Commit 068655dc authored by Priit Laes's avatar Priit Laes Committed by Maxime Ripard

ARM: sun7i: dt: Add pll3 and pll7 clocks

Enable pll3 and pll7 clocks that are needed by display clocks.
Signed-off-by: default avatarPriit Laes <plaes@plaes.org>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 27dd9af6
...@@ -187,6 +187,15 @@ osc24M: clk@01c20050 { ...@@ -187,6 +187,15 @@ osc24M: clk@01c20050 {
clock-output-names = "osc24M"; clock-output-names = "osc24M";
}; };
osc3M: osc3M_clk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <8>;
clock-mult = <1>;
clocks = <&osc24M>;
clock-output-names = "osc3M";
};
osc32k: clk@0 { osc32k: clk@0 {
#clock-cells = <0>; #clock-cells = <0>;
compatible = "fixed-clock"; compatible = "fixed-clock";
...@@ -211,6 +220,22 @@ pll2: clk@01c20008 { ...@@ -211,6 +220,22 @@ pll2: clk@01c20008 {
"pll2-4x", "pll2-8x"; "pll2-4x", "pll2-8x";
}; };
pll3: clk@01c20010 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-pll3-clk";
reg = <0x01c20010 0x4>;
clocks = <&osc3M>;
clock-output-names = "pll3";
};
pll3x2: pll3x2_clk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
clock-mult = <2>;
clock-output-names = "pll3-2x";
};
pll4: clk@01c20018 { pll4: clk@01c20018 {
#clock-cells = <0>; #clock-cells = <0>;
compatible = "allwinner,sun7i-a20-pll4-clk"; compatible = "allwinner,sun7i-a20-pll4-clk";
...@@ -236,6 +261,22 @@ pll6: clk@01c20028 { ...@@ -236,6 +261,22 @@ pll6: clk@01c20028 {
"pll6_div_4"; "pll6_div_4";
}; };
pll7: clk@01c20030 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-pll3-clk";
reg = <0x01c20030 0x4>;
clocks = <&osc3M>;
clock-output-names = "pll7";
};
pll7x2: pll7x2_clk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
clock-mult = <2>;
clock-output-names = "pll7-2x";
};
pll8: clk@01c20040 { pll8: clk@01c20040 {
#clock-cells = <0>; #clock-cells = <0>;
compatible = "allwinner,sun7i-a20-pll4-clk"; compatible = "allwinner,sun7i-a20-pll4-clk";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment