Commit 054e532f authored by Kamal Dasu's avatar Kamal Dasu Committed by Mark Brown

spi: bcm-qspi: Remove hardcoded settings and spi-nor.h dependency

The newly added broadcom qspi driver in drivers/spi produces a build
warning when CONFIG_MTD is disabled:
include/linux/mtd/cfi.h:76:2: #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. [-Werror=cpp]

There has been discussion on this in the link provided below. This fix in
SPI controller drivers implementing the ->spi_flash_read handler, now uses the
settings provided inside the 'struct spi_flash_read_message' parameter instead
of hardcoding them. Made changes to bcm_qspi_bspi_set_flex_mode() to set the BSPI
controller using the passed msg structure and remove the need to include
<linux/mtd/spi-nor.h> file by removing all use of SPINOR_OP_READ* macros.

Fixes: 4e3b2d23 ("spi: bcm-qspi: Add BSPI spi-nor flash controller driver")
Link: https://patchwork.kernel.org/patch/9624585/Signed-off-by: default avatarKamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 5771a8c0
......@@ -25,7 +25,6 @@
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mtd/spi-nor.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
......@@ -349,76 +348,60 @@ static void bcm_qspi_bspi_set_xfer_params(struct bcm_qspi *qspi, u8 cmd_byte,
bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, flex_mode);
}
static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width,
int addrlen, int hp)
static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi,
struct spi_flash_read_message *msg,
int hp)
{
int bpc = 0, bpp = 0;
u8 command = SPINOR_OP_READ_FAST;
int flex_mode = 1, rv = 0;
bool spans_4byte = false;
u8 command = msg->read_opcode;
int width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
int addrlen = msg->addr_width;
int addr_nbits = msg->addr_nbits ? msg->addr_nbits : SPI_NBITS_SINGLE;
int flex_mode = 1;
dev_dbg(&qspi->pdev->dev, "set flex mode w %x addrlen %x hp %d\n",
width, addrlen, hp);
if (addrlen == BSPI_ADDRLEN_4BYTES) {
if (addrlen == BSPI_ADDRLEN_4BYTES)
bpp = BSPI_BPP_ADDR_SELECT_MASK;
spans_4byte = true;
}
bpp |= 8;
bpp |= msg->dummy_bytes * (8/addr_nbits);
switch (width) {
case SPI_NBITS_SINGLE:
if (addrlen == BSPI_ADDRLEN_3BYTES)
/* default mode, does not need flex_cmd */
flex_mode = 0;
else
command = SPINOR_OP_READ_FAST_4B;
break;
case SPI_NBITS_DUAL:
bpc = 0x00000001;
if (hp) {
bpc |= 0x00010100; /* address and mode are 2-bit */
bpp = BSPI_BPP_MODE_SELECT_MASK;
command = OPCODE_DIOR;
if (spans_4byte)
command = OPCODE_DIOR_4B;
} else {
command = SPINOR_OP_READ_1_1_2;
if (spans_4byte)
command = SPINOR_OP_READ_1_1_2_4B;
}
break;
case SPI_NBITS_QUAD:
bpc = 0x00000002;
if (hp) {
bpc |= 0x00020200; /* address and mode are 4-bit */
bpp = 4; /* dummy cycles */
bpp |= BSPI_BPP_ADDR_SELECT_MASK;
command = OPCODE_QIOR;
if (spans_4byte)
command = OPCODE_QIOR_4B;
} else {
command = SPINOR_OP_READ_1_1_4;
if (spans_4byte)
command = SPINOR_OP_READ_1_1_4_4B;
bpp |= BSPI_BPP_MODE_SELECT_MASK;
}
break;
default:
rv = -EINVAL;
break;
return -EINVAL;
}
if (rv == 0)
bcm_qspi_bspi_set_xfer_params(qspi, command, bpp, bpc,
flex_mode);
bcm_qspi_bspi_set_xfer_params(qspi, command, bpp, bpc, flex_mode);
return rv;
return 0;
}
static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, int width,
int addrlen, int hp)
static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi,
struct spi_flash_read_message *msg,
int hp)
{
int width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
int addrlen = msg->addr_width;
u32 data = bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
dev_dbg(&qspi->pdev->dev, "set override mode w %x addrlen %x hp %d\n",
......@@ -430,7 +413,6 @@ static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, int width,
data &= ~(BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD |
BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL);
break;
case SPI_NBITS_QUAD:
/* clear dual mode and set quad mode */
data &= ~BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL;
......@@ -455,15 +437,17 @@ static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, int width,
/* set the override mode */
data |= BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE;
bcm_qspi_write(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL, data);
bcm_qspi_bspi_set_xfer_params(qspi, SPINOR_OP_READ_FAST, 0, 0, 0);
bcm_qspi_bspi_set_xfer_params(qspi, msg->read_opcode, 0, 0, 0);
return 0;
}
static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi,
int width, int addrlen, int hp)
struct spi_flash_read_message *msg, int hp)
{
int error = 0;
int width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
int addrlen = msg->addr_width;
/* default mode */
qspi->xfer_mode.flex_mode = true;
......@@ -475,23 +459,13 @@ static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi,
mask = BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE;
if (val & mask || qspi->s3_strap_override_ctrl & mask) {
qspi->xfer_mode.flex_mode = false;
bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE,
0);
if ((val | qspi->s3_strap_override_ctrl) &
BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL)
width = SPI_NBITS_DUAL;
else if ((val | qspi->s3_strap_override_ctrl) &
BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD)
width = SPI_NBITS_QUAD;
error = bcm_qspi_bspi_set_override(qspi, width, addrlen,
hp);
bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, 0);
error = bcm_qspi_bspi_set_override(qspi, msg, hp);
}
}
if (qspi->xfer_mode.flex_mode)
error = bcm_qspi_bspi_set_flex_mode(qspi, width, addrlen, hp);
error = bcm_qspi_bspi_set_flex_mode(qspi, msg, hp);
if (error) {
dev_warn(&qspi->pdev->dev,
......@@ -981,7 +955,7 @@ static int bcm_qspi_flash_read(struct spi_device *spi,
struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
int ret = 0;
bool mspi_read = false;
u32 io_width, addrlen, addr, len;
u32 addr, len;
u_char *buf;
buf = msg->buf;
......@@ -1010,9 +984,7 @@ static int bcm_qspi_flash_read(struct spi_device *spi,
if (mspi_read)
return bcm_qspi_mspi_flash_read(spi, msg);
io_width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
addrlen = msg->addr_width;
ret = bcm_qspi_bspi_set_mode(qspi, io_width, addrlen, -1);
ret = bcm_qspi_bspi_set_mode(qspi, msg, -1);
if (!ret)
ret = bcm_qspi_bspi_flash_read(spi, msg);
......@@ -1422,6 +1394,11 @@ static int __maybe_unused bcm_qspi_suspend(struct device *dev)
{
struct bcm_qspi *qspi = dev_get_drvdata(dev);
/* store the override strap value */
if (!bcm_qspi_bspi_ver_three(qspi))
qspi->s3_strap_override_ctrl =
bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
spi_master_suspend(qspi->master);
clk_disable(qspi->clk);
bcm_qspi_hw_uninit(qspi);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment