Commit 05f07e7d authored by Jes Sorensen's avatar Jes Sorensen Committed by Greg Kroah-Hartman

staging: rtl8723au: usb_halinit.c: Use BIT() instead of BITx

Signed-off-by: default avatarJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent f8c41a92
......@@ -119,7 +119,7 @@ static u8 _InitPowerOn(struct rtw_adapter *padapter)
/* 0x04[19] = 1, suggest by Jackie 2011.05.09, reset 8051 */
value8 = rtw_read8(padapter, REG_APS_FSMCO+2);
rtw_write8(padapter, REG_APS_FSMCO + 2, (value8 | BIT3));
rtw_write8(padapter, REG_APS_FSMCO + 2, value8 | BIT(3));
/* Enable MAC DMA/WMAC/SCHEDULE/SEC block */
/* Set CR bit10 to enable 32k calibration. Suggested by SD1 Gimmy.
......@@ -131,7 +131,7 @@ static u8 _InitPowerOn(struct rtw_adapter *padapter)
rtw_write16(padapter, REG_CR, value16);
/* for Efuse PG, suggest by Jackie 2011.11.23 */
PHY_SetBBReg(padapter, REG_EFUSE_CTRL, BIT28|BIT29|BIT30, 0x06);
PHY_SetBBReg(padapter, REG_EFUSE_CTRL, BIT(28)|BIT(29)|BIT(30), 0x06);
return status;
}
......@@ -601,13 +601,13 @@ enum rt_rf_power_state RfOnOffDetect23a(struct rtw_adapter *pAdapter)
if (pAdapter->pwrctrlpriv.bHWPowerdown) {
val8 = rtw_read8(pAdapter, REG_HSISR);
DBG_8723A("pwrdown, 0x5c(BIT7) =%02x\n", val8);
rfpowerstate = (val8 & BIT7) ? rf_off : rf_on;
rfpowerstate = (val8 & BIT(7)) ? rf_off : rf_on;
} else { /* rf on/off */
rtw_write8(pAdapter, REG_MAC_PINMUX_CFG,
rtw_read8(pAdapter, REG_MAC_PINMUX_CFG) & ~BIT3);
rtw_read8(pAdapter, REG_MAC_PINMUX_CFG) & ~BIT(3));
val8 = rtw_read8(pAdapter, REG_GPIO_IO_SEL);
DBG_8723A("GPIO_IN =%02x\n", val8);
rfpowerstate = (val8 & BIT3) ? rf_on : rf_off;
rfpowerstate = (val8 & BIT(3)) ? rf_on : rf_off;
}
return rfpowerstate;
} /* HalDetectPwrDownMode */
......@@ -924,7 +924,7 @@ static void phy_SsPwrSwitch92CU(struct rtw_adapter *Adapter,
/* 2. Force PWM, Enable SPS18_LDO_Marco_Block */
rtw_write8(Adapter, REG_SPS0_CTRL,
rtw_read8(Adapter, REG_SPS0_CTRL) |
(BIT0|BIT3));
BIT(0) | BIT(3));
/* 3. restore BB, AFE control register. */
/* RF */
......@@ -935,7 +935,7 @@ static void phy_SsPwrSwitch92CU(struct rtw_adapter *Adapter,
PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter,
0x38, 1);
PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf0, 1);
PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT1, 0);
PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT(1), 0);
/* AFE */
if (pHalData->rf_type == RF_2T2R)
......@@ -968,7 +968,7 @@ static void phy_SsPwrSwitch92CU(struct rtw_adapter *Adapter,
/* 2. Force PWM, Enable SPS18_LDO_Marco_Block */
rtw_write8(Adapter, REG_SPS0_CTRL,
rtw_read8(Adapter, REG_SPS0_CTRL) |
(BIT0|BIT3));
BIT(0) | BIT(3));
/* 3. restore BB, AFE control register. */
/* RF */
......@@ -979,7 +979,7 @@ static void phy_SsPwrSwitch92CU(struct rtw_adapter *Adapter,
PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter,
0x38, 1);
PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf0, 1);
PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT1, 0);
PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT(1), 0);
/* AFE */
if (pHalData->rf_type == RF_2T2R)
......@@ -1002,7 +1002,7 @@ static void phy_SsPwrSwitch92CU(struct rtw_adapter *Adapter,
/* 5. gated MAC Clock */
bytetmp = rtw_read8(Adapter, REG_APSD_CTRL);
rtw_write8(Adapter, REG_APSD_CTRL, bytetmp & ~BIT6);
rtw_write8(Adapter, REG_APSD_CTRL, bytetmp & ~BIT(6));
mdelay(10);
......@@ -1017,9 +1017,9 @@ static void phy_SsPwrSwitch92CU(struct rtw_adapter *Adapter,
case rf_off:
value8 = rtw_read8(Adapter, REG_SPS0_CTRL) ;
if (IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID))
value8 &= ~(BIT0);
value8 &= ~BIT(0);
else
value8 &= ~(BIT0|BIT3);
value8 &= ~(BIT(0) | BIT(3));
if (bRegSSPwrLvl == 1) {
RT_TRACE(_module_hal_init_c_, _drv_err_, ("SS LVL1\n"));
/* Disable RF and BB only for SelectSuspend. */
......@@ -1049,7 +1049,7 @@ static void phy_SsPwrSwitch92CU(struct rtw_adapter *Adapter,
0x38, 0);
}
PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf0, 0);
PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT1, 1);
PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT(1), 1);
/* 2 .AFE control register to power down. bit[30:22] */
Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_AFE0] =
......@@ -1120,7 +1120,7 @@ static void phy_SsPwrSwitch92CU(struct rtw_adapter *Adapter,
PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter,
0x38, 0);
PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf0, 0);
PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT1, 1);
PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT(1), 1);
/* 2 .AFE control register to power down. bit[30:22] */
Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_AFE0] =
......@@ -1179,13 +1179,13 @@ static void CardDisableRTL8723U(struct rtw_adapter *Adapter)
rtw_write8(Adapter, REG_RF_CTRL, 0x00);
/* ==== Reset digital sequence ====== */
if ((rtw_read8(Adapter, REG_MCUFWDL)&BIT7) &&
if ((rtw_read8(Adapter, REG_MCUFWDL) & BIT(7)) &&
Adapter->bFWReady) /* 8051 RAM code */
rtl8723a_FirmwareSelfReset(Adapter);
/* Reset MCU. Suggested by Filen. 2011.01.26. by tynli. */
u1bTmp = rtw_read8(Adapter, REG_SYS_FUNC_EN+1);
rtw_write8(Adapter, REG_SYS_FUNC_EN+1, (u1bTmp & (~BIT2)));
rtw_write8(Adapter, REG_SYS_FUNC_EN+1, u1bTmp & ~BIT(2));
/* g. MCUFWDL 0x80[1:0]= 0 reset MCU ready status */
rtw_write8(Adapter, REG_MCUFWDL, 0x00);
......@@ -1198,9 +1198,9 @@ static void CardDisableRTL8723U(struct rtw_adapter *Adapter)
/* Reset MCU IO Wrapper, added by Roger, 2011.08.30. */
u1bTmp = rtw_read8(Adapter, REG_RSV_CTRL + 1);
rtw_write8(Adapter, REG_RSV_CTRL+1, (u1bTmp & (~BIT0)));
rtw_write8(Adapter, REG_RSV_CTRL+1, u1bTmp & ~BIT(0));
u1bTmp = rtw_read8(Adapter, REG_RSV_CTRL + 1);
rtw_write8(Adapter, REG_RSV_CTRL+1, u1bTmp | BIT0);
rtw_write8(Adapter, REG_RSV_CTRL+1, u1bTmp | BIT(0));
/* 7. RSV_CTRL 0x1C[7:0] = 0x0E lock ISO/CLK/Power control register */
rtw_write8(Adapter, REG_RSV_CTRL, 0x0e);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment