Commit 067bf748 authored by Viresh Kumar's avatar Viresh Kumar Committed by Chris Ball

mmc: sdhci-spear: add device tree bindings

This adds simple DT bindings for SDHCI SPEAr controller. It uses cd-gpios
from common mmc bindings.

This also fixes spear300-evb.dts with correct name for card detect binding.
Signed-off-by: default avatarViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: default avatarChris Ball <cjb@laptop.org>
parent 2abeb5c5
* SPEAr SDHCI Controller
This file documents differences between the core properties in mmc.txt
and the properties used by the sdhci-spear driver.
Required properties:
- compatible: "st,spear300-sdhci"
Optional properties:
- cd-gpios: card detect gpio, with zero flags.
If your board don't support these gpios then don't pass the entry.
Example:
sdhci@fc000000 {
compatible = "st,spear300-sdhci";
reg = <0xfc000000 0x1000>;
cd-gpios = <&gpio0 6 0>
};
......@@ -80,8 +80,7 @@ gmac: eth@e0800000 {
};
sdhci@70000000 {
int-gpio = <&gpio1 0 0>;
power-gpio = <&gpio1 2 1>;
cd-gpios = <&gpio1 0 0>;
status = "okay";
};
......
......@@ -103,8 +103,6 @@ gmac: eth@e0800000 {
};
sdhci@70000000 {
power-gpio = <&gpio0 2 1>;
power_always_enb;
status = "okay";
};
......
......@@ -20,6 +20,8 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/slab.h>
......@@ -68,8 +70,42 @@ static irqreturn_t sdhci_gpio_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
#ifdef CONFIG_OF
static struct sdhci_plat_data * __devinit
sdhci_probe_config_dt(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct sdhci_plat_data *pdata = NULL;
int cd_gpio;
cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
if (!gpio_is_valid(cd_gpio))
cd_gpio = -1;
/* If pdata is required */
if (cd_gpio != -1) {
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
dev_err(&pdev->dev, "DT: kzalloc failed\n");
return ERR_PTR(-ENOMEM);
}
}
pdata->card_int_gpio = cd_gpio;
return pdata;
}
#else
static struct sdhci_plat_data * __devinit
sdhci_probe_config_dt(struct platform_device *pdev)
{
return ERR_PTR(-ENOSYS);
}
#endif
static int __devinit sdhci_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct sdhci_host *host;
struct resource *iomem;
struct spear_sdhci *sdhci;
......@@ -110,8 +146,16 @@ static int __devinit sdhci_probe(struct platform_device *pdev)
goto put_clk;
}
/* overwrite platform_data */
if (np) {
sdhci->data = sdhci_probe_config_dt(pdev);
if (IS_ERR(sdhci->data)) {
dev_err(&pdev->dev, "DT: Failed to get pdata\n");
return -ENODEV;
}
} else {
sdhci->data = dev_get_platdata(&pdev->dev);
}
pdev->dev.platform_data = sdhci;
if (pdev->dev.parent)
......@@ -276,11 +320,20 @@ static int sdhci_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(sdhci_pm_ops, sdhci_suspend, sdhci_resume);
#ifdef CONFIG_OF
static const struct of_device_id sdhci_spear_id_table[] = {
{ .compatible = "st,spear300-sdhci" },
{}
};
MODULE_DEVICE_TABLE(of, sdhci_spear_id_table);
#endif
static struct platform_driver sdhci_driver = {
.driver = {
.name = "sdhci",
.owner = THIS_MODULE,
.pm = &sdhci_pm_ops,
.of_match_table = of_match_ptr(sdhci_spear_id_table),
},
.probe = sdhci_probe,
.remove = __devexit_p(sdhci_remove),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment