Skip to content

L
linux
Commit 063f22af authored by Bartlomiej Zolnierkiewicz's avatar Bartlomiej Zolnierkiewicz Committed by Greg Kroah-Hartman
Browse files
Options

Staging: rt2860: remove dead RALINK_ATE code 

Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 55468fae
Hide whitespace changes
Inline Side-by-side
Showing with 1 addition and 6907 deletions
drivers/staging/rt2860/common/action.c
View file @ 063f22af
......@@ -881,11 +881,6 @@ VOID ORIBATimerTimeout(
INT i, total;
UCHAR TID;
#ifdef RALINK_ATE
if (ATE_ON(pAd))
return;
#endif // RALINK_ATE //
total = pAd->MacTab.Size * NUM_OF_TID;
for (i = 1; ((i <MAX_LEN_OF_BA_ORI_TABLE) && (total > 0)) ; i++)
......
drivers/staging/rt2860/common/ba_action.c
View file @ 063f22af
......@@ -1092,12 +1092,6 @@ VOID BAOriSessionSetupTimeout(
}
#endif // CONFIG_STA_SUPPORT //
#ifdef RALINK_ATE
// Nothing to do in ATE mode.
if (ATE_ON(pAd))
return;
#endif // RALINK_ATE //
pEntry = &pAd->MacTab.Content[pBAEntry->Wcid];
if ((pBAEntry->ORI_BA_Status == Originator_WaitRes) && (pBAEntry->Token < ORI_SESSION_MAX_RETRY))
......
drivers/staging/rt2860/common/cmm_data.c
View file @ 063f22af
......@@ -1771,85 +1771,6 @@ BOOLEAN RTMPFreeTXDUponTxDmaDone(
RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QueIdx * RINGREG_DIFF, &pTxRing->TxDmaIdx);
while (pTxRing->TxSwFreeIdx != pTxRing->TxDmaIdx)
{
#ifdef RALINK_ATE
#ifdef RALINK_28xx_QA
PHEADER_802_11 pHeader80211;
if ((ATE_ON(pAd)) && (pAd->ate.bQATxStart == TRUE))
{
if (pAd->ate.QID == QueIdx)
{
pAd->ate.TxDoneCount++;
//pAd->ate.Repeat++;
pAd->RalinkCounters.KickTxCount++;
/* always use QID_AC_BE and FIFO_EDCA */
ASSERT(pAd->ate.QID == 0);
pAd->ate.TxAc0++;
FREE++;
#ifndef RT_BIG_ENDIAN
pTxD = (PTXD_STRUC) (pTxRing->Cell[pTxRing->TxSwFreeIdx].AllocVa);
pOriTxD = pTxD;
NdisMoveMemory(&TxD, pTxD, sizeof(TXD_STRUC));
pTxD = &TxD;
#else
pDestTxD = (PTXD_STRUC) (pTxRing->Cell[pTxRing->TxSwFreeIdx].AllocVa);
pOriTxD = pDestTxD ;
TxD = *pDestTxD;
pTxD = &TxD;
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
#endif
pTxD->DMADONE = 0;
pHeader80211 = pTxRing->Cell[pTxRing->TxSwFreeIdx].DmaBuf.AllocVa + sizeof(TXWI_STRUC);
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, (PUCHAR)pHeader80211, DIR_READ, FALSE);
#endif
pHeader80211->Sequence = ++pAd->ate.seq;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, (PUCHAR)pHeader80211, DIR_WRITE, FALSE);
#endif
if ((pAd->ate.bQATxStart == TRUE) && (pAd->ate.Mode & ATE_TXFRAME) && (pAd->ate.TxDoneCount < pAd->ate.TxCount))
{
pAd->RalinkCounters.TransmittedByteCount += (pTxD->SDLen1 + pTxD->SDLen0);
pAd->RalinkCounters.OneSecDmaDoneCount[QueIdx] ++;
INC_RING_INDEX(pTxRing->TxSwFreeIdx, TX_RING_SIZE);
/* get tx_tdx_idx again */
RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QueIdx * RINGREG_DIFF , &pTxRing->TxDmaIdx);
goto kick_out;
}
else if ((pAd->ate.TxStatus == 1)/* or (pAd->ate.bQATxStart == TRUE) ??? */ && (pAd->ate.TxDoneCount == pAd->ate.TxCount))//<========================PETER
{
DBGPRINT(RT_DEBUG_TRACE,("all Tx is done\n"));
// Tx status enters idle mode.
pAd->ate.TxStatus = 0;
}
else if (!(pAd->ate.Mode & ATE_TXFRAME))
{
/* not complete sending yet, but someone press the Stop TX botton. */
DBGPRINT(RT_DEBUG_ERROR,("not complete sending yet, but someone pressed the Stop TX bottom\n"));
DBGPRINT(RT_DEBUG_ERROR,("pAd->ate.Mode = 0x%02x\n", pAd->ate.Mode));
}
else
{
DBGPRINT(RT_DEBUG_OFF,("pTxRing->TxSwFreeIdx = %d\n", pTxRing->TxSwFreeIdx));
}
#ifndef RT_BIG_ENDIAN
NdisMoveMemory(pOriTxD, pTxD, sizeof(TXD_STRUC));
#else
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
*pDestTxD = TxD;
#endif // RT_BIG_ENDIAN //
INC_RING_INDEX(pTxRing->TxSwFreeIdx, TX_RING_SIZE);
continue;
}
}
#endif // RALINK_28xx_QA //
#endif // RALINK_ATE //
// static rate also need NICUpdateFifoStaCounters() function.
//if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))
NICUpdateFifoStaCounters(pAd);
......@@ -1871,11 +1792,6 @@ BOOLEAN RTMPFreeTXDUponTxDmaDone(
pTxD->DMADONE = 0;
#ifdef RALINK_ATE
/* Execution of this block is not allowed when ATE is running. */
if (!(ATE_ON(pAd)))
#endif // RALINK_ATE //
/*====================================================================*/
{
pPacket = pTxRing->Cell[pTxRing->TxSwFreeIdx].pNdisPacket;
......@@ -1921,53 +1837,6 @@ BOOLEAN RTMPFreeTXDUponTxDmaDone(
#else
NdisMoveMemory(pOriTxD, pTxD, sizeof(TXD_STRUC));
#endif
#ifdef RALINK_ATE
#ifdef RALINK_28xx_QA
kick_out:
#endif // RALINK_28xx_QA //
//
// ATE_TXCONT mode also need to send some normal frames, so let it in.
// ATE_STOP must be changed not to be 0xff
// to prevent it from running into this block.
//
if ((pAd->ate.Mode & ATE_TXFRAME) && (pAd->ate.QID == QueIdx))
{
// TxDoneCount++ has been done if QA is used.
if (pAd->ate.bQATxStart == FALSE)
{
pAd->ate.TxDoneCount++;
}
if (((pAd->ate.TxCount - pAd->ate.TxDoneCount + 1) >= TX_RING_SIZE))
{
/* Note : We increase TxCpuIdx here, not TxSwFreeIdx ! */
INC_RING_INDEX(pAd->TxRing[QueIdx].TxCpuIdx, TX_RING_SIZE);
#ifndef RT_BIG_ENDIAN//<==========================PETER
pTxD = (PTXD_STRUC) (pTxRing->Cell[pAd->TxRing[QueIdx].TxCpuIdx].AllocVa);
pOriTxD = pTxD;
NdisMoveMemory(&TxD, pTxD, sizeof(TXD_STRUC));
pTxD = &TxD;
#else
pDestTxD = (PTXD_STRUC) (pTxRing->Cell[pAd->TxRing[QueIdx].TxCpuIdx].AllocVa);
pOriTxD = pDestTxD ;
TxD = *pDestTxD;
pTxD = &TxD;
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
#endif
pTxD->DMADONE = 0;
#ifndef RT_BIG_ENDIAN//<==========================PETER
NdisMoveMemory(pOriTxD, pTxD, sizeof(TXD_STRUC));
#else
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
*pDestTxD = TxD;
#endif
// kick Tx-Ring.
RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QueIdx * RINGREG_DIFF, pAd->TxRing[QueIdx].TxCpuIdx);
pAd->RalinkCounters.KickTxCount++;
}
}
#endif // RALINK_ATE //
}
......
drivers/staging/rt2860/common/cmm_sync.c
View file @ 063f22af
......@@ -397,12 +397,6 @@ VOID ScanNextChannel(
}
#endif // CONFIG_STA_SUPPORT //
#ifdef RALINK_ATE
// Nothing to do in ATE mode.
if (ATE_ON(pAd))
return;
#endif // RALINK_ATE //
if (pAd->MlmeAux.Channel == 0)
{
if ((pAd->CommonCfg.BBPCurrentBW == BW_40)
......
drivers/staging/rt2860/common/mlme.c
View file @ 063f22af
......@@ -589,14 +589,6 @@ VOID MlmeHandler(
break;
}
#ifdef RALINK_ATE
if(ATE_ON(pAd))
{
DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now in MlmeHandler\n"));
break;
}
#endif // RALINK_ATE //
//From message type, determine which state machine I should drive
if (MlmeDequeue(&pAd->Mlme.Queue, &Elem))
{
......@@ -906,18 +898,6 @@ VOID MlmePeriodicExec(
RT28XX_MLME_PRE_SANITY_CHECK(pAd);
#ifdef RALINK_ATE
/* Do not show RSSI until "Normal 1 second Mlme PeriodicExec". */
if (ATE_ON(pAd))
{
if (pAd->Mlme.PeriodicRound % MLME_TASK_EXEC_MULTIPLE != (MLME_TASK_EXEC_MULTIPLE - 1))
{
pAd->Mlme.PeriodicRound ++;
return;
}
}
#endif // RALINK_ATE //
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
......@@ -971,30 +951,6 @@ VOID MlmePeriodicExec(
{
pAd->Mlme.OneSecPeriodicRound ++;
#ifdef RALINK_ATE
if (ATE_ON(pAd))
{
/* request from Baron : move this routine from later to here */
/* for showing Rx error count in ATE RXFRAME */
NICUpdateRawCounters(pAd);
if (pAd->ate.bRxFer == 1)
{
pAd->ate.RxTotalCnt += pAd->ate.RxCntPerSec;
ate_print(KERN_EMERG "MlmePeriodicExec: Rx packet cnt = %d/%d\n", pAd->ate.RxCntPerSec, pAd->ate.RxTotalCnt);
pAd->ate.RxCntPerSec = 0;
if (pAd->ate.RxAntennaSel == 0)
ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi0=%d, AvgRssi1=%d, AvgRssi2=%d\n\n",
pAd->ate.AvgRssi0, pAd->ate.AvgRssi1, pAd->ate.AvgRssi2);
else
ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi=%d\n\n", pAd->ate.AvgRssi0);
}
MlmeResetRalinkCounters(pAd);
return;
}
#endif // RALINK_ATE //
if (rx_Total)
{
......@@ -1103,17 +1059,6 @@ VOID STAMlmePeriodicExec(
{
ULONG TxTotalCnt;
//
// We return here in ATE mode, because the statistics
// that ATE needs are not collected via this routine.
//
#ifdef RALINK_ATE
// It is supposed that we will never reach here in ATE mode.
ASSERT(!(ATE_ON(pAd)));
if (ATE_ON(pAd))
return;
#endif // RALINK_ATE //
#ifdef WPA_SUPPLICANT_SUPPORT
if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE)
#endif // WPA_SUPPLICANT_SUPPORT //
......@@ -2127,13 +2072,6 @@ VOID MlmeDynamicTxRateSwitching(
ULONG TxRetransmit = 0, TxSuccess = 0, TxFailCount = 0;
MAC_TABLE_ENTRY *pEntry;
#ifdef RALINK_ATE
if (ATE_ON(pAd))
{
return;
}
#endif // RALINK_ATE //
/*if (pAd->Antenna.field.RxPath > 1)
Rssi = (pAd->StaCfg.RssiSample.AvgRssi0 + pAd->StaCfg.RssiSample.AvgRssi1) >> 1;
else
......@@ -4922,12 +4860,6 @@ BOOLEAN MlmeEnqueueForRecv(
INT MsgType;
MLME_QUEUE *Queue = (MLME_QUEUE *)&pAd->Mlme.Queue;
#ifdef RALINK_ATE
/* Nothing to do in ATE mode */
if(ATE_ON(pAd))
return FALSE;
#endif // RALINK_ATE //
// Do nothing if the driver is starting halt state.
// This might happen when timer already been fired before cancel timer with mlmehalt
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
......@@ -5634,11 +5566,6 @@ VOID AsicUpdateProtect(
UCHAR i;
UINT32 MacReg = 0;
#ifdef RALINK_ATE
if (ATE_ON(pAd))
return;
#endif // RALINK_ATE //
#ifdef DOT11_N_SUPPORT
if (!(pAd->CommonCfg.bHTProtect) && (OperationMode != 8))
{
......@@ -7596,9 +7523,7 @@ BOOLEAN AsicSendCommandToMcu(
HOST_CMD_CSR_STRUC H2MCmd;
H2M_MAILBOX_STRUC H2MMailbox;
ULONG i = 0;
#ifdef RALINK_ATE
static UINT32 j = 0;
#endif // RALINK_ATE //
do
{
RTMP_IO_READ32(pAd, H2M_MAILBOX_CSR, &H2MMailbox.word);
......@@ -7610,30 +7535,6 @@ BOOLEAN AsicSendCommandToMcu(
if (i >= 100)
{
#ifdef RALINK_ATE
if (pAd->ate.bFWLoading == TRUE)
{
/* reloading firmware when received iwpriv cmd "ATE=ATESTOP" */
if (j > 0)
{
if (j % 64 != 0)
{
DBGPRINT(RT_DEBUG_ERROR, ("#"));
}
else
{
DBGPRINT(RT_DEBUG_ERROR, ("\n"));
}
++j;
}
else if (j == 0)
{
DBGPRINT(RT_DEBUG_ERROR, ("Loading firmware. Please wait for a moment...\n"));
++j;
}
}
else
#endif // RALINK_ATE //
{
UINT32 Data;
......@@ -7661,16 +7562,6 @@ BOOLEAN AsicSendCommandToMcu(
//return FALSE;
}
#ifdef RALINK_ATE
else if (pAd->ate.bFWLoading == TRUE)
{
/* reloading of firmware is completed */
pAd->ate.bFWLoading = FALSE;
DBGPRINT(RT_DEBUG_ERROR, ("\n"));
j = 0;
}
#endif // RALINK_ATE //
H2MMailbox.field.Owner = 1; // pass ownership to MCU
H2MMailbox.field.CmdToken = Token;
H2MMailbox.field.HighByte = Arg1;
......@@ -8126,12 +8017,6 @@ VOID AsicEvaluateRxAnt(
{
UCHAR BBPR3 = 0;
#ifdef RALINK_ATE
if (ATE_ON(pAd))
return;
#endif // RALINK_ATE //
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
......@@ -8211,12 +8096,6 @@ VOID AsicRxAntEvalTimeout(
CHAR larger = -127, rssi0, rssi1, rssi2;
#endif // CONFIG_STA_SUPPORT //
#ifdef RALINK_ATE
if (ATE_ON(pAd))
return;
#endif // RALINK_ATE //
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
......
drivers/staging/rt2860/common/rtmp_init.c
View file @ 063f22af
......@@ -2214,12 +2214,6 @@ VOID NICUpdateFifoStaCounters(
CHAR reTry;
UCHAR succMCS;
#ifdef RALINK_ATE
/* Nothing to do in ATE mode */
if (ATE_ON(pAd))
return;
#endif // RALINK_ATE //
do
{
RTMP_IO_READ32(pAd, TX_STA_FIFO, &StaFifo.word);
......@@ -3171,37 +3165,6 @@ VOID UserCfgInit(
InitializeQueueHeader(&pAd->MacTab.McastPsQueue);
NdisAllocateSpinLock(&pAd->MacTabLock);
#ifdef RALINK_ATE
NdisZeroMemory(&pAd->ate, sizeof(ATE_INFO));
pAd->ate.Mode = ATE_STOP;
pAd->ate.TxCount = 200;/* to exceed TX_RING_SIZE ... */
pAd->ate.TxLength = 1024;
pAd->ate.TxWI.ShortGI = 0;// LONG GI : 800 ns
pAd->ate.TxWI.PHYMODE = MODE_CCK;
pAd->ate.TxWI.MCS = 3;
pAd->ate.TxWI.BW = BW_20;
pAd->ate.Channel = 1;
pAd->ate.QID = QID_AC_BE;
pAd->ate.Addr1[0] = 0x00;
pAd->ate.Addr1[1] = 0x11;
pAd->ate.Addr1[2] = 0x22;
pAd->ate.Addr1[3] = 0xAA;
pAd->ate.Addr1[4] = 0xBB;
pAd->ate.Addr1[5] = 0xCC;
NdisMoveMemory(pAd->ate.Addr2, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS);
NdisMoveMemory(pAd->ate.Addr3, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS);
pAd->ate.bRxFer = 0;
pAd->ate.bQATxStart = FALSE;
pAd->ate.bQARxStart = FALSE;
pAd->ate.bFWLoading = FALSE;
#ifdef RALINK_28xx_QA
//pAd->ate.Repeat = 0;
pAd->ate.TxStatus = 0;
pAd->ate.AtePid = THREAD_PID_INIT_VALUE;
#endif // RALINK_28xx_QA //
#endif // RALINK_ATE //
pAd->CommonCfg.bWiFiTest = FALSE;
pAd->bPCIclkOff = FALSE;
......@@ -3472,13 +3435,6 @@ VOID RTMPSetLED(
UCHAR HighByte = 0;
UCHAR LowByte;
// In ATE mode of RT2860 AP/STA, we have erased 8051 firmware.
// So LED mode is not supported when ATE is running.
#ifdef RALINK_ATE
if (ATE_ON(pAd))
return;
#endif // RALINK_ATE //
LowByte = pAd->LedCntl.field.LedMode&0x7f;
switch (Status)
{
......
drivers/staging/rt2860/oid.h
View file @ 063f22af
......@@ -82,9 +82,6 @@
#define OID_GEN_MACHINE_NAME 0x0001021A
#ifdef RALINK_ATE
#define RT_QUERY_ATE_TXDONE_COUNT 0x0401
#endif // RALINK_ATE //
#define RT_QUERY_SIGNAL_CONTEXT 0x0402
#define RT_SET_IAPP_PID 0x0404
#define RT_SET_APD_PID 0x0405
......@@ -650,12 +647,6 @@ typedef struct _NDIS_802_11_CAPABILITY
#define RTPRIV_IOCTL_E2P (SIOCIWFIRSTPRIV + 0x07)
#endif
#ifdef RALINK_ATE
#ifdef RALINK_28xx_QA
#define RTPRIV_IOCTL_ATE (SIOCIWFIRSTPRIV + 0x08)
#endif // RALINK_28xx_QA //
#endif // RALINK_ATE //
#define RTPRIV_IOCTL_STATISTICS (SIOCIWFIRSTPRIV + 0x09)
#define RTPRIV_IOCTL_ADD_PMKID_CACHE (SIOCIWFIRSTPRIV + 0x0A)
#define RTPRIV_IOCTL_RADIUS_DATA (SIOCIWFIRSTPRIV + 0x0C)
......
drivers/staging/rt2860/rt_ate.c deleted 100644 → 0
View file @ 55468fae
This source diff could not be displayed because it is too large. You can view the blob instead.
drivers/staging/rt2860/rt_ate.h deleted 100644 → 0
View file @ 55468fae
/*
*************************************************************************
* Ralink Tech Inc.
* 5F., No.36, Taiyuan St., Jhubei City,
* Hsinchu County 302,
* Taiwan, R.O.C.
*
* (c) Copyright 2002-2007, Ralink Technology, Inc.
*
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
* *
*************************************************************************
*/
#ifndef __ATE_H__
#define __ATE_H__
#define ate_print printk
#define ATEDBGPRINT DBGPRINT
#define EEPROM_SIZE 0x200
#ifdef CONFIG_STA_SUPPORT
#define EEPROM_BIN_FILE_NAME "/etc/Wireless/RT2860STA/e2p.bin"
#endif // CONFIG_STA_SUPPORT //
#define ATE_ON(_p) (((_p)->ate.Mode) != ATE_STOP)
/* RT2880_iNIC will define "RT2860". */
#define ATE_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) \
{ \
BBP_CSR_CFG_STRUC BbpCsr; \
int i, k; \
for (i=0; i<MAX_BUSY_COUNT; i++) \
{ \
RTMP_IO_READ32(_A, BBP_CSR_CFG, &BbpCsr.word); \
if (BbpCsr.field.Busy == BUSY) \
{ \
continue; \
} \
BbpCsr.word = 0; \
BbpCsr.field.fRead = 1; \
BbpCsr.field.BBP_RW_MODE = 1; \
BbpCsr.field.Busy = 1; \
BbpCsr.field.RegNum = _I; \
RTMP_IO_WRITE32(_A, BBP_CSR_CFG, BbpCsr.word); \
for (k=0; k<MAX_BUSY_COUNT; k++) \
{ \
RTMP_IO_READ32(_A, BBP_CSR_CFG, &BbpCsr.word); \
if (BbpCsr.field.Busy == IDLE) \
break; \
} \
if ((BbpCsr.field.Busy == IDLE) && \
(BbpCsr.field.RegNum == _I)) \
{ \
*(_pV) = (UCHAR)BbpCsr.field.Value; \
break; \
} \
} \
if (BbpCsr.field.Busy == BUSY) \
{ \
ATEDBGPRINT(RT_DEBUG_ERROR, ("BBP read R%d fail\n", _I)); \
*(_pV) = (_A)->BbpWriteLatch[_I]; \
} \
}
#define ATE_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V) \
{ \
BBP_CSR_CFG_STRUC BbpCsr; \
int BusyCnt; \
for (BusyCnt=0; BusyCnt<MAX_BUSY_COUNT; BusyCnt++) \
{ \
RTMP_IO_READ32(_A, BBP_CSR_CFG, &BbpCsr.word); \
if (BbpCsr.field.Busy == BUSY) \
continue; \
BbpCsr.word = 0; \
BbpCsr.field.fRead = 0; \
BbpCsr.field.BBP_RW_MODE = 1; \
BbpCsr.field.Busy = 1; \
BbpCsr.field.Value = _V; \
BbpCsr.field.RegNum = _I; \
RTMP_IO_WRITE32(_A, BBP_CSR_CFG, BbpCsr.word); \
(_A)->BbpWriteLatch[_I] = _V; \
break; \
} \
if (BusyCnt == MAX_BUSY_COUNT) \
{ \
ATEDBGPRINT(RT_DEBUG_ERROR, ("BBP write R%d fail\n", _I)); \
} \
}
/* RT2880_iNIC will define RT2860. */
#define EEPROM_SIZE 0x200
/* iNIC has its own EEPROM_BIN_FILE_NAME */
#ifdef CONFIG_STA_SUPPORT
#define EEPROM_BIN_FILE_NAME "/etc/Wireless/RT2860STA/e2p.bin"
#endif // CONFIG_STA_SUPPORT //
VOID rt_ee_read_all(
IN PRTMP_ADAPTER pAd,
OUT USHORT *Data);
VOID rt_ee_write_all(
IN PRTMP_ADAPTER pAd,
IN USHORT *Data);
INT Set_ATE_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_DA_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_SA_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_BSSID_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_CHANNEL_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_TX_POWER0_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_TX_POWER1_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_TX_Antenna_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_RX_Antenna_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_TX_FREQOFFSET_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_TX_BW_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_TX_LENGTH_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_TX_COUNT_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_TX_MCS_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_TX_MODE_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_TX_GI_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_RX_FER_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_Read_RF_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_Write_RF1_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_Write_RF2_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_Write_RF3_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_Write_RF4_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_Load_E2P_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_Read_E2P_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_Show_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_ATE_Help_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
#ifdef RALINK_ATE
#ifdef RALINK_28xx_QA
VOID ATE_QA_Statistics(
IN PRTMP_ADAPTER pAd,
IN PRXWI_STRUC pRxWI,
IN PRT28XX_RXD_STRUC p28xxRxD,
IN PHEADER_802_11 pHeader);
VOID RtmpDoAte(
IN PRTMP_ADAPTER pAdapter,
IN struct iwreq *wrq);
VOID BubbleSort(
IN INT32 n,
IN INT32 a[]);
VOID CalNoiseLevel(
IN PRTMP_ADAPTER pAdapter,
IN UCHAR channel,
OUT INT32 buffer[3][10]);
BOOLEAN SyncTxRxConfig(
IN PRTMP_ADAPTER pAdapter,
IN USHORT offset,
IN UCHAR value);
#if 0
INT Set_TxStart_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
#endif // 0 //
INT Set_TxStop_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_RxStop_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
#if 0
INT Set_EERead_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_EEWrite_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_BBPRead_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_BBPWrite_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
INT Set_RFWrite_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
#endif // end of #if 0 //
#endif // RALINK_28xx_QA //
#endif // RALINK_ATE //
VOID ATEAsicSwitchChannel(
IN PRTMP_ADAPTER pAd);
VOID ATEAsicAdjustTxPower(
IN PRTMP_ADAPTER pAd);
VOID ATEDisableAsicProtect(
IN PRTMP_ADAPTER pAd);
CHAR ATEConvertToRssi(
IN PRTMP_ADAPTER pAd,
IN CHAR Rssi,
IN UCHAR RssiNumber);
VOID ATESampleRssi(
IN PRTMP_ADAPTER pAd,
IN PRXWI_STRUC pRxWI);
#ifdef CONFIG_STA_SUPPORT
VOID RTMPStationStop(
IN PRTMP_ADAPTER pAd);
VOID RTMPStationStart(
IN PRTMP_ADAPTER pAd);
#endif // CONFIG_STA_SUPPORT //
#endif // __ATE_H__ //
drivers/staging/rt2860/rt_config.h
View file @ 063f22af
......@@ -72,10 +72,6 @@
#include "igmp_snoop.h"
#endif // IGMP_SNOOP_SUPPORT //
#ifdef RALINK_ATE
#include "rt_ate.h"
#endif // RALINK_ATE //
#ifdef CONFIG_STA_SUPPORT
#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
#ifndef WPA_SUPPLICANT_SUPPORT
......
drivers/staging/rt2860/rt_main_dev.c
View file @ 063f22af
......@@ -1274,15 +1274,6 @@ int rt28xx_packet_xmit(struct sk_buff *skb)
int status = 0;
PNDIS_PACKET pPacket = (PNDIS_PACKET) skb;
/* RT2870STA does this in RTMPSendPackets() */
#ifdef RALINK_ATE
if (ATE_ON(pAd))
{
RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_RESOURCES);
return 0;
}
#endif // RALINK_ATE //
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
......
drivers/staging/rt2860/rtmp.h
View file @ 063f22af
......@@ -183,89 +183,6 @@ extern UCHAR PRE_N_HT_OUI[];
#define MAXSEQ (0xFFF)
#ifdef RALINK_ATE
typedef struct _ATE_INFO {
UCHAR Mode;
CHAR TxPower0;
CHAR TxPower1;
CHAR TxAntennaSel;
CHAR RxAntennaSel;
TXWI_STRUC TxWI; // TXWI
USHORT QID;
UCHAR Addr1[MAC_ADDR_LEN];
UCHAR Addr2[MAC_ADDR_LEN];
UCHAR Addr3[MAC_ADDR_LEN];
UCHAR Channel;
UINT32 TxLength;
UINT32 TxCount;
UINT32 TxDoneCount; // Tx DMA Done
UINT32 RFFreqOffset;
BOOLEAN bRxFer;
BOOLEAN bQATxStart; // Have compiled QA in and use it to ATE tx.
BOOLEAN bQARxStart; // Have compiled QA in and use it to ATE rx.
BOOLEAN bFWLoading; // Reload firmware when ATE is done.
UINT32 RxTotalCnt;
UINT32 RxCntPerSec;
CHAR LastSNR0; // last received SNR
CHAR LastSNR1; // last received SNR for 2nd antenna
CHAR LastRssi0; // last received RSSI
CHAR LastRssi1; // last received RSSI for 2nd antenna
CHAR LastRssi2; // last received RSSI for 3rd antenna
CHAR AvgRssi0; // last 8 frames' average RSSI
CHAR AvgRssi1; // last 8 frames' average RSSI
CHAR AvgRssi2; // last 8 frames' average RSSI
SHORT AvgRssi0X8; // sum of last 8 frames' RSSI
SHORT AvgRssi1X8; // sum of last 8 frames' RSSI
SHORT AvgRssi2X8; // sum of last 8 frames' RSSI
UINT32 NumOfAvgRssiSample;
#ifdef RALINK_28xx_QA
// Tx frame
USHORT HLen; // Header Length
USHORT PLen; // Pattern Length
UCHAR Header[32]; // Header buffer
UCHAR Pattern[32]; // Pattern buffer
USHORT DLen; // Data Length
USHORT seq;
UINT32 CID;
THREAD_PID AtePid;
// counters
UINT32 U2M;
UINT32 OtherData;
UINT32 Beacon;
UINT32 OtherCount;
UINT32 TxAc0;
UINT32 TxAc1;
UINT32 TxAc2;
UINT32 TxAc3;
UINT32 TxHCCA;
UINT32 TxMgmt;
UINT32 RSSI0;
UINT32 RSSI1;
UINT32 RSSI2;
UINT32 SNR0;
UINT32 SNR1;
// control
//UINT32 Repeat; // Tx Cpu count
UCHAR TxStatus; // task Tx status // 0 --> task is idle, 1 --> task is running
#endif // RALINK_28xx_QA //
} ATE_INFO, *PATE_INFO;
#ifdef RALINK_28xx_QA
struct ate_racfghdr {
UINT32 magic_no;
USHORT command_type;
USHORT command_id;
USHORT length;
USHORT sequence;
USHORT status;
UCHAR data[2046];
} __attribute__((packed));
#endif // RALINK_28xx_QA //
#endif // RALINK_ATE //
#ifdef DOT11_N_SUPPORT
struct reordering_mpdu
{
......@@ -2936,10 +2853,6 @@ typedef struct _RTMP_ADAPTER
struct wificonf WIFItestbed;
#ifdef RALINK_ATE
ATE_INFO ate;
#endif // RALINK_ATE //
#ifdef DOT11_N_SUPPORT
struct reordering_mpdu_pool mpdu_blk_pool;
#endif // DOT11_N_SUPPORT //
......
drivers/staging/rt2860/rtmp_def.h
View file @ 063f22af
......@@ -1332,26 +1332,6 @@
#define INT_APCLI 0x0400
#define INT_MESH 0x0500
// Use bitmap to allow coexist of ATE_TXFRAME and ATE_RXFRAME(i.e.,to support LoopBack mode)
#ifdef RALINK_ATE
#define ATE_START 0x00 // Start ATE
#define ATE_STOP 0x80 // Stop ATE
#define ATE_TXCONT 0x05 // Continuous Transmit
#define ATE_TXCARR 0x09 // Transmit Carrier
#define ATE_TXCARRSUPP 0x11 // Transmit Carrier Suppression
#define ATE_TXFRAME 0x01 // Transmit Frames
#define ATE_RXFRAME 0x02 // Receive Frames
#ifdef RALINK_28xx_QA
#define ATE_TXSTOP 0xe2 // Stop Transmition(i.e., TXCONT, TXCARR, TXCARRSUPP, and TXFRAME)
#define ATE_RXSTOP 0xfd // Stop receiving Frames
#define BBP22_TXFRAME 0x00 // Transmit Frames
#define BBP22_TXCONT_OR_CARRSUPP 0x80 // Continuous Transmit or Carrier Suppression
#define BBP22_TXCARR 0xc1 // Transmit Carrier
#define BBP24_TXCONT 0x00 // Continuous Transmit
#define BBP24_CARRSUPP 0x01 // Carrier Suppression
#endif // RALINK_28xx_QA //
#endif // RALINK_ATE //
// WEP Key TYPE
#define WEP_HEXADECIMAL_TYPE 0
#define WEP_ASCII_TYPE 1
......
drivers/staging/rt2860/sta/connect.c
View file @ 063f22af
......@@ -234,13 +234,6 @@ VOID CntlIdleProc(
break;
case OID_802_11_DISASSOCIATE:
#ifdef RALINK_ATE
if(ATE_ON(pAd))
{
DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
break;
}
#endif // RALINK_ATE //
DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ, sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
......@@ -283,13 +276,6 @@ VOID CntlOidScanProc(
ULONG BssIdx = BSS_NOT_FOUND;
BSS_ENTRY CurrBss;
#ifdef RALINK_ATE
/* Disable scanning when ATE is running. */
if (ATE_ON(pAd))
return;
#endif // RALINK_ATE //
// record current BSS if network is connected.
// 2003-2-13 do not include current IBSS if this is the only STA in this IBSS.
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
......@@ -513,12 +499,6 @@ VOID CntlOidRTBssidProc(
MLME_DISASSOC_REQ_STRUCT DisassocReq;
MLME_JOIN_REQ_STRUCT JoinReq;
#ifdef RALINK_ATE
/* No need to perform this routine when ATE is running. */
if (ATE_ON(pAd))
return;
#endif // RALINK_ATE //
// record user desired settings
COPY_MAC_ADDR(pAd->MlmeAux.Bssid, pOidBssid);
pAd->MlmeAux.BssType = pAd->StaCfg.BssType;
......@@ -1973,12 +1953,6 @@ VOID LinkDown(
if (MONITOR_ON(pAd))
return;
#ifdef RALINK_ATE
// Nothing to do in ATE mode.
if (ATE_ON(pAd))
return;
#endif // RALINK_ATE //
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW);
RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled);
......
drivers/staging/rt2860/sta/rtmp_data.c
View file @ 063f22af
......@@ -749,22 +749,6 @@ BOOLEAN STARxDoneInterruptHandle(
break;
}
/* RT2870 invokes STARxDoneInterruptHandle() in rtusb_bulk.c */
#ifdef RALINK_ATE
if (ATE_ON(pAd))
{
pAd->ate.RxCntPerSec++;
ATESampleRssi(pAd, pRxWI);
#ifdef RALINK_28xx_QA
if (pAd->ate.bQARxStart == TRUE)
{
/* (*pRxD) has been swapped in GetPacketFromRxRing() */
ATE_QA_Statistics(pAd, pRxWI, pRxD, pHeader);
}
#endif // RALINK_28xx_QA //
RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_SUCCESS);
continue;
}
#endif // RALINK_ATE //
// Check for all RxD errors
Status = RTMPCheckRxError(pAd, pHeader, pRxWI, pRxD);
......@@ -1283,14 +1267,6 @@ VOID RTMPSendNullFrame(
ULONG Length;
PHEADER_802_11 pHeader_802_11;
#ifdef RALINK_ATE
if(ATE_ON(pAd))
{
return;
}
#endif // RALINK_ATE //
// WPA 802.1x secured port control
if (((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
(pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
......
drivers/staging/rt2860/sta/sync.c
View file @ 063f22af
......@@ -1018,14 +1018,6 @@ VOID PeerBeacon(
UCHAR AddHtInfoLen;
UCHAR NewExtChannelOffset = 0xff;
#ifdef RALINK_ATE
if (ATE_ON(pAd))
{
return;
}
#endif // RALINK_ATE //
if (!(INFRA_ON(pAd) || ADHOC_ON(pAd)
))
return;
......@@ -1811,14 +1803,6 @@ VOID InvalidStateWhenStart(
VOID EnqueuePsPoll(
IN PRTMP_ADAPTER pAd)
{
#ifdef RALINK_ATE
if (ATE_ON(pAd))
{
return;
}
#endif // RALINK_ATE //
if (pAd->StaCfg.WindowsPowerMode == Ndis802_11PowerModeLegacy_PSP)
pAd->PsPollFrame.FC.PwrMgmt = PWR_SAVE;
MiniportMMRequest(pAd, 0, (PUCHAR)&pAd->PsPollFrame, sizeof(PSPOLL_FRAME));
......
drivers/staging/rt2860/sta_ioctl.c
View file @ 063f22af
......@@ -274,40 +274,6 @@ static struct {
{"Debug", Set_Debug_Proc},
#endif
#ifdef RALINK_ATE
{"ATE", Set_ATE_Proc},
{"ATEDA", Set_ATE_DA_Proc},
{"ATESA", Set_ATE_SA_Proc},
{"ATEBSSID", Set_ATE_BSSID_Proc},
{"ATECHANNEL", Set_ATE_CHANNEL_Proc},
{"ATETXPOW0", Set_ATE_TX_POWER0_Proc},
{"ATETXPOW1", Set_ATE_TX_POWER1_Proc},
{"ATETXANT", Set_ATE_TX_Antenna_Proc},
{"ATERXANT", Set_ATE_RX_Antenna_Proc},
{"ATETXFREQOFFSET", Set_ATE_TX_FREQOFFSET_Proc},
{"ATETXBW", Set_ATE_TX_BW_Proc},
{"ATETXLEN", Set_ATE_TX_LENGTH_Proc},
{"ATETXCNT", Set_ATE_TX_COUNT_Proc},
{"ATETXMCS", Set_ATE_TX_MCS_Proc},
{"ATETXMODE", Set_ATE_TX_MODE_Proc},
{"ATETXGI", Set_ATE_TX_GI_Proc},
{"ATERXFER", Set_ATE_RX_FER_Proc},
{"ATERRF", Set_ATE_Read_RF_Proc},
{"ATEWRF1", Set_ATE_Write_RF1_Proc},
{"ATEWRF2", Set_ATE_Write_RF2_Proc},
{"ATEWRF3", Set_ATE_Write_RF3_Proc},
{"ATEWRF4", Set_ATE_Write_RF4_Proc},
{"ATELDE2P", Set_ATE_Load_E2P_Proc},
{"ATERE2P", Set_ATE_Read_E2P_Proc},
{"ATESHOW", Set_ATE_Show_Proc},
{"ATEHELP", Set_ATE_Help_Proc},
#ifdef RALINK_28xx_QA
{"TxStop", Set_TxStop_Proc},
{"RxStop", Set_RxStop_Proc},
#endif // RALINK_28xx_QA //
#endif // RALINK_ATE //
#ifdef WPA_SUPPLICANT_SUPPORT
{"WpaSupport", Set_Wpa_Support},
#endif // WPA_SUPPLICANT_SUPPORT //
......@@ -1945,14 +1911,6 @@ rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info,
memset(extra, 0x00, IW_PRIV_SIZE_MASK);
sprintf(extra, "\n\n");
#ifdef RALINK_ATE
if (ATE_ON(pAd))
{
sprintf(extra+strlen(extra), "Tx success = %ld\n", (ULONG)pAd->ate.TxDoneCount);
//sprintf(extra+strlen(extra), "Tx success without retry = %ld\n", (ULONG)pAd->ate.TxDoneCount);
}
else
#endif // RALINK_ATE //
{
sprintf(extra+strlen(extra), "Tx success = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart);
sprintf(extra+strlen(extra), "Tx success without retry = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart - (ULONG)pAd->WlanCounters.RetryCount.QuadPart);
......@@ -1968,22 +1926,6 @@ rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info,
sprintf(extra+strlen(extra), "Rx duplicate frame = %ld\n", (ULONG)pAd->WlanCounters.FrameDuplicateCount.QuadPart);
sprintf(extra+strlen(extra), "False CCA (one second) = %ld\n", (ULONG)pAd->RalinkCounters.OneSecFalseCCACnt);
#ifdef RALINK_ATE
if (ATE_ON(pAd))
{
if (pAd->ate.RxAntennaSel == 0)
{
sprintf(extra+strlen(extra), "RSSI-A = %ld\n", (LONG)(pAd->ate.LastRssi0 - pAd->BbpRssiToDbmDelta));
sprintf(extra+strlen(extra), "RSSI-B (if available) = %ld\n", (LONG)(pAd->ate.LastRssi1 - pAd->BbpRssiToDbmDelta));
sprintf(extra+strlen(extra), "RSSI-C (if available) = %ld\n\n", (LONG)(pAd->ate.LastRssi2 - pAd->BbpRssiToDbmDelta));
}
else
{
sprintf(extra+strlen(extra), "RSSI = %ld\n", (LONG)(pAd->ate.LastRssi0 - pAd->BbpRssiToDbmDelta));
}
}
else
#endif // RALINK_ATE //
{
sprintf(extra+strlen(extra), "RSSI-A = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi0 - pAd->BbpRssiToDbmDelta));
sprintf(extra+strlen(extra), "RSSI-B (if available) = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi1 - pAd->BbpRssiToDbmDelta));
......@@ -2889,13 +2831,6 @@ rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info,
{
if (bbpId <= 136)
{
#ifdef RALINK_ATE
if (ATE_ON(pAdapter))
{
ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
}
else
#endif // RALINK_ATE //
{
RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
}
......@@ -2921,15 +2856,6 @@ rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info,
{
if (bbpId <= 136)
{
#ifdef RALINK_ATE
if (ATE_ON(pAdapter))
{
ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
//Read it back for showing
ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
}
else
#endif // RALINK_ATE //
{
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
//Read it back for showing
......@@ -2964,13 +2890,6 @@ rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info,
{
if (strlen(extra) >= (IW_PRIV_SIZE_MASK - 10))
break;
#ifdef RALINK_ATE
if (ATE_ON(pAdapter))
{
ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
}
else
#endif // RALINK_ATE //
RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X ", bbpId, bbpId*2, regBBP);
if (bbpId%5 == 4)
......@@ -3298,13 +3217,6 @@ INT RTMPSetInformation(
}
break;
case OID_802_11_BSSID_LIST_SCAN:
#ifdef RALINK_ATE
if (ATE_ON(pAdapter))
{
DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
break;
}
#endif // RALINK_ATE //
Now = jiffies;
DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_BSSID_LIST_SCAN, TxCnt = %d \n", pAdapter->RalinkCounters.LastOneSecTotalTxCount));
......@@ -3406,13 +3318,6 @@ INT RTMPSetInformation(
}
break;
case OID_802_11_BSSID:
#ifdef RALINK_ATE
if (ATE_ON(pAdapter))
{
DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
break;
}
#endif // RALINK_ATE //
if (wrq->u.data.length != sizeof(NDIS_802_11_MAC_ADDRESS))
Status = -EINVAL;
else
......@@ -4029,13 +3934,6 @@ INT RTMPSetInformation(
break;
case OID_802_11_DISASSOCIATE:
#ifdef RALINK_ATE
if (ATE_ON(pAdapter))
{
DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
break;
}
#endif // RALINK_ATE //
//
// Set NdisRadioStateOff to TRUE, instead of called MlmeRadioOff.
// Later on, NDIS_802_11_BSSID_LIST_EX->NumberOfItems should be 0
......@@ -4617,16 +4515,6 @@ INT RTMPQueryInformation(
Status = -EFAULT;
}
break;
#ifdef RALINK_ATE
case RT_QUERY_ATE_TXDONE_COUNT:
DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_QUERY_ATE_TXDONE_COUNT \n"));
wrq->u.data.length = sizeof(UINT32);
if (copy_to_user(wrq->u.data.pointer, &pAdapter->ate.TxDoneCount, wrq->u.data.length))
{
Status = -EFAULT;
}
break;
#endif // RALINK_ATE //
case OID_802_11_BSSID_LIST:
if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
{
......@@ -4768,14 +4656,6 @@ INT RTMPQueryInformation(
Status = copy_to_user(wrq->u.data.pointer, &MediaState, wrq->u.data.length);
break;
case OID_802_11_BSSID:
#ifdef RALINK_ATE
if (ATE_ON(pAdapter))
{
DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
Status = NDIS_STATUS_RESOURCES;
break;
}
#endif // RALINK_ATE //
if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
{
Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Bssid, sizeof(NDIS_802_11_MAC_ADDRESS));
......@@ -5485,15 +5365,6 @@ INT rt28xx_sta_ioctl(
switch(cmd)
{
#ifdef RALINK_ATE
#ifdef RALINK_28xx_QA
case RTPRIV_IOCTL_ATE:
{
RtmpDoAte(pAd, wrq);
}
break;
#endif // RALINK_28xx_QA //
#endif // RALINK_ATE //
case SIOCGIFHWADDR:
DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCGIFHWADDR\n"));
memcpy(wrq->u.name, pAd->CurrentAddress, ETH_ALEN);
......@@ -6714,13 +6585,6 @@ VOID RTMPIoctlMAC(
UCHAR R66;
pAdapter->BbpTuning.bEnable = FALSE;
R66 = 0x26 + GET_LNA_GAIN(pAdapter);
#ifdef RALINK_ATE
if (ATE_ON(pAdapter))
{
ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
}
else
#endif // RALINK_ATE //
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
DBGPRINT(RT_DEBUG_TRACE,("turn off R17 tuning, restore to 0x%02x\n", R66));
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7