scsi: smartpqi: add suspend and resume support

add support for ACPI S3 (suspend) and S4 (hibernate)
system power states.
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/smartpqi/smartpqi.h

@@ -61,7 +61,7 @@ struct pqi_device_registers {
 /*
  * controller registers
  *
- * These are defined by the PMC implementation.
+ * These are defined by the Microsemi implementation.
  *
  * Some registers (those named sis_*) are only used when in
  * legacy SIS mode before we transition the controller into
@@ -102,6 +102,12 @@ enum pqi_io_path {
 	AIO_PATH = 1
 };
 
+enum pqi_irq_mode {
+	IRQ_MODE_NONE,
+	IRQ_MODE_INTX,
+	IRQ_MODE_MSIX
+};
+
 struct pqi_sg_descriptor {
 	__le64	address;
 	__le32	length;
@@ -908,7 +914,7 @@ struct pqi_ctrl_info {
 	dma_addr_t	error_buffer_dma_handle;
 	size_t		sg_chain_buffer_length;
 	unsigned int	num_queue_groups;
-	unsigned int	num_active_queue_groups;
+	u16		max_hw_queue_index;
 	u16		num_elements_per_iq;
 	u16		num_elements_per_oq;
 	u16		max_inbound_iu_length_per_firmware;
@@ -923,6 +929,7 @@ struct pqi_ctrl_info {
 	struct pqi_admin_queues admin_queues;
 	struct pqi_queue_group queue_groups[PQI_MAX_QUEUE_GROUPS];
 	struct pqi_event_queue event_queue;
+	enum pqi_irq_mode irq_mode;
 	int		max_msix_vectors;
 	int		num_msix_vectors_enabled;
 	int		num_msix_vectors_initialized;
@@ -937,6 +944,7 @@ struct pqi_ctrl_info {
 	u8		outbound_spanning_supported : 1;
 	u8		pqi_mode_enabled : 1;
 	u8		heartbeat_timer_started : 1;
+	u8		update_time_worker_scheduled : 1;
 
 	struct list_head scsi_device_list;
 	spinlock_t	scsi_device_list_lock;

drivers/scsi/smartpqi/smartpqi_sis.c

@@ -33,6 +33,7 @@
 /* for submission of legacy SIS commands */
 #define SIS_REENABLE_SIS_MODE			0x1
 #define SIS_ENABLE_MSIX				0x40
+#define SIS_ENABLE_INTX				0x80
 #define SIS_SOFT_RESET				0x100
 #define SIS_TRIGGER_SHUTDOWN			0x800000
 #define SIS_CMD_READY				0x200
@@ -56,6 +57,7 @@
 #define SIS_CTRL_KERNEL_UP			0x80
 #define SIS_CTRL_KERNEL_PANIC			0x100
 #define SIS_CTRL_READY_TIMEOUT_SECS		30
+#define SIS_CTRL_READY_RESUME_TIMEOUT_SECS	90
 #define SIS_CTRL_READY_POLL_INTERVAL_MSECS	10
 
 #pragma pack(1)
@@ -79,12 +81,13 @@ struct sis_base_struct {
 
 #pragma pack()
 
-int sis_wait_for_ctrl_ready(struct pqi_ctrl_info *ctrl_info)
+static int sis_wait_for_ctrl_ready_with_timeout(struct pqi_ctrl_info *ctrl_info,
+	unsigned int timeout_secs)
 {
 	unsigned long timeout;
 	u32 status;
 
-	timeout = (SIS_CTRL_READY_TIMEOUT_SECS * HZ) + jiffies;
+	timeout = (timeout_secs * HZ) + jiffies;
 
 	while (1) {
 		status = readl(&ctrl_info->registers->sis_firmware_status);
@@ -107,6 +110,18 @@ int sis_wait_for_ctrl_ready(struct pqi_ctrl_info *ctrl_info)
 	return 0;
 }
 
+int sis_wait_for_ctrl_ready(struct pqi_ctrl_info *ctrl_info)
+{
+	return sis_wait_for_ctrl_ready_with_timeout(ctrl_info,
+		SIS_CTRL_READY_TIMEOUT_SECS);
+}
+
+int sis_wait_for_ctrl_ready_resume(struct pqi_ctrl_info *ctrl_info)
+{
+	return sis_wait_for_ctrl_ready_with_timeout(ctrl_info,
+		SIS_CTRL_READY_RESUME_TIMEOUT_SECS);
+}
+
 bool sis_is_firmware_running(struct pqi_ctrl_info *ctrl_info)
 {
 	bool running;
@@ -315,6 +330,34 @@ int sis_init_base_struct_addr(struct pqi_ctrl_info *ctrl_info)
 	return rc;
 }
 
+#define SIS_DOORBELL_BIT_CLEAR_TIMEOUT_SECS	30
+
+static void sis_wait_for_doorbell_bit_to_clear(
+	struct pqi_ctrl_info *ctrl_info, u32 bit)
+{
+	u32 doorbell_register;
+	unsigned long timeout;
+
+	timeout = (SIS_DOORBELL_BIT_CLEAR_TIMEOUT_SECS * HZ) + jiffies;
+
+	while (1) {
+		doorbell_register =
+			readl(&ctrl_info->registers->sis_host_to_ctrl_doorbell);
+		if ((doorbell_register & bit) == 0)
+			break;
+		if (readl(&ctrl_info->registers->sis_firmware_status) &
+			SIS_CTRL_KERNEL_PANIC)
+			break;
+		if (time_after(jiffies, timeout)) {
+			dev_err(&ctrl_info->pci_dev->dev,
+				"doorbell register bit 0x%x not cleared\n",
+				bit);
+			break;
+		}
+		usleep_range(1000, 2000);
+	}
+}
+
 /* Enable MSI-X interrupts on the controller. */
 
 void sis_enable_msix(struct pqi_ctrl_info *ctrl_info)
@@ -327,6 +370,8 @@ void sis_enable_msix(struct pqi_ctrl_info *ctrl_info)
 
 	writel(doorbell_register,
 		&ctrl_info->registers->sis_host_to_ctrl_doorbell);
+
+	sis_wait_for_doorbell_bit_to_clear(ctrl_info, SIS_ENABLE_MSIX);
 }
 
 /* Disable MSI-X interrupts on the controller. */
@@ -343,6 +388,32 @@ void sis_disable_msix(struct pqi_ctrl_info *ctrl_info)
 		&ctrl_info->registers->sis_host_to_ctrl_doorbell);
 }
 
+void sis_enable_intx(struct pqi_ctrl_info *ctrl_info)
+{
+	u32 doorbell_register;
+
+	doorbell_register =
+		readl(&ctrl_info->registers->sis_host_to_ctrl_doorbell);
+	doorbell_register |= SIS_ENABLE_INTX;
+
+	writel(doorbell_register,
+		&ctrl_info->registers->sis_host_to_ctrl_doorbell);
+
+	sis_wait_for_doorbell_bit_to_clear(ctrl_info, SIS_ENABLE_INTX);
+}
+
+void sis_disable_intx(struct pqi_ctrl_info *ctrl_info)
+{
+	u32 doorbell_register;
+
+	doorbell_register =
+		readl(&ctrl_info->registers->sis_host_to_ctrl_doorbell);
+	doorbell_register &= ~SIS_ENABLE_INTX;
+
+	writel(doorbell_register,
+		&ctrl_info->registers->sis_host_to_ctrl_doorbell);
+}
+
 void sis_soft_reset(struct pqi_ctrl_info *ctrl_info)
 {
 	writel(SIS_SOFT_RESET,

drivers/scsi/smartpqi/smartpqi_sis.h

@@ -20,6 +20,7 @@
 #define _SMARTPQI_SIS_H
 
 int sis_wait_for_ctrl_ready(struct pqi_ctrl_info *ctrl_info);
+int sis_wait_for_ctrl_ready_resume(struct pqi_ctrl_info *ctrl_info);
 bool sis_is_firmware_running(struct pqi_ctrl_info *ctrl_info);
 bool sis_is_kernel_up(struct pqi_ctrl_info *ctrl_info);
 int sis_get_ctrl_properties(struct pqi_ctrl_info *ctrl_info);
@@ -27,6 +28,8 @@ int sis_get_pqi_capabilities(struct pqi_ctrl_info *ctrl_info);
 int sis_init_base_struct_addr(struct pqi_ctrl_info *ctrl_info);
 void sis_enable_msix(struct pqi_ctrl_info *ctrl_info);
 void sis_disable_msix(struct pqi_ctrl_info *ctrl_info);
+void sis_enable_intx(struct pqi_ctrl_info *ctrl_info);
+void sis_disable_intx(struct pqi_ctrl_info *ctrl_info);
 void sis_soft_reset(struct pqi_ctrl_info *ctrl_info);
 void sis_shutdown_ctrl(struct pqi_ctrl_info *ctrl_info);
 int sis_reenable_sis_mode(struct pqi_ctrl_info *ctrl_info);