dt-bindings: net: Add missing (unevaluated|additional)Properties on child nodes

In order to ensure only documented properties are present, node schemas
must have unevaluatedProperties or additionalProperties set to false
(typically). Add missing properties/$refs as exposed by this addition.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220825192609.1538463-1-robh@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml

@@ -37,6 +37,7 @@ properties:
 patternProperties:
   "^ethernet-port@[0-9]+$":
     type: object
+    unevaluatedProperties: false
     description: contains the resources for ethernet port
     allOf:
       - $ref: ethernet-controller.yaml#

Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml

@@ -74,9 +74,7 @@ properties:
 
   ethernet-ports:
     type: object
-    patternProperties:
-      "^port@[0-9a-f]+$":
-        type: object
+    additionalProperties: false
 
     properties:
       '#address-cells':
@@ -84,6 +82,12 @@ properties:
       '#size-cells':
         const: 0
 
+    patternProperties:
+      "^port@[0-9a-f]+$":
+        $ref: /schemas/net/ethernet-controller.yaml#
+        unevaluatedProperties: false
+
+        properties:
           reg:
             description: Switch port number
 
@@ -93,29 +97,11 @@ properties:
               phandle of a Ethernet SerDes PHY.  This defines which SerDes
               instance will handle the Ethernet traffic.
 
-          phy-mode:
-            description:
-              This specifies the interface used by the Ethernet SerDes towards
-              the PHY or SFP.
-
           microchip,bandwidth:
             description: Specifies bandwidth in Mbit/s allocated to the port.
             $ref: "/schemas/types.yaml#/definitions/uint32"
             maximum: 25000
 
-          phy-handle:
-            description:
-              phandle of a Ethernet PHY.  This is optional and if provided it
-              points to the cuPHY used by the Ethernet SerDes.
-
-          sfp:
-            description:
-              phandle of an SFP.  This is optional and used when not specifying
-              a cuPHY.  It points to the SFP node that describes the SFP used by
-              the Ethernet SerDes.
-
-          managed: true
-
           microchip,sd-sgpio:
             description:
               Index of the ports Signal Detect SGPIO in the set of 384 SGPIOs

Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml

@@ -32,6 +32,7 @@ properties:
 
   ethernet-ports:
     type: object
+    additionalProperties: false
     description: Ethernet ports to PHY
 
     properties:
@@ -44,6 +45,7 @@ properties:
     patternProperties:
       "^port@[0-1]$":
         type: object
+        additionalProperties: false
         description: Port to PHY
 
         properties:

Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml

@@ -77,6 +77,8 @@ properties:
 
   ethernet-ports:
     type: object
+    additionalProperties: false
+
     properties:
       '#address-cells':
         const: 1
@@ -89,6 +91,7 @@ properties:
         description: CPSW external ports
 
         $ref: ethernet-controller.yaml#
+        unevaluatedProperties: false
 
         properties:
           reg:
@@ -117,6 +120,7 @@ properties:
 
   cpts:
     type: object
+    unevaluatedProperties: false
     description:
       The Common Platform Time Sync (CPTS) module
 

Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml

@@ -116,6 +116,7 @@ properties:
         description: CPSWxG NUSS external ports
 
         $ref: ethernet-controller.yaml#
+        unevaluatedProperties: false
 
         properties:
           reg:

Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml

@@ -95,6 +95,7 @@ properties:
 
   refclk-mux:
     type: object
+    additionalProperties: false
     description: CPTS reference clock multiplexer clock
     properties:
       '#clock-cells':