octeontx2-pf: Remove xdp queues on program detach

XDP queues are created/destroyed when a XDP program
is attached/detached. In current driver xdp_queues are not
getting destroyed on program exit due to incorrect xdp_queue
and tot_tx_queue count values.

This patch fixes the issue by setting tot_tx_queue and xdp_queue
count to correct values. It also fixes xdp.data_hard_start address.

Fixes: 06059a1a ("octeontx2-pf: Add XDP support to netdev PF")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Link: https://lore.kernel.org/r/20240130120610.16673-1-gakula@marvell.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c

@@ -314,7 +314,6 @@ static int otx2_set_channels(struct net_device *dev,
 	pfvf->hw.tx_queues = channel->tx_count;
 	if (pfvf->xdp_prog)
 		pfvf->hw.xdp_queues = channel->rx_count;
-	pfvf->hw.non_qos_queues =  pfvf->hw.tx_queues + pfvf->hw.xdp_queues;
 
 	if (if_up)
 		err = dev->netdev_ops->ndo_open(dev);

drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c

@@ -1744,6 +1744,7 @@ int otx2_open(struct net_device *netdev)
 	/* RQ and SQs are mapped to different CQs,
 	 * so find out max CQ IRQs (i.e CINTs) needed.
 	 */
+	pf->hw.non_qos_queues =  pf->hw.tx_queues + pf->hw.xdp_queues;
 	pf->hw.cint_cnt = max3(pf->hw.rx_queues, pf->hw.tx_queues,
 			       pf->hw.tc_tx_queues);
 
@@ -2643,8 +2644,6 @@ static int otx2_xdp_setup(struct otx2_nic *pf, struct bpf_prog *prog)
 		xdp_features_clear_redirect_target(dev);
 	}
 
-	pf->hw.non_qos_queues += pf->hw.xdp_queues;
-
 	if (if_up)
 		otx2_open(pf->netdev);
 

drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c

@@ -1403,7 +1403,7 @@ static bool otx2_xdp_rcv_pkt_handler(struct otx2_nic *pfvf,
 				     struct otx2_cq_queue *cq,
 				     bool *need_xdp_flush)
 {
-	unsigned char *hard_start, *data;
+	unsigned char *hard_start;
 	int qidx = cq->cq_idx;
 	struct xdp_buff xdp;
 	struct page *page;
@@ -1417,9 +1417,8 @@ static bool otx2_xdp_rcv_pkt_handler(struct otx2_nic *pfvf,
 
 	xdp_init_buff(&xdp, pfvf->rbsize, &cq->xdp_rxq);
 
-	data = (unsigned char *)phys_to_virt(pa);
-	hard_start = page_address(page);
-	xdp_prepare_buff(&xdp, hard_start, data - hard_start,
+	hard_start = (unsigned char *)phys_to_virt(pa);
+	xdp_prepare_buff(&xdp, hard_start, OTX2_HEAD_ROOM,
 			 cqe->sg.seg_size, false);
 
 	act = bpf_prog_run_xdp(prog, &xdp);