liquidio: fix bug in soft reset failure detection

The code that detects a failed soft reset of Octeon is comparing the wrong
value against the reset value of the Octeon SLI_SCRATCH_1 register,
resulting in an inability to detect a soft reset failure.  Fix it by using
the correct value in the comparison, which is any non-zero value.

Fixes: f21fb3ed ("Add support of Cavium Liquidio ethernet adapters")
Fixes: c0eab5b3 ("liquidio: CN23XX firmware download")
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c

@@ -221,7 +221,7 @@ static int cn23xx_pf_soft_reset(struct octeon_device *oct)
 	/* Wait for 100ms as Octeon resets. */
 	mdelay(100);
 
-	if (octeon_read_csr64(oct, CN23XX_SLI_SCRATCH1) == 0x1234ULL) {
+	if (octeon_read_csr64(oct, CN23XX_SLI_SCRATCH1)) {
 		dev_err(&oct->pci_dev->dev, "OCTEON[%d]: Soft reset failed\n",
 			oct->octeon_id);
 		return 1;

drivers/net/ethernet/cavium/liquidio/cn66xx_device.c

@@ -44,7 +44,7 @@ int lio_cn6xxx_soft_reset(struct octeon_device *oct)
 	/* Wait for 10ms as Octeon resets. */
 	mdelay(100);
 
-	if (octeon_read_csr64(oct, CN6XXX_SLI_SCRATCH1) == 0x1234ULL) {
+	if (octeon_read_csr64(oct, CN6XXX_SLI_SCRATCH1)) {
 		dev_err(&oct->pci_dev->dev, "Soft reset failed\n");
 		return 1;
 	}