Merge branch 'cdc-ether'

Olivier Blin says:

====================
cdc-ether: handle promiscuous mode

Since kernel 3.16, my Lenovo USB network adapters (RTL8153) using
cdc-ether are not working anymore in a bridge.

This is due to commit c472ab68, which
resets the packet filter when the device is bound.

The default packet filter set by cdc-ether does not include
promiscuous, while the adapter seemed to have promiscuous enabled by
default.

This patch series allows to support promiscuous mode for cdc-ether, by
hooking into set_rx_mode.

Incidentally, maybe this device should be handled by the r8152 driver,
but this patch series is still nice for other adapters.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Oliver Neukum <oneukum@suse.de>

drivers/net/usb/cdc_ether.c

@@ -67,6 +67,35 @@ static const u8 mbm_guid[16] = {
 	0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a,
 };
 
+static void usbnet_cdc_update_filter(struct usbnet *dev)
+{
+	struct cdc_state	*info = (void *) &dev->data;
+	struct usb_interface	*intf = info->control;
+
+	u16 cdc_filter =
+	    USB_CDC_PACKET_TYPE_ALL_MULTICAST | USB_CDC_PACKET_TYPE_DIRECTED |
+	    USB_CDC_PACKET_TYPE_BROADCAST;
+
+	if (dev->net->flags & IFF_PROMISC)
+		cdc_filter |= USB_CDC_PACKET_TYPE_PROMISCUOUS;
+
+	/* FIXME cdc-ether has some multicast code too, though it complains
+	 * in routine cases.  info->ether describes the multicast support.
+	 * Implement that here, manipulating the cdc filter as needed.
+	 */
+
+	usb_control_msg(dev->udev,
+			usb_sndctrlpipe(dev->udev, 0),
+			USB_CDC_SET_ETHERNET_PACKET_FILTER,
+			USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			cdc_filter,
+			intf->cur_altsetting->desc.bInterfaceNumber,
+			NULL,
+			0,
+			USB_CTRL_SET_TIMEOUT
+		);
+}
+
 /* probes control interface, claims data interface, collects the bulk
  * endpoints, activates data interface (if needed), maybe sets MTU.
  * all pure cdc, except for certain firmware workarounds, and knowing
@@ -347,16 +376,8 @@ int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
 	 * don't do reset all the way. So the packet filter should
 	 * be set to a sane initial value.
 	 */
-	usb_control_msg(dev->udev,
-			usb_sndctrlpipe(dev->udev, 0),
-			USB_CDC_SET_ETHERNET_PACKET_FILTER,
-			USB_TYPE_CLASS | USB_RECIP_INTERFACE,
-			USB_CDC_PACKET_TYPE_ALL_MULTICAST | USB_CDC_PACKET_TYPE_DIRECTED | USB_CDC_PACKET_TYPE_BROADCAST,
-			intf->cur_altsetting->desc.bInterfaceNumber,
-			NULL,
-			0,
-			USB_CTRL_SET_TIMEOUT
-		);
+	usbnet_cdc_update_filter(dev);
+
 	return 0;
 
 bad_desc:
@@ -468,10 +489,6 @@ int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
 		return status;
 	}
 
-	/* FIXME cdc-ether has some multicast code too, though it complains
-	 * in routine cases.  info->ether describes the multicast support.
-	 * Implement that here, manipulating the cdc filter as needed.
-	 */
 	return 0;
 }
 EXPORT_SYMBOL_GPL(usbnet_cdc_bind);
@@ -482,6 +499,7 @@ static const struct driver_info	cdc_info = {
 	.bind =		usbnet_cdc_bind,
 	.unbind =	usbnet_cdc_unbind,
 	.status =	usbnet_cdc_status,
+	.set_rx_mode =	usbnet_cdc_update_filter,
 	.manage_power =	usbnet_manage_power,
 };
 
@@ -491,6 +509,7 @@ static const struct driver_info wwan_info = {
 	.bind =		usbnet_cdc_bind,
 	.unbind =	usbnet_cdc_unbind,
 	.status =	usbnet_cdc_status,
+	.set_rx_mode =	usbnet_cdc_update_filter,
 	.manage_power =	usbnet_manage_power,
 };
 

drivers/net/usb/usbnet.c

@@ -1052,6 +1052,21 @@ static void __handle_link_change(struct usbnet *dev)
 	clear_bit(EVENT_LINK_CHANGE, &dev->flags);
 }
 
+static void usbnet_set_rx_mode(struct net_device *net)
+{
+	struct usbnet		*dev = netdev_priv(net);
+
+	usbnet_defer_kevent(dev, EVENT_SET_RX_MODE);
+}
+
+static void __handle_set_rx_mode(struct usbnet *dev)
+{
+	if (dev->driver_info->set_rx_mode)
+		(dev->driver_info->set_rx_mode)(dev);
+
+	clear_bit(EVENT_SET_RX_MODE, &dev->flags);
+}
+
 /* work that cannot be done in interrupt context uses keventd.
  *
  * NOTE:  with 2.5 we could do more of this using completion callbacks,
@@ -1157,6 +1172,10 @@ kevent (struct work_struct *work)
 	if (test_bit (EVENT_LINK_CHANGE, &dev->flags))
 		__handle_link_change(dev);
 
+	if (test_bit (EVENT_SET_RX_MODE, &dev->flags))
+		__handle_set_rx_mode(dev);
+
+
 	if (dev->flags)
 		netdev_dbg(dev->net, "kevent done, flags = 0x%lx\n", dev->flags);
 }
@@ -1525,6 +1544,7 @@ static const struct net_device_ops usbnet_netdev_ops = {
 	.ndo_stop		= usbnet_stop,
 	.ndo_start_xmit		= usbnet_start_xmit,
 	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_set_rx_mode	= usbnet_set_rx_mode,
 	.ndo_change_mtu		= usbnet_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,

include/linux/usb/usbnet.h

@@ -78,6 +78,7 @@ struct usbnet {
 #		define EVENT_NO_RUNTIME_PM	9
 #		define EVENT_RX_KILL	10
 #		define EVENT_LINK_CHANGE	11
+#		define EVENT_SET_RX_MODE	12
 };
 
 static inline struct usb_driver *driver_of(struct usb_interface *intf)
@@ -159,6 +160,9 @@ struct driver_info {
 	/* called by minidriver when receiving indication */
 	void	(*indication)(struct usbnet *dev, void *ind, int indlen);
 
+	/* rx mode change (device changes address list filtering) */
+	void	(*set_rx_mode)(struct usbnet *dev);
+
 	/* for new devices, use the descriptor-reading code instead */
 	int		in;		/* rx endpoint */
 	int		out;		/* tx endpoint */