct s3c_gpio_chip; ...@@ -43,6 +43,11 @@ struct s3c_gpio_chip;
* layouts. Provide an point to vector control routine and provide any * layouts. Provide an point to vector control routine and provide any
* per-bank configuration information that other systems such as the * per-bank configuration information that other systems such as the
* external interrupt code will need. * external interrupt code will need.
*
* @sa s3c_gpio_cfgpin
* @sa s3c_gpio_getcfg
* @sa s3c_gpio_setpull
* @sa s3c_gpio_getpull
*/ */
struct s3c_gpio_cfg { struct s3c_gpio_cfg {
unsigned int cfg_eint; unsigned int cfg_eint;
...@@ -70,11 +75,25 @@ struct s3c_gpio_cfg { ...@@ -70,11 +75,25 @@ struct s3c_gpio_cfg {
/** /**
* s3c_gpio_cfgpin() - Change the GPIO function of a pin. * s3c_gpio_cfgpin() - Change the GPIO function of a pin.
* @pin pin The pin number to configure. * @pin pin The pin number to configure.
* @pin to The configuration for the pin's function. * @to to The configuration for the pin's function.
* *
* Configure which function is actually connected to the external * Configure which function is actually connected to the external
* pin, such as an gpio input, output or some form of special function * pin, such as an gpio input, output or some form of special function
* connected to an internal peripheral block. * connected to an internal peripheral block.
*
* The @to parameter can be one of the generic S3C_GPIO_INPUT, S3C_GPIO_OUTPUT
* or S3C_GPIO_SFN() to indicate one of the possible values that the helper
* will then generate the correct bit mask and shift for the configuration.
*
* If a bank of GPIOs all needs to be set to special-function 2, then
* the following code will work:
*
* for (gpio = start; gpio < end; gpio++)
* s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
*
* The @to parameter can also be a specific value already shifted to the
* correct position in the control register, although these are discouraged
* in newer kernels and are only being kept for compatibility.
*/ */
extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to); extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
...@@ -108,6 +127,8 @@ extern unsigned s3c_gpio_getcfg(unsigned int pin); ...@@ -108,6 +127,8 @@ extern unsigned s3c_gpio_getcfg(unsigned int pin);
* This function sets the state of the pull-{up,down} resistor for the * This function sets the state of the pull-{up,down} resistor for the
* specified pin. It will return 0 if successfull, or a negative error * specified pin. It will return 0 if successfull, or a negative error
* code if the pin cannot support the requested pull setting. * code if the pin cannot support the requested pull setting.
*
* @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
*/ */
extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull); extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
......
drivers/serial/s5pv210.c
View file @ 043f275d
...@@ -119,7 +119,7 @@ static int s5p_serial_probe(struct platform_device *pdev) ...@@ -119,7 +119,7 @@ static int s5p_serial_probe(struct platform_device *pdev)
return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]); return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]);
} }
static struct platform_driver s5p_serial_drv = { static struct platform_driver s5p_serial_driver = {
.probe = s5p_serial_probe, .probe = s5p_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove), .remove = __devexit_p(s3c24xx_serial_remove),
.driver = { .driver = {
...@@ -130,19 +130,19 @@ static struct platform_driver s5p_serial_drv = { ...@@ -130,19 +130,19 @@ static struct platform_driver s5p_serial_drv = {
static int __init s5pv210_serial_console_init(void) static int __init s5pv210_serial_console_init(void)
{ {
return s3c24xx_serial_initconsole(&s5p_serial_drv, s5p_uart_inf); return s3c24xx_serial_initconsole(&s5p_serial_driver, s5p_uart_inf);
} }
console_initcall(s5pv210_serial_console_init); console_initcall(s5pv210_serial_console_init);
static int __init s5p_serial_init(void) static int __init s5p_serial_init(void)
{ {
return s3c24xx_serial_init(&s5p_serial_drv, *s5p_uart_inf); return s3c24xx_serial_init(&s5p_serial_driver, *s5p_uart_inf);
} }
static void __exit s5p_serial_exit(void) static void __exit s5p_serial_exit(void)
{ {
platform_driver_unregister(&s5p_serial_drv); platform_driver_unregister(&s5p_serial_driver);
} }
module_init(s5p_serial_init); module_init(s5p_serial_init);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7